Issued by 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Accredited to ISO/IEC 17065:2012 to provide product conformity certification Academy Place 1-9 Brook Street Brentwood Essex CM14 5NQ Contact: Mr Andrew Strachan Tel: +44 (0)1372 370900 Fax: +44 (0)1372 370999 E-Mail: mailing.uk@intertek.com Website: www.intertek.com Locations where certification activities covered by the above Accreditation are undertaken Intertek House Cleeve Road Leatherhead Surrey KT22 7SB United Kingdom Centre Court Meridian Business Park Leicester LE19 1WD United Kingdom Deeside Lane Chester CH1 6DD United Kingdom Davy Avenue Knowhill Milton Keynes Bucks MK5 8NL United Kingdon Assessment Manager: JJ Page 1 of 37
DETAIL OF ACCREDITATION Section Page 1 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS. 3 2 CABLES AND CORDS 3 3 CABLE TRUNKING, CONDUIT AND FITTINGS 4 4 CIRCUIT BREAKERS 5 5 CONTROLS AND COMPONENTS 6 6 ELECTRICAL WIRING ACCESSORIES 7 7 ELECTRICAL SYSTEMS 12 8 ENCLOSURES 12 9 FUSES 12 10 HOUSEHOLD APPLIANCES AND LUMINAIRES 14 11 RELAYS 14 12 SWITCHGEAR AND CONTROLGEAR 15 13 TRANSFORMERS AND REACTORS 18 14 INFORMATION TECHNOLOGY EQUIPMENT. 20 15 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE 21 16 ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES 21 17 CONSTRUCTION PRODUCTS 25 18 MICROGENERATION 25 19 FIRE & SECURITY PRODUCTS 26 20 ACCREDITATION FOR THE PURPOSE OF NOTIFIED BODY ACTIVITY 29 Where the BS EN or IEC standards have exact equivalents in EN s, those EN standards are also included in the accreditation. Assessment Manager: JJ Page 2 of 37
SECTION 1: AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS Audio, video and similar electronic apparatus. Safety requirements BS EN 60065:2002 IEC 60065:2001 SECTION 2: CABLES AND CORDS Insulated cables and flexible cords for use in high temperature zones BS 6141:1991 BS EN 50525-1:2011, BS EN 50525-2-11:2011, BS EN 50525-2-12, BS EN 50525-2-21:2011, BS EN 50525-2-71: 2011 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements IEC 60227-1:2007 Test Methods IEC 60227-2:2003 Non-sheathed cables for fixed wiring IEC 60227-3:1997 Sheathed cables for fixed wiring IEC 60227-4:1997 Flexible cables (cords) IEC60227-5:2011 Lift cables and cables for flexible connections IEC 60227-6:2001 Flexible cables screened and unscreened with two or more conductors IEC 60227-7:2003 Cables CENELEC HD 21 CENELEC HD 22 Assessment Manager: JJ Page 3 of 37
SECTION 3: CABLE TRUNKING, CONDUIT AND FITTINGS Non-metallic conduits and fittings for electrical installations Fittings and components of insulating material BS 4607-1:1984 Rigid conduits, fittings and components of insulating material BS 4607-5:1982 Cable trunking Steel surface trunking BS 4678-1:1971 (Withdrawn) BS EN 50085-1:2005 Steel underfloor (duct) trunking BS 4678-2:1973 Trunking made of insulating material BS 4678-4:1982 Specification for conduit systems for cable management General requirements BS EN 50086-1:1994 Rigid conduit systems Pliable conduit systems Flexible conduit systems Specification for conduit systems for cable management. Particular requirements. Conduit systems buried underground. Conduit systems for cable management. Outside diameters of conduits for electrical installations and threads for conduits and fittings. BS EN 50086-2-1:1996 (Withdrawn) BS EN 50086-2-2:1996 (Withdrawn) BS EN 50086-2-3:1996 (Withdrawn) BS EN 50086-2-4:1994 BS EN 60423:2007 IEC 60423:2007 Conduit systems for cable management General requirements BS EN 61386-1:2008 IEC 61386-1:2008 Rigid conduit systems BS EN 61386-21:2004 IEC 61386-21:2002 Assessment Manager: JJ Page 4 of 37
SECTION 3: CABLE TRUNKING, CONDUIT AND FITTINGS (cont d) Pliable conduit systems BS EN 61386-22:2004 IEC 61386-22:2002 Flexible conduit systems BS EN 61386-23:2004 IEC 61386-23:2002 Conduit systems buried underground BS EN 61386-24:2010 IEC 61386-24:2004 SECTION 4: CIRCUIT BREAKERS Specification for a.c. voltage-operated earth-leakage circuit breakers BS 842:1965 General requirements for circuit breakers for voltages above 1 000 V IEC 62271-100 Edition 2 2008 BS EN 62271-100:2009 Circuit breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c. operation BS EN 60898-1:2003 IEC 60898-1:2002 Circuit-breakers for a.c. and d.c. operation BS EN 60898-2:2006 IEC 60898-2:2000 Residual current operated circuit-breakers without integral overcurrent protection for household and similar used (RCCBs) BS EN 61008-1:2004 IEC 61008-1: 2010 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) BS EN 61009-1:2004 BS EN 61009-1:2012 IEC 61009:2010 Assessment Manager: JJ Page 5 of 37
SECTION 5: CONTROLS AND COMPONENTS General requirements for residual current operated protective devices IEC/TR 60755:2008 High-voltage Alternating- Current Circuit-Breakers CENELEC HD 348 Thermal-links. Requirements and application guide BS EN 60691:2003 IEC 60691:2002 Automatic controls for household and similar use BS EN 60730-1:2011 BS EN 60730-1:2001 IEC 60730-1:2010 (fourth edition) IEC 60730-1:1999 BS EN 60730-1:1995 IEC 60730-1:1993 BS EN 60730-1:1992 IEC 60730-1:1986 and the 2-XX series of standard Switches for appliances Switches for appliances. General requirements. BS EN 61058-1:2002+A2:2008 IEC 61058-1:2002 Cord switches BS EN 61058-2-1:2011 IEC 61009:2010 Independently mounted switches BS EN 61058-2-4:2005 IEC 61058-2-4:2003 Change-over selectors BS EN 61058-2-5:1995 IEC 61058-2-5:1994 Lamp controlgear BS EN 61347-1:2008 IEC 61347-1:2007 BS EN 61347-1:2001 IEC 61347-1:2000 and the -2-XX series of standard Assessment Manager: JJ Page 6 of 37
SECTION 5: CONTROLS AND COMPONENTS (cont d) Electrical Safety Related Electronic Controls Automatic Gas Burner Control Systems EN 298:2012 EN 13611:2007+A2:2011 SECTION 6: ELECTRICAL WIRING ACCESSORIES Ceiling roses BS 67:1987 Two-pole and earthing-pin plugs, socket-outlets and socket-outlet adapters BS 546:1950 13A rewireable and non-rewireable plugs BS 1363-1:2016 BS 1363-1:1995 +A4:2012 incorporating Corrig No. 1 IS 401: 1997 MS 589 Part 1: 1987 SS 145 Part 1: 1997 SASO 2203: 2003 SASO 443: 1997 13A switched and unswitched socket-outlets BS 1363-2:2016 BS 1363-2:1995 +A4:2012 MS 589 Part 2: 1987 SS 145 Part 2: 1997 SASO 2203: 2003 SASO 443: 1997 13A adapters BS 1363-3:2016 BS 1363-3:1995 +A4:2012 SS246: 1996 MS 589 Part 3: 1987 13A fused connection units switched and unswitched BS 1363-4:2016 BS 1363-4:1995 +A4:2012 MS 589 Part 4: 1987 Plugs and socket-outlets for household and similar purposes IEC 60884-1 Edition 3.2, 2013-02 (limitation: BS 1363 style products) Assessment Manager: JJ Page 7 of 37
SECTION 6: ELECTRICAL WIRING ACCESSORIES (cont d) Plugs and socket-outlets for household and similar purposes fused plugs IEC 60884-2-1 2nd Edition, 2006-10 (limitation: BS 1363 style products) Plugs and socket-outlets for household and similar purposes switched socket-outlets without interlock for fixed installations IEC 60884-2-3 2nd Edition, 2006-10 (limitation: BS 1363 style products) Fused conversion plugs BS 1363-5:2016 BS 1363-5:2008 Travel adaptors compatible with UK plug and socket system BS 8546:2016 Cooker control units BS 4177:1992 2-pin plugs and shaver socket-outlets BS 4573:1970 Boxes for the enclosure of electrical accessories BS 4662:2006 Electrical accessories not covered by other British s BS 5733:1995 BS 5733: 2010 Luminaire supporting couplers (LSC s) BS 6972:1988 Portable residual current devices BS 7071:1992 Socket outlets incorporating residual current devices BS 7288:1990 Bayonet lampholders with enhanced safety BS 7895:1997 Assessment Manager: JJ Page 8 of 37
SECTION 6: ELECTRICAL WIRING ACCESSORIES (cont d) Flat non-rewirable two-pole plugs 2.5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes BS EN 50075:1991 Specification for lamp caps and holders together with gauges for the control of interchangeability and safety Lamps caps BS EN 60061-1:1993 IEC 60061-DB-12M:2012 Lampholders BS EN 60061-2:1993 IEC 60061-2-DB-12M:2012 Gauges BS EN 60061-3:1993 IEC 60061-3-DB-12M:2012 Edison screw lampholders BS EN 60238:2004 IEC 60238:2004 Plugs, socket-outlets and couplers for industrial purposes BS EN 60309-1:1999 BS EN 60309-2:1999 IEC 60309-1:1999IEC 60309-2:1999 Appliance Connectors for household and similar general purposes General requirements BS EN 60320-1:2001 IEC 60320-1:2001 BS EN 60320-1:2015 IEC 60320-1 Edition 3.0 2015 Sewing machine couplers BS EN 60320-2-1:2001 IEC 60320-2-1:2000 Interconnection couplers for household and similar equipment BS EN 60320-2-2:1999 IEC 60320-2-2:1998 Assessment Manager: JJ Page 9 of 37
SECTION 6: ELECTRICAL WIRING ACCESSORIES (cont d) Appliance coupler with a degree of protection higher than IPX0 BS EN 60320-2-3:1999 IEC 60320-2-3:1998 Appliance couplers for household and similar general purposes. Couplers dependent on appliance weight for engagement. BS EN 60320-2-4:2006 IEC 60320-2-4:2005 Appliance couplers for household and similar general purposes - Part 3: sheets and gauges BS EN 60320-3:2014 IEC 60320-3:2014 Switches for household and similar fixed electrical installations BS EN 60669-1:1999 IEC 60669-1:1998 Electronic switches BS EN 60669-2-1:2004 IEC 60669-2-1:2002 Electromagnetic remote-control switches (RCS) BS EN 60669-2-2:2006 IEC 60669-2-2:2006 Time delay switches BS EN 60669-2-3:2006 IEC 60669-2-3:2006 Isolating switches BS EN 60669-2-4:2005 Cord-sets BS EN 60799:1998 IEC 60799:1998 Miscellaneous lampholders General requirements and tests BS EN 60838-1:2004 IEC 60838-1:2004 Lampholders S14 BS EN 60838-2-1:1997 IEC 60838-2-1:1994 Assessment Manager: JJ Page 10 of 37
SECTION 6: ELECTRICAL WIRING ACCESSORIES (cont d) Connectors for LED-modules BS EN 60838-2-2:2006 IEC 60838-2-2:2006 Connecting devices for low-voltage circuits for household and similar purposes General requirements BS EN 60998-1:2004 IEC 60998-1:2002 With screw-type clamping units BS EN 60998-2-1:2004 IEC 60998-2-1:2002 With screwless-type clamping units BS EN 60998-2-2:2004 IEC 60998-2-2:2002 With insulation-piercing clamping units BS EN 60998-2-3:2004 IEC 60998-2-3:2002 Twist-on connecting devices BS EN 60998-2-4:2005 IEC 60998-2-4:2004 Bayonet Lampholders BS EN 61184:2008 IEC 61184:2008 Cable Reels BS EN 61242:1997 IEC 61242:1995 Connectors BS EN 61984:2009 IEC 61984:2001 Sound signalling devices for household and similar purposes IEC 62080:2008 Assessment Manager: JJ Page 11 of 37
SECTION 6: ELECTRICAL WIRING ACCESSORIES (cont d) Electrical Wiring Accessories ASTA s ASTA 102 ASTA 104 ASTA 106 ASTA 107 ASTA 109 ASTA 120 ASTA 122 ASTA 124 ASTA 125 ASTA 129 ASTA 131 ASTA 132 ASTA 134 ASTA 138 ASTA 146 ASTA 150 ASTA 153 ASTA 154 ASTA 158 ASTA 160 SECTION 7: ELECTRICAL SYSTEMS Electrical systems in office furniture and office screens BS 6396:2008 Powertrack systems Powertrack systems. General requirements. BS EN 61534-1:2003 BS EN 61534-1:2011IEC 61534-1:2003 IEC 61534-1:2011 Powertrack systems intended for wall and ceiling mounting BS EN 61534-21:2006 IEC 61534-21:2006 Powertrack systems. Particular requirements for powertrack systems intended for on floor or under floor installation BS EN 61534-22:2009 IEC 61534-22:2009 Assessment Manager: JJ Page 12 of 37
SECTION 8: ENCLOSURES Degrees of protection provided by enclosures (IP code) BS EN 60529:1992 IEC 60529:1989 SECTION 9: FUSES Cartridge fuse-links (rated up to 5 amperes) for a.c. and d.c. service BS 646:1958 Cartridge fuses for a.c. circuits in domestic and similar premises BS 1361:1971 General purpose fuse links for domestic and similar purposes (primarily for use in plugs) BS 1362:1973 SS 167: 1977 Semi-enclosed electric fuses (ratings up to 100 amperes and 240 volts to earth) BS 3036:1958 Specification for high-voltage fuses for the external protection of shunt power capacitors BS 5564:1978 IEC 60549:1976 Single phase street lighting fuses (cut-outs) for lowvoltage public electricity distribution systems. 25 A rating for highway power supplies and street furniture. BS 7654:1997 High-voltage fuses Current-limiting fuses BS EN 60282-1:2009 IEC 60282-1:2009 Fuses for voltages exceeding 1000 V a.c. Expulsion fuses. BS 2692-2:1956 Fuses for voltages exceeding 1000 V a.c. Guide to the determination of short circuit power factor. BS 2692-3:1990 IEC 60282-3:1976 Assessment Manager: JJ Page 13 of 37
SECTION 9: FUSES (cont d) Miniature fuses Definitions for miniature fuses and general requirements for miniature fuse-links BS EN 60127-1:2006 IEC 60127-1:2006 Cartridge fuse-links BS EN 60127-2:2003 IEC 60127-2:2003 Specification for sub-miniature fuse-links BS EN 60127-3:1996 IEC 60127-3:1988 Universal modular fuse-links (UMF). Through-hole and surface mount types. BS EN 60127-4:2005 IEC 60127-4:2005 Fuse-holders for miniature cartridge fuse-links BS EN 60127-6:1994 IEC 60127-6:1994 Low-voltage fuses General requirements BS EN 60269-1:2007 BS 88-1:2007 IEC 60269-1:2006 Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to I. BS 88-2:2007 IEC 60269-3:2010 BS HD 60269-2: 2010, BS 88-2: 2010 Examples of standardized systems of fuses A to F BS 88-3:2007 IEC 60-269-3:2006 BS HD 60269-3: 2010, BS 88-3: 2010 Supplementary requirements for fuse-links for the protection of semiconductor devices BS EN 60269-4:2007 BS 88-4:2007 IEC 60269-4:2006 BS EN 60269-4: 2009, IEC 60269-4: 2009 Assessment Manager: JJ Page 14 of 37
SECTION 10: HOUSEHOLD APPLIANCES AND LUMINAIRES Specification for safety of electrically heated blankets, pads and similar flexible heating appliances for household use BS EN 60967:1991 (Withdrawn) IEC 60967:1988 (Withdrawn) Household and Similar Electrical Appliances BS EN 60335-1:2012 + A11:2014 BS EN 60335-1:2002 IEC 60335-1:2002 BS EN 60335-1:1995 IEC 60335-1:1991 and the -2-XX series of standard Luminaires BS EN 60598-1:2008 IEC 60598-1:2008 and the 2-XX series of standard SECTION 11: RELAYS Electrical relays Single input energizing quantity measuring relays with dependent or independent time BS EN 60255-3:1998 IEC 60255-3:1989 Insulation coordination for measuring relays and protection equipment. Requirements and tests. BS EN 60255-5:2001 IEC 60255-5:2000 Measuring relays and protection equipment BS EN 60255-6:1995 IEC 60255-6:1986 Thermal electrical relays BS EN 60255-8:1998 IEC 60255-8:1990 Specified time relays for industrial use. BS EN 61812-1:1997 IEC 61812-1:1996 Assessment Manager: JJ Page 15 of 37
SECTION 12: SWITCHGEAR and CONTROLGEAR Specification for distribution assemblies for reduced low voltage electricity supplies for construction and building sites BS 4363:1998 Line traps for power line carrier systems BS 4996:1973 IEC 60353:1989 Mining type flameproof supply and control units for use on systems up to 1100 V Direct-on-line motor starters BS 5126-1:1993 Circuit breaker units BS 5126-2:1993 Air-cooled lighting transformer units BS 5126-3:1993 Air-cooled transformers to power drilling machines BS 5126-4:1993 Low-voltage controlgear. Specification for semiconductor contactors (solid state contactors). Specification for controlgear for voltages up to and including 1000 V a.c. and 1200 V d.c. Additional requirements for contactors subject to certification. BS 5424-2:1987 BS 5424-3:1988 IEC 60158-3:1985 Surge arresters Non-linear resistor type gapped surge arrestors for a.c. systems Metal-oxide surge arresters without gaps for a.c. systems BS EN 60099-1:1994 IEC 60099-1:1991 BS EN 60099-4:2004 IEC 60099-4:2004 Specification for high-voltage alternating current switch-fuse combinations Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kv and above IEC 62271 203 Ed. 2: 2011 BS EN 62271-203:2004 Assessment Manager: JJ Page 16 of 37
SECTION 12: SWITCHGEAR and CONTROLGEAR (cont d) Specification for high-voltage switches On load tap changers BS EN 60214-1:2003 IEC 60214-1:2003 Switches for rated voltages above 1 kv and less than 52 kv High-voltage switches for rated voltages of 52 kv and above IEC 62271-103 Ed.1:2011 BS EN 62271-103:2011 BS EN 62271-104:209 IEC 62271-104:209 Low-voltage switchgear and control gear assemblies Type-tested and partially type-tested assemblies BS EN 60439-1:1999 IEC 60439-1:1999 AS/NZS 3439.1:2002 IEC 61439-1:2009 IEC 61439-1: 2011 BS EN 61439-1: 2011 Power switchgear and controlgear assemblies IEC 61439-2:2009 IEC 61439-2: 2011 BS EN 61439-2: 2011 Busbar trunking systems (busways) BS EN 60439-2:2000 IEC 60439-2:2000 AS/NZS 3439.2:2002 IEC 61439-6: 2012 BS EN 61439-6: 2012 Low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access to their use. Distribution boards. BS EN 60439-3:1991 IEC 60439-3:1990 IEC 61439-3: 2012 BE EN 61439-3: 2012 Assemblies for construction sites (ACS) BS EN 60439-4:2004 IEC 60439-4:2004 Assemblies for power distribution in public networks BS EN 60439-5:2006 IEC 60439-5:2006 IEC 61439-5: 2010 BS EN 61439-5: 2011 Assessment Manager: JJ Page 17 of 37
SECTION 12: SWITCHGEAR and CONTROLGEAR (cont d) Low voltage assemblies internal arc testing IEC/TR 61641:2008 High voltage switchgear and controlgear BS EN 62271-1:2008 IEC 62271-1:2007 Synthetic testing BS EN 62271-101:2013 IEC 62271-101:2012 Alternating current disconnectors and earthing switches BS EN 62271-102:2002 IEC 62271-102:2001 AC switch-fuse combinations BS EN 62271-105:2012 IEC 62271-105:2002 IEC 62271-105:2012 Power Capacitors LV power factor correction banks IEC 61921: 2003 BS EN 61921: 2003 AC metal-enclosed switchgear and controlgear for rated voltages above 1 kv and up to and including 52 kv BS EN 62271-200:2012 IEC 62271-200:2011 High-voltage/ low-voltage prefabricated substation BS EN 62271-202:2007 IEC 62271-202:2006 Specification for low-voltage switchgear and controlgear General rules BS EN 60947-1:2007 IEC 60947-1:2007 Circuit-breakers BS EN 60947-2:2006 IEC 60947-2:2006 Switches, disconnectors, switch-disconnectors and fusecombination units Contactors and motor-starters. Electromechanical contactors and motor-starters. BS EN 60947-3:2009 IEC 60947-3:2008 BS EN 60947-4-1:2010 IEC 60947-4-1:2009 AC semiconductor motor controllers and starters BS EN 60947-4-2:2012 IEC 60947-4-2:2011 Assessment Manager: JJ Page 18 of 37
SECTION 12: SWITCHGEAR and CONTROLGEAR (cont d) Specification for low-voltage switchgear and controlgear (cont d) AC semiconductor controllers and contactors for non-motor loads BS EN 60947-4-3:2000 IEC 60947-4-3:1999 SECTION 13: TRANSFORMERS AND REACTORS Resistance welding water-cooled transformers of the press package and portable types BS 4819-1:1989 BS 4819-2:1989 ISO 7284-1984 Power transformers General BS EN 60076-1:2011 IEC 60076-1:2011 Power transformers. Temperature rise. BS EN 60076-2:2011 IEC 60076-2:2011 Insulation levels, dielectric tests and external clearances in air Guide to the lightning impulse and switching impulse testing. Power transformers and reactors. BS EN 60076-3:2013 IEC 60076-3:2013 BS EN 60076-4:2002 IEC 60076-4:2002 Ability to withstand short-circuit BS EN 60076-5:2006 IEC 60076-5:2006 Application guide BS IEC 60076-8:1997 IEC 60076-8:1997 Determination of sound levels BS EN 60076-10:2001 IEC 60076-10:2001 Dry-type transformers BS EN 60076-11:2004 IEC 60076-11:2004 Self-protected liquid-filled transformers BS EN 60076-13:2006 IEC 60076-13:2006 Assessment Manager: JJ Page 19 of 37
SECTION 13: TRANSFORMERS AND REACTORS (cont d) Tap-changers. Performance requirements and test methods. BS EN 60214-1:2003 IEC 60214-1:2003 Reactors BS EN 60076-6:2008 IEC 60076-6:2007 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1kV General. Performance, testing and rating. Safety requirements. Guide for installation and operation. BS EN 60831-1:1998 IEC 60831-1:1996 Ageing test, self-healing test and destruction test BS EN 60831-2:1996 IEC 60831-2:1995 Convertor transformers. Transformers for industrial applications Safety of power transformers, power supply units and similar products BS EN 61378-1:1999 IEC 61378-1:1997 BS EN 61558-1:2005 IEC 61558-1:2005 BS EN 61558-1:1998 IEC 61558-1:1997 and the -2-XX series of standard Transformers, Reactors, etc CENELEC HD 398.5 S1 1:1983 CENELEC HD 464 S1:1988 CENELEC HD 553 S2:1993 Instrument Transformers Instrument Transformers General Requirements BS EN 61869-1:2009 IEC 61869-1:2007 Instrument Transformers Current transformers BS EN 61869-2:2012 IEC 61869-2:2012 Instrument Transformers Inductive voltage transformers BS EN 61869-3:2011 IEC 61869-3:2011 Instrument Transformers Combined transformers IEC 61869-4:2013 Assessment Manager: JJ Page 20 of 37
SECTION 14: INFORMATION TECHNOLOGY EQUIPMENT Information technology equipment. Safety. General requirements. Information technology equipment. Safety. Remote power feeding. Information technology equipment. Safety. Equipment installed outdoors. Information technology equipment. Safety. Large data storage equipment. BS EN 60950-1:2006 IEC 60950-1:2005 BS EN 60950-1:2002 IEC 60950-1:2001 BS EN 60950-21:2003 IEC 60950-21:2002 BS EN 60950-22:2006 IEC 60950-22:2005 BS EN 60950-23:2006 IEC 60950-23:2005 SECTION 15: ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE Electrical equipment for measurement, control and laboratory use BS EN 61010-1:2001 IEC 61010-1:2001 Laboratory equipment for the heating of materials BS EN 61010-2-010:2003 IEC 61010-2-010:2003 Hand held probe assemblies for electrical measurement and test Hand held current clamps for electrical measurement and test Automatic and semi-automatic laboratory equipment for analysis and other purposes BS EN 61010-031:2002 IEC 61010-031:2002 BS EN 61010-2-032:2002 IEC 61010-2-032:2002 IEC 61010-2-081: 2002 BS EN 61010-2-081: 2002 In-vitro diagnostic (IVD) medical equipment IEC 61010-2-101: 2002 BS EN 61010-2-101: 2002 Assessment Manager: JJ Page 21 of 37
SECTION 16: ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES Electrical apparatus for explosive gas atmospheres: General requirements BS EN 60079-0:2006 IEC 60079-0:2006 BS EN 60079-0:2004 IEC 60079-0:2004 Oil immersion o BS EN 50015:1998 BS EN 50015:1994 IEC 60079-6:1995 Pressurised apparatus p BS EN 60079-2:2007 IEC 60079-2:2001 Powder filling q IEC 60079-5:2003 BS EN 50017:1998 IEC 60079-5:1997 BS EN 50017:1994 Flameproof enclosures d BS EN 60079-1:2007 IEC 60079-1:2003 Increased safety e BS EN 60079-7:2007 IEC 60079-7:2006 BS EN 60079-7:2003 Intrinsic safety i BS EN 60079-11:2007 IEC 60079-11:1999 BS EN 50020:2002 Encapsulation m BS EN 60079-18:2004 IEC 60079-18:2004 Type of protection n BS EN 60079-15:2005 IEC 60079-15:2005 BS EN 60079-15:2003 IEC 60079-15:2001 Assessment Manager: JJ Page 22 of 37
SECTION 16: ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES (cont d) Equipment Group II Category IG/Zone 0 BS EN 60079-26:2007 Electrical Apparatus for use in dust atmospheres General requirements BS EN 61241-0:2006 EN 61241-0:2006 IEC 61241-0:2004 Protection by enclosure td BS EN 61241-1:2004 IEC 61241-1:2004 Non electrical equipment - General requirements BS EN 13463-1:2001 Non electrical equipment - Flow restriction fr BS EN 13463-2:2004 Non electrical equipment - Flameproof enclosure d BS EN 13463-3:2005 Non electrical equipment - Constructural safety c BS EN 13463-5:2003 Non electrical equipment - Control of ignition source b BS EN 13463-6:2005 Explosion prevention basic concepts and methodology BS EN 1127-1:1998 Metering pumps and fuel dispensers BS EN 13617-1:2004 Electric surface heating devices BS 6351:Part 1:1983 Metallic cabling glands BS 6121:Part 1:2005 Petroleum Forecourt Dispensers BS 7117-1:1991 (withdrawn) BS 7117-2:1991 (withdrawn) BS 7117-3:1991 (withdrawn) Assessment Manager: JJ Page 23 of 37
SECTION 16: ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES (cont d) Electrical apparatus for the detection and measurements of combustible gases: General requirements BS EN 50054:1999 (withdrawn) Performance requirements for Group I apparatus indicating up to 5% (V/V) methane in air BS EN 50055:1999 (withdrawn) Performance requirements for Group I apparatus indicating up to 100%(V/V) methane in air BS EN 50056:1999 (withdrawn) Performance requirements for Group II apparatus indicating up to 100% lower explosive limit BS EN 50057:1999 (withdrawn) Performance requirements for Group II apparatus indicating up to 100% (V/V) gas BS EN 50058:1999 (withdrawn) Electrical apparatus for use in the presence of combustible dust BS EN 50281-1-1:1999 Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust BS EN 50303:2000 Reciprocating Internal Combustion Engines for use in potentially explosive atmospheres Group II engines for flammable gas and vapour atmospheres BS EN 1834-1:2000 Reciprocating Internal Combustion Engines for use in potentially explosive atmospheres (cont d) Group I engines for workings susceptible to firedamp and/or combustible dust BS EN 1834-2:2000 Group II engines for flammable dust atmospheres BS EN 1834-3:2000 Assessment Manager: JJ Page 24 of 37
SECTION 16: ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES (cont d) Small Craft; Electrical Devices: Protection against ignition of surrounding flammable gases BS EN 28846:1993 Flame arrestors BS 7244:1990 BS EN 12874:2001 SECTION 17: CONSTRUCTION PRODUCTS Manufacture of Fire Doors & Door Hardware including Metal, Composite, Timber leaves and doorsets. Hardware to include Hinges, Locks & Latches, door closers and hold open devices EN 1634-1:2008 EN 1634-2:2008 ISO 3008:2006 EN 1935:2002 EN 12209:2003 EN 1154:1996 EN 1155:1997 Intertek Document 09-01 Manufacture of Passive Fire s BS 476-21:1987 BS 476-22:1987 ENV 13381-4:2002 ENV 13381-8:2008 EN 13501-2:2007 Intertek Document 09-02 Installation of passive Fire s Intertek Document 09-03 Where the BS EN or IEC standards have exact equivalents in EN s, those EN standards are also included in the accreditation. Assessment Manager: JJ Page 25 of 37
SECTION 18: MICROGENERATION MCS Certification Solar Collectors Solar Photovoltaic Panels Micro & Small Wind Turbines Heat Pumps MCS scheme Requirements; (DECC) MCS 004 - Solar Collectors MCS 005 - Solar Photovoltaic Panels MCS 006 - Micro & Small Wind Turbines MCS 007 - Heat Pumps MCS 010 - Generic FPC Requirements MCS 011 - Testing and Acceptance Criteria Micro Hydroturbines MCS 016 & 018 Micro Hydroturbines SECTION 19: FIRE & SECURITY PRODUCTS Fire Control and Indicating Equipment Sounders Power Supply Equipment Heat detectors Smoke detectors Flame detectors Manual Call points Beam smoke Compatability Voice Alarm Control and Indicating Equipment Short circuit protection devices Input / output devices Aspirating smoke detectors Transmissions equipment Beacons Loudspeakers Radio devices Duct smoke alarms Domestic smoke alarms Carbon Monoxide Point Detectors Multi sensor smoke/heat Multi sensor smoke/co Multi-sensor smoke, carbon monoxide and optionally heat sensors Carbon Monoxide detectors EA CertAlarm Sector scheme (Type 5 schemes) TickMark Scheme (Type 5 schemes Fire EN 54-2:1997 +A1 EN 54-3:2001 +A1,A2 EN 54-4:1998 +A1,A2 EN 54-5:2001 +A1 EN 54-7:2001 +A1,A2 EN 54-10:2002 +A1 EN 54-11:2001 + A1 EN 54-12:2002 EN 54-13:2005 EN 54-16:2008 EN 54-17:2005 EN 54-18:2005 EN 54-20: 2006 EN 54-21:2006 EN 54-23:2010 EN 54-24: 2008 EN 54-25:2008 EN 54-27:2008 EN 14604:2005 EN 54-26:2015 EN 54-29:2015 EN 54-30:2015 EN 54-31:2014+A1 2016 EN 50291-1:2010 +A1:2012 Assessment Manager: JJ Page 26 of 37
SECTION 19: FIRE & SECURITY PRODUCTS (cont d) EA CertAlarm Sector scheme (Type 5 schemes) TickMark Scheme (Type 5 schemes) Security EMC standard for Fire, Intruder and Social Alarms EMC standard for Fire, Intruder and Social Alarms Environmental tests System Requirements Control and Indicating Equipment Warning devices (sounders) Power Supplies Passive Infrared Detectors Microwave detectors Combined passive and microwave detectors Combined passive and ultrasonic detectors Opening contacts (magnets) Radio equipment use for interconnection Alarm Verification Supervised Premises Transceiver General requirements System requirements General requirements General requirements for alarm transmission equipment Requirements for alarms using dedicated paths Requirements using Public Switched Telephone Networks Requirements with voice communicators using PSTN Requirement for packet switched network PSN Requirements for Supervised Premises Transmission General requirements Requirements for alarms using dedicated paths Requirements using Public Switched Telephone Networks Requirements with voice communicators using PSTN Social Alarms system requirements Social alarms trigger devices Social alarms local unit and controller Social alarms interconnection and communication Security EN 50130-4:2005+A1,A2 EN 50130-4:2011 EN 50130-5:1999 EN 50131-1:2006+A1 EN 50131-3:2009 EN 50131-4: 2009 EN 50131-6: 2008 EN 50131-2-2:2008 EN 50131-2-3:2008 EN 50131-2-4:2008 EN 50131-2-5:2008 EN 50131-2-6:2008 EN 50131-5-3:2005+A1 pren 50131-9: April 2011 pren 50131-10: April 2011 EN 50133-1:1997 EN 50133-2-1:2000 EN 50136-1:2012 EN 50136-1-1: 1998+A1,A2 EN 50136-1-2:1998 EN 50136-1-3:1998 EN 50136-1-4:1998 EN 50136-1-5:2008 EN 50136-2:2013 EN 50136-2-1:1998 EN 50136-2-2:1998 EN 50136-2-3:1998 EN 50136-2-4:1998 EN 50134-1:2002 EN 50134-2:2000 EN 50134-3:2001 EN 50134-5:2004 Assessment Manager: JJ Page 27 of 37
SECTION 19: FIRE & SECURITY PRODUCTS (cont d) EA CertAlarm Sector scheme (Type 5 schemes) TickMark Scheme (Type 5 schemes) Rules for alarm transmission system Burglar Alarms Security EMC standard for Fire, Intruder and Social Alarms EMC standard for Fire, Intruder and Social Alarms Environmental tests System Requirements Control and Indicating Equipment Warning devices (sounders) Power Supplies Passive Infrared Detectors Microwave detectors Combined passive and microwave detectors Combined passive and ultrasonic detectors Opening contacts (magnets) Radio equipment use for interconnection Alarm Verification Supervised Premises Transceiver General requirements System requirements General requirements General requirements for alarm transmission equipment Requirements for alarms using dedicated paths Requirements using Public Switched Telephone Networks Requirements with voice communicators using PSTN Requirement for packet switched network PSN Requirements for Supervised Premises Transmission General requirements Requirements for alarms using dedicated paths Requirements using Public Switched Telephone Networks Requirements with voice communicators using PSTN Social Alarms system requirements Social alarms trigger devices Social alarms local unit and controller Social alarms interconnection and communication SSF 114 issue 2:2009 Security EN 50130-4:2005+A1,A2 EN 50130-4:2011 EN 50130-5:1999 EN 50131-1:2006+A1 EN 50131-3:2009 EN 50131-4: 2009 EN 50131-6: 2008 EN 50131-2-2:2008 EN 50131-2-3:2008 EN 50131-2-4:2008 EN 50131-2-5:2008 EN 50131-2-6:2008 EN 50131-5-3:2005+A1 pren 50131-9: April 2011 pren 50131-10: April 2011 EN 50133-1:1997 EN 50133-2-1:2000 EN 50136-1:2012 EN 50136-1-1: 1998+A1,A2 EN 50136-1-2:1998 EN 50136-1-3:1998 EN 50136-1-4:1998 EN 50136-1-5:2008 EN 50136-2:2013 EN 50136-2-1:1998 EN 50136-2-2:1998 EN 50136-2-3:1998 EN 50136-2-4:1998 EN 50134-1:2002 EN 50134-2:2000 EN 50134-3:2001 EN 50134-5:2004 Rules for alarm transmission system Burglar Alarms SSF 114 issue 2:2009 See next page for Section 20: ACCREDITATION FOR THE PURPOSE OF NOTIFIED BODY ACTIVITY Assessment Manager: JJ Page 28 of 37
SECTION 20: ACCREDITATION FOR THE PURPOSE OF NOTIFIED BODY ACTIVITY Accreditation for the purpose of Notified Body Activity taking into account EA2/17 Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s The Construction s RegulationEU) No 305/2011 Annex V- Certification Body (AVCP) System 1 Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Control and indicating devices (fire safety), 96/577/EC EN 54-16:2008 EN 54-2:1997 EN 54-2:1997/A1:2006 EN 54-2:1997/AC:1999 Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Manual call points (fire safety), 96/577/EC EN 54-11:2001 EN 54-11:2001/A1:2005 Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Input/output devices (fire safety), 96/577/EC EN 54-18:2005 EN 54-18:2005/AC:2007 EN 54-24:2008 EN 54-25:2008 EN 54-25:2008/AC:2010 EN 54-25:2008/AC:2012 Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Alarm devices (fire safety), 96/577/EC EN 14604:2005 EN 14604:2005/AC:2008 EN 54-3:2001 EN 54-3:2001/A1:2002 EN 54-3:2001/A2:2006 EN 54-23:2010 Assessment Manager: JJ Page 29 of 37
Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s The Construction s Regulation (EU) No 305/2011 (cont d) Annex V- Certification Body (AVCP) System 1 (cont d) Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Short circuit isolators (fire safety), 96/577/EC EN 54-17:2005 EN 54-17:2005/AC:2007 Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke, heat and flame detectors (fire safety), 96/577/EC EN 54-10:2002 EN 54-10:2002/A1:2005 EN 54-12:2002 EN 54-5:2000 EN 54-5:2000/A1:2002 EN54-7:2000 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006 Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Foam systemskits (fire safety), 96/577/EC EN 54-7:2000 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006 Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Fire alarm systems-kits (fire safety), 96/577/EC EN 54-21:2006 Assessment Manager: JJ Page 30 of 37
Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s The Construction s Regulation (EU) No 305/2011 (cont d) Annex V- Certification Body (AVCP) System 1 (cont d) Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Combined fire detection and fire alarm systems-kits (fire safety), 96/577/EC EN 54-20:2006 EN 54-20:2006/AC:2008 Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Power supplies (fire detection/alarm components) (fire safety), 96/577/EC EN 54-4:1997 EN 54-4:1997/A1:2002 EN 54-4:1997/A2:2006 EN 54-4:1997/AC:1999 Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Building hardware related to doors, gates and windows (fire/smoke compartmentation and on escape routes), 99/93/EC EN 1125:2008 EN 1154:1996/A1:2002 EN 1154:1996/A1:2002/AC:2006 EN 1155:1996/A1:2002/AC:2006 EN 1155:1997/A1:2002 EN 12209:2003 EN 12209:2003/AC:2005 EN 179:2008 EN 1935:2002 EN 1935:2002/AC:2003 Doors, windows, shutters, blinds, gates and related building hardware (1/1) 2011/246/EU EN 14846:2008 EN 16034:2014 Assessment Manager: JJ Page 31 of 37
Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s Noise Emission in the Environment by Equipment for use Outdoors Directive 2000/14/EC as amended by 2005/88/EC Implemented in UK Law by: SI 1701/2001The Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001 (as amended by amending regulations SI 2001 No 3958 and SI 2005 No 3525) Internal Control of ion (Annex VI) (Schedule 9 of the SI) Unit Verification (Annex VII) (Schedule 10 of the SI) Schedule 1 for: Lawnmowers Lawn Trimmers/Lawn Edge Trimmers Power Generators Welding Generators Compressors Motor Hoes Conformity assessment procedures in accordance with Article 14 and Annexes VI and VII of the Directive and Regulation 10 and Schedules 9 and 10 of the SI Assessment Manager: JJ Page 32 of 37
Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s Machinery Directive 2006/42/EC Implemented in UK Law by: SI 2008 No. 1597 The Supply of Machinery (Safety) Regulations 2008 EC typeexamination (Annex IX Annex IV A, Machinery, Items 1-17, B, Safety Components, Items 1-5 of Schedule 4 Essential Health and Safety requirements Annex I of the Directive and Schedule 2 Part 1 Annex I of the Regulations. Gas Appliance Directive (90/396/EEC) Implemented in the UK by:- Gas Appliances (Safety) Regulations 1995 (SI 1995/1629) Annex II.1 EC Type Examination Annex II.2 EC Declartion of Conformity to Type Annex II.3 EC Declartion of Conformity to Type (guarantee of ion Quality) Annex II.5 EC Verification Annex II.6 EC Unit Verification Appliances burning Gaseous fuels used for:- Cooking Heating (up to 70kw) Hot water ion Refrigeration Lighting Washing Fittings Safety Devices Controlling devices (excluding electronic controls) Regulating Devices Sub assemblies Examination and approval against the Essential Requirements of Annex 1 Examination and approval of the Quality System in accordance with Annex II of the Directive Assessment Manager: JJ Page 33 of 37
Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s Gas Appliance Regulation (EU) 2016/426 Annex III.1 Module B: EU Type- Examination Annex III.2 Module C2: Conformity to Type Based on internal production control Domestic/Commercial Appliances burning gaseous fuels used for cooking, heating (up to 70W), hot water production, refrigeration, lighting, and washing; Examination and approval against the Essential Requirements of Annex 1 and assessment of quality system in accordance with the relevant Module. Annex III.3 Module D: Conformity to Type Based on QA of the production process Fittings: Safety devices, controlling devices, regulating devices, and sub-assemblies Annex III.5 Conformity to type based on Verification Annex III.6 Conformity based on unit Verification Assessment Manager: JJ Page 34 of 37
Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s Electromagnetic Compatibility Directive 2004/108/EC Implemented in UK Law by: SI 2006 No. 3418 The Electromagnetic Compatibility Regulations 2006 EMC Directive (2014/30/EU) Radio Equipment and Telecommunications Terminal Equipment Directive 99/5/EC Implemented in UK Law by: The Radio Equipment and Telecommunications Terminal Equipment Regulations 2000 SI 2000 No 730 Radio Equipment Directive (2014/53/EU) COUNCIL DIRECTIVE 92 / 42 / EEC on efficiency requirements for new hotwater boilers fired with liquid or gaseous fuels Technical Documentation review EU-type examination (Annex III) Annex IV Schedule 4 Technical Construction File EU-type examination (Annex III) Module B (Annex III): EC typeexamination Module C (Annex IV): Conformity to type Module D (Annex IV): ion quality assurance (operate an approved quality system for production, final appliance inspection and testing) Industrial Equipment Information Technology Equipment Alarm Systems AV Equipment Railway Systems Laboratory and Test Equipment Transmission Systems Automotive Systems Domestic Appliances Military Equipment Citizens Band Cordless Telephone Mobile (Cellular) Telephone Handsets Private/Professional Mobile Radio Radio Frequency Identification Satellite Earth Station Short Range Devices Telemetry/ Telecommand Wireless Microphone Hot-water boilers fired with liquid or gaseous fuels with a rated output of no less than 4 kw and no more than 400 kw Essential Requirements Annex I of the Directive Essential Requirement Article 3 of the Directive and Schedule 3 of the Regulations Excluding Articles 3.1a Examination and approval against the Essential Requirements of Annex 1 and assessment of quality system in accordance with the relevant Module. Assessment Manager: JJ Page 35 of 37
Directive / Regulation Conformity Assessment procedure/ Module/article Category of products or individual products Essential requirements: specification / Properties/s Equipment Intended for use in Potentially Explosive Atmospheres (ATEX) 94/9/EC (As Amended) Implemented in UK law by: The Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres Regulations 1996, No 192 (As Amended) Equipment Intended for use in Potentially Explosive Atmospheres (ATEX) 2014/34/EU (As Amended) Annex III / Schedule 6 EC-Type examination Annex IV /Schedule 7 ion QA Annex V / Schedule 8 verification Annex VI / Schedule 9 Conformity to type Annex VII / Schedule 10 QA Annex IX / Schedule 12 Unit verification Equipment in :- Equipment group I, categories M1 and M2. Equipment group II, categories 1, 2 and 3. Essential Health and Safety Requirements, Annex II of the Directive and Schedule 3 of the Regulations Article 8 (1) (b) (ii), Regulation 10 (3)(b) iii) Storage of Technical files Acknowledgment of receipt and retention of technical files Australian and New Zealand MRA Conformity Assessment Body Low Voltage s Sector Machinery s Sector Designation as a CAB in accordance with Chapter 1 END Assessment Manager: JJ Page 36 of 37
Overseas Locations where key notifed body activities covered by the above Accreditation are undertaken KL 1 3933 US Route 11 Cortland NY 13045 KL 2 1809 10 th Street Suite 400 Plano TX 75074 KL 3 Block E No 7-2 Guang Dong Science Park Caipin Road Guangzhou Science City GETDD Guangzhou Pr China KL 4 6/F Block D Huahan Building Langshan Road Nanshan District Shenzhen China KL 5 2/F Garment Centre 576 Castle Peak Road Kowloon Hong Kong Confirmed Overseas Key Notified Body Location Activities Location Directive Contract Review Evaluation Review Decision Making Surveillance Control KL 1, ATEX KL 2, KL 3 GAR KL 4, KL 5 RTTE Assessment Manager: JJ Page 37 of 37