Page 1 of 13 Second Revision No. 1-NFPA 326-2014 [ Section No. 2.3.1 ] 2.3.1 ACGIH Publications. American Conference of Governmental Industrial Hygienists, 1330 Kemper Meadow Drive, Cincinnati, OH 45240-1634. ACGIH, Threshold Limit Values for Chemical Substances and Physical Agents and Biological Exposure Indices, 2008 2013 edition. Submittal Date: Thu Apr 10 11:53:43 EDT 2014 Updated referenced publication to its current edition at the time of the revision of the Standard.
Page 2 of 13 Second Revision No. 2-NFPA 326-2014 [ Section No. 2.3.2 ] 2.3.2 ANSI Publication. American National Standards Institute, Inc., 25 West 43rd Street, 4th floor, New York, NY 10036. ANSI Z117.1, American National Standard Safety Requirements for Confined Spaces, 2003 2009 edition. Submittal Date: Thu Apr 10 11:57:04 EDT 2014 Updated referenced publication to its current title and edition at the time of the revision of the Standard.
Page 3 of 13 Second Revision No. 3-NFPA 326-2014 [ Section No. 2.3.3 ] 2.3.3 API Publications. American Petroleum Institute, 1220 L Street, NW, Washington, DC 20005-4070. API Standard 2015, Requirements for Safe Entry and Cleaning of Petroleum Storage Tanks, 6th edition, 2001. API Recommended Practice 2016, Guidelines and Procedures for Entering and Cleaning Petroleum Storage Tanks, 1st edition, 2001 (Reaffirmed May 2006). API Standard 2217A, Guidelines for Safe Work in Inert Confined Spaces in the Petroleum and Petrochemical Industries, 3rd 4th edition, 2005 2009. Submittal Date: Thu Apr 10 11:58:33 EDT 2014 Updated referenced publication to its current edition at the time of the revision of the Standard.
Page 4 of 13 Second Revision No. 4-NFPA 326-2014 [ Section No. 2.3.4 ] 2.3.4 ASTM Publications. ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. ASTM D 5 D 5/D5M, Standard Test Method for Penetration of Bituminous Materials, 2006 2013 edition. ASTM D 323, Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method), 2008 edition. ASTM D 4359, Standard Test Method for Determining Whether a Material is a Liquid or a Solid, 2006 2012. Submittal Date: Thu Apr 10 12:00:41 EDT 2014 Updated referenced publication ASTM D5/D5M to its current document number and updated edition dates of publications at the time of the revision of the Standard.
Page 5 of 13 Second Revision No. 5-NFPA 326-2014 [ Section No. 2.3.5 ] 2.3.5 U.S. Government Publications. U.S. Government Printing Office, Washington, DC 20402. NIOSH Criteria for a Recommended Standard for Working in Confined Spaces, 1979. NIOSH Pocket Guide to Chemical Hazards, June, 2007 edition. Submittal Date: Thu Apr 10 12:04:27 EDT 2014 Updated edition date information of the NIOSH Pocket Guide at the time of the revision of the Standard.
Page 6 of 13 Second Revision No. 10-NFPA 326-2014 [ Section No. 2.4 ] 2.4 References for Extracts in Mandatory Sections. NFPA 30, Flammable and Combustible Liquids Code, 2012 2015 edition. NFPA 77, Recommended Practice on Static Electricity, 2014 edition. NFPA 329, Recommended Practice for Handling Releases of Flammable and Combustible Liquids and Gases,2015 edition. NFPA 921, Guide for Fire and Explosion Investigations, 2014 edition. NFPA 1451, Standard for a Fire Service Vehicle Operations Training Program, 2013 edition. API Standard 2015, Requirements for Safe Entry and Cleaning of Petroleum Storage Tanks, 6th edition, 2001. Submitter Full Name: Lawrence Russell Organization: National Fire Protection Assoc Submittal Date: Thu May 01 22:21:00 EDT 2014 : Only NFPA references are listed in this section.
Page 7 of 13 Second Revision No. 6-NFPA 326-2014 [ Section No. 3.3.16 ] 3.3.16 Liquid. Any material that (1) has a fluidity greater than that of 300 penetration asphalt when tested in accordance with ASTM D 5 D 5/D5M, Standard Test Method for Penetration of Bituminous Materials, or (2) is a viscous substance for which a specific melting point cannot be determined, but that is determined to be a liquid in accordance with ASTM D 4359, Standard Test Method for Determining Whether a Material is a Liquid or a Solid. [30,2012 2015 ] Submittal Date: Thu Apr 10 12:08:50 EDT 2014 Updated referenced publication ASTM D5/D5M to its current document number at the time of the revision of the Standard.
Page 8 of 13 Second Revision No. 12-NFPA 326-2014 [ Section No. A.6.4.2.1 ] A.6.4.2.1 Many hazardous substances stored in tanks and containers or used in cleaning or repairing them can have adverse effects on human health. An example of an applicable regulation is OSHA 29 CFR 1910.1000, Subpart Z, Air Contaminants. Safety Data Sheets (SDS) were formerly referred to as Material Safety Data Sheets (MSDS). Information about Safety Data Sheets can be found in 29 CFR 1910.1200 (g). Submitter Full Name: Lawrence Russell Organization: National Fire Protection Assoc Submittal Date: Fri May 02 15:09:30 EDT 2014 Direction about where to find OSHA's information regarding Safety Data Sheets is added to this guidance note.
Page 9 of 13 Second Revision No. 11-NFPA 326-2014 [ Section No. B.1.1 ] B.1.1 NFPA Publications. National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02169-7471. NFPA 30, Flammable and Combustible Liquids Code, 2015 edition. NFPA 51B, Standard for Fire Prevention During Welding, Cutting, and Other Hot Work, 2014 edition. NFPA 69, Standard on Explosion Prevention Systems, 2008 2014 edition. NFPA 77, Recommended Practice on Static Electricity, 2014 edition. NFPA 306, Standard for the Control of Gas Hazards on Vessels, 2014 edition. Submitter Full Name: Lawrence Russell Organization: National Fire Protection Assoc Submittal Date: Thu May 01 23:59:49 EDT 2014 Added reference for NFPA 30 and updated NFPA 69 reference to the current edition.
Page 10 of 13 Second Revision No. 7-NFPA 326-2014 [ Section No. B.1.2.2 ] B.1.2.2 ANSI Publications. American National Standards Institute, Inc., 25 West 43rd Street, 4th floor, New York, NY 10036. ANSI Z117.1, American National Standard Safety Requirements for Confined Spaces, 2003 2009 edition. Submittal Date: Thu Apr 10 12:11:02 EDT 2014 Updated referenced publication to its current title and edition date at the time of the revision of the Standard.
Page 11 of 13 Second Revision No. 8-NFPA 326-2014 [ Section No. B.1.2.3 ] B.1.2.3 API Publications. American Petroleum Institute, 1220 L Street, NW, Washington, DC 20005-4070. API 653, Tank Inspection, Repair, Alteration, and Reconstruction, 3rd 4th edition, 2001 2009. API 1604, Closure and Periodic Inspection of Underground Petroleum Storage Tanks, 3rd edition, 1996. API 1631, Interior Lining and Periodic Inspection of Underground Storage Tanks, 5th edition, 2001. API 2003, Protection Against Ignitions Arising Out of Static, Lightning, and Stray Currents, 6th 7th edition, 1998 2008. API 2009, Safe Welding, Cutting, and Hot Work Practices in the Petroleum and Petrochemical Industries, 7th edition, 2002. API 2015, Requirements for Safe Entry and Cleaning of Petroleum Storage Tanks, 6th edition, 2001. API 2016, Guidelines and Procedures for Entering and Cleaning Petroleum Storage Tanks, 1st edition, 2001. API 2027, Ignition Hazards Involved in Abrasive Blasting of Atmospheric Storage Tanks in Hydrocarbon Service, 3rd edition, 2002. API 2201, Procedures for Welding or Hot Tapping on Equipment in Service, 5th edition, 2003. API 2207, Preparing Tank Bottoms for Hot Work, 5th 6th edition, 1998 2007. API 2217A, Guidelines for Safe Work in Inert Confined Spaces in the Petroleum Industry and Petrochemical Industries, 2nd 4th edition, 1997 2009. API 2219, Safe Operation of Vacuum Trucks in Petroleum Service,1999 3rd edition, 2005. Submittal Date: Thu Apr 10 12:12:29 EDT 2014
Page 12 of 13 Updated referenced publications to their current edition at the time of the revision of the Standard.
Page 13 of 13 Second Revision No. 9-NFPA 326-2014 [ Section No. B.1.2.4 ] B.1.2.4 STI Publications. Steel Tank Institute, 944 Donata Court, Lake Zurich, IL 60047. STI SP001, Standard for the Inspection of Aboveground Storage Tanks, 4th 5th edition, 2006 2011. STI SP031, Standard for Repair of Shop-Fabricated Aboveground Tanks for Storage of Flammable and Combustible Liquids, 5th edition, 2011. Submittal Date: Thu Apr 10 12:15:53 EDT 2014 Updated referenced publications to their current edition at the time of the revision of the Standard.