Λευκωσία, 12 Μαρτίου ΠΡΟΣ: Όλα τα Μέλη. Κυρία/ε,

Λευκωσία, 12 Μαρτίου 2018 ΠΡΟΣ: Όλα τα Μέλη Κυρία/ε, Σας επισυνάπτoυμε γνωστοποιήσεις από Εθνικούς Οργανισμούς Τυποποίησης, μελών των Ευρωπαϊκών Οργανισμών Τυποποίησης CEN/CENELEC, που περιέχουν τους τίτλους προτεινόμενων εθνικών προτύπων. Σύμφωνα με την Ευρωπαϊκή Οδηγία που αφορά την πληροφόρηση σε θέματα τεχνικών προτύπων, μπορείτε, αφού μελετήσετε τους τίτλους: α) να ζητήσετε όπως λάβετε ηλεκτρονικά ολόκληρο το κείμενο του προσχεδίου εθνικού προτύπου, εάν αυτό είναι διαθέσιμο, β) να συμμετάσχετε στις συναντήσεις της τεχνικής επιτροπής του Εθνικού Οργανισμού Τυποποίησης που ετοιμάζει το προσχέδιο προτύπου και γ) να υποβάλετε εισήγηση στον CYS, να αρχίσει τυποποιητική εργασία σε Ευρωπαϊκό επίπεδο σχετικά με το θέμα της γνωστοποίησης, εάν φυσικά πιστεύετε ότι το εν λόγω εθνικό πρότυπο θα επηρεάσει την ελεύθερη διακίνηση προϊόντων ή την κυπριακή βιομηχανία και οικονομία. Τυχόν σχόλια και παρατηρήσεις παρακαλώ όπως υποβάλλονται στον Κυπριακό Οργανισμό Τυποποίησης. Σε περίπτωση που δε λάβουμε καμία ανταπόκριση, ο CYS δε θα φέρει ένσταση στην προώθηση των υπό αναφορά εθνικών προτύπων. Για περισσότερες πληροφορίες μπορείτε να επικοινωνείτε με την κα. Μαριλένα Νικολάου, Λειτουργό Διοίκησης και Διεθνών Σχέσεων του Κυπριακού Οργανισμού Τυποποίησης (CYS), τηλ: 22 411439, Φαξ. 22 411511 και στην ηλεκτρονική διεύθυνση: m.nicolaou@cys.org.cy Με εκτίμηση, Ανδρέας Ανδρέου, Διευθυντής Βιομηχανίας, για Γενικό Γραμματέα. /ΜΚ. Γρίβα Διγενή 38 & Δεληγιώργη 3, 1066, Τ.Θ. 21455, 1509 Λευκωσία, Κύπρος, Τηλ. + 357-22889860, Φαξ. + 357-22665685, E-mail: meropi@ccci.org.cy, Ιστοσελίδα:www.ccci.org.cy

Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from 2018-02-01 to 2018-02-28 Register issued on : 2018-03-07 A list of subsectors can be found at the end of this document.

Information procedure Page 2 Monthly Notifications Register Notifications registered at CCMC from 2018-02-01 to 2018-02-28 Sector A : SERVICES Register issued on : 2018-03-07

Subsector A01: TOURIST SERVICES Page 3 Subsector : A01 Registration Date : 2018-02-19 IPQ Draft Issue Date : 2018-02-15 Portugal Latest Date for Comments : 2018-03-16 ID : C1441801/0001 Draft for public enquiry 03.080, 03.200 prnp 4523 Accessible Tourism. Hotels, apartment hotels and inns The present Standard is intended to promote good service in hotels, aims to set a benchmark of quality in service and inclusive accessibility. The requirements of this standard are applicable to all accommodation establishments regardless of their type and size. Focus on the following services provided by the establishment: lodging, food and related procedures for the reception and care, as well as the pools and meeting rooms. The present Standard is intended to promote good service in hotels, aims to set a benchmark of quality inserviceandinclusiveaccessibility. The requirements of this standard are applicable to all accommodation establishments regardlessoftheirtypeandsize. Focus on the following services provided by the establishment: lodging, food and related proceduresforthereceptionandcare,aswellasthepoolsandmeetingrooms. Subsector A11: SAFETY AND SECURITY Subsector : A11 Registration Date : 2018-02-14 TSE Turkey ID : t0122173/0001 03.080.10 Work places Rules for turkish and foreign language teaching centers This standard includes rules for structural characteristics, operating, personal and technical equipment of turkish and foreign language teaching centers Subsector : A11 Registration Date : 2018-02-02 TSE Turkey ID : t3012047/0001 03.080.30 Competent services - Rules for motor vehicles This standard includes, rules for management, working conditions, personnel, technical equipment, gruping and structural properties of competent services around the rules mentioned in the contract with the main firm of motor vehicles (land) periodic control, diagnosis, motor, shift box, transfer organs, suspention system, electric and electronic

Page 4 sistems, asistant systems (accessory), additional systems (changes), trunk (body, paint) services before and after sale Subsector A99: UNDETERMINED Subsector : A99 Registration Date : 2018-02-28 UNI Italy ID : 01604213/0001 03.040 UNI1604213 Non-regulated professions - Social project manager - Knowledge, skill and competence requirements This standard specifies the requirements concerning the professional activity of the Social project manager, or rather of the professional who is involved in the conception, planning, drafting, management, control and monitoring, evaluation and reporting of social and welfareprojects. These requirements are specified, starting from specific identified tasks and acitivities, in terms of knowledge, skills and competence, in accordance with the European Qualifications Framework, EQF and they are stated in order to facilitate learning output evaluation and validationprocesses. ** End of Sector **

Information procedure Page 5 Monthly Notifications Register Notifications registered at CCMC from 2018-02-01 to 2018-02-28 Sector B : BUILDING AND CONSTRUCTION Register issued on : 2018-03-07

Subsector B01: FIRE PROTECTION Page 6 Subsector : B01 Registration Date : 2018-02-23 BSI Draft Issue Date : 2018-02-12 United Kingdom Latest Date for Comments : 2018-05-06 ID : 01603832/0001 Draft for public enquiry BS 7974 BS7974.Applicationoffiresafetyengineeringprinciplestothedesignof buildings.codeofpractice.part0:guidetodesignframeworkandfiresafety engineering procedures Subsector : B01 Registration Date : 2018-02-23 BSI United Kingdom ID : 01800228/0001 BS 7273-6 Codeofpracticefortheoperationoffireprotectionmeasures.Part6: Interfacebetweenfiredetectionandalarmsystemswithancillarysystemsand equipment Subsector : B01 Registration Date : 2018-02-23 BSI United Kingdom ID : 01800516/0001 BS 5839-1:2017 Firedetectionandfirealarmsystemsforbuildings.Codeofpracticefor design, installation, commissioning and maintenanceof systems in non-domestic premises. Corrigendum Subsector : B01 Registration Date : 2018-02-16 DIN Germany ID : 03101171/0001 03101171 Statements for fire statistics

Page 7 Subsector : B01 (Secondary Subsector) Registration Date : 2018-02-09 NBN Belgium ID : BE664055/0001 13.220.01 prnbn S 21-204-2:2018 Fire protection in buildings - School buildings - Part 2: Fire protection in new school buildings REV/AMD NBN S 21-204:1982 Subsector B02: STRUCTURES Subsector : B02 Registration Date : 2018-02-26 AFNOR France ID : 00207167/0001 PR NF DTU 13.11 P2 work - Superficial foundations - Part 2 : Contract bill of special administrative model clauses Building Subsector : B02 Registration Date : 2018-02-26 AFNOR France ID : 00207168/0001 PR NF DTU 13.11 P1-2 works - Superficial foundations - Part 1-2 : General criteria for selection of materialsbuilding Subsector : B02 Registration Date : 2018-02-26 AFNOR France ID : 00207169/0001 PR NF DTU 13.11 P1-1

Building works - Superficial foundations - Part 1-1 : Contract bill of technical model clausesbuilding Page 8 Subsector : B02 Registration Date : 2018-02-23 BSI United Kingdom ID : 01800164/0001 BS 851188-1 Flood Protection products - Specification. Part 1 Subsector : B02 Registration Date : 2018-02-23 BSI United Kingdom ID : 01800165/0001 BS 851188-2 Flood Protection products - Specification. Part 2 Subsector B03: CONCRETE Subsector : B03 Registration Date : 2018-02-26 AFNOR France ID : 00207070/0001 PR NF P98-052 Prefabricated concrete products - Prefabricated concrete window sills Subsector : B03 Registration Date : 2018-02-14 TSE Turkey ID : tst01247/0002 91.100.30

Concrete mixing,casting and maintenance rules (under normal weather conditions) This standard comprises casting and curing rules to achive concrete having designated workability, strength and durability under normal weather conditions. Page 9 European : Modified DIN 1045-2:2008 Subsector : B03 Registration Date : 2018-02-14 TSE Turkey ID : tst01247/0002 91.100.30 Concrete mixing,casting and maintenance rules (under normal weather conditions) This standard comprises casting and curing rules to achive concrete having designated workability, strength and durability under normal weather conditions. European : Modified DIN 1045-3:2012 Subsector B04: CEMENT Subsector : B04 Registration Date : 2018-02-19 UNE Spain Latest Date for Comments : 2018-03-31 ID : P0048340/0001 Draft for public enquiry PNE 80402 Cement. Delivery conditions. This standard revises the current published standard, which specifies the requirements and delivery conditions of all types of cements specified in the corresponding product standards.. REV/AMD UNE 80402:2008, UNE 80402:2008/1M:2011 Subsector B05: FIRE TESTS Subsector : B05 Registration Date : 2018-02-16 DIN Germany ID : 00517834/0001 13.220.50 DIN 4102-7 Fire behaviour of building materials and building components - Part 7: Roofing; definitions, requirements and testing

Page 10 Subsector : B05 Registration Date : 2018-02-09 NBN Belgium ID : BE664055/0001 13.220.01 prnbn S 21-204-2:2018 Fire protection in buildings - School buildings - Part 2: Fire protection in new school buildings REV/AMD NBN S 21-204:1982 Subsector B09: THERMAL MATTERS Subsector : B09 Registration Date : 2018-02-22 PKN Poland ID : 21101166/0001 91.120.10 prpn-b-20106 Thermal insulation of building and industrial plant facilities -- Quantity surveying This document specifies the metodology for quantity surveying of thermal insulation of building and industrial plant facilities. Subsector B18: SCAFFOLDING Subsector : B18 Registration Date : 2018-02-14 MSZT Draft Issue Date : 2018-01-22 Hungary Latest Date for Comments : 2018-04-22 ID : 00012312/0001 Published Standard 91.220, 91.220 MSZ 13020 Erection, use and dismantling of requirements for metal scaffolds made of prefabricated components This standard gives regulations to façade scaffold systems for erection, maintenance, cheking and examination, exluded the manufacturing and designing. REV/AMD MSZE 13017:2016; MSZ 13017-1:1983; MSZ 13017-2:1983; MSZ 13017-3:1983; MSZ 13017-4:1983 Subsector : B18 (Secondary Registration Date : 2018-02-14

Page 11 Subsector) MSZT Draft Issue Date : 2018-01-22 Hungary Latest Date for Comments : 2018-04-22 ID : 00012312/0001 Published Standard 91.220, 91.220 MSZ 13020 Erection, use and dismantling of requirements for metal scaffolds made of prefabricated components This standard gives regulations to façade scaffold systems for erection, maintenance, cheking and examination, exluded the manufacturing and designing. REV/AMD MSZE 13017:2016; MSZ 13017-1:1983; MSZ 13017-2:1983; MSZ 13017-3:1983; MSZ 13017-4:1983 Subsector B22: WALLCOVERINGS Subsector : B22 Registration Date : 2018-02-26 AFNOR France ID : 00207254/0001 NF P 05-011 Floors coverings - Classification of locations according to their slip resistance Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT Subsector : B25 Registration Date : 2018-02-28 UNI Italy ID : 01603832/0001 75.060, 75.200, 91.120.25 UNI1603832 Automatic shutdown seismic- induced devices The standard establishes functional requirements, acceptance and testing tests, for seismicinducedautomaticshutdowndevices-dass. The devices in question are used in infrastructure for the transmission and distribution of combustiblegasesofthei,iiandiiifamily,asdefinedbyunien437. Subsector : B25 Registration Date : 2018-02-19 UNE Spain Latest Date for Comments : 2018-03-31

ID : P0047618/0001 Draft for public enquiry PNE 60210 Liquefied natural gas (LNG) satellite terminals. This standard establishes the technical requirements and minimum safety measures that must be implemented during design, construction, tests, installation, utilisation and maintenance of liquefied natural gas (LNG) satellite terminals with a storage geometric capacity up to 1500 m3 and a maximum service pressure of 1 bar. REV/AMD UNE 60210:2015 Page 12 Subsector B26: ROAD BUILDING AND MAINTENANCE Subsector : B26 Registration Date : 2018-02-19 UNE Spain Latest Date for Comments : 2018-03-31 ID : P0049630/0001 Draft for public enquiry PNE 135334 Vertical signing. Retroreflective sheetings with glass beads. Characteristics and test methods. This standard establishes the characteristics of the retroreflective sheetings with glass beads usedinfixedverticalcontroltrafficsignsanditstestmethods. The retroreflective characteristic of these sheetings is caused by a glass microspheres layer into its composition. REV/AMD UNE 135334:2011 Subsector B27: WATERPROOFING MATERIALS Subsector : B27 Registration Date : 2018-02-23 BSI United Kingdom ID : 01800091/0001 BS 6229 Flatroofswithcontinuouslysupportedflexiblewaterproofcoverings.Codeof practice Subsector B33: BUILDING DESIGN

Page 13 Subsector : B33 Registration Date : 2018-02-16 DIN Germany ID : 00517638/0001 01.100.30 DIN 1356-1 Building and civil engineering drawings - Part 1: General rules for representation Subsector B99: UNDETERMINED Subsector : B99 Registration Date : 2018-02-16 DIN Germany ID : 00518233/0001 00518233 Vegetation technology in landscaping - Turf and seeding Subsector : B99 Registration Date : 2018-02-08 NEN Netherlands ID : 50002058/0001 23.040.01, 93.030 NPR 3218-2:2018 Concept nl Sewerage systems outside buildings - Part 2: Guidance on the use phase NPR 3218-2 is applicable on the use of sewerage, on the whhole of appliances for the transport and the discharge of wastewater. It is not applicable to communal purifying. Subsector : B99 Registration Date : 2018-02-08 NEN Netherlands ID : 50002059/0001 23.040.01, 93.030 NPR 3218-3:2018 Concept nl Sewerage systems outside buildings - Part 3: Guidance and maintenance NPR 3218-2 is applicable on the use of sewerage, on the whhole of appliances for the transport and the discharge of wastewater. It is not applicable to communal purifying.

Page 14 ** End of Sector **

Information procedure Page 15 Monthly Notifications Register Notifications registered at CCMC from 2018-02-01 to 2018-02-28 Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS Register issued on : 2018-03-07

Subsector C01: Food products Page 16 Subsector : C01 Registration Date : 2018-02-28 UNI Italy ID : 01604069/0001 03.080.30, 67.020 UNI1604069 Food services - Minimum requirements for the drafting of specifications, tendering notifications and regulations This standard specifies the minimum technical requirements that shall be contained in the tenderingnotificationsandregulationsfortherelianceonfoodservices. This standard does not apply to activities related to food services, concerning design and execution of structural and plant works. REV/AMD UNI 11407:2011 Subsector : C01 Registration Date : 2018-02-28 UNI Italy ID : 01604210/0001 67.200.10 UNI1604210 Animal and vegetable fats and oils - Refined palm kernel oil obtained from the kernel of the fruits of Elaeis guineensis - Characteristics and analytical methods This standard specifies the characteristics and analytical methods of the refined palm kernel oil obtained from the kernel of the fruits of Elaeis guineensis REV/AMD UNI 22041:2001 Subsector : C01 Registration Date : 2018-02-28 UNI Italy ID : 01604211/0001 67.200.10 UNI1604211 Animal and vegetable oils and fats and derived products - Refined Palm oil obtained from the fruits of Elaeis guineensis - Characteristics and analytical methods This standard specifies the characteristics and analytical methods of the refined Palm oil obtained from the fruits of Elaeis guineensis for use in food. REV/AMD UNI 22012:2001 Subsector : C01 Registration Date : 2018-02-28 UNI Italy ID : 01604212/0001

Page 17 67.200.10 UNI1604212 Animal and vegetable oils and fats and derived products Rapeseed refined oil obtained from seeds of Brassica (Brassica napus L., Brassica campestris L., Brassica rapa L., Brassica juncea L. Brassica tournefortii Gouan) with low erucic content (canola oil) - Characteristics and analytical methods This standard establishes the characteristics and methods of analysis of refined rapeseed oil for food use. REV/AMD UNI 22063:1998 Subsector : C01 Registration Date : 2018-02-14 TSE Turkey ID : tst00667/0001 67.120.10 Butchery Lamb-Carcasses This standard specifies the slaughtered lamb carcasses marketed as fresh, chilled and frozen forms. It does not specifies the slaughtered mutton carcasses and other carcasses of slaughtered animals. Subsector : C01 Registration Date : 2018-02-14 TSE Turkey ID : tst02974/0001 67.060 Wheat This standard covers wheat. Covered wheat by document for seed Subsector : C01 Registration Date : 2018-02-14 TSE Turkey ID : tst03200/0001 67.060 Oats This standard specifies the requirements oats species described in 3.1. It does not cover to oats species certified as seed.

Page 18 Subsector : C01 Registration Date : 2018-02-14 TSE Turkey ID : tst03267/0001 67.060 Rye This standard comprise rye. It doesn't comprise the rye mentioned seed in the document. Subsector : C01 Registration Date : 2018-02-14 TSE Turkey ID : tst03415/0001 67.060 Corn This standard comprise corn. It doesn't comprise the corn mentioned seed in the document. Subsector : C01 Registration Date : 2018-02-14 TSE Turkey ID : tst04078/0001 67.060 Barley This standard covers arpay. It does not cover the harp indicated by the document that the seedis. Subsector : C01 Registration Date : 2018-02-14 TSE Turkey ID : tst13138/0001 67.060 Triticale This standard comprise triticale. It doesn't comprise the triticale mentioned seed in the document.

Page 19 Subsector C03: CHEMISTRY Subsector : C03 Registration Date : 2018-02-14 TSE Turkey ID : t1002436/0001 87.060.30 Mineral solvents (white spirit) This standard specifies mineral solvents Subsector C09: SURFACTANTS Subsector : C09 Registration Date : 2018-02-14 TSE Turkey ID : t1013773/0001 71.100.40 Dish washing detergent for industrial use This standard specifies dish washing detergent for industrial use Subsector : C09 Registration Date : 2018-02-14 TSE Turkey ID : tst05155/0002 71.100.40 Laundry detergent - Used in industrial type washing machines This standard specifies laundry detergent used in industrial type washing machines Subsector C13: FERTILIZERS

Page 20 Subsector : C13 Registration Date : 2018-02-16 DIN Germany ID : 05702074/0001 05702074 Peats and peat products for horticulture and landscape gardening - Test methods, properties, specifications Subsector C20: EXPLOSIVES AND FIREWORKS Subsector : C20 Registration Date : 2018-02-08 NEN Netherlands ID : 50002060/0001 13.230, 29.260.20 NPR 7910-1:2018 nl Classification of hazardous areas with respect to explosion hazard - Part 1: Gas explosion hazard, based on NEN-EN-IEC 60079-10-1:2015 This code of practice is a national guideline for the execution of the principles of classification of hazardous areas with respect to explosion hazard, given in NEN-EN-IEC 60079-10-1:2009. Subsector : C20 Registration Date : 2018-02-08 NEN Netherlands ID : 50002061/0001 13.230, 29.260.20 NPR 7910-2:2018 Concept nl Classification of hazardous areas with respect to explosion hazard - Part 2: Dust explosion hazard, based on NEN-EN-IEC 60079-10-2:2015 This code of practice gives guidelines to determine the areas where hazardous areas with respect to explosion hazard can occur and the probability of occuring. Subsector : C20 Registration Date : 2018-02-02 TSE Turkey ID : t0112738/0001 95.020

Page 21 Monitoring of mine action organisations This standard provides guidance on the procedural requirements for the handover of cleared land, and details responsibilities and obligations. Subsector : C20 Registration Date : 2018-02-02 TSE Turkey ID : t0116147/0001 29.060.20, 95.020 Cables of rated voltages up to and including 0,6/1 kv with special fire performance and XLPE insulated, sheathed and armoured power cables This standard applies to cables of rated voltages up to including 0,6/1 kv with special fire performance and XLPE insulated, sheathed and armoured power cables Subsector C21: COSMETICS Subsector : C21 Registration Date : 2018-02-19 UNE Spain Latest Date for Comments : 2018-03-31 ID : P0049497/0001 Draft for public enquiry PNE 84026 Cosmetic raw materials. Preparation of infrared spectra for solid raw materials This standard aims to set the necessary operating conditions to record infrared spectra (IR) of solid raw materials for use in cosmetics REV/AMD UNE 84026:2002 ** End of Sector **

Information procedure Page 22 Monthly Notifications Register Notifications registered at CCMC from 2018-02-01 to 2018-02-28 Sector F : FUNDAMENTAL STANDARDS Register issued on : 2018-03-07

Subsector F14: GRAPHICAL TECHNOLOGY, SIGN-BOARDS AND NAMEPLATES Page 23 Subsector : F14 Registration Date : 2018-02-16 DIN Germany ID : 01700034/0001 01.040.37 DIN 16514 Printing technology - Terminology for letterpress printing Subsector : F14 Registration Date : 2018-02-16 DIN Germany ID : 01700035/0001 01.040.37 DIN 16500-2 Printing technology - General (non process-specific) terminology Subsector : F14 Registration Date : 2018-02-16 DIN Germany ID : 01700036/0001 01.040.37 DIN 16529 Printing technology - Terminology for planorgraphic printing Subsector F15: MATERIAL TESTING IN GENERAL Subsector : F15 Registration Date : 2018-02-16 DIN Germany ID : 06235216/0001 17.040.20 DIN 50990 Measurement of coating thickness - Measurement of the area-related mass of metallic layers by means of spectrometric measurement methods

Subsector F16: GRAPHICAL SYMBOLS Page 24 Subsector : F16 Registration Date : 2018-02-22 ASI Austria ID : 00027354/0001 13.100, 23.040.01 ÖNORM Z 1001 Marking of pipe lines according to their content The present ÖNORM is used for the marking of visible or easily accessible (eg in false ceilings)pipelinesaccordingtotheircontent. Thismarkingisessentialintheinterestofsafety,propermaintenanceandfirefighting. Itshouldalsopointoutthedangerstoavoidaccidents,injuriesorpropertydamages. This ÖNORM does not affect any legislations which provide different requirements for the marking,e.g.ofsubstances,dangers,equipment. The marking of medical gases must comply with ÖNORM EN ISO 7396-1 or ÖNORM EN ISO 5359. Subsector F19: OPTICS Subsector : F19 Registration Date : 2018-02-16 DIN Germany ID : 00518221/0001 00518221 Survey benchmark Subsector : F19 Registration Date : 2018-02-16 DIN Germany ID : 02703128/0001 02703128 Production in optical engineering - Diamond impregnated cup wheels - Part 2: With mounting cylinder Subsector : F19 Registration Date : 2018-02-16 DIN

Germany ID : 02703129/0001 02703129 Production in optical engineering - Diamond impregnated cup wheels - Part 8: With hollow taper shank connection Page 25 Subsector F20: QUALITY ASSURANCE Subsector : F20 Registration Date : 2018-02-09 EVS Estonia ID : 00098346/0001 03.060, 03.080, 91.010.01, 91.010.20, 93.010 prevs 911 Voluntary professional indemnity guidelines for consulting engineering Giving recommendations for the conclusion and the substance of voluntary professional indemnity agreements for consulting with respect to engineering. Subsector : F20 Registration Date : 2018-02-19 IPQ Draft Issue Date : 2018-02-15 Portugal Latest Date for Comments : 2018-03-16 ID : C1521701/0001 Draft for public enquiry 03.100.30 prnp 4427 People management systems. Requirements This Standard specifies requirements for a people management system, covering all hierarchical levels, areas of activity and organic units of an organization, as a vehicle for improvement its effectiveness and efficiency. The requirements of this Standard apply to organizations intending to: - demonstrate their ability to attract, develop and retain the people needed to fulfil their mission; - implement, maintain and continuously improve an organization-wide people management system; - enhance the satisfaction of its employees through the effective application of the system, including procedures to ensure compliance with applicable statutory and regulatory requirements. All requirements of this Standard are generic and are intended to apply to all organizations regardless of type, size and activity developed. The extent of application will depend on factors such as the organization's people management policy, the complexity of its structure, and its activity. Subsector : F20 Registration Date : 2018-02-19

UNE Spain Latest Date for Comments : 2018-03-11 ID : P0049534/0001 Draft for public enquiry PNE 192011-0 Procedure for the regulatory inspection. Pressure equipment. Part 0: General requirements This standard describes the systematic action for the inspections planned under current regulation in order to verify the safety of pressure equipment subject to a pressure exceeding 0.5 bar. REV/AMD UNE 192011-1:2012 Page 26 Subsector : F20 Registration Date : 2018-02-19 UNE Spain Latest Date for Comments : 2018-03-11 ID : P0049535/0001 Draft for public enquiry PNE 192011-4 Procedure for the regulatory inspection. Pressure equipment. Part 4: Specific requirements for cryogenic tanks This standard describes the systematic action for the inspections planned under current regulation in order to verify the safety of cryogenic tanks. REV/AMD UNE 192011-5:2013 Subsector : F20 Registration Date : 2018-02-19 UNE Spain Latest Date for Comments : 2018-03-11 ID : P0049536/0001 Draft for public enquiry PNE 192011-5 Procedure for the regulatory inspection. Pressure equipment. Part 5: Specific requirements for bottles for self-contained breathing apparatus This standard describes the systematic action for the inspections planned under current regulation in order to verify the safety of bottles of self-contained breathing apparatus. REV/AMD UNE 192011-6:2016 Subsector F99: UNDETERMINED Subsector : F99 Registration Date : 2018-02-16 DIN Germany ID : 15900091/0001

Page 27 15900091 Fundamentals of maintenance ** End of Sector **

Information procedure Page 28 Monthly Notifications Register Notifications registered at CCMC from 2018-02-01 to 2018-02-28 Sector I : MECHANICAL ENGINEERING Register issued on : 2018-03-07

Subsector I05: IRON PIPES Page 29 Subsector : I05 Registration Date : 2018-02-16 DIN Germany ID : 08201392/0001 08201392 Couplings for compressed air - claw coupling, 42 mm internal width, without securing nut - Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring Subsector : I05 Registration Date : 2018-02-16 DIN Germany ID : 08201393/0001 08201393 Couplings for compressed air - claw coupling, 42 mm internal width, with securing nut - coupling with male, female and hose connection ends, joint ring Subsector I09: SMALL TOOLS Subsector : I09 Registration Date : 2018-02-16 DIN Germany ID : 12102735/0001 25.060.10 DIN 9811-2 Press tool sets - Part 2: Directives for mounting Subsector : I09 Registration Date : 2018-02-16 DIN Germany ID : 12102736/0001 25.060.10 DIN 9811-1 Press tool sets - Part 1: Technical specifications

Page 30 Subsector I11: MACHINE TOOLS Subsector : I11 Registration Date : 2018-02-16 DIN Germany ID : 12102794/0001 12102794 Parallel shanks made of steel for cutting tools - Part 2: Connecting dimensions for holder chucks, accessories Subsector I17: MACHINERY IN GENERAL (INCLUDING SAFETY) Subsector : I17 Registration Date : 2018-02-26 AFNOR France ID : 00207029/0001 PR NF U66-053 Equipments for slaughterhouses - Slaughtering pens - Safety and hygiene requirements Subsector I30: AIR DISTRIBUTION Subsector : I30 Registration Date : 2018-02-28 SNV Draft Issue Date : 2018-02-22 Switzerland Latest Date for Comments : 2018-05-31 ID : CH180002/0001 Draft for public enquiry 91.140.30 prsia 382/5 Ventilation of residential buildings REV/AMD SIA 2023:2008 Subsector I31: VALVES Subsector : I31 Registration Date : 2018-02-02

Page 31 TSE Turkey ID : t1013725/0001 23.060 Insulation jackets for valve and assembly armatures This standard covers insulation jackets for valve and assembly armatures. ** End of Sector **

Information procedure Page 32 Monthly Notifications Register Notifications registered at CCMC from 2018-02-01 to 2018-02-28 Sector M : METALLIC MATERIALS Register issued on : 2018-03-07

Subsector M01: STEEL Page 33 Subsector : M01 Registration Date : 2018-02-16 SFS Draft Issue Date : 2018-02-15 Finland Latest Date for Comments : 2018-04-15 ID : 0000E501/0001 Draft for public enquiry REV/AMD SFS 1266 Fabricated hot dip galvanized steel reinforcement units for the reinforcement of concrete. Requirementsforcoatings Subsector : M01 Registration Date : 2018-02-16 SFS Draft Issue Date : 2018-02-15 Finland Latest Date for Comments : 2018-04-15 ID : 0000E502/0001 Draft for public enquiry Reinforcingsteels.WeldablehotrolledribbedsteelbarsA700HW REV/AMD SFS 1216 Subsector M05: WELDING Subsector : M05 Registration Date : 2018-02-21 UNMS Slovakia ID : 05800718/0001 25.160.01, 25.160.10 Welding. Instructions for basic tests of welders Title amplification in English REV/AMD STN 05 0705 Subsector : M05 Registration Date : 2018-02-16 DIN Germany ID : 09201020/0001 25.160.50 DIN 35229 Soft solder alloys - Tin and tin alloys - Analysis by spark optical emission spectrometry (S-OES)

Page 34 Subsector M21: PRECIOUS METALS Subsector : M21 Registration Date : 2018-02-26 AFNOR France ID : 00207172/0001 PR NF A56-101 Antifriction alloy ingots - Characteristics ** End of Sector **

Information procedure Page 35 Monthly Notifications Register Notifications registered at CCMC from 2018-02-01 to 2018-02-28 Sector N : NON-METALLIC MATERIALS Register issued on : 2018-03-07

Subsector N03: PETROLEUM PRODUCTS Page 36 Subsector : N03 Registration Date : 2018-02-16 DIN Germany ID : 06235319/0001 06235319 Bitumen and bituminous binders - BTSV Test Subsector : N03 Registration Date : 2018-02-02 TSE Turkey ID : t0114866/0001 87.040 Coating paste - Elastomeric resin based This standard covers Coating paste - Elastomeric resin based Subsector : N03 Registration Date : 2018-02-14 TSE Turkey ID : t1001539/0001 75.080 Petroleum products - Determination of sulphur - Bomb and lamp method This standard, covers the determination of total sulfur content of petroleum products by bomb, lamp and turbidimetric methods. International : Modified ASTM D1266:2013 Subsector : N03 Registration Date : 2018-02-14 TSE Turkey ID : t1001539/0001 75.080 Petroleum products - Determination of sulphur - Bomb and lamp method This standard, covers the determination of total sulfur content of petroleum products by bomb, lamp and turbidimetric methods.

Page 37 International : Modified ASTM D129:2013 Subsector N05: TEXTILES Subsector : N05 Registration Date : 2018-02-02 TSE Turkey ID : t1002793/0001 59.080.30 Textiles - Woollen woven fabrics - For use in outerwear This standard specifies the description, classification and characteristics, sampling, inspection and marketing of woollen woven fabrics for use in outerwear. Subsector N07: SAWN TIMBER Subsector : N07 Registration Date : 2018-02-26 AFNOR France ID : 00206940/0001 PR NF B54-500 Wood - Tool handles - Qualitative classification Subsector N11: WOOD-BASED PANELS Subsector : N11 Registration Date : 2018-02-23 BSI United Kingdom ID : 01800068/0001 BS 1088 Marine plywood. Requirements Subsector N14: PLASTICS PIPES

Subsector : N14 Registration Date : 2018-02-19 UNE Spain Latest Date for Comments : 2018-03-21 ID : P0049632/0001 Draft for public enquiry PNE 53367-1:2014/1M Plastics. Plastics piping systems for water supply for irrigation. Part 1: Specifications for polyethylene pipes This part of the standard specifies characteristics and test methods for polyethylene (PE) pipes for irrigation. REV/AMD UNE 53367-1:2014 Page 38 ** End of Sector **

Information procedure Page 39 Monthly Notifications Register Notifications registered at CCMC from 2018-02-01 to 2018-02-28 Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT Register issued on : 2018-03-07

Subsector S01: ACOUSTICS AND SOUND INSULATION Page 40 Subsector : S01 Registration Date : 2018-02-16 DIN Germany ID : 00101044/0001 00101044 Acoustical design for lifts Subsector S07: ANAESTHETIC AND RESPIRATORY EQUIPMENT Subsector : S07 Registration Date : 2018-02-23 BSI United Kingdom ID : 01800002/0001 BS 4272-4 Anaestheticandanalgesicmachines.Part4:Specificationforauxiliarygas outlets and probes Subsector S08: AIR QUALITY Subsector : S08 Registration Date : 2018-02-14 TSE Turkey ID : t0122167/0001 13.040.35 Microbial gel air filter This standard covers microbial gel air filter Subsector S09: WATER QUALITY AND WATER SUPPLY Subsector : S09 Registration Date : 2018-02-16 DIN Germany ID : 11904263/0001

11904263 Characterization of solids - Quality assurance and Quality control - Re-transferability of measurement results to the characteristic distribution in the population Page 41 Subsector S16: AIDS FOR THE DISABLED Subsector : S16 Registration Date : 2018-02-19 UNE Spain Latest Date for Comments : 2018-03-31 ID : P0047073/0001 Draft for public enquiry PNE 153101 EX Easy to read. Guidelines and recommendations for the elaboration of documents This report specifies technical recommendations for the production, editing and validation ofdocumentsineasilyreadtakingintoaccountthecriteriaofdesignforall. This report applies to the writings texts and documents, regardless of the format in which they are. Subsector S19: FIRST AID EQUIPMENT AND RESCUE SYSTEMS Subsector : S19 Registration Date : 2018-02-21 HZN Croatia ID : 00580003/0001 11.160 rphrn1112 First aid kit Subsector : S19 Registration Date : 2018-02-16 DIN Germany ID : 06301886/0001 06301886 First aid material - Case for first aid material; Amendment A1

Page 42 Subsector S24: SOIL QUALITY Subsector : S24 Registration Date : 2018-02-22 PKN Poland ID : 19201133/0001 13.080.01 prpn-z-19012 Soil quality -- Determination of particle size distribution in mineral soil material -- Laser diffraction method This standard specifies a method of determining the particle size distribution of earth particles (< 2 mm) in mineral soil material by laser diffraction under laboratory conditions. This standard is not applicable to soils containing crumbs of calcium carbonate, because they dissolve in water causing instability in time of obtained results. Subsector : S24 Registration Date : 2018-02-08 NEN Netherlands ID : 50002062/0001 13.080.10 NEN 6950:2018 Concept nl Soil - Umbrella standard for determination of selected elements in soil, sediment and sludges In this umbrellastandard matrix indications for the determination of selected elements in soil are described. The application of the specific standards for which elements and in which situations is specified. Subsector : S24 Registration Date : 2018-02-08 NEN Netherlands ID : 50002063/0001 13.080.10 NEN 5739:2018 Concept nl Soil - Determination of free iron by atomic absorption spectrometry This standard describes a method for the determination of free iron in soil samples. Free iron is iron not compounded with a silicates matrix. It concerns amorphous as well as crystalline iron compounds. The standard is applicable to soil samples pretreated according to NEN 5751. This standard is developed to meet the requirements of NEN 5753 and NEN 5754.

Page 43 Subsector S99: UNDETERMINED Subsector : S99 Registration Date : 2018-02-28 UNI Italy ID : 01604260/0001 13.100 UNI1604260 Adoption and effective implementation of the Organizations and Management Models (MOG) of health and safety - Asseveration procedure in the construction and civil engineering sector Legislative Decree 81/2008 and subsequent amendments has the power to release the affidavit on the adoption and effective implementation of the organization and management models of health and safety as declined in art. 30 of same legislative decree, and having the aim of preventing the crimes referred to the art. 25 septies of Legislative Decree 231/01 and subsequentamendments. This opportunity is up to the Joint Bodies constituted of associations of employers and workersbetweenthemostrepresentativesatnationallevel. However, the law does not give a resolution about the kind of requirements or procedures for the implementation of the affidavit activity, except for the one, provided for in paragraph 3b of art. 51 of the Decree 81, according to which "for the purposes referred to paragraph 3- bis, the joint bodies establish specific joint commissions, technically competent". Therefore, National Commission for Accident Prevention, Hygiene and the Working Environment (CNCPT) has promoted in UNI the declination of a standard affidavit path all over the national territory for construction companies through the drafting and publication ofuni/pdr2:2013referencepractice. Furthermore, within the UNI framework, a technical report is being approved that regularly declaims the methods of affidavit of MOGs by Joint Bodies (UNI1601968 ) aimed at makingtheprocessuniformforalltheproductionsectors. As the practice is near to its expiring date, the publication of a dedicated sectorial standard has been decided as the result of a public consultation inside standardization body. The standard will join a more complete framework including the new RT relative to project n. UNI1601968 almost completed. Subsector : S99 Registration Date : 2018-02-13 SIS Draft Issue Date : 2018-02-13 Sweden Latest Date for Comments : 2018-04-13 ID : 08760119/0001 11.140 8760119 Health care textiles - Trouser for staff with leg cuff This standard includes requirements and design description for trouser for staff with leg cuff, intended as a work piece for healthcare professionals. The garment is designed to suit both women and men.

Page 44 ** End of Sector **

Information procedure Page 45 Monthly Notifications Register Notifications registered at CCMC from 2018-02-01 to 2018-02-28 Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING Register issued on : 2018-03-07

Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES Page 46 Subsector : T01 Registration Date : 2018-02-16 DIN Germany ID : 13202651/0001 47.020.30 DIN 86004-2 Ships and marine technology - Corrosion preventing construction activities and commissioning of pipelines - Part 2: Piping systems made of iron based alloys Subsector : T01 Registration Date : 2018-02-16 DIN Germany ID : 13202988/0001 13202988 Ships and marine technology - Graphical symbols for technical documentation - Part 4: Sounding pipes, air pipes and filling pipes; Text in German and English Subsector T02: AEROSPACE Subsector : T02 Registration Date : 2018-02-23 BSI United Kingdom ID : 01800456/0001 BS XXXX Qualification and approval of UAS operatives Subsector T03: ROAD VEHICLES Subsector : T03 Registration Date : 2018-02-16 DIN Germany ID : 05202783/0001 05202783 Road vehicles - Air filters for passenger compartments - Part 2: Test for gaseous filtration

Page 47 Subsector : T03 Registration Date : 2018-02-16 DIN Germany ID : 05202784/0001 05202784 Road vehicles - Air filters for passenger compartments - Part 3: PMx based filter efficiency eff (PMx) Subsector : T03 Registration Date : 2018-02-16 DIN Germany ID : 05202785/0001 05202785 Road vehicles - Funeral vehicles - Requirements on load securing Subsector : T03 Registration Date : 2018-02-16 DIN Germany ID : 05202788/0001 05202788 Road vehicles - Data parameter specification for body application units in commercial vehicles Subsector : T03 Registration Date : 2018-02-02 TSE Turkey ID : t2000932/0001 43.060.20 Air filter elements for internal combustion engines and compressors This standard, specifies the air filter elements used for cleaning inlet air of the internal combustion engines and compressors for otomotive industries and industrial applications.

Page 48 European : Modified DIN 73353:1977 Subsector T14: PACKAGING Subsector : T14 Registration Date : 2018-02-26 AFNOR France ID : 00206938/0001 PR NF H34-012 XXXXXX Subsector T19: ROAD SAFETY Subsector : T19 Registration Date : 2018-02-19 UNE Spain Latest Date for Comments : 2018-03-31 ID : P0049631/0001 Draft for public enquiry PNE 135352 Vertical signs and road delineators. "In situ" quality control. Characteristics and test methods. This standard includes the description of the controls to be carried out "in situ" on the elements of vertical signs and road delineators in service, to check their conservation status and visibility, as well as the test methodology that allows evaluating their characteristics. This standard is applicable to signs, panels, milestones, beacons and road studs in service. It is also applicable to studs and anchoring elements. REV/AMD UNE 135352:2006 ** End of Sector **

Information procedure Page 49 Monthly Notifications Register Notifications registered at CCMC from 2018-02-01 to 2018-02-28 Sector Z : INFORMATION TECHNOLOGY Register issued on : 2018-03-07

Subsector Z99: UNDETERMINED Page 50 Subsector : Z99 Registration Date : 2018-02-28 UNI Italy ID : 01604186/0001 35.240.80 UNI1604186 Health Informatics - Extension of EN ISO 13940 standard to social concepts. The main aim of the technical report is to develop a conceptual model that extends the health concepts reported in the EN ISO 13940 System of concepts to support continuity of care standard with those related to the social context. This model will represent the basis to define a standard, which facilitate the management of care pathways of an individual with the aim of making the information systems semantically interoperable considering both health, and social organizations that are involved in the provision of health and social integrated services. Subsector : Z99 Registration Date : 2018-02-28 UNI Italy ID : 01604188/0001 35.240.80 UNI1604188 Health Informatics - Architectural models for the development of integrated software applications for healthcare. This technical report wants to provide a guide to support Public Administration and software application providers in the healthcare sector, in order to promote the development of ecosystem-based software systems, consisting of models, services and platforms compliant tothemaininternationalhealthinformaticsstandards. The main objective is to address stakeholders in adopting a holistic and integrated paradigm of health, in contrast to the current one, based on monolithic, isolated and dedicated systems. The resulting documentation will allow users to have greater awareness of syntactic and semantic interoperability models, formalization of knowledge, management and control of health processes, analysis of large amount of data and personal data protection mechanisms. ** End of Sector **

List of non-electrotechnical subsectors 2011-06 Sector A: Services Subsector Title ISO/TC CEN/TC reference reference A01 Tourist services / 329; CEN/WS ETO A02 Cleaning services / 328 A03 Postal services / 331 A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM A05 Maintenance services / 319 A06 Building and construction services / 330 A07 Translation services / A08 Funeral services / CEN/BT/TF 139 A09 Facility management / 348 A10 Services of Real Estate Agents / CEN/BT/TF 180; 373 A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4 A12 Consultancy Services / 395; 381 A13 Expertise Services / 405 A14 Aesthetic Services / 403;409 A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction Subsector Title ISO/TC CEN/TC reference reference B01 Fire protection 21 70; 72; 191; 192 B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340 B03 Concrete 71 104; CEN/WS 009 B04 Cement 74; 77 51 B05 Fire tests 92 127 B06 Gypsum / 241 B07 Glass 160 129 B08 Doors and windows 162 33 B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036 B10 Timber structures 165 124 B11 Metal structures 167 135 B12 Masonry 179; 196 125; 246 B13 Solar energy 180 312 B14 Geotechnics 182 341; 396 B15 Sanitary appliances / 163; 7 B16 Taps / / B17 Lighting equipment and lighting / 50; 169 application technology B18 Scaffolding / 53 B19 Ceramic tiles 189 67 B20 Drainage equipment / 165 B21 Baths / / B22 Wallcoverings / 99 B23 District heating / 107 B24 Auxiliary and handicraft work / / B25 Gas distribution installation and / 234; 235; 282 related equipment B26 Road building and maintenance / 178; 227 B27 Waterproofing materials / 128; 254; 361; 314 B28 Floor coverings 38/SC 12 134 B29 Aggregates / 154 B30 Floor and surfacing / 217; 303; 323; 390 B31 Heating systems in buildings / 228; 247 B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388 B34 Building and construction Environmental aspect 350; 351 B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products Subsector Title ISO/TC CEN/TC reference reference C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054 C02 Paints and related products 35 139; 298; 173 C03 Chemistry 47 317; 363 C04 Laboratory glassware 48 332 C05 Lac / / C06 Essential oils 54 / C08 Pesticides 81 / C09 Surfactants 91 276 C10 Starch 93 / C11 Tobacco 126 401 C12 Glass plant / / C13 Fertilizers 134 223; 260 C16 Wood preservatives / / C17 Trees and plants / / C18 Adhesives / 193 C19 Chemical analysis 201; 202 382; 347 C20 Explosives and firework / 212; 321 C21 Cosmetics 217 392 C22 Bio-Based products / 411 C99 Undetermined / 386

Sector F: Fundamental standards Subsector Title ISO/TC CEN/TC reference reference F01 Technical drawings 10 / F02 Units & symbols 12 / F03 Preferred numbers 19 / F04 Sieves 24 / F05 Measuring instruments 30; 113 92; 171; 176; 237; F06 Terminology principles 37 / 294; 318; 244; 367; 141; CEN/WS 011 F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368 F08 Surfaces / 290 F09 Banking 68 / F10 Statistics 69 / F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365 F13 Environmental tests / / F14 Graphical technology, 130 / sign-boards and nameplates F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033 F16 Graphical symbols 145 / F17 Administrative documents 154 CEN/WS MMU F18 Micrographics 171 / F19 Optics 172; 187 123; 170 F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362 F21 Value analysis and project / 279 network F22 Logistics / 379; 273 F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027 F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use Subsector Title ISO/TC CEN/TC reference reference H01 Cinematography 36 372 H02 Photography 42 / H03 Consumer questions / 291 H04 Sports equipment 83 136 H05 Oil and gas burners / 47; 131 H06 Horology 114 / H07 Space heating 116 62; 110; 130; 179; 180 H08 Sizing systems 133; 137 / H09 Furniture 136 207 H10 Sewing machines 148 / H11 Heater controls 161 58 H12 Ceramic and glass-ware for food 166 / H13 Jewellery 174 CEN/WS 047 H14 Caravans 177 245 H15 Toys 181 52 H17 Oil stoves / 46 H18 Central heating boilers / 48; 57; 109; 269 H19 Non-electric cookers and barbecues / 49; 281; 295 H22 Smokers lighters and matches / 355; 87 H23 Ladders / 93 H24 Tactile danger warnings / / H25 Large gas appliances / 106; CEN/CLC/JWG FCGA H26 Sealing materials / 108; 208 H27 Educational equipment / / H28 Hunting 191 / H29 Heat pumps / 113 H30 Equipment for children / 252 H31 Dedicated LPG appliances / 181 H32 Culinary utensils 186 194 H33 Footwear (excluding protective / 309 footwear) H34 Child safety / CEN/BT/WG 117 398 H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering Subsector Title ISO/TC CEN/TC reference reference I01 Screw threads 1 / I02 Fasteners 2 185 I03 Limits & fits / / I04 Rolling bearings 4 / I05 Iron pipes 5 203 I06 Pressure vessels 11 54 I07 Shafts 14 / I08 Agricultural machines 23 144, 334 I09 Small tools 29 213 I10 Splines / / I11 Machine tools 39 142; 143; 145; 255 I12 Pulleys & belts 41 188 I13 Gas containers 58 23; 286 I14 Gears 60 / I15 Equipment for petroleum industry 67 12 I16 Internal combustion engines 70; 192 270 I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025 I18 Mining 82 196 I19 Nuclear energy 85 / I20 Refrigeration 86 44; 182 I21 Chains and chain wheels 100 / I22 Vacuum technology 112 / I23 Pumps 115 197 I24 Industrial fans 117 356 I25 Compressors 118 232 I26 Plain bearings 123 / I27 Earth moving and construction 127; 195 151 equipment I28 Fluid power 131 / I29 Gas cleaning / 195 I30 Air distribution / 156 I31 Valves 153; 185 69; 236; 105 I32 Flanges / 74 I33 Information processing in 184 310 automation I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152 I36 Thermoprocessing technology / 186 I37 Printing and paper machines / 198 I38 Leather production, tannery and / 200; 201 related machinery I39 Machines for metal processing / 202; 322 I40 Industrial piping networks / 267 I41 Membrane filters / 272 I42 Potentially explosive atmospheres / 305 I43 Hydrogen energy 197 / I44 Nanotechnologies 229 352 I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials Subsector Title ISO/TC CEN/TC reference reference M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110 M02 Zinc / 209 M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron M04 Copper 26 133 M05 Welding 44 121 M06 Dimensions of wrought products / / M07 Manganese and chromium 65 / M08 Light alloys 79 132 M09 Iron ores 102 / M10 Metallic coatings 107 240 M11 Powder metallurgy 119 / M12 Aluminium ores 129 / M13 Ferroalloys 132 / M14 Nickel 155 / M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101 M17 Heavy metal ores 183 / M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407 M20 Tin and tin alloys / 220 M21 Precious metals / 283 M22 Lead and lead alloys / 306 M99 Undetermined / /

Sector N: Non-metallic materials Subsector Title ISO/TC CEN/TC reference reference N01 Paper and board 6 172 N02 Solid fuels 27 335; 343;383; CEN/WS 019 N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061 N04 Refractories 33 187 N05 Textiles 38 189; 248 N06 Rubber 45 218; 366 CEN/WS 003 N07 Sawn timber 55 38; 175 N08 Mica / / N09 Plastics 61 249 N10 Cork 87 / N11 Wood-based panels 89 112 N12 Timber products 99 / N13 Leather 120 289 N14 Plastics pipes 138 155 N17 Fluorspar 175 / N18 Glass-fibre reinforced plastics / / N19 Tapes / 253 N20 Ceramics 206 184 N21 Gaseous fuels and combustible gas 158; 193 238; 408 N22 Feather and related materials / 222 N23 Diamond / 410 N99 Undetermined / /

Sector S: Health, environment and medical equipment Subsector Title ISO/TC CEN/TC reference reference S01 Acoustics and sound 43 126; 211 insulation S02 Transfusion equipment 76 / S03 Syringes 84 / S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043 S05 Dentistry 106 55 S06 Vibration & shock 108 231 S07 Anaesthetic and respiratory 121 215 equipment S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034 S10 Surgical implants 150 285; CEN/CLC/JWG AIMD S11 Contraceptives 157 / S12 Gas analysis / / S13 Ergonomics 159 122 S14 Prosthetics 168 / S15 Surgical instruments 170 / S16 Aids for the disabled 173 293 S17 Respiratory protective devices / 79 S18 Sterilization of equipment 198 102; 204 S19 First aid equipment and rescue systems / 239 S20 Waste collection, handling and / 183 transportation S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055 S22 Energy saving / CEN/WS 005 CEN/WS 015 S23 Personal & property protection against aggression/burglary protection / 263 S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics S26 Environmental management 207 CEN/TC 406; CEN/WS 040 S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120 S28 Demining / CEN/WS 029 CEN/WS 013 S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging Subsector Title ISO/TC CEN/TC reference reference T01 Shipbuilding and maritime 8; 188 15; 300 structures T02 Aerospace 20 274; AECMA; ECSS ;377 T03 Road vehicles 22 301; 326 CEN/WS IMA T04 Tyres 31 / T05 Pallets 51 / T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393 T07 Glass containers 63 / T08 Cranes 96 147 T09 Materials handling and 101 148; 149 storage equipment T10 Freight containers 104 119; 280 T11 Steel wire ropes 105 / T12 Industrial trucks 110 150; 324 T13 Lifting chains, hooks and ropes 111 168 T14 Packaging 122 261; 120 T15 Cycles 149 333 T16 Lifts & escalators 178 10; 242 T17 Builders hoists / / T18 Elevating platforms / 98 T19 Road safety / 226; 339 T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR T21 Packaging machines / 146 T22 Off-road vehicles / 354 T99 Undetermined / CEN/WS TAF

Sector Z: Information technology Subsector Title ISO/TC CEN/TC Z01 Radiocommunication for IT / / Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI Z03 Common O.S.I. activities / CEN/CLC - EWOS Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS ego; CEN/WS ein; CEN/WS epr

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC February 2018 Issued on : 7 March 2018

Page 1 Information Procedure on Standards Notifications registered at CCMC during February 2018 Sector V : ELECTRONIC ENGINEERING Register issued on : 7 March 2018

Subsector V03: ELECTROACOUSTICS AND ULTRASONICS Page 2 Subsector : V03 Registration Date : 2018-02-16 DIN Germany ID : 00101046/0001 00101046 Sound level meters - Additional requirements for special measuring tasks ** End of Sector **

Page 3 Information Procedure on Standards Notifications registered at CCMC during February 2018 Sector W : ELECTRICAL ENGINEERING Register issued on : 7 March 2018

Subsector W05: POWER TRANSFORMERS Page 4 Subsector : W05 Registration Date : 2018-02-19 UNE Spain Latest Date for Comments : 2018-03-31 Draft for public ID : P0049676/0001 enquiry PNE 21538-1 Three phase dry-type distribution transformers 50 Hz, from 100 kva to 3150 kva, with highest voltage for equipment not exceeding 36 kv. Part 1: General requirements. National complementary annex. The purpose of this document is to establish the electrical and design characteristics that are either not included in the UNE EN 50588-1 Standard or for which various options are establishedthereinandwhicharewidelyusedinspanishelectricaldistributionsystems. In everything that is not mentioned in this standard, what is indicated in Standard UNE-EN 50588-1applies. This document applies to dry-type transformers of rated power from 100 kva to 3150 kva intended for operation in three-phase distribution networks, for indoor continuous service, 50Hz,naturalcooling,withtwowindings: - A primary winding (high voltage) with a higher voltage for the material from 3.6 kv to 36 kv. - A secondary winding (low voltage) with a higher voltage for the material that does not exceed1.1kv For outdoor applications, a special design or an enclosure (envelope with degrees of IP and IKprotectiontothisapplication)shouldbespecified. NOTE 1 This standard can be applied, in whole or in part, to transformers that have windings with more than one rated voltage. In this case, the buyer should specify the assigned power foreachtransformationratio. NOTE 2 For dry-type transformers installed in generating plants, additional requirements not coveredbythisstandard,andalternativerequirementsmaybespecified. NOTE 3 For dry-type transformers used for wind turbine applications, Standard EN60076-16 establishes additional requirements. REV/AMD UNE 21538-1:2013 Subsector W08: ELECTRIC CABLES Subsector : W08 Registration Date : 2018-02-23 BSI United Kingdom ID : 01800067/0001 BS 7629-1:2015 smokeandcorrosivegaseswhenaffectedbyfire.part1:multicorecables. Amendment Subsector W27: ELECTRICAL INSTALLATIONS IN BUILDINGS

Subsector : W27 Registration Date : 2018-02-16 DIN Germany ID : 02227999/0001 02227999 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors (IEC 64/2244/CD:2017) Page 5 Subsector : W27 Registration Date : 2018-02-16 DIN Germany ID : 02228032/0001 02228032 Low-voltage electrical installations - Part 7-709: Requirements for special installations or locations - Harbours, marinas and similar locations - Special requirements for shore supply to ships German implementation HD 60364-7-709:2009/prAA:2017 Subsector : W27 Registration Date : 2018-02-16 DIN Germany ID : 02228048/0001 02228048 Low voltage electrical installations - Part 4-42: Protection for safety - Protection against thermal effects; German implementation HD 60364-4-42:2011/prAB:2017 ** End of Sector **

Page 6 Information Procedure on Standards Notifications registered at CCMC during February 2018 Sector Z : CCMC/CEN/CLC Register issued on : 7 March 2018