HRV / ERV Heat or Energy Recovery Ventilation Systems You need fresh air, so does your home.
Control Your Indoor Air Quality Following the energy crisis of the 1970s, we tended to insulate our homes and make them airtight. The result? Our homes are more economical to heat and cool because heat losses and infiltrations are reduced to a minimum. The consequence? Everything produced inside the home remains inside and accumulates. Resulting in the deterioration of indoor air quality. More and more illnesses are associated with poor indoor air quality. We have only to think of the growing number of asthma and allergy cases. The air we breath is contaminated by all types of gases, dust and bacteria. In addition, we consume oxygen and produce gases and humidity, while not renewing the oxygen consumed. What Should You Know? According to the Environmental Protection Agency (EPA), indoor air is anywhere from 2 to 10 times more hazardous than outdoor air. In fact, the EPA warns that the indoor air quality is the number one environmental health problem. Solvents Household cleaning materials Paint Cosmetics Glue Particles Rugs Linen Furniture Animals Humidity Bathroom Kitchen Basement Heat or Energy Recovery Ventilators (HRV or ERV) Heat or energy recovery has become essential today, given constantly rising costs and public awareness of our non-renewable resources. Heat or energy recovery systems have been designed to recover the heat or energy contained in exhaust air. Thanks to a balanced air-flow exchange system, the heat or energy from contaminated exhaust air passes through the recovery core, and fresh air enters through other cells absorbing that heat or energy without mixing with the exhaust air. So you benefit from healthy fresh air while you save on heating or air conditioning costs. A selection of models and controls are offered to suit your needs. How can you know whether you need a heat or an energy recovery system? If you use a heating system more often than air conditioning, you need an HRV. If the opposite is the case, an ERV is recommended.
How they work & type of installation HRV*: A residential heat recovery ventilator uses separate motors to exhaust stale ambient air and to introduce fresh outdoor air. The technology of a plate heat recovery core is that it transfers warm ambient air from one airstream to the other without mixing the air streams for maximum efficiency and comfort. *Application ideal for cold climates. ERV*: A residential energy recovery ventilator uses separate motors to exhaust stale ambient air and to introduce fresh outdoor air. The technology of a plate energy recovery core is that it transfers latent energy (humidity) & heat from one airstream to the other without mixing the airstreams for maximum efficiency and comfort. *Application ideal for warm humid climates. Best Fresh air Exhaust air Independent system Bathroom Control HRV/ERV Fresh air from outside Exhaust air from home Exhaust air hood Fresh air supply hood Heat or Energy recovery core Exhaust air to outside ISF 6" (152 mm) dia. collar system Fresh air to home Better Exhaust at the source and supply in the return Bathroom Control Forced air system Climate Conditions Extreme Heat Recovery Ventilator Required Moderate Heat Recovery Ventilator Recommended Pacific & Dry Heat Recovery Ventilator Recommended Energy Recovery Ventilator Optional Hot & Humid Energy Recovery Ventilator Recommended Good HRV/ERV Exhaust air hood Fresh air supply hood Exhaust and supply in the return Bathroom Control Forced air system HRV/ERV Exhaust air hood Fresh air supply hood
& Benefits of the Greentek System The entire line of Greentek Heat Recovery Ventilators (HRV) & Energy Recovery Ventilators (ERV) offer features and benefits that are revolutionary. Backed by the best warranty in the market, they are not only reliable & efficient, they allow peace of mind and comfort for years to come. PH 7.15
Balancing Pressure Taps Quick and easy integrated balancing pressure taps located in the access door allows for accurate readings and maximizing your balanced ventilation requirements. SPM attachment system The Greentek HRV/ERV products are designed for installation by a single person. Single Person Mounting will enable you to save time and effort by offering you a variable attachment system. DuoTrol balancing system Silent and economical... By reducing motor speed to balance the unit, you avoid the noise that would be produced by balancing dampers. In addition, with this technology the unit will consume less energy. High Performance Engineered Motors All Greentek products are designed with high-performance and reliable motors for your comfort and peace of mind. Factory sealed and dynamically balanced, our motors are maintenance-free for years to come. ISF Revolutionary Collar System (Patent Pending) Quick and simple to install thanks to our revolutionary Insert Slide and Fix collar system. The ISF collar system enables you to manipulate duct within your reach and then insert by sliding it in place, for a better and quicker installation. The polypropylene HRV Core Designed to maximize airflow and performance. The core is constructed from a composite of polypropylene materials that allows latent heat transfer from one airstream to another while preventing cross-contamination The dpoint ERV Core Advanced Heat and Humidity Exchanger superior to existing paper based cores, dpoint s washable ERV Core is manufactured from a durable polymer membrane. Antimicrobial protection, which inhibits the growth of mold and odor causing bacteria on the membrane.
C3.14 HRV NEW 5 operating modes (ECONO**, INTERMITTENT, CONTINUOUS, RECIRCULATION and HIGH SPEED) Compact design for tight spaces Silent & economical Damper defrost sequence with recirculation Integrated door pressure balancing taps Lifetime limited warranty on the heat recovery core Model Airflow Collar Port Variable Motor Dimensions Adjusted Sensible Recovery Weight HRV Performance System Location Speed Warranty (H x W x D) Efficiency ASRE% @ 0º C (Approx.) C3.14* 30-140 CFM 5" Oval Dia. Top 5 years 23 3 32"x 17 13 32"x 15 51 64" 82 % 45.5 lbs (20.6 Kg) (14 L/s-66 L/s) (125 mm) 58.7 cm x 44.2 cm x 40.1 cm *This product earned the ENERGY STAR by meeting strict energy efficiency guidelines set by Natural Resources Canada and the US EPA. It meets ENERGY STAR requirements only when used in Canada. Solace XPH Series HRV ENERGY STAR rated Heat Recovery Ventilator 4 operating modes (ECONO**, INTERMITTENT, CONTINUOUS and HIGH SPEED) Quick & simple installation Slim compact design Integrated door pressure balancing taps Lifetime limited warranty on the heat recovery core Model Airflow ISF TM Port Variable Motor Dimensions Adjusted Sensible Recovery Weight HRV Performance Collar System Location Speed Warranty (H x W x D) Efficiency ASRE% @ 0º C (Approx.) XPH 1.5 * 30-150 CFM 6" Round Dia. Side 10 years 211 2"x 23 7 8"x 11 3 8" 76 % 49 lbs (22.2 Kg) (14 L/s-71 L/s) (152 mm) 54.6 cm x 60.6 cm x 28.9 cm XPH 2.0 * 50-250 CFM 6" Round Dia. Side 10 years 211 2"x 23 7 8"x 16 1 2" 82 % 59 lbs (26.8 Kg) (24 L/s-118 L/s) (152 mm) 54.6 cm x 60.6 cm x 41.9 cm *This product earned the ENERGY STAR by meeting strict energy efficiency guidelines set by Natural Resources Canada and the US EPA. It meets ENERGY STAR requirements only when used in Canada.
SS 3.80 FSD HRV/ERV 4 operating modes (ECONO**, INTERMITTENT, CONTINUOUS and HIGH SPEED) Designed specific for condos, apartments and small homes Energy efficient & Ultra-quiet Lifetime limited warranty on the heat recovery core 5-year limited warranty on the energy recovery core Model Airflow ISF TM Port Variable Motor Dimensions Adjusted Sensible Recovery Weight HRV/ERV Performance Collar System Location Speed Warranty (H x W x D) Efficiency ASRE% @ 0º C (Approx.) SS 3.80* 30-100 CFM 5" Oval Dia. Top 5 years 18"x 20"x 141 2" 74 % 41 lbs (18.6 Kg) HRV (14 L/s-47 L/s) (127 mm) 45.7 cm x 50.8 cm x 36.8 cm SS 3.80* 30-100 CFM 5" Oval Dia. Top 5 years 18"x 20"x 141 2" 70 % 40 lbs (18.1 Kg) ERV (14 L/s-47 L/s) (127 mm) 45.7 cm x 50.8 cm x 36.8 cm * Available for the US market XDH 7.15 HRV Advanced 5 TH port recirculatin damper design 5 operating modes (ECONO**, INTERMITTENT, CONTINUOUS, RECIRCULATION and HIGH SPEED) Offers flexibility with multiple operating modes Integrated door pressure balancing taps Lifetime limited warranty on the heat recovery core Model Airflow ISF TM Port Variable Motor Dimensions Adjusted Sensible Recovery Weight HRV Performance Collar System Location Speed Warranty (H x W x D) Efficiency ASRE% @ 0º C (Approx.) XDH 7.15* 30-150 CFM 6" Round Dia. Side 10 years 211 2"x 31 3 4"x 11 3 8" 76 % 56 lbs (25 Kg) (14 L/s-71 L/s) (152 mm) 54.6 cm x 80.6 cm x 28.9 cm *This model offers a recirculating mode that enables warm ambient air to be distributed throughout your home. *This product earned the ENERGY STAR by meeting strict energy efficiency guidelines set by Natural Resources Canada and the US EPA. It meets ENERGY STAR requirements only when used in Canada.
PH 7.15 ES & 10.22 ES HRV ENERGY STAR rated Heat Recovery Ventilator 4 operating modes (ECONO**, INTERMITTENT, CONTINUOUS and HIGH SPEED) Quick & simple installation Integrated door pressure balancing taps Slim compact design Lifetime limited warranty on the heat recovery core Model Airflow ISF TM Port Variable Motor Dimensions Adjusted Sensible Recovery Weight HRV Performance Collar System Location Speed Warranty (H x W x D) Efficiency ASRE% @ 0º C (Approx.) PH 7.15 ES* 30-150 CFM 6" Round Dia. Side 10 years 211 2"x 23 7 8"x 11 3 8" 76 % 49 lbs (22.2 Kg) (14 L/s-71 L/s) (152 mm) 54.6 cm x 60.6 cm x 28.9 cm PH 10.22 ES* 50-220 CFM 6" Round Dia. Side 10 years 211 2"x 23 7 8"x 16 1 2" 82 % 59 lbs (26.8 Kg) (24 L/s-104 L/s) (152 mm) 54.6 cm x 60.6 cm x 41.9 cm *This product earned the ENERGY STAR by meeting strict energy efficiency guidelines set by Natural Resources Canada and the US EPA. It meets ENERGY STAR requirements only when used in Canada. PH 7.15 & 10.22 HRV 4 operating modes (ECONO**, INTERMITTENT, CONTINUOUS and HIGH SPEED) The professional residential series Quick & simple installation Integrated door pressure balancing taps Slim compact design Lifetime limited warranty on the heat recovery core Model Airflow ISF TM Port Variable Motor Dimensions Adjusted Sensible Recovery Weight HRV Performance Collar System Location Speed Warranty (H x W x D) Efficiency ASRE% @ 0º C (Approx.) PH 7.15 30-160 CFM 6" Round Dia. Side 10 years 211 2"x 23 7 8"x 11 3 8" 73 % 48.5 lbs (22 Kg) (14 L/s-76 L/s) (152 mm) 54.6 cm x 60.6 cm x 28.9 cm PH 10.22 50-220 CFM 6" Round Dia. Side 10 years 211 2"x 23 7 8"x 16 1 2" 82 % 58.5 lbs (26.5 Kg) (24 L/s-104 L/s) (152 mm) 54.6 cm x 60.6 cm x 41.9 cm
PE 7.15 & 10.22 ERV 4 operating modes (ECONO**, INTERMITTENT, CONTINUOUS and HIGH SPEED) Revolutionary ERV Technology Water washable membrane allows the core to be cleaned thoroughly Integrated door pressure balancing taps Advanced polymer membrane 5-year limited warranty on the energy recovery core Model Airflow ISF TM Port Variable Motor Dimensions Adjusted Sensible Recovery Weight ERV Performance Collar System Location Speed Warranty (H x W x D) Efficiency ASRE% @ 0º C (Approx.) PE 7.15 30-160 CFM 6" Round Dia. Side 10 years 211 2"x 23 7 8"x 11 3 8" 73 % 47.5 lbs (21.5 Kg) (14 L/s-76 L/s) (152 mm) 54.6 cm x 60.6 cm x 28.9 cm PE 10.22 70-220 CFM 6" Round Dia. Side 10 years 211 2"x 23 7 8"x 16 1 2" 77 % 57.5 lbs (26.1 Kg) (33 L/s-104 L/s) (152 mm) 54.6 cm x 60.6 cm x 41.9 cm LCH SERIES 700 & 1200 HRV/ERV 3 operating modes (INTERMITTENT, CONTINUOUS and HIGH SPEED) Variable speeds Modular cross-flow core technology 15-year limited warranty on the heat recovery core 2-year limited warranty on ventilation motors 2-year limited warranty on all other components Model Airflow Port Core Duct Dimensions Weight HRV/ERV Performance Location Type Dimensions (H x W x D) (Approx.) LCH 30-700A 300-700 (142 L/s-330 L/s) Side Aluminum 8"x 14" (203.2 mm x 355.6 mm) 25"x 38 1 2"x 32 1 2" (64.2 cm x 97.9 cm x 82.5 cm) 204 lbs (92.5 Kg) LCH 30-700C* 300-700 (142 L/s-330 L/s) Side Enthalpic 8"x 14" (203.2 mm x 355.6 mm) 25"x 38 1 2"x 32 1 2" (64.2 cm x 97.9 cm x 82.5 cm) 205 lbs (93 Kg) LCH 70-1200A 700-1200 (330 L/s-566 L/s) Side Aluminum 8"x 20" (203.2 mm x 508 mm) 25 7 8"x 44 3 4"x 47 5 8" (65.7 cm x 113.7 cm x 121 cm) 306 lbs (138.8 Kg) LCH 70-1200C* 700-1200 (330 L/s-566 L/s) Side Enthalpic 8"x 20" (203.2 mm x 508 mm) 25 7 8"x 44 3 4"x 47 5 8" (65.7 cm x 113.7 cm x 121 cm) 308 lbs (139.7 Kg) *3-year limited warranty on the energy recovery core.
OPTIONAL WALL CONTROLS - HRV/ERV Programmable ventilation control with 12 operating modes to choose from. MAX MED MIN SUMMER/ÉTÉ VENT RECIRC 20 MIN/HR 88 % VECTRA EHC 1.5 DC model TM Friendly Energy Savings Mode Programmable digital control High contrast LCD Display backlight LCD interface provides instant system feedback Stylish Decora design Entry level ventilation control with 7 operating modes to choose from. VENTILATION ON/OFF ECONO VENT 20 MIN/HR OFF PREF VECTRA EHC 1.0 TC model TM Friendly Energy Savings Mode Simple user interface (no programming) LED provides instant system feedback Stylish Decora design Blends perfectly with any decor The RD-1 model TM allows the homeowner to select the humidity percentage. RD-1 model TM Dehumidistat to select the humidity level The RD-3P and RD-3D models allows the selection of humidity percentage, fan range and operation modes. RD-3P model TM PROFESSIONAL Dehumidistat to select the humidity level Speed Control (Off, Normal and Reduced) Mode Control (Intermittent and Continuous) Light On/Override Indicator RD-3D model TM DEHUMIDISTAT DELUXE Added Mode Control (Intermittent, Recirculation and Continuous) Compatible with the model XDH and the SS3.12DD Series only The T-3 allows high speed ventilation for 20, 40 or 60 Minutes. T-3 model TM Push-button TIMER 20 /40 /60 minutes Offers 20/40 or 60 minutes at maximum ventilation capacity. The RD-2 model TM allows the homeowner to select the humidity percentage and fan range. RD-2 model TM Dehumidistat to select the humidity level Speed Control (Off, Normal and Reduced) Light On / Override Indicator The RD-4P and RD-4D models allows the selection of humidity percentage, fan range, operation modes and cycles per hour. RD-4P model TM PROFESSIONAL Dehumidistat to select the humidity level Speed Control (Off, Normal and Reduced) Mode Control (Intermittent and Continuous) Cycles per hour (0/0, 20/40 and 30/30) Light On/Override Indicator Maintenance Light Reminder RD-4D model TM DEHUMIDISTAT DELUXE Added Mode Control (Intermittent, Recirculation and Continuous) Compatible with the model XDH and the SS3.12DD Series only
ECERTIFIED AND TESTED M QUALITY ACCESSORIES for optimal performance of your HRV/ERV system HEPA HS 3.0 99.97% HEPA DIA Ultra-quiet operation Whole House HEPA Filtration System 99.97% HEPA certified & tested media 2 operating speeds (200 or 300 cfm) 10-year limited warranty on motor Plenum or duct mount Dimensions 22"x 17"x 13" (55.9 cm x 43.2 cm x 33 cm) IFB6 PF & IFB6 PCF (Inline Filter Box) 22 ga. Pre-painted fully insulated cabinet. Round duct connections 6" (152 mm) dia. ISF Collar. Hinged sealed door for easy maintenance. Classified culus Class 2 MERV 8 filter. Dimensions 13"x 14 1 4"x 19" (33 cm x 36.2 cm x 48.3 cm) The matrix TM 2 in 1 Single Port Ventilation Hood Single port 7 1 16"x 8 1 16" (179 mm x 205 mm) to exterior wall Simple & easy to install Oval 6" (152 mm) dia. connections Ideal for HRV or ERV Residential or condo applications Screen design prevents birds & rodents from entering 100% U.V. Resistant Premium Intake & Exhaust Hood with Metal Screen For general purpose venting Designed for maximum airflow Built-in pest guard UV resistant paintable plastic Supply & Exhaust applications Available in 3" (76.2 mm), 4" (101.6 mm), 5" (127 mm), 6" (152 mm) and 7" (177.8 mm) Available in white, brown and black Soffit Exhaust Vent Round R2 Style Ventilation Hoods Vents moisture & odors to the outside Low profile flush mount design Mounts easily under soffit Designed with butterfly damper for maximum airflow and energy conservation Adapts to 4" (101.6 mm) and 6" (152 mm) dia. round exhaust duct UV resistant plastic Available in white and black Designed for maximum airflow Supply & Exhaust applications Energy efficient airtight construction Weighted damper prevents back-draft 100% gasket seal provides quiet efficient operation Available in 3 1 4"x 10 (82.6 mm x 254 mm), 3" (76.2 mm), 4" (101.6 mm), 5" (127 mm) and 6" (152 mm) 100% U.V. Resistant Available in white, brown & black Airflow Balancing Grid Insert type airflow-monitoring grid Design for round rigid duct. Easy & fast install Accurate balancing Integrated High / Low balancing connection Balancing chart in CFM or L/s DR-Series Round Air Diffuser with Collar For wall and ceiling applications Fully adjustable air-flow Available in 4" (101.6 mm), 5" (127 mm), 6" (152 mm) and 8" (203.2 mm) Includes mounting collar Can be used as a supply or exhaust air diffuser
HRV / ERV Heat or Energy Recovery Ventilation Systems Imperial Air Technologies 480 Ferdinand Blvd., Dieppe, NB Canada E1A 6V9 Toll free: (800) 561-3100 Fax: (506) 388-4633 Visit us at: www.greentek.ca You can find Greentek Indoor Air Quality products at the following distributor: PP0765 JAN2017 Imperial Air Technologies Inc. reserves the right to modify a product, without prior notice, whether in design, colour or specifications, in order to offer at all times a quality product that is highly competitive. Please consult your national and local building codes to find out whether the installation of electrical products requires the services of a certified technician or electrician. Greentek is a registered Trademark used under license by Imperial Manufacturing Group TM. All rights reserved.