UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTU Boss Fittings KORD INDUSTRIAL INC. 866.874.5673
Products Recommended for Steam Service Quick Disconnect Fittings Quick disconnect fittings (socket and plug) are available in solid brass with stainless steel springs and locking balls in sizes ¼" through ½". Dry Disconnect Fittings Dry disconnect fittings (coupler and adapter) are available in stainless steel, with EPDM seals in sizes ¾" and ". GJ Boss Female Ground Joint Fittings GJ Boss female ground joint fittings are available in plated steel and/or iron in sizes ¼" through 6". Boss Female Washer Seal Fittings Boss female washer seal fittings are available in plated steel and/or iron in sizes 3/8" through 3". Boss Male Stems Boss male stems are available in steel bar stock in sizes ¼" through "; iron in sizes ¼" through 4"; 36 stainless steel in sizes ½" through 4" and brass in sizes ¾" through 3". Boss Clamps Boss clamps in the 2-bolt and 4-bolt style are available in plated iron in sizes ¼" through 3"; stainless steel in sizes ½" through 3" and brass in sizes ½" through. Boss clamps in the three-piece style are available in plated iron in sizes 3" through 6". 80 Steam Gauge Siphon 80 steam gauge siphon is available in steel and red brass pipe in ¼". In order to prevent live steam from entering a pressure gauge bourdon tube a siphon filled with water should be installed between the gauge and the process line. 250 PSIG Steam Ball Valve 250 lb. steam ball valves are available with a ed bronze valve, 36 stainless steel ball and stem in sizes ½" through. Note: Pressurized steam is an extremely dangerous commodity. Only hose, fittings, clamps and accessory items that have been approved for steam service should ever be used! Never use an unapproved item for steam service. Always follow the manufacturer's product recommendations for pressurized steam handling.
Steam Quick Disconnect Couplings Applications: Designed exclusively for steam applications, the coupler and plug are solid brass with stainless steel springs and locking balls. The coupler has a large plated steel sleeve especially designed for easier gripping with gloves. Two ethylene propylene O-rings in the coupler and one ethylene propylene O-ring in the plug provide double protection against leaks. Rated to 00 PSI gauge saturated steam (338 F). Warning: Do Not Disconnect Under Pressure!! poppet valve coupler Body Female /4" /4" B6-200S 3/8" 3/8" B6-300S / / B6-400S 3/4" 3/4" B6-600S " " B6-800S -/ -/ B6-200S poppet valve plug Body Female /4" /4" B7-200S 3/8" 3/8" B7-300S / / B7-400S 3/4" 3/4" B7-600S " " B7-800S -/ -/ B7-200S Dry Disconnect Fittings for Steam Service Applications: Designed to fit hoses carrying steam used in chemical (heating), pharmaceutical (disinfection and sterilization) and at loading bays Materials: coupling house and all inner parts: stainless steel seals: EPDM (standard), other materials available, unintentional separation is eliminated preventing accidents and avoiding unintended down time performance unaffected by surface rust lockable versions are available, Female Body coupler Stainless Steel 3/4" 56mm DDSC075SS " 56mm DDSC00SS Female Body adapter Stainless Steel 3/4" 56mm DDSA075SS " 56mm DDSA00SS
Boss Coupling System The spud part of the coupling serves as one half of the connection and is usually fixed to the equipment. The stem part that is clamped to the hose is the other half. The two halves are connected or disconnected by rotating the onto the spud. When connected they achieve a mechanical, as well as, a pressure seal. Services: Boss couplings are all-purpose hose couplings, universally recommended for steam hose connections. They are also widely used for air, water, fluid petroleum, chemicals and liquid petroleum gas up to " ID. Boss couplings can be applied to many types of rubber, synthetic, plastic, metallic or semi-metallic hose. Consult the factory for specific media capabilities. Purpose: Boss couplings supply a convenient ed fitting to connect two lengths of hose, or a single length to a male or female ed () outlet. Material: stem: ¼" - " plated steel, ¼" - 4" plated iron, 6" tubular steel spud: ¼" - " plated steel, ¼" - 6" plated iron : ¼" plated steel, 3/8" - 6" plated iron Seal Types: ground joint: copper or polymer seats washer: Klingersil C-440 Worn-out hose couplings can be dangerous. They should be checked regularly and replaced when necessary. Each coupling user should review applications and add safety devices where indicated.
GJ Boss Ground Joint Seal Positive Metal-to-Polymer Seal A leakproof seal is formed when the metal head of the stem makes contact with the patented polymer seat in the spud. The non-metallic polymer seat resists most chemicals found in manufacturing facilities. (reference corrosion resistance chart on pages 694-699) recommended for steam service up to 450 F easy to seal works with existing fittings plated steel and / or iron use with Boss clamps Hose Shank x complete female stem knurled nut /4", 3/8" and 6" come only with copper seat spuds 2 /4" GF GBA 00 SLS4 00 --- 3/8" GF3 GCA 00 CB 00 --- / GF6 GB 00 B2 00 --- / x 3/4" GF26- GB6-50 B2 25 --- 3/4" GF26 GB6 50 B2 25 KB2 " GF36 GB 50 B2 25 KB2 -/4" GF5 GB6 25 B7 25 --- -/ GF6 GB2 25 B7 25 --- GF8 2 GB26 2 0 B27 0 --- 2-/ GF96 GB3 5 B32 5 --- 3" GF GB36 5 B37 5 --- 4" GF4 GB46 5 B47 5 --- 6" GF20 GB66 2 B67 2 --- /4", 3/8" and 6" come only with copper seat spuds female spud male spud double spud Thread /4" GBC 00 --- --- 3/8" GCC 00 GMC --- / GB3 00 GM3 GDB3 3/4" GB8 50 GM8 GDB3 " GB3 50 GM3 GDB3 -/4" GB8 25 GM8 GDB23 -/ GB23 25 GM23 GDB23 GB28 0 GM28 GDB28 2-/ GB33 5 GM33 GDB33 3" GB38 5 GM38 GDB38 4" GB48 5 6" GB68 2
Boss Fittings Boss Holedall Fittings Applications: Boss Holedall fittings are designed for air and liquid applications where a permanent, low profile clamping system is desired. Both fittings are supplied with carbon steel ferrules. specifications. ¾" " ½" 3" Hose OD From: -0/64" -5/64" -9/64" -30/64" -35/64" -39/64" -20/64" 2-/64" 2-9/64" 2-36/64" 2-4/64" 2-49/64" 3-26/64" 3-4/64" 3-49/64" Plated Iron / Steel To: Stainless Steel -4/64" -8/64" -22/64" -34/64" -38/64" -42/64" 2-8/64" 2-6/64" 2-40/64" 2-48/64" 2-56/64" 3-40/64" 3-48/64" 3-56/64" Not for steam service. GF26P GF26P2 GF26P3 GF36P GF36P2 GF36P3 GF6P GF6P2 GF6P3 GF8P GF8P2 GF8P3 GFP GFP2 GFP3 RGF6P RGF6P2 RGF8P RGF8P2 Boss Adapters These fittings have male or female s and are designed to fit the standard ground joint spuds.supplied with a wing nut, as shown. Feature: plated steel and / or iron male adapters ¾" " ¼" ½" GMAS6 GMAS GMAS6 GMAS2 GMAS26 Pkg 25 25 0 0 0 uses a special, part # B27-3 female adapters ¾" " ¼" ½" GFAS6 GFAS GFAS6 GFAS2 GFAS26 Part is produced as a welded fabrication. Boss Wing Nut Caps plated steel and / or iron Supplied with chain and washer. For best results, use with washer style spuds and washers. Boss caps are not intended for pressure applications. ¾" and " ¼" and ½" 3" B2SC B7SC B27SC B37SC 25 25 0 5
36 Stainless Steel Ground Joint recommended for steam service up to 450 F complete female stem female spud ¾" RGF26 RGB6 RB2 RGB8 " RGF36 RGB RB2 RGB3 ¼" RGF5 RGB6 RB7 RGB8 ½" RGF6 RGB2 RB7 RGB23 RGF8 RGB26 RB27 RGB28 Brass Ground Joint complete female stem female spud ¾" BGF26 BGB6 BB2 BGB8 " BGF36 BGB BB2 BGB3 ¼" BGF5 BGB6 BB7 BGB8 ½" BGF6 BGB2 BB7 BGB23 BGF8 BGB26 BB27 BGB28 36 Stainless Steel Washer Style complete female stem female spud washer 2 ¾" RWF26 RB6 RB2 RB8 W2 " RWF36 RB RB2 RB3 W2 ¼" RWF5 RB6 RB7 RB8 W7 ½" RWF6 RB2 RB7 RB23 W7 RWF8 RB26 RB27 RB28 W27 2 washer is nitrile rubber bonded, non-asbestos Klingersil C-440 Brass Washer Style available, consult Dixon for pricing and availability.
Washer Type A Klingersil C-440 washer is inserted between the stem and spud. A leakproof seal is formed by rotating the and hammering it tight. recommended for steam service up to 450 F easy to seal works with existing fittings plated steel and / or iron use with Boss clamps found on pages 99 and 00. Boss Fittings Boss Washer Seal Hose Shank x complete female stem knurled nut 3/8" WF3 SS337 00 CB 00 --- --- --- / WF6 B 00 B2 00 --- --- --- / x 3/4" WF26- B6-50 B2 25 --- --- --- 3/4" WF26 B6 50 B2 25 KB2 25 " WF36 B 50 B2 25 KB2 25 -/4" WF5 B6 25 B7 25 --- --- --- -/ WF6 B2 25 B7 25 --- --- --- WF8 B26 0 B27 0 --- --- --- 2-/ WF96 B3 5 B32 5 --- --- --- 3" WF B36 5 B37 5 --- --- --- female spud male spud double spud washer Thread 3/8" CC 00 WMC --- WBC / B3 00 WM3 DB3 W2 3/4" B8 25 WM8 DB3 W2 " B3 50 WM3 DB3 W2 -/4" B8 25 WM8 DB23 W7 -/ B23 25 WM23 DB23 W7 B28 0 WM28 DB28 W27 2-/ B33 5 --- --- W32 3" B38 5 WM38 DB38 W37 washer is nitrile rubber bonded, non-asbestos Klingersil C-440
Boss Male Stems plated steel barstock plated iron 36 stainless brass Hose x Plated Steel Bar Stock Plated Iron 36 Stainless Brass /4" x /8" MS4X2 25 --- --- --- ½" RMS --- --- /4" x /4" MSA 50 --- --- --- ¾" RMS6 ¾" BMS6 /4" x 3/8" MSB 25 --- --- --- " RMS " BMS 3/8" x /4" MS6X4 25 ¼" MS6 20 ¼" RMS6 ¼" BMS6 3/8" x 3/8" MSC 00 ½" MS2 20 ½" RMS2 ½" BMS2 3/8" x / MS6X8 25 MS26 0 RMS26 BMS26 / x /4" MS8X4 25 2½" MS3 5 2½" RMS3 --- / x 3/8" MS8X6 50 3" MS36 5 3" --- --- 3" BMS36 / x / MS 25 4" MS46 2 4" --- --- --- --- / x 3/4" MS8X2 25 --- --- --- --- --- --- --- --- 3/4" x / MS2X8 25 --- --- --- --- --- --- --- --- 3/4" x 3/4" MS6 25 --- --- --- --- --- --- --- --- 3/4" x " MS2X6 25 --- --- --- --- --- --- --- --- " x 3/4" MS6X2 25 --- --- --- --- --- --- --- --- " x " MS 25 --- --- --- --- --- --- --- --- Use with Boss clamps on pages 99 and 00. For safety tags and safety tape see page 672. LP-Boss Male Stems schedule 80 stems meet NFPA 58 male end Boss Hose Menders beveled end Plated Steel 36 Stainless Schedule 80 Plated Steel Unplated Steel ¼" LP6 --- --- LP6-80 --- --- ½" LP2 --- --- LP2-80 --- --- LP26 --- --- LP26-80 LPB26 2½" LP3 --- --- --- --- --- --- 3" LP36 RLP36 --- --- LPB36 4" LP46 RLP46 --- --- --- --- 6" LP66 --- --- --- --- --- --- collars engage gripping fingers of Boss clamps ¾" - 3" plated iron; ½" plated steel ½" M ½" M2 ¾" M6 M26 " M 2½" M3 ¼" M6 3" M36 polymer seat Boss Spud x Hose Shank " GH3 GH2826 Steel