TS 99 EN 5 Freeswing slide channel door closer in Contur design
DORM TS 99 Freeswing slide channel door closer For easy use of fire and smoke check doors combined with safe closing in an emergency. The DORM TS 99 FL in the Contur design is a holdopen device with a freeswing function from a door opening angle of > 0, which, combined with a smoke detector system (e.g. DORM RMZ), can be used as a holdopen system for fire doors. n integrated solution, i.e. holdopen device with freeswing function from a door opening angle of > 0, plus Plus points For the trade Ideal complement to the product range Clear range structure for easy stock management For the installer/fabricator Easy and quick to fit Flexible application suitability thanks to standard leaf or overhead transom installation For the architect/specifier Meets legal requirements for barrierfree building Universally suitable for single or double doors F pproval certification TS 99 FL The DORM TS 99 FL is approved and certified by the MP NRW, Dortmund, to EN 1155. TS 99 FLR The DORM TS 99 FLR is approved and certified by the MP NRW, Dortmund, to EN 1155. pproved by the German Institute for uilding Technology, erlin, TS 99 FLRK The DORM TS 99 FLRK is certified and approved by the MP NRW, Dortmund, to EN 1155. pproved by builtin smoke detector system, is also available in the form of the DORM TS 99 FLR or TS 99 FLRK. In both systems, the door can be operated without resistance thanks to their freeswing feature. In the event of an alarm or power failure, however, the door isreliably closed by the reinstated action of the door closer. Certified to ISO 90001. Uniform appearance matching all products of the DORM Contur design For the user Freeswing function from a door opening angle of > 0 Resistancefree opening of doors in passive/preventive fire protection applications Maximum degree of user safety When using the TS 99 FL in a transommounted arrangement, a certificate of compliance in conjunction with the relevant fire and smoke check door is mandatory. for use as a holdopen system. n acceptance inspection is mandatory. Certificate of compliance in conjunction with the fire and smoke check door concerned is additionally required. the German Institute for uilding Technology, erlin, for use as a holdopen system. n acceptance inspection is mandatory. Data and features Note ccording to the regulations governing holdopen systems issued by the Institute of uilding Technology (DIt), erlin, a manual release switch (e.g. DORM HT) must be provided for freeswing door closers. TS 99 FL TS 99 FLR TS 99 FLRK djustable spring strength setting Size EN 5 EN 5 EN 5 Standard doors 150 mm Fire and smoke check doors 150 mm Nonhanded Slide channel Closing speed adjustable at valve Latching action adjustable at valve Cushioned limit stay, mechanical " " " Freeswing function from a door opening angle of > 0 Weight in kg 5, 5,9 5,7 Dimensions in mm (without slide channel) Length Overall depth Height 413 5 71 785 5 71 413 5 71 Door closer compliant with EN 1154 Holdopen device compliant with EN 1155 Holdopen device compliant with DIN EN 14637 under preparation mark for building products Functions Smoke detector Release device Power supply unit Smoke detection Scattered light principle Optical sensor Connection of other detectors Total installed load (max.) for further detectors in W 7,8 7,8 LED indicators larm Standby Maintenance due Contaminated Input voltage 4 V DC 30 V C 30 V C ± 15 % + 10 %/ 15 % + 10 %/ 15 % Output voltage 4 V DC 4 V DC Power consumption in W 14,8 14,8 Floating changeover contact, safety extra low voltage (SELV) Reset utomatic Selector for manual reset Connection terminals for external manual release 4 V C/DC 4 V C/DC This switch must be red and carry the inscription Close Door. The switch must be located in the immediate vicinity of the door and must not be hidden by the opened door. Degree of protection IP 0 IP 0 Yes No " Option
DORM TS 99 FL 506,5 31 48 106 70 16 11 16 3 5 93 4 64 160 00 413 DORM TS 99 FLR 785 5 430 69 131 9 64 3 106 71 18 18 16 11 16 31 48 441 DORM TS 99 FLRK 40 48 83 115 71 16 11 16 18 18 30 5 4 93 00 64 160 413 Freeswing function from an opening angle > 0 s the door is opened, the freeswing function is activated from an opening angle of > 0. The freeswing function enables the door to be opened with ease by reducing the amount of resistance encountered by the user. The door remains freely operable and is not automatically closed, facilitating access in both directions in heavily frequented zones and passageways. In the event of a fire or power failure, the door is automatically and safely closed by the door closer. This system is ideal for ensuring the closure of fire and smoke check doors in senior homes, centres for the disabled, hospitals and clinics. 1 Freeswing range Fully controlled closing action (mechanical) 1 3
DORM TS 99 FL Holdopen device with freeswing function pplications and fixing max. 10 3 143 150 441 48 4 65 16 110 10 7 34 4 V DC 78 175 14 160 DORM TS 99 FL door closer, standard application (door leaf fixing) Examples: nticlockwiseclosing (ISO 6/LH) door; mirrored arrangements apply to clockwiseclosing (ISO 5/RH) doors 450 171 00 ø 8 4 V DC max. 7 78 11 36 41,5 3 84 150 48 143 441 175 8,5 40 DORM TS 99 FL door closer, frame mounted (transom fixing) Examples: nticlockwiseclosing (ISO 6/LH) door; mirrored arrangements apply to clockwiseclosing (ISO 5/RH) doors 4
DORM TS 99 FLR 1 3 4 5 Holdopen device with freeswing function TS 99 GSREMR TS 93 GSREMR 504 16,5 171 00 430 max. 7 78 ø 14 (30 V C) ø 14 (4 V DC) 3 41,5 11 36 84 min. 10 7 min. 10 150 143 175 48 441 30 1 3 4 5 99 FLR TS 99 FLRK TS 99 GSREMR TS 93 GSREMR/G RMZ TS 93 EMR TS 93 GSREMR DORM TS 99 FLR door closer Examples: nticlockwiseclosing (ISO 6/LH) door; mirrored arrangements apply to clockwiseclosing (ISO 5/RH) doors max. 10 ø 1 (30 V C) 150 48 4 ø 10 (4 V DC) 40 15 71 30 5 4 16 65 110 4 V DC 43,5 10 7 5 78 4 171 14 160 00 5 DORM TS 99 FLRK door closer Examples: nticlockwiseclosing (ISO 6/LH) door; mirrored arrangements apply to clockwiseclosing (ISO 5/RH) doors 5
DORM TS 99 FL pplication on double doors The modular TS 93 GSR system also enables the use of the TS 99 FL EN 5 on the active leaf of double doors. s the door is opened, the freeswing function is activated from an opening angle of > 0 at the active leaf. The door remains freely operable and is not automatically closed, which facilitates access in doors located in heavily frequented areas. The GSR system ensures the closure of double doors in the correct sequence: first the inactive leaf then the active leaf. The system operates independently of the door closer hydraulics using a push rod clamping arrangement with protective overload release. The door release/closer activator mechanism is integrated in the slide channel. DORM TS 99 FL GSR DORM TS 99 FL GSREMF 1 Door coordinator with freeswinging active leaf The GSR system ensures the closure of double doors in the correct sequence: first the inactive leaf then the active leaf. Door coordinator with freeswinging active leaf and electromechanical holdopen of the inactive leaf The GSREMF 1 system ensures the closure of double doors in the correct sequence: first the inactive leaf then the active leaf. It also facilitates the combined holdopen of both door leaves. The inactive leaf can be held at an angle between 80 and 130, and the active leaf is held open at any angle up to max. 150 by the door coordinator. In the event of an alarm or power failure, the holdopen is released and the door coordinator ensures that the door leaves close in the correct sequence. The release signal is emitted by external smoke detectors (e.g. DORM RMZ in the Contur design). DORM RMN units can also be connected as a second and third detector. With adjustable pulloff force (no tools required), the holdopen can also be readily released by hand. Note: The holdopen point of the inactive leaf is always located at the maximum door opening angle install a door stop at this position. 4 43 84 14 TS 93 160 Inactive leaf Minimum width 370 mm in the case of unequal leaves 470 DORM TS 99 FL GSREMR 1 Door coordinator with freeswinging active leaf, electromechanical holdopen of the inactive leaf and integral smoke detector The GSREMR 1 system. ensures the closure of double doors in the correct sequence: first the inactive leaf then the active leaf. It also facilitates the combined holdopen of both door leaves. The inactive leaf can be held at an angle between 80 and 130, and the active leaf is held open at any angle up to max. 150 by the door coordinator. In the event of an alarm or power failure, the holdopen is released and the door coordinator ensures that the door leaves close in the correct sequence. Holdopen release is initiated by the GSREMR via a smoke detector integrated in the door coordinator. DORM RMN units can also be connected as a second and third detector. With adjustable pulloff force (no tools required), the holdopen can also be readily released by hand. Note: The holdopen point of the inactive leaf is always located at the maximum door opening angle install a door stop at this position. 4 43 84 14 Inactive leaf 34 TS 93 160 470 6
Ø8 (4 V DC) 115 470 TS 99 FL 78 10 110 160 14 4 V DC Installation dimension (mm) Door width (mm) 88 10 1350 34 > 1350 500 ctive leaf 50 444 470 34 31 95 Ø10 (30 V C),5,5 Ø8 (4 V DC) TS 99 FL 78 10 110 1700500 160 14 4 V DC ctive leaf 7
DORM TS 99 pplication examples Holdopen system DORM TS 99 FL + RMZ + x RMN RMN 30 VC RMN RMZ x 11 KΩ x 11 KΩ TS 99 FL HT T C 1 34 + T C 1 34 + 1 3 1110 14 DORM RMN DORM RMN 7 8 9 16 1 4 HT Junction box by others Fuse by others 10 TS 99 FL 11 KΩ N RMZ PE L 30 V C ± 10% Recommended cabling: I Y (St) Y x x 0,6 DORM TS 99 FLR + x RMN RMN 30 V C RMN TS 99 FLR x 11 KΩ x 11 KΩ HT T C 1 34 + T C 1 34 + 1 3 1110 14 DORM RMN DORM RMN 7 8 9 16 1 4 1 4 1 HT Junction box by others Fuse by others 10 11 KΩ N PE TS 99 FLR L 30 V C ± 10% Recommended cabling: I Y (St) Y x x 0,6 8
DORM TS 99 FLRK + x RMN RMN 30 V C RMN x 11 KΩ x 11 KΩ TS 99 FLRK HT C T 1 34 + C T 1 34 + 1 3 1110 14 DORM RMN DORM RMN 7 8 9 16 1 4 HT Junction box by others Fuse by others 10 11 KΩ N PE TS 99 FLRK L 30 V C ± 10% Recommended cabling: I Y (St) Y x x 0,6 DORM TS 99 FL GSREMR 1 + x RMN RMN RMN 30 VC GSREMR TS 99 FL TS 93 x 11 K? x 11 K? ctive leaf Inactive leaf HT T C 1 34 + T C 1 34 + 1 3 11 10 14 DORM RMN DORM RMN 7 8 9 16 1 4 HT Junction box by others Fuse by others 10 11 K? N PE L TS 93 GSREMR 30 V C ± 10% Recommended cabling: I Y (St) Y x x 0,6 9
DORM RMZ DORM RMN Smoke detectors The DORM RMZ in the Contur design and DORM RMN smoke detectors provide the ideal complement to the DORM TS 99 FL system for passive/preventive fire protection. They are designed in accordance with the latest codes DORM RMZ The DORM RMZ smoke detector in the Contur design provides a 4V DC supply for all the holdopen devices connected to it. In the event of an alarm or power failure, it deenergises the devices (release function). It has an automatic reset which can be switched to manual mode if required. floating (novolt) changeover contact and connections 378 357,5 issued by the German Institute for uilding Technology and ensure perfect interaction between all the devices employed for holdingopen fire and smoke check doors whatever the situation. for both further detectors and for an external manual release device are also provided. The unit is available in the RMZ version with a stabilised power pack, or in the RMZ DCW version without a power pack for integration in building management and control systems via a DCW bus and the DORM TMS door management system. 34 30 Data and features RMZ RMN Functions Smoke detector Release device Power supply unit Smoke Scattered light principle detection (optical sensor) Fixing Lintel or transommounted Ceilingmounted Connection of other detectors Total installed load (max.) for holdopen device and other detectors in W 9,8 Power consumption of internal detectors in W 1, 0,65 LED larm indicators Standby Maintenance due Contaminated Input voltage 30 V C 4 V DC ± 10 % +15%, 10% Output voltage 4 V DC Detector operating voltage 4 V DC 4 V DC +15%, 10% Input current (max.) in m 75 0 Floating (novolt) changeover contact 4 V 30 V Safety extra low voltage (SELV) C/DC C/DC 1 Reset utomatic Can be changed to manual reset Functional check Smoke detection Connection terminals for external manual release Degree of protection IP 30 IP 43 mbient temperature in C 0, +40 10, +60 Weight in kg 0,5 0,15 Dimensions Length 379 in mm Overall depth 34 ø 100 Height 30 44 Compliant with EN 54 Part 7 mark for building products Yes No DORM RMN The DORM RMN smoke detector ensures the early detection both of smouldering fires and open fires 44 Ø 100 with smoke evolution. It can be connected to all DORM holdopen systems. F pproval certification DORM RMZ in the Contur design and DORM RMN smoke detectors have been granted general building approval by the German Institute for uilding Technology, erlin; acceptance inspection mandatory in Germany. 10
Holdopen systems Regulations/Information The use of holdopen systems is subject to special regulations based on official approval requirements. These relate in particular to the final inspection (acceptance), continuous monitoring and maintenance. The regulations and instructions provided below are intended as an aid, pursuant to statutory regulations that apply e.g. in Germany, to ensure that all participants are properly informed of the most important requirements that relate to the installation and operation of holdopen systems. Further information can be found in the following documents: Richtlinien für Feststellanlagen des Deutsches Instituts für autechnik, erlin [Code of practice relating to holdopen systems issued by the German Institute for uilding Technology, erlin] General building regulations pertaining to the approval of the holdopen system concerned EN 1155 DIN EN 14637 1. General 1.1 In the case of fire doors (and similar shutters/closures/ barriers) that are held open by holdopen systems, the sweep area necessary for the closing operation must be kept constantly clear. This area must be clearly identified by lettering, floor markings or similar. Where necessary, structural measures must also be implemented to ensure that cables, leads, lines, pipes, stored/deposited goods or components (e.g. false ceilings or other overhead items/elements) are reliably prevented from falling into the sweep area. 1. Wherever possible, smoke detectors should be used for holdopen systems. For holdopen systems for fire doors in emergency escape routes, smoke detectors must be used. 1.3 Each holdopen device must also be capable of being released by hand, without adversely affecting the functional capabilities of the automatic release device. In the case of door closers with electromagnetic holdopen, the manual release may be performed by a small tug applied to the door leaf. If holding electromagnets or freeswing door closers are used, a pushbutton must be provided to facilitate manual release. The manual release pushbuttons employed for this purpose must be red and carry the wording Close Door or equivalent. The pushbutton must be located in the immediate vicinity of the door and must not be concealed by the door when this is held open.. Final inspection (acceptance).1 In Germany and countries governed by DIN regulations: Following onsite installation of the operable holdopen system, its functional integrity and quality of installation must be confirmed by an acceptance inspection procedure. The acceptance inspection may only be performed by skilled personnel of manufacturers of monitoring and/or holdopen devices, skilled personnel authorized by same, or skilled personnel from an accredited inspection agency.. In Germany and countries governed by DIN regulations: Once the acceptance inspection has been successfully completed, the operator shall permanently fix on the wall in the immediate vicinity of the door, a plate supplied by the manufacturer of the holdopen system measuring 105 mm x 5 mm and carrying the inscription Holdopen system Inspected by... (company logo with month and year of acceptance inspection) or equivalent.3 The operator is to be provided with a certificate detailing the successful acceptance inspection; this certificate must be retained by the operator. 3. Periodic surveillance 3.1 The holdopen system must be kept by the operator in a constantly good operating condition, and inspected at least once a month to ensure that it is functioning properly. 3. In addition, the operator is obliged at least once a year, or at shorter intervals if specified in the approval certificate, to inspect all the devices to ensure that they are operating and interacting properly and without fault, and to carry out or instigate adequate maintenance. The associated test, inspection and the maintenance work may only be performed by an expert or an appropriately trained person. 3.3 The scope, result and time of the periodic inspection are to be recorded. These records must be retained by the operator. 11
DORM TS 99 Standard equipment and accessories Holdopen device RMZ smoke detector Freeswing action TS 99 FL door closer body, Leaffixed Size EN 5 TS 99 FL door closer body, Transomfixed Size EN 5 Slide channel with freeswing arm assembly yy 5330xx yy 53330xx Slide channel with freeswing arm assembly GSR GSREMF 1 VK 64101001 V 6410001 GSREMR 1 VK 64111001 V 6411001 RMZ smoke detector RMN smoke detector Manual release pushbutton V 6415001 648000xx 64830000 HTUP 35901531 HTP 3590153 # # # # # # Door width (mm) GSR / GSREMF......VK 10 1350...V > 1350 500 GSREMR......V 1700 500 1
TS 99 FLR door closer body Size EN 5 TS 99 FLRK door closer body Size EN 5 TS 99 FL door closer body, Leaffixed Size EN 5 TS 93 door closer body Size EN 5 Cushioned limit stay with freeswing arm assembly, without slide channel, for GSR coordinator fixed to active leaf for GSR door coordinator fixed to inactive leaf y 5338001 y 4300001 35800093 yy 54903xx # yy 543001xx # Y Y Y 1x y 1x y 1x y 1x y 1x y 1x y # # # 1) # # # # # # yy = Closer body complete with slide channel assembly yy = Closer body separate Y = Slide channel separate # = ccessory xx Silver 01 White (sim. to RL 9016) 11 Special colour 09 Stainless steel Design 04 TS 99 FLR only available in 01 and 04 1) Not necessary in the case of the GSREMR1 Design relates to the surface finish of the product 13
DORM TS 99 Specification texts DORM TS 99 FL, Size EN 5 Slide channel door closer compliant with EN 1154, with CE mark, in the Contur design, for door widths up to 150 mm, with electrohydraulic holdopen, compliant with EN 1155, with freeswing action from a door opening angle of > 0. Closing speed and latching action adjustable. Nonhanded. Operating voltage 4V DC. pproved by the German Institute for uilding Technology, erlin, for use in a holdopen system. cceptance inspection mandatory in Germany. In transommounted arrangement, a certificate of compliance in conjunction with the relevant fire and smoke check door is mandatory. Model Y Leaffixed/pull side Y Transomfixed/pull side Y Silver Y White (sim. to RL 9106) Y Stainless steel Design Y Special colour (sim. to RL ) Make DORM TS 99 FL EN 5 DORM TS 99 FLR, Size EN 5 Slide channel door closer compliant with EN 1154, with CE mark, in the Contur design, for door widths up to 150 mm, with electrohydraulic holdopen, compliant with EN 1155, with freeswing action from a door opening angle of > 0. Closing speed and latching action adjustable. Nonhanded. dditional connections available for further detectors, external manual release device and floating (novolt) alarm contact. Power supply 30V C. Operating voltage 4V DC. pproved by the German Institute for uilding Technology, erlin, for use as a holdopen system. cceptance inspection mandatory in Germany. pproval certification with the relevant fire and smoke check door mandatory. Model Y Transomfixed/pull side Y Silver Y Stainless steel Design Make DORM TS 99 FLR EN 5 DORM TS 99 FLRK, Size EN 5 Slide channel door closer compliant with EN 1154, with CE mark, in the Contur design, for door widths up to 150 mm, with electrohydraulic holdopen, compliant with EN 1155, with freeswing action from a door opening angle of > 0. Closing speed and latching action adjustable. Nonhanded. Slide channel with integral power pack and smoke detector, with standby and maintenance due indicators. Overall height 30 mm. dditional connections available for further detectors, external manual release device and floating (novolt) alarm contact. Power supply 30V C. Operating voltage 4V DC. pproved by the German Institute for uilding Technology, erlin, for use as a holdopen system. cceptance inspection mandatory in Germany. Model Y Leaffixed/pull side Y Silver Y White (sim. to RL 9106) Y Stainless steel Design Y Special colour (sim. to RL ) Make DORM TS 99 FLRK EN 5 DORM RMZ Smoke detector in the Contur design, with standby and maintenance due indicators, integral power pack and optical smoke sensor for transom/lintel fixing. For release activation of DORM holdopen devices. floating (novolt) alarm contact and connections for further detectors and external manual release devices are provided. Can be switched to manual reset. Onepiece cover. Overall height 30 mm. General building approval granted by DIt, erlin, for use in a holdopen system. cceptance inspection of the system is mandatory in Germany. Model Y RMZ with integrated power pack. Power supply 30V C, operating voltage 4V DC Y RMZ DCW. Smoke detector without power pack for connection to DCW bus. Y Optional integral alarm module adding an audible signal to the visual indicator. Y Silver Y White (sim. to RL 9106) Y Stainless steel Design Y Special colour (sim. to RL ) Make DORM RMZ DORM RMZ DCW DORM RMN Optical smoke detector, 4V DC, for ceiling fixing. For use as second and third triggering detector on all DORM holdopen systems. With floating (novolt) changeover contact. General building approval granted by DIt, erlin and the VdS, Cologne; compliant to EN 54, Part 7. cceptance inspection mandatory in Germany. Y White (sim. to RL 9106) Make DORM RMN 14
DORM TS 99 FL EN 5 GSR Slide channel door closer on the active leaf, compliant with EN 1154, with CE mark, in the Contur design, for door widths up to 150 mm, with electrohydraulic holdopen complaint with EN 1155, and with a freeswing function from a door opening angle of > 0. Closing speed and latching action adjustable. Nonhanded. Operating voltage 4V DC. Slide channel with integral mechanical door coordinator, compliant with EN 1158. This system operates independently of the door closer hydraulics using a push rod clamping system with a protective overload release and onepiece cover. Overall height 30 mm. Nonhanded. Camaction door closer on the inactive leaf: TS 93 EN 5. pproved by the German Institute for uilding Technology, erlin, for use in a holdopen system. cceptance inspection mandatory in Germany. Model Y Leaffixed/pull side (TS 99 FL on active leaf, TS 93 on inactive leaf) Y Silver Y White (sim. to RL 9106) Y Stainless steel Design Y Special colour (sim. to RL ) Make DORM TS 99 FL GSR DORM TS 99 FL EN 5 GSREMF 1 Slide channel door closer on the active leaf, compliant with EN 1154, with CE mark, in the Contur design, for door widths up to 150 mm, with electrohydraulic holdopen complaint with EN 1155, and with a freeswing function from a door opening angle of > 0. Closing speed and latching action adjustable. Nonhanded. Operating voltage 4V DC. Slide channel with integral mechanical door coordinator, compliant with EN 1158. Electromechanical holdopen, 4V DC, compliant with EN 1155. Holdopen point 80 130 and pulloff force adjustable. This system operates independently of the door closer hydraulics using a push rod clamping system with a protective overload release and onepiece cover. Overall height 30 mm. Nonhanded. Camaction door closer on the inactive leaf: TS 93 EN 5. pproved by the German Institute for uilding Technology, erlin, for use in a holdopen system. cceptance inspection mandatory in Germany. Model Y Leaffixed/pull side (TS 99 FL on active leaf, TS 93 on inactive leaf) Y Silver Y White (sim. to RL 9106) Y Stainless steel Design Y Special colour (sim. to RL ) Make DORM TS 99 FL GSREMF 1 DORM TS 99 FL EN 5 GSREMR 1 Slide channel door closer on the active leaf, compliant with EN 1154, with CE mark, in the Contur design, for door widths up to 150 mm, with electrohydraulic holdopen complaint with EN 1155, and with a freeswing function from a door opening angle of > 0. Closing speed and latching action adjustable. Nonhanded. Operating voltage 4V DC. Smoke detector with standby and maintenance due indicators fully integrated in the housing of the door coordinator. dditional connections available for further detectors, external manual release device and floating (novolt) alarm contact. Power supply 30V C. Operating voltage 4V DC. Slide channel with integral mechanical door coordinator, compliant with EN 1158. Electromechanical holdopen, 4V DC, compliant with EN 1155. Holdopen point 80 130 and pulloff force adjustable. This system operates independently of the door closer hydraulics using a push rod clamping system with a protective overload release and onepiece cover. Overall height 30 mm. Nonhanded. Camaction door closer on the inactive leaf: TS 93 EN 5. pproved by the German Institute for uilding Technology, erlin, for use as a holdopen system. cceptance inspection mandatory in Germany. Model Y Leaffixed/pull side (TS 99 FL on active leaf, TS 93 on inactive leaf) Y Silver Y White (sim. to RL 9106) Y Stainless steel Design Y Special colour (sim. to RL ) Make DORM TS 99 FL GSR EMR 1 15
www.dorma.com Door Control Division worldwide WN 053 811 5153, 01/10,, x. XX. xx/10 Subject to change without notice Door Control utomatic Glass Fittings and ccessories Security/Time and ccess (ST) Central Europe DORM GmbH + Co. KG DORM Platz 1 D5856 Ennepetal Tel. +49 333 7930 Fax +49 333 793495 ustralasia DORM Door Controls Pty. Ltd. 465, bbott Road Hallam/Victoria 3803 ustralia Tel. +61 3979 63555 Fax +61 3979 63955 China/Hong Kong DORM Door Controls (Suzhou) Co. Ltd. No. 9, Hong Feng Road Suzhou Singapore Industrial Park Suzhou, 1501 P.R. of China Tel. +86 51 6761481 Fax +86 51 6761458 DORM Door Controls Pte. Ltd. Room 701, Technology Plaza 651 King s Road North Point Hong Kong Tel. +85 503463 Fax +85 8875370 Emerging Markets DORM GmbH + Co. KG DORM Platz 1 D5856 Ennepetal Tel. +49 333 7930 Fax +49 333 793495 DORM Door Controls (Pty.) Ltd. Kings Court 4 Mineral Crescent Z000 Crown/Gauteng South frica Tel. +7 11 830080 Fax +7 11 830091 Far East DORM Far East Pte. Ltd. No. 31 Gul Lane Singapore 6945 Tel. +65 668 7633 Fax +65 665 7995 Gulf DORM Gulf Door Controls FZE Jebel li Free Zone South Plot No. S 0135 Road No. SW 301 G P.O. ox 1768 Dubai United rab Emirates Tel. +971 4 800400 Fax +971 4 8869100 / 8869101 North merica DORM rchitectural Hardware DORM Drive, Drawer C Reamstown, P 175670411 Tel. +1 800 538483 Fax +1 800 74974 Scanbalt DORM Danmark /S Sindalvej 6 8 DK610 Rødovre Tel. +45 44 543000 Fax +45 44 543001 South merica DORM Sistemas de Controles para Portas Ltda. v. Piracema, 1400 Centro Empresarial Tambore CEP 06400933 arueri/ São Paulo, rasil Tel. +55 11 4689980 Fax +55 11 4689915 SouthEast Europe DORM USTRI GmbH Pebering Strass 5301 Eugendorf Tel. +43 65 84880 Fax +43 65 8491 South Europe DORM Italiana S.r.l. Via. Canova 44/46 I0035 Lissone (MI) Tel. +39 039 44031 Fax +39 039 4403310 DORM Ibérica, S.. Camino San Martin de la Vega, 4 E8500 rganda del Rey (Madrid) Tel. +34 91 8757850 Fax +34 91 8757881 4 016 8395 Movable Walls France DORM France S..S. Zone Europarc Immeuble Mega 4 4, Rue Eugène Dupuis F94046 Créteil Cedex Tel. +33 1 4194400 Fax +33 1 4194401 UK/Ireland DORM UK Ltd. Wilbury Way Hitchin GHertfordshire SG4 0 Great ritain Tel. +44 146 477600 Fax +44 146 477601