INFORMATION BULLETIN NO: B-E

Similar documents
Date of Issue: September 14, 2017 NO: B-E REVISION: 07. This information bulletin supersedes Directive D-E issued April 14, 2006.

All electrical equipment shall be approved as per Rule and Appendix B note with the exception as per Rule

LOCATED. regulated. or in bulletin. Required. Actions. facility: the Safety Standards. during an appeal.


SAFETY ORDER THYSSENKRUPP NORTHERN ELEVATOR TRACTION SHEAVE BRAKE (SHEAVE JAMMER) MAINTENANCE NO: SO-ED Date of Issue: March 19, 2012

City of Los Angeles RECOGNIZED ELECTRICAL FIELD TESTING AGENCIES

TECHNICAL MANUAL for FIRE TAPE. E-Z TAPING SYSTEM PO BOX GREEN BAY, WI

COURSE SYLLABUS HVAC AND MECHANICAL CONSIDERATIONS FOR PART 3 BUILDINGS CORRESPONDENCE COURSE

OFFICE of the FIRE COMMISSIONER. Recreational Vehicles Life Safety Requirements

TECHNICAL MANUAL for FIRE TAPE. E-Z TAPING SYSTEM PO BOX GREEN BAY, WI

Overview of Standards for CO Detection Products

INFORMATION BULLETIN

EU Declaration of Conformity

Note: this SSB supersedes SSB#11/2001. Requests for related information may be addressed to

DIVISION LOW VOLTAGE DE-ICING / SNOW MELTING SYSTEM IN EXISTING ASPHALT/CONCRETE

Public Comment No. 23-NFPA [ Section No ] Statement of Problem and Substantiation for Public Comment Related Item

#2 Space heating with wood

EU Declaration of Conformity

A Guide to Safe Electronic Weighing in Hazardous Locations

Medina. Laminate Casegoods

LUMINARY EXECUTIVE EXECUTIVE SUITES ALSO OFFERED WITH A SELECTION OF PENINSULA DESKS TO PROMOTE COLLABORATION WITH TEAM MEMBERS.

Sizes. Colors. Features

CERTIFICATION BODY ACCREDITATION PROGRAM (CBAP) Scope of Accreditation

Date of Authorization JUNE 24, 2004 BMEC Authorization BMEC # AUTHORIZATION REPORT - SafeSIGN Photoluminescent EXIT Signs

PORTABLE FIRE EXTINGUISHERS

INVITATION TO TENDER ITT NO. PS KILLARNEY COMMUNITY CENTRE ENERGY UPGRADE ADDENDUM NO. 2

RECOMMENDED READING GUIDE FOR REFRIGERATION PLANT EXAMINATION CANDIDATES

Organization Summary and Directory. Standards Organization Summary and Directory Overview. Technical Information: Standards

STELLA Cert no. BV-COC

CURTIS-STRAUS LLC A BUREAU VERITAS COMPANY NRTL/SCC SOLUTION

ECLIPSE EXECUTIVE OFFICE

BLOCK F REZONING APPLICATION PACKAGE UNIVERSITY ENDOWMENT LANDS, VANCOUVER, BRITISH COLUMBIA

GAS SAFETY Information Bulletin

UNDERSTANDING ELECTRICAL SAFETY RISKS

FURNITURE LANDSCAPE IN CANADA APPROACHING THE CANADIAN FURNITURE MARKET

VERIFICATION OF FIRE ALARM SYSTEMS

PROCEDURES FOR APPROVAL OF LIFE-SAVING APPLIANCES AND FIRE SAFETY SYSTEMS, EQUIPMENT AND PRODUCTS

INSTALLATION AND OPERATING INSTRUCTIONS FOR Built-in units Blt-in-38, Blt-in-58, Blt-in-36 & Blt-in-62

RJC Engineers rjc.ca Vancouver Victoria Nanaimo Kelowna Calgary Edmonton Lethbridge Toronto Ottawa Kitchener Kingston

Technology Furniture

TECHNICAL DATA OBSOLETE

CHAPTER 5 REFERENCED STANDARDS. American Architectural Manufacturers Association 1827 Walden Office Square Suite 550 Schaumburg, IL

Safety Evaluation of Luminaires and Self Ballasted Lamps. 1

Certificate of Compliance

2018 CANENA AGM PROGRAM

12/21/2015 National Fire Protection Association Report

UL Health Sciences Industry Case Study: Skanray Technologies

VOLUNTARY PROCESSING STANDARD FOR RECYCLERS OF MAJOR APPLIANCES PS01

GUARDED STATUS INFORMATION and REQUIREMENTS For OWNERS AND OPERATORS Of REFRIGERATION PLANTS

Intrinsically Safe Transmitters, Option Code 2n

Can I install my stove using an existing masonry chimney?

Achieve Success with European Medical Device Commercialization. By Russ King

1.0 PLANNING MARKHAM S FUTURE CONTENTS

RENDERED TO Vipco Industries Inc th Avenue SE Calgary, AB T2C 0B3

GAS SAFETY REGULATION

Synopsis of 50 years of Planning in the Greater Golden Horseshoe (GGH), Ontario, Canada. Olusola Olufemi 2015

CANADIAN SOCIETY OF LANDSCAPE ARCHITECTS STRATEGIC PLAN 2012_14

Second Revision No. 3-NFPA [ Section No. 2.3 ]

Declaration of Conformity

Understanding Hazardous Locations Concepts

INSTALLATION & OPERATION MANUAL

Red Hill Valley Project More Than A Road October 16, 2006

City of Los Angeles RECOGNIZED ELECTRICAL TESTING LABORATORIES FOR LISTING OF ELECTRICAL EQUIPMENT

British Columbia Landscape Standard. Published by:

International Product Compliance and Certifications. Product Safety Consulting, Inc.

Certificate of Compliance

Auditing Association of Canada (AAC) Annual Conference North York, AMEC Environment & Infrastructure

Integration of Trees into Roads Policy - the road to success -

FROM: Acting General Manager, Planning and Development FILE:

Chubb Monitoring Solutions

DIESEL Engine Fire Pump Controllers Features

TECHNICAL MANUAL for FIRE TAPE. E-Z TAPING SYSTEM PO BOX GREEN BAY, WI

Legislation, Standards and Technology. Figure 1: 1897 Approved Electrical Fittings

Canada s Experiences: Thematic Session on Wood/Solid Fuel Residential Heating

Certificate of Compliance to IEC 61508

COPYRIGHT ULC STANDARDS

Performance Rating of Unit Ventilators

Edward R. Sajecki Commissioner of Planning and Building

Intrinsically Safe or Explosionproof? Understanding the technology

Siloxanes: Quantifying a New Emergent Pollutant in Water, Air and Soil

Annubar Flowmeter Series

First Revision No. 2-NFPA [ Global Input ] Submitter Information Verification. Committee Statement. 1 of 11 1/18/2016 5:43 PM

Effective Date: October Rev. 5/21/2018- Void After: October Product: Plumbing Fixture Fittings File No. 5840

Canadian White Book. p/1

National Fire Protection Association. 1 Batterymarch Park, Quincy, MA Phone: Fax:

HORIZON QUICK RESPONSE FLUSH PENDENT SPRINKLERS TECHNICAL DATA

Installation Instructions

Type 5 Certifications:

ELECTRICAL INSPECTION BULLETIN (Effective )

MOBILE FOOD SERVICE EQUIPMENT FIELD APPROVAL SUBMISSION INFORMATION

FREEDOM RESIDENTIAL CONCEALED PENDENT LEAD FREE SPRINKLER VK4570 (K4.9) TECHNICAL DATA

CANADIAN DAM ASSOCIATION ASSOCIATION CANADIENNE DES BARRAGES

Presentation Overview

Motion Controlled Apartment Building Corridor Lighting

Power over Ethernet cable Product standards and Installation code Updates. Julian Mereuta - June 1, 2017 Banff, Alberta

and Richmond Street West - Official Plan Amendment Application - Preliminary Report

STYLE. Desk-mounted hutches with elegant, radiused front doors preserve workspace and create privacy when used with optional tack panels.

Guide to Hazardous Location Approvals:

Study confirms cooking, smoking are top causes of house fires

Erik Leider Project Engineer Hazardous Locations, Gas & Oil Underwriters Laboratories

Transcription:

INFORMATION BULLETIN NO: B-E3 071019 3 APPROVED CERTIFICATION MARKS FOR ELECTRICAL PRODUCTS This information bulletin supersedes Directive D-E3 060414 1 issued April 14, 2006. Date of Issue: October 19, 2007 General Details Under section 21(1) of the Electrical Safety Regulation, electrical equipment must bear evidence of either a mark or a label of a certification agency accredited by the Standards Council of Canada or an approval label issued by the British Columbia Safety Authority under section 10 of the Safety Standards Act. This Bulletin specifies the certification/approval marks and labels that are acceptable in British Columbia. NOTE: The Standards Council of Canada accredits two types of organizations for electrical equipment approval. These organizations were formerly known as Certification Agencies and are now referred to as Certification Bodies (CB) and Inspection Bodies (IB). Details regarding this accreditation process can be found on the Standards Council of Canada website at www.scc.ca. Specific Details The following marks and labels applied to electrical equipment are acceptable evidence of approval within the province of British Columbia. CSA International (Also known as Canadian Standards Association) (CB, IB) 178 Rexdale Blvd. Toronto, Ontario M9W 1R3 Ph: (416) 747-2515 Fax: (416) 401-6700 http://www.csa-international.org British Columbia Office: 13799 Commerce Pkwy Richmond, BC V6V 2N9 (604) 273-4581 B-E3 071019 3 Page 1 of 12

C US CSA Field Certification Labels CSA Gas Certification Labels CSA SI Gas Label CSA SI Health Care SI Model Code B-E3 071019 3 Page 2 of 12

British Columbia Safety Authority Suite 400-88 6th Street New Westminster, BC V3L 5B3 Canada www.safetyauthority.ca email: info@safetyauthority.ca Toll free: 1-866-566-SAFE (7233) Ph: (604) 660-6286 Fax: (604) 660-6215 Electrical Safety Authority (ESA) (IB) Field Evaluation Services Group 1 Terence Matthews Cres. Suite 130 Ottawa, Ontario K2M 2G3 1-800-559-5356 http://esapa.biz For use on all electrical equipment covered by the accreditation For use on panels only B-E3 071019 3 Page 3 of 12

FM Approvals LLC (CB) 1151 Boston-Providence Turnpike P.O. Box 9102 Norwood, MA 02062 USA Ph: 781-255-4972 Fax: 781-792-9375 http://www/fmglobal.com Intertek Testing Services - ETL / Warnock Hersey (CB, IB) 165 Main Street Cortland, New York 13045 Ph: 607-758-6296 http://www.intertek-etlsemko.com/ Local BC Contact Information Intertek Testing Services - ETL / Warnock Hersey 1500 Brigantine Drive Coquitlam, BC V3K 7C1 Ph: 604-520-3321 CERTIFICATION MARKS B-E3 071019 3 Page 4 of 12

SI LABELS LabTest Certification Inc. (CB) 3133-20800 Westminster Highway Richmond, B.C. V6V 2W3 http://www.labtestcert.com/services/ Contact information: Josef Otto, P. Eng., Certification Manager 604 247 0444 (office) 604 247 0442 (fax) 604 561 9712 (cell) jotto@labtestcert.com B-E3 071019 3 Page 5 of 12

MET Laboratories Inc. (CB, IB) 914 West Patapsco Avenue Baltimore, MD 21230-3432 USA Ph: 410-354-3300 Fax: 410-354-3313 http://www.metlabs.com NSF International (CB) 789 Dixboro Road Ann Arbor, MI 48105 USA Ph: 734-769-5143 Fax: 734-827-6840 http://www.nsf.org B-E3 071019 3 Page 6 of 12

OMNI-Test Laboratories, Inc. (CB) 5465 SW Western Avenue, Suite G Beaverton, OR 97005 Ph: 503-643-3788 Fax: 503-643-3799 http://www.omni-test.com Quality Auditing Institute (CB) 2825 Murray Street Port Moody, British Columbia V3H 1X3 Canada Ph: 604-461-8378 Fax: 604-461-8377 Web: www.qai.org B-E3 071019 3 Page 7 of 12

QPS Evaluation Services Inc. (QPS) (CB, IB) http://www.qps.ca Head Office: 81 Kelfield St., Unit 8 Toronto, ON M9W 5A3 Ph: 1-877-746-4777 Fax: 416-241-0682 Email: info@qps.ca B.C Office: 3173-45 th Ave.E. Vancouver, BC V5R 3E2 Phone: 604-760-9330 Fax: 604-438-8878 Email: smah@qps.ca Certification Marks Certification Labels Field Evaluation Label Field Evaluation Label Health Care Equipment B-E3 071019 3 Page 8 of 12

TÜV America, Inc. (CB, IB) (Product Service Division) 5 Cherry Hill Drive Danvers, MA 01923 U.S.A. Ph: 978-739-7000 Fax: 978-777-8441 Web Site: http://www.tuvamerica.com Underwriters Laboratories of Canada (CB, IB) 7 Underwriters Road Toronto Ontario M1R 3B4 http://www.ulc.ca British Columbia Contact information: 130-13775 Commerce Pkwy Richmond, BC V6Y 1X9 Ph: (604) 214-9555 Fax: (604) 214-9550 Ph: 250-598-1286 Fax: 250-598-1289 B-E3 071019 3 Page 9 of 12

Underwriters Laboratories Inc (CB, IB) 333 Pfingsten Road Northbrook, IL 60062-2096 USA http://www.ul.com British Columbia Contact information: 130-13775 Commerce Pkwy Richmond, BC V6Y 1X9 Ph: (604) 214-9555 Fax: (604) 214-9550 Ph: 250-598-1286 Fax: 250-598-1289 Stephen Hinde Provincial Safety Manager - Electrical B-E3 071019 3 Page 10 of 12

Relevant Legislation Safety Standards Act Definitions 1 In this Act: "certification agency" means a person or class of persons designated by the regulations as a certification agency; "certification mark" means a stamp, mark, seal, label, tag or other identification of a certification agency certifying that the regulated product to which it is affixed or attached or in which it is embedded meets the standard that the product must meet for that certification; Provincial safety manager may approve regulated products for use 10 (1) Every provincial safety manager, other than the registrar, may approve regulated products in accordance with the regulations for use in British Columbia even if there is no certification mark present on the regulated product. (2) If a provincial safety manager approves a product for use under subsection (1), the provincial safety manager may attach an approval mark that is readily identifiable as an approval mark or if it is impracticable to attach an approval mark, may order that notice of the product approval accompany the regulated product or be posted where the regulated product is to be used or installed. Electrical Safety Regulation Certification agencies 20.1 An organization accredited by the Standards Council of Canada under the Standards Council of Canada Act as an organization engaged in conformity assessment is a certification agency for the purposes of this regulation. Certification or approval mark required for electrical equipment 21 (1) Subject to subsections (3) and (4), a person must not use electrical equipment in British Columbia, or offer for sale, sell, display or otherwise dispose of electrical equipment for use in British Columbia, unless the electrical equipment displays a label or mark as follows: (a) a certification mark; (b) a label or mark of a certification agency that is acceptable to the appropriate provincial safety manager to certify electrical equipment for a specific installation; B-E3 071019 3 Page 11 of 12

(c) an approval mark issued under section 10 of the Act; (d) in the case of used manufactured homes, used factory-built structures and used recreational vehicles, a label supplied by the appropriate provincial safety manager. (2) An approval mark under subsection (1) (c) signifies compliance with requirements in respect of fire and electrical shock hazards only. (3) Electrical equipment that does not require approval under the B.C. Electrical Code does not require a label or mark. (4) Electrical equipment that has not been approved under subsection (1) may (a) be displayed for not more than 14 days if the regulatory authority gives written permission to do so, or (b) be used by a utility in its capacity as a utility if a professional engineer has certified that the use of the equipment is safe. For more information on the British Columbia Safety Authority, please visit our web site at: www.safetyauthority.ca B-E3 071019 3 Page 12 of 12