To: TSSA From: Janet Townsend Company: Danfoss A/S Kolding factory Phone: 416-747-4291 Pages: 7 Location: Toronto Our File: ANR-3091 Date: April 29, 2014 Your File: 0C16578.56ADD1 Subject: Request for Design Registration Dear Ms. Francis, CSA has reviewed the documentation submitted by TSSA on behalf of Danfoss A/S Kolding factory. These fittings have been registered by CSA for the Province of Québec. In accordance with an agreement between CSA, the Provinc ces of Québec and Saskatchewan; this registration is recognized by Quebec and Saskatchewan. These fittings are acceptable for use in these Provinces. The letters CSA will be applied as a prefix to the CRN indicate which fittings have been registered in this manner. A copy of the stamped Statutory Declaration is attached. The CRN is CSA-0C16578.56ADD1 1. The cost for this service is $ 760.000 plus HST. A copy of the Statutory Declaration with an original stamp affixed will be forwarded to you along with our invoice by regular mail. Yours truly Janet Townsend Account Manager CSA Group janet.townsend@csagroup.org www.csagroup.org
TECHNICAL STANDARDS & SAFETY AUTHORITY 14th Floor, Centre Tower 3300 Bloor Street West Toronto, Ontario Canada M8X 2X4 Show facsimile of manufacturer's logo or trademark, as it will appear on the fitting, in the space below STATUTORY DECLARATION Registration of Fittings I, Claus Juhl, Director Engineering (Name and Position, e.g. President, Plant Manager, Chief Engineer) of Locatedat Danfoss A/S Kolding factory (Name of Manufacturer) Albuen 29, OK 6000 Kolding +45 74887916 +4586280802 (Plant Address) (Telephone No.) (Fax No.) do solemnly declare that the fittings listed hereunder, which are subject to the Technical Standards and Safety Act, Boilers and Pressure Vessels Regulation, comply with all of the requirements of 1 (Title of recognized North American Standard) which specifies the dimensions, materials of construction, pressure/temperature ratings, identification marking the fittings and service; or are not covered by the provisions of a recognized North American standard and are therefore manufactured to comply with ANSI 16.34, EN 12284 and others as supported by the attached data which identifies the dimensions, material of construction, pressure/temperature ratings and the basis for such ratings, the marking of the fitting for identification and service. I further declare that the manufacture of these fittings is controlled by a quality system meeting the requirements of ISO 9001:2008 ISOTTS 16949 which has been verified by the following authority, BUREAU VERITAS. The items covered by this declaration, for which I seek registiation, are category C type fittings. In support of this application, the following information and/or test data are attached as follows: Document file including drawings, material describtion and pressure test reports for valve Type: KDC, MWP 52 bar, DN 65 la (drawings, calculations, test worts, etc.) Declared before me at in the of the day of AD 20 Commissioner for Oaths: (Printed name) (Signature) FOR OFFICE USE ONLY To the best of my knowledge and belief, the application meets the requirements of the Technical Standards and Safety Act, Boilers and Pressure Vessels Regulation, and GSA Standard B51 and is accepted for registration in Category C.,... Of-e. /Zee (Signe ure of Declarer) -,, us... at',...- w4, N ' td CSA INTERNATIONAL REGISTERED CRN: CM - 00(05 7q.56ADDi C.R.N.- CS/ -0C.- /657g 056/ 1)P Registered by: p. 80m)o4---F Signed: ", Dated: Ap ( 1 i on,,q011-1 Date. A..p r.1 1 d'r._ i._,a111-1 _....Trin /5, 00aq 178 Rexdale Blvd., Toronto, ON M9W 1R3, NOTE: This registration expires on: *Note: ADD1 Scope is addition of KDC Valve Series. MAWP 52 Bar. CAk!fi - '
This is to certify that Claus Jubl today in my presence at the Notarial Office approved and signed the above document. No conspicuous corrections or addenda were found in the document. Claus Juhl has proved his identity by showing passport. lib. 4 Per e St Notary Public rt in Kolding, Denmark, 2014.02.24
CANADIAN STANDARDS ASSOCIATION ATTACHMENT TO CRN CM--oc 165 7,5GAPO_i SIGNED Scope for CRN approval of Danfoss KDC valve Date 2014:02.28 178 Rexdale Boulevard, Toronto, ON Canada M9W 1R3 Danfoss NS at the division Automatic controls in Kolding Denmark are producing Multifunctional Compressor Valves. The basic models are the GVD/KDC valves in the range of DN 65 to DN 200, designed with a maximum working pressure of 40 bar. This product range do have the registration in Canada under the CRN 0C15854.5 This new application covers a KCD valve, with same basic design but optimized to work with a maximum working pressure of 52 bar. Scope for this new application are the registration of the following valves. Type: Size: MAPW (bar) KDC DN 65 52 bar KDC DN 80 52 bar KDC DN100 52 bar KDC DN125 52 bar KDC DN150 52 bar KDC DN200 52 bar. Additional refrigeration valves, in same product family, designed and produced At Danfoss A/S Kolding, do have the CRN registration number: 0C16578.5. Of this reason we would prefer to add this above mentionecleprodt&to this CRN 0C16578.5. Danfoss A/S Sernior approval consultant fr,-/ Eigil Hansen 0 lie5/g6pipt 010, \Jesse:. 1 \(00.05132,ktki 50:118C5g/-9Tes.skite SOly A 9 1 111 61 114,
Certificate of Approval Awarded to Dan foss A/S Automatic Controls, Kolding. Albuen 29 6000-KoIding-Denmark Bureau Veritas Certification certify that the Quality Management System of the above organisation has been audited and found to be in accordance with the requirements of ISO/TS-16949:2009 - Third edition_ and die applicable customer specific requirements SCOPE Design, development and manufacturing pram:111,ed aliclusron(s) None PRODUCT(S) DELINTEREID Valves, controls and components for Refrigeration and Air Conditioning rbeee-artriadaw 20 June 2013 BIlICtlf L'erittis Cea127iarlidll OtigTsrttl apn,sril e: Dar el.25/rdriox 19 June 2016 M/FcatifreateN : 165274 &nom vuirarodifireincenricart -DEN-11587/1-TS _. P. v.air.n..iidiri &CM.. io 422,1314.14Cii.4.I.1e-Araue.dadit doese la ;is 4ii A athii k faissl.rotrm ily)
Name and address Of bearer: Tested according to 971231E0: Test report No.: Range of products: Places of manufacture: CERTIFICATE Quality system according to directive 97123IEC Certificate No:: 07,2021321 Z 0033/13/D/01 Danfoss -1644:440-46irigeration Albueb 29...- 1 1C,43000. 1i44419 We hereby certify that the nitartufketaref bet-iiktlib.baci a quality.pyoterri 'for the manufacturing of pressure equipment ileabrclh=fito'clactiv-e 9:77-23/EC: Ttie.apariufe-Cturerls entille-1;to mark the ptesture equiptnefit produced Within the range follovill mark: CE 0045 production quality assurance (module Di/D) 1321 P 0033/13/D/01 Control-, solenoid-, manual- and safety valves for industrial refrigeration (see enclosed list) Danfoss NS, Danfoss Industrial Refrigeration, Albuen 29, 66004:(Oldingt Danmark DenfObs (Tianjin) Ltd, Production Plant (WuciIng), No.9 QUanhul,Rliati?"-WlitlIFI.1:10.!e1615rnent Area, 301700 Tianjin, China valid until: 3om-setsiolp.**1e Harnbttrg, 13. September 2013 Zertifl telle Rh' Druo -:NORD Systems bh & Co. KG A valtf t, D lirtion Body EC-Reg No 0046 TOV NORD Systems GmbH & Co. KG Tel. +4940)40 8557-2706 Grofle Bahnstr, 31 Fax +4940)40 8557-2187 0-22525 Hamburg e-mail kornottlev-nottl.dtt Germany Member of CEOC ccirotehvecvetileficareamatthansmeormlate latecksmdestpolw..smir.clos