SENTIENT BLIND AFTER BEAT
SENTIENT BLIND AFTER BEAT Combination of three materials: aluminum, wood and fabric, adds harmony and distinction to your personal space. release of Eco Natural Series Thermal barrier coating slat realizes eco-friendly with design The thermal barrier coating slat as Eco Natural Series has excellent heat shielding. Since it reflects strong sunlight more effectively than general slats, it increases the cooling efficiency for air conditioner. So it s eco-friendly and Money wise. Furthermore, two-tone design slat can be enjoyed two difference colors in one unit. General slat In the case of sand gray: The reflection ratio is about 2.5 times higher The temperature of the blind is -3.7 Thermal barrier coating slat Reduce air conditioning load by preventing the rise of room temperature! Performance of Infrared Reflection Ratio Name Infrared Reflection Ratio Type Pure white Sand gray General slat Eco natural color (Thermal barrier coating slat) 72.4% 73.0% 29.1% 71.6% In the case of sand gray Reflection ratio (%) Infrared reflection ratio (%) Thermal barrier coating slat General slat Little reflection Significant reflection An earth-friendly and comfortable office! Infrared territory Wave length (nm) release of water-resistant AFTER BEAT Aqua Suitable for use in the place with moisture Ten items centering on the popular grain pattern can be enjoyed in the kitchen, bathroom and other place with moisture. Enabling luxurious moments of resort-like relaxation in everyday space. Side Switch-Over Function has been added to the Loop type. When you wish to change the operation position due to room rearrangements, etc., you can switch over from left to right or vice-versa easily without using a tool. Side Switch-Over Function convenient for rearranging rooms released! Side switch-over is possible without using a tool. The operability and available sizes of the Loop type have been significantly improved. Loop Type suitable for large windows. the operational load reduced by about % compared to conventional company products, operation has been made easier than before. In addition, the available sizes have been extended to the maximum area of 7.0m 2 from the previous 6.0m 2! Operation power reduced by % (Compared to conventional company products) Height Adjustment Function Perfectly adjustable to window frames or floors The height of blinds after installation can now be easily adjusted (up to approximately mm). This function is standard for all types of AFTER BEAT. This enables the blinds to accurately fit inside a window frame, thus resolving the issue of the unpleasant sound of blinds hitting the window frame. Industry s First <Ladder Cord Specification> <Ladder Tape Specification> The height can be adjusted The height can be adjusted with a coin or flat-braid without using a tool. screwdriver.
PRODUCT TYPE & SPECIFICATION Width Ladder Specifications AFTER BEAT Pole type Narrow slats are recommended for small windows and tall windows. : mm AFTER BEAT AFTER BEAT Wide slats are recommended for terrace windows. AFTER BEAT : mm AFTER BEAT Ladder Cord Specifications *Also applicable for specifications} *Also applicable for specifications} *Also applicable for specifications} AFTER BEAT R Pole type AFTER BEAT R AFTER BEAT R AFTER BEAT R AFTER BEAT R Ladder Tape Specifications *Also applicable for specifications} *Also applicable for specifications} *Also applicable for specifications} Available sizes Product Product height Max. area 3~2000mm 0~20mm 4.0m 2 4~2400mm 0~00mm 4.0m 2 4~2400mm 0~00mm 7.0m 2 4~2400mm 0~00mm 4.0m 2 4~2400mm 0~00 (20) mm 7.0 (6.0) m 2 AB-7101 (Frost white) and AB-7102 (Frost brown) are only available for slats mm in and are not applicable for mm product types. In the cases of the Loop type with a product of 570mm or less, available product heights are 20mm or less. are applicable for Pole types and Cord types. Type of Operation Pole Type Cord Type Loop Cord Type *Also applicable for specifications} Specially for AB or R *Also applicable for specifications} For All Items For All Items Type of Valance (Optional) Natural Wood Valance 21 colors in 3 styles metal line Step style Modern Valance 10 colors in 3 series {Only applicable for Valance Set} Silver Brown
STRUCTURE & PART NAME AFTER BEAT [Pole type] AFTER BEAT R [Pole type] out 63 88 67 out 63 88 67 43.5 43.5 and Mounting Bracket Stainless alloy, : Clear Bottom Rail Basswood 19 colors in total Head Rail 13 colors similar to Bottom Rail Head Rail Cap 13 colors similar to Head Box Bottom Rail Plate 13 colors similar to Bottom Rail Safety Joint Milky white 40 colors Bracket Cap 13 colors similar to Head Box Holder 26 colors similar to slat color Tape Holder 13 colors similar to Bottom Rail Tassel Basswood 17 colors similar to Bottom Rail Tilt Pole Basswood 17 colors similar to Bottom Rail Ladder Cord 13 colors similar to slat color Ladder Tape 26 colors Lift Cord 13 colors similar to slat color Bottom Holder 13 colors similar to Bottom Rail Valance Holder Clear Natural Wood Valance Valance Mounting Bracket Modern Valance Basswood Steel plate press molding 19 colors identical to Bottom Rail 2 colors of silver and brown 10 colors
(Unit: mm) AFTER BEAT / AFTER BEAT R / R out out () () () () () () and Mounting Bracket Stainless alloy, : Clear Ladder Tape 26 colors Head Rail 13 colors similar to Bottom Rail Head Rail Cap 13 colors similar to Head Box Lift Cord 13 colors similar to color Bottom Rail Basswood 19 colors in total Extruded plastic : 40 colors Extruded plastic: 2 colors (plastic is only mm) Bottom Plate 13 colors similar to Bottom Rail Safety Joint Milky white Holder 26 colors similar to color Bracket Cap 13 colors similar to Head Box Opening / Closing Cord 13 colors similar to color Tape Holder 13 colors similar to Bottom Rail Level Tassel Basswood 17 colors similar to Bottom Rail Tilt Tassel Basswood 17 colors similar to Bottom Rail Lift Tassel Basswood 17 colors similar to Bottom Rail Ladder Cord 13 colors similar to color Bottom Holder 13 colors similar to Bottom Rail Valance Holder Clear Natural Basswood Wood Valance Modern Valance 19 colors identical to Bottom Rail 2 colors of silver and brown 10 colors
STRUCTURE & PART NAME AFTER BEAT / AFTER BEAT R / R out 80.4 out 80.4 75 75 () () () () () () () and Mounting Bracket Stainless alloy, : Clear Lift Cord 13 colors similar to slat color Head Rail 13 colors similar to Bottom Rail Bottom Rail Basswood 19 colors Head Rail Cap 13 colors similar to Head Box Bottom Plate 13 colors similar to Bottom Rail Operation Pulley, etc. 13 colors similar to Head Box Bracket Cap 13 colors similar to Head Box Extruded plastic : 40 colors Extruded plastic: 2 colors (plastic is only mm) Tape Holder Bottom Holder 13 colors similar to Bottom Rail 13 colors identical to Bottom Rail Holder 26 colors similar to slat color Valance Holder Clear Operation Cord Ladder Cord 13 colors similar to slat color 13 colors similar to slat color Natural Wood Valance Basswood lumber Metal line part: Aluminum extrusion 19 colors identical to Bottom Rail Metal Line portion 2 colors of silver and brown Ladder Tape 26 colors Modern Valance Aluminum extrusion 10 colors
(Unit: mm) Bracket Specification Pole Type Cord Type/Loop Type 18.3 3.8 2.1 21 20.7 5 2.1 4.2 4.2 4.2 31.5 15.5 4.2 20.4 2.1 6.5 mounted to the ceiling, a bracket cap of a similar color to the head box is attached. mounted to the wall, a bracket cap is not attached. 4 13 20 2.1 4.2 4.2 2.1 9 2.1 mounted to the ceiling, a bracket cap of a similar color to the head box is attached. mounted to the wall, a bracket cap is not attached. Product Width Number of Brackets Product Width Number of Brackets 3~10mm 2 4~18mm 2 10~2000mm 3 1840~2400mm 3 Valance Specification L Type for /R//R [Pole/Cord/Loop type] S Type for /R [Pole type] Natural Wood Valance 70 11mm Natural Wood Valance 37 7.5mm metal line 70 91 12.5mm metal line 37 48 9mm Step style 11mm Step style 27 9mm Modern Valance 70 11mm Product Weight Head Box Portion + Bottom Rail Valance (wooden) /R [Pole type] Product (Product (m) x (m) x 0.8) + (Product (m) x 0.15) [kg] Product /R [Cord type/loop type] Product (Product (m) x (m) x 0.8) + (Product (m) x 0.15) [kg] Product /R Cord type / Loop type [ ] Aluminum AB-7001~7010 AB-7103~7406 AB-7101~7102 Product (Product (m) x (m) x 0.8) + (Product (m) x 0.3) [kg] (Product (m) x (m) x 1.0) + (Product (m) x 0.3) [kg] Product