Raytheon Anschütz GmbH Postfach 1166 D - 24100 Kiel Tel+49-431-3019-0 Fax+49-431-3019-501 Email Service@raykiel.com www.raytheon -anschuetz.de NAUTOCONNING (Ethernet) BOX -PC System Description 4093.DOC000002
Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhaltes nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Toute communication ou reproduction de ce document, toute exploitation ou communication de son contenu sont interdites, sauf autorisation expresse. Tout manquement à cette règle est illicite et expose son auteur au versement de dommages et intérêts. Copying of this document, and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. Sin nuestra expresa autorización, queda terminantemente prohibida la reproducción total o parcial de este documento, así como su uso indebido y/o su exhibición o comunicación a terceros. De los infractores se exigirá el correspondiente resarcimiento de daños y perjuicios.
R Raytheon Anschütz GmbH SAFETY NOTES: S Warning! Take care during maintenance and repair work: avoid touching live electrical connections. The applicable safety regulations such as VDE, VBG 4, OSHA 1919 and other appropriate safety standards must be followed. S The installation and first putting into operation may only be performed by trained and qualified personnel. S Maintenance and repair work may only be performed by trained and qualified personnel having knowledge of the national safety regulations for this type of equipment. S The equipment can be damaged! Parts may only be replaced when the supply voltage is switched off. A 4093DOC000002
4093DOC000002 B
R Raytheon Anschütz GmbH Table of Contents 1 General... 1-1 1.1 Tasks and Performance features... 1--2 1.2 Construction... 1--4 Diagrams: See Cable Diagrams and Connecting Diagrams (according to order) Additional Descriptions: Navigation Data Manager Conning Display Alarm Transfer System 3884E 4094E 4095E Computer 4090E I 3885DOC000002
R Raytheon Anschütz GmbH 1 General NAUTOCONNING is the central display and data management system for the ship s command. Allying with Radar and ECDIS (Electronic See Chart) NAUTOCONNING can be placed in a Multifunction Console (MFC). The switching over between these applications taks place with a software switch (MFC Switch) placed on the top corner right of the display. 1--1 4093DOC000002
1.1 Tasks and Performance features Read in and adaption of Navigation Data - Log - NavRec - Wind - Depth - etc. Read in and adaptation of Sensor Data - Compass - Autopilot - ECDIS - etc. Sensor Monitoring The Nautoconning software allows specific Alarm Level Settings for sensors which will release alarms on Alarm Transfer System ATS. Sensor Selecting Redundant sensors can be selected from a scrollable list which indicates all sensors and their current status. Registration and management of alarms and the status of system devices Built--in Watch Alarm Timer, configurable for W1--applications (Function of Alarm Transfer System Conning Display) Redundant Central Alarm Panel functionality for W1--applications 4093DOC000002 1--2
R Raytheon Anschütz GmbH Display of the registered data, alarms and procedure sequences (tracking) in corresponding monitor displays: - NAVIGATION - DOCKING - SENSOR - ALARM - ONDUTY - RECORD Distribution of the data and alarms to connected devices. 1--3 4093DOC000002
1.2 Construction (see Figure: 1--1) NAUTOCONNING is constructed modularly and can be adapted to the particular tasks of different types of vessels. This applies to interfaces to other equipment, sensors and to screen displays. NAUTOCONNING basically consists of Computer (see attached description no. 4090) Navigation Data Manager (see attached description no. 3884) Conning Display (see attached description 4094) The NAUTOCONNING--,ECDIS-- and RADAR--Application can be used in one console or computer. These option is called Multifunction Console MFC. As an option an Alarm Transfer System can be added (see attached description no. 4095). An Alarmmanager enables NAUTOCONNING to integrate an Watch Alarm System with Alarm Transfer System and Central Alarm Panel acc. to DNV. The Ethernet Switch is used as Data Distribution for the NAUTOCONNING Ethernet System. 4093DOC000002 1--4
R Raytheon Anschütz GmbH CENTRAL BRIDGE PLACE NAUTOCONNING DISPLAY ALARM PANEL used as CENTRAL ALARM PANEL Computer ALARM PANEL MFC *) NAVIGATION DATA MANAGER NMEA SENSORS or ETHERNET SWITCH ALARM TRANSFER SYSTEM NAVIGATIONAL SOURCES (e.g.) GL ONASS WIND GPS 1 GPS 2 ECHOSOUNDER GYRO LOG IR--NAV IR--TRACK AUTOPILOT NP20xx AIS ECDIS RADAR FC--NAV FC--TRACK VDR ALARM SOURCES RADAR ECDIS AUTOPILOT GYRO COMPASS CONNING ALARM NMEA ANALOG CONVERTER *) Multifunction Console Figure: 1--1 NAUTOCONNING SYSTEM (Overview) 1--5 4093DOC000002
4093DOC000002 1--6