BILL 1 GROUND FLOOR Supply, Deliver, Install, Set to Work and Commission the Following: 1.01 Lighting point completely wired in 3x1.5mm² single core PVC insulated copper cables drawn in 20mm diameter HG PVC conduits including all accessories but excluding the switch and luminaire for; (i) One way switching 155 (ii) Two way switching 70 (iii) Photocell switching 3 1.02 10Amps, moulded plate in ivory white colour as MK or approved equivalent as follows: (i) 10A one gang one way switch 24 (ii) 10A two gang one way switch 4 (iii) 10A one gang two way switch 8 (iv) 10A two gang two way switch 4 (v) 10A three gang two way switch 6 (vi) 10A five gang two way switch 3 Lighting fittings complete with lamps of appropriate wattage and colour rendering and fixing materials as follows: 1.03 10W LED Ceiling club circular luminaire with silver cover as illumat Cat ILMLED-10-DL-S type 'C' 28 1.04 600mm x600mm, recessed module LED luminaire panel as Massive or equal & approved equivalent type '4x18' 1.05 Surface mounted down-light with circular opal diffuser & white stand off ring with intergral HPF control gear for 16W 2D compact lamps as Thorn Glorie or equal & approved equivalent type ''D''. 1.06 Recessed horizontal low energy downlight white finish with die cast aluminium ring and tempered protection glass, and to be complete with 2x18W PL lamp as Micromark MM6363 type 'E' 1.07 Self -contained single sided LED exit sign with for nonmaintained emergency lighting for 3 hour duration as Thorn or approved equivalent. 1.08 1 x 36W, 1200mm HPF bare batten fluorescent fitting as Thorn Popular Pack range or equal and approved equivalent type '4' 28 14 24 5 Mecoy Consultants Ltd H-6
1.09 450mm, 18W Mirror strip luminaire complete with diffuser as Thorn Arrowslim type ''e'' 4 1.10 1 x 36W, 1200mm Surface mounted mirror strip HPF water proof 1P65 fluorescent fitting with diffuser as Thorn or equal and approved equivalent type "4M". 1.11 2 x 18W, 1200mm T8 recessed modular luminaire complete with tubes and with opal white diffuser as Thorn/Liper or approved equivalent type "4L". 1.12 Small recessed LED downlighter fitting at the main Reception Area as Liper LP-COB20B DL or equal and approved equivalent type 'S' 1.13 Recessed LED downlighter fitting at the main Reception Area as Liper LPDL-30A-Y-30W DL or equal and approved equivalent type 'J' 1.14 Surface mounted bulkhead fitting with die cast aluminium body and opal polycarbonate diffuser,ip 65, round/oval shape with grille for 2 x 9 watts PL lamps as Thorn Roller or equal & approved equivalent type ''W'' 8 40 24 20 1 1.15 IP 65 50W Led floodlight as thorn or equal and approved equivalent 1 External Security Lighting: 1.16 Bulkhead fitting with aluminium alloy body and polycarbonate diffuser for 2 x 9 watts PL lamps as Massive Boston or equal & approved equivalent type ''G'' 1.17 20A 240V 3P contactor for switching external lights as TELEMECANIQUE complete with housing and all accessories. 1.18 A photocell unit to fit 70-75 Lux switch on level and 1.5 Maximum differential and wired to energize the contactors complete with a D.P override switch as Thorn QPK 3 3 3 POWER POINTS AND ACCESSORIES 1.19 13A SP raw power socket point completely wired in 3x2.5mm² single core PVC insulated copper cables drawn in 20mm diameter HG PVC conduits including all accessories but excluding the switched socket outlet 20 1.20 13A SP raw power socket point completely wired in 3x2.5mm² single core PVC insulated copper cables drawn in trunking. Allow for cables only. 9 1.21 13A moulded socket outlet plate as MK/Crabtree ranges or approved equivalent as follows:- (i) Twin switched 11 Mecoy Consultants Ltd H-7
1.22 13A SP metalclad socket outlet plate as MEM/MK/Crabtree ranges or approved equivalent as follows:- (i) Twin switched 1 1.23 250mm x 50mm deep three compartment metal trunking constructed from heavy gauge powder coated steel, and shall be complete with all accessories for coupling and earthing but excluding trunking accessories. 160 Lm 1.24 Trunking accessories comprising of ; i. End caps 1 ii. Corner bends 1 iii. Tee joints 1 iv. Mounting plates for 13A SP sockets and telephone sockets. 9 1.25 32mm diameter heavy gauge PVC conduits interlinking the trunkings. 1.26 Floor mounted floor boxes for workstations capable of accomodating 4 Data/Telephone points & 4 Twin switched socket outlet points fabricated and finished to engineers specifications. 1.27 Hand drier power point completely wired in 3x2.5mm² single core PVC insulated copper cables drawn in 25mm diameter HG PVC conduits including all accessories but excluding the 20A DP fused switched connection unit. 1.28 Extract Fan power point completely wired in 3x4mm² single core PVC insulated copper cables drawn in 25mm diameter HG PVC conduits including all accessories for the air extract fan but excluding the 20A DP switched connection unit. 1.29 20A DP fused switched connection unit complete with neon indicator as MK for Hand drier/fan. 1.30 Air conditioner power point completely wired in 3x4mm² single core PVC insulated copper cables drawn in 25mm diameter HG PVC conduits including all accessories but excluding the 20A DP fused switched connection unit. 1.31 20A DP fused switched connection unit complete with neon indicator as MK and marked "AC". 1.32 Water booster pump power point completely wired in 3x4mm² single core PVC insulated copper cables drawn in 20mm diameter HG PVC conduits including all accessories but excluding the 20A DP fused switched connection unit. 1.33 Fire pump power point completely wired in 5x6mm² single core PVC insulated copper cables drawn in 32mm diameter HG PVC conduits including all accessories but excluding the 50A TP Isolator 60 Lm 4 6 3 9 4 4 1 1 Mecoy Consultants Ltd H-8
1.34 20A DP fused switched connection unit complete with neon indicator as MK. 1 1.35 50A TP&N Isolator switch for the Fire Pump as MK 1 1.36 WHB/Urinal sensor control point comprising of wiring in 3x2.5mm² single core PVC insulated copper cables drawn in 20mm diameter HG PVC conduits and blanking plate 1.37 Three phase industrial socket outlet point completely wired in 5x6mm² single core PVC insulated copper cables drawn in 32mm diameter HG PVC conduits including all accessories but excluding the industrial socket 1.38 32A, TPN+E surface mounted interlocked switched 3phase socket outlet and complete with plug as MK/MEM/Crabtree or any other approved equivalent 1.39 Three phase industrial socket outlet point completely wired in 5x4mm² single core PVC insulated copper cables drawn in 32mm diameter HG PVC conduits including all accessories but excluding the industrial socket 1.40 20A, TPN+E surface mounted interlocked switched 3phase socket outlet and complete with plug as MK/MEM/Crabtree or any other approved equivalent 1.41 Single phase industrial socket outlet point completely wired in 3x4mm² single core PVC insulated copper cables drawn in 25mm diameter HG PVC conduits including all accessories but excluding the industrial socket 1.42 20A, SPN+E surface mounted interlocked switched single phase socket outlet and complete with plug as MK/MEM/Crabtree or any other approved equivalent 1.43 Three isolator outlet point completely wired in 5x16mm² single core PVC insulated copper cables drawn in 32mm diameter HG PVC conduits including all accessories but excluding the industrial socket 1.44 63A TP&N Isolator switch as MK or any other approved equivalent 1 3 3 3 3 6 6 FIRE DETECTION & ALARM SYSTEM 1.45 Fire Alarm points comprising wiring in 1.5mm 2 heat resistant cables drawn in 20mmØ concealed HG PVC conduits 1.46 Addressable Photoelectric Smoke Detector as Menvier or approved equivalent 38 2 Mecoy Consultants Ltd H-9
1.47 Addressable Heat Detector as Menvier or approved equivalent 1.48 Addressable Manual Fire Alarm 'Break Glass' call points as MENVIER or approved equivalent. 1.49 Addressable Electronic Fire Alarm sounder complete with Red Flashing beacon as MENVIER or approved equivalent. 6 5 5 1.50 Ditto as above but for outdoor use 1 1.51 2 Loop Addressable Microprocessor based Addressable Fire Alarm Control Panel as Menvier or approved equivalent 1 DATA AND TELEVISION OUTLET POINT 1.52 Data/Voice outlet point comprising a draw wire drawn into 25mm Ø full length heavy gauge plastic conduits cast in floor slab and concealed in the walls but without the outlet plate 1.53 Television outlet point complete with 75 Ohms screened aerial cable drawn in 20mm diameter heavy gauge PVC conduits including all accessories but excluding the television outlet plate 1.54 Television BNC Coaxial outlet plate as MK/Crabtree or any other approved equivalent 8 4 4 LV SWITCHBOARD, DISTRIBUTION BOARDS AND SUBMAINS POWER SUPPLY CABLES 1.55 12-ways TP&N Distribution Boards 200Amps rating, MCB, flush mounted, metal cased unit complete with 200Amps TP&N integral mccb and with "front hinged lockable metal cover and glanding chamber to suit as Schneider Electric or approved equivalent. 3 1.56 Sub-mains cables consisting of 4C 35mm2, PVC/SWA/PVC CU cables from the Lv switchboard to the distribution boards "A & B" above drawn in 50mm diameter full length heavy gauge PVC conduits cast in floor slab and concealed in the walls. 80 Lm 1.57 Sub-mains cables consisting of 4C 50mm2, PVC/SWA/PVC CU cables from the Lv switchboard to the distribution boards "C" above drawn in 50mm diameter full length heavy gauge PVC conduits cast in floor slab and concealed in the walls. 40 Lm 1.58 350x100mm deep GI cable tray complete with all accessories as manufactured by Power Technics for power cables. 90 Lm Mecoy Consultants Ltd H-10
MCB's and MCCB's for the DB's as follows and as Schneider Electric: 1.59 10A SP MCB 7 1.60 20A SP MCB 7 1.61 32A SP MCB 9 1.62 32A TP MCCB 6 1.63 50A TP MCCB 6 1.64 Blanking plates 9 MAIN LV METERBOARD 1.65 L.V (415V, 3-Phase, TPN) 14SWG main LV meterboard complete with the following items and inclusive of inter-wiring to the generator for the maintained power supply and all the other necessary accessories as follows: 1 Item a) CT Metering: Indicator bulbs (RYB) 1 1-500A Digital ammeter c/w selector switch, 1 0-500V Digital voltmeter c/w selector switch, 5A fuse b) 1 500A, TPN - adjustable incomer MCCB 1 c) One set of 500A, TPN busbars 1 d) The following outgoing feeders in the Board i) 200A TP MCCB 1 i) 160A TP MCCB 1 ii) 100A TP MCCB 4 iii) 40A SP MCCB 3 iv) TP Spareways for future use 4 1.66 Allow for liaising with K.P & L.Co Ltd for switch off of power & relocation of existing Meter & Circuits to the new meterboard. 1.67 Disconnect and strip down the power supply feeder to the existing switch board and for connection to the new meter board. 1.68 Firemans switch including interwiring with the main incomer MCCB. 1.69 Generator mains comprising of 4 core 35mm2 PVC/SWA/PVC copper cable drawn in the 50mm duct provided elsewhere and running from the generator to the AMF panel. 1.70 Allow for connection of the generator to the 160A TP MCCB. 1.71 Earthing of the generator & Meterboard using 50mm² SC PVC insulated earth lead, 1200mm long by 15mm Ø copper electrode with clamp and earthing manhole with inspection cover. 1.72 Allow for identifying and establishing the existing electrical services, careful removal including fittings and accessories and handing over to the client 1 Item 1 Item 1 50 Lm 1 Item 1 Item Mecoy Consultants Ltd H-11
1.73 250x50mm Deep powder coated cable tray complete with all accessories i.e nuts, sleeves and bolts 10 Lm 1.74 100mm Ø HG PVC duct 150 Lm 1.75 50mm Ø HG PVC duct 150 Lm 1.76 600 x 450 x 600mm deep Manhole complete with cover 1.77 250x250x75mm Heavy gauge Galvanized steel adaptable box for Fire alarm and Telephone cabling 1.78 Trenching to a minimum depth of 0.7M, laying, sifting, tiling and back filling for the ducts 8 4 85 Lm GATE HOUSE AND GENERATOR ROOM 1.79 Lighting point completely wired in 3x1.5mm² single core PVC insulated copper cables drawn in 20mm diameter HG PVC conduits including all accessories but excluding the switch and luminaire for; (i) One way switching 1 (ii) Two way switching 4 (iii) Photocell switching 4 1.80 10Amps, moulded plate in ivory white colour as MK or approved equivalent as follows: (i) 10A one gang one way switch 6 (ii) 10A one gang two way switch Lighting fittings complete with lamps of appropriate wattage and colour rendering and fixing materials as follows: 1.81 10W LED Ceiling club circular luminaire with silver cover as illumat Cat ILMLED-10-DL-S type 'C' 28 1.82 1 x 36W, 1200mm HPF bare batten fluorescent fitting as Thorn Popular Pack range or equal and approved equivalent type '4' 1.83 450mm, 18W Mirror strip luminaire complete with diffuser as Thorn Arrowslim type ''e'' 1.84 13A SP raw power socket point completely wired in 3x2.5mm² single core PVC insulated copper cables drawn in 20mm diameter HG PVC conduits including all accessories but excluding the switched socket outlet 4 6 1.85 13A moulded socket outlet plate as MK/Crabtree ranges or approved equivalent as follows:- (i) Twin switched 6 Mecoy Consultants Ltd H-12
External Security Lighting: 1.86 Bulkhead fitting with aluminium alloy body and polycarbonate diffuser for 2 x 9 watts PL lamps as Massive Boston or equal & approved equivalent type ''G'' 1.87 20A 240V 3P contactor for switching external lights as TELEMECANIQUE complete with housing and all accessories. 1.88 A photocell unit to fit 70-75 Lux switch on level and 1.5 Maximum differential and wired to energize the contactors complete with a D.P override switch as Thorn QPK 1.89 IP 65 50W Led floodlight as thorn or equal and approved equivalent 1.90 Hand drier power point completely wired in 3x2.5mm² single core PVC insulated copper cables drawn in 25mm diameter HG PVC conduits including all accessories but excluding the 20A DP fused switched connection unit. 1.91 20A DP fused switched connection unit complete with neon indicator as MK for Hand drier/fan. 1.92 6-ways SP&N 100Amps Consumer Unit, MCB, flush mounted, metal cased unit complete with 100Amps SP&N integral mcb as Schneider Electric or equal and approved equivalent 1.93 Sub-mains cables comprising wiring in 2C, 6mm2 PVC/SWA/PVC CU cables drawn in HG PVC conduits provided elsewhere from Lv switchboard to consumer unit at gate houses/genset house. 1 4 3 350 Lm 1.94 50mm Ø HG PVC duct 350 Lm 1.95 300 x 300 x 300mm deep Manhole complete with cover 1.96 250x250x75mm Heavy gauge Galvanized steel adaptable box for Fire alarm and Telephone cabling 10 3 Mecoy Consultants Ltd H-13
GROUND FLOOR BILL COLLECTION PAGE AMOUNT KSh. 1.00 Total Amount For Page H-6 Brought Forward; 2.00 Total Amount For Page H-7 Brought Forward; 3.00 Total Amount For Page H-8 Brought Forward; 4.00 Total Amount For Page H-9 Brought Forward; 5.00 Total Amount For Page H-10 Brought Forward; 6.00 Total Amount For Page H-11 Brought Forward; 7.00 Total Amount For Page H-12 Brought Forward; 7.00 Total Amount For Page H-13 Brought Forward; Total Amount Carried Forward To Bills Summary Page Mecoy Consultants Ltd H-14
BILL 2 FIRST FLOOR Supply, Deliver, Install, Set to Work and Commission the Following: 2.01 Lighting point completely wired in 3x1.5mm² single core PVC insulated copper cables drawn in 20mm diameter HG PVC conduits including all accessories but excluding the switch and luminaire for; (i) One way switching 10 (ii) Two way switching 7 2.02 10Amps, moulded plate in ivory white colour as MK or approved equivalent as follows: (i) 10A one gang one way switch 18 (ii) 10A two gang one way switch 4 (iii) 10A one gang two way switch 6 (iv) 10A two gang two way switch 4 (v) 10A three gang two way switch 6 Lighting fittings complete with lamps of appropriate wattage and colour rendering and fixing materials as follows: 2.03 10W LED Ceiling club circular luminaire with silver cover as illumat Cat ILMLED-10-DL-S type 'C' 28 2.04 600mm x600mm, recessed module LED luminaire panel as Massive or equal & approved equivalent type '4x18' 2.05 Recessed horizontal low energy downlight white finish with die cast aluminium ring and tempered protection glass, and to be complete with 2x18W PL lamp as Micromark MM6363 type 'E' 2.06 Self -contained single sided LED exit sign with for nonmaintained emergency lighting for 3 hour duration as Thorn or approved equivalent. 2.07 1 x 36W, 1200mm HPF bare batten fluorescent fitting as Thorn Popular Pack range or equal and approved equivalent type '4' 2.08 450mm, 18W Mirror strip luminaire complete with diffuser as Thorn Arrowslim type ''e'' 2.09 1 x 36W, 1200mm Surface mounted mirror strip HPF water proof 1P65 fluorescent fitting with diffuser as Thorn or equal and approved equivalent type "4M". 2.10 2 x 18W, 1200mm T8 recessed modular luminaire complete with tubes and with opal white diffuser as Thorn/Liper or approved equivalent type "4L". 20 16 4 3 4 30 Mecoy Consultants Ltd H-15
2.11 Small recessed LED downlighter fitting at the main Reception Area as Liper LP-COB20B DL or equal and approved equivalent type 'S' 2.12 Recessed LED downlighter fitting at the main Reception Area as Liper LPDL-30A-Y-30W DL or equal and approved equivalent type 'J' 2.13 Large decorative highbay pendant with metal die cast aluminium housing on single steel wire suspension for 70w lamps complete with prismatic polycarbonate, lamps & aluminium reflector as Thorn Glacier II or equal and approved equivalent type "B". 18 8 40 2.14 2 x 36W, 1200mm twin batten HPF fluorescent fitting with diffuser and and suspended using 2.5mm corrosion proof jack chain for an overall drop of 600mm below the ceiling as Thorn Diffuserlux or equal and approved equivalent type "4D". 10 POWER POINTS AND ACCESSORIES 2.15 13A SP raw power socket point completely wired in 3x2.5mm² single core PVC insulated copper cables drawn in 20mm diameter HG PVC conduits including all accessories but excluding the switched socket outlet 10 2.16 13A SP raw power socket point completely wired in 3x2.5mm² single core PVC insulated copper cables drawn in trunking. Allow for cables only. 9 2.17 13A moulded socket outlet plate as MK/Crabtree ranges or approved equivalent as follows:- (i) Twin switched 10 2.18 250mm x 50mm deep three compartment metal trunking constructed from heavy gauge powder coated steel, and shall be complete with all accessories for coupling and earthing but excluding trunking accessories. 180 Lm 2.19 Trunking accessories comprising of ; i. End caps 1 ii. Corner bends 1 iii. Tee joints 1 iv. Mounting plates for 13A SP sockets and telephone sockets. 9 2.19 32mm diameter heavy gauge PVC conduits interlinking the trunkings. 2.20 Hand drier power point completely wired in 3x2.5mm² single core PVC insulated copper cables drawn in 25mm diameter HG PVC conduits including all accessories but excluding the 20A DP fused switched connection unit. 60 Lm 4 Mecoy Consultants Ltd H-16
2.21 Extract Fan power point completely wired in 3x4mm² single core PVC insulated copper cables drawn in 25mm diameter HG PVC conduits including all accessories for the air extract fan but excluding the 20A DP switched connection unit. 2.22 20A DP fused switched connection unit complete with neon indicator as MK for Hand drier/fan. 2.23 Air conditioner power point completely wired in 3x4mm² single core PVC insulated copper cables drawn in 25mm diameter HG PVC conduits including all accessories but excluding the 20A DP fused switched connection unit. 2.24 20A DP fused switched connection unit complete with neon indicator as MK and marked "AC". 2.25 WHB/Urinal sensor control point comprising of wiring in 3x2.5mm² single core PVC insulated copper cables drawn in 20mm diameter HG PVC conduits and blanking plate 6 8 2.26 Lighting Control Presense sensor (light and motion sensor) as Osram Duo with the following characteristics: Operating voltage 220-240V 50Hz, Detection area - 12m dia minimum, Settable light value, Switch-off delay (if no motion detected), Installation height - 5m minimum 8 FIRE DETECTION & ALARM SYSTEM 2.27 Fire Alarm points comprising wiring in 1.5mm 2 heat resistant cables drawn in 20mmØ concealed HG PVC conduits 2.28 Addressable Photoelectric Smoke Detector as Menvier or approved equivalent 2.29 Addressable Heat Detector as Menvier or approved equivalent 2.30 Addressable Manual Fire Alarm 'Break Glass' call points as MENVIER or approved equivalent. 2.31 Addressable Electronic Fire Alarm sounder complete with Red Flashing beacon as MENVIER or approved equivalent. 4 18 16 4 3 DATA AND TELEVISION OUTLET POINT 2.32 Data/Voice outlet point comprising a draw wire drawn into 25mm Ø full length heavy gauge plastic conduits cast in floor slab and concealed in the walls but without the outlet plate 6 Mecoy Consultants Ltd H-17
2.33 Television outlet point complete with 75 Ohms screened aerial cable drawn in 20mm diameter heavy gauge PVC conduits including all accessories but excluding the television outlet plate 2.34 Television BNC Coaxial outlet plate as MK/Crabtree or any other approved equivalent DISTRIBUTION BOARDS AND SUBMAINS POWER SUPPLY CABLES 2.35 12-ways TP&N Distribution Boards 100Amps rating, MCB, flush mounted, metal cased unit complete with 100Amps TP&N integral mccb and with "front hinged lockable metal cover and glanding chamber to suit as Schneider Electric or approved equivalent. 2.36 Sub-mains cables consisting of 4C 16mm2, PVC/SWA/PVC CU cables from the Lv switchboard to the distribution boards "D & E" above drawn in 50mm diameter full length heavy gauge PVC conduits cast in floor slab and concealed in the walls. 95 Lm MCB's and MCCB's for the DB's as follows and as Schneider Electric: 2.37 10A SP MCB 7 2.38 20A SP MCB 7 2.39 32A SP MCB 9 2.40 32A TP MCCB 6 2.41 50A TP MCCB 6 2.42 Blanking plates 9 Mecoy Consultants Ltd H-18
FIRST FLOOR BILL COLLECTION PAGE AMOUNT KSh. 1.00 Total Amount For Page H-15 Brought Forward; 2.00 Total Amount For Page H-16 Brought Forward; 3.00 Total Amount For Page H-17 Brought Forward; 4.00 Total Amount For Page H-18 Brought Forward; Total Amount Carried Forward To Bills Summary Page Mecoy Consultants Ltd H-19
BILL 3 LIGHTNING PROTECTION Supply, Deliver, Install, Set to Work and Commission the Following: AIR TERMINATION 3.01 Supply and lay along the ridge cap 25mm X 3mm thick bare copper tape as Furse P. TC030 3.02 State Holdfast as Furse Cat. HF015 to fix the above tape to the roof ridge / parapet wall. 3.03 Air termination spike comprising the following. 2000mm by 15mm diameter copper rod as Furse P. RA240 Complete with: Copper multiple point as Furse P. RA 600 and Copper ridge saddle as Furse P SD115. 150 LM 25 4 Item DOWNWARD CONDUCTOR 3.04 Downward conductor comprising 25mm x 3mm thick bare copper tape as item 5.00 3.05 Copper square tape clamp for making crossing tape joints as Furse CT 105 FU. 3.06 DC tape clips for fixing the down conductors to the wall as Furse CT 105 FU 40 LM 8 80 3.07 Copper Oblong test clamp as Furse P NO CN 105 5 3.08 Steel conduits 32 mm diameter conduit. 25 LM 3.09 Saddles for the above item 3.08 15 EARTHING 3.10 Earth inspection concrete chamber 300mm x 300mm x 300mm with an air tight inspection cover to approval. 4 3.11 16 mm nominal diameter by 1500mm threaded copper bond earth rod as Furse P NO 310 driven to ground. 4 3.12 Driving stud for the above item as Furse ST 300 4 3.13 Earth electrode rod - to - downward conductor copper tape clamps as Furse CR 105 4 Total Amount Carried Forward To Bill Summary Page Mecoy Consultants Ltd H-20
BILL 4 STREET LIGHTING INSTALLATION WORKS Supply, Deliver, Install, Set to Work and Commission the Following: 4.01 8m steel galvanised street lighting column made from class "B"steel galvanised pipe complete with a single arm side entry bracket of 1.8m outreach. 30 4.02 25Amp cut-out complete with a 5HRC fuse 30 4.03 80W,LED light complete with reflector control and lamp 30 4.04 Photocell kit, Photocell, socket and bracket to be installed on the column brackets 3 4.05 Metal Control Pillar with locable facility. 3 4.06 4 M column for mounting the photocell unit. 3 4.07 1.5mm² twin with earth PVC insulated copper cable. 350 M 4.08 4 way consumer unit. 4.09 15A MCBs for the consumer units 4 4.10 Blanking plates for item G above 4 4.11 40A current operated earth leakages circuit breaker with rated leakage current of 0.5 A 4.12 4.0mm² 2 core PVC/SWA/PVC copper cable 550 M 4.13 Earth comprising of a 6.0mm 2 earth lead and 1800mm long by 15mm diameter copper earth electrode with driving tip and clamp in 300mm by 300mm by 300mm concrete manhole with removable cover. 10 4.14 Trenching to a minimum depth of 0.7M, sifting, cable laying, tilling and backfilling. 4.15 Road cutting, laying of 100mm PVC duct with concrete sorround and reinstating the road to its original state.microtunneling will be prefered. 600 M 40 M 4.16 Cable glands for terminating underground cables. 60 4.17 Tilling with "HATARI-DANGER" Tiles 1 Lot. 4.18 63Amp MCB with enclosure type Crabtree or equivalent. Total Amount Carried Forward To Bill Summary Page Mecoy Consultants Ltd H-21
ELECTRICAL BILLS SUMMARY PAGE AMOUNT KSh. 1.00 Total Amount For Ground Floor Brought Forward from Page H-14. 2.00 Total Amount For First Floor Brought Forward from Page H-19... 3.00 Total Amount For Lightning Protection Brought Forward from Page H- 20. 4.00 Total Amount For Street Lighting Brought Forward from Page H-21.. Total Amount For Electrical Works Carried Forward To Price Summary Page Mecoy Consultants Ltd H-22
PRICE SUMMARY AMOUNT KSh. 1 Preliminaries and General Conditions B/F From Page H - 5 2 Total Amount For Electrical Works Brought Forward from Bill Summary Page H-24 3 Allow a provisional Sum of Kenya Shillings One Million (1,000,000.00) only for Decorative Lighting 1,000,000.00 TOTAL AMOUNT FOR ELECTRICAL INSTALLATION WORKS CARRIED FORWARD TO MAIN WORKS GRAND SUMMARY PAGE TOTAL AMOUNT IN WORDS...... TENDERER'S NAME & STAMP.. SIGNATURE. DATE WITNESS ADDRESS. SIGNATURE OF WITNESS. DATE. Mecoy Consultants Ltd H-23