New Magnet Clamping Systems The World's Thinnest (37mm) Magnet Clamp!! (model MEG) Magnet clamping systems that ensure safety in operations. Large reduction in mold changing time.
MOLD ALARM MAGNET
MEK 150 2-7 S 13001
φ
Magnet Clamping Systems Power Unit m od e l MEC Features Operation Panel Magnetic Force Indicator This six-level illuminated indicator makes the invisible magnetic force visible. Located in the Operation Panel, it makes confirmation of Interlock Operation Panel communicates with the IMM to prevent operational sufficient force easily possible during operation. errors before they happen. An alarm sounds when magnetic force falls below 75%. The risk of mold dropping due to operational error is established. MAGNETIC FORCE GAUGE Display of Mold and IMM Status 100% The operation panel lamps indicate the presence of a mold, and if mold opening and mold closing are 90% operating properly. 80% Superior Performance 75% Simple operation leads to improved performance. 50% Compact 25% The operation panel fits in the palm of one s hand for ease of operation. 0% Magnetic Force Indicator Display Features Control Box Clamping Process Indicator (C.P.I.) The new C.P.I. clearly shows the type of error the clamp is experiencing, greatly simplifying recovery operations. For larger machines, there are multiple sensor coils that relay magnetic performance data, making it easy to identify the underperforming area. Superior Protection The MEC/MEW Power Units have an IP (Ingress Protection) rating of IP5X, a level that protects against the entry of dust particles, ensuring proper functionality. Compliance Friendly Clamping Process Indicator 固定 金型 MOLD プレート 異常 ALARM 可動 マグネット MAGNET The MEC/MEW units can comply with the standards of each country of operation. Magnet Burn-Out Protection If the magnets are activated or deactivated six times within a oneminute period, the operational function shuts down to avoid system burn-out. Functionality returns after 180 seconds. Wiring Clamping Process Indicator High-Speed Model model MEW Made-to-Order The MEW Power Unit cuts in half the time needed to activate/deactivate the magnets. Especially for larger magnetic clamping systems with many magnets to be activated/deactivated, this is a suitable option when shortened clamp-changing time is essential. 11 The cable connectors have been redesigned to make installation of the unit easier.
Model No. Indication Features Specifications External Dimensions External Dimensions Control Box Operation Panel Interlock Operating Procedure Model No. Indication Control Box / Operation Panel Magnet Clamping Systems Magnet Plate MEC 07 4 2 - V S 1 2 - J 1 2 3 2 8 7 6 5 4 Power Unit Power Unit Mounting Bracket Safety Chain 1 Attractive Time Cautions MEC : Standard MEＷ : High Speed 1 1. Please contact us for the details of MEW high speed model. 2 Box Size 4 : For 1 / 2 / 4 Discharge Common Use B : For 12 Discharge 8 : For 8 Discharge D : For 16 Discharge 3 Design No. 2 : Revision Number 4 Mold Change System V : Vertical Loading H : Horizontal Loading 5 Operating Temperature S : 0 120 Standard 6 The Number of Discharge 1 : 1 Discharge 8 : 8 Discharge 2 : 2 Discharge B : 12 Discharge 4 : 4 Discharge D : 16 Discharge 7 Voltage 2 : AC200V 50 / 60Hz 2 8 Indication Language 2. Please contact us for voltage other than 200V (50/60Hz). 3 J : The control box is written in both Japanese and English, while the remote operation panel is written in Japanese only. E : The control box is written in both Japanese and English, while the remote operation panel is written in English only. C : Both the control box and the remote operation panel are written in Chinese only. 3. Please contact us for indication language other than Japanese, English and Chinese. Specifications Model No. MEC / MEW Operating Temperature 0 55 (Based on JIS-C0025) Operating Voltage AC200V (50 / 60Hz) Permitted Range of Voltage±10% Withstand Voltage AC1000V (10mA/1 min.) Resistant Vibration Environment Protection Level Paint Color Notes : 1G/10 150Hz (Based on IEC60068/JIS-C0040) IP5X (Based on IEC60529 : 2001) Mansel 5PB4/4 (Japan Paint Color 75-40H) 1. For any specifications other than those described in "Model No. Indication" and "Specifications" sections, please contact us. "-Z " is added to the end of model in case of special execution. 2. Please contact us for specifications for North America. 12
φ φ φ φ
MOLD ALARM MAGNET MOLD ALARM MAGNET MOLD ALARM MAGNET MOLD ALARM MAGNET MOLD ALARM MAGNET
MOLD ALARM MAGNET MOLD MAGNET ALARM MOLD ALARM MAGNET MOLD ALARM MAGNET MOLD ALARM MAGNET MOLD ALARM MAGNET
MEJ 003 0-08
MES 100 1 - BC - 05-00
φ
Quick Ejector Rod model PME The ejector rod has been divided into a base rod and an attachment rod for speed, simplicity and ease-of-use when changing ejector patterns. No tools are required, allowing changes in mere seconds. Changing Ejector Rods Move the ejector plate Pull out the attachment Arrange them in the new Ejector rod patternchange fully forward. rods by hand. pattern. in seconds! Exchange start Two seconds progress Four seconds progress Completed in about five seconds 1 1. The changing time varies with molding machine size, ejector rod length, work environment, or else. For quick ejector rod details, please contact your KOSMEK representative, visit the KOSMEK website at [http://www.kosmek.com], or refer to the quick ejector rod catalog. HEAD OFFICE BRANCH OFFICE (U.S.A.) MEXICO REPRESENTATIVE OFFICE BRANCH OFFICE (EUROPE) BRANCH OFFICE (INDIA) THAILAND REPRESENTATIVE OFFICE 1-5, 2-Chome, Murotani, Nishi-ku, Kobe 651-2241 TEL.+81-78-991-5162 FAX.+81-78-991-8787 KOSMEK (U.S.A.) LTD. 650 Springer Drive, Lombard, IL 60148 USA TEL. +1-630-620-7650 FAX. +1-630-620-9015 KOSMEK USA Mexico Office Blvd Jurica la Campana 1040, B Colonia Punta Juriquilla Queretaro,QRO 76230 Mexico TEL.+52-442-161-2347 KOSMEK EUROPE GmbH Schleppeplatz 2 9020 Klagenfurt am Wörthersee Austria TEL.+43-463-287587 FAX.+43-463-287587-20 KOSMEK LTD - INDIA F 203, Level-2, First Floor, Prestige Center Point, Cunningham Road, Bangalore -560052 India TEL.+91-9880561695 67 Soi 58, RAMA 9 Rd., Suanluang, Suanluang, Bangkok 10250 TEL. +66-2-300-5132 FAX. +66-2-300-5133 http://www.kosmek.com FOR FURTHER INFORMATION ON UNLISTED SPECIFICATIONS AND SIZES, PLEASE CALL US. SPECIFICATIONS IN THIS LEAFLET ARE SUBJECT TO CHANGE WITHOUT NOTICE. JQA-QMA10823 CAT.NO.MEK002-04-GB Printed in Japan KOSMEK HEAD OFFICE 2013. 03 First 1Ry 2017. 06 4th 1Ry