143mm 6.0L LED PRESSURE COOKER 210mm MODEL: 7079151(LED-J) EAN:6001001442510
Thank you for purchasing our Platinum Pressure Cooker. Each unit has been manufactured to ensure safety, reliability, and ease of use. Before use, please read these instructions carefully and save them for future reference. When using your Platinum Pressure Cooker. basic precautions should always be followed, including the following: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge concerning the use of this product, unless they are supervised or have been given instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Always ensure that the voltage on the rating label corresponds to the voltage in your home. Check the power cord and plug regularly for any damage. If the cord or the plug is damaged, it must be replaced by the manufacturer or a qualified person in order to avoid an electrical hazard. This appliance is intended for household use only. Industrial or commercial use will void the warranty, and the supplier can not be held responsible for injury or damage caused when using the appliance for any other purpose than that intended. Incorrect operation and improper use can damage the appliance and cause injury to the user. Do not use the appliance if it has been dropped or damaged in any way. In case of damage, take the unit in for examination and/or repair by an authorized service agent. To reduce the risk of electric shock, do not immerse or expose the motor assembly, plug or the power cord to water or any other liquid. Never immerse the unit in water or any other liquid for cleaning purposes. Remove the plug from the socket by gripping the plug. Do not pull on the cord to disconnect the appliance. Always unplug the unit when not in use, before cleaning or when adding or removing parts. The use of accessory attachments that are not recommended or supplied by the manufacturer may result in injuries, fire or electric shock. This appliance is not suitable for outdoor use. Do not use this appliance for anything other than its intended use.
Do not let the cord hang over the edge of a table or counter. Ensure that the cord is not in a position where it can be pulled on inadvertently. Do not allow the cord to touch hot surfaces and do not place on or near a hot gas or electric burner or in a heated oven. Use of an extension cord with this appliance is not recommended. However, if it is necessary to use an extension lead, ensure that the lead is suited to the power consumption of the appliance to avoid overheating of the extension cord, appliance or plug point. Do not place the extension cord in a position where it can be pulled on by children or animals or tripped over. Do not carry the appliance by the power cord. Do not touch hot surfaces directly. Use handles or knobs. Do not leave this appliance unattended during use. Always unplug the unit when not in use. Allow it to cool before putting on or taking off parts, and before cleaning the appliance. Always operate the appliance on a smooth, even and stable surface. Do not place the unit on a hot surface. The manufacturer does not accept responsibility for any damage or injury caused by the improper or incorrect use of the appliance, or by repairs carried out by unauthorized personnel. In case of technical problems, switch off the machine and do not attempt to repair it yourself. Return the appliance to an authorized service facility for examination, adjustment or repair. Always insist on the use of original spare parts. Failure to comply with the above mentioned precautions and instructions, could affect the safe operation of this machine. This appliance is intended to be used in household and similar applications such as: - Staff kitchen areas in shops, offices and other working environments; - Farm house; - By clients in hotels, motels and other residential type environments; - Bed and breakfast type environments.
SAFETY OPERATION INSTRUCTIONS : 1. Switch off the Automatic LED Pressure Cooker and unplug it whenever it is not in use. 2. Test the Automatic LED Pressure Cooker and the cable regularly for the damage. If there is damage of any kind, the Automatic LED Pressure Cooker should not be used. 3. Please unplug the power cord immediately if air escapes from the rim of the lid and then send the automatic LED Pressure Cooker to a qualified repair technician. 4. Repairs to the Automatic LED Pressure Cooker should only be performed by a Qualified Electrician. 5. Do not use the Automatic LED Pressure Cooker with damp or wet hands or in a damp and flammable environments. 6. The height of food and water must be in accordance with Point 3 of To use your Automatic LED Pressure Cooker. 7. Take care not to damage the seal ring when using the Automatic LED Pressure Cooker. 8. Always keep the Anti-Block Cover clean and the Pressure Limit Valve and Float Valve clear. 9. Do not open the lid until the Float fails down. 10. Do not cover the rim, lid and the outer pot with a cloth while cooking. 11. Keep the button of the Inner Pot and the Heating Plate clean. Do not heat the inner pot in any other thermal energy or replace it with any other pot. 12.Use the plastic spatula or the plastic scoop to prevent damage to the coating of the inner pot. 13.Move the Automatic LED Pressure Cooker using the handle on outer body instead of lid handle. 14.Keep these instructions in a safe place for future reference. 15.If possible, please keep the gift box with the inner packaging. 16.Inspect the duct of pressure regulators that allows the escape of steam regularly to ensure they do not get block.(refer to picture d1) 17.The container must not be opened until the pressure has decreased sufficiently.
SPECIAL FEATURES : The Automatic LED Pressure Cooker is a new cooking utensil which has the advanced technology and merits of pressure cooking. The Automatic LED Pressure Cooker has an advanced structure which is designed for safety, reliability, multifunction and is easy to use, while saving your time and electricity. It is an ideal cooking utensil for a modern family. The Automatic LED Pressure Cooker can cook rice, braise food, etc 1. Cooking time can vary according to individual needs and preferences. 2. Use the KEEP WARM function to keep cooked food warm without over cooking. 3. The Automatic LED Pressure Cooker retains the food's nutrition and flavor by cooking the food in the thermal sealed inner pot. 4. The special sealing ring ensures an airtight inner pot and makes the lid easy to open and close. 5. Dupont Teflon non-stick coating makes the inner pot easy to clean. SAFETY DEVICES IN THE AUTOMATIC LED PRESSURE COOKER a. Open and close lid safety device : This prevents the Pressure Cooker from building excess pressure if the lid is not correctly locked into position. The device prevents you from opening the lid with pressure still inside the cooker. b. Pressure control device : Will turn the power off when the pressure inside exceeds the set level, and automatically turns the power on again when the pressure inside is lower and in a safe pressure range. c. Pressure limit valve : If the pressure cooker device and the thermostat do not activate, the pressure limit value will exhaust air automatically when the pressure inside exceeds the set level. d. Anti-block cover : It prevents food from blocking the pressure limit valve. e. Pressure release Device : If the pressure cooker device fails and the pressure limit valve locks then the pressure release device will force the rim of the lid to release air automatically. f. Thermostat : Will cut off the power if the pressure cooker is switched on without food inside or when the temperature inside exceeds the set level. g. Thermal fuse : A safety fuse that helps to regulate the temperature of the Automatic LED Pressure Cooker keeping it safe from exceeding excessive heat/pressure levels.
1. PRESSURE LIMIT VALVE 10. POWER CORD 2. FLOAT VALVE 11. LID HANDLE 3. PUSH ROD 12. LID 4. INNER POT 13. SEALING RING SUPPORT 5. DEW COLLECTOR 14. SEALING RING 6. HANDLE 15. OUTER POT 7. OUTER BODY 16. UPPER RING 8. HEATING PLATE COVER 17. CONTROL PANEL 9. BASE ACCESSORIES: A. MEASURING CUP B. PLASTIC SPATULA C. PLASTIC SOUP SCOOP
GENERAL VIEW OF THE SAFETY DEVICES OF THE AUTOMATIC LED PRESSURE COOKER A.OPEN AND CLOSE LID SAFETY DEVICE B.PRESSURE CONTROL DEVICE C.PRESSURE LIMIT VALVE D.ANTI-BLOCK COVER E.PRESSURE RELEASE DEVICE(ELASTIC SUPPORTING DEVICE) F.THERMOSTAT G.THERMAL FUSE RATED VOLTAGE RATED FREQUENCY RATED POWER CAPACITY WORKING PRESSURE PRESSURE LIMIT KEEP WARM TEMP AC220-240V 50Hz 1100W 6L 60-80K Pa 100K Pa 60-80 C
You must read all instruction before using. Remove all packaging material and please check carefully to ensure that your Pressure Cooker is in good condition. It must not have any cracks on the unit and no damage to the cord/plug. You must confirm that the voltage indicated on the Pressure Cooker corresponds with the voltage in your home. If you are using the Pressure Cooker for the first time, you should boil a full Pressure Cooker of water twice (water not over the marking of maximum level) and then discard the water. Then, wipe the surface with a damp cloth. Never connect the plug into the power outlet if it is no water in the Pressure Cooker. TO USE YOUR PRESSURE COOKER 1. To remove the Lid, hold the Lid Handle and turn clockwise to the position limit and lift. (Refer to pictures 1 and 2) 2. Remove the inner pot. 3. Place the water and food to be cooked into the inner pot. Note: The total volume of food and water must not exceed 80% of the height of the inner pot or fall below the 20% mark. Expandable foods must not exceed 60%. (Refer to pictures 3, 4 & 5) * The maximum rice capacity of 6L Pressure Cooker is 12 cups.
4. Wipe the inner pot and heating plate to clean any excess food or drippings, and ensure the outer shell and the heating plate are cleaned before placing the inner pot into the outer shell. (Refer to picture 6 & 7) 5. Close and lock the Lid Check the seal ring is well installed inside the lid by turning the Seal Ring in both directions. Align the lid handle with the limit level marking and turn in an anti-clockwise direction until a Crack sound is heard. This sound confirms the lid is now locked. (Refer to pictures 8 & 9) 6. Make sure that the Pressure Limit Valve is at the position. 7. Ensure that the float must be in "down" position before cooking. (Refer to picture 10 & 10a)
8. Connect the mains plug into the mains supply. The cooker light will illuminate. 9. Using the time control, set the cooking time according to the food to be cooked. Please set the cooking time consulting the cooking guidance below. 1. Direct cooking for soup, rice, porridge, tendon, chicken, bean : In the original state, the LED display shows. Press the above function button. to select the desired function. In the meanwhile, the corresponding function light will flash. After 5 seconds, function should start. Once the pressure generate inside the appliance, the float will rise up. In meantime, the lid is double locked so that users can't open the lid under this situation. **Important** Do not open the lid with force. 2. Preset cooking : After selected function, press Preset key within 5 seconds, then, user can preset the finished time. While pressing Preset key the finished time is increase. * Users can reset the function or cancel the timing setup anytime by pressing the Keep warm/cancel button during cooking or operation. Keeping Warm After the cooking cycle, the appliance will pass into the keep warm mode. The corresponding light will be on. In order to get the perfectly cooked rice, leave the rice for about 10 minutes longer. Please do not keep warm longer than 12 hours for the quality of food. In the keep warm mode, it is normal that if there is a little down in the upper ring. Please do not leave the spoon on the rice during the keep warm mode.
Place the Pressure Limit Valve to the position to deflate. (Refer pictures 11 &11a) When cooking liquid, do not lift the Pressure Limit Valve until the float is down. This is to prevent the cooker liquids from jetting through the air escape. A damp cloth can be used on the lid to accelerate cooling. Unplug the power cord. Hold the handle of the lid and turn the lid clockwise to the open position and lift. (refer to picture 1&2) 1. Unplug the power cord. 2. Cleaning the outer body with a soft dampcloth. Do not immerse the body in water or pour water onto the outer body. 3. Clean the inner pot with a sponge or a non-metallic soft brush. 4. Rinse underneath the lid including the sealing ring, pressure limit valve, anti-block cover, air escape and float valve, then dry. Cleaning the sealing ring and sealing ring supporting cover. Hold the handle of the sealing ring supporting axe. Check whether the clearance between the sealing ring and the rim of the lid is even and whether the supporting cover can rotate easily. Be sure not to assemble the sealing ring supporting cover upside down (See picture 12 &13) 12 13
Cleaning the anti-block cover : Pull the anti-block cover, clean with water and then press down on the lid to reinstall (See picture14 & 15) 14 15 Cleaning the float valve : Move the valve spool of the float valve up and down with your hand and rinse the sealing ring of the float valve at the same time. (See picture 16) 16 Cleaning the pressure limit valve : Take the pressure limit valve out, rinse with water and then place back into position. (See picture 17) 5. Remove the dew collector. Clean with water and then reinstall. 6. Clean the upper ring with a damp cloth. (See picture 18) REINSTAIL 17 18
NO. PROBLEM POSSIBLE CAUSE SOLUTION Cannot lock The sealing ring not installed Reinstall the sealing ring the lid properly The float seized by the rod Push the rod using your hands Cannot open The float did not fall down Press down the float the lid after the air escaped Air leak from the rim of the lid The seal ring not installed properly Food particles stuck on the Reinstall the sealing ring Clean up the sealing ring seal ring The seal ring has worn out Replace the sealing ring Air leaks from the float valve The float cannot rise up Food does not well cooked The lid does not lock properly Food particles on the seal ring of the float valve The seal ring for the float has worn out The pressure limit valve is not in the position Not enough food and water Air leak from the rim of lid or the pressure limit valve The cooking time is too short Re-lock the lid Clean the seal ring of float valve Replace the seal ring for the float Place the pressure limit valve to the position Place enough food and water in the inner pot Send the Automatic LED Pressure Cooker to a qualified electrician for repair Re-cook the food to the proper cooking time. STORAGE Store the LED Pressure Cooker after it has cooled down gradually. When not in use, disconnect the LED Pressure Cooker and store in safe, dry place, out of reach of children.
PLEASE AFFIX YOUR RECEIPT/PROOF OF PURCHASE HERE. IN THE EVENT OF A CLAIM UNDER THIS WARRANTY THE AFORESAID RECEIPT/PROOF OF PURCHASE MUST BE PRODUCED TOGETHER WITH THIS WARRANTY. Model number (lot number: ) Product name Date of purchase Place of purchase 1. The party selling the product ( the seller ) to the original purchaser of this product( the Customer hereby warrants that this proudct will be of good quality and,in good working order and, free of defects and suitable for its intended purpose under normalhousehold use, for a period of 1(one) year from the date of purchase( warranty period ) of this product. 2. In the event that the warranty period has not lapsed and the product is not of a good quality, or in good working order or, is defective or is not suitable for its intended purpose under normal household use, the customer may, subject to paragragh 3 below, return the product to the seller and have the following options available: 2.1 Within the first 6(six) months of the warranty: to receive a refund of the actual price paid or to exchange the product for the same or similar product of the same purchased value; 2.2 Within the second 6(six) months of the warranty: to have the product exchanged for the same or similar proudct of the same purchased value. 3. The seller will not replace the product or refund the customer in terms of this warranty if the product: 3.1 has been altered contrary to the instructions provided in the product manual; 3.2 has been misused, abused or tampered with; 3.3 is defective or not in working order due to ordinary wear and tear; 3.4 is damaged resulting from the customer's gross negligence, recklessness, malicious behavior or criminal conduct; 3.5 has been utilised for commercial use 4. This warranty applies only to the product that has been purchased from the seller and not to any expendables attached to or installed on the product by the customer 5. Any claim in terms of this warranty must be supported by the original proof of purchase.
14
15
16
17
18
19
20
21
12 13 14 15 22
16 17 18 23
24
25
26
27
28
29
30
31
32
33
12 13 14 15 34
16 17 18 35
36
37