Lista Cabinets Narrow Width MP Width Standard Width Lista has modular drawer storage cabinets that perfectly suit the widest range of applications. Our cabinets: feature unmatched versatility to meet all your current needs offer the flexibility to adapt to your future requirements provide the highest density storage provide maximum weightbearing capacity, organization and access feature all the benefits of our unique, infinitely customizable drawer (as described on page 4) Lista cabinets are durable, secure solutions constructed to provide years of safe, convenient storage and problem-free operation. An investment in a Lista modular drawer storage cabinet will be paying dividends well into the future. Cabinet Footprints Narrow Width Cabinet (page 10) 16 7 8" wide x 28 1 2" deep MP Width Cabinet (page 10) 22 3 16" wide x 28 1 2" deep Standard Width Cabinet (page 18) 28 1 4" wide x 28 1 2" deep Mid-Width Cabinet (page 24) 47" wide x 28 1 2" deep Double Width Cabinet (page 24) 56 1 2" wide x 28 1 2" deep Shallow Depth Cabinets Feature: High quality, all-steel construction Designed for use in the most rugged working environments. Benefit: Long life, durability and maximum weight capacity Feature: Variety of locking systems Available for mobile applications or additional security. Benefit: Reduces loss, limits access, improves safety Feature: 100% full extension on most drawers Continuous smooth extension even with a full 440 lb. load. Benefit: Easy access and full use of the furthest corner of each drawer Feature: Drawer dividers with bar code labeling Angled tops allow easy identification of contents and can even accommodate most bar code labels. Also can be fastened to drawer bottom for mobile applications. Benefit: Fast, accurate identification of compartment contents Feature: Seven different full sidewall heights Maximum use of cubic volume. Benefit: No wasted space Feature: Customizable drawer compartments Drawers have partitioning slots on all four sides and can be subdivided with a wide variety of drawer accessories for maximum partitioning flexibility. Benefit: Better organization, faster retrieval Feature: Ergonomic handles When drawers are closed, handles are flush with housing so nothing protrudes. Drawer handles are located at top of drawer. Benefit: Improves safety, appearance and ergonomics Feature: Label holders Labels run full width of handle for fast, easy identification. Benefit: Faster retrieval and easier inventory control ST Width Cabinet (page 34) 28 1 4" wide x 22 1 2" deep Feature: PrevenTip interlock system (standard on all cabinets) Unique, patented drawer locking system (US Patent 5,605,388) ensures that when one drawer is extended, all other drawers are locked in place to prevent accidental tip-over. Benefit: Added safety and maximum reliability and security HS Width Cabinet (page 34) 40 1 4" wide x 22 1 2" deep Feature: Variety of bases Different bases allow for easy stacking or moving with a fork or pallet truck, even when fully loaded. Galvaneel steel construction prevents rusting. Benefit: Flexibility and ease of relocation or rearrangement 6
Mid-Width Double Width ST Width HS Width 7
Lista Cabinets Make Any Workspace Work Lista s versatile and flexible storage cabinets are an ideal fit for a wide range of workspace and storage needs from manufacturing to warehousing to research and development. On these two pages you ll find photos depicting just a This sleek-looking Lista workspace system, featuring drawer and hinged door shelf cabinets, works to enhance both productivity and aesthetics at Ciba Corning s R & D and manufacturing facilities. few of the applications for which Lista cabinets have provided a perfect solution. Lista cabinets allow Kubota Tractor to store 33% of their entire stock in only 770 sq. ft. just 2% of their floor space. Lista storage solutions have helped the New York Daily News increase overall efficiency and reduce printing press downtime at their new facility. With the aid of Lista mobile cabinets, mechanics at the plant can roll tools directly to the press area to facilitate equipment maintenance. 8
This compact sterilization supply unit was designed to service 30 operating room suites in this Columbus, Ohio hospital. Lista cabinets safely store the hospital s entire operating room inventory in an organized manner. At this Baltimore marine research center and interactive museum, visitors can sit at Lista workbenches and examine marine larvae or spool DNA. The work areas feature custompainted cabinets and phenolic resin counter surfaces which protect against chemical stains. Counter height cabinets with maple tops create a highly efficient issue counter at this public utility s warehouse. Lista s modular storage is the more functional, organized, space-saving and aesthetically pleasing alternative to shelving. Shelf contents at this manufacturing plant (left) were disorganized, chaotic and dirty. The installation of Lista cabinets (right) provides for organized, secure storage with easy inventory control. 9
Lista Narrow and MP Width Cabinets Space-saving solutions for every workspace Lista s Narrow Width cabinets are ideally suited for use as workbench pedestals and/or space-maximizing file cabinets. Lista s MP Width cabinets are similarly well-suited for use as workbench pedestals or laboratory case work, and can also be adapted to serve as mobile cabinets. Both of these cabinets are perfect storage solutions when space is at a premium. NARROW WIDTH CABINET 16 7 /8" WIDE x 28 1 /2" DEEP MP WIDTH CABINET 22 3 /16" WIDE x 28 1 /2" DEEP FOR EASY-ORDER COMBINATIONS: NARROW WIDTH, PAGES 12-13 MP WIDTH, PAGES 14-15 NARROW AND MP WIDTH MOBILE CABINETS, PAGES 16-17 For easy location and retrieval, equipment and samples in this electronics testing lab are stored in a variety of Lista cabinets, including MP Width cabinets. Lista customized the cabinet colors to create a working environment that would be aesthetically pleasing and impressive to engineers, customers and prospects. 10
Narrow and MP Width Custom Cabinet Options For directions on ordering custom cabinets and complete descriptions of the options on this page, please see pages 42-43. Cabinet Housings Housing vertical supports are slotted at 1" increments to allow drawers, shelves and rollout trays to be assembled in any sequence. Narrow Width Cabinet Housings 16 7 8" (428mm) wide x 28 1 2" (725mm) deep NW300 NW450 NW600 NW750 NW900 NW1225 OVERALL HEIGHT (without base) 15 3 4" (400mm) 21 5 8" (550mm) 27 1 2" (700mm) 33 1 2" (850mm) 39 3 8" (1000mm) 52 3 16" (1325mm) MP Width Cabinet Housings 22 3 16" (564mm) wide x 28 1 2" (725mm) deep MP300 MP450 MP600 MP750 MP900 MP1225 MP1350 OVERALL HEIGHT (without base) 15 3 4" (400mm) 21 5 8" (550mm) 27 1 2" (700mm) 33 1 2" (850mm) 39 3 8" (1000mm) 52 3 16" (1325mm) 57 1 8" (1450mm) Locks Cabinets come equipped with an individual lock and 2 keys. To select other locking options, please see page 42. Color To order cabinet housing and drawer paint colors, please see page 43. Tops To order cabinet tops, please see page 31. Counter tops can be found on page 107. 12 1 2" (318mm)* 19 UNITS NARROW WIDTH *usable inside dimensions 24" (610mm)* 36 UNITS Bases Fork Truck Base Galvaneel steel base has snap-on front and rear covers. Color: to match housing. HOUSING HEIGHT MP-FTB MP width 2 3 8" (60mm) Frame Bases Used to raise height of Model 600 cabinets when used as workbench pedestals. Galvaneel steel base is recessed from cabinet front. Color: to match housing. G at end of part number indicates base comes with leveling glides. NW Width Frame Bases HEIGHT RAISE 600 CABS. TO NW-2 2" (50mm) desk height NW-4 4" (100mm) low bench height NW-6 6" (150mm) standard bench height NW-2G 2" (50mm) desk height NW-4G 4" (100mm) low bench height NW-6G 6" (150mm) standard bench height MP Width Frame Bases HEIGHT RAISE 600 CABS. TO MP-2 2" (50mm) desk height MP-4 4" (100mm) low bench height MP-6 6" (150mm) standard bench height MP-2G 2" (50mm) desk height MP-4G 4" (100mm) low bench height MP-6G 6" (150mm) standard bench height Mobile Caster Bases Two rigid and 2 swivel heavy duty casters are factory mounted to the base. Each of the swivel casters has individual wheel locks. 18" (459mm)* 27 UNITS MP WIDTH Drawers Drawers are welded heavy gauge steel, with full width handles with end caps and paper labeling strips with clear label covers. Drawer Partitioning Narrow Width interior sets, page 13 MP Width interior sets, page 15 Individual drawer partitioning accessories, pages 114-121 Shelves, Trays and Doors Adjustable Shelves Made of steel sheet with reinforcing ribs welded on, shelves are 1" thick. Adjustable shelves fit into vertical side frames with support brackets, which are included. Color: gray. Roll-Out Trays Roll-out trays are smooth without perforations and have 1 3 4" rear and side retaining walls. Doors Information on doors can be found on page 30. FOR USE WITH CASTERS OVERALL HT. CAPACITY TMMB-19/3.5 1 NW housing 3 1 2" x 1 1 4" 4 3 4" 900 lb. CB-NW4x1 1 NW housing 4" x 1 1 4" 5 1 2" 1000 lb. CB-NW4B 1 NW housing 4" x 2" 6 1 4" 1400 lb. CB-MP4B 1 MP housing 4" x 2" 6 1 4" 1400 lb. CB-MP6B 1 MP housing 6" x 2" 8" 2400 lb. CB-384B 2 NW housings 4" x 2" 6 1 4" 1400 lb. CB-386B 2 NW housings 6" x 2" 8" 2400 lb. CB-544B 2 MP housings 4" x 2" 6 1 4" 1400 lb. CB-546B 2 MP housings 6" x 2" 8" 2400 lb. 24" (610mm)* 36 UNITS Narrow Width (150 lb./70kg maximum load capacity) USABLE HT. SIDEWALL HT. Drawers 95% Extension NW50N 1 3 8" (36mm) 1 1 4" (32mm) NW75N 2 3 8" (61mm) 2" (52mm) NW100N 3 3 8" (86mm) 3" (77mm) NW125N 4 3 8" (111mm) 3" (77mm) NW150N 5 1 4" (133mm) 5" (127mm) NW175N 6 1 4" (159mm) 5" (127mm) NW200N 7 1 4" (185mm) 7" (177mm) NW225N 8 1 4" (203mm) 7" (177mm) NW250N 9 1 4" (229mm) 8 15 16" (227mm) NW300N-FFH* 11" (279mm) 10" (254mm) NW325N-FFH* 12" (305mm) 10" (254mm) *file drawer (for letter files only) USABLE WIDTH USABLE DEPTH Adjustable Shelf NW-AS 14 3 8" (366mm) 24 1 4" (616mm) Bottom Shelf NW-BS 14 9 16" (370mm) 23 3 4" (604mm) MP Width (150 lb./70kg maximum load capacity) USABLE HT. SIDEWALL HT. Drawers 95% Extension MP50N 1 3 8" (36mm) 1 1 4" (32mm) MP75N 2 3 8" (61mm) 2" (52mm) MP100N 3 3 8" (86mm) 3" (77mm) MP125N 4 3 8" (111mm) 3" (77mm) MP150N 5 1 4" (133mm) 5" (127mm) MP175N 6 1 4" (159mm) 5" (127mm) MP200N 7 1 4" (185mm) 7" (177mm) MP250N 9 1 4" (229mm) 8 15 16" (227mm) USABLE WIDTH USABLE DEPTH Roll-Out Tray 95% Extension MP-TCN* 17 1 8" (435mm) 24" (609mm) *mounts behind MP right hand flush door (see page 30 for MP cabinet doors) (440 lb./200kg maximum load capacity) USABLE HT. SIDEWALL HT. Drawers 100% Full Extension MP 2 1 8" (54mm) 2" (52mm) MP 3 1 8" (79mm) 3" (77mm) MP125F 4 1 16" (104mm) 3" (77mm) MP 5 1 16" (129mm) 5" (127mm) MP1 6 1 16" (154mm) 5" (127mm) MP 7 1 32" (179mm) 7" (177mm) MP225F 8" (203mm) 7" (177mm) MP250F 9" (229mm) 8 15 16" (227mm) MP300F 11" (279mm) 10 15 16" (277mm) MP350F 13" (329mm) 10 15 16" (277mm) USABLE WIDTH USABLE DEPTH Adjustable Shelf MP-AS 19 5 8" (498mm) 24 1 4" (616mm) Bottom Shelf MP-BS 19 13 16" (504mm) 23 3 4" (604mm) Roll-Out Tray 100% Full Extension MP-TCF 18" (244mm) 24" (609mm) 11
Narrow Width Easy-Order Cabinet Combinations NW600 Cabinets (with base) 33 1 2" high (including base) x 16 7 8" wide x 28 1 2" deep NW750 Cabinets 33 1 2" high x 16 7 8" wide x 28 1 2" deep NW900 Cabinets 39 3 8" high x 16 7 8" wide x 28 1 2" deep 300N-FFH FILE How to read the charts on this page The 2 columns to the right of each cabinet illustration indicate drawer heights and drawer interior sets. (For drawer capacities and sizes, see page 11.) Below the illustration, you will find part numbers, the number of drawers, and the number of drawer compartments created by the interior sets (shown on page 13). How to order a Narrow Width Easy-Order Cabinet 1. Select Easy-Order Cabinet Combination either with or without drawer interior sets. An A at the end of the part number (i.e., NW600-2A) designates that the cabinet comes with drawer interior sets (shown on page 13). 2. Select lock type (box ). 3. Select color(s) for housing and drawer fronts (see page 43 for color chart). 300N-FFH 300N-FFH 6" BASE FILE FILE NW600-1- 2-75N 018 75N 212 100N 212 6" BASE NW600-2- 5 - NW600-2A - 5 50 100N 212 150N 108 150N 108 300N-FFH FILE 300N-FFH FILE NW750-1- 3 - NW750-1A- 3 4 75N 018 75N 212 100N 212 NW750-2- 6 - NW750-2A - 6 54 100N 212 100N 212 250N - 300N-FFH 300N-FFH FILE FILE NW900-1- 3-75N 018 75N 212 100N 212 NW900-2- 7 - NW900-2A - 7 58 100N 212 100N 212 250N - Lock* N = none I = individual K = keyed-alike M = master * for lock options, see page 42 Select Color* * for color chart, see page 43 EXAMPLE: to order an NW750-2A cabinet with an individual lock, and with a Bright Blue cabinet housing and Pearl Gray drawers, the part number would be NW750-2A-I, and the paint color codes would be BB for the housing and PG for the drawer fronts. 6" BASE NW600-3- 4 - NW600-3A - 4 32 450 DOOR BOTTOM SHELF 6" BASE NW600-4- 1 - NW600-4A - 1 4 75N 018 100N 212 125N 104 300N-FFH FILE NW750-3- 5 - NW750-3A - 5 32 600 DOOR ADJUSTABLE SHELF BOTTOM SHELF NW750-4- 1 - NW750-4A - 1 4 75N 018 100N 212 125N 104 NW900-3- 6 - NW900-3A - 6 36 750 DOOR ADJUSTABLE SHELF BOTTOM SHELF NW900-4- 1 - NW900-4A - 1 4 300N-FFH 300N-FFH FILE FILE 300N-FFH FILE 300N-FFH FILE 6" BASE 12 NW600-5- 4 - NW600-5A - 4 34 NW750-5- 5 - NW750-5A - 5 38 325N-FFH FILE NW1225-1- 4 -
Narrow Width Drawer Interior Sets How to order a Narrow Width Easy-Order Drawer Interior Set To order the drawer interior sets shown on this page, use the part number in the chart and add the drawer height. EXAMPLE: to order an NWDR008 drawer interior for a 100 height (3") drawer, the part ordering number would be NWDR008-100. NWDR104 2 5 1 2" 2 6 1 4" For drawers 50, 75, 100, 150 and 200 NWDR107 4 4 1 8" 3 7 1 2" NWDR108 4 5 1 2" 4 6 1 4" For drawers 50, 75, 100, 150 and 200 NWDR212 8 3 1 2" 4 4 1 8" For drawers 50, 75 and 100 COMPTS. CMPT. SIZE NWDR008 8 6" x 6" For drawers 50, 75 and 100 COMPTS. CMPT. SIZE NWDR012 8 3" x 6" 4 6" x 6" For drawers 50, 75 and 100 COMPTS. CMPT. SIZE NWDR016 16 3" x 6" For drawers 50 and 75 COMPTS. CMPT. SIZE NWDR018 2 6" x 6" 8 3" x 6" 8 3" x 3" For drawers 50 and 75 COMPTS. CMPT. SIZE NWDR024 16 3" x 3" 8 3" x 6" For drawers 50 and 75 COMPTS. CMPT. SIZE NWDR082 16 3" x 3" 24 3" x 2" For drawers 50 and 75 COMPTS. CMPT. SIZE NWDR083 32 2" x 3" 24 2" x 2" NWDRAT06 sliding accessory tray 5 3" 13
MP Width Easy-Order Cabinet Combinations MP600 Cabinets (with base) 33 1 2" high (including base) x 22 3 16" wide x 28 1 2" deep MP750 Cabinets 33 1 2" high x 22 3 16" wide x 28 1 2" deep MP900 Cabinets 39 3 8" high x 22 3 16" wide x 28 1 2" deep How to read the charts on this page The 2 columns to the right of each cabinet illustration indicate drawer heights and drawer interior sets. (For drawer capacities and sizes, see page 11.) Below the illustration, you will find part numbers, the number of drawers, and the number of drawer compartments created by the interior sets (shown on page 15). How to order an MP Width Easy-Order Cabinet 1. Select Easy-Order Cabinet Combination either with or without drawer interior sets. An A at the end of the part number (i.e., MP600-2A) designates that the cabinet comes with drawer interior sets (shown on page 15). 2. Select lock type (box ). 3. Select color(s) for housing and drawer fronts (see page 43 for color chart). 75N 510 75N 018 100N 316 150N 209 6" BASE MP600-2- 5 - MP600-2A - 5 57 MP600-3- 4 - MP600-3A- 4 33 100N 316 150N 209 6" BASE 75N 028 75N 316 100N 316 100N 209 100N 209 75N 028 75N 316 100N 209 150N 209 MP750-2- 6 - MP750-2A - 6 70 100N 316 150N 209 300F - MP750-4- 4 - MP750-4A - 4 29 600 DOOR ADJUSTABLE SHELF 75N 028 75N 316 100N 316 150N 209 150N 209 MP900-2- 7 - MP900-2A - 7 86 100N 316 150N 209 150N 209 300F - MP900-4- 5 - MP900-4A - 5 38 100N 316 100N 209 150N 209 250N 104 Lock* N = none I = individual K = keyed-alike M = master * for lock options, see page 42 6" BASE MP600-7- 6 - MP600-7A- 6 82 BOTTOM SHELF MP750-19- 1 - MP750-19A - 1 4 MP900-11- 6 - MP900-11A - 6 46 Select Color* * for color chart, see page 43 EXAMPLE: to order an MP750-4A cabinet with an individual lock, and with a Bright Blue cabinet housing and Pearl Gray drawers, the part number would be MP750-4A-I, and the paint color codes would be BB for the housing and PG for the drawer fronts. 450 DOOR BOTTOM SHELF 6" BASE MP600-19- 1 - MP600-19A - 1 4 75N 316 100N 209 125N 104 300F - 100N 316 100N 209 150N 209 250N 104 MP750-20- 5 - MP750-20A - 5 42 75N 028 75N 316 100N 316 100N 209 100N 209 150N 209 750 DOOR ADJUSTABLE SHELF BOTTOM SHELF 100N 209 600 DOOR ADJUSTABLE SHELF MP900-12- 1 - MP900-12A - 1 4 6" BASE BOTTOM SHELF MP600-20- 4 - MP600-20A - 4 29 MP750-21- 7 - MP750-21A- 7 91 MP900-13- 2 - MP900-13A- 2 13 14
MP Width Drawer Interior Sets How to order an MP Width Drawer Interior Set To order the drawer interior sets shown on this page, use the part number in the chart and add the drawer height. EXAMPLE: to order an MPDR209 drawer interior for a 100 height (3") drawer, the part ordering number would be MPDR209-100. MPDR104 2 7 1 2" 2 9 1 4" MPDR206 6 5 1 2" MPDR209 9 5 1 2" For drawers 50 through 150 MPDR316 4 3 1 2" 12 4 1 8" For drawers 50 through 125 MPDR430 18 2 5 8" 12 3 1 2" For drawers 50 through 125 MPDR524 12 2 1 8" 12 2 5 8" For drawers 50 through 125 COMPTS. CMPT. SIZE MPDR012 12 6" x 6" For drawers 50 through 125 COMPTS. CMPT. SIZE MPDR018 12 3" x 6" 12 6" x 6" For drawers 50 and 75 COMPTS. CMPT. SIZE MPDR028 16 3" x 3" 8 3" x 6" 4 6" x 6" For drawers 50 and 75 MPDR480 24 1 1 4" 16 1 3 4" For drawers 50 and 75 MPDR482 23 1 3 4" 14 2 3 4" MPDR-AT10 sliding accessory tray 1 6" 8 3" 15
Narrow and MP Width Easy-Order Mobile Cabinet Combinations Each mobile cabinet comes with: 2 fixed and 2 swivel-and-lock casters handle(s) individual drawer latches 95% extension drawers with 150 lb. load capacity How to read the charts on this page The 2 columns to the right of each cabinet illustration indicate drawer heights and drawer interior sets. (For drawer capacities and sizes, see page 11.) Below the illustration, you will find part numbers, the number of drawers, and the number of drawer compartments created by the interior sets (shown on pages 13 and 15). How to order a Narrow or MP Width Easy-Order Mobile Cabinet 1. Select Easy-Order Mobile Cabinet Combination either with or without drawer interior sets. An A at the end of the part number (i.e., TBMP300-2A) designates that the cabinet comes with drawer interior sets (shown on pages 13 and 15). 2. Select lock type (box ). 3. Select color(s) for housing and drawer fronts (see page 43 for color chart). 4. To select a top, see page 31. 16 7 8" wide x 28 1 2" deep x 32 1 2" high DRWS. CMPTS. CSTRS. MSC-19 - - 4" x 1 1 4" includes retainer top with ribbed mat 22 3 16" wide x 28 1 2" deep x 32 1 2" high DRWS. CMPTS. CSTRS. MSC - - 4" x 1 1 4" includes retainer top with ribbed mat 75N 212 75N 212 100N 107 16 7 8" wide x 28 1 2" deep x 33" high DRWS. CMPTS. CSTRS. MNW600-2- 5-4" x 1 1 4" MNW600-2A- 5 39 4" x 1 1 4" 75N 212 100N 107 125N 104 16 7 8" wide x 28 1 2" deep x 32 1 2" high DRWS. CMPTS. CSTRS. MNW300-2- 3-4" x 1 1 4" MNW300-2A- 3 23 4" x 1 1 4" includes retainer top with ribbed mat 100N 107 16 7 8" wide x 28 1 2" deep x 32 1 2" high DRWS. CMPTS. CSTRS. MNW300-4- 2-4" x 1 1 4" MNW300-4A- 2 11 4" x 1 1 4" includes retainer top with ribbed mat 75N 316 100N 209 125N 104 22 3 16" wide x 28 1 2" deep x 32 1 2" high DRWS. CMPTS. CSTRS. TBMP300-2- 3-4" x 1 1 4" TBMP300-2A- 3 23 4" x 1 1 4" includes retainer top with ribbed mat 100N 209 22 3 16" wide x 28 1 2" deep x 32 1 2" high DRWS. CMPTS. CSTRS. TBMP300-3- 2-4" x 1 1 4" TBMP300-3A- 2 13 4" x 1 1 4" includes retainer top with ribbed mat 100N 212 150N 107 16 7 8" wide x 28 1 2" deep x 33" high DRWS. CMPTS. CSTRS. MNW600-3- 4-4" x 1 1 4" MNW600-3A- 4 27 4" x 1 1 4" 75N 212 75N 212 100N 212 100N 107 100N 107 16 7 8" wide x 28 1 2" deep x 33" high DRWS. CMPTS. CSTRS. MNW600-4- 6-4" x 1 1 4" MNW600-4A- 6 54 4" x 1 1 4" Lock* N = none I = individual K = keyed-alike M = master * for lock options, see page 42 Select Color* * for color chart, see page 43 16 EXAMPLE: to order an MNW600-3A cabinet with an individual lock, with a Bright Blue cabinet housing and Pearl Gray drawers, the part number would be MNW600-3A-I, and the paint color codes would be BB for the housing and PG for the drawer fronts.
Mobile Work Centers 75N 316 75N 209 100N 209 75N 212 75N 212 100N 107 150N 107 75N 316 75N 209 100N 209 DRAW. INT. 75N 212 75N 107 100N 107 INCL. INT. 450 DOOR SHELF 22 3 16" wide x 28 1 2" deep x 35 1 2" high DRWS. CMPTS. CSTRS. TBMP600-2- 5-6" x 2" TBMP600-2A- 5 42 6" x 2" 16 7 8" wide x 28 1 2" deep x 39" high DRWS. CMPTS. CSTRS. MNW750-2- 6-4" x 1 1 4" MNW750-2A- 6 46 4" x 1 1 4" 22 3 16" wide x 28 1 2" deep x 41 1 2" high DRWS. CMPTS. CSTRS. TBMP750-2- 6-6" x 2" TBMP750-2A- 6 46 6" x 2" 33 3 4" wide x 28 1 2" deep x 33 3 4" high DRWS. CMPTS. CSTRS. MWCNW600-1- 6-4" x 2" MWCNW600-1A- 6 38 4" x 2" 100N 209 150N 209 100N 212 150N 107 150N 107 100N 209 150N 209 DRAW. INT. 75N 510 75N 018 100N 316 150N 209 600 DOOR ADJ. SHELF SHELF 22 3 16" wide x 28 1 2" deep x 35 1 2" high DRWS. CMPTS. CSTRS. TBMP600-3- 4-6" x 2" TBMP600-3A- 4 26 6" x 2" 16 7 8" wide x 28 1 2" deep x 39" high DRWS. CMPTS. CSTRS. MNW750-3- 5-4" x 1 1 4" MNW750-3A- 5 34 4" x 1 1 4" 22 3 16" wide x 28 1 2" deep x 41 1 2" high DRWS. CMPTS. CSTRS. TBMP750-3- 5-6" x 2" TBMP750-3A- 5 30 6" x 2" 39" wide x 28 1 2" deep x 33 3 4" high DRWS. CMPTS. CSTRS. MWCMPNW600-5 - 4" x 2" MWCMPNW600A- 5 42 4" x 2" 75N 316 75N 209 100N 209 100N 206 100N 104 75N 212 75N 212 100N 212 100N 107 150N 107 250N 104 75N 316 75N 209 100N 209 100N 104 250F 104 DRAW. INT. 75N 510 75N 018 100N 316 150N 209 600 DOOR ADJ. SHELF SHELF 22 3 16" wide x 28 1 2" deep x 35 1 2" high DRWS. CMPTS. CSTRS. TBMP600-4- 6-6" x 2" TBMP600-4A- 6 48 6" x 2" 16 7 8" wide x 28 1 2" deep x 39" high DRWS. CMPTS. CSTRS. MNW750-4- 6-4" x 1 1 4" MNW750-4A- 6 54 4" x 1 1 4" 22 3 16" wide x 28 1 2" deep x 41 1 2" high DRWS. CMPTS. CSTRS. TBMP750-4- 6-6" x 2" TBMP750-4A- 6 46 6" x 2" 44 3 8" wide x 28 1 2" deep x 35 1 2" high DRWS. CMPTS. CSTRS. WCMP600-1- 6-6" x 2" WCMP600-1A- 6 57 6" x 2" 17
Lista Standard Width Cabinets Setting the standard for versatility Our most popular storage cabinet, the Standard Width can be designed with a variety of drawer heights and drawer interior configurations to fit the needs of a wide range of installations and applications. STANDARD WIDTH CABINET 28 1 /4" WIDE x 28 1 /2" DEEP FOR EASY-ORDER COMBINATIONS, SEE PAGES 20-23. To make the most efficient use of space at the Pawtuxet Naval Air Station warehouse, a storage system was built by stacking Lista Standard Width shelf cabinets on top of Standard Width drawer cabinets. The system provides the space savings, weight-bearing capacity and security the Naval Air Station needs for their avionics equipment storage. 18
Standard Width Custom Cabinet Options For directions on ordering custom cabinets and complete descriptions 24" (610mm)* 36 UNITS of the options on this page, please see pages 42-43. 24" (610mm)* 36 UNITS STANDARD WIDTH *usable inside dimensions STANDARD WIDTH Cabinet Housings Housing vertical supports are slotted at 1" increments to allow drawers, shelves and rollout trays to be assembled in any sequence. Standard Width Cabinet Housings 28 1 4" (717mm) wide x 28 1 2" (725mm) deep SC300 SC600 SC750 SC900 SC1050 SC1225 SC1350 SC1525 OVERALL HEIGHT (without base) 15 3 4" (400mm) 27 1 2" (700mm) 33 1 2" (850mm) 39 3 8" (1000mm) 45 1 4" (1150mm) 52 3 16" (1325mm) 57 1 8" (1450mm) 64" (1625mm) Locks Cabinets come equipped with an individual lock and 2 keys. To select other locking options, please see page 42. Color To order cabinet housing and drawer paint colors, please see page 43. Bases Fork Truck Base Galvaneel steel base has snap-on front and rear covers. Color: to match housing. SC-FTB HEIGHT 2 3 8" (60mm) Pallet Truck Base Pallet truck base permits moving of fully loaded cabinets with a hand pallet truck. Base has snap-on front and rear covers. Color: to match housing. USABLE WIDTH HEIGHT SC-PTB 26" (659mm) 3 15 16" (100mm) Mobile Caster Bases Two rigid and 2 swivel heavy duty casters are factory mounted to the base. Each of the swivel casters has individual wheel locks. CASTER OVERALL HT. CAP. CB-SC4B 4" x 2" 6 1 4" 1400 lb. CB-SC6B 6" x 2" 8" 2400 lb. CB-SC6ML 6" x 2" 8" 3600 lb. CB-726B* 6" x 2" 8" 2400 lb. CB-726ML* 6" x 2" 8" 3600 lb. *for use with 2 SC housings Drawers Drawers are welded heavy gauge steel, with full width handles with end caps and paper labeling strips with clear label covers. Drawers 100% Full Extension (440 lb./200kg maximum load capacity) USABLE HT. SIDEWALL HT. SC 2 1 8" (54mm) 2" (52mm) SC 3 1 8" (79mm) 3" (77mm) SC125F 4 1 16" (104mm) 3" (77mm) SC 5 1 16" (129mm) 5" (127mm) SC1 6 1 16" (154mm) 5" (127mm) SC 7 1 32" (179mm) 7" (177mm) SC225F 8" (203mm) 7" (177mm) SC250F 9" (229mm) 8 15 16" (227mm) SC300F 11" (279mm) 10 15 16" (277mm) SC350F 13" (329mm) 10 15 16" (277mm) Drawer Partitioning Standard Width interior sets, pages 22-23 Individual drawer partitioning accessories, pages 114-121 Shelves, Trays and Doors Shelves Made of steel sheet with reinforcing ribs welded on, shelves are 1" thick. Adjustable shelves fit into vertical supports with brackets, which are included. Usable width is 25 13 16". Color: gray. USABLE DEPTH DESCRIP. SC-AS 24 1 4" (616mm) adjustable shelf SC-BS 23 3 4" (604mm) bottom shelf Vertical Dividers for Adjustable Shelf HEIGHT VSD100/36 4" VSD150/36 6" Roll-Out Tray Roll-out trays are smooth without perforations and are heavy duty steel sheet for storing heavy parts. Trays have full length handles (same as drawers), galvanized insert panels, and 1 3 4" rear and side retaining walls, which are painted to match housing. Tray is 100% full extension. USABLE WIDTH USABLE DEPTH SC-TCF 24" (610mm) 24" (610mm) Frame Bases Used to raise height of Model 600 cabinets when used as workbench pedestals. Galvaneel steel base is recessed from cabinet front. Color: to match housing. Doors Information on doors can be found on page 30. HEIGHT RAISE 600 CABS. TO SC-2FB 2" (51mm) desk height SC-4FB 4" (102mm) low bench height SC-6FB 6" (152mm) standard bench height Tops To order cabinet tops, please see page 31. Counter tops can be found on page 107. 19
Standard Width Easy-Order Cabinet Combinations SWC750 Cabinets 33 1 2" high x 28 1 4" wide x 28 1 2" deep SWC900 Cabinets 39 3 8" high x 28 1 4" wide x 28 1 2" deep How to read the charts on this page The 2 columns to the right of each cabinet illustration indicate drawer heights and drawer interior sets. (For drawer capacities and sizes, see page 19.) Below the illustration, you will find part numbers, the number of drawers, and the number of drawer compartments created by the interior sets (shown on pages 22-23). 036 036 420 420 312 312 209 SWC750-1- - 9 - SWC750-1A - - 9 193 036 036 420 420 312 312 312 SWC900-1- - 11 - SWC900-1A - - 11 244 209 104 250F 104 250F 104 SWC900-5- - 4 - SWC900-5A - - 4 21 How to order a Standard Width Easy-Order Cabinet 1. Select Easy-Order Cabinet Combination either with or without drawer interior sets. An A at the end of the part number (i.e., SWC750-2A) designates that the cabinet comes with drawer interior sets (shown on pages 22-23). 2. Select lock type (box ). 3. Select base type (box ). 4. Select color(s) for housing and drawer fronts (see page 43 for color chart). 036 312 209 SWC750-2- - 7 - SWC750-2A - - 7 133 036 036 SWC900-2- - 9 - SWC900-2A - - 9 204 316 316 209 250F 104 SWC900-6- - 6 - SWC900-6A - - 6 85 Lock* N = none I = individual K = keyed-alike M = master * for lock options, see page 42 Base* N = none F = fork truck P = pallet truck * to order mobile bases for Standard Width cabinets, see page 19 312 312 209 209 209 SWC750-3- - 7 - SWC750-3A - - 7 91 312 312 312 209 209 SWC900-3- - 8 - SWC900-3A - - 8 114 TRAYS SWC900-7- - 3 door cabinet is 29 1 2" deep Select Color* * for color chart, see page 43 EXAMPLE: to order an SWC900-3A cabinet with an individual lock and a fork truck base, with a Bright Blue cabinet housing and Pearl Gray drawers, the part number would be SWC900-3A-I-F, and the paint color codes would be BB for the housing and PG for the drawer fronts. 209 104 104 SWC750-4- - 4 - SWC750-4A - - 4 29 316 316 209 209 104 SWC900-4- - 5 - SWC900-4A - - 5 54 209 250F 104 SWC900-8- - 7 - SWC900-8A - - 7 113 20
SWC1050 Cabinets 45 1 4" high x 28 1 4" wide x 28 1 2" deep SWC1225 Cabinets 52 3 16" high x 28 1 4" wide x 28 1 2" deep SWC1350 Cabinets 57 1 8" high x 28 1 4" wide x 28 1 2" deep 036 036 036 036 524 209 209 036 036 420 420 312 312 312 312 209 209 209 209 209 SWC1050-1- - 10 - SWC1050-1A - - 10 216 SWC1225-1- - 10 - SWC1225-1A - - 10 202 SWC1350-1- - 16 - SWC1350-1A - - 16 344 SWC1350-5- - 8 - SWC1350-5A - - 8 81 312 312 209 125F 420 316 316 209 209 524 524 312 312 312 209 209 209 209 104 104 SWC1050-2- - 8 - SWC1050-2A - - 8 106 SWC1225-2- - 8 - SWC1225-2A - - 8 114 SWC1350-2- - 13 - SWC1350-2A - - 13 252 SWC1350-6- - 7 - SWC1350-6A - - 7 67 209 209 125F 420 316 209 209 250F 104 209 250F 104 250F 104 209 SWC1050-3- - 6 - SWC1050-3A - - 6 66 SWC1225-3- - 6 - SWC1225-3A - - 6 62 SWC1350-3- - 9 - SWC1350-3A - - 9 118 TRAYS SWC1350-7- - 4 door cabinet is 29 1 2" deep 420 420 209 209 209 209 209 250F 104 300F 104 209 TRAYS SWC1050-4- - 3 door cabinet is 29 1 2" deep TRAYS SWC1225-4- - 3 door cabinet is 29 1 2" deep SWC1350-4- - 9 - SWC1350-4A - - 9 115 SWC1350-8- - 7 - SWC1350-8A - - 7 59 21
Standard Width Drawer Interior Sets How to order a Standard Width Drawer Interior Set To order the drawer interior sets shown on these pages, use the part number in the chart and add the drawer height. EXAMPLE: to order a DR312 drawer interior for a 100 height (3") drawer, the part ordering number would be DR312-100. DR104 4 11 1 2" DR206 6 7 1 2" DR211 11 7 1 2" DR3AD 4 5 1 2" 3 7 1 2" 2 9 1 2" DR312 12 5 1 2" DR316 16 5 1 2" DR319 19 5 1 2" For drawers 75 through 200 DR4AD 15 3 1 2" 11 5 1 2" DR406 2 5 1 2" 4 5 1 2" x 18" For drawers 75 through 200 DR425 20 4 1 8" 5 4 7 8" For drawers 75 through 200 DR518 18 3 1 2" For drawers 75 through 200 DR530 30 3 1 2" 22
For drawers 75 through 200 DR548 48 3 1 2" For drawers 75 through 150 DR712 6 3 1 2" 6 3 1 2" x 16" For drawers 75 and 100 DR818 18 2 1 8" For drawers 75 and 100 COMPTS. CMPT. SIZE DR016 16 6" x 6" For drawers 75 and 100 COMPTS. CMPT. SIZE DR024 16 3" x 6" 8 6" x 6" For drawers 75 and 100 COMPTS. CMPT. SIZE DR032 32 3" x 6" For drawer 75 COMPTS. CMPT. SIZE DR036 16 3" x 3" 16 3" x 6" 4 6" x 6" For drawer 75 COMPTS. CMPT. SIZE DR064 64 3" x 3" For drawer 75 DR162 38 2 3 4" For drawer 75 DR163 51 1 3 4" For drawer 75 DR164 64 1 1 4" For drawer 75 DR3PG 4 5 7 8" 23
Lista Mid-Width and Double Width Cabinets The benefits of these cabinets are a long story When you need to store tools and parts that are 24" in length or longer, or combine short and long items together, our Mid-Width and Double Width cabinets are the perfect option. These cabinets are ideal for special automotive tools, measurement devices and other longer items. MID-WIDTH CABINETS 47" WIDE x 28 1 /2" DEEP DOUBLE WIDTH CABINET 56 1 /2" WIDE x 28 1 /2" DEEP FOR EASY-ORDER COMBINATIONS: MID-WIDTH, PAGES 26-27 DOUBLE WIDTH, PAGES 28-29 Double Width cabinets at Sager Electronics are used to store fast moving parts like connectors, switches and semiconductors. One drawer can accommodate the same amount of inventory that it once took 11 shelves to handle. The fullextension feature enhances accessibility and enables employees to view the entire drawer contents. 24
Mid-Width and Double Width Custom Cabinet Options For directions on ordering custom cabinets and complete descriptions 42 13 16" (1088mm)* 64 UNITS 52 3 16" (1325mm)* 78 UNITS of the options on this page, please see pages 42-43. 24" (610mm)* 36 UNITS MID-WIDTH *usable inside dimensions DOUBLE WIDTH Cabinet Housings Housing vertical supports are slotted at 1" increments to allow drawers, shelves and rollout trays to be assembled in any sequence. Mid-Width Cabinet Housings 47" (1194mm) wide x 28 1 2" (725mm) deep MW300 MW450 MW600 MW750 MW900 MW1050 MW1225 MW1350 OVERALL HEIGHT (without base) 15 3 4" (400mm) 21 5 8" (550mm) 27 1 2" (700mm) 33 1 2" (850mm) 39 3 8" (1000mm) 45 1 4" (1150mm) 52 3 16" (1325mm) 57 1 8" (1450mm) Double Width Cabinet Housings 56 1 2" (1434mm) wide x 28 1 2" (725mm) deep DW300 DW450 DW600 DW750 DW900 DW1050 DW1225 DW1350 OVERALL HEIGHT (without base) 15 3 4" (400mm) 21 5 8" (550mm) 27 1 2" (700mm) 33 1 2" (850mm) 39 3 8" (1000mm) 45 1 4" (1150mm) 52 3 16" (1325mm) 57 1 8" (1450mm) Locks Cabinets come equipped with an individual lock and 2 keys. To select other locking options, please see page 42. Color To order cabinet housing and drawer paint colors, please see page 43. Bases Fork Truck Bases Galvaneel steel base has snap-on front and rear covers. Bases are pre-punched to allow stacking. Color: to match housing. HOUSING HEIGHT MW-FTB mid-width 2 3 8" (60mm) DW-FTB double width 2 3 8" (60mm) Pallet Truck Bases Base has snap-on front and rear covers. Color: to match housing. HOUSING HEIGHT MW-PTB mid-width 3 15 16" (100mm) DW-PTB double width 3 15 16" (100mm) Mobile Caster Base Base increases overall cabinet height by 8". See page 31 for other accessories. HOUSING CASTER CAP. CB-MW6ML mid-width 6" x 2" 3600 lb. CB-DW6ML double width 6" x 2" 3600 lb. Tops To order cabinet tops, please see page 31. Drawers Drawers are welded heavy gauge steel, with full width handles with end caps and paper labeling strips with clear label covers. Mid-Width Drawers 100% Full Extension (440 lb./200kg maximum load capacity) USABLE HT. SIDEWALL HT. MW 2 1 8" (54mm) 2" (52mm) MW 3 1 8" (79mm) 3" (77mm) MW125F 4 1 16" (104mm) 3" (77mm) MW 5 1 16" (129mm) 5" (127mm) MW1 6 1 16" (154mm) 5" (127mm) MW 7 1 32" (179mm) 7" (177mm) MW225F 8" (203mm) 7" (177mm) MW250F 9" (229mm) 8 15 16" (227mm) MW300F 11" (279mm) 10 15 16" (277mm) MW350F 13" (329mm) 10 15 16" (277mm) Double Width Drawers 100% Full Extension (440 lb./200kg maximum load capacity) USABLE HT. SIDEWALL HT. DW 2 1 8" (54mm) 2" (52mm) DW 3 1 8" (79mm) 3" (77mm) DW125F 4 1 16" (104mm) 3" (77mm) DW 5 1 16" (129mm) 5" (127mm) DW1 6 1 16" (154mm) 5" (127mm) DW 7 1 32" (179mm) 7" (177mm) DW225F 8" (203mm) 7" (177mm) DW250F 9" (229mm) 8 15 16" (227mm) DW300F 11" (279mm) 10 15 16" (277mm) DW350F 13" (329mm) 10 15 16" (277mm) Drawer Partitioning Mid-Width interior sets, page 27 Double Width interior sets, page 29 Individual drawer partitioning accessories, pages 114-121 Shelves, Trays and Doors Shelves Made of steel sheet with reinforcing ribs welded on, shelves are 1" thick. Adjustable shelves fit into vertical supports with brackets, which are included. Color: gray. Adjustable Shelves USABLE WIDTH USABLE DEPTH MW-AS 44 9 16" (1132mm) 24 1 4" (616mm) DW-AS 53 29 32" (1369mm) 24 1 4" (616mm) Bottom Shelves USABLE WIDTH USABLE DEPTH MW-BS 44 9 16" (1132mm) 23 3 4" (604mm) DW-BS 53 29 32" (1369mm) 23 3 4" (604mm) Vertical Dividers for Adjustable Shelves HEIGHT VSD100/36 4" VSD150/36 6" Roll-Out Trays Roll-out trays are smooth without perforations and are heavy duty steel sheet for storing heavy parts. Trays have full length handles (same as drawers), galvanized insert panels, and 1 3 4" rear and side retaining walls, which are painted to match housing. Tray is 100% full extension. USABLE WIDTH USABLE DEPTH MW-TCF 42 13 16" (1088mm) 24" (610mm) DW-TCF 52 3 16" (1326mm) 24" (610mm) Doors Information on doors can be found on page 30. 25
Mid-Width Easy-Order Cabinet Combinations MWC900 Cabinets 39 3 8" high x 47" wide x 28 1 2" deep MWC1225 Cabinets 52 3 16" high x 47" wide x 28 1 2" deep MWC1350 Cabinets 57 1 8" high x 47" wide x 28 1 2" deep How to read the charts on this page The 2 columns to the right of each cabinet illustration indicate drawer heights and drawer interior sets. (For drawer capacities and sizes, see page 25.) Below the illustration, you will find part numbers, the number of drawers, and the number of drawer compartments created by the interior sets (shown on page 27). How to order a Mid-Width Easy-Order Cabinet 1. Select Easy-Order Cabinet Combination either with or without drawer interior sets. An A at the end of the part number (i.e., MWC900-2A) designates that the cabinet comes with drawer interior sets (shown on page 27). 2. Select lock type (box ). 3. Select base type (box ). 4. Select color(s) for housing and drawer fronts (see page 43 for color chart). Lock* N = none I = individual K = keyed-alike M = master * for lock options, see page 42 DRW. LR415 LR415 LR415 LR415 MWC900-1- - 9 - MWC900-1A - - 9 114 DRW. MWC900-2- - 7 - MWC900-2A - - 7 78 DRW. 250F LR415 LR415 LR106 LR106 DRW. LR415 LR415 LR106 MWC1225-1- - 10 - MWC1225-1A - - 10 114 DRW. 125F DRW. 125F 250F 250F LR106 MWC1225-2- - 8 - MWC1225-2A- - 8 81 LR106 LR106 DRW. LR415 LR415 LR415 LR415 LR106 LR106 MWC1350-1- - 12 - MWC1350-1A - - 12 138 DRW. LR415 LR106 LR106 MWC1350-2- - 9 - MWC1350-2A - - 9 90 DRW. 250F 250F LR106 Base* N = none F = fork truck P = pallet truck * to order mobile bases for Mid-Width cabinets, see page 25 MWC900-3- - 5 - MWC900-3A - - 5 48 MWC1225-3- - 6 - MWC1225-3A - - 6 54 MWC1350-3- - 7 - MWC1350-3A - - 7 72 Select Color* * for color chart, see page 43 EXAMPLE: to order an MWC1225-2A cabinet with an individual lock and a fork truck base, with a Bright Blue cabinet housing and Pearl Gray drawers, the part number would be MWC1225-2A-I-F, and the paint color codes would be BB for the housing and PG for the drawer fronts. TRAYS MWC900-4- - 3 door cabinet is 29 1 2" deep TRAYS MWC1225-4- - 3 door cabinet is 29 1 2" deep TRAYS MWC1350-4- - 4 door cabinet is 29 1 2" deep 26
Mid-Width Drawer Interior Sets COMPARTMENTS CMPT. WIDTH MWDR203 3 14" COMPARTMENTS CMPT. WIDTH MWDR312 3 6 1 4" 9 11 1 2" How to order a Mid-Width Drawer Interior Set To order the drawer interior sets shown on this page, use the part number in the chart and add the drawer height. EXAMPLE: to order an MWDR-LR106 drawer interior for a 100 height (3") drawer, the part ordering number would be MWDR-LR106-100. COMPARTMENTS CMPT. WIDTH MWDR-LR106 6 11 1 2" COMPARTMENTS CMPT. WIDTH MWDR- 9 7 1 2" COMPARTMENTS CMPT. WIDTH MWDR- 12 5 1 2" For drawers 75 thru 150 COMPARTMENTS CMPT. WIDTH MWDR-LR415 9 3 1 2" 6 5 1 2" COMPARTMENTS CMPT. WIDTH MWDR420 4 6 1 4" 8 7 1 2" 8 7 1 2" For drawers 75 thru 150 COMPARTMENTS CMPT. WIDTH MWDR-LR518 18 3 1 2" 27
Double Width Easy-Order Cabinet Combinations DWC900 Cabinets 39 3 8" high x 56 1 2" wide x 28 1 2" deep DWC1225 Cabinets 52 3 16" high x 56 1 2" wide x 28 1 2" deep DWC1350 Cabinets 57 1 8" high x 56 1 2" wide x 28 1 2" deep How to read the charts on this page The 2 columns to the right of each cabinet illustration indicate drawer heights and drawer interior sets. (For drawer capacities and sizes, see page 25.) Below the illustration, you will find part numbers, the number of drawers, and the number of drawer compartments created by the interior sets (shown on page 29). How to order a Double Width Easy-Order Cabinet 1. Select Easy-Order Cabinet Combination either with or without drawer interior sets. An A at the end of the part number (i.e., DWC1225-2A) designates that the cabinet comes with drawer interior sets (shown on page 29). 2. Select lock type (box ). 3. Select base type (box ). 4. Select color(s) for housing and drawer fronts (see page 43 for color chart). Lock* N = none I = individual K = keyed-alike M = master * for lock options, see page 42 DRW. INT. LR415 LR415 LR415 LR415 DWC900-1- - 9 - DWC900-1A - - 9 114 DRW. INT. LR415 LR415 LR106 DWC900-2- - 7 - DWC900-2A - - 7 78 DRW. 250F INT. LR106 DRW. INT. LR415 LR415 LR415 LR106 DWC1225-1- - 10 - DWC1225-1A - - 10 114 DRW. INT. 125F DRW. LR106 DWC1225-2- - 8 - DWC1225-2A- - 8 81 INT. 125F 250F 250F LR106 LR106 DRW. INT. LR415 LR415 LR415 LR415 LR106 LR106 DWC1350-1- - 12 - DWC1350-1A - - 12 138 DRW. INT. LR415 LR106 LR106 DWC1350-2- - 9 - DWC1350-2A - - 9 90 DRW. INT. 250F 250F LR106 Base* N = none F = fork truck P = pallet truck * to order mobile bases for Double Width cabinets, see page 25 DWC900-3- - 5 - DWC900-3A - - 5 48 DWC1225-3- - 6 - DWC1225-3A - - 6 54 DWC1350-3- - 7 - DWC1350-3A - - 7 72 Select Color* * for color chart, see page 43 EXAMPLE: to order a DWC900-2A cabinet with an individual lock and a fork truck base, with a Bright Blue cabinet housing and Pearl Gray drawers, the part number would be DWC900-2A-I-F, and the paint color codes would be BB for the housing and PG for the drawer fronts. TRAYS DWC900-4- - 3 door cabinet is 29 1 2" deep TRAYS DWC1225-4- - 3 door cabinet is 29 1 2" deep TRAYS DWC1350-4- - 4 door cabinet is 29 1 2" deep 28
Double Width Drawer Interior Sets COMPARTMENTS CMPT. WIDTH DWDR203 3 17 1 4" COMPARTMENTS CMPT. WIDTH DWDR415 6 7 1 2" 9 11 1 2" How to order a Double Width Drawer Interior Set To order the drawer interior sets shown on this page, use the part number in the chart and add the drawer height. EXAMPLE: to order a DWDR-LR106 drawer interior for a 100 height (3") drawer, the part ordering number would be DWDR-LR106-100. COMPARTMENTS CMPT. WIDTH DWDR524 16 7 1 2" 8 9 1 2" COMPARTMENTS CMPT. WIDTH DWDR-LR106 6 11 1 2" COMPARTMENTS CMPT. WIDTH DWDR- 9 7 1 2" COMPARTMENTS CMPT. WIDTH DWDR- 12 5 1 2" For drawers 75 thru 150 COMPARTMENTS CMPT. WIDTH DWDR-LR415 9 3 1 2" 6 5 1 2" For drawers 75 thru 150 COMPARTMENTS CMPT. WIDTH DWDR-LR518 18 3 1 2" 29
Door Cabinets and Flush Doors There are a number of ways to customize your cabinet to address your specific needs. On these two pages, you ll find the various cabi- How to Order the Correct Height Door Remember that total drawer model numbers plus the door height (in millimeters) must add up to the model number of the housing. net doors, lock options and cabinet tops that are available for all Lista cabinets. Double Hinged Door Cabinets These units are complete cabinets with doors. Drawers, shelves or roll-out trays may be installed behind double hinged doors. Color choices are shown on page 43. Doors are provided with handle, individual lock and 2 keys. MP Width Double Hinged Door Cabinets (22 3 16" W x 29 1 2" D) MPDHD600 MPDHD750 MPDHD900 MPDHD1225 MPDHD1350 HEIGHT 27 1 2" (700mm) 33 1 2" (850mm) 39 3 8" (1000mm) 52 3 16" (1325mm) 57 1 8" (1450mm) Standard Width Double Hinged Door Cabinets (28 1 4" W x 29 1 2" D) SCDHD600 SCDHD750 SCDHD900 SCDHD1050 SCDHD1225 SCDHD1350 SCDHD1525 HEIGHT 27 1 2" (700mm) 33 1 2" (850mm) 39 3 8" (1000mm) 45 1 4" (1150mm) 52 3 16" (1325mm) 57 1 8" (1450mm) 64" (1625mm) HS Width Double Hinged Door Cabinets (40 1 4" W x 23 1 2" D) HSDHD600 HSDHD750 HSDHD900 HSDHD1225 HSDHD1350 HEIGHT 27 1 2" (700mm) 33 1 2" (850mm) 39 3 8" (1000mm) 52 3 16" (1325mm) 57 1 8" (1450mm) Mid-Width Double Hinged Door Cabinets (47" W x 29 1 2" D) Flush Doors Flush cabinet doors can be installed on cabinets of the widths and heights shown in the charts below. Doors are heavy gauge steel and close flush with the face of the housing. Doors can be installed to open to the left or the right. Color choices are shown on page 43. Door is provided with recessed handle, individual lock and 2 keys. Part number is for door only. Only bottom and adjustable shelves may be installed behind flush doors. NW Width Flush Cabinet Doors OPENS TO HEIGHT FD450-19R right 17 11 16" (450mm) FD450-19L left 17 11 16" (450mm) FD600-19R right 23 9 16" (600mm) FD600-19L left 23 9 16" (600mm) FD750-19R right 29 9 16" (750mm) FD750-19L left 29 9 16" (750mm) FD900-19R right 35 7 16" (900mm) FD900-19L left 35 7 16" (900mm) MP Width Flush Cabinet Doors OPENS TO HEIGHT FD450-27R right 17 11 16" (450mm) FD450-27L left 17 11 16" (450mm) FD600-27R right 23 9 16" (600mm) FD600-27L left 23 9 16" (600mm) FD750-27R right 29 9 16" (750mm) FD750-27L left 29 9 16" (750mm) FD900-27R right 35 7 16" (900mm) FD900-27L left 35 7 16" (900mm) EXAMPLE Model 900 Housing (1) 150 drawer = 150 (1) 750 door = 750 900 150 drawer FD750-19R door MWDHD600 MWDHD750 MWDHD900 MWDHD1225 MWDHD1350 HEIGHT 27 1 2" (700mm) 33 1 2" (850mm) 39 3 8" (1000mm) 52 3 16" (1325mm) 57 1 8" (1450mm) Double Width Double Hinged Door Cabinets (56 1 2" W x 29 1 2" D) DWDHD600 DWDHD750 DWDHD900 DWDHD1225 DWDHD1350 HEIGHT 27 1 2" (700mm) 33 1 2" (850mm) 39 3 8" (1000mm) 52 3 16" (1325mm) 57 1 8" (1450mm) Standard or ST Width Flush Cabinet Doors OPENS TO HEIGHT FD450-36R right 17 11 16" (450mm) FD450-36L left 17 11 16" (450mm) FD600-36R right 23 9 16" (600mm) FD600-36L left 23 9 16" (600mm) FD750-36R right 29 9 16" (750mm) FD750-36L left 29 9 16" (750mm) FD900-36R right 35 7 16" (900mm) FD900-36L left 35 7 16" (900mm) FD1050-36R right 41 5 16" (1050mm) FD1050-36L left 41 5 16" (1050mm) 30
Lock Options, Cabinet Tops and Mobile Accessories Lock Options Mobile Accessories Individual Drawer Latch (IDL) Individual drawer latches lock drawers closed for safety when moving. Particularly applicable for cabinets in vehicles, mobile cabinets, and where seismic activity is a consideration. Finger pull latch is recessed under the drawer handle. IDL can be added at any time. IDL Security Panel Individual locks for each drawer, with a central lock for the cabinet as a whole. Each drawer has a steel security panel between it and the drawer above, so contents are secure even when individual drawers have been removed. For ordering information, please consult Lista or your local distributor. Cabinet Tops For tops that cover more than 1 cabinet to form a continuous counter top, see page 107. Plastic Laminate Cabinet Tops Tops are 1 9 16" thick standard dove gray laminate over wood core and are flush to the cabinet side-to-side and front-to-back. NW1PCT NW2PCT MP1PCT MP2PCT SC1PCT MW1PCT SC2PCT FOR USE WITH 1 narrow width cabinet 2 narrow width cabinets 1 MP width cabinet 2 MP width cabinets 1 standard width cabinet 1 mid-width cabinet 1 double width cabinet Handles Handles can be mounted on the front of all Narrow and MP Width mobile cabinets. In mobile workcenters, handles are mounted on the side. Cabinets are pre-drilled and handles are mounted in the field. Hardware included. DESCRIPTION MTBH* tubular steel front-mount handles (pair) MHAN black plastic front-mount handles (pair) *not available for narrow width cabinets Lock-In-Lock-Out (LILO) LILO safety devices lock drawers in fully opened or fully closed positions. Latches are mounted on the lower right face of the drawer. Particularly suitable for vehicles, shipboard and other mobile applications. Available only for full extension drawers. Factory installed. LILO Hinged Locking Bars Hinged locking bar mounts to the left or right of any drawer cabinet on the vertical housing support. A padlock secures the bar. Particularly suitable for mobile applications or wherever additional security is desired. Can be retrofitted to existing cabinets. (Padlock not included.) FOR CAB. MODELS HLB300 300 HLB600 600 HLB750 750 HLB900 900 HLB1050 1050 HLB1225 1225 HLB1350 1350 HLB1525 1525 Retainer Tops with Mat Retainer top painted to match housing with raised edges on back and sides, provides a practical non-skid worksurface. Height is 3 4". Ribbed mat is included. NW-RT 2NW-RT MP-RT 2MP-RT SC-RT MW-RT DW-RT FOR USE WITH 1 narrow width cabinet 2 narrow width cabinets 1 MP width cabinet 2 MP width cabinets 1 standard width cabinet 1 mid-width cabinet 1 double width cabinet Maple Cabinet Tops Tops are 1 3 4" thick hard maple and are flush to the cabinet side-to-side and front-to-back. NW1WCT NW2WCT MP1WCT MP2WCT SC1WCT MW1WCT SC2WCT FOR USE WITH 1 narrow width cabinet 2 narrow width cabinets 1 MP width cabinet 2 MP width cabinets 1 standard width cabinet 1 mid-width cabinet 1 double width cabinet Phenolic Cabinet Tops Top is a high-pressure laminate designed for laboratory worksurfaces. Resistant to chemicals, stains or discoloration. Top is 1" thick phenolic resin, available in black. NW1RCT MP1RCT MP2RCT SC1RCT MW1RCT SC2RCT FOR USE WITH 1 narrow width cabinet 1 MP width cabinet 2 MP width cabinets 1 standard width cabinet 1 mid-width cabinet 1 double width cabinet Stainless Steel Cabinet Covers Cover is constructed of durable, heavy gauge stainless steel. Fits over top and rear of cabinet, and provides easy access to locking system. MP1SSC SC1SSC MW1SSC DW1SSC FOR USE WITH 1 MP width cabinet 1 standard width cabinet 1 mid-width cabinet 1 double width cabinet Folding Shelves Shelf can be mounted on either the left or right side of any mobile or stationary cabinet. 50 lb. maximum capacity. Shelf is 15" wide and 28 1 2" deep. DEPTH MOUNTS TO FS-36DX15-FSL 28 1 2" left side FS-36DX15-FSR 28 1 2" right side 31
Lista Shallow Depth Cabinets A new dimension in space savings and ergonomics Lista s shallow depth cabinets (ST Width and HS Width) provide the ultimate in space savings and ergonomic design. With their high density storage and shallow footprint, these cabinets are ideal for replacing shelves and maximizing floor space in narrow aisles or inside small trucks and vans under 24" deep counters. Our shallow depth drawer is the centerpiece of these remarkably efficient cabinets. Each drawer, while just 18" deep, provides storage for items of either 36" (HS) or 24" (ST) length. At Lista, we recognize the importance of ergonomic design. With 18" deep drawers, all items are within easy reach. In addition, drawer handles are located at the top of each drawer, reducing reach and strain. 32
With a footprint that is only 22 1 2" deep, Lista s shallow depth cabinets give you high density storage in the most confining workspaces. Shallow depth cabinets require only a 36" aisle to comfortably accommodate a fully extended drawer and the person accessing it. The shallow depth of these cabinets also makes them the perfect retrofit for shelving. Mobile shallow depth cabinets are an ideal means for transporting tools and parts through tight spaces. Aisle Width This overhead view shows two rows Lista s shallow depth cabinets save floorspace. They are 22 1 2" deep and only require a 36" aisle. ROW OF LISTA SHALLOW DEPTH CABINETS 22 1 2" of Lista shallow depth cabinets on either side of a comfortable 36" wide access aisle. The aisle leaves enough room for a fully extended drawer and Drawer Partitioning AISLE 36" 6' 9 " the person accessing it. The cabinets and aisle occupy a total depth of 6'9". The perforated drawer bottom allows for greater partitioning possibilities. This creates custom compartments for items up to 36" long (HS Width cabinet) and almost any shape. ROW OF LISTA SHALLOW DEPTH CABINETS 22 1 2" This overhead view shows two rows 18" Deep Drawer The 100% full extension drawer stores all items in comfortable radius of any worker s reach, making movements easy and natural. ROW OF FULL DEPTH CABINETS AISLE 28 1 2" 42" 8' 2 " of industry standard cabinets on either side of a 42" wide access aisle. This width aisle is required to accommodate a fully extended standard drawer and the person accessing it. The cabinets and aisle occupy a total depth of 8' 2". Recessed Handles Full width handles close flush with the face of the housing, preventing possible injury or the snagging of clothing. ROW OF FULL DEPTH CABINETS 28 1 2" 33