EDAU01-0713 Air Purifiers Engineering Data
TABLE OF CONTENTS 1 Features.......................... 2 Key Features....................... 2 Streamer Technology................. 2 Clean Air.......................... 2 2 Specifications...................... 3 Technical Specifications............... 3 Electrical Specifications................ 3 3 Dimensional Drawings.............. 4 Dimensional Drawings................ 4 4 Wiring diagrams................... 5 Wiring Diagrams Single Phase......... 5 1
Key Features Powerful air purification increases indoor air quality with Daikin Streamer technology Large air flow: 420m³/h in turbo mode Quiet operation: down to 16dBA sound pressure level Lightweight and compact Easy to clean flat panel 1 Daikin Streamer Technology Streamer Discharge is a type of plasma discharge in which high-speed electrons collide with oxygen and nitrogen molecules, which then become activated and capable of oxidative decomposition of bacteria. This type of discharge has the ability to eliminate bacteria and mould as well as hazardous chemical substances and allergens, etc. Compared to standard plasma discharge (glow discharge), the discharge range of Daikin s Streamer Discharge is wider, which makes it easier for electrons to collide with the oxygen and nitrogen molecules in the air. This enables activated molecules to be generated three dimensionally over a wide area, which results in an oxidative decomposition speed that is over 1,000 times greater with the same electrical power. Daikin s Streamer Discharge technology has proven successful in stably generating high-speed electrons, a feat that has been considered difficult up to now. Clean Air Clean air could be defined as having had all the harmful particles and contaminants removed, but Daikin goes beyond this. Our air purification technology is designed not only to remove and then decompose harmful particles, but also dust, odours, bacteria, pet hair, mould, pollen, mites, and other allergens, leaving it in a clean and healthy state. STREAMER DISCHARGE UNIT High-speed electrons are discharged that 1 enable decomposition and removal PREFILTER Dust is captured. Bacteria 2 and allergens are removed *2 3 PLASMA IONIZER Dust and pollen are electrically charged and then sent to the filter ELECTROSTAIC FILTER Dust and pollen are absorbed by 4 the electrostacially charged filter Odours and virues are kept under 5 control by photcatylist *3 TITANIUM APATITE FILTER DEODORISING CATALYST FILTER Formaldehyde 6 *4 and odours are decomposed *2 Conditions of experiment: Allergens were irradiated by Streamer Discharge and the breakdown of protein in the allergens was verified using either the ELISA method, cataphoresis, or an electron microscope. (Joint research with Wakayama medical University). *3 Measurement method: Virus removal test; Testing organisation: Kitasato Recearch Center for Environmental Science; Test result certificate 21_0026 (issued by same organisation); Result of experiment: 99.9% removeal. *4 Test method: constant generatioin method; Test room: 22 to 24 m 3 ; Temperature 23+/-3 ; Humidity: 50 +/- 20%; Ventilation condition: When concentration of 0.2 ppm is continually emanated, a removal capacity of 0.08 ppm is maintained at 36 m 3 /h, which is within the guideline of the Ministry of Health, Labour and Welfare (Japan). (This equates to the ventilation capacity of an approximately 65m 3 room.) 1
Specifications 2-1 Technical Specifications Applicable room area m² 46 Casing Colour White Height mm 576 Unit Width mm 403 Dimension Packed unit Depth mm 241 Height mm 615 Width mm 445 Depth mm 280 2 Weight Unit kg 8.5 Packed Unit kg 11 Type Multi Blade Fan (Sirocco fan with shroud assembly) Turbo m³/h 420 Fan Air Flow Rate Air Purifying Operation High m³/h 285 Medium m³/h 210 Low m³/h 130 Silent m³/h 55 Fan motor speed Drive Direct Drive Turbo dba 63 High dba 54 Sound power level Air filter Air purifying operation Deodorizing method Bacteria filtering method Dust collecting method Air purifying operation Power input Medium dba 47 Low dba 39 Silent dba 31 Polypropylene net Turbo kw 0.065 High kw 0.026 Medium kw 0.016 Low kw 0.010 Silent kw 0.007 Flash streamer / Titanium apatite photocatalytic filter / Deodorising catalyst Flash streamer / Titanium apatite photocatalytic filter Plasma ionizer / Electrostatic dust collection filter Safety devices Item 01 Safety switch (operation stops when the front panel opens) 01 Dust: 2 stage 02 Odour: 3 stages 03 Automatic operation (LL-H) 04 Airflow rate (LL/L/M/H) 05 Turbo mode (HH) Sign Item 06 Anti-pollen mode 07 Sleep mode 08 Lock (Anti-tamper) 09 Off timer (1.2.4h) 10 Maintance: filter replacement 11 Maintenance: Cleaning of ionization / streamer 12 - Standard Accessories : Operation manual; Quantity : 1; Standard Accessories : Photocatalytic pleated Filter; Quantity : 5; Standard Accessories : Wireless remote control; Quantity : 1; 2-1 Electrical Specifications Power cord m 2.0 Power supply Phase/Frequency/Voltage V 1~/50/220-240/ Running current Air purifying operation Turbo A 0.55 High A 0.25 Medium A 0.15 Low A 0.10 Silent A 0.08 Notes (1) Sound power levels are the average of values measured at 1m away from the front, left, right and top of the unit (this is equal to the value in an anechoic chamber). (2) Panel color: white; Display part color: silver
Dimensional drawings 3-1 Dimensional drawings 3 Required installation space (If installed on the table or the floor) Air outlet grille 100 or more Operation switch / stop button Filter reset button Signal transmitter 11 8 500 or more 500 or more 52 Dimension of remote controller (ARC458A7) 1000 or more 1000 or more Direction of blow Remote controller storage slot Handles Receiver Dust sensor Odor sensor 576 Power supply cord Plug type: C-Type Type or Cordage: H05WH2-F Cross Sectional Area: 0.75mm 2 Number of conductors: 2 Length outside machine: 2000 +/-50 Air inlet grille Manufacturer s label 4 395 4 230 11 3D069866
Wiring diagrams 4-1 Wiring Diagrams Single Phase 2 A3P H25P H11P H10P H21P H2P H3P H4P H5P H6P H7P H8P H9P H14P H15P H16P H17P BS1 H18P H19P H12P H13P H26P BS2 A4P Streamer part RED Ionization part CN1 Z2C N=3 A2P S1 1 6 1 3 1 4 1 14 6 S35 H10 S129 S401 10 10 A1P S11 10 POWER SUPPLY DC310 Out DC15V Out DC12V Out DC5V Out GND 1 1 S51 1 14 2 1 S127 14 S128 AC in 1 2 3 4 7 S2 BRN BLU 6 5 4 3 MS 3~ RED 1 M1F F1U 1 3 S8 BLK BLK Signal receiver Odor sensor NOTE: 1. S, CN shows a connector 2. Symbols shows as follows RED: Red BLK: Black : White YLW: Yellow : Green BLU: Blue PNK: Pink BRN: Brown ORG: Orange Z1C N=2 Infrared remote controller S1S 4 3 2 1 X1P 220-240v - 50Hz 220-230V - 60Hz H10 Buzzer 1 (Receiving sign) M1F Fan motor H6P LED (H:Green) H12P LED (Odor sign:green) H18P S1S Safety switch BS1 Main switch H7P LED (Turbo:Orange) H13P LED (Odor sign:yellow) H19P LED (Cleaning of ionization part:orange) LED (Cleaning of streamer part:orange) A1P A2P A3P Printed circuit board (For power supply) Printed circuit board (For high voltage power supply unit) Printed Circuit board (For display / control) BS2 Filter reset switch H8P LED (Anti-pollen:Green) H26P LED (Odor sign:red) H21P LED (Child lock:orange) H2P LED (Auto operation: Yellow) H9P LED (Sleep:Green) H14P LED (Cut off timer (1 hour):yellow) X1P Power supply plug H3P LED (LL:Green) H10P LED (Dust sign:green) H15P LED (Cut off timer (2 hour):yellow) Z1C Ferrite core A4P Dust sensor H4P LED (L:Green) H11P LED (Dust sign:yellow) H16P LED (Cut off timer (4 hour):yellow) Z2C Ferrite core F1U Fuse (250V, 3.15A) H5P LED (M:Green) H25P LED (Dust sign:red) H17P LED (Filter replacement:orange) 3D069834