Pumps Mixers Aeration Controls Services SCANPUMP SPLIT CASING PUMP Z22.

Pumps Mixers Aeration Controls Services SCANPUMP SPLIT CASING PUMP Z22.

SERIES Z22 - WHEN GOOD IS NOT ENOUGH. Since we delivered our first process pumps back in the 1870 s, our goal has been to optimize our customers processes by supplying extremely reliable and highly efficient solutions. 130 years later, our efforts are more intense than ever to provide non-stop reliability along with the lowest Life Cycle Costs on the market. Improvements in pump reliability and efficiency come from learning everything about your process as well as knowing everything there is to know about pumps. Our dedication, experience and process knowledge has kept us in the forefront of technology, the Z22 pumps are no exception to this dedication. 2

These two Z22 600/600-75 pumps are installed at Ringsjöholm raw water intake in Sweden. Wide range of applications Z22 pumps are at work in many demanding operations. They are trusted for pulp and paper production, in water and sewage works, district heating systems, power plants and other crucial applications. High reliability The Z22-pumps are extremely reliable. Many units have been in operation for several decades with only routine maintenance of bearings and shaft seals. Of course, operating environments vary so each pump faces different conditions, but the basic designs of the Z22 has proved itself day in and day out for years. The sturdy shaft/bearing construction ensures smooth running with very low vibrations. High efficiency Many of these pumps have a peak efficiency of over 90%. Each pump is tested to ISO 9906, Grade 2, or other agreed standard. Thanks to the replaceable wear rings, this high efficiency can be maintained through a pump s life. The Z22 series comprises of 25 sizes with different impeller design available. This flexibility ensures that energy consumption is minimised throughout a pump s complete operating range. Robust pump design Sturdy shaft/bearing construction ensures smooth running with very low vibrations. Low NPSH requirement Double-suction impellers have significantly lower NPSH requirements than single-suction impellers at the same capacity and speed. This makes the Z22 pumps perfect for difficult suction conditions and may offer reduced installation costs. The perfect fan pumps Fan pumps for paper machines require special impellers and features designed to meet stringent performance requirements. Certain sizes of the Z22 are perfectly suited for this application. More sizes. More flexibility All pumps can be installed horizontally or vertically and some can be supplied with right-angle connections. Various materials, different pressure ratings and alternative shaft seal designs are also available. For every application, there is a suitable version. Simplicity of service By lifting up the top casing half, the rotor can be removed without disturbing the pipework or motor. 3

THE Z22. DESIGNE OPTIMIZE TOU Pump casing The casing is axially split, which permits removal of the complete rotor without moving either the piping or the motor. Pumps generating high heads have double volutes to reduce radial forces, ensuring minimal shaft deflection and low bearing loads. Replaceable wear rings between the suction and discharge side enable high efficiency throughout the whole lifetime of the pump. High head pumps are also fitted with replaceable impeller wear rings. Impeller The closed impellers have double curved vanes for optimum flow conditions. The double suction design gives practically zero axial forces. Each impeller is statically and dynamically balanced according to ISO 1940, Grade 6.3. (For Fan pumps Grade 2.5). For each pump size there are normally two or more impeller variants available to best suit various applications. All sizes are available with mechanical seals and most sizes with gland packing. Double-suction impellers have lower NPSH requirements. The top casing half can easily be removed for inspection or service. Shaft and shaft sleeves The shaft deflection at the seal positions is less than 0.05 mm. At its entire length the shaft is protected by shaft sleeves, wich are O-ring sealed. Bearings Grease lubricated bearings are used. They are designed for a calculated bearing life of at least 50,000 hours, which is equivalent to 6 years continuous service. A deep groove single-row bearing is used at the drive end. A pair of matched angular contact ball bearings are used at the nondrive end. Deflectors and V-ring seals protect the bearings against moisture and dirt ingress both when running or at standstill. The bearing brackets are drilled as standard for SPM nipples and can also be fitted with temperature sensors. The rigid axial thrust bearing can take high axial loads, and the pumps can therefore be vertically mounted. Shaft seals All sizes can be supplied with mechanical seals and most sizes with gland packing. 4

D AND BUILT TO R PROCESS. Replaceable wear rings between the suction and discharge side enable high efficiency throughout the whole lifetime of the pump. Seal options To protect the shaft most of the pumps have shaft sleeves also outside the shaft seals. Mechanical seal of standard type for clean or slightly contaminated liquids at me dium inlet pressures. Balanced mechanical seal for clean or slightly contaminated media at higher inlet pressures and/or high temperatures. Mechanical seal with quench is suitable for corrosive or highly contaminated liquids and fibre slurries, e.g. paper stock. The double volute reduces radial forces on the impeller and consequently the bearing loads. Gland packing with or without lantern ring. Product recirculation or external sealing liquid can be used. 5

Properties Vertical versions Capacity 500-17000 m³/h. Motor on a tripod The motor is mounted on a tripod, and drive is via a cardan shaft to the stool-mounted pump. Head 10-200 m. Temperature Pressure Rating max.100 140 C depending on size and material. PN 6 to PN 25 owing to pump size and ma te ri al. See the adjacent table. Flanges ISO 7005 PN 10-PN 25 or ANSI 125-300. Lubrication Grease as standard. Motor on a higher floor The pump is mounted on a stool and the drive is via a cardan shaft. Installation versions Horizontal; Horizontal; Branches Branches In-line In-line Vertical; Branches In-line Horizontal; Branches at Right Angles Horizontal; Branches at 90 Vertical; Branches at 90 6

Sizes, pressure ratings. Installation, fan pump and shaft seal versions Size Max. Installation version FAN-pump Gland pressure versions packing PN versions *) Z22 250/200-40 16 Horizontal + vertical In-line Z22 350/300-35 16 Horizontal + vertical In-line Z22 400/300-55 18 Horizontal + vertical In-line 25** Horizontal + vertical 90 Z22 400/300-60 16 Horizontal + vertical 90 Z22 350/300-61 16 Horizontal + vertical In-line Z22 500/300-75 25 Horizontal + vertical 90 Z22 350/350-45 13 Horizontal + vertical In-line Z22 400/350-70 20 Horizontal + vertical In-line Z22 450/400-40 10 Horizontal + vertical In-line Z22 500/400-50 10 Horizontal + vertical In-line Z22 500/400-55 13 Horizontal + vertical In-line Z22 500/400-60 20 Horizontal + vertical In-line Z22 500/400-70 18 Horizontal + vertical In-line Z22 500/400-80 25 Horizontal + vertical In-line Z22 600/400-85 16 Horizontal + vertical 90 Z22 600/400-90 18 Horizontal + vertical 90 Z22 500/500-70 16/25** Horizontal + vertical In-line Z22 600/600-65 16 Horizontal + vertical In-line Z22 600/600-75 16 Horizontal + vertical In-line Z22 800/600-105 25 Horizontal + vertical In-line Z22 800/600-120 25 Horizontal + vertical In-line Z22 700/700-65 13 Horizontal + vertical In-line Z22 800/700-80 16 Horizontal + vertical In-line Z22 900/800-90 10/25** Horizontal + vertical In-line Z22 1000/1000-90 6 Horizontal + vertical In-line *) All pump sizes are available with mechanical seals. **) High pressure version. Type designations Z22 800/700-80 Impeller dia (cm) Outlet dia, DN2, (mm) Inlet dia, DN1, (mm) Pump series DN 1 DN 2 7

Materials Code 01 02 05 06 07 24 41 Pump casing Cast iron Cast iron Cast iron Nodular Nodular Stainless Bronze 0120 0120 0120 iron 0717 iron 0717 steel 2324 5444 Wear rings Cast iron Bronze Stainless Cast iron Bronze Stainless Bronze 0120 5204-15 steel 2324 0120 5204-15 steel 2324 5204-15 Impeller Cast iron Bronze Stainless Cast iron Bronze Stainless Bronze 0120 5444 steel 2324 0120 5444 steel 2324 5444 Shaft Steel Steel Stainless Steel Steel Stainless Stainless 1650/1672 1650/1672 steel 2324 1650/1672 1650/1672 steel 2324 steel 2324 Shaft sleeve Bronze Bronze Stainless Bronze Bronze Stainless Bronze 5204-15 5204-15 steel 2377/2348 5204-15 5204-15 steel 2377/2348 5204-15 ABS Equivalent grades material Germany USA UK France Chemical composition 0120 GG20 A48-30 B 1452/Gr.220 Ft 20D Cast iron 0717 GGG40 A536 60/40/18 2789 Gr.420/12 FGS 400-12 Nodular iron 1650 1.0542 AISI C1045 970 080 M46 CC 45 Steel 2324 1.4460 AISI 329 25Cr 5Ni 1.5Mo 0.10C 2348 1.4404 316L 3100 316C16 Z2 CND 17 17Cr 11 Ni 2.1Mo 0.03C 2377 1.4462 - - Z2 CND 22 22Cr SNi3.2 Mo 0.03C 1.0Si 5444 - B584-923 1400/LG4-C - 86Cu 9Sn 2Zn 3Pb 5204-15 CuSn5ZnPb B584-836 1400/LG2-C CuPb5Sn5Zn5 85Cu 5Sn 5Zn 5Pb 5444 B584-923 1400/LG4-C 86Cu 9Sn 2Zn 3Pb Performance curves m 200 100 50 40 30 20 10 350/300-61 250/200-40 350/350-45 350/300-35 350/300-35 400/350-70 450/400-40 500/300-75 450/400-40 500/400-50 750 r/min 500/400-80 500/400-50 500/400-70 500/400-55 600/400-90 700/700-65 750 r/min 800/600-120 800/600-105 500/400-60 600/400-90 400/300-60 400/300 (600/400-85) -55 800/700-80 () 600/600-75 500/400-55 500/500-70 1500 600/600 350/350-45 r/min -65 1000 900/800-90 r/min 750 r/min 700/700-65 1000/1000-90 600 r/min 1500 rpm 900/800-90 1000/1000-90 750 r/min 500 1000 5000 10000 20000 m 3 /h Head office Sweden Tel. +46 31 83 63 00 Fax +46 31 16 79 14 Subsidiaries, ABS Group Austria Tel. +43 2236 642 61 Fax +43 2236 642 66 Subsidiaries Denmark ABS Scanpump A/S Tel. +45 48 17 11 10 Fax+45 48 17 19 11 Finland Tel. +358 7 5324 0300 Fax +358 9 55 80 53 500 1000 5000 l/s France Tel. +33 4 72 31 00 06 Fax +33 4 78 05 57 74 Norway Tel. +47 67 55 47 00 Fax +47 67 55 47 50 Germany Tel. +49 6257 9317 0 Fax +49 6257 9317 99 Great Britain Tel. +44 1293 744 836 Fax +44 1293 543 392 600 rpm 750 rpm 1000 rpm 1500 rpm Netherlands Tel. +31 651 08 21 25 Fax +31 523 27 04 71 231643 GB 03.06 Scanpump reserves the right to alter specifications due to technical developments. Asia Pacific Singapore China Tel. +65 6463 3933 Tel. +86 21 68882900 wwww.abspumps.comqui Fax +65 6462 pati 2122 facissederae Fax hor +86 21 58826708 South and North America Brazil Tel. +55 41 2108-8100 Fax +55 41 3348 1879 USA Tel. +1 203 238 2700 Fax +1 203 238 0738