A FULLY INTEGRATED, OUT-THE-BOX WIRELESS SOLUTION

A FULLY INTEGRATED, OUT-THE-BOX WIRELESS SOLUTION

X-Series Accessories & Modules DEVELOPED BY Selectable supervision on panel and detector allows 5 levels of supervision to meet any install requirements IDS s Technology wireless technology is designed and manufactured in South Africa by IDS. Built for the X-Series panel range, it offers seamless integration of the world s best wireless detection technology into Africa s best-selling alarm. X-Series modular expansion enables ultimate flexibility for wired / wireless hybrid installs IN PARTNERSHIP WITH IDS, in partnership with OPTEX, is proud to announce the availability of the complete Wired and solution. Available on Africa's best selling alarm panels. IDS now stock OPTEX wireless detectors, OPTEX wired detectors and OPTEX low current detectors for both IDS805 and X-Series Comms bus supervised receiver enables reporting of tamper, supervision fail and low battery per zone Integrated system design from panel to transmitter by IDS gives total confidence in signal receipt X-Series simple scalability enables wireless installs up to 64 detectors, using 4 receivers Quick installs, total confidence with bus-managed receivers supporting 16 detectors each Advanced signal jamming detection capability ensures you can install wireless with total confidence 433Mhz frequency and local hardware design ensures optimum range and penetration for brick and concrete structures Introducing our fully integrated out-the-box wireless solution A complete range of devices meets any installation requirement. When you install with OPTEX, you partner with leaders in their field. technology has been developed for OPTEX detectors with the full support of OPTEX. The transmitters are manufactured and integrated with OPTEX detectors in IDS Durban factory, and the integrated product retains the original OPTEX factory warranty. For the first time in Africa, you can buy your favored OPTEX wireless detectors, with transmitters pre-installed. Intelligent transmitter design offers extended battery life Custom transmitter design and factory fitment in Optex s full range ensure no-hassle installs KEYPAD X-SERIES CONTROL PANEL X-Series Comms Bus XWAVE WIRELESS RECEIVER On Air Protocol XWAVE OPTEX

X-Series Protecting Your Future X-Series Accessories & Modules X-Series Control Panels IDS X-Series alarm control panels are the ideal security solution for residential and commercial environments, with a proven reputation for reliability and providing exceptional value in the industry. Offering an innovative range of wireless hybrid expansion, keypads and add on modules, it is the most versatile and cost effective security system in the market place today. IDS X16 CONTROL PANEL - 860-1-473-X16 8 Zones expandable to 16 zones IDS X64 CONTROL PANEL - 860-1-864-XS 8 Zones expandable to 64 zones X16 X64 Onboard Zones 8 8 Plug in Expander YES YES PROGRAMMABLE No activity arming No movement reporting Auto arm / disarm per partition Maintenance code Dynamic battery self test USER IDS s renowned one-button arming Three quick arm modes: (1) Stay, (2) Away, (3) Stay and go User programmable stay, buzz and chime profiles Easy cross partition control COMMUNICATION Contact ID / SIA / 4x2 Dual and split reporting Serial port for GPRS comms X-Series Expander Modules X-SERIES 8 ZONE PLUG IN EXPANDER MODULE - 860-06-X-08PI Simple expansion from zone 9 to 16 for the X16 and X64 control panels 8 wired, end-of-line supervised zone inputs Small footprint, easy install, plugs directly onto the motherboard X64 8 ZONE WIRED BUS EXPANDER MODULE - 860-06-X-08S 8 zone bus expansion module (max 6 per system) 8 wired, end-of-line supervised zone inputs 2 onboard programmable outputs Optional double end-of-line zone supervision X64 8 ZONE SMART BUS EXPANDER MODULE - 860-06-0536 8 zone bus expansion module (max 6 per system) 8 wired, end-of-line supervised zone inputs 2 onboard programmable outputs Optional double end-of-line zone supervision * Can be used even if smart power supply is not used Bus Expander - 6 Zone Support YES (16 zones) YES (64 zones) Keypads and Partitions 8 8 PGM Outputs (onboard / total) 5 / 13 5 / 25 User Codes 128 128 Event Buffer 1000 1000 Dialler Serial Port X-Series Keypads CURVE SERIES LCD KEYPAD - 860-03-0531 CURVE SERIES 16 ZONE LED KEYPAD - 860-03-XN16-IDS CLASSIC SERIES 16 ZONE LED KEYPAD - 860-03-XS16-IDS The X-Series keypads provide a modern, user friendly interface. Keypads can be mixed and matched using either a LCD keypad with a large LCD display, or a choice of 16 zone LED keypads for simple partition control. Multi-language (English, Afrikaans, Portuguese, Spanish, Greek, Italian) Up to 8 Keypads per system Fire / Panic / Medical Keypad tone and volume adjustable Programmable zone input per keypad Programmable output per keypad IDS s renowned one-button arming User programmable stay, buzz and chime profiles Easy Cross Partition Access Three Quick Arm modes: Stay, Away, Stay and Go Four user programmable Stay Profiles Zone Expander 860-07-563 The Zone Expander makes the X-Series control panels incredibly versatile, providing all the benefits of a fully supervised solution. transmitters are factory fitted into the complete range of OPTEX detectors. With its simple 4-wire bus connection, the receiver can be installed anywhere on the key bus to maximize range. Any combination of wired or wireless zones can be used making the X-Series control panels a true hybrid solution. X16-1 Receiver, 16 Detectors X64-4 Receivers, 64 Detectors Universal 8 Channel Receiver 860-07-589 The Universal Receiver, with 8 relay-driven outputs, integrates seemlessly into any control panels zone inputs, with full supervision. The quickest way to add OPTEX wireless detectors to any existing installation. All wireless detectors are fully supervised RF Jamming supervision Detector signal strength testing Approximate range of 100m line of sight between detectors and receiver Receivers can be installed anywhere on the bus to optimise installation effectiveness All programming done from the X-Series keypad or IDSwift2 Auto code learn 2 Onboard outputs transmitters are factory fitted into the complete range of OPTEX detectors 8 Channel connects to any control panels zones inputs 3 Trouble outputs for supervision of low battery, zone tamper and selectable RF jamming LED indicators per channel for zone trouble identification Easy detector enrollment Approximate range of 100m line of sight between detectors and receiver Ideal and convenient for adding OPTEX detectors to any new or existing installation IN PARTNERSHIP WITH

IDS Communications IDS Accessories X-SMS Module 860-36-0485 The X-SMS module enables simple end-user control of X-Series panels from any SMS-enabled device. It is custom-designed by IDS for the X-Series panel range, so it has only the features you really need, enabling simple programming, installation, and use. AlarmLink GPRS Communicator 860-454-01 GPRS-based alarm communication. We understand that alarm communications are the heart of your business and that absolute reliability and fanatical support is crucial to you. AlarmLink enhances this with our Smart Platform for full monitoring of units in the field. Controls the X-Series via any cellphone handset Simple SMS commands with confirmation replies Three levels of user authority: (1) Master / (2) User / (3) Reporting Arm / disarm with partition control Query system status / partition status Bypass and un-bypass zones Trigger outputs Customize labels (zone, site, partition) Query airtime and manage SMS Automatic network time update option Multiple free web apps to choose from Links with GPRS base station IDS serial port or PSTN terminal connections Full reporting of Contact ID via GPRS Over 99% Platform uptime since 01/01/2013 Heart beat polling linked to outage notifications Smart Platform access for unit management Data T&C apply Offsite log of events Available with either a Vodacom or MTN sim card X-Series Remote Transmitters 860-06-0011/0012/0014 Recently re-launched in a black polycarbonate offering new levels of robustness, with superb battery life. When used with an X-Series Remote Receiver it enables one to 1 functionality turning each button into a user code. X-Series Remote Receiver 860-07-02-DI The X-Series receiver allows for the X-Series to be controlled from an IDS remote transmitters. Multiple receivers can be placed anywhere on the bus. Each button can be allocated to a user code, enabling PGM Triggering, arm / disarm only, Arm by partition. Long range remote transmitters Robust keying design Smart management button Supports partition and stay arming Require firm press to activate, ensuring no false alarms Any button depressed for 3 seconds triggers a panic Up to 128 users - Full user identification 2 Relay outputs with 1A contacts for gate and garage control Any key held for more than 3 secs will trigger a panic alarm Selectable re-trigger protection to prevent accidental disarm Full set up is done from the keypad Unique one to 1 feature allows infinite flexibility AlarmLink VDOOR 860-454-VDOOR/MDOOR GPRS Communicator factory mounted onto an alarm door panel providing greater convenience and security. Full functionality of AlarmLink GPRS communicator Serial integration into IDS805s and X-Series panels Telephone dialler integration (into most other panels) Fitting is as simple as replacing alarm panel door X-SPS Smart Power Supply 860-01-0537 The X-SPS smart power supply module is designed for installation where additional supervised power is required, for either larger installations with multiple wired detectors, or for installations where the modules are installed in areas away from the control panel. 750mA Aux Power Supervision outputs for AC fail, low battery and auxiliary failure Requires a minimum of 30va 16V AC transformer and a 12V 7A hr battery Avoids groundloop on comms bus when implementing auxillary power on larger installs When used in conjunction with 860-06-0536 smart expander, provides comms-bus monitoring, and isolated, auxilliary power supply X-Series Voice Module 860-06-X64-0412 The voice module allows any touch-tone telephone to act as a keypad for your X-Series alarm system. Call in from any phone and enter your access code, and the voice module will provide voice prompts to retrieve the status of or control your panel. Also provides easy-to-understand voice-reporting of alarm events. Full panel control from any touch-tone phone Arm / disarm Bypass Check status Customised reporting by partition / user ProxSwitch Proximity Reader 870-625-10 The ProxSwitch is a weatherproof proximity switch that can be used on the X-Series to arm and disarm partitions or can be used to bypass zones. Simple standalone proximity switch IP65 weather proof rating 20 tag capacity Pulse or toggle replay Basic programming and setup

IDS Accessories Detectors IDSwift2 Software IDSwift2 up & download configuration software is an advanced Windows installation tool used for local and remote programming of the X-Series control panels. Windows graphic user interface Database drivers all pre-installed Require IDS modem to operate via Telephone Line: 860-36-0001 Fast USB direct connect, requires direct connect cable 860-320-01 Upgrade panel firmware version Download event log Download and upload panel programming Change panel status Create and manage unique system defaults Full user rights management & audit trail for control room applications Full customer management capability OPTEX VXI Detectors 862-01-VXI-R 862-01-VXI-RAM (with anti-masking) 862-01-DRAM (dualtech with anti-masking) 862-01-VXI-R-LC (low current - requires TX) Flexible enough to cater for most outdoor applications Outdoor wireless detector Low mount outdoor detector 5 Levels of Detection Length Adjustment 7 Horizontal Area Adjustments Double conductive shielding SMDA Logic for environmental noise immunity, with efficient energy management Advanced Temperature Compensation Logic OPTEX VXI Wired Detectors 862-01-VXI-ST 862-01-VXI-AM (with anti-masking) 862-01-VXI-DAM-XS (dualtech with anti-masking) IDS Modem 860-36-0001 IDS Modem, serial or USB connection for use with IDS control panels. IDS USB Direct Connect PC Link Cable 860-320-01 Connect directly to any X-Series panel using this simple interface, to upgrade firmware, download and amend programming, download event logs, and change panel status. X-Series Product Overview OPTEX BX80 Detectors 862-01-BX-80N 862-01-BX-80N-LC (low current - requires TX) Robust coverage of entrances on the side of a building Outdoor 24m long range PIR - 12m detection areas on both sides of detector Variable detection range from 2-12m on each side Double conductive shielding Advanced PIR technology creates a narrow, long detection area that protects wide horizontal areas Limited Detection Range Function - can be adjusted to avoid detecting unwanted objects Layered Detection Pattern that discriminates between large & small objects in the detection area OPTEX BX80 Wired Detectors 862-01-BX-80NC User Feature Programmable Feature Hardware Partitions Communication IDS s renowned one-button arming 3 Quick Arm Modes: Stay / Away / Sat & Go No Activity Arming Dynamic Battery self test 8 Partitions Contact ID / SIA / 4x2 No Activity Reporting Keypad Zone & Output Terminals Common Area Dual & Split Reporting OPTEX FTN Detectors 862-01-FTN-R, 5x1m 862-01-FTN-RAM, 5x1m (with anti-masking) 862-01-FTN-R-LC (low current - requies TX) OPTEX FTN Wired Detectors 862-01-FTN-ST, 5x1m 862-01-FTN-AM, 5x1m (with anti-masking) User Programmable Stay, Buzz & Chime profiles Auto Arm / Disarm per Partition EOL Resistor Tamper by Zone Cross Partition Access Serial Port for Communication 4 User Programmable Stay Profiles Toggle stay profiles from Stay to Night while armed Intuitive user menu Programmable Zone Types Zone Varification and Cross Zone Flexible programmable output options Programmable Zone Loop Response Time Positive Triggering PGM Outputs Excellent Lightning Protection Global Partition Control Outputs Programmable per Partition Multiple master code options for partition user management DTMF Comms with Voice Module SMS Comms with SMS Module GPRS Comms with GPRS Module Protect building entry points with this flexible short range passive detector Built in bracket 90 horizontal Dual element PIR IP55 and UV resistant ASA body Operating Temperature: -20 C to +60 C SMDA Logic Intelligent and Detection Logic Tolerance Active IR digital anti-masking

Detectors Detectors OPTEX HX40 Detectors 862-01-HX-40RAMC, 12x12m (with anti-masking) 862-01-HX-40RAM-LC (low current - requires TX) OPTEX HX40 Wired Detectors 862-01-HX-40C, 12x12m 862-01-HX-40AMC, 12x12m (with anti-masking) OPTEX LX Series Wired Detectors 862-01-LX-402C, Outdoor 12x15m 862-01-LX-802NC, Outdoor 24x2m OPTEX HX80 Detectors 862-01-HX-80NRAM, 25x2m (with anti-masking) 862-01-HX-80NRAM-LC (low current - requires TX) Outdoor corridor detector with exceptional range 3m High mount outdoor detector Multiple pattern detection area technology Pyro-element intelligent AND logic prevents false alarms caused by small animals IP55 and UV resistant ASA body Vegetation sway analysis logic Dual signal processing circuit automatically adjusts detection sensitivity preventing missed alarms in a hostile environment OPTEX Active IR Beams 862-01-AX-100TFRBEC, 30m Dual Beam 862-01-AX-100TFRC-LC, 30m Dual Beam (low current - requires TX) 862-01-AX-200TRFBEC, 60m Dual Beam 862-01-AX-200TRFC-LC, 60m Dual Beam (low current - requires TX) 862-01-SL-350QNRC, 100m Dual Beam 862-01-SL-350QNRC-LC, 100m Dual Beam (low current - requires TX) Accurate point to point perimeter protection where cabling is problematic Infrared beam interruption detection Interruption period - variable between 50, 100, 250, 500msec (4 steps) Triple tamper functions 99% Beam blocking stability High grade aspherical lens Battery saving timer D.Q. circuit (environmental disqualification) Long life battery operation (with four SAFT LSH20 batteries) OPTEX HX80 Wired Detectors 862-01-HX-80NC, 25x2m 862-01-HX-80NAMC, 25x2m (with anti-masking) Volumetric detection ideal to trigger lightning or CCTV video recording High mount outdoor detector Selectable detection patterns ( Alley or Multi-Level) Area-masking strips Day and Night modes Selectable pulse count (test or 2) Door Contact 860-07-587 Small slimline design with excellent range Built-in reed switch with magnet LED on / off selectable Fully supervised Small elegant design Universal Transmitter 860-07-588 Universal transmitter with great flexibility 12vdc voltage input Fully supervised Jumper selectable open or open / close status OPTEX Wired Dual Infrared Beams 862-01-AX-70TNC, 20m Dual Beam 862-01-AX-130TNC, 40m Dual Beam Accurate point to point perimeter protection Infrared beam interruption detection Interruption period - variable between 50, 100, 250, 500msec (4 steps) 99% Beam blocking stability 4 Selectable beam frequencies High grade aspherical lens

Detectors Detectors OPTEX Wired Indoor Commercial Detectors 862-01-CDX-AM 15x15m (with anti-masking) 862-01-CDX-NAM 24x2m (with anti-masking) 862-01-CDX-DAM 15x15m Dual Tech (with anti-masking) Commercial grade detectors for high security application Quad zone logic Double conductive shielding Digital active IR anti-masking Advanced temperature compensation logic Grade 3 detectors OPTEX Wired Compact Indoor PIR 862-01-RXC-ST, 12x12m 862-01-RXC-DT-X5, 12x12m Dual-Tech High performance with small animal immunity Quad zone logic with digital target recognition for small animal tolerance Improved RF and white light immunity Advanced temperature compensation logic Improved RF and white light immunity OPTEX Indoor Long Range PIR 862-01-CX-702RSC, 45x2.4m or 21x21m OPTEX Wired Indoor Long Range PIR 862-01-CX-702C, 45x2.4m or 21x21m Industrial or commercial applications where detection range trumps aesthetics. Warehouse / Factories. Multi-focus technology Double conductive shielding 3-step Lens angle adjustment OPTEX Indoor 360 PIR 862-01-WFX-360-1B, 12m 360 Ceiling Mount OPTEX Wired Indoor 360 PIR 862-01-FX-360, 12m 360 Ceiling Mount Optimal coverage of large open areas, particularly in commercial or industrial applications Spherical Lens Design Temperature compensation Noise reduction circuit Selectable Pulse Count: 2 or 4 OPTEX Indoor PIR 862-01-WNX-40PI-T, 12x12m Pleasing aesthetics and solid detection performance suitable for standard and indoor domestic and commercial installations, including those with small pets Quad zone logic with digital target recognition for small animal tolerance Improved RF and white light immunity Advanced temperature compensation logic Improved RF and white light immunity OPTEX Indoor PIR 862-01-EX-35RC, 11x11m or 17x1.7m Highly stable internal detector providing either wide angle or long range flexibility and exceptional value Selectable Dual-Purpose Spherical Fresnel Lens: Wide angle or long range Patented Multi-Focus Lens Selectable Multilevel & Alley detection patterns Selectable Pulse Count: 2 or 4 OPTEX Wired Indoor 360 High Mount PIR 862-01-SX-360Z, 18m 360 Ceiling Mount High mount commercial with unsurpassed coverage Circular detection area with 726 Dense zones Multilevel detection pattern Flexible pattern adjustment with Zoom function (Patent listed) Up to 5 meter mounting height

Product Overview Product Overview Product Code Detector Range Detector Type Indoor Outdoor Small Tolerant Mounting Height Active IR Microwave Antimask Battery type Battery Quantity Batteries supplied Current standby Current transmitting Approximate Battery Life (50 triggers per day) Product Code Detector Range Detector Type Indoor Outdoor Small Tolerant Mounting Height Active IR Microwave Antimask Battery type Battery Quantity Batteries supplied Current standby Current transmitting Approximate Battery Life (50 triggers per day) 860-07-587 860-07-588 862-01-VXI-R Door contact Universal transmitter XWAVE TRANSMITTERS CR123 1 13uA 10mA 2 yrs VXI OUTDOOR DETECTORS 13uA 10mA 0.8-1.2m 12uA 2 yrs 862-01-VXI-R-LC Requires TX 0.8-1.2m AA 2 12uA 12mA 862-01-VXI-RAM 862-01-VXI-RDAM-X5 0.8-1.2m AA 2 13uA 12mA 2 yrs 0.8-1.2m AA 2 21uA 15mA 2 yrs 862-01-VXI-ST Wired 0.8-1.2m 20mA 2 yrs 862-01-VXI-AM Wired 0.8-1.2m 24mA 2 yrs 862-01-VXI-DAM-X5 Wired 0.8-1.2m 35mA 2 yrs 862-01-BX-80NRC 24m BX OUTDOOR DETECTORS 0.8-1.2m AA 2 15uA 10mA 2 yrs 862-01-BX-80NRC-LC 24m Requires TX 0.8-1.2m 15mA 862-01-BX-80NC 24m Wired 0.8-1.2m 35mA 2 yrs 862-01-HX-40RAMC HX OUTDOOR DETECTORS 2.5-3.0m CR123 3 33uA 11mA 2 yrs 862-01-HX-40RAMC-LC Requires TX 2.5-3.0m 33uA 862-01-HX-40C Wired 2.5-3.0m 35mA 2 yrs 862-01-HX-40AMC Wired 2.5-3.0m 40mA 2 yrs 862-01-HX-80NRAM 25 x 2m 2.5-3.0m CR123 3 30uA 11mA 2 yrs 862-01-HX-80NRAM-LC 25 x 2m Requires TX 2.5-3.0m 30uA 862-01-HX-80NC 25 x 2m Wired 2.5-3.0m 35mA 2 yrs 862-01-HX-80NAMC 25 x 2m Wired 2.5-3.0m 40mA 2 yrs 862-01-FTN-R 5 x 1m FIT OUTDOOR DETECTORS 0.8-1.2m CR123 1 12uA 10mA 2 yrs 862-01-FTN-R-LC 5 x 1m Requires TX 0.8-1.2m 12uA 862-01-FTN-RAM 5 x 1m 0.8-1.2m CR123 1 13uA 10mA 2 yrs 862-01-FTN-ST 5 x 1m Wired 0.8-1.2m 20mA 2 yrs 862-01-FTN-AM 5 x 1m Wired 0.8-1.2m 20mA 2 yrs 862-01-LX-402C 12 x 15m Wired 862-01-LX-802NC 24 x 2m Wired 862-01-AX-100TFRBEC 30m LX OUTDOOR DETECTORS AX OUTDOOR BEAMS 1.2-2.5m 25mA 2 yrs 1.2-2.5m 25mA 2 yrs 0.8-1.2m LSH20 4 623uA 10mA 3 yrs 862-01-AX-100TFRC-LC 30m Requires TX 0.8-1.2m LSH20 4 623uA 862-01-AX-200TFRBEC 60m 0.8-1.2m LSH20 4 810uA 10mA 3 yrs 862-01-AX-200TFRC-LC 60m Requires TX 0.8-1.2m LSH20 4 810uA 862-01-SL-350QNRC 100m 0.8-1.2m LSH20 4 810uA 10mA 3 yrs 862-01-SL-350QNRC-LC 100m Requries TX 0.8-1.2m LSH20 4 810uA 862-01-AX-70TNC 40m Wired 0.8-1.2m 38mA 3 yrs 862-01-AX-130TNC 40m Wired 0.8-1.2m 41mA 3 yrs 862-01-EX-35RC 862-01-WNX-40PI-T 11 x 11m 17 x 1.7m Xave Xave OPTEX INDOOR DETECTORS 1.5-2.4m CR123 1 10uA 13mA 2 yrs 1.5-2.4m CR123 1 10uA 13mA 2 yrs 862-01-RXC-ST Wired 1.8-2.4m 13mA 2 yrs 862-01-RXC-DT-X5 15 x 15m Wired 1.8-2.4m 15mA 2 yrs 862-01-CDX-AM 15 x 15m Wired 1.8-2.4m 17mA 2 yrs 862-01-CDX-DAM 15 x 15m Wired 1.8-2.4m 20mA 2 yrs 862-01-CDX-NAM 24 x 2m Wired 1.8-2.4m 20mA 2 yrs 862-01-CDX-702RSC 862-01-CX-702C 45 x 2.4m 21 x 21m 45 x 2.4m 21 x 21m Wired 1.5 x 3.6m CR123 2 10uA 10mA 2 yrs 1.5 x 3.6m 8mA 2 yrs 862-01-FX-360 12m Wired 2.4-3.6m 17mA 2 yrs 862-01-WNX-360-1B 12m 2.4-3.6m CR123 1 10uA 13mA 2 yrs 862-01-SX-360Z 18m Wired 2.4-5.0m 13mA 2 yrs