IRRIGATION EQUIPMENT LTD. The Perfect Solution for Water Filtration and Irrigation Problems

IRRIGATION EQUIPMENT LTD. The Perfect Solution for Water Filtration and Irrigation Problems ODIS Filtration is The Heart of Every Irrigation System 12

TABLE OF CONTENTS Manifolds & Accessories... 2 Series 9000 End Connections... 2 Protective Coating... 2 Complete Filtration Arrays... 3-4 Stationary arrays Mobile arrays OdisMaticd Electric Filter 5 Series 863R Series 862R OdisMaticd Hydraulic Filter 6-7 Series 850 Series 851/851B Series 852R Series 853R Gravel / Sand Filters.. 8 Series 00 Hydrocyclone Sand Separators... 8 Series 5000 Automatic Self Cleaning Filters 9 Series 3000 Series 00 Manual & Automatic Brush Filters... 10 Series 8 Series 841 Manual Suction Filter 11 Series 842 Water Filters... 11 Series 1900 Water Filters... 12 Series 1000 & 00 Series 7000 Preliminary Suction Strainers... 13 Series 181 Series 184 Disc Filters... 14 Series 1500 Series 1700 Series 2500 Series 2600 Series 2100 Gravity Filter... 15 series 188 Fertilizing Equipment... 15 Series 6000 Series 653 Fertigation pump Manifolds & Accessories Series 9000 ODIS manifolds series 9000, and accessories are specifically designed for easy and modular installation of filter arrays. Flexible planning and easy installation of large and small filter arrays. Arrays can be modified by adding filters and manifolds Manifolds are designed for optimal head loss. Large variety of standard manifolds covers the various configurations of ODIS arrays. Other manifolds can be manufactured to order. End Connections ODIS filters, manifolds and accessories are available in three end connections: Victaulic (V) Threaded (M) Flanged (F) Protective Coating All ODIS products have a 1 micron extra-durable polyester coating, applied electrostatically and ovencured on a zinc-phosphate layer for maximal anticorrosion protection. ODIS can manufacture to order other system configurations or products, in some cases at no additional cost. Aimed at continued improvement, ODIS reserves the right to change specifications without prior notice. 2

Complete Filtration Arrays STATIONARY ARRAYS ODIS offers a large variety of arrays (filtering stations), based on standard ODIS products connected with ODIS manifolds. ODIS array is a complete filtering system. It includes filters, manifolds, valves, couplings, PE pipes and accessories, supporting legs, controller for automatic system etc.. The OdisMatics arrays provide the perfect solution for water containing large quantities of dirt. The OdisMatics arrays are based on automatic self cleaning screen filters, and maintain high filtering efficiency at any flow rate. Type Typical Arrays Gravel Filter Arrays Arrays with Hydrocyclones Array Designation Various Average rate 04-4242-01-19904-L 05-4242-01-19904-L 100 07-4242-01-196-L 1 05-4363-01-196-L 0 06-4363-01-198-W 08-4363-01-198-W 10-4363-01-19810-W 250 3 4 05-4484-01-198-L 350 06-4484-01-19810-W 07-4484-01-19810-W 09-4484-02-198-W 10-4484-02-198-W 14-4484-02-19810-W 4 500 630 700 1000 01-560-05-4242-L 100 01-52460-05-4363-L 0 02-52460-06-4484-W 0 Modularity - the modularity and combination of ODIS products enable an optimal solution for any irrigation application, based on standard products. The integration of ODIS standard products, enhances flexibility and facilitates any future enlargement or modifications of the arrays. ODIS can manufacture to order other system configurations or products, in some cases at no additional cost. 3

Complete Filtration Arrays ODIS offers a large variety of Mobile Arrays: The arrays are skid mounted on a steel pallet, and can be transferred from one location to another. The arrays combine high quality filtration, reliability, simple operation and mobility. As a result the price per m 3 /h of filtered water is the lowest. The arrays have a standard inlet and outlet and can be easily and quickly connected to the water source. Gravel Filters Arrays are most effective for filtration of water heavily contaminated with algae, organic matter and suspended solids (reservoirs, waste water, rivers, etc). MOBILE ARRAYS Modular arrays which combine standard ODIS products, provide optimal solution for any irrigation application. The Modular arrays are fully automatic systems. These mobile arrays can be supplied skid mounted. The array can contain one or more skids, requiring minimal on-site assembly and installation work. Another option ODIS offers is a completely Modular array built and delivered in ISO container. These mobile arrays are convenient for transportation and require minimal on-site assembly and installation work. MA2- MA2- MA2-60 Backflushing flow rates: 23-26 m³/h No. of Media Filters 4242 1 2 3 Average rate 60 Hydrocyclone Arrays are most effective for water containing large quantities of sand and suspended solids. These arrays are operated by time based controller. Specifically designed for wells and boreholes. MA58-0100 MA58-025035 MA58-035050 MA58-0500 MA58-100160 MA58-160250 Inlet Average rate 11-17 25-35 35-50 50-100-160 160-250 4

Series 863R d OdisMatic Electric Filter Patent Application IS 165676 US 11/273669 11/843710 This automatic screen filter is a self cleaning electrically operated filter designed for irrigation, industry and recycling applications. The collector assembly is driven by unidirectional electrical motor connected to a reversing direction shaft that enables a continuous linear movement (back and forth) of the collector assembly. The Self Adjusting suction nozzles' (patent pending) unique design increases the suction efficiency and decreases significantly the water consumption during flushing. The combination of the new trouble free drive system with the S.A suction nozzles creates an efficient self-cleaning collector assembly for heavy-duty operation. The cleaning process can be activated automatically by a controller or manually. For extremely heavy dirt load and difficult working conditions series 860 is available. High screening efficiency due to stainless steel sintered filter element. Continuous linear movement of the self cleaning mechanism. Efficient fully automatic self-cleaning mechanism Heavy-duty trouble free operation. Economical electrical motor. Greater suction ability due to the S.A suction nozzles. Significantly decreased water consumption during flushing. Filtered water supply is not interrupted during flushing Simple and reliable control system. Low cost per cubic meter of filtered water. Long service life thanks to anti corrosion protection coating and non corrosive materials. Series 862R Patent Application IS 165676 US 11/273669 11/843710 This automatic screen filter is a self cleaning electrically operated filter designed for irrigation, industry and recycling applications. Series 862R can handle water containing high dirt load at high flow rates. The collector assembly is driven by unidirectional electrical motor connected to a reversing direction shaft which enables a continuous linear movement (back and forth) of the collector assembly. The Self Adjusting suction nozzles' (patent pending) unique design increases the suction efficiency and decreases significantly the water consumption during flushing. The combination of the new trouble free drive system with the S.A suction nozzles creates an efficient economical collector assembly for heavy-duty operation. The cleaning process can be activated automatically by a controller or manually. High screening efficiency due stainless steel sintered filter element. Specially effective for high flow rates and high load of dirt. Continuous linear movement of the self cleaning mechanism. Efficient fully automatic self-cleaning mechanism Heavy-duty trouble free operation. Economical electrical motor. Greater suction ability due to the S.A suction nozzles. Significantly decreased water consumption during flughing. Simple and reliable control system. Low cost per cubic meter of filtered water. Long service life thanks to anti corrosion protection coating and non corrosive materials. 863R02 863R03 863R04 863R06 863R08 25 150 300 863R10 10" 0 Flushing 8 8 10 10 12 12 2500 2500 00 00 6000 6000 863R12 1 470 14 00 863R14 1 550 14 00 Flushing 862R12 862R14 1 1 600 0 862R16 1 1000 862R18 1 1300 862R " 1600 10050 10050 10050 16150 16150 5

OdisMatic Hydraulic Filter d Series 851/851B This compact automatic screen filter, hydraulically operated, is a perfect solution for use without power supply in irrigation, industry and recycling. The filter has a specially effective suction nozzles system for cleaning the screen. The self-cleaning mechanism is hydraulically operated by the in line water pressure. The cleaning process can be activated automatically or manually. During flushing cycle the suction nozzles scan the entire screen's inner surface in a helical movement. Series 850 This automatic screen filter, hydraulically operated, is a perfect solution for use without power supply in irrigation, industry and recycling. The filter has a specially effective suction nozzles system for cleaning the screen. The self-cleaning mechanism is hydraulically operated by the in line water pressure. The cleaning process can be activated automatically or manually. During flushing cycle the suction nozzles scan the entire screen's inner surface in a helical movement. High screening efficiency due to its unique stainless steel sintered filter element. Low minimum operating pressure. The compact design allows installation in limited space. Low head-loss. Efficient fully automatic self-cleaning mechanism. Filter uses small quantities of water to flush the screen. Filtered water supply is not interrupted during flushing. Simple and easy to operate. Low maintenance cost. Low cost per cubic meter of filtered water. Long service life thanks to anti corrosion protection coating and a non corrosive materials. High Reliability: Maintains high filtering efficiency. Low head-loss. Efficient fully automatic self-cleaning mechanism. Filter uses small quantities of water to flush the screen. Filtered water supply is not interrupted during flushing. Simple and easy to operate. Low maintenance cost. Low cost per cubic meter of filtered water. Long service life thanks to anti corrosion protection coating and a non corrosive materials. Flushing rate rate 85107 ¾" 4 2-3 85101 1" 7 2-3 851B15 1½" 15 4-5 851B02 25 4-5 270 270 850 850 851B03 4-5 1450 851B04 4-5 1450 851B04L 8-10 2360 85106 150 8-10 4500 85108 300 12-14 60 85002-IE/PE 85003-IS/PS 85003-IE/PE 85004-IS/PS 85004-IE/PE 85006-IE/PE 85008-IS/PS 85008-PE 85010-IS/PS 85012-IS/PS 85014-IS/PS 85016F-PS 10" 1 1 1 25 150 300 300 0 600 900 1100 Flushing 18-24 18-24 18-24 28-34 27-36 27-36 27-36 36-48 27-36 36-48 36-48 36-48 5 5 2150 1100 4300 4300 4300 6550 5750 8550 9650 9650 6

Series 852R This automatic screen filter is a self cleaning hydraulically operated filter designed for use in irrigation, industry and recycling. The filter is a perfect solution for use in places without electricity. Series 852R can handle water containing high dirt load at high flow rates. The collector assembly is driven by hydraulic motor connected to a reversing direction shaft which enables a continuous linear movement (back and forth) of the collector assembly. New design suction nozzles reduce water consumption during flushing. The combination of continuous cleaning ability and the new design suction nozzles creates an efficient economical self-cleaning assembly for heavyduty operation. The cleaning process can be activated automatically by a controller or manually. OdisMatic Hydraulic Filter d High screening efficiency due to stainless steel sintered filter element. Specially effective for high flow rates and high load of dirt. Continuous linear movement of the self cleaning mechanism. Efficient fully automatic self-cleaning mechanism hydraulically operated Heavy-duty trouble free operation. No limitation in flushing duration. Reduced water consumption during flushing. Filtered water supply is not interrupted during flushing Simple and reliable control system. Low cost per cubic meter of filtered water. Long service life thanks to anti corrosion protection coating and non corrosive materials Series 853R This automatic screen filter is a self cleaning hydraulically operated filter designed for use in irrigation, industry and recycling. The filter is a perfect solution for use in places without electricity. Series 853R introduces a new revolutionary perception in the field of the feld of the self cleaning hydraulic filters. The collector assembly is driven by hydraulic motor connected to a reversing direction shaft which enables a continuous linear movement (back and forth) of the collector assembly. New design suction nozzles reduce water consumption during flushing. The combination of continuous cleaning ability and the new design suction nozzles creates an efficient economical self-cleaning assembly for heavyduty operation. The cleaning process can be activated automatically by a controller or manually. High screening efficiency due to stainless steel sintered filter element. Continuous linear movement of the self cleaning mechanism. Efficient fully automatic self-cleaning mechanism hydraulically operated Heavy-duty trouble free operation. No limitation in flushing duration. Reduced water consumption during flushing. Filtered water supply is not interrupted during flushing Simple and reliable control system. Low cost per cubic meter of filtered water. Long service life thanks to anti corrosion protection coating and non corrosive materials 852R12 852R14 852R16 852R18 852R 1 1 1 1 " 600 0 1000 1300 1600 Flushing 23 23 23 23 23 Flushing 853R02 25 11 2500 10050 10050 10050 16150 16150 853R03 853R04 853R06 853R08 853R10 853R12 853R14 10" 1 1 150 300 0 470 550 11 16 16 22 22 28 28 2500 00 00 6000 6000 00 00 7

Gravel / Sand Filters ODIS series 00 gravel or sand filters, are most efficient for the filtration of water heavily contaminated with algae, organic matter and other impurities, such as in open reservoirs and recycled water systems. Series 00 filters use a unique design based on a bottom double-chamber, divided by a steel plate covered by "mushroom" diffusers. These diffusers disperse water evenly, using effectively the whole filter's volume, and avoiding the occurrence of channeling or caking. Series 00 filters are particularly suitable for backflushing. Hydrocyclone Sand Separators Series 00 Series 5000 Registered Patent ODIS hydrocyclones series 5000, are extremely efficient separators of sand and solid particles from water or liquids, maintaining a small head loss. Series 5000 hydrocyclones use a tangential injection flow process, enhancing the centrifugal forces and moving solid particles outwards. The dispersed particles, move downwards in a spiral path into an underflow chamber, while purified liquid moves upwards to the center of the spiral, towards a top mounted outlet. Specially designed Rubber Insert (Registered Patent) protects the cone against erosion and increases separation efficiency. Series 5000 hydrocyclones are mainly intended for agricultural applications and erosion protection of pumps, valves, etc., especially in wells. Body Recom. (m 3 ) 4121 1" 1 3.5-6 42 0.14 4162* 1 42 43 4242 " " 2 9 10 14-18 - 18-28 70 75 90 0.31 0.42 0.60 4243 2 14-28 90 0.60 4303 30" 21-42 135 0.70 4363 3 36-62 185 1.15 4484 4 62-1 310 1.90 4604 60" - 150 430 3.46 4363U 3 36-62 0 1.90 4484U 4 62-1 330 1.90 4604U 60" - 150 460 4.9 * 6-11 50 Available with 1½ ( 41615) 0.19 50307 Recom. 2 - *Including Underflow Chamber * 50410 1" 3.5-7.5 2 9 50615 508 50830 51243 516 560 52460 1½" x ¾" 3.5 7.5-11 - 18-35 - 52-12 17 34 52 82 98-160 1-230 Standard Underflow Chamber (liter) 530 230-360 3 2 10 10 10 60 1 2 2 18 27 (m³) * 8 0.03 0.03 0.05 0.08 0.08 66 0.60 125 1.10 172 5 1.35 1.75 365 2.72 8

Automatic Self Cleaning Filters Series 3000 ODIS series 3000 circulating filters are of self-cleaning, and prevent the formation of impurities by water circulation. These filters are applicable to water containing sand and organic residues, and intended for use under the most strenuous conditions. Series 3000 filters feature one stainless-steel screen. An automatic circulating process, prevents the formation of residues over the screen, while maintaining a constant flow of filtered water with no increase of head loss. The residues are collected into a collection cell, ready for drainage, without any interference to the irrigation process. Series 00 Registered Patent ODIS series 00 are self cleaning automatic screen filters. These filters are designed for trouble free operation, and are applicable to water containing sand and organic matter. The filters are intended for use under the most strenuous conditions. Series 00 filters continuously flush the screen during operation, as a result there is no increase in head loss. This is accomplished with a specially designed acceleration plate with four directional holes. The filter uses effectively the whole screen area due to the unique design of a spiral groove under the screen. The residue collecting chamber is an integral part of the filter screen. It has a conical form which prevents back flow of the residues. The filter includes a flushing controller activated at predetermined time intervals (field adjustable), to flush the residues accumulated in the collecting chamber. Standard models 3015(1 1 /), 30(), 3030(), 30(), 3060(). Horizontal inlet, vertical outlet s: 3915(1 1 /), 39(), 3930(), 39(), 3960(). Horizontal inlet/outlet with stone separator s: 37(), 3760(). Parallel vertical inlet/outlet with stone separator s: 38(), 3860(). Standard models 15(1 1 /), (), 30(), (), 60(), (), 10(10"). Horizontal inlet vertical outlet s 8915(1 1 /), 89(), 8930(), 89(), 8960(). 89(), 10(10"). Recom. (m 3 ) 3015 3915 1 1 / 3-11 15 0.05 30 39 3030 3930 30 39 37 38 11 12-31 - - 66-66 17 22 42 58 0.05 0.08 0.14 0.30 3060 3960 44-155 96 0.55 3760 3860 44-155 138 0. Recom. 15 8915 1 1 / 7-89 30 8930 89 60 8960 89 10 8910 10" 13 25 - - - 13 25 45 75-150 165-300 270-500 (m 3 ) 16 0.08 17 29 35 56 130 175 0.08 0.11 0.14 0.28 1.10 1.60 9

Manual & Automatic Brush Filters Series 8 ODIS brush filters are equipped with self adjusting brushes mechanism assembly for efficient cleaning of the entire screen area. Series 8 has a simple manually operated mechanism. The cleaning process is performed manually by opening a drain valve and rotating the brushes assembly by using a handle. The cleaning process can be done during filtration process without interruption to the filtered water supply. Reliability. Low minimum operating pressure. Simple and easy to operate. Improved cleaning efficiency of the screen due to self adjusting brushes mechanism. Filtered water supply is not interrupted during flushing. The Compact inline models allow installation in limited spaces. Long service life thanks to anti corrosion protection coating and non corrosive materials. Series 841 ODIS brush filters are equipped with self adjusting brushes mechanism assembly for efficient cleaning of the entire screen area. The filter combines the efficient brushes assembly system for cleaning the screen with the simplicity of a standard AC irrigation controller. Series 841 has a self-cleaning mechanism activated automatically on a time basis, with a Differential Pressure switch backup. The cleaning process can be activated automatically by a flushing controller or manually. Reliability. Low minimum operating pressure. Simple and easy to operate. Improved cleaning efficiency of the screen due to self adjusting brushes mechanism. Filtered water supply is not interrupted during flushing. Efficient fully automatic self-cleaning mechanism. Long service life thanks to anti corrosion protection coating and non corrosive materials. I 815-I 802-I 803-I 804-I 804 806 808 1½" 15 25 50 160 1500 1500 1500 20 3500 300 6000 15 17 42 82 5000 103 104 84104 84106 84108 84110 84112 10 1 84114 1 160 300 500 650 1000 3500 5000 6000 7500 100 100 92 113 114 270 0 415 10

Manual Suction Filter Series 842 ODIS filters series 842 are equipped with manual suction cleaning mechanism assembly for efficient cleaning of the entire screen area. The 842 filters are equipped with a simple mechanical differential pressure indicator which indicates filter cake build up. The compact filters 1½",, and are available in two configurations: a. T model - Vertical inlet and horizontal outlet. b. I model - Horizontal inlet and outlet - inline filter. Perfect solution for use without power supply. Filtered water supply is not interrupted during flushing. Economical, simple and easy to operate and service. Efficient suction cleaning system uses small quantities of water for flushing the screen. The compact filters allow installation in limited spaces. Mechanical differential pressure indicator. Long service life thanks to the anti corrosion protection coating and non corrosive materials. Water Filters Series 1900 CONTROL SCREEN FILTER ODIS series 1900 filters are designed for the following uses: 1. Control filter for media filter arrays. 2. Control filter for sand separators. 3. Back up filter in the field. 4. For use with well water that is relatively clean. Series 1900 filters feature one extra strong mesh stainless steel screen. s: 19706(), 19708(), 19710(10") 19712(1) s: 19003(), 19004() s: 196(), 198(), 19810(10") 19812(1) s: 19903(), 19904() 84215-I/T 842-I/T 843-I/T 844-I/T 844 846 848 1½" 15 25 50 150 250 1000 1000 1000 2150 2500 5000 5000 15 16 17 28 86 106 107 19003 19903 60 26 19004 19904 19706 196 19708 198 19710 19810 19712 19812 10" Recom. 100 250 350 500 27 53 84 108 1 650 129 11

Series 1000 & 00 ODIS series 1000 & 00 are suitable for the control of small quantities of water impurities. Water Filters Series 7000 ODIS series 7000 screen filters are intended for backflushing. These filters feature two stainless-steel screens for double protection. Series 1000 has a horizontal inlet and a bottom vertical outlet. Series 00 has a horizontal inlet and outlet. These filters are applicable to agriculture, industry, construction sites and domestic use. These filters are used mainly as secondary filters, following gravel filters. In such applications, both filters are flushed together, eliminating the need for separate valves. Series 7000 filters feature one reinforced stainlesssteel screen. Series 1000 With horizontal inlet and a bottom vertical outlet. Recom. Series 00 With horizontal inlet and outlet (m 3 ) 1115 * 1 1 / 15 6 0.011 12 13 1430 10 1" 23 30 38 7 13 16 17 5.5 0.028 0.047 0.047 0.028 15 1 1 / 15 7 0.028 30 15 0.052 30 27 0.078 42 0.144 2260 1 72 0.2 22 300 91 0.350 ODIS presently offers two types of series 7000 screen filters: 1. With horizontal inlet and outlet, s: 70(), 7030(), 70(). 2. With vertical inlet and horizontal outlet, s: 7930(), 79(). Recom. (m 3 ) 70 35 14 0.052 7030 70 7930 79 60 105 60 105 17 32 0.078 0.144 0.047 0.064 * With one screen only 12

Preliminary Suction Strainers Series 181 SELF- CLEANING SUCTION STRAINER The self cleaning suction strainer is designed to protect the pump from clogging by debris, trash and solid dirt. It is connected to the pump inlet and submerged in the water source (river, lake, reservoir etc.). When using non self priming pump, it is recommended to use ODIS foot valve series 189 to ensure that the pump supply line will always remain full with water. The foot valves are supplied in the same sizes as series 181. All the pumped water flows through the strainer, and the debris are stopped on the heavy duty stainless steel screen, protecting the pump from clogging or getting damaged by the debris. As a result, the pump efficiency is increased and the maintenance costs are reduced. The screen is kept clean during pump operation by continuously rotating jets (Water Jet System) using pump pressure through the Water Jet System supply line, the water pressure blows away the debris from the screen. The strainer is supplied with the Water Jet System supply line, including: a screen water filter for jet protection, manometer mounted on a three way valve for filter head loss check and a manual valve for filter maintenance. Series 184 PRE-FILTRATION STRAINER ODIS Pre-filtration strainer is designed to protect pumps, valves, finer filters etc., by preventing passage of coarse solids, if they penetrate the water system. This product features a stainless steel perforated screen. Available in several perforations from 3mm 8mm. ODIS Pre-filtration strainer is recommended for main water lines or municipal water system supply, to protect them also during pipeline maintenance work. The contaminants are discharged by opening of drain valve, located at bottom of the filter. As an option ODIS offers an automatically controlled drain valve. Max* (m 3 ) 18104 18106 18108 18110 18112 18114 18116 10" 1 1 1 Max 10 2500 ( micron ) 1 300 4 600 0 1000 ( micron ) 100 230 3 550 750 1000 10 24 35 57 62 71 81 (m³) 0.21 0.31 0.36 0.51 0.57 1.21 1.21 182 183 184 186 188 18410 18412 18414 18416 18418 184 18424 2 3 4 6 8 10 12 14 16 18 24 65 150 260 0 5 700 8 1150 1450 00 35 45 65 95 1 170 2 275 350 575 670 0.06 0.06 0.06 0.09 0.15 0.2 0.3 0.35 0.45 0.54 0.9 1.2 *For minimum 3 mm perforations 13

Disc Filters Series 1500, 1700, 2500, 2600 ODIS offers it's line of Disc Filters. Specially grooved plastic discs stacked together to form the filtering element with large effective filtering area. The sediments are stopped on the outer surface of the filtering element. The filters can be cleaned in two ways: Manual cleaning, after dismantling and removing the disc stack. Backflushing, without dismantling the filter, usually in arrays. Series 1700 Series 2600 Series 1500 ODIS offers 4 series of filters: 1. Series 1500 with a coated carbon steel body. With horizontal inlet and vertical outlet. 2. Series 2500 with a coated carbon steel body. With horizontal inlet and outlet. 3. Series 1700 with a coated carbon steel body and a reinforced plastic cover. With horizontal inlet and vertical outlet. 4. Series 2600 with reinforced plastic body and covers. With horizontal inlet and outlet. This filter contains two filtering elements so the filter has a very large filtering area. Horizontal inlet, vertical outlet s: 1502(), 1503(), 1504(). Horizontal inlet, vertical outlet Optional horizontal outlet. s: 17(), 1730(), 17(). Recom. Horizontal inlet, and outlet s: 2502(), 2503(), 2504(). Horizontal inlet, and outlet : 2630() (m 3 ) 1502 25 18.7 0.049 1503 1504 17 1730 50 0.062 0.074 0.066 0.078 17 17.5 0.086 2502 25.0 0.065 2503 50 28.2 0.110 2504 32.3 0.110 2630 50 12.0 0.1 25 50 22.3 29.4 12.5 13.5 Series 2500 Series 2100 PLASTIC BODY SCREEN/DISC FILTERS ODIS series 2100 filters are used mainly as control filters in agriculture and gardening. The filter body is manufactured from reinforced plastic. ODIS offers the 2100 series with various filtering element. Specially grooved plastic discs. Stainless steel screen. Plastic screen for models 2107 and 2110 2107 2110 2115 1½" 10 Element 550 Disc Element (cm 2 ) ¾" 3 130 1 1" 5 130 1 505 21 15 550 505 SCREEN SIZE Color Element Mesh Light blue Brown 1 Green 155 DISC SIZE Color Yellow Red Disc Element Mesh 1 Black 1 14

Gravity Filter Series 188 Series 188 is a new Self Cleaning Gravity Filter. This filter is especially designed for low pressure drip irrigation. The filtering method is based on gravity flow through a stainless steel screen. Raw water feed to the filter is carried out by gravity or by low pressure. The filter is designed to continuously remove dirt from screen during filtration process without interrupting the filtered water supply. The efficient self cleaning process combines rotating cleaning jets assembly which blows away the dirt from the screen, and raw water flow that sweeps the dirt to the dirt collection cell. The unique design of the dirt collection cell allows minimal loss of water during cell flushing. 18848 18860 (Inch) 6 (mm) Body diameter (Inch) US patent application 11/774,706 (mm) Max. (gpm) 150 48 10 100 4 8 0 60 1500 170 750 Fertilizing Equipment Series 6000 FERTILIZER TANK ODIS fertilizer tanks series 6000 have been designed specifically for fertigation in agriculture. This system is simple, efficient and trouble-free. The fertilizer tanks are applying fertilizers on the quantitative principle. The fertilizers are applied continuously during irrigation, either manually or controlled by an irrigation controller. Capacity (liter) 6005 * 5 6010 * 10 6015 15 6030 30 6060 60 6090 90 61 1 6121 * 1 6221 * 2 6301 * 300 6501 * 500 *Horizontal models Series 653 US patent application 11/367083 FERTIGATION PUMP ODIS fertigation pump is designed for efficient applying of chemicals and fertilizers in irrigation systems. The pump is powered by the irrigation system water prussure. Fertigation pump capacity range of 12 to 1 liter/h. The pump rate is adjusted accurately by adjustment valve; in addition the pump rate can be monitored by counter (optional). The fertilizer is mixed with the flowing water and evenly distributed through the sprinklers or drippers. ODIS fertigation pump can be used with all fertilizers and chemicals in agricultural applications. The modular structure allows multiple installation options in automatic irrigation systems. The pump is compact; moveable and requires minimal onsite installation work. 8 9 18 24 31 38 44 45 59 75 130 (m 3 ) 0.02 0.04 0.05 0.10 0.13 0. 0.25 0.28 0.44 0.53 1.15 15

ODIS Irrigation Equipment Ltd. manufactures and supplies a large variety of filtration systems and water treatment solutions for Irrigation and Agriculture. The company has more than 25 years of experience in developing, designing, manufacturing and supply of filtration systems and filters all over the world. Company Products include: Water treatment plants. Filtration Arrays. Automatic filters (Electrically operated and Hydraulically operated). Manual Filters. Fertilizer and control systems. Manifolds and accessories. All ODIS products are modular and interchangeable, so modifications and expansions of arrays can be done on site easily according to the changing needs of the customer. ODIS is committed to supply the highest level of quality and service. All ODIS products are manufactured under ISO 9001-08 Standard. As a world leader in its field, ODIS has a wide world presence in all five continents with products exported to customers all over the world including the USA, Spain, France, Holland, Japan and Australia. Research and Development The company has a highly skilled team of engineers and technicians supported by a sophisticated laboratory to develop new products, improve existing ones and respond to customer needs. ODIS provides technical support and consultation to its customers all over the world and organizes seminars and practical training. The ODIS Group a Trade Mark Well-Known All Over The World ODIS Irrigation Equipment Ltd is part of the ODIS group of companies dealing with various aspects of water and sewage treatment to industrial applications, municipalities and domestic users. The experience gathered in the different companies within the group enables ODIS Irrigation Equipment to offer unique solutions.