Table of Contents Page Split System Residential Units...........................502-508, 539-543 Air Conditioning, Heat Pumps......................502-508, 539-543 Blower Units, Coils................................528-533, 509-522 Accessories..................................................563 Electric Furnaces...................................................556 Gas Furnaces..........................................523-527, 544-547 Oil Furnaces...............................................557-558, 562 Package Commercial 1 Phase............................534-538, 548-550 Package Commercial 3 Phase....................................554-556 Commercial Split Systems.......................................552-555 Ductless Split A/C, Heat Pump...............................568, 590-594 PTAC Units................................................580, 582-583 High Static Split System Units.......................................584 Residential Package Units...............................534-538, 548-550 Package Thru-The-Wall Units.....................................587-589 Geothermal Package Units......................................559-561 Self Contained A/C, Heat Pump..................................595-597 Thru-The-Wall, Split A/C.............................................573 Window Unit..............................................575, 577-579 Portable A/C...................................................578, 581 501
AIR CONDITIONER SPLIT FS4BD-KB SERIES R-410A High Efficiency Air Conditioner 13 SEER Residential System 1-1/2 5 Ton Capacity Composite Base Pan: Absorbs sound and corrosion resistant. Composite is also stronger and lighter than steel. R-410A Refrigerant: Earth friendly non-ozone depleting refrigerant. Easy Compressor and Control Access: Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit. Louvered Condenser Guard: Durable metal guard protects the coil from yard hazards and extreme weather. Removable Top Grille Assembly: Allows ease of service from the top without disconnecting fan motor leads. Permanently Lubricated Motor: A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow. Designed using galvanized steel: with a polyester urethane coat finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units. High Pressure Switch: Protects against abnormally high system pressures. Autoreset feature prevents nuisance service visits. Liquid Line Filter Drier: Included with unit, field installed. One Piece Top/Orifice: Designed for maximum airflow and quiet operation. Swept Wing Fan Blade: Designed to significantly reduce unwanted noise. Micro-Channel Coils: All aluminum coils in all models which provides high corrosion resistance. Model High Capacity BTUh SEER Operating Voltage Range EER Dimensions (in) D W H Shipping Weight (lbs) FS4BD*018KB 17,600 13 187-253 11 22-3/4 22-3/4 25 114 % FS4BD*024KB 23400 13 187-253 11 22-3/4 22-3/4 25 130 % FS4BD*030KB 28600 13 187-253 11 22-3/4 22-3/4 29 144 % FS4BD*036KB 35000 13 187-253 11 22-3/4 22-3/4 29 146 % FS4BD*042KB 40000 13 187-253 11 30-3/4 30-3/4 29-1/2 187 % FS4BD*048KB 46000 13 187-253 10.9 30-3/4 30-3/4 29-1/2 187 % FS4BD*060KB 55000 13 187-253 11 30-3/4 30-3/4 33-1/2 197 % 502
AIR CONDITIONER SPLIT FS4BE SERIES R-410A High Efficiency Air Conditioner 14 SEER Residential System 1-1/2 5 Ton Capacity The FS4BE Series now offers the choice of an air conditioner that uses more efficient and environmentally friendly refrigerant designated R-410A. The FS4BE Series of air conditioners offers exceptional performance. The unit, when combined with our engineered coils or air handlers, offers a full line of quality, split system cooling equipment. Model Total Amps SEER Designed using galvanized steel: with a polyester urethane coat finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units. Permanently Lubricated Motor: A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow. Composite Base Pan: Absorbs sound and corrosion resistant. Composite is also stronger and lighter than steel. Delay Fuse Max. (2) Min. Circuit Ampacity R-410A Refrigerant: Earth friendly non-ozone depleting refrigerant. Easy Compressor and Control Access: Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit. Louvered Condenser Guard: Durable metal guard protects the coil from yard hazards and extreme weather. Removable Top Grille Assembly: Allows ease of service from the top without disconnecting fan motor leads. Dimensions (in) D W H High Pressure Switch: Protects against abnormally high system pressures. Autoreset feature prevents nuisance service visits. Shipping Weight (lbs) FS4BE-018KA 9.9 14 20 12.1 22-3/4 22-3/4 29 113 % FS4BE-024KA 14.4 14 30 17.7 22-3/4 22-3/4 33 134 % FS4BE-030KA 15 14 30 18.5 30-3/4 30-3/4 29 140 % FS4BE-036KA 15.1 14 30 18.6 30-3/4 30-3/4 37 155 % FS4BE-042KA 19.4 14 40 23.9 30-3/4 30-3/4 41 184 % FS4BE-048KA 21.3 14 45 26.3 30-3/4 30-3/4 41 186 % FS4BE-060KA 29 14 60 35.6 30-3/4 30-3/4 45 196 % 503
AIR CONDITIONER SPLIT FS4BF-K(B,C) SERIES R-410A Extra High Efficiency Air Conditioner 16 SEER Residential System 2-5 Ton Capacity The FS4BF Series now offers the choice of an air conditioner that uses a more efficient and environmentally friendly refrigerant designated R-410A. The FS4BF-K(B,C) Series air conditioners offers exceptional performance. The unit, when combined with our engineered coils and air handlers, offers a line of quality, 16 SEER split system cooling equipment. Model High Speed Capacity (BTU/h) ComfortAlertTM Module: Detects system and electrical problem conditions. A diagnostics key directs the service technician to the root cause of the problem. Copeland Scroll Ultra TechTM Compressor: operates with 2 stages of cooling capacity to provide superior comfort and efficiency. Copeland s proven and simple design equates to years of comfort and reliability for the homeowner with virtually silent operation. SEER Operating Voltage Range Durable, Attractive Cabinet: Designed using galvanized steel with a polyester urethane finish. The 950 hour salt spray finish is 1.5 mil thick and resists corrosion 50% better than comparable units. Compressor Sound Blanket: Engineered to significantly reduce unwanted compressor noise. Composite Base Pan: Absorbs sound and corrosion resistant. Composite is also stronger and lighter than steel. R-410A Refrigerant: Earth friendly non-ozone depleting refrigerant. EER Dimensions (in) D W H Easy Compressor and Control Access: Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit. Shipping Weight (lbs) FS4BF-024KB 24,000 16 187-253 13 22-3/4 22-3/4 33 151 % FS4BF-036KB 36,000 16 187-253 13 30-3/4 30-3/4 37 197 % FS4BF-048KC 47,000 16 187-253 13 30-3/4 30-3/4 41 207 % FS4BF-060KC 55,000 16 187-253 12.5 30-3/4 30-3/4 45 195 % 504
HEAT PUMP SPLIT FT4BD SERIES R-410A High Efficiency Heat Pump 13 SEER Residential System 1 1/2 5 Ton Capacity The FT4BD Series now offers the choice of a heat pump that uses a more efficient and environmentally friendly refrigerant designed R-410A. The FT4BD Series of heat pumps offers exceptional performance. The unit, when combined with our engineered coils or air handlers, offers a full line of Model Number Volts-Cycles- Phase (1) quality, split system cooling equipment. R-410A Refrigerant: Environmentally friendly. Copper Tube/Aluminum Fin Coils: Both indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability. Louvered Condenser Guard: Durable metal guard protects the coil from yard hazards and extreme weather. Total Amps Delay Fuse Max. (2) Min. Circuit Ampacity Removable Top Grille Assembly: Allows ease of service to the fan motor. High Pressure Switch: Protects against abnormally high system pressures. Autoreset feature prevents nuisance service visits. Low Pressure Switch: Loss of charge protection ensures long compressor life. Autoreset prevents nuisance service visits. Liquid Line Filter Driers: Factory installed at a convenient location for service. One Piece Top/Orifice: Designed for maximum airflow and quiet operation. Ship Wt (lbs.) Height Width Depth FT4BD-018KA 208/230-60-1 10.2 20 12.4 175 33-1/2 30-3/4 30-3/4 % FT4BD-024KA 208/230-60-1 14.6 30 18 180 37-1/2 30-3/4 30-3/4 % FT4BD-030KA 208/230-60-1 15.3 30 18.8 185 41-1/2 30-3/4 30-3/4 % FT4BD-036KA 208/230-60-1 17.8 35 22 190 45-1/2 30-3/4 30-3/4 % FT4BD-042KA 208/230-60-1 19.4 40 23.9 260 41-1/2 30-3/4 30-3/4 % FT4BD-048KA 208/230-60-1 23.2 50 28.7 295 45-1/2 30-3/4 30-3/4 % FT4BD-060KA 208/230-60-1 27.7 60 34.3 305 45-1/2 30-3/4 30-3/4 % FT4BDE SERIES R-410A High Efficiency Heat Pump 14 SEER Residential System 1 1/2 5 Ton Capacity FT4BE Series now offers the choice of a heat pump that uses a more efficient and environmentally friendly refrigerant designated R-410A. The FT4BE Series of heat pumps offers exceptional performance. The unit, when combined with our engineered coils or air handlers, offers a full line of quality, split system cooling equipment. Model Number Volts-Cycles- Phase (1) Designed Using Galvanized Steel: with a polyester urethane coat finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units. R-410A Refrigerant: Environmentally friendly. Louvered Condenser Guard: Durable metal guard protects the coil from yard hazards and extreme weather. Removable Top Grille Assembly: Allows ease of service to the fan motor. Swept-Wing Fan Blade: Designed to significantly reduce unwanted noise. Total Amps Delay Fuse Max. Min. Circuit (2) Ampacity Permanently Lubricated Motor: A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow. High Pressure Switch: Protects against abnormally high system pressures. Autoreset feature prevents nuisance service visits. Low Pressure Switch: Loss of charge protection ensures long compressor life. Autoreset prevents nuisance service visits. Liquid Line Filter Driers: Factory installed at a convenient location for service. One Piece Top/Orifice: Designed for maximum airflow and quiet operation. Ship Wt (lbs.) Height Width Depth FT4BE-018KA 208/230-60-1 9.9 20 12.1 144 33-1/2 30-3/4 30-3/4 % FT4BE-024KA 208/230-60-1 14.4 30 17.7 149 33-1/2 30-3/4 30-3/4 % FT4BE-030KA 208/230-60-1 13.7 25 16.9 158 41-1/2 30-3/4 30-3/4 % FT4BE-036KA 208/230-60-1 15.1 30 18.6 167 45-1/2 30-3/4 30-3/4 % FT4BE-042KA 208/230-60-1 19.4 40 23.9 200 45-1/2 30-3/4 30-3/4 % FT4BE-048KA 208/230-60-1 21.3 45 26.3 202 45-1/2 30-3/4 30-3/4 % FT4BE-060KA 208/230-60-1 27.7 60 34.3 210 45-1/2 30-3/4 30-3/4 % 505
HEAT PUMP SPLIT FT4BF-KA/B SERIES R-410A Extra High Efficiency Heat Pump 16 SEER Residential System 2-5 Ton Capacity Copeland Scroll Ultra Tech Compressor: Operates with 2 stages of heating and cooling capacities to provide superior comfort and efficiency. Copeland s proven and simple design equates to years of comfort and reliability for the homeowner with virtually silent operation. Durable, Attractive Cabinet: Designed using galvanized steel with a polyester urethane finish. The 950 hour salt spray finish is 1.5 mil thick and resists corrosion 50% better than comparable units. Model Number Volts-Cycles- Phase (1) Composite Base Pan: Absorbs sound and is corrosion resistant. Composite is also stronger and lighter than steel. Copper Tube/Aluminum Fin Coils: Both indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability. Demand Defrost: Provides additional energy savings in heating by defrosting only when necessary. Louvered Condenser Guard: Durable metal guard protects the coil from yard hazards and extreme weather. Removable Top Grille Assembly: Allows ease of service to the fan motor. Low Pressure Switch: Loss of charge protection ensures Total Amps Delay Fuse Max. (2) Min. Circuit Ampacity long compressor life. Autoreset prevents nuisance service visits. High Pressure Switch: Protects against abnormally high system pressures. Autoreset feature prevents nuisance service visits. Liquid Line Filter Driers: Factory installed at a convenient location for service. One Piece Top/Orifice: Designed for maximum airflow and quiet operation. Easy Compressor and Control Access: Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit. Common Suction Service Port: This port allows the contractor to read the suction pressure in all modes of operation without removing any panels, saving time and increasing serviceability. 3 Minute Restart Delay: When the unit shuts down, a 3 minute delay keeps the unit from restarting, eliminating the highest cause for compressor failure. Suction Accumulator: Protection from liquid flood back and future compressor failures. Hot Gas Muffler: Reduces compressor noise and vibration. Compressor Sound Blanket: Engineered to significantly reduce unwanted compressor noise. Swept-Wing Fan Blade: Designed to significantly reduce unwanted noise. Ship Wt (lbs.) Height Width Depth FT4BF-024KB 208/230-60-1 11.4 20 14 265 45-1/2 31-1/4 31-1/4 % FT4BF-036KA 208/230-60-1 17.9 35 22.1 289 45-1/2 31-1/4 31-1/4 % FT4BF-048KA 208/230-60-1 24.0 50 29.3 289 45-1/2 31-1/4 31-1/4 % FT4BF-060KA 208/230-60-1 25.9 50 31.7 313 45-1/2 31-1/4 31-1/4 % 506
HEAT PUMP SPLIT FT4BG SERIES R-410A, Ultra High Efficiency Heat Pump, Up to 19 SEER Residential System 2-5 Ton Capacities iq Drive: Inverter driven Samsung rotary compressor provides five capacities in modulating operation from a two stage thermostat. Interface Control Board: Two digit LED provides system operation, status and diagnostic troubleshooting information. Utilizes a NORDYNE: Patented capacity control algorithm to select the optimum system capacity level. System Protection: Internal controls monitor system operation to protect the inverter drive and compressor. Cooling Operating Temperature Range: 50 degrees F 125 degrees F Locks Out Heat Pump Heating: Below 0 degrees F Adaptive Demand Defrost: Provides additional energy savings in heating by defrosting only when necessary. 5 Minute Restart Time Delay: When the unit shuts down, a delay keeps the unit from restarting, eliminating the highest cause for compressor failure. Easy Compressor and Control Access: Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit. Suction Accumulator: Protection from liquid flood back and future compressor failures. Compressor Sound Blanket: Engineered to significantly reduce unwanted compressor noise. Common Suction Service Port: This port allows the contractor to read the suction pressure in all modes of operation without removing any panels, saving time and increasing serviceability. Low Pressure Switch: Loss of charge protection ensures long compressor life. Autoreset prevents nuisance service visits. High Pressure Switch: Protects against abnormally high system pressures. Autoreset feature prevents nuisance service visits. Liquid Line Filter Driers: Factory installed at a convenient location for service. One Piece Top/Orifice: Designed for maximum airflow and quiet operation. Discharge Muffler: Reduces compressor noise and vibration. High Efficiency with low sound levels: Up to 19 SEER with sound ratings of 59-73 depending upon operating conditions. R-410A Refrigerant: Environmentally friendly nonozone depleting refrigerant. Variable Speed Condenser Motor and Swept-Wing Fan Blade: A heavy duty brushless DC motor for long lasting reliability and engineered to provide quiet operation. Requires no maintenance and is completely protected from rain and snow. Louvered Condenser Guard: Durable metal guard protects the coil from yard hazards and extreme weather. Removable Top Grille Assembly: Allows ease of service to the fan motor. Copper Tube/Aluminum Fin Coils: Both indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability. Composite Base Pan: Absorbs sound and is corrosion resistant. Composite is also stronger and lighter than steel. Durable, Attractive Cabinet: Designed using galvanized steel with a polyester urethane finish. The 950 hour salt spray finish is 1.5 mil thick and resists corrosion 50% better than comparable units. Model Number Volts-Cycles- Phase (1) Total Amps Delay Fuse Max. (2) Min. Circuit Ampacity Ship Wt (lbs.) Height Width Depth FT4BG-024K 208/230-60-1 13.1 25 15.8 200 37 31-1/4 31-1/4 % FT4BG-036K 208/230-60-1 17.5 35 21.2 220 41 31-1/4 31-1/4 % FT4BG-048K 208/230-60-1 23.5 45 28.7 252 41 31-1/4 31-1/4 % FT4BG-060K 208/230-60-1 31.2 60 38 272 45 31-1/4 31-1/4 % 507
HEAT PUMP SPLIT FT4BI SERIES R-410A, Ultra High Efficiency Heat Pump, 21+ SEER, 12.5+ EER, 9.6 HSPF Residential System 2-3-4 Ton Capacities iq Drive: Inverter driven Samsung rotary compressor provides five capacities in modulating operation from a two stage thermostat. R-410A Refrigerant: Environmentally friendly nonozone depleting refrigerant. Durable, Attractive Cabinet: Designed using galvanized steel with a polyester urethane finish. The 950 hour salt spray finish is 1.5 mil thick and resists corrosion Model Number Volts-Cycles- Phase (1) 50% better than comparable units. Copper Tube/Aluminum Fin Coils: Both indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability. Compressor Sound Blanket: Engineered to significantly reduce unwanted compressor noise. Permanently Lubricated Motor: A heavy duty brushless motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow. Swept-Wing Fan Blade: Total Amps Delay Fuse Max. (2) Min. Circuit Ampacity Engineered to provide quiet operation. The specific energy absorbing hub is designed to reduce noise while operating through various frequencies. Louvered Condenser Guard: Durable metal guard protects the coil from yard hazards and extreme weather. Removable Top Grille Assembly: Allows ease of service to the fan motor. Low Pressure Switch: Loss of charge protection ensures long compressor life. Autoreset prevents nuisance service visits. High Pressure Switch: Protects against abnormally high system pressures. Autoreset feature prevents nuisance service visits. Liquid Line Filter Driers: Factory installed at a convenient location for service. One Piece Top/Orifice: Designed for maximum airflow and quiet operation Easy Compressor and Control Access: Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit. High Efficiency with low sound levels: Up to 19 SEER with sound ratings of 59-73 depending upon operating conditions. Ship Wt (lbs.) Height Width Depth FT4BI-024K 208/230-60-1 13.0 25 16.6 200 37 31-1/4 31-1/4 % FT4BI-036K 208/230-60-1 18.0 35 22.9 230 41 31-1/4 31-1/4 % FT4BI-048K 208/230-60-1 22.0 45 27.1 235 45 31-1/4 31-1/4 % 508
EVAPORATOR COILS C7 Indoor Coils with Orifice MODEL IDENTIFICATION TION CODE Coil Design Series BA = "A" Vertical Coil BH = Horizontal Multipoise Coil Micro-Channel C 7 BA M 0 36 Metering Device 0 = Orifice U - B Cabinet Identifier A = 14-1/4" Width B = 17-1/2" Width C = 21" Width D = 24-1/2" Width C = Cased Coil U = Uncased Coil Nominal Capacity/ Range (00/0000) Btuh 17 3/4 OW 5/8 H HS HL Cased Coil Wrapper 20 3/4 W C7 C ASED COIL WRAPPERS SKU 920256 920257 920258 920259 920260 920261 920262 Overall Width Overall Height Liquid Line Height Suction Line Height Cabinet Identifier W H HL HS A 14 1/4" 20 3/4" 17 1/2" 15 1/2" A 14 1/4" 26 3/4" 23 1/2" 21 1/2" B 17 1/2" 20 3/4" 17 1/2" 15 1/2" B 17 1/2" 26 3/4" 23 1/2" 21 1/2" C 21" 26 3/4" 23 1/2" 21 1/2" C 21" 30 1/4" 27" 25" D 24 1/2 30 1/4" 27" 25" Opening Width OW 12 7/8" 12 7/8" 16 1/8" 16 1/8" 19 5/8" 19 5/8" 23 1/8" 509
EVAPORATOR COILS 3 1/8 HL H HS C7 UNCASED COIL DATA C7 UNCASED Face Area (ft^2) Fins per inch 2 1/2 W 1824-A 3036-A 3.43 3.43 20 18 Uncased Coil 1824-B 3036-B 3642-B 30-C 3.43 3.43 4.87 3.43 20 20 20 20 19 1/2 3648-C 48-C 60-C 42-D 4.87 5.82 5.82 4.87 20 20 20 20 48-D 60-D 5.82 5.82 20 20 W - Width (in.) 12-3/4 12-3/4 16 16 16 19-1/2 19-1/2 19-1/2 19-1/2 23 23 23 H - Height (in.) 18-1/2 18-1/2 18 18 25 18 24-1/2 28-1/2 28-1/2 23-3/4 27-3/4 27-3/4 HL - Height of Liquid Line (in.) 17-1/2 17-1/2 17-1/2 17-1/2 23-1/2 23-1/2 23-1/2 27 27 27 27 27 HS - Height of Suction Line (in.) 15-1/2 15-1/2 15-1/2 15-1/2 21-1/2 21-1/2 21-1/2 25 25 25 25 25 Connection - Liquid Line 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 Connection - Suction Line 3/4 3/4 3/4 3/4 7/8 3/4 7/8 7/8 7/8 7/8 7/8 7/8 Horizontal Drain Kit 920265 920265 920265 920265 920266 920266 920266 920267 920267 920267 920267 920267 Tube Kit for TXV 921824 921824 921825 921825 921826 921827 921828 921829 921829 921830 921831 921831 Metering Orifice Size (in.) 0.048 0.061 0.055 0.067 0.071 0.061 0.067 0.077 0.083 0.071 0.077 0.083 Nominal Airflow (CFM) (Lower Tonnage) Nominal Airflow (CFM) (Higher Tonnage) Pressure Drop at nom airflow (in. wc) (Low er Tonnage) 600 700 0.12 1,000 1,200 0.26 Pressure Drop at nom airflow (in. wc) (Higher To onnage) 0.17 0.27 550 1,000 1,300 750 1,200 1,300 0.09 0.26 0.25 0.15 0.27 0.27 960 0.26 1,250 1,400 0.24 0.29 1,300 1,700 1,300 0.31 0.30 0.30 1,300 1,700 0.31 0.30 510
EVAPORATOR COILS C7 CASED COIL DATA C7 CASED 1824-A 3036-A 1824-B 3036-B 3642-B 30-C 3648-C 48-C 60-C 42-D 48-D 60-D Face Area (ft^2) Fins per inch W - Width (in.) H - Height (in.) HL - Height of Liquid Line (in.) HS - Height of Suction Line (in.) Connection - Liquid Line Connection - Suction Line Horizontal Drain Kit 3.43 20 14-1/4 20-3/4 17-1/2 15-1/2 3/8 3/4 920265 3.43 18 14-1/4 20-3/4 17-1/2 15-1/2 3/8 3/4 920265 3.43 20 17-1/2 20-3/4 17-1/2 15-1/2 3/8 3/4 920265 3.43 20 17-1/2 20-3/4 17-1/2 15-1/2 3/8 3/4 920265 4.87 20 17-1/2 26-3/4 23-1/2 21-1/2 3/8 7/8 920266 3.43 20 21 26-3/4 23-1/2 21-1/2 3/8 3/4 920266 4.87 20 21 26-3/4 23-1/2 21-1/2 3/8 7/8 920266 5.82 20 21 30-1/4 27 25 3/8 7/8 920267 5.82 20 21 30-1/4 27 25 3/8 7/8 920267 4.87 20 24-1/2 30-1/4 27 25 3/8 7/8 920267 5.82 20 24-1/2 30-1/4 27 25 3/8 7/8 920267 5.82 20 24-1/2 30-1/4 27 25 3/8 7/8 920267 Tube Kit for TXV 921824 921824 921825 921825 921826 921827 921828 921829 921829 921830 921831 921831 Metering Orifice Size (in.) Nominal Airflow (CFM) (Lower Tonnage) Nominal Airflow (CFM) (Higher Tonnage) Pressure Drop at nom airflow (in. wc) (Lower Tonnage) Pressure Drop at nom airflow (in. wc) (Higher Tonnage) 0.048 600 700 0.12 0.17 0.061 1,000 1,200 0.26 0.27 0.055 0.067 0.071 0.061 0.067 0.077 0.083 0.071 0.077 0.083 550 1,000 1,300 1,250 960 750 1,200 1,300 1,400 0.09 0.26 0.25 0.24 0.26 0.15 0.27 0.27 0.29 1,300 1,700 1,300 1,300 1,700 0.31 0.30 0.30 0.31 0.30 C7 HORIZONTAL COIL DATA C7 HORIZONTAL 1824-A 3036-A 1824-B 3036-B 3642-B 30-C 3648-C 48-C 60-C 42-D 48-D 60-D Face Area (ft^2) 3.43 3.43 3.43 3.43 4.87 3.43 4.87 5.82 5.82 4.87 5.82 5.82 Fins per inch 20 18 20 20 20 20 20 20 20 20 20 20 W - Width (in.) 14-1/4 14-1/4 17-1/2 17-1/2 17-1/2 21 21 21 21 24-1/2 24-1/2 24-1/2 H - Height (in.) 26-3/4 26-3/4 26-3/4 26-3/4 26-3/4 26-3/4 26-3/4 30-1/4 30-1/4 30-1/4 30-1/4 30-1/4 HL - Height of Liquid Line (in.) 23-1/2 23-1/2 23-1/2 23-1/2 23-1/2 23-1/2 23-1/2 27 27 27 27 27 HS - Height of Suction Line (in.) 21-1/2 21-1/2 21-1/2 21-1/2 21-1/2 21-1/2 21-1/2 25 25 25 25 25 Connection - Liquid Line 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 Connection - Suction Line 3/4 3/4 3/4 3/4 7/8 3/4 7/8 7/8 7/8 7/8 7/8 7/8 Horizontal Drain Kit N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Tube Kit for TXV 921824 921824 921825 921825 921826 921827 921828 921829 921829 921830 921831 921831 Metering Orifice Size (in.) 0.048 0.061 0.055 0.067 0.071 0.061 0.067 0.077 0.083 0.071 0.077 0.083 Nominal Airflow (CFM) (Lower Tonnage) 600 1,000 550 1,000 1,300 1,250 960 1,300 1,700 1,300 1,300 1,700 Nominal Airflow (CFM) (Higher Tonnage) 700 1,200 750 1,200 1,300 1,400 Pressure Drop at nom airflow (in. wc) 0.12 0.26 0.09 0.26 0.25 0.24 (Lower Tonnage) 0.26 Pressure Drop at nom airflow (in. wc) 0.17 0.27 0.15 0.27 0.27 0.29 (Higher Tonnage) 0.31 0.30 0.30 0.31 0.30 NOTES: 1. Individual restrictors are available by part number - PN 664*** (where *** represents the size). Example: 664103 is a restrictor 0.103 in diameter. 2. Refer er to sales specification sheets for Listed/Certified tified combinations of equipment and required accessories. 3. Refer er to the current AHRI Directory for certified ratings of split systems. Horizontal Cased Coil Cased Coil 511
EVAPORATOR COILS C7 Indoor Coils with TXV MODEL IDENTIFICATION TION CODE Coil Design Series BH = Horizontal Multipoise Coil Micro-Channel C 7 BH M X 36 Meter Device X = TXV C - B Cabinet Identifier A = 14-1/4" Width B = 17-1/2" Width C = 21" Width D = 24-1/2" Width C = Cased Coil Nominal Capacity/Range (00/00) Btuh 17 3/4 OW 5/8 H HS HL Cased Coil Wrapper 20 3/4 W C7 CASED COIL WRAPPERS SKU 920256 920257 920258 920259 920260 920261 920262 Overall Width Overall Height Liquid Line Height Suction Line Height Cabinet Identifier W H HL HS A 14 1/4" 20 3/4" 17 1/2" 15 1/2" A 14 1/4" 26 3/4" 23 1/2" 21 1/2" B 17 1/2" 20 3/4" 17 1/2" 15 1/2" B 17 1/2" 26 3/4" 23 1/2" 21 1/2" C 21" 26 3/4" 23 1/2" 21 1/2" C 21" 30 1/4" 27" 25" D 24 1/2 30 1/4" 27" 25" Opening Width OW 12 7/8" 12 7/8" 16 1/8" 16 1/8" 19 5/8" 19 5/8" 23 1/8" 512
EVAPORATOR COILS 3 1/8 TXV HS HL H W 2 1/2 Figure 1. C7 Coil Dimensions (with TXV) 19 1/2 NOMINAL CAPACITY, BTUH METERING DEVICE NOMINAL AIRFLOW, (CFM) CONNECTION - LIQUID LINE CONNECTION - SUCTION HORIZONTAL DRAIN PAN C7 Coil Specifications (TXV Only) HORIZONTAL UNITS A-CABINETS B-CABINETS C-CABINETS D-CABINETS X24C-A X30C-A X36C-A X24C-B X30C-B X36C-B X30C-C X36C-C X42C-C X48C-C X60C-C X48C-D X60C-D, BTUH 24,000 30,000 36,000 24,000 30,000 36,000 30,000 36,000 42,000 48,000 60,000 48,000 60,000 TXV TXV TXV TXV TXV TXV TXV TXV TXV TXV TXV TXV TXV, (CFM) 800 1000 1000 800 1000 1200 1000 1200 1400 1600 2000 W - WIDTH (IN.) H - HEIGHT (IN.) HL - HEIGHT OF LIQUID LINE (IN.) HS - HEIGHT OF SUCTION LINE (IN.) 12.75 18.5 17.5 15.5 12.75 18.5 17.5 15.5 12.75 18.5 17.5 15.5 16 18 17.5 15.5 16 18 17.5 15.5 16 18 17.5 15.5 19.5 18 23.5 21.5 19.5 24.5 23.5 21.5 19.5 24.5 23.5 21.5 19.5 24.5 23.5 21.5 19.5 28.5 27 25 23 27.75 27 25 23 27.75 27 25 INE 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 LINE 3/4 3/4 3/4 3/4 3/4 3/4 3/4 7/8 7/8 7/8 7/8 1600 2000 3/8 3/8 7/8 7/8 KIT 920265 920265 920265 920265 920265 920265 920265 920266 920266 920266 920267 920267 920267 NOTES: 1. Refer er to sales specification sheets for Listed/Certified tified combinations of equipment and required accessories. 2. X in the model description designates factory installed TXV for R-410a refrigerant. 3. Refer er to the current AHRI Directory for certified ratings of split systems. 513
EVAPORATOR COILS Horizontal Cased Coil Cased Coil 19 1 /2/ 16 3 /8/ Dimension DRAIN PAN DIMENSIONS A Cabinet B Cabinet C Cabinet D Cabinet W 12 3/4 16 19 1/2 23 B 6 5/8 9 7/8 12 3/8 16 7/8 B W Drain Pan Bottom View 514
EVAPORATOR COILS 3 1/8 HS HL 19 1/2 2 1/2 W C6 FLEXIBLE UNCASED COIL DATA (SEE FIGURE 2) Coil Model C6BA F24-A F36-A F24-B Figure 2. Uncased coil F36-B F42-B F48-C F60-C F48-D F60-D Face Area (ft^2) Rows Fins per inch W - Width (in.) 4.18 3 14 12 3/4 4.18 3 14 12 3/4 4.18 3 14 16 4.18 3 14 16 5.58 3 14 16 5.58 3 14 19 1/2 6.42 3 14 19 1/2 5.58 3 14 23 6.42 3 14 23 H - Height (in.) 19 19 19 19 24 3/4 23 3/4 28 3/4 24 28 1/4 HL - Height of Liquid Line (in.) 17 1/2 17 1/2 17 1/2 17 1/2 23 1/2 23 1/2 27 27 27 HS - Height of Suction Line (in.) 15 1/2 15 1/2 15 1/2 15 1/2 21 1/2 21 1/2 25 25 25 Connection - Liquid Line 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 Connection - Suction Line 3/4 3/4 3/4 3/4 7/8 7/8 7/8 7/8 7/8 Horizontal Drain Kit 920265 920265 920265 920265 920266 920266 920267 920266 920267 C6 TXV INSTA ALLED UNCASED COIL DATA (SEE FIGURE 2) Coil Model C6BA, T24-A T30-A T24-B T30-B T36-B T42-B T36-C T42-C T48-C T60-C T42-D T48-D T60-D C6BH X24-A X30-A X35-A X24-B X26-B X30-B X35-B X36-B X42-B X47-B X30-C X36-C X37-C X42-C X47-C X48-C X60-C X42-D X48-D X60-D Face Area (ft^2) 4.18 4.18 4.18 4.18 5.58 4.18 4.18 5.58 5.58 5.58 4.18 5.58 6.42 5.58 5.58 6.42 6.42 5.58 6.42 6.42 Rows 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 Fins per inch 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Metering Device TXV TXV TXV TXV TXV TXV TXV TXV TXV TXV TXV TXV TXV TXV TXV TXV TXV TXV TXV TXV Nominal Airflow (CFM) 800 1,000 1,000 800 1,200 1,000 1,200 1,200 1,400 1,200 1,000 1,200 1,200 1,400 1,400 1,600 2,000 1,400 1,600 2,000 Pressure drop at nom airflow (in. wc) 0.12 0.30 0.30 0.12 0.21 0.15 0.21 0.21 0.30 0.30 0.16 W - Width (in.) 12 3/4 12 3/4 12 3/4 16 16 16 16 16 16 16 19 1/2 H - Height (in.) 19 19 19 19 24 3/4 19 19 24 3/4 24 3/4 24 3/4 23 3/4 HL - Height of Liquid Line (in.) 17 1/2 17 1/2 17 1/2 17 1/2 23 1/2 17 1/2 17 1/2 23 1/2 23 1/2 23 1/2 23 1/2 HS - Height of Suction Line (in.) 15 1/2 15 1/2 15 1/2 15 1/2 21 1/2 15 1/2 15 1/2 21 1/2 21 1/2 21 1/2 21 1/2 Connection - Liquid Line 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 Connection - Suction Line 3/4 3/4 3/4 3/4 3/4 3/4 3/4 7/8 7/8 7/8 3/4 Horizontal Drain Kit 920265920265920265 920265920266920265920265920266920266920266 920266 0.21 0.17 0.30 0.30 0.30 23 1/2 27 23 1/2 23 1/2 27 0.30 0.30 0.30 0.30 19 1/2 19 1/2 19 1/2 19 1/2 19 1/2 19 1/2 23 23 23 23 3/4 28 3/4 23 3/4 23 3/4 28 3/4 28 3/4 24 28 1/4 28 1/4 21 1/2 25 21 1/2 21 1/2 25 3/8 3/8 3/8 3/8 3/8 7/8 7/8 7/8 7/8 7/8 920266 920267 920266 920266 920267 27 27 27 27 25 25 25 25 3/8 3/8 3/8 3/8 7/8 7/8 7/8 7/8 920267 9202669202679202679 515
EVAPORATOR COILS Figure 3. Cased Coil C6 FLEXIBLE CASED COIL DIMENSIONS WITH ANTEATER COIL TECHNOLOGY (SEE FIGU RES 3-6) M ANUFA ACTURED AFTER OCTOBER 2010 Cabinet Identifier W C6BA-F 24, 36 A 14 1/4 C6BA-F 24, 36 B 17 1/2 C6BA-F C6BA-F C6BA-F C6BA-F 42 48 60 48, 60 B C C D 17 1/2 21 21 24 1/2 Overall Top Opening H OW 26 3/4 12 7/8 26 3/4 16 1/8 26 3/4 16 1/8 26 3/4 19 5/8 30 1/4 19 5/8 30 1/4 23 1/8 Bottom Opening Horizontal Drain Pan Extension C (Fig 4&5) B (Fig 6) 6 5/8 5 3/4 8 3/8 5 3/4 8 3/8 5 3/4 11 7/8 2 3/4 11 7/8 3 1/4 15 3/8 3 1/4 C6 FLEXIBLE CASED COIL DIMENSIONS WITH STANDARD COPPE ER (SEE FIGU RES 3-6) MANUFA ACTURED PRIOR TO OCTOBER 2010 Cabinet Identifier W C6BA-F 24, 36 A 14 1/4 C6BA-F 24, 36 B 17 1/2 C6BA-F C6BA-F C6BA-F C6BA-F 42 48 60 48, 60 B C C D 17 1/2 21 21 24 1/2 Overall Top Opening H OW 20 3/4 12 7/8 20 3/4 16 1/8 26 3/4 16 1/8 26 3/4 19 5/8 30 1/4 19 5/8 30 1/4 23 1/8 Bottom Opening Horizontal Drain Pan Extension B (Fig 6) C (Fig 4&5) 6 5/8 5 3/4 8 3/8 5 3/4 8 3/8 5 3/4 11 7/8 2 3/4 11 7/8 3 1/4 15 3/8 3 1/4 Line Set HL HS 23 1/2 21 1/2 23 1/2 21 1/2 23 1/2 21 1/2 23 1/2 21 1/2 27 25 27 25 Line Set HL HS 17 1/2 15 1/2 17 1/2 15 1/2 23 1/2 21 1/2 23 1/2 21 1/2 27 25 27 25 C6 TXV INST STALLED CASED COIL DIMENSIONS (SEE FIGURES 3-6) Cabinet Identifier W C6BA-(T,X) C6BH-(T,X) C6BA-(T,X) C6BA-(T,X) *24, *30, *35 *24, *30, *35 *24, *30, *35 *26, *36, *42 A A B B 14 1/4 14 1/4 17 1/2 17 1/2 C6BH-(T,X) *24, *30, *35 B 17 1/2 C6BH-(T,X) *26, *36, *42 B 17 1/2 C6BA-(T,X) *30, *36, *42 C 21 C6BH-(T,X) *30, *36, *42 C 21 C6BA-(T,X) *37 *48, *60 C 21 C6BH-(T,X) *37 *48, *60 C 21 C6BA-(T,X) *42, *48, *60 D 24 1/2 C6BH-(T,X) *42, *48, *60 D 24 1/2 Overall Top Opening H OW 20 3/4 12 7/8 26 3/4 12 7/8 20 3/4 16 1/8 26 3/4 16 1/8 26 3/4 16 1/8 26 3/4 16 1/8 26 3/4 19 5/8 26 3/4 19 5/8 30 1/4 19 5/8 30 1/4 19 5/8 30 1/4 23 1/8 30 1/4 23 1/8 Bottom Opening Horizontal Drain Pan Extension B (Fig 6) C (Fig 4&5) 6 5/8 5 3/4 6 5/8-8 3/8 5 3/4 8 3/8 5 3/4 8 3/8 2 3/4 8 3/8 2 3/4 11 7/8 2 3/4 11 7/8 2 3/4 11 7/8 3 1/4 11 7/8 3 1/4 15 3/8 3 1/4 15 3/8 3 1/4 Line Set HL HS 17 1/2 15 1/2 23 1/2 21 1/2 17 1/2 15 1/2 23 1/2 21 1/2 23 1/2 21 1/2 23 1/2 21 1/2 23 1/2 21 1/2 23 1/2 21 1/2 27 25 27 25 27 25 27 25 516
EVAPORATOR COILS C C 19 1 /2/ Figure 4. C6 Horizontal Left Configuration Figure 5. C6 Horizontal Right Configuration with Drain Pan Extension with Drain Pan Extension 16 3 /8/ DRAIN PAN BOTTOM OM VIEW (SEE FIGURE 6) A B C D Dimension Cabinet Cabinet Cabinet Cabinet W 12 3/4 B 6 5/8 16 19 1/2 23 9 7/8 12 3/8 16 7/8 B W Figure 6. Drain Pan Dimensions TXV Kits 920662A R-22 2.0T 920663A R-22 2.5T 920664A R-22 3.0T 920665A R-22 3.5T 920666A R-22 4.0T 920667A R-22 5.0T 920668A R-410a 2.0T 920669A R-410a 2.5T 920670A R-410a 3.0T 920671A R-410a 3.5T 920672A R-410a 4.0T 920673A R-410a 5.0T 517
EVAPORATOR COILS C3-M, C4-M, C5-M Uncased Indoor Replacement Coils (REPLCOIL-M) "A" Coil Features Micro-Channel Anteater TM Coil Technology: The Micro-Channel Anteater coil is an all aluminum design to prevent leaks caused by formicary corrosion. 518
COIL DATA TABLES EVAPORATOR COILS ReplCoil01M ReplCoil02M ReplCoil03M ReplCoil04M ReplCoil05M ReplCoil06 Face Area (ft^2) 3.47 3.47 4.93 4.93 5.89 2.75 Rows 1 1 1 1 1 2 Fins per Inch 20 20 20 20 20 12 Refrigerant Flow Control Fixed Orifice Factory Installed Orifice Size 0.067 0.067 0.080 0.093 0.099 0.060 Width, in. 12-3/4 18-1/8 18-1/8 21-1/16 21-1/16 12-3/4 Height, in. 19 19 25 25 28-3/4 13 Connection, Liquid 3/8 3/8 3/8 3/8 3/8 3/8 Connection, Suction 3/4 3/4 7/8 7/8 7/8 3/4 Coil Type Micro-Channel Micro-Channel Micro-Channel Micro-Channel Micro-Channel Tube & Fin ReplCoil07M 3.47 1 20 0.093 21-1/16 19 3/8 3/4 Micro-Channel (1) Orifice size shown is for 10 SEER rating with FS3BA outdoor unit. * Orifice size shown is for 10 SEER 2-1/2 Ton. (2) Replcoil06 features Anteater TM Coil Technology, made with uniguard alloy to prevent leaks caused by formicary corrosion. ACCESSORIES DA Kit - 921337 QA Kit - 921339 TXV Kits 920662A 920663A 920664A 920665A 920666A 920667A 920668A 920669A 920670A 920671A 920672A 920673A R-22 2.0T R-22 2.5T R-22 3.0T R-22 3.5T R-22 4.0T R-22 5.0T R-410a 2.0T R-410a 2.5T R-410a 3.0T R-410a 3.5T R-410a 4.0T R-410a 5.0T Tube Kits 921732 921733 921734 921735 921736 Kit, REPL Tube A18 Kit, REPL Tube B18 Kit, REPL Tube B24 Kit, REPL Tube C24 Kit, REPL Tube C28 Horizontal Drain Pan Kit for Original C3, C4, & C5 Cased Coils 919318 Horizontal Drain Pan Kit (REPLCOIL 01, 02, 06, 07) 919319 Horizontal Drain Pan Kit (REPLCOIL 03, 04) 919320 Horizontal Drain Pan Kit (REPLCOIL 05) NOTE: Please reference erence the appropriate air handler TSL in regards to the proper horizontal drain pan for air handler applications REPLCOIL Cased Wrappers SKU 919330 919331 919332 919333 919334 919335 Cabinet Overall Width Overall Height A 14.25" 20.0" A 14.25" 26.0" B 19.75" 20.0" B 19.75" 26.0" C 22.50" 26.0" C 22.50" 29.0" 519
EVAPORATOR COILS ORIGINAL MODEL IDENTIFICATION CODE C 3 BA 036 U B Coil Design Series (C3, C4, C5) Cabinet Identifier A = 14-1/4" Width B = 19-3/4" Width C = 22-1/2" Width U = Uncased Coil BA = A Coil Nominal Capacity (000) Btuh 19 1 /2/ 16 3 /8/ B W Figure 1. Drain Pan Dimensions Dimension W B See Figure 1. "A" Cabinet "B" Cabinet 12 3/4 18 1/8 6 5/8 10 5/8 "C" Cabinet 21 1/16 13 5/8 520
EVAPORATOR COILS 19 1 /2/ 16 3 / /8 Dimension DR AIN PAN DIMENSIONS A Cabinet B Cabinet C Cabinet W 12 3/4 16 19 1/2 B 6 5/8 9 7/8 12 3/8 D Cabinet 23 16 7/8 B W Cased Coil Height Drain Pan Bottom View SKU Model Number 921515 C7BAM01824C-A Cabinet SKU 920256 Liquid Line Tube kits COIL HEIGHT CABINET LIQUID LINE TUBE KIT 18 A 921824 18 B 921825 24 B 921826 18 C 921827 24 C 921828 28 C 921829 24 D 921830 28 D 921831 TXV Kits 920662A R-22 2.0T 920663A R-22 2.5T 920664A R-22 3.0T 920665A R-22 3.5T 920666A R-22 4.0T 920667A R-22 5.0T 920668A R-410a 2.0T 920669A R-410a 2.5T 920670A R-410a 3.0T 920671A R-410a 3.5T 920672A R-410a 4.0T 920673A R-410a 5.0T 921519 921661 921663 921700 C7BAM01824C-B C7BHM01824C-A C7BHM01824C-B C7BAM030C-C 921701 C7BHM030C-C 921517 C7BAM03036C-A 921521 C7BAM03036C-B 921662 C7BHM03036C-A 921664 C7BHM03036C-B 921523 C7BAM03642C-B 921665 C7BHM03642C-B 921525 C7BAM03648C-C 921666 C7BHM03648C-C 921529 C7BAM042C-D 921668 C7BHM042C-D 921838 C7BAM048C-C 921841 C7BAM048C-D 921839 C7BHM048C-C 921842 C7BHM048C-D 921527 C7BAM04860C-C 921667 C7BHM04860C-C 922116 C7BAM060C-C 922119 C7BAM060C-D 922117 C7BHM060C-C 920258 920257 920259 920260 920260 920256 920258 920257 920259 920259 920259 920260 920260 920262 920262 920261 920262 920261 920262 920261 920261 920261 920262 920261 922120 C7BHM060C-D 920262 521
COILS AIRMAX REPLACEMENT COILS Outstanding Features: Replacement coils for Airmax Systems High quality materials Adherence to industrial standards Cased (y or n) Dimensions (in) H W D CAC24G Y 14 14-1/4 21 450.00 AC24G N 12 13 19-1/2 375.00 CAC30G Y 18 14-1/4 21-1/4 520.00 AC30G N 14 15 19-1/2 420.00 AC36G N 16 15 19-1/2 450.00 AC42G N 18 17 19-1/2 540.00 AC48G N 18 17 19-1/2 750.00 AC60G N 20 20 19-1/2 790.00 522
GAS FURNACE FG7S (A AND K SERIES) High Efficiency Upflow/Horizontal and Downflow Gas Furnaces Induced Draft - 80+ AFUE Input 45,000-126,000 Btuh 100% fired and tested: All units and each component are tested on the manufacturing line. Best packaging in the industry: Unique corner post design assures product will arrive to the homeowner dent free. 30 second post purge: Increases life of heat exchanger. Hot surface igniter: Innovative application of a silicon nitride type igniter. Utilizes proven Smartlite technology. Color coded wire harness: Designed to fit the components, all with quickconnect fittings for ease of Model Input (Btuh) service and replacement. Low Boy Height: Easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install. Tubular Primary Heat Exchanger: Heavy gauge aluminized steel heat exchanger and stainless steel secondary heat exchanger assures a long life. 90 Second Fixed Cooling Cycle Blower-Off Delay (TDR): Increases cooling performance when matched with a Nordyne coil. 30 second blower delay: At start-up assures a warm duct temperature at furnace startup. Adjustable blower off settings (60, 90, 120, and 180 seconds). High Static Blowers: All models equipped with high static blowers. LP Convertible: Simple burner Heating Capacity (Btuh) AFUE Blower D x W orifice change for ease of convertibility. Diagnostic lights for easy troubleshooting without counting flashes: Dedicated light for flame signal strength and 2 lights in combination to indicate all other fault codes with easy to recognize states without counting flashes. Integrated Control Board: incorporates connections for electronic air cleaner and humidifier. Two piece door design: Enhances furnace appearance and uses captured screws to prevent losing door screws. Blower Compartment: Sealed door to reduce air leakage and insulated for ultra quiet operation Multi-Speed Direct Drive Blower: Designed to give a wide range of cooling capacities. Switches on PCB, provide ultra easy motor Motor H.P Speed - Type Motor FLA Rated Ext. SP - In. W.C. speed selection. Flexible Category I Venting System: May be vented with dedicated venting system or common vented with other category one appliances. High Efficiency Blower Kits: Maximize efficiencies. On select units, a SEER improvement of up to 1 point is realized. Temp Rise Range (ºF) Shipping Wt (lbs) FG7SA-045-23A 45000 36000 80 10x6 1/3-4 - PSC 4.80 0.5 30-60 100 % FG7SA-054-23A 54000 43200 80 10x6 1/3-4 - PSC 4.80 0.5 30-60 100 % FG7SA-072-24B 72000 57600 80 11x8 1/2-4 - PSC 8.20 0.5 35-65 110 % FG7SA-090-24B 90000 72000 80 11x8 1/2-4 - PSC 8.20 0.5 35-65 115 % FG7SA-072-35C 72000 57600 80 10x10 1/2-4 - PSC 7.50 0.5 35-65 115 % FG7SA-090-35C 90000 72000 80 10x10 1/2-4 - PSC 7.50 0.5 35-65 120 % FG7SA-108-35C 108000 86400 80 11x10 1.0-4 - PSC 13.75 0.5 40-70 125 % FG7SA-126-45D 126000 100800 80 11x10 1.0-4 - PSC 13.75 0.5 40-70 145 % FG7SK-054-23A 54000 43200 80 10x6 1/3-4 - PSC 4.80 0.5 30-60 100 % FG7SK-072-24B 72000 57600 80 11x8 1/2-4 -PSC 8.20 0.5 35-65 110 % FG7SK-090-24B 90000 72000 80 11x8 1/2-4 - PSC 8.20 0.5 35-65 115 % FG7SK-108-35C 108000 86400 80 11x10 3/4-4 - PSC 13.75 0.5 40-70 125 % FG7SK-126-45D 126000 100800 80 11x10 1.0-4 - PSC 13.75 0.5 40-70 145 % 523
GAS FURNACE FG7S (C AND L SERIES) High Efficiency/Direct Vent or Non Direct Vent Single Stage Condensing Upflow/Horizontal and Downflow Gas Furnaces Induced Draft - 92.1 AFUE Input 38,000-120,000 Btuh The high efficiency upflow gas furnace may be installed free standing in a utility room, basement, or enclosed in an alcove or closet. Upflow/horizontal units come ready for upflow or horizontal application. The extended flush jacket provides a pleasing appliance appearance. Design certified by CSA for application in Canada and the United States. Model Input (Btuh) Heating Blower AFUE Capacity (Btuh) D x W 100% fired and tested: All units and each component are tested on the manufacturing line. Best packaging in the industry: Unique corner post design assures product will arrive to the homeowner dent free. 30 second post purge: Increases life of heat exchanger. Hot surface igniter: Innovative application of a silicon nitride type igniter. Utilizes proven Smartlite technology. Color coded wire harness: Designed to fit the components, all with quickconnect fittings for ease of service and replacement. Low Boy Height: Easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install. Tubular Primary Heat Exchanger: Heavy gauge aluminized steel heat exchanger and stainless steel secondary heat exchanger assures a long life. 90 Second Fixed Cooling Cycle Blower-Off Delay (TDR): Increases cooling performance when matched with a Nordyne coil. 30 second blower delay: At start-up assures a warm duct temperature at furnace startup. Adjustable blower off Motor H.P Rated Ext. Temp Rise Motor FLA Speed - Type SP - In. W.C. Range (ºF) settings (60, 90, 120, and 180 seconds). High Static Blowers: All models equipped with high static blowers. Shipping Wt (lbs) FG7SC-038D-23A 38000 35000 92.1 10x6 1/3-4 - PSC 4.80 0.5 30-60 100 % FG7SC-054D-24B 54000 49700 92.1 11x8 1/2-4 - PSC 8.20 0.5 30-60 120 % FG7SC-072D-24B 72000 66000 92.1 11x8 1/2-4 - PSC 8.20 0.5 35-65 125 % FG7SC-072D-35C 72000 66000 92.1 10x10 1/2-4 - PSC 7.50 0.5 35-65 130 % FG7SC-090D-35C 90000 82800 92.1 11x10 1.0-4 - PSC 13.75 0.5 35-65 135 % FG7SC-108D-45D 108000 99000 92.1 11x10 1.0-4 - PSC 13.75 0.5 40-70 155 % FG7SC-120D-45D 120000 110400 92.1 11x10 1.0-4 - PSC 13.75 0.5 40-70 155 % FG7SL-054D-24B 54000 49700 92.1 11x8 1/2-4 -PSC 8.20 0.5 30-60 120 % FG7SL-072D-24B 72000 66000 92.1 11x8 1/2-4 -PSC 8.20 0.5 35-65 125 % FG7SL-090D-35C 90000 82800 92.1 10x10 1.0-4 - PSC 7.50 0.5 35-65 135 % FG7SL-120D-45D 120000 110400 92.1 11x10 1.0-4 - PSC 13.75 0.5 40-70 155 % 524
GAS FURNACE Model Input (Btuh) FG7T (T AND A) SERIES Two Stage, Fixed Speed ECM, High Efficiency Upflow/Horizontal and Downflow Gas Furnaces Induced Draft - 95.1 AFUE Input 60,000-120,000 Btuh The high efficiency upflow gas furnace may be installed free standing in a utility room, basement, or enclosed in an alcove or closet. Upflow/horizontal units come ready for upflow or horizontal application. The extended flush jacket provides a pleasing appliance appearance. Design certified by CSA for application in Canada and the United States. Heating Capacity (Btuh) AFUE Blower D x W i SEER: Energy efficient brushless DC (ECM) motor gives up to 1 SEER point efficiency gain in cooling. 100% fired and tested: All units and each component are tested on the manufacturing line. Best packaging in the industry: Unique corner post design assures product will arrive to the homeowner dent free. 30 second post purge: Increases life of heat exchanger. Hot surface igniter: Innovative application of a silicon nitride type igniter. Utilizes proven Smartlite technology. Motor H.P Speed - Type Motor FLA Rated Ext. SP - In. W.C. Color coded wire harness: Designed to fit the components, all with quickconnect fittings for ease of service and replacement. Low Boy Height: Easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install. Tubular Primary Heat Exchanger: Heavy gauge aluminized steel heat exchanger and stainless steel secondary heat exchanger assures a long life. Temp Rise Range (ºF) Shipping Wt (lbs) FG7TA/TK-060C-VA1 60000 / 39000 48000 / 31200 80.0 10x6 1/2 - Variable 6.2 0.5 25-55 115 % FG7TA/TK-080C-VB1 80000 / 52000 64000 / 41600 80.0 11x8 1/2 - Variable 6.2 0.5 30-60 110 % FG7TA/TK-100C-VC1 100000 / 65000 80000 / 52000 80.0 11x10 3/4 - Variable 8.7 0.5 35-65 125 % FG7TA/TK-120C-VC1 120000 / 78000 96000 / 62400 80.0 11x10 3/4 - Variable 8.7 0.5 35-65 135 % FG7TA/TK-140C-VD1 140000 / 91000 112000 / 72800 80.0 11x10 1 - Variable 11.7 0.5 40-70 155 % 525
GAS FURNACE FG7T (C AND L) VS SERIES Two Stage, Variable Speed, Condensing Upflow/Horizontal and Downflow Gas Furnaces Induced Draft - 95.1 AFUE Input 60,000-120,000 Btuh The high efficiency upflow gas furnace may be installed free standing in a utility room, basement, or enclosed in an alcove or closet. Upflow/horizontal units come ready for upflow or horizontal application. The extended flush jacket provides a pleasing appliance appearance. Design certified by CSA for application in Canada and the United States. i SEER: Energy efficient brushless DC (ECM) motor gives up to 1 SEER point efficiency gain in cooling. Model Heating Capacity (Btuh) AFUE Blower D x W Motor H.P Speed - Type 100% fired and tested: All units and each component are tested on the manufacturing line. Best packaging in the industry: Unique corner post design assures product will arrive to the homeowner dent free. 30 second post purge: Increases life of heat exchanger. Hot surface igniter: Innovative application of a silicon nitride type igniter. Utilizes proven Smartlite technology. Color coded wire harness: Designed to fit the components, all with quickconnect fittings for ease of service and replacement. Low Boy Height: Easy to apply in low ceiling applications, works well with taller high SEER coils, easier Motor FLA Rated Ext. SP - In. W.C. to handle and install. Tubular Primary Heat Exchanger: Heavy gauge aluminized steel heat exchanger and stainless steel secondary heat exchanger assures a long life. 90 Second Fixed Cooling Cycle Blower-Off Delay (TDR): Increases cooling performance when matched with a Nordyne coil. 30 second blower delay: At start-up assures a warm duct temperature at furnace startup. Adjustable blower off settings (60, 90, 120, and 180 seconds). High Static Blowers: All models equipped with high static blowers. LP Convertible: Simple burner orifice change for ease of convertibility. Temp Rise Range (ºF) Shipping Wt (lbs) FG7TC/TL-060D-VB 57000 / 37050 95.1 11x8 1/2 - Variable 6.2 0.5 30-60 125 % FG7TC/TL -080D-VC 76000 / 49400 95.1 11x10 3/4 - Variable 8.7 0.5 35-65 135 % FG7TC/TL -100D-VC 95000 / 61750 95.1 11x10 3/4 - Variable 8.7 0.5 35-65 145 % FG7TC/TL -120D-VD 114000 / 74100 95.1 11x10 1 - Variable 11.70 0.5 40-70 160 % 526
GAS FURNACE Model Input (Btuh) FG7MQ SERIES Fully Modulating, Variable Speed, Condensing Upflow/Horizontal Gas Furnaces Induced Draft - 97.0 AFUE Input 60,000-120,000 Btuh The high efficiency upflow gas furnace may be installed free standing in a utility room, basement, or enclosed in an alcove or closet. Upflow/horizontal units come ready for upflow or horizontal application. The extended flush jacket provides a pleasing appliance appearance. Design certified by CSA for application in Canada and the United States. Heating Capacity (Btuh) iseer: Energy efficient brushless DC (ECM) motor gives up to 1 SEER point efficiency gain in cooling. Modulating Heating Operation Includes: - Modulating gas valve from 100% to 50% input in 5% increments. - Time proportioning modulation down to 15%. - Variable speed inducer and blower. 100% fired and tested: All units and each component are tested on the manufacturing line. AFUE Blower D Motor H.P Speed Motor FLA x W - Type Rated Ext. SP - In. W.C. Best packaging in the industry: Unique corner post design assures product will arrive to the homeowner dent free. 30 second blower delay: At start-up assures a warm duct temperature at furnace startup. Adjustable blower off settings (60, 90, 120, and 180 seconds). 30 second post purge: Increases life of heat exchanger. Hot surface igniter: Innovative application of a silicon nitride type igniter. Utilizes proven Smartlite technology. Temp Rise Range (ºF) Shipping Wt (lbs) FG7MQ-060D-VB 60,000/30,000 58,200/29,100 97.0 11 x 8 1/2 - Variable 6.2 0.5 30-60 130 % FG7MQ-080D-VC 80,000/40,000 77,600/38,800 97.2 11 x 10 3/4 - Variable 8.7 0.5 35-65 140 % FG7MQ-100D-VC 100,000/50,000 97,000/48,500 97.4 11 x 10 3/4 - Variable 8.7 0.5 35-65 150 % FG7MQ-120D-VD 120,000/60,000 116,400/58,200 97.0 11 x 10 1 - Variable 11.7 0.5 40-70 165 % 527
AIR HANDLERS B6BMMO SERIES - 13 SEER RESIDENTIAL SYSTEM 18,000-60,000 Btuh (Heat Pump & Air Conditioner) The B6BMM0 Series of air handlers, when combined with our heat pump or air conditioner, offer a full line of quality, split system heating and cooling. This product carries a 5-year all parts warranty. When installed with a matched outdoor unit, the air handler will carry the outdoor system warranty. Durable, Attractive Cabinet: Galvanized steel with a polyester urethane finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units. The Plastic drain pan is corrosion-resistant. Multi-poised: Can be used in horizontal, upflow, downflow, and vertical applications. Multi-speed: Gives flexibility of installation. Ease of Service: Plug-in wire connections and built-in filter rack makes the air handler easy to service. Plug-in Heater Kits: Available in 5kw-30kw (Not for use in 115 Volt units) Circuit Board: Incorporating blower time delay relay, low voltage terminal strip, and heat-strip sequencing. Air Handler Control Board: Controls timesequencing of heat stages with field-selectable sequence timing. Breaker Accessibility: Breaker accessible from front of unit when heater is applied. Model H Dimensions (in) W Nom. Cooling Capacity (BTUh) Max. Aux. Heat Shipping Wt (lbs) B6BMMO*24K-A 43-5/16 14-3/16 24000 10 80 828.00 B6BMMO*30K-A 43-5/16 14-3/16 30000 15 82 976.00 B6BMMO*24K-B 43-5/16 19-11/16 24000 10 98 930.00 B6BMMO*30K-B 43-5/16 19-11/16 30000 20 101 992.00 B6BMMO*36K-B 43-5/16 19-11/16 36000 20 101 1018.00 B6BMMO*42K-B 49-5/16 19-11/16 42000 20 119 1156.00 B6BMMO*48K-B 49-5/16 19-11/16 48000 20 119 1174.00 B6BMMO*48K-C 55-15/16 22-7/16 48000 30 137 1200.00 B6BMMO*60K-C 55-5/16 22-7/16 60000 30 142 1592.00 528
AIR HANDLERS B6BMMX SERIES - 14 SEER RESIDENTIAL SYSTEM 18,000-60,000 Btuh (Heat Pump & Air Conditioner The B6BMMX series of air handlers, when combined with our heat pump or air conditioner, offer a full line of quality, split system heating and cooling equipment.. Durable, Attractive Cabinet: Galvanized steel with a polyester urethane finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units. The Plastic drain pan is corrosion-resistant. Multi-poised: Can be used in horizontal, upflow, downflow, and vertical applications. Multi-speed: Gives flexibility of installation. Ease of Service: Plug-in wire connections and built-in filter rack makes the air handler easy to service. Plug-in Heater Kits: Available in 5kw-30kw (Not for use in 115 Volt units) Circuit Board: Incorporating blower time delay relay, low voltage terminal strip, and heat-strip sequencing. Air Handler Control Board: Controls timesequencing of heat stages. Breaker Accessibility: Breaker accessible from front of unit when heater is applied. Model H Dimensions (in) W Nom. Cooling Capacity (BTUh) Max. Aux. Heat Shipping Wt (lbs) B6BMM*X24K-A 43-5/16 14-3/16 24000 15 87 968.00 B6BMM*X30K-A 43-5/16 14-3/16 30000 15 90 1114.00 B6BMM*X24K-B 43-5/16 19-11/16 24000 20 107 1070.00 B6BMM*X30K-B 43-5/16 19-11/16 30000 20 110 1130.00 B6BMM*X36K-B 49-5/16 19-11/16 36000 20 110 1156.00 B6BMM*X42K-B 49-5/16 19-11/16 42000 20 130 1294.00 B6BMM*X48K-C 55-15/16 22-7/16 48000 30 150 1408.00 B6BMM*X60K-C 55-15/16 22-7/16 60000 30 155 1730.00 529
AIR HANDLERS B6EMMX SERIES - AIR HANDLER WITH TXV - 14-15 SEER RESIDENTIAL SYSTEM 18,000-60,000 Btuh (Heat Pump & Air Conditioner) R-410A Refrigerant Energy Efficient Fixed Speed ECM Motor: Provides 16 field-selectable cooling airflows and 16 field-selectable heating airflows to match any application. Quiet Blower Operation: Extra quiet and smooth blower on and off cycles. Reduced air stratification: This results in improved air quality by optimizing humidity removal and filtration capabilities. Multi-poised: Can be used in horizontal, upflow, downflow, and vertical applications. Built in Filter Rack: Makes their air handler easy to service. Plug-in Heater Kit: Available in 5kw through 30kw (Not for use in 115 Volt units) Circuit Board: Incorporating blower time delay relay, low voltage terminal strip, and heat-strip sequencing. Breaker Accessibility: Breaker accessible from the front of the unit when is heater is applied. Plastic Drain Pan: Provides corrosion resistance. Model D Nom. Blower Size W Refrigerant Flow Control Available Heat (kw) Shipping Wt (lbs) B6EMMX*24K-A 10 6 TXV 15 93 1198.00 B6EMMX*24K-B 11 8 TXV 20 105 1290.00 B6EMMX*30K-A 10 6 TXV 15 95 1274.00 B6EMMX*30K-B 11 8 TXV 20 107 1372.00 B6EMMX*36K-B 11 8 TXV 20 110 1500.00 B6EMMX*42K-B 11 8 TXV 20 117 1612.00 B6EMMX*48K-C 11 10 TXV 30 140 2000.00 B6EMMX*60K-C 11 10 TXV 30 140 2276.00 B6VMAI SERIES 24.5 SEER Residential System Indoor Sections Variable Speed Air Handler C6 Series Residential Indoor Coils with EXV Durable, Attractive Cabinet: Designed using galvanized steel. The door is also galvanized steel, with a polyester urethane finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units. The plastic drain pan is corrosion-resistant. Multi-poised: Can be used in horizontal, upflow, downflow and vertical applications. Increased Efficiencies: Air conditioning efficiencies up to 24.5 SEER. Heat pump efficiencies up to 22 SEER. ECM Variable Speed Motor: Advanced technology allows for automatic selection of cooling airflows and heating airflows to match any application. Quiet Blower Operation: Extra quiet and smooth blower on and off cycles. Reduced air stratification: This results in improved air quality by optimizing humidity removal and filtration capabilities. Model Nominal Cooling Capacity - BTUh Metering Device Max Available Auxilary Heat Blower D x W Motor H.P Speed - Type Height (In.) Width (In.) Shipping Wt (lbs) B6VMAI24K-B 24,000 EXV 20 11 x 8 1/2 - Variable 43-5/16 19-11/16 111 % B6VMAI36K-B 36,000 EXV 20 11 x 8 1/2 - Variable 49-5/16 19-11/16 114 % B6VMAI48K-C 48,000 EXV 30 11 x 10 3/4 - Variable 55-15/16 22-7/16 154 % 530
AIR HANDLERS B6VMAX SERIES - 13-19 SEER RESIDENTIAL SYSTEM Air Handler with TXV 18,000-60,000 Btuh (Heat Pump & Air Conditioner) R-410A Refrigerant Energy Efficient Variable Speed ECM Motor: Advanced technology provides 16 fieldselectable cooling airflows and automatically sets heating airflows based on the amount of installed heat. Quiet Blower Operation: Extra quiet and smooth blower on and off cycles. Constant Airflow: Motor automatically adjusts to different static loads. Reduced Air Stratification: This results in improved air quality by optimizing humidity removal and filtration capabilities. Multi-poised: Can be used in horizontal, upflow, downflow and vertical applications. Built in Filter Rack: makes the air handler easy to service. Plug-in Heater Kit: Available in 5kw 30kw (Not for use in 115 Volt units) Circuit Board: Incorporating blower time delay relay, low voltage terminal strip, and heat-strip sequencing. Breaker Accessibility: Breaker accessible from the front of the unit when heater is applied. Plastic Drain Pan: Provides corrosion resistance. Model D Nom. Blower Size W Refrigerant Flow Control Available Heat (kw) Shipping Wt (lbs) B6VMAX*24K-A 10 6 TXV 15 91 1750.00 B6VMAX*24K-B 11 8 TXV 20 120 1908.00 B6VMAX*30K-A 10 6 TXV 15 91 1878.00 B6VMAX*30K-B 11 8 TXV 20 111 2026.00 B6VMAX*36K-B 11 8 TXV 20 140 2068.00 B6VMAX*42K-B 11 8 TXV 20 140 2204.00 B6VMAX*48K-C 11 10 TXV 30 170 2370.00 B6VMAX*60K-C 11 10 TXV 30 170 2696.00 531
AIR HANDLERS B6VMMX SERIES Air Handler with TXV 18,000-60,000 Btuh R-410A Refrigerant Energy Efficient Variable Speed ECM Motor: Advanced technology provides 16 fieldselectable cooling airflows and automatically sets heating airflows based on the amount of installed heat. Quiet Blower Operation: Extra quiet and smooth blower on and off cycles. Constant Airflow: Motor automatically adjusts to different static loads. Reduced Air Stratification: This results in improved air quality by optimizing humidity removal and filtration capabilities. Multi-poised: Can be used in horizontal, upflow, downflow and vertical applications. Built in Filter Rack: makes the air handler easy to service. Plug-in Heater Kit: Available in 5kw 30kw (Not for use in 115 Volt units) Circuit Board: Incorporating blower time delay relay, low voltage terminal strip, and heat-strip sequencing. Breaker Accessibility: Breaker accessible from the front of the unit when heater is applied. Plastic Drain Pan: Provides corrosion resistance. Durable Cabinet: Galvanized steel with a polyurethane finish. The finish will endure 950 hours of salt spray and resist corrosion 50% better than comparable units. Model D Nom. Blower Size W Refrigerant Flow ControlAvailable Heat (kw) Shipping Wt (lbs) B6VMMX*24K-A 10 6 TXV 15 93 1746.00 B6VMMX*24K-B 11 8 TXV 20 105 1908.00 B6VMMX*30K-A 10 6 TXV 15 95 1878.00 B6VMMX*30K-B 11 8 TXV 20 107 2026.00 B6VMMX*36K-B 11 8 TXV 20 110 2068.00 B6VMMX*42K-B 11 8 TXV 20 117 2204.00 B6VMMX*48K-C 11 10 TXV 30 140 2370.00 B6VMMX*60K-C 11 10 TXV 30 140 2696.00 B6BW SERIES - 13 SEER RESIDENTIAL OR MULTI-FAMILY SYSTEM 1.5-3.0 Tons (Air Conditioner) Durable, Attractive Cabinet: Designed using galvanized steel with optional white decorative panel. The plastic drain pan is corrosion resistant. Multi-speed: Gives flexibility of installation. Blower Control Board: Incorporating blower time delay. Ease of Service: Plug-in wire connections and built-in filter rack makes the air handler easy to service. Heater Kits Installed: Available in 5kw, 8kw, & 10kw. Breaker Accessibility: Breaker accessible from front of unit. Fully Insulated Cabinet: For quiet operation. Front and/or Bottom Return Air Offset Hanging Bracket for Easy Installation Model H Dimensions (in) W Nom. Cooling Capacity (BTUh) Available Heat (kw) Shipping Wt (lbs) B6BW*018 36 3/8 15 17200 5, 8 80 % B6BW*024 36 3/8 15 24000 5, 8, 10 80 % B6BW*030 43 1/2 15 27600 5, 8, 10 88 % B6BW*036 43 1/2 21 33000 5, 8, 10 92 % 532
AIR HANDLERS B6EMMX SERIES - AIR HANDLER WITH TXV - 14-15 SEER RESIDENTIAL SYSTEM 18,000-60,000 Btuh (Heat Pump & Air Conditioner) R-410A Refrigerant Energy Efficient Fixed Speed ECM Motor: Provides 16 field-selectable cooling airflows and 16 field-selectable heating airflows to match any application. Quiet Blower Operation: Extra quiet and smooth blower on and off cycles. Reduced air stratification: This results in improved air quality by optimizing humidity removal and filtration capabilities. Multi-poised: Can be used in horizontal, upflow, downflow, and vertical applications. Built in Filter Rack: Makes their air handler easy to service. Plug-in Heater Kit: Available in 5kw through 30kw (Not for use in 115 Volt units) Circuit Board: Incorporating blower time delay relay, low voltage terminal strip, and heat-strip sequencing. Breaker Accessibility: Breaker accessible from the front of the unit when is heater is applied. Plastic Drain Pan: Provides corrosion resistance. Model D Nom. Blower Size W Refrigerant Flow Control Available Heat (kw) Shipping Wt (lbs) B6EMMX*24K-A 10 6 TXV 15 93 1198.00 B6EMMX*24K-B 11 8 TXV 20 105 1290.00 B6EMMX*30K-A 10 6 TXV 15 95 1274.00 B6EMMX*30K-B 11 8 TXV 20 107 1374.00 B6EMMX*36K-B 11 8 TXV 20 110 1500.00 B6EMMX*42K-B 11 8 TXV 20 117 1612.00 B6EMMX*48K-C 11 10 TXV 30 140 2000.00 B6EMMX*60K-C 11 10 TXV 30 140 2276.00 B6EW SERIES - 14 SEER VERTICAL WALL MOUNT Multi-Speed ECM Motor Air Handler TXV Anteater MC TM : Multi-speed: Gives flexibility of installation TXV: Factory installed TXV for precise refrigerant control Plug-in Heater Kits: Available in 5kw, 8kw & 10kw Easy Installation: Offset hanging brackets for ease of installation Ease-of-Service: Plug-in wire connections and built-in filter rack makes the air handler easy to service Breaker Accessibility: Breaker accessible from front of unit when heater is applied Blower Control Board: Incorporating blower time delay Model D Nom. Blower Size W Nom. Cooling Capacity Available Heat (kw) Shipping Wt (lbs) B6EW*X18K 10 6 17200 5, 8 80 % B6EW*X24K 10 6 24000 5, 8, 10 80 % B6EW*X25K 10 6 25000 5, 8, 10 88 % B6EW*X30K 10 6 27600 5, 8, 10 88 % B6EW*X36K 10 8 33000 5, 8, 10 92 % 533
P7RD-A SERIES P7RD-A 13 SEER, R-410A 2 thru 5 Ton Units Cooling: 24,000 to 56,000 Btuh The P7 Series single packaged air conditioners are high efficiency self contained cooling and heating units that can be installed on a slab. Units are ETL and ETLc listed. PACKAGED AIR CONDITIONERS Quality Compressor: State-of-the-art compressor is standard equipment. R-410A Refrigerant: Earth friendly non-ozone depleting refrigerant. Hi Pressure Switched: Ensure long compressor life. Micro-Channel Coils: Both indoor and outdoor all aluminum coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability. ECM Blower Motor: Fixed torque energy efficient brushless DC ECM motor. Permanently Lubricate Condenser Motor: A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow. Model Cooling BTUh SEER Operating Voltage Range Refrigeration Charge R- 410A (Oz.) Low Voltage Transformer: Includes 3 amp fuse to protect low voltage circuit. Liquid Line Filter Driers: Factory installed at a convenient location for service. Dimensions (in) L W H Shipping Weight (lbs) P7RD*024KA 23,800 13 187-253 58 49 35 22.2 244 % P7RD*030KA 28600 13 187-253 57 49 35 22.2 249 % P7RD*036KA 36000 13 187-253 66 49 35 30.2 280 % P7RD*042KA 40500 13 187-253 62 49 35 30.2 297 % P7RD*048KA 47000 13 187-253 57 49 35 30.2 301 % P7RD*060KA 56000 13 187-253 69 49 35 34.2 317 % 534
PACKAGED HEAT PUMPS Q7RD SERIES Single Packaged Heat Pump, Single Phase 13 SEER, R-410A, 2-5 Ton Units Cooling: 24,000-56,000 Btuh Heating: 24,000-54,400 Btuh The Q7 Series single packaged heat pumps are high efficiency self contained cooling and heating units that can be installed on a slab. Units are ETL and ETLc listed. Copeland Compressor: State of the art scroll compressor is standard equipment. R-410A Refrigerant: Environmentally friendly. Designed Using Galvanized Steel: With a polyester urethane coat finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units. A wire guard coated with Earth Friendly Epoxy and mesh hail guard that will never rust: Protects the coil from being damaged by balls, lawnmowers, hail, etc. Suction Accumulator: Protection from liquid flood back and future compressor failures. Liquid Line Filter Driers: Factory installed at a convenient location for service. Low Voltage Transformer: Includes 3 Amp fuse to protect low voltage circuit. Model Number Cooling Btuh Heating BTU/h 47 ºF SEER EER Operating Voltage Range 5 Minute Restart Time Delay: When the unit shuts down, a 5 minute delay keeps the unit from restarting, eliminating the highest cause for compressor failure. Easy Compressor and Control Access: Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit. Easy Access: to the evaporator coil for cleaning and general maintenance. Removable Top Grille Assembly: Allows ease of service to the fan motor. Optional Electric Heat: Field installed 5-20kw. Refrigerant Charge (oz) Length Width Height Q7RD-024K 24,000 24,000 13 11 187-253 144 49 35 30.2 % Q7RD-030K 29,000 28,400 13 11 187-253 138 49 35 30.2 % Q7RD-036K 34,600 34,600 13 11 187-253 144 49 35 30.2 % Q7RD-042K 40,500 40,500 13 11 187-253 132 49 35 30.2 % Q7RD-048K 46,000 44,500 13 11 187-253 179 49 35 34.2 % Q7RD-060K 56,000 54,500 13 10.8 187-253 200 49 35 38.2 % 535
PACKAGED HEAT PUMPS Q5RF SERIES REV A Single Packaged Heat Pump, Single Phase 15 SEER, 12 EER, 8.0 HSPF R-410A, 2 thru 5 Ton Units Cooling: 24,000 to 55,000 Btuh Heating: 22,400 to 56,000 Btuh The Q5 Series single packaged heat pumps are high efficiency self contained cooling and heating units that can be installed on a slab. Units are ETL and ETLc listed. State-of-the-art Copeland Ultra-Tech II Scroll Compressor: provides two stage heat/cool. R-410A Refrigerant: Environmentally friendly. Designed Using Galvanized Steel: With a polyester urethane coat finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units. Both indoor and outdoor coils: are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability. The service valves are easily accessible: And simplify servicing of Model Number Cooling Btuh Heating BTU/h 47 ºF SEER EER Operating Voltage Range the refrigeration system. A wire guard coated with Earth Friendly Epoxy and mesh hail guard that will never rust: Protects the coil from being damaged by balls, lawnmowers, hail, etc. Designed to make servicing easier: For the contractor, access panels are provided to all major components and the compressor. Refrigerant Charge (oz) Length Width Height Q5RF-X24KA 24,000 23,000 15 12 187-253 136 49 35 30.2 % Q5RF-X36KA 34,600 34,600 15 12 187-253 143 49 35 30.2 % Q5RF-X48KA 46,500 44,000 15 12 187-253 189 49 35 38.2 % Q5RF-X60KA 55,000 56,000 15 12 187-253 260 63 35 38.2 % 536
PACKAGED HEAT PUMPS Q6SD SERIES Single Packaged Heat Pump, Single Phase Q6SD-13 SEER, R-410A 2-5 Ton Units Cooling: 22,800 to 58,500 Btuh Heating: 22,800 to 58,500 Btuh The Q6 Series single packaged heat pumps are high efficiency self contained cooling and heating units that can be installed on a roof or on a slab. The convertible unit design makes installations simple in all applications. Units are ETL and ETLc listed. Copeland Compressor: State of the art scroll compressor is standard equipment. Quiet operation and Low Vibration: Swept-wing fan blade combined with custom Venturi condenser fan. R-410A Refrigerant: Environmentally friendly. Designed Using Galvanized Steel: With a polyester urethane coat finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units. A wire guard coated with Earth Friendly Epoxy and mesh hail guard that will never rust: Protects the coil from being damaged by balls, lawnmowers, hail, etc. Model Number Cooling Btuh Operating Heating BTU/h 47 ºF SEER EER Voltage Range Refrigerant Charge (oz) Suction Accumulator: Protection from liquid flood back and future compressor failures. Demand Defrost Standard: Provides additional energy savings in heating by defrosting only when necessary. Copper Tube/Aluminum Fin Coils: Both indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability. Shipping Weight Sound Rating Height w/ base rails Q6SD-X24 23,000 22,800 13.3 11 187-253 99 450 73 39 % Q6SD-X30 27,200 27,000 13.3 11.5 187-253 109 460 73 39 % Q6SD-X36 35,000 33,400 13.5 11.8 187-253 110 470 78 39 % Q6SD-X42 42,000 40,000 13.5 11.5 187-253 213 570 78 43 % Q6SD-X48 46,000 46,000 13.3 11.2 187-253 224 580 78 43 % Q6SD-X60 58,000 59,000 13 11 187-253 224 590 78 43 % 537
GAS-ELECTRIC PACK R8GD SERIES Single Packaged Gas/Electric Units 13 SEER, R-410A, 80% AFUE 2-5 Ton Units The R8GD Series single packaged gas/electrics are high efficiency self contained cooling units that can be installed on the roof or on a slab. The convertible unit design makes installations simple in all applications. Units are ETL and ETLc listed. Quality Compressor: State of the art Copeland Scroll compressor is standard equipment. Proven, Industry Standard Components: Easier service and availability. R-140A Refrigerant: Environmentally friendly. Model Number Heating Input High/Low Btuh High and Low Pressure Switch: Added compressor protection. Micro-Channel Coils: Both indoor and outdoor all aluminum coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability. Liquid Line Filter Driers: Factory installed at a convenient location for service. Externally Accessible Service Ports: Quick access to refrigerant system without disrupting operation. Compact Footprint/Low Profile: Easy to handle and transport. Heavy-Guage Full Perimeter Base Rails: Facilitates forklift handling and curb mounting. Heating Output High/Low Btuh SEER EER Operating Voltage Range Convertible Air Delivery: Horizontal or downflow to accommodate rooftop or horizontal application. Galvanized Steel Cabinet: Polyurethane finish provides 950 hour salt spray protection to resist corrosion. Refrigerant Charge (oz) Height (In.) Wire Guard Coated with Earth Friendly Epoxy and Plastic Mesh Hail Guard: A guard that will never rust and protects the units coil from being damaged. Shipping Weight with base rails R8GD-024K045 45000 36000 13 11 187-253 60 35 413 % R8GD-024K072 72000 57600 13 11 187-253 60 35 421 % R8GD-030K045 45000 36000 13 11 187-253 64 35 414 % R8GD-030K072 72000 57600 13 11 187-253 64 35 422 % R8GD-036K072 72000 57600 13 11 187-253 59 35 419 % R8GD-036K096 96000 76800 13 11 187-253 59 35 427 % R8GD-042K72 72000 57600 13 11 187-253 71 39 453 % R8GD-042K96 96000 76800 13 11 187-253 71 39 461 % R8GD-048K96 96000 76800 13 11 187-253 62 39 470 % R8GD-048K120 120000 96000 13 11 187-253 62 39 478 % R8GD-X60K096 96000 76800 13 11 187-253 64 43 489 % R8GD-X60K120 120000 96000 13 11 187-253 64 43 497 % 538
AIR CONDITIONER SPLIT JS4BD-KB SERIES R-410A High Efficiency Air Conditioner 13 SEER Residential System 1-1/2 5 Ton Capacity Composite Base Pan: Absorbs sound and corrosion resistant. Composite is also stronger and lighter than steel. R-410A Refrigerant: Earth friendly non-ozone depleting refrigerant. Easy Compressor and Control Access: Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit. Removable Top Grille Assembly: Allows ease of service from the top without disconnecting fan motor leads. Permanently Lubricated Motor: A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow. Designed using galvanized steel: with a polyester urethane coat finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units. High Pressure Switch: Protects against abnormally high system pressures. Autoreset feature prevents nuisance service visits. Liquid Line Filter Drier: Included with unit, field installed. One Piece Top/Orifice: Designed for maximum airflow and quiet operation. Complete Metal Wrapper: Durable metal guard protects the coil from yard hazards and extreme weather. Micro-Channel Coils: All aluminum coils in all models which provides high corrosion resistance. Model High Operating Voltage Dimensions (in) Shipping Capacity SEER EER Range Weight (lbs) BTUh D W H JS4BD-018KB 17,600 13 187-253 11 22-3/4 22-3/4 23-1/2 114 1236.00 JS4BD-024KB 23400 13 187-253 11 22-3/4 22-3/4 23-1/2 130 1290.00 JS4BD-030KB 28600 13 187-253 11 22-3/4 22-3/4 27-1/2 144 1452.00 JS4BD-036KB 35000 13 187-253 11 22-3/4 22-3/4 27-1/2 146 1634.00 JS4BD-042KB 40000 13 187-253 11 30-3/4 30-3/4 27-1/2 187 1772.00 JS4BD-048KB 46000 13 187-253 10.9 30-3/4 30-3/4 27-1/2 187 2024.00 JS4BD-060KB 55000 13 187-253 11 30-3/4 30-3/4 31-1/2 197 2328.00 539
GAS-ELECTRIC PACK R6GF SERIES REV A Single Packaged Gas/Electric Units 2-Stage Heat/Cool with Variable Speed Blower and R-410A R6GF 15 SEER 2-5 Ton Units These single packaged gas/electrics are high efficiency self contained cooling units that can be installed on the roof or on a slab. The convertible unit design makes installations simple in all applications. Units are ETL listed. Copeland Ultra-Tech Scroll Compressor: State of the art 2 stage compressor is standard equipment. Model Number Heating Input High/Low Btuh Quiet Operation and Low Vibration: Swept-wing fan blade combined with custom Venturi condenser fan. Compressor Sound Blanket: Is standard equipment. R-410A Refrigerant: Earth friendly non-ozone depleting refrigerant. Wire Guard Coated with Earth Friendly Epoxy and Plastic Mesh Hail Guard: A guard that will never rust and protects the units coil from being damaged. Copper Tube/Aluminum Fin Coils: Both indoor and outdoor coils are designed to optimize heat transfer, Heating Output High/Low Btuh SEER EER minimize size and cost, and increase durability and reliability. Designed using Galvanized Steel: with a polyester urethane coat finish. The 950 hour salt spray finish is 1.5 mil thick and resists corrosion 50% better than comparable units. Smaller Panels, Great Fit and Finish, Total Seal: Welldesigned, quality construction. One Piece Top Pan: With drip edge on top panels whisks away rainwater. Operating Voltage Range Refrigerant Charge (oz) Embossed Bottom Pan: keeps blower component compartment dry. Permanently Lubricated Condenser Motor: A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow. Height (In.) with base rails R6GF-X24K080XA 80,000 / 52,000 64,000 / 41,600 15 12 187-253 131.2 39 55.8 % R6GF-X36K100XA 100,000 / 65,000 80,000 / 52,000 15 12 187-253 128 39 55.8 % R6GF-X48K120XA 120,000 / 72,000 96,000 / 57,600 15 12 187-253 240 47 55.8 % R6GF-X60K120XA 120,000 / 72,000 96,000 / 57,600 15 12 187-253 272 47 63.6 % AIR CONDITIONER SPLIT Length JS4BE SERIES R-410A High Efficiency Air Conditioner 14 SEER Residential System 1-1/2 5 Ton Capacity Designed using galvanized steel: with a polyester urethane coat finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units. Permanently Lubricated Motor: A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow. Composite Base Pan: Absorbs sound and corrosion resistant. Composite is also stronger and lighter than steel. R-410A Refrigerant: Earth friendly non-ozone depleting refrigerant. Easy Compressor and Control Access: Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit. Model Cooling Dimensions (in) Shipping SEER Operating Voltage Range EER BTUh D W H Weight (lbs) JS4BE-018KA 18,000 14 187-253 12.2 22-3/4 22-3/4 27 113 1714.00 JS4BE-024KA 24000 14 187-253 12.2 22-3/4 22-3/4 31 134 1824.00 JS4BE-030KA 29000 14 187-253 12 30-3/4 30-3/4 27 140 1952.00 JS4BE-036KA 34800 14 187-253 12.2 30-3/4 30-3/4 35 155 2102.00 JS4BE-042KA 40500 14 187-253 12.2 30-3/4 30-3/4 39 184 2428.00 JS4BE-048KA 45500 14 187-253 11.7 30-3/4 30-3/4 39 186 2642.00 JS4BE-060KA 57000 14 187-253 11.7 30-3/4 30-3/4 43 196 2932.00 540
AIR CONDITIONER SPLIT JS6BF/JS4BF SERIES Composite Base Pan: Absorbs sound and corrosion resistant. Composite is also stronger and lighter than steel. R-410A Refrigerant: Earth friendly non-ozone depleting refrigerant. Durable, Attractive Cabinet: Designed using galvanized steel with a polyester urethane finish. The 950 hour salt spray finish is 1.5 mil thick and resists corrosion 50% better than comparable units. Removable Top Grille Assembly: Allows ease of service from the top without disconnecting fan motor leads. High Pressure Switch: Protects against abnormally high system pressures. Auto-reset feature prevents nuisance service visits. Liquid Line Filter Drier: Included with unit, field installed. One Piece Top/Orifice: Designed for maximum airflow and quiet operation. Easy Compressor and Control Access: Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit. Model High Speed Capacity (BTUh) SEER Operating Voltage Range EER Dimensions (in) D W H Shipping Weight (lbs) JS6BF-024K 24,000 16 187-253 13 22-3/4 22-3/4 35 171 2620.00 JS6BF-030K 29000 16 187-253 13 30-3/4 30-3/4 27 187 2842.00 JS6BF-036K 34200 16 187-253 13 30-3/4 30-3/4 39 207 3066.00 JS6BF-042K 40000 16 187-253 13 30-3/4 30-3/4 43 217 % JS6BF-048K 46000 16 187-253 13 30-3/4 30-3/4 43 227 % JS4BF-060KC 55000 16 187-253 12.5 30-3/4 30-3/4 43 195 % JT4BD SERIES R-410A High Efficiency Heat Pump 13 SEER Residential System 1 1/2 5 Ton Capacity R-410A Refrigerant: Environmentally friendly. Designed Using Galvanized Steel: With a polyester urethane coat finish. The 950 HEAT PUMP SPLIT hour salt spray finish resists corrosion 50% better than comparable units. Copper Tube/Aluminum Fin Coils: Both indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability. Permanently Lubricated Condenser Motor: A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow. Complete Metal Wrapper: Durable metal guard protects the coil from yard hazards and extreme weather. Model Number Volts-Cycles- Phase (1) Total Amps Delay Fuse Max. (2) Min. Circuit Ampacity Ship Wt (lbs.) Height Width Depth JT4BD-018K 208/230-60-1 10.2 20 12.4 175 31-1/2 30-3/4 30-3/4 1612.00 JT4BD-024K 208/230-60-1 14.6 30 18 180 35-1/2 30-3/4 30-3/4 1728.00 JT4BD-030K 208/230-60-1 15.3 30 18.8 185 39-1/2 30-3/4 30-3/4 1954.00 JT4BD-036K 208/230-60-1 17.8 35 22 190 43-1/2 30-3/4 30-3/4 2178.00 JT4BD-042K 208/230-60-1 19.4 40 23.9 260 39-1/2 30-3/4 30-3/4 2584.00 JT4BD-048K 208/230-60-1 23.2 50 28.7 295 43-1/2 30-3/4 30-3/4 2732.00 JT4BD-060K 208/230-60-1 27.7 60 34.3 305 43-1/2 30-3/4 30-3/4 3026.00 541
HEAT PUMP SPLIT JT4BE SERIES R-410A High Efficiency Heat Pump 14 SEER Residential System 1 1/2 5 Ton Capacity R-410A Refrigerant: Environmentally friendly. Designed Using Galvanized Steel: With a polyester urethane coat finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units. Permanently Lubricated Condenser Motor: A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow. Composite Base Pan: Absorbs sound and is corrosion resistant. Composite is also stronger and lighter than steel. Complete Metal Wrapper: Protects the unit s coil from being damaged. Removable Top Grille Assembly: Allows ease of service to the fan motor. High Pressure Switch: Protects against abnormally high system pressures. Autoreset feature prevents nuisance service visits. Liquid Line Filter Driers: Factory installed at a convenient location for service. One Piece Top/Orifice: Designed for maximum airflow and quiet operation. Model Number Volts-Cycles- Phase (1) Total Amps Delay Fuse Max. (2) Min. Circuit Ampacity Ship Wt (lbs.) Height Width Depth JT4BE-018KA 208/230-60-1 9.9 20 12.1 144 31-1/2 30-3/4 30-3/4 2200.00 JT4BE-024KA 208/230-60-1 14.4 30 17.7 149 31-1/2 30-3/4 30-3/4 2314.00 JT4BE-030KA 208/230-60-1 13.7 25 16.9 158 39-1/2 30-3/4 30-3/4 2556.00 JT4BE-036KA 208/230-60-1 15.1 30 18.6 167 43-1/2 30-3/4 30-3/4 2822.00 JT4BE-042KA 208/230-60-1 19.4 40 23.9 200 43-1/2 30-3/4 30-3/4 3212.00 JT4BE-048KA 208/230-60-1 21.3 45 26.3 202 43-1/2 30-3/4 30-3/4 3520.00 JT4BE-060KA 208/230-60-1 27.7 60 34.3 210 43-1/2 30-3/4 30-3/4 3650.00 542
HEAT PUMP SPLIT JT4BF-KA/B SERIES R-410A Ultra High Efficiency Heat Pump 16 SEER Residential System 2-5 Ton Capacity R-410A Refrigerant: Environmentally friendly. Copeland Scroll Ultra Tech Compressor: Operates with 2 stages of heating and cooling capacities to provide superior comfort and efficiency. Copeland s proven and simple design equates to years of comfort and reliability for the homeowner with virtually silent operation. Model Number Volts-Cycles- Phase (1) Durable, Attractive Cabinet: Designed using galvanized steel with a polyester urethane finish. The 950 hour salt spray finish is 1.5 mil thick and resists corrosion 50% better than comparable units. Composite Base Pan: Absorbs sound and is corrosion resistant. Composite is also stronger and lighter than steel. Copper Tube/Aluminum Fin Coils: Both indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability. Total Amps Delay Fuse Max. (2) Min. Circuit Ampacity Demand Defrost: Provides additional energy savings in heating by defrosting only when necessary. Complete Metal Wrapper: Durable metal guard protects the coil from yard hazards and extreme weather. Removable Top Grille Assembly: Allows ease of service to the fan motor. Low Pressure Switch: Loss of charge protection ensures long compressor life. Autoreset prevents nuisance service visits. High Pressure Switch: Protects against abnormally high system pressures. Autoreset feature prevents nuisance service visits. Ship Wt (lbs.) Height Width Depth JT4BF-024KB 208/230-60-1 11.4 20 14 265 43-1/2 31 31 3212.00 JT4BF-036KA 208/230-60-1 17.9 35 22.1 289 43-1/2 31 31 3738.00 JT4BF-048KA 208/230-60-1 24.0 50 29.3 289 43-1/2 31 31 4604.00 JT4BF-060KA 208/230-60-1 25.9 50 31.7 313 43-1/2 31 31 5040.00 543
GAS FURNACE KG7S (A AND K SERIES) High Efficiency Upflow/Horizontal and Downflow Gas Furnaces Induced Draft - 80+ AFUE Input 45,000-126,000 Btuh 100% fired and tested: All units and each component are tested on the manufacturing line. Best packaging in the industry: Unique corner post design assures product will arrive to the homeowner dent free. 30 second post purge: Increases life of heat exchanger. Hot surface igniter: Innovative application of a silicon nitride type igniter. Utilizes proven Smartlite technology. Color coded wire harness: Designed to fit the components, all with quickconnect fittings for ease of service and replacement. Low Boy Height: Easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install. Tubular Primary Heat Exchanger: Heavy gauge aluminized steel heat exchanger and stainless steel secondary heat exchanger assures a long life. 90 Second Fixed Cooling Cycle Blower-Off Delay (TDR): Increases cooling performance when matched with a Nordyne coil. 30 second blower delay: At start-up assures a warm duct temperature at furnace startup. Adjustable blower off settings (60, 90, 120, and 180 seconds). Model Input (Btuh) Heating Capacity (Btuh) AFUE Blower D Motor H.P Speed Motor FLA x W - Type Rated Ext. SP - In. W.C. Temp Rise Range (ºF) Shipping Wt (lbs) KG7SA-045-23A 45000 36000 80 10x6 1/3-4 - PSC 4.80 0.5 30-60 100 916.00 KG7SA-054-23A 54000 43200 80 10x6 1/3-4 - PSC 4.80 0.5 30-60 100 980.00 KG7SA-072-24B 72000 57600 80 11x8 1/2-4 - PSC 8.20 0.5 35-65 110 1004.00 KG7SA-090-24B 90000 72000 80 11x8 1/2-4 - PSC 8.20 0.5 35-65 115 1100.00 KG7SA-072-35C 72000 57600 80 10x10 1/2-4 - PSC 7.50 0.5 35-65 115 1086.00 KG7SA-090-35C 90000 72000 80 10x10 1/2-4 - PSC 7.50 0.5 35-65 120 1154.00 KG7SA-108-35C 108000 86400 80 11x10 1.0-4 - PSC 13.75 0.5 40-70 125 1236.00 KG7SA-126-45D 126000 100800 80 11x10 1.0-4 - PSC 13.75 0.5 40-70 145 1398.00 KG7SK-054-23A 54000 43200 80 10x6 1/3-4 - PSC 4.80 0.5 30-60 100 962.00 KG7SK-072-24B 72000 57600 80 11x8 1/2-4 -PSC 8.20 0.5 35-65 110 1018.00 KG7SK-090-24B 90000 72000 80 11x8 1/2-4 - PSC 8.20 0.5 35-65 115 1102.00 KG7SK-108-35C 108000 86400 80 11x10 1.0-4 - PSC 13.75 0.5 40-70 125 1172.00 KG7SK-126-45D 126000 100800 80 11x10 1.0-4 - PSC 13.75 0.5 40-70 145 1202.00 544
GAS FURNACE KG7S (C AND L SERIES) High Efficiency/Direct Vent or Non Direct Vent Single Stage Condensing Upflow/Horizontal and Downflow Gas Furnaces Induced Draft - 92.1 AFUE Input 38,000-120,000 Btuh 100% fired and tested: All units and each component are tested on the manufacturing line. Best packaging in the industry: Unique corner post design assures product will arrive to the homeowner dent free. 30 second post purge: Model Input (Btuh) Increases life of heat exchanger. Hot surface igniter: Innovative application of a silicon nitride type igniter. Utilizes proven Smartlite technology. Color coded wire harness: Designed to fit the components, all with quickconnect fittings for ease of service and replacement. Low Boy Height: Easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install. Tubular Primary Heat Exchanger: Heavy gauge aluminized steel heat Heating Capacity (Btuh) AFUE Blower D x W exchanger and stainless steel secondary heat exchanger assures a long life. 90 Second Fixed Cooling Cycle Blower-Off Delay (TDR): Increases cooling performance when matched with a Nordyne coil. 30 second blower delay: At start-up assures a warm duct temperature at furnace startup. Adjustable blower off settings (60, 90, 120, and 180 seconds). High Static Blowers: All models equipped with high static blowers. LP Convertible: Simple burner orifice change for ease of convertibility. Motor H.P Speed - Type Motor FLA Rated Ext. SP - In. W.C. Temp Rise Range (ºF) Shipping Wt (lbs) KG7SC-038D-23A 38000 35000 92.1 10x6 1/3-4 - PSC 4.80 0.5 30-60 100 1442.00 KG7SC-054D-24B 54000 49700 92.1 11x8 1/2-4 - PSC 8.20 0.5 30-60 120 1490.00 KG7SC-072D-24B 72000 66000 92.1 11x8 1/2-4 - PSC 8.20 0.5 35-65 125 1566.00 KG7SC-072D-35C 72000 66000 92.1 10x10 1/2-4 - PSC 7.50 0.5 35-65 130 1662.00 KG7SC-090D-35C 90000 82800 92.1 11x10 1.0-4 - PSC 13.75 0.5 35-65 135 1622.00 KG7SC-108D-45D 108000 99000 92.1 11x10 1.0-4 - PSC 13.75 0.5 40-70 155 1780.00 KG7SC-120D-45D 120000 110400 92.1 11x10 1.0-4 - PSC 13.75 0.5 40-70 155 1884.00 KG7SL-054D-24B 54000 49700 92.1 11x8 1/2-4 -PSC 8.20 0.5 30-60 120 1572.00 KG7SL-072D-24B 72000 66000 92.1 11x8 1/2-4 -PSC 8.20 0.5 35-65 125 1632.00 KG7SL-090D-35C 90000 82800 92.1 10x10 1.0-4 - PSC 7.50 0.5 35-65 135 1834.00 KG7SL-120D-45D 120000 110400 92.1 11x10 1.0-4 - PSC 13.75 0.5 40-70 155 1934.00 545
GAS FURNACE KG7T (A AND K) SERIES Two Stage, Fixed Speed, High Efficiency Upflow/Horizontal and Downflow Gas Furnaces Induced Draft - 80 + AFUE Input 60,000-140,000 Btuh 100% fired and tested: All units and each component are tested on the manufacturing line. Best packaging in the industry: Unique corner post design assures product will arrive to the homeowner dent free. 30 second post purge: Increases life of heat exchanger. Hot surface igniter: Innovative application of a silicon nitride type igniter. Utilizes proven Smartlite technology. Color coded wire harness: Designed to fit the components, all with quickconnect fittings for ease of service and replacement. Low Boy Height: Easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install. Tubular Primary Heat Exchanger: Heavy gauge aluminized steel heat exchanger and stainless steel secondary heat exchanger assures a long life. 90 Second Fixed Cooling Cycle Blower-Off Delay (TDR): Increases cooling performance when matched with a Nordyne coil. 30 second blower delay: At start-up assures a warm duct temperature at furnace startup. Adjustable blower off settings (60, 90, 120, and 180 seconds).change for ease of convertibility. Model Input (Btuh) Heating Blower AFUE Capacity (Btuh) D x W Motor H.P Speed - Type Motor FLA Rated Ext. SP - In. W.C. Temp Rise Range (ºF) Shipping Wt (lbs) KG7TA KG7TK KG7TA/TK-060C-23A1 60000 / 39000 48000 / 31200 80.0 10x6 1/2 - BLDC 6.2 0.5 25-55 104 1340.00 1404.00 KG7TA/TK-080C-24B1 80000 / 52000 64000 / 41600 80.0 11x8 1/2 - BLDC 6.2 0.5 30-60 116 1400.00 1506.00 KG7TA/TK-100C-24B1 100000 / 65000 80000 / 52000 80.0 11x8 1/2 - BLDC 8.7 0.5 30-60 116 1576.00 % KG7TA/TK-100C-35C1 100000 / 65000 80000 / 52000 80.0 11x10 3/4 - BLDC 8.7 0.5 35-65 135 1614.00 1602.00 KG7TA/TK-120C-35C1 120000 / 78000 96000 / 62400 80.0 11x10 3/4 - BLDC 8.7 0.5 35-65 135 1644.00 1678.00 KG7TA/TK-140C-45D1 140000 / 91000 112000 / 72800 80.0 11x10 1 - BLDC 11.7 0.5 40-70 154 1672.00 1756.00 546
GAS FURNACE KG7T (C AND L) SERIES 92.1/95.1, Two Stage, Fixed Speed, High Efficiency Upflow/Horizontal and Downflow Gas Furnaces Induced Draft - 80 + AFUE Input 60,000-140,000 Btuh 100% fired and tested: All units and each component are tested on the manufacturing line. Best packaging in the industry: Unique corner post design assures product will arrive to the homeowner dent free. 30 second post purge: Increases life of heat exchanger. Hot surface igniter: Innovative application of a silicon nitride type igniter. Utilizes proven Smartlite technology. Color coded wire harness: Designed to fit the components, all with quickconnect fittings for ease of service and replacement. Low Boy Height: Easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install. Tubular Primary Heat Exchanger: Heavy gauge aluminized steel heat exchanger and stainless steel secondary heat exchanger assures a long life. 90 Second Fixed Cooling Cycle Blower-Off Delay (TDR): Increases cooling performance when matched with a Nordyne coil. 30 second blower delay: At start-up assures a warm duct temperature at furnace startup. Adjustable blower off settings (60, 90, 120, and 180 seconds). High Static Blowers: All models equipped with high static blowers. LP Convertible: Simple burner orifice change for ease of convertibility. Diagnostic lights for easy troubleshooting without counting flashes: Dedicated light for flame signal strength and 2 lights in combination to indicate all other fault codes with easy to recognize states without counting flashes. Integrated Control Board: incorporates connections for electronic air cleaner and humidifier. Two piece door design: Enhances furnace appearance and uses captured screws to prevent losing door screws. Flexible Category I Venting System: May be vented with dedicated venting system or common vented with other category one appliances. Variable Speed Blower Kit: Upgradable to full variable speed with kit. Energy Efficient Brushless DC (ECM) Motor: Gives up to 1 SEER point efficiency gain in cooling. Model Input (Btuh) Heating Capacity AFUE Blower Motor H.P Rated Ext. Temp Rise Shipping Motor FLA (Btuh) D x W Speed - Type SP - In. W.C. Range (ºF) Wt (lbs) KG7TC KG&TL KG7TC/TL-060C-24B 60000 / 39000 57000 / 37050 95.1 10x6 1/2 - Variable 6.2 0.5 25-55 115 2142.00 2246.00 KG7TC/TL-080C-35C 80000 / 52000 76000 / 49400 95.1 11x8 1/2 - Variable 6.2 0.5 30-60 110 2206.00 2306.00 KG7TC/TL-100C-35C 100000 / 65000 95000 / 61750 95.1 11x10 3/4 - Variable 8.7 0.5 35-65 125 2268.00 2408.00 KG7TC/TL-120C-45D 120000 / 78000 114000 / 74100 95.1 11x10 3/4 - Variable 8.7 0.5 35-65 135 2594.00 2734.00 547
AIR CONDITIONING PACKAGED GP7RD-A SERIES Single Packaged Air Conditioner, Single Phase GP7RD-A 13 SEER, R-410A 2 thru 5 Ton Units Cooling: 24,000 to 56,000 Btuh Quality Compressor: State-of-the-art compressor is standard equipment. R-410A Refrigerant: Earth friendly nonozone depleting refrigerant. High Pressure Switches: Ensure long compressor life. Micro-Channel Coils: Both indoor and outdoor all aluminum coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability. ECM Blower Motor: Fixed torque energy efficient brushless DC ECM motor. Permanently Lubricated Condenser Motor: A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow. Low Voltage Transformer: Includes 3 amp fuse to protect low voltage circuit. Liquid Line Filter Driers: Factory installed at a convenient location for service. Model Cooling BTUh SEER Operating Voltage Range Refrigeration Charge R- 410A (Oz.) Dimensions (in) L W H Shipping Weight (lbs) GP7RD-024KA 23,800 13 187-253 58 49 35 22.2 244 3122.00 GP7RD-030KA 28600 13 187-253 57 49 35 22.2 249 3308.00 GP7RD-036KA 36000 13 187-253 66 49 35 30.2 280 3732.00 GP7RD-042KA 40500 13 187-253 62 49 35 30.2 297 4196.00 GP7RD-048KA 47000 13 187-253 57 49 35 30.2 301 4416.00 GP7RD-060KA 56000 13 187-253 69 49 35 34.2 317 4762.00 548
GQ7RD SERIES Single Packaged Heat Pump, Single Phase 13 SEER, R-410A, 2-5 Ton Units Cooling: 24,000-56,000 Btuh Heating: 24,000-54,500 Btuh Quality Compressor: State of the art scroll compressor is standard equipment. R-410A Refrigerant: Environmentally friendly. Designed Using Galvanized Steel: With a polyester urethane coat finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units. HEAT PUMP PACKAGED Mesh hail guard: A guard that will never rust and protects the unit s coil from being damaged. Suction Accumulator: Protection from liquid flood back and future compressor failures. Liquid Line Filter Driers: Factory installed at a convenient location for service. Low Voltage Transformer: Includes 3 Amp fuse to protect low voltage circuit. 5 Minute Restart Time Delay: When the unit shuts down, a 5 minute delay keeps the unit from restarting, eliminating the highest cause for compressor failure. Easy Compressor and Control Access: Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit. Model Number Cooling Btuh Heating BTU/h 47 ºF SEER EER Operating Voltage Range Refrigerant Charge (oz) Length Width Height GQ7RD-024K 24,000 24,000 13 11 187-253 144 49 35 30.2 3660.00 GQ7RD-030K 28,400 28,400 13 11 187-253 138 49 35 30.2 3730.00 GQ7RD-036K 34,600 34,600 13 11 187-253 144 49 35 30.2 4022.00 GQ7RD-042K 40,500 40,500 13 11 187-253 132 49 35 30.2 % GQ7RD-048K 46,000 44500 13 11 187-253 179 49 35 34.2 4654.00 GQ7RD-060K 56,000 54500 13 10.8 187-253 200 49 35 38.2 % 549
GR8GD SERIES Single Packaged Gas/Electric Units 13 SEER, R-410A, 80% AFUE 2-5 Ton Units Quality Compressor: State of the art Copeland Scroll compressor is standard equipment. Proven, Industry Standard Components: Easier service and availability. R-140A Refrigerant: Environmentally friendly. High Pressure Switch: Added compressor protection. ELECTRIC PACK Micro-Channel Coils: Both indoor and outdoor all aluminum coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability. Liquid Line Filter Driers: Factory installed at a convenient location for service. Externally Accessible Service Ports: Quick access to refrigerant system without disrupting operation. Compact Footprint/Low Profile: Easy to handle and transport. Heavy-Guage Full Perimeter Base Rails: Facilitates forklift handling and curb mounting. Convertible Air Delivery: Horizontal or downflow to accommodate rooftop or horizontal application. Model Number Heating Input High/Low Btuh Heating Output High/Low Btuh SEER EER Operating Voltage Range Refrigerant Charge (oz) Height (In.) Shipping Weight with base rails GR8GD-024K045 45000 36000 13 11 187-253 60 35 413 3772.00 GR8GD-024K072 72000 57600 13 11 187-253 60 35 421 3960.00 GR8GD-030K045 45000 36000 13 11 187-253 64 35 414 4324.00 GR8GD-030K072 72000 57600 13 11 187-253 64 35 422 4212.00 GR8GD-036K072 72000 57600 13 11 187-253 59 35 419 4620.00 GR8GD-036K096 96000 76800 13 11 187-253 59 35 427 4694.00 GR8GD-042K72 72000 57600 13 11 187-253 71 39 453 % GR8GD-042K96 96000 76800 13 11 187-253 71 39 461 5108.00 GR8GD-048K96 96000 76800 13 11 187-253 62 39 470 5360.00 GR8GD-048K120 120000 96000 13 11 187-253 62 39 478 5394.00 GR8GD-X60K096 96000 76800 13 11 187-253 64 43 489 5810.00 GR8GD-X60K120 120000 96000 13 11 187-253 64 43 497 5826.00 550
JS4BD-CB SERIES JS4BD-Rev B 13 SEER 3 Phase Light Commercial R-410A High Efficiency Air Conditioners 3, 4, 5 Ton Capacities Composite Base Pan: Absorbs sound and corrosion resistant. Composite is also stronger and lighter than steel. Easy Compressor and Control Access: AIR CONDITIONER SPLIT Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit. Removable Top Grille Assembly: Allows ease of service from the top without disconnecting fan motor leads. Permanently Lubricated Motor: A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow. Designed using galvanized steel: with a polyester urethane coat finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units. Model High Dimensions (in) Shipping Capacity SEER Operating Voltage Range EER Weight (lbs) BTUh D W H JS4BD-036CB 36000 13 187-253 11 22-3/4 22-3/4 27-1/2 115 2102.00 JS4BD-048CB 47000 13 187-253 11 30-3/4 30-3/4 31-1/2 169 2456.00 JS4BD-060CB 55000 13 187-253 11 30-3/4 30-3/4 31-1/2 171 2840.00 JS4BD-036DB 36000 13 187-253 11 22-3/4 22-3/4 27-1/2 115 2484.00 JS4BD-048DB 47000 13 187-253 11 30-3/4 30-3/4 31-1/2 169 2868.00 JS4BD-060DB 55000 13 187-253 11 30-3/4 30-3/4 31-1/2 171 3300.00 JT4BD SERIES 13 SEER 3 Phase Light Commercial R-410A High Efficiency Heat Pump 3, 4, 5 Ton Capacities Designed Using Galvanized Steel: With a polyester urethane coat finish. The 950 hour salt spray finish resists corrosion 50% better than comparable units. Copper Tube/Aluminum Fin Coils: Both indoor and outdoor coils are designed to HEAT PUMP SPLIT optimize heat transfer, minimize size and cost, and increase durability and reliability. Permanently Lubricated Condenser Motor: A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow. Full Service Valves: These brass valves are easily accessible and simplify servicing of the refrigeration system. Time/Temperature Defrost: A reliable, industry standard control offers various time settings to meet any type climate. Removable Top Grille Assembly: Allows ease of service to the fan motor. High Pressure Switch: Protects against abnormally high system pressures. Autoreset feature prevents nuisance service visits. Liquid Line Filter Driers: Factory installed at a convenient location for service. 5 Minute Restart Time Delay: When the unit shuts down, a 5 minute delay keeps the unit from restarting, eliminating the highest cause for compressor failure. Model Number Volts-Cycles- Phase (1) Total Amps Delay Fuse Max. (2) Min. Circuit Ampacity Ship Wt (lbs.) Height Width Depth JT4BD-036C 208/230-60-3 11.4 20 14.1 190 43 30-3/4 30-3/4 2920.00 JT4BD-048C 208/230-60-3 15.1 30 18.5 295 43 30-3/4 30-3/4 3740.00 JT4BD-060C 208/230-60-3 17.0 35 20.9 305 43 30-3/4 30-3/4 3822.00 JT4BD-036D 460-60-3 6.4 15 7.8 305 43 30-3/4 30-3/4 3164.00 JT4BD-048D 460-60-3 6.9 15 8.5 305 43 30-3/4 30-3/4 4152.00 JT4BD-060D 460-60-3 8.4 15 10.4 305 43 30-3/4 30-3/4 4282.00 552
S5BP SERIES Split System Air Conditioner 7 1/2 and 10 Ton rated at 11.2 EER and 11.5 IEER R-410A Refrigerant Quality Compressor: State of the art scroll compressor is standard equipment providing single stage operation. Designed using galvanized steel: with a polyester urethane coat finish. The 950 hour salt spray finish resists corrosion AIR CONDITIONER 50% better than comparable units. Copper Tube/Aluminum Fin Coils: Both indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability. Permanently Lubricated Motor: A heavy duty brushless motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow. Removable Top Grille Assembly: Allows ease of service from the top without disconnecting fan motor leads. High/Low Pressure Switches: Ensure long compressor life. Featuring auto reset. Model Cooling Operating Voltage Dimensions (in) Shipping ieer EER BTUh Range D W H Weight (lbs) S5BP-090C 92,400 11.5 187-253 11.2 37-1/2 37-1/2 44-1/4 420 5686.00 S5BP-090D 92400 11.5 414-506 11.2 37-1/2 37-1/2 44-1/4 420 5728.00 S5BP-120C 121700 11.5 187-253 11.2 37-1/2 37-1/2 52-1/4 457 6192.00 S5BP-120D 121700 11.5 414-506 11.2 37-1/2 37-1/2 52-1/4 457 6422.00 T5BP SERIES Split System Heat Pump 11.0 EER Commercial System 7½ and 10 Ton Capacity R-410A Refrigerant Quality Compressor: State of the art scroll compressor is standard equipment providing single stage operation. Auto-Reset Hi/Low Pressure Switches: Ensure long compressor life. Durable, Attractive Cabinet: Designed using galvanized steel with a polyester urethane finish. The 950 hour salt spray finish is 1.5 mil thick and resists corrosion 50% better than comparable units. Copper Tube/Aluminum Fin Coils: Outdoor coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability. Permanently Lubricated Motor: A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow. Full Service Valves: These brass valves are easily accessible and simplify servicing of the refrigeration system. Model Number Volts-Cycles-Phase (1) Operating Voltage EER Min. Circuit Ampacity Ship Wt (lbs.) Height Width Depth T5BP-090C 208-230 / 3 / 60 187-253 11 34.6 424 44-1/4 37-1/2 37-1/2 7044.00 T5BP-090D 460 / 3 / 60 414-506 11 17 424 44-1/4 37-1/2 37-1/2 % T5BP-120C 208-230 / 3 / 60 187-253 11 40.9 461 52-1/4 37-1/2 37-1/2 7794.00 T5BP-120D 460 / 3 / 60 414-506 11 22.6 461 52-1/4 37-1/2 37-1/2 % 553
HEAT PUMP SPLIT P6SP SERIES 6, 7½ and 10 Ton Packaged Electric Cooling Units Quality Compressor: State-of-the-art scroll compressor is standard equipment. R-410A Refrigerant: Environmentally friendly. 7.5 & 10 ton feature two-stage cooling. 6 ton features single stage cooling. Optional Electric Heat: Field installed 9-35kw. High and Low Pressure Switches: Added compressor protection. Copper Tube/Aluminum Fin Coils: Both indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability. Liquid Line Filter/Drier: Insures clean and dry refrigeration system. 75 VA Transformers: Includes 4 Amp circuit breaker to protect low voltage circuit. Refrigeration Model Cooling BTUh EER Charge R-410A Dimensions (in) (Oz.) L W H P6SP-072(C/D) 74,300 11.2 240 43-1/2 32-1/4 Horizontal: 43-1/2 Vertical: 38-1/4 P6SP-090(C/D)a 93500 11.2 168 501/2 28 P6SP-120(C/D)a 125000 11.2 216 44 27 Horizontal: 43-1/2 Vertical: 38-1/4 Horizontal: 55-1/4 Vertical: 50 Shipping Weight (lbs) 980 %/% 991 8306.00/% 1270 %/9980.00 554
B5SM SERIES Air Handler for Air Conditioning or Heat Pumps R-410A Refrigerant 7.5 and 10 Ton Light Commercial System Cabinet: Fabricated of heavy guage, prepainted Polyurethane coated galvanized steel. Horizontal mounting hardware is standard on all models, just add the ½ diameter threaded rod. Removable access panels are provided on both sides of the cabinet for maintenance and AIR HANDLER service. All cabinets shall have minimum ¾ supply and return flanges. Motor: Motors are 2 HP and operate at 1725 RPM (60 Hz) and are available in single or three phase models. The adjustable motor mount allows easy belt tensioning adjustment. A variable pitch motor pulley allows balancing of the system to the desired CFM. All motors are factory installed and wired and three phase motors are wired for 460V operation. Blowers: All blowers are heavy duty, double inlet, resiliently mounted, with ball bearings, forward curved blade, and of centrifugal type. The blower wheel is dynamically balanced for smooth and quiet operation. Blowers shall be belt driven with field adjustable pulleys to permit variations in static pressure and air requirements. Blower Bearings: Sealed ball bearings are utilized on both sides of the blower wheel. Model H Dimensions (in) W Nom. Cooling Capacity (BTUh) Volts/Phase/Hz. Shipping Wt (lbs) B5SM-090JA 24 18 90000 (7.5) 208-230/460-3-60 555 3972.00 B5SM-120JA 24 18 120000 (10.0) 203-230/460-3-60 580 4548.00 Q6SD SERIES 13 SEER, Three Phase, Packaged Air Conditioning With R-410A 3-5 Ton Units State-of-the-art Copeland Scroll compressor is standard equipment. R-410A Refrigerant: Environmentally friendly. Proven, Industry Standard Components: PACKAGED HEAT PUMP Easier service and availability. TXV Externally equalized. Provides precise refrigerant control under varying load conditions. High Pressure Switches: Protects against abnormally high system pressures. Liquid Line Filter/Drier: Insures clean and dry refrigeration system. Externally Accessible Service Ports: Quick access to refrigerant system without disrupting operation. Compact Footprint/Low Profile: Easy to handle and transport. Convertible Air Delivery: Horizontal or downflow to accommodate rooftop or horizontal application. Model Cooling Operating Voltage Refrigeration Charge R- Dimensions (in) Shipping SEER BTUh Range 410A (Oz.) Weight (lbs) L W H Q6SD-X36C 34,200 13.3 187-253 110 27.5 26.5 39 415 4622.00 Q6SD-X48C 46000 13 187-253 168 28.0 26 39.0 425 5552.00 Q6SD-X60C 58000 13.3 187-253 192 29.5 26.5 43.0 490 5696.00 555
GAS/ELECTRIC PACK R6GF SERIES 13 SEER, Three Phase, Packaged Gas/ Electric Units with R-410A 3-5 Ton Units Compact Footprint/Low Profile: Easy to handle and transport. Quiet Operation and Low Vibration: 20 fan blade combined with custom condenser fan orifice. R-410A Refrigerant: Earth friendly non-ozone depleting refrigerant. Plastic Mesh Hail Guard: A guard that will never rust and protects the units coil from being damaged by balls, lawnmowers, hail, etc. Access to Controls and Major Components: Easy in and out service. Designed using Galvanized Steel: with a polyester urethane coat finish. The 950 hour salt spray finish is 1.5 mil thick and resists corrosion 50% better than comparable units. Model Number Heating Input Heating Output Operating Voltage Refrigerant Height (In.) SEER EER High/Low Btuh High/Low Btuh Range Charge (oz) with base rails Length R6GD-X36C072C 72000 56000 13.5 11.8 187-253 112 39 25.5 4376.00 R6GD-X36C096C 96000 75000 13.5 11.8 187-253 112 39 25 4392.00 R6GD-X48C096C 96000 75000 13 11.0 187-253 224 43 26 5124.00 R6GD-X48C120C 120000 94000 13 11.0 187-253 224 43 25.5 5186.00 R6GD-X60C096C 96000 75000 13 11.0 187-253 184 43 26 5548.00 R6GD-X60C120C 120000 94000 13 11 187-253 184 43 25.5 5590.00 E3EB SERIES E3EB-xxx-H Series Downflow, Upflow Electric Furnaces The E3 Series furnace is designed for all sizes of manufactured and modular homes. These units incorporate reliability and low maintenance. Units may be installed free standing in a utility room or enclosed in an alcove or closet. E3 Series furnaces are A/C ready, with multiple blower combinations for cooling requirements. Choice of Air Conditioning Options: From 2-5 tons A/C ready. Easy Open Door: Secures the door firmly for transit, yet allows easy removal for access. ELECTRIC FURNACE Effective Air Filter: Universal disposable filter is readily available and simple to replace. Nichrome Heating Elements: Provide long lasting, efficient heating. Appliance Quality Door: Protects against rust and other corrosion. Baked enamel finish allows for easy cleaning. Fully Insulated Cabinet: Insures minimized heat loss and quiet operation. Safety and Dependability: Auto reset controls protect unit s electrical circuitry and helps ensure trouble free performance. Built in circuit breakers for extra safety. Adaptable: Unit can be adapted to provide dependable heating in either downflow or upflow mode. Versatile: Works with self-contained or split system air conditioners or heat pumps. Model Min. Circuit Ampacity Heating Output (Btuh) Supply Voltage Blower D x W Motor Speed, H.P. Rating, Amps Watts (total kw) Rated Ext. SP - In. W.C. E3EB-010H 56 35000 240 Volts/60Hz/1-Phase 10.5x8 4 Speed, 1/3 HP, 2.9 10.4 0.3 776.00 E3EB-012H 64 41000 240 Volts/60Hz/1-Phase 10.5x8 4 Speed, 1/3 HP, 2.9 12.0 0.3 % E3EB-015H 82 53000 240 Volts/60Hz/1-Phase 10.5x8 4 Speed, 1/3 HP, 2.9 15.4 0.3 862.00 E3EB-017H 88 57000 240 Volts/60Hz/1-Phase 10.5x8 4 Speed, 1/3 HP, 2.9 16.6 0.3 E3EB-020H 108 70000 240 Volts/60Hz/1-Phase 10.5x8 4 Speed, 1/3 HP, 2.9 20.4 0.3 % % E3EB-023H 117 75000 240 Volts/60Hz/1-Phase 10.5x8 4 Speed, 1/3 HP, 2.9 22.0 0.3 1086.00 E3EB-023H 5-Ton 117 75000 240 Volts/60Hz/1-Phase 11x8 4 Speed, 3/4HP, 3.8 22.0 0.3 % 556
OIL FURNACES CMF2 SERIES Oil and Gas Furnace Three speed custom fit and painted blower for efficient, quiet operation. Multi-firing technology in gas and oil burner. Resized auxiliary limit switch eliminates nuisance cycling. Beckett oil burners are standard equipment. Classic 18 width dimension for tight replacement jobs. MA 100, MA 200, and CB 200 bases for versatility in applications. Drum/Tubular heat exchanger assures long life. Model Number Factory Set Firing Rate (btu/hr) Heating Capacity BTU/HR AFUE Motor H.P. -Speed - Type Burner Nozzle for Oil Nom. Anticipator Setting CMF 80 PG Convertible 75,000 56,000 75+ 1-4 - 3 - PSC N/A 0.6 2446.00 CMF 80 PO Convertible 75,000 60,000 80+ 1-4 - 3 - PSC 0.60 gph; 80ºA 0.6 2528.00 M5 SERIES FURNACES M5 Series Furnaces M5S* Oil Gun Sealed Combustion System: Vents exhaust gas directly outdoors and draws in 100% outside air for the burner. Easy Open Pawl Latch: Secures the door firmly for transit, yet allows easy removal for access. Choice of Air Conditioning Options: From 2-5 tons A/C ready. Large, Effective Air Filter: Room air is cleaner with this permanent washable filter. High Efficiency Drum Heat Exchanger: Delivers optimum heat transfer with low air resistance. Appliance Quality Door: Protects against rust and other corrosion. Baked enamel finish allows for easy cleaning. Fully Insulated Cabinet: Insures minimized heat loss and quiet operation. Reliable Burner: With uniform flame pattern extends life of heat exchanger. Model Number Input (Mbtu/hr) Heating Capacity MBTU/HR AFUE Motor H.P. E.S.P. in W.C. Motor FLA Blower DxW Temp. Rise Range Ship Wt. (Lbs.) M5SB-066 66 56 83 1/4 0.3 6 45-75 151/165 2478.00 M5SC-066 66 56 83 1/2 0.3 7.9 45-75 152/167 % M5SB-086 86 73 83 1/4 0.3 6 45-75 158/173 2550.00 M5SC-086 86 73 83 1/2 0.3 7.9 45-75 159/174 % 557
GAS FURNACES M1 SERIES FURNACES M1M* Hot Surface Ignition M1B* Gas Gun Sealed Combustion System: Vents exhaust gas directly outdoors and draws in 100% outside air for the burner. Easy Open Pawl Latch: Secures the door firmly for transit, yet allows easy removal for access. Choice of Air Conditioning Options: from 2-5 tons A/C ready. Large, Effective Air Filter: Room air is cleaner with this permanent washable filter. High Efficiency Drum Heat Exchanger: Delivers optimum heat transfer with low air resistance. Appliance Quality Door: Protects against rust and other corrosion. Baked enamel finish allows for easy cleaning. Fully Insulated Cabinet: Insures minimized heat loss and quiet operation. Reliable Burner: With uniform flame pattern extends life of heat exchanger. Model Number Input MBtu/h Output MBtu/h AFUE E.S.P. In WC Motor Hp Motor FLA Ship Wt. (Lbs.) M1MB-056 56 46 80 0.3 1/4 6 152/167 1604.00 M1MC-056 56 46 80 0.3 1/2 7.9 156/171 % M1MB-070 70 57 80 0.3 1/4 6 153/168 1660.00 M1MC-070 70 57 80 0.3 1/2 7.9 157/172 % M1MB-077 77 62 80 0.3 1/4 6 149/164 1724.00 M1MC-077 77 62 80 0.3 1/2 7.9 156/171 % M1MB-090 90 72 80 0.3 1/4 6 151/166 1808.00 M1MC-090 90 72 80 0.3 1/2 7.9 156/171 % M1BB-066 66 53 80 0.3 1/4 6 n/a/185 % M1BC-066 66 53 80 0.3 1/2 7.9 172/187 % M1BB-086 86 68 80 0.3 1/4 6 178/193 2900.00 M1BC-086 86 68 80 0.3 1/2 7.9 179/194 % 558
SV iseries E S The iseries Greensource water source heat pump comes equipped with the quality and innovative technology that only Bosch can provide. Standard Features High and low pressure switches Electronic circuit cuit board with alert display also be displayed via the thermostat 75 VA transformer G90 galvanized anized steel cabinet 1/2 rglass insulation Condensate ov ow switch Water coil freeze protection Evaporator coil freeze protection Brown out low voltage protection Standard d 1 glas t ter rack which can Factory Installed Op TXV (Thermal Expansion Valve) Closed-cell foam insulation (coming soon) ters wit ter rack Energy management switch relay Hot gas reheat DDC contr factory installed) Field Installed Accessor Smart Start (coming soon) Warranty anty 1 year parts limited warranty 5 year compressor limited warranty Subject to change without prior notice.
Model Nomenclature SV 036 1 VT C F L T P U A MODEL: SV NOMINAL CAPACITY: ACITY: 007, 009, 012, 015, 018, 024, 030, 036, 041, 042, 048, 060, 070 VOLTAGE DESIGNATION: 1-208/60/1 & 230/60/1 2-265/60/1 3-208/60/3 & 230/60/3 4-460/60/3 CABINET CONFIGURATION: ON: VT - Vertical HZ - Horizontal CF - Count ow COAX OPTIONS : C - Copper N - Cupro-Nickel REVISION LEVEL: A - Current EVAPORATOR COIL OPTIONS: U - Copper/Aluminum Fin D - Tin-plated Coil FAN/MOTOR OR OPTIONS: P - Standard d PSC A - Const ow ECM T - Constant Torque ECM DISCHARGE AIR CONFIGURATION: T - Top S - Straight E - End B - Bottom RETURN AIR CONFIGURATION: L - Left R - Right WATER CONNECTIONS : F - Front Greensource iseries SV Model 007 070 13 Models from 1/2 through 6 tons Vertical, Horizontal and Count ow rations The SV Model is a cost-effective single stage water source heat pump designed for commercial retrofit and new construction applications. Standard Optional Know your Series CDi Complete Design with Innovation Si Select Innovation i Innovation Standard Features Cabinet The SV unit cabinetry is constructed using heavy-gauge, G90 galvanized steel. This steel provides superior corrosion protection for units located indoors. Allinterior surfaces arelined with1/2 thick,1.5 lb./cu.ft. densi ensity, Micromatinsulation for thermal insulation andacoustical attenuation. This insulation is non-combustible,non-hydroscopic and does notsupportfungalgrowt h. Insulation meets NFPA90A and 90B for reprotection and is cert dtomeetthe GREENGUARD Indoor Air QualityStandardfo or LowEmitting Products. Subject to change without prior notice. Quiet Operation All panels are insulated with 1/2 thick, 1.5 lb./cu.ft. density Micromat berglass insulation as standard for both thermal insulation and noise reduction. Noise reduction is a critical consideration of the unit design. All SV units have a unique base compressor that is mounted on a heavy steel plate which rests on a high density rubber pad on the base of the unit. In addition, compressors are mounted on rubber grommets. This double isolation, which is unique to Bosch, is standard in all SV units and helps prevents vibration and noise transmission from the compressor to the unit structure resulting in exceptionally quiet operation. For additional sound attenuation, factory installed closed cell foam insulation provides whisper-quiet operation and improved IAQ. A installed optional compressor blanket is also availableailable on unit sizes 024 and above.
T in Plated Coa ted Fin Evaporator Coil Unit Dimensions Vertical Top Discharge Water Source Heat Pump Model Horizontal Water Source Heat Pump Model Count ow Water Source Heat Pump Model Unit Overall Dimensions Height SV007 24.25 SV009 24.25 SV012 24.25 SV015 32.25 SV018 SV024 SV030 SV036 SV041 SV042 SV048 SV060 SV070 32.25 39.25 39.25 43.25 39.25 43.25 45.25 45.25 58.25 Unit Overall Dimensions Height SV007 11.5 SV009 11.5 SV012 11.5 SV015 17.0 SV018 17.0 SV024 17.0 SV030 17.0 SV036 19.0 SV042 19.0 SV048 21.0 SV060 21.0 SV070 21.0 SV015 SV018 SV024 SV030 SV036 SV042 SV048 SV060 SV070 Unit Overall Dimensions Height 32.25 32.25 39.25 39.25 43.25 43.25 45.25 45.25 58.25 Width Width Width Depth 19.0 19.0 19.0 19.0 19.0 19.0 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 26.0 21.5 21.5 21.5 26.0 24.0 32.5 24.0 32.5 26.0 33.25 Depth 19.0 33.0 19.0 33.0 19.0 33.0 22.0 43.0 22.0 43.0 22.0 43.0 22.0 43.0 22.0 54.5 22.0 54.5 25.0 54.5 25.0 54.5 25.0 65.0 Depth 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 26.0 21.5 26.0 24.0 32.5 24.0 32.5 26.0 33.25 TXV Valve (Optional) Supply Air Duct Connection Discharge Width 8.0 8.0 8.0 8.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 15.5 Supply Air Duct Connection Discharge Width 5.8 5.8 5.8 6.0 8.6 8.6 8.6 8.6 8.6 10.0 10.0 11.3 Supply Air Duct Connection Discharge Width 6.4 9.0 9.0 9.0 9.2 10.5 10.5 11.7 11.7 Discharge Height 10.0 10.0 10.0 10.0 14.0 14.0 14.0 15.5 15.5 15.5 18.0 18.0 18.0 Discharge Height 3.6 3.6 3.6 9.15 9.15 9.15 9.15 9.8 9.8 10.86 10.86 12.0 Discharge Height 4.1 9.7 9.7 9.7 10.3 11.3 11.4 12.5 12.5 Return Air Duct Connection R/A Duct Flange Height Return Air Duct Connection R/A Duct Flange Height Return Air Duct Connection R/A Duct Flange Height Bl ower Housing (with Removable Inlet Ring) R/A Duct Width 8.0 16.0 8.0 16.0 8.0 16.0 14.0 20.0 R/A Duct Width R/A Duct Width Overall unit dimensions do no ter rac Condenser Water Connections Condenser Water Connections Condenser Water Connections Recommended Replacement Nominal Filter Size Recommended Replacement Nominal Filter Size Recommended Replacement Nominal Filter Size NOTES: All dimensions within + 0.125. All condensate drain connections are 3/4 FPT. Horizontal models can be eld converted betwe een end blow and straight through supply air con gurations. Speci cations subject to change without notice. 1 ter rack extends 1.23 beyond the side of the unit. 2 ter rack extends 2.89 beyond the side of the unit. The 2 lter rack is 4 sided with ter access door on each end and can accept either a 1 or 2 ter. 14.0 18.0 18.0 22.0 18.0 22.0 22.0 22.0 30.0 20.0 20.0 20.0 24.0 20.0 24.0 30.0 30.0 30.0 16.15 8.6 16.15 8.6 16.15 8.6 20.15 15.0 20.15 15.0 25.15 15.0 25.15 15.0 30.0 17.0 30.0 17.0 34.6 19.0 34.6 19.0 48.1 19.0 14.0 14.0 18.0 18.0 22.0 22.0 22.0 22.0 30.0 20.0 20.0 20.0 20.0 24.0 24.0 30.0 30.0 30.0 UPM Control Board 3/4" FPT 10 16 1 CALL FOR PRICING 3/4" FPT 10 16 1 CALL FOR PRICING 3/4" FPT 10 16 1 CALL FO OR PRICING 3/4" FPT 16 20 1 CALL FOR PRICING 3/4" FPT 16 20 1 CALL FO OR PRICING 3/4" FPT 20 20 1 CALL FOR PRICING 3/4" FPT 20 20 1 CALL FO OR PRICING 3/4" FPT 24 24 1 CALL FO OR PRICING 3/4" FPT 20 20 1 CALL FOR PRICING 3/4" FPT 24 24 1 CALL FOR PRICING 1" FPT 24 30 1 CALL FOR PRICING 1" FPT 24 30 1 CALL FOR PRICING 1" FPT 16 30 1 (2) CALL FOR PRICING 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT 1" FPT 1" FPT 1" FPT 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT 3/4" FPT 1" FPT 1" FPT 1" FPT 10 16 1 CALL FOR PRICING 10 16 1 CALL FOR PRICING 10 16 1 CALL FOR PRICING 16 20 1 CALL FOR PRICING 16 20 1 CALL FOR PRICING 16 25 1 CALL FOR PRICING 16 25 1 CALL FOR PRICING 18 30 1 CALL FO OR PRICING 18 30 1 CALL FOR PRICING 20 34.5 5 1 CALL FOR PRICING 20 34.5 5 1 CALL FOR PRICING 20 24 1 (2)) CALL FOR PRICING 16 20 1 CALL FOR PRICING 16 20 1 CALL FOR PRICING 20 20 1 CALL FOR PRICING 20 20 1 CALL FOR PRICING 24 24 1 CALL FOR PRICING 24 24 1 CALL FOR PRICING 24 30 1 CALL FOR PRICING 24 30 1 CALL FOR PRICING 16 30 1 (2) CALL FOR PRICING Subject to change without prior notice.
OIL FURNACES PATRIOT80 OIL FURNACES Highboy The compact Patriot 80 comes in a variety of configurations to fit virtually anywhere, including utility rooms, alcoves, closets, crawl spaces and attics. In addition to upflow, downflow/horizontal, rear flue and front flue versions, models are available in heat only or A/C ready combinations. In selecting a furnace, oversizing is not recommended the closer the heating output is matched to the heat loss of the residence, the more comfortable the homeowner will be while saving on fuel usage. With the Patriot 80, the model can be easily Model Number OUFB95-D4 OUFB75-D3 BTUH Input 101,000 113,500 67,500 85,500 PATRIOT80 OIL FURNACES DOWNFLOW/HORIZONTAL The compact Patriot 80 comes in a variety of configurations to fit virtually anywhere, including utility rooms, alcoves, closets, crawl spaces and attics. In addition to upflow, downflow/horizontal, rear flue and front flue versions, models are available in heat only or A/C ready combinations. In selecting a furnace, oversizing is not recommended the closer the heating output is matched to the heat loss of the residence, the more comfortable the homeowner will be while saving on fuel usage. With the Patriot matched to the desired heating requirements: units are built with multiple firing rates and a simple nozzle change adjusts the firing rate to the heating requirement. Foil-faced high density fiberglass insulation to minimize noise and heat loss. Heavy duty 14 guage steel heat exchanger engineered for efficiency; covered by limited lifetime warranty. Available in upflow, downflow, horizontal, front or rear flue configurations. Corrosion resistant steel BTUH Output 84,000 95,000 57,000 72,000 AFUE Nom. Cap. Cooling cabinet construction with baked enamel finish for durability. Easy access stainless steel clean-out ports for complete servicing of heat exchanger. State-of-the-art Beckett AFG burner with flame retention head, PSC burner motor and solid state ignition for smooth igniting. High temperature ceramic combustion chamber for quiet, high efficiency combustion Multi-speed direct drive blower assembly with slideout design and handy plug-in wiring (adjustable belt drive on OLRA200-BH). FLUE Volts/Hz/P Dia. (in.) hase Width Depth Height Primary with integral fan center. Honeywell fan/limit for simple operation. Ship Wt. (Lbs.) 83 83 2.5-4.0 6 120/60/1 19-1/2 30-5/8 54 250 % 84 84 80, the model can be easily matched to the desired heating requirements: units are built with multiple firing rates and a simple nozzle change adjusts the firing rate to the heating requirement. Foil-faced high density fiberglass insulation to minimize noise and heat loss. Heavy duty 14 guage steel heat exchanger engineered for efficiency; covered by limited lifetime warranty. Available in upflow, downflow, horizontal, front or rear flue configurations. 2.0-3.0 6 120/60/1 19-1/2 30-5/8 54 230 2796.00 Corrosion resistant steel cabinet construction with baked enamel finish for durability. Easy access stainless steel clean-out ports for complete servicing of heat exchanger. State-of-the-art Beckett AFG burner with flame retention head, PSC burner motor and solid state ignition for smooth igniting. High temperature ceramic combustion chamber for quiet, high efficiency combustion Multi-speed direct drive blower assembly with slideout design and handy plug-in wiring (adjustable belt drive on OLRA200-BH). Primary with integral fan center. Honeywell fan/limit for simple operation. Model Number ODFB95-D3 BTUH Input 101,000 113,500 BTUH Output 85,000 95,000 AFUE Nom. Cap. Cooling FLUE Dia. Volts/Hz/P (in.) hase Width Depth Height Ship Wt. (Lbs.) 83 2.0-3.0 6 120/60/1 20-1/2 59 18 250 3092.00 562
CONDENSER PAD Lightweight - 80% lighter than precast concrete. Solid wall construction won't chip or crack. Install it and forget it! Chemical resistant. One person can install a pad in less than two minutes. It's UV stable - impervious to sunlight. Size (In.) Thickness Part No. W L (In.) ACPB18362 18 36 2 56.00 ACPB24242 24 24 2 51.00 ACPB24362 24 36 2 67.00 ACPB30402 30 40 2 81.00 ACPB33332 33 33 2 77.00 ACPB36362 36 36 2 88.00 ACPB50503 50 50 3 245.00 DRAIN PAN SECONDARY Rolled edges for durability Ribbed bottoms for rigidity Reinforced corners for strength 3/4" PVC fittings attached to each pan No seams no rust no leakage Depth 2"; Overall dimension + 2" "S" suffix = Drain line outlets in short side "L" suffix = Drain line outlets in long side Dimensions (In.) Part No. W L /Ea. AGT3050 30 50 80.00 AGT3062 30 62 90.00 AGG3050 30 50 140.00 AGG3060 30 62 110.00 UNIT ELEVATOR Elevates heat pumps and air handling units Made of corrosion-resistant plastic Allows better condensate drainage Helps prevent corrosion of metal base Absorbs vibration and noise Polymeric mastic included with each unit Solid 6" x 6" mounting base Top diameter: 4 1/8" Part No. Description /Ea. B4005BLK 3" Pump-up 6.00 B4007BLK 6 Screw-up 8.50 B4008BLK 6" Pump-up 6.36 B4007 6 Screw-up 8.00 FURNACE MOUNTING BLOCK Easy peel and stick installation Each block can support 300 lbs. Holds furnace off floor to prevent moisture and rust of furnace panels Absorbs vibration and noise Part No. Description Bulk Qty. /Ea. FMB1 Mounting Block 72 3.00 CLOG DETECTION SAFE-T-SWITCH The Safe-T-Switch Models SS1 and SS2 detect down stream clogs in condensate drains and interrupt the thermostat circuit to shut off the unit SS1 before flooding occurs. This product can also be installed to activate an alarm circuit. The Model SS1 installs inline at any downward slope from vertical to horizontal. It can also be installed on auxiliary pan outlets utilizing the plug included with the kit. Model SS2 installs primarily in drain pan outlets but can be used inline with the addition of a 3/4" tee. Float resets automatically and won't stick in the 'OFF' position after the drain is cleared, saving callbacks. UL Listed to comply with most applicable building codes Package includes 4', 18 gauge lead wires SS1 also includes 3/4" Schedule 40 PVC slip plug and bushing Part No. Description SS1 SS1, Inline "T" 40.00 SS2 SS2, Terminal 90 38.00 SS3 SS3, Metal Clip 20.00 SG-1 Overflow Alarm 43.00 563
Titan T a Flexible e b e Series es Secondary y Drain a Pans a s Data Sheets: (MSDS, PDS, etc ) Used when space requirements i rements rements are tight, i t, the e Titan Flexible Series i es Secondary Drain Pans are more exible i b l e and d durable l e than than fabricated metal m or plastic pans. pans. Created ted from our patented d blend blend of advanced ance d polymer l DexEllar eexx x xxeell l la aar material, i al, Titan Flexible l e Series i es s Secondary y Drain Pans will not t rust, crack,, split p or leak e k like like a traditional i l fabricated d metal tal secondary y drain d pan. DexEllar eexx x xxeell l la aar material i al is s UL 94-5VA A ame e retardant ant t and d ASTM TM E-84 Class l a C rated rated for ame spread p and d smoke e developed ed for interior i r wall l and d ceiling iling nishes n i h a superior i level e l of safety f fety t and protection tit on compared to traditional i al HVAC/R R secondary drain pan pan materials and provides s extreme e temperature ture durability y -20 F (-28 C) to 260 F (126.7 C), high h h tensile strength h and is self self extinguishing. g.
C M S Because of DexEllar s ee x xx EEl l ala aa r s s ss low l o w ame e spread e d andd smoke e developed d o ed ratings, i, Titan T t a Flexible l e Series S i es Secondary Drain Pans P (24 x 24, 2, 26 x 26, 2, 30 x 30, 3 0, and 32 x 32 3 2 sizes) i ) can be usedd in n plenum l required i red air-handling i - l ingi spaces. Traditional i i l ABS Plastic l ic secondary drain i pans cannot be used in i n plenum air-handling ng g spaces. s. Clliick CC l i cc kk here hh ee ree e ttt to o oo llearn l ee a aa rnn nn more moor rere ee aboutt aa bb oo uuttt t DexEllar s D ee xx EEl l la aa r s ss Pan PPaann a Matteriiall Maattt te ee i ia a al aal l Specii SS pp ee cci i cattiions cc aattt itit i io oo nn ss Avaiillablle AAv v vv aaiillaabblleeiinn i l la a ab aa bb l le ee iin in nn siix ssiixx i ix xx siizes ss i iz zz e ee s ss ((W)) (W( ) x xx ((L)):: ( L(L LL)) ): :)) : 96230 99 66 233 22 3 0 00 AG--T AAAG - Ṯ-T TT 24 22 44 xx 24 22 44 ((Pllenum (P PPlleennuum l eennuum Ratted)) RR a aattt t te et ee dd)) ) w t o Titan Flexible Series i es Secondary Drain Pans are e speci cally cally y designed e ed and engineered e ne d to be completely e l ly compatible a withi h our Golliiatth G ool l li i ia aattt th hh Furnace FF uu r nn aa cc ee Seriies SS ee r es ee ss Furnace FF uu r nn aa cc ee Riisers RR i is ss ee r s ss (shown h to the right) g ) to create a complete e and professional HVAC installation. tion.. Made a aadd d ee wiitth i thh h hh Priide PPr i dd ee iin i nn tthe tht t h hh e ee USA, SS AA, Titan n Flexible Flexible Series s Secondary Drain ra Pans are manufactured with with rolled l edges es and d no seams s for superior superior p one-piece p e structural t r strength e g h and exibility. ilit y. 9 A 3 x 5 (( * Titan Titan Flexible Series i es Secondary Drain Pans is s compatible with i h our u r AG--4200 AA -4 44 2 22 0 0 Condensatte CC oo nn dd ee n ns nn ss a aa ttt t tet e ee Managementt aa nn a ag aa gg ee e en ee n nt nn t ttt Systtem SS y yy s ss ttt tet ee m water r sensor sensor and d drain n adapter. apter 96232 99 66 22 33 22 AG--T AAG - Ṯ-T TT 26 22 66 xx 26 22 66 ((Pllenum (P PPlleennuum l eennuum Ratted)) RR a aattt t te et ee dd)) ) 96234 99 66 233 22 3 4 44 AG--T AAAG - Ṯ-T TT 3 30 33 00 xx 3 30 33 00 ((Pllenum (P PPlleennuum l eennuum Ratted)) RR a aattt t te et ee dd)) ) 9 A 3 x 6 (( * 96236 99 66 233 22 3 66 AG--T AAAG Ṯ-T TT 3 32 33 22 xx 3 32 33 22 ((Pllenum (P PPlleennuum l eennuum Ratted)) RR a aattt tet ee dd)) ) Titan Flexible Series Secondary Drain Pans - RectorSeal http://www.rectorseal.com/index.php/titan-flexible-series-secon * When Properly rly Con gured with i h Approved ve Steel l Supports and Pressure Treatedted 4 x 4 s Key KK e ee yy Feattures FF ee aattt tu u uu rerer r e es ee ss & Bene tt BB ee nn e ee ttt tts tsts s:: ss: : 1. Saves Time i e Saves Money y Quick-and-Easy n - Professional fessional Installation tionn Stronger r and More Flexible than n a Metal l Pan and Will Not Rust Flexible e Enough to Foldl d into Tight Installations l ations i While W e Still S Maintaining ainingi n Rigidity i i y 2. Extreme e Temperature erat e Durability y -20 F (-28 C) to 260 F (126.7 C) (126.7 C) UL 94-5VA V A and d ASTM T E-84 E Class a C Rated Selfl f Extinguishing i i i Safer and More Reliable le Material l of Choice i e 3. High Load Bearing ing and Tensile Strength h Designed i d and Engineered i neered ed to be Completely l etel el Compatible p l e with ith Our Golliiatth G ool l lii ia atttt aa t hth hh FF Furnace uu r nn aa cc ee RR Riisers i is ss ee rsss s Manufactured withi h Rolled d Edges dges and No Seams for Superior One-Piece-Pieiece Structural Strength g h and Flexibility y Tensilei le Yield Y i l Strength of 8,900, lbs. l Per Square Inch I 4. High Impact Resistanceistatance Over 200x 0x Stronger than Glass and 30x Stronger than Acrylic ToughTo as a s Steel l resistancei stance to crackingr ra i and/or/ breaking i g Ideal l for r Applications where HVAC/R Products may m Experienceience Extremex xt treme Punishment t 5. Completel Condensate Management agement System AquaGuard AA q qq uu aa G u uua a aa r dd AG--4200 AA G ----4 44 22 0 Seriies SS ee r i ie es ee ss Condensatte CC oo nn dd ee n ns nn ss a aattt te e ee Over ow O v vv ee r oow w Swiittch SS w iittt ttctc tcchh cc hh and aanndd Draiin rarar r aaiinn nn Adaptter AAddaapp dd aa ppttt tete ee r ** * ** 96238 99 66 233 22 8 88 AG--T AAAG Ṯ-T TT 3 30 33 00 xx 50 55 00 ((Hangablle (H H aa nn gg a ab aa bbl l ee *)) ** ) 96240 99 66 244 22 440 400 0 AG--T AAAG Ṯ-T TT 3 30 33 00 xx 62 66 22 ((Hangablle (H H aa nn gg a ab aa bbl l ee *)) ** ) ** See Distributor ibutor for Details All l Titan i a Flexible l e Series S Secondary S y Drain n Pans meet m t or exceed eed all l international nationali n building l ing codes e andd come withi h a 33 Year YY ee aa r Liimiitted LLii i mim miittt iit tteedd tete Warrantty.. aa r rarar r a an aa nnttt tttyty t ytyty yy. Patent: t: 7,878,019 7,01 9
Goliath G Series e es Secondary y Drain Pans a s TRUE TT RR U EE TT TO O THEIIR TT H EEII RR NAME:: AA M EE:: : Goliath h Series i es Secondary Drain Pans are ttt th he hh ee sttrongestt,, ssttt tttt tr r oo nn gg ee stt,, ssttt stttt ttt,, t,t,, mostt oo ssttt stttt t rugged uu g ge ggeedd ee dd HVAC VV AA CC secondary ss ee cc oo n nn dd aa r yy draiin dd rarar r aaii nin nn pans pp aa nn ss on oo n nn ttt tthe tthh th ee markett aa r kk eettt t tto toto oday.. oo dd aa yy. Video: Drain i Pans Goliath Pans Pans vs Competitors Data Sheets: (MSDS, PDS, etc ) Manufacturers rs Pan n Compatibility Chart Chart Made M a aa d dd ee Wiitth W i ttt t thh ht hh Priide PPr i dd ee iin i nn ttt tthe tthth tht h hh e ee USA U SS AA from r om our own patented ted blend l of advanced polymerl ymer DexEllar ee x xxeell l la aar material, i al,, Goliath Series i es Secondary Drain Pans are are engineered eer ered ered ed with i superior i one-piece i ece ece structural r strength th to produce e a nearly y indestructible e ible drain pan n with i h rolled r d edges dges and and no seams. s. Goliath i h Series Secondary y Drain r n Pans provide extreme eme eme e temperature p e durability y -20 F (-28 C) to 260 F (126.7 C), (126.7 C), high g h tensilen strength, e g, crack/split/leak/rust ck/split/leak/ru /l k/ru st resistance, and are self self extinguishing. ishin ing. DexEllar ee x xxeell l la aar material i al is s UL 94-5VA - A ame retardant ant and ASTM E-84 Class l s C rated for r ame spread and smoke developed l for interior ior wall a and ceiling i nishes i a superior ri level e l of safety y and protection ion compared to traditional adit i l HVAC/R secondary y drain in pan materials. l. Clliick CC l i cckk kk here hh ee ree e ttt tooll o llearn l eeaa aa rnn nn more moor oo rere ee aboutt aa bb oo uuttt t DexEllar s ee xxeell l aar s ss Pan PPaann aa nn Matteriiall Maattt aa te ee r i ia a al aal l Specii cattiions SS pp ee cci i i ca cc aattt ititi i io oonn nn ss Each h pan a is strong g enough ugh to hang g using ing only y one pair r of steel e l support uppor struts, ensuring g a quick- - and-easy - professional i o onal installation. l ation. i n. They y also o feature e a network k of built-in l n risers, i which h are e compatible with i h a wide variety y of sizes s of HVAC AC units and eliminate inate the the need to shop shop around for additional i tional risers i s or r mounting g blocks. l. Some Some Goliath h pans have lower ower risers i s when h space e is s restricted. icted. Risers i run u n the length ength of pan for better strength h when hanging. ing. Each pan has specially i y
designed ed indentations ntat tions for placement p a of hanging g g brackets. Goliath i h Series S Secondary S y Drain r n Pans is i s compatible c e with h our AG--4200 AA -4 44 2 22 0 0 Condensatte CC oo nn dd ee n ns nn ss a aattt t tet e ee Managementt M aa n nn a ag aa gg ee m e en ee n nt nnttt t Systtem SS yy ssttt te ee m water sensor sor andd drain n adapter. apter. Avaiillablle AA v vv a aaiillaabblleeiinn i l la a aa ab bb l le ee iin i in nn siix ssiixx i ix xx siizes ss i iz zz ee s ss ((W)) (W( ( W ) x xx ((L)) ( L(L LL)) ) x xx ((H)):: (H ): :)) : 96200 99 66 22 0 AG--G AA ----G G 26 22 66 x xx 56 x 55 66 x x xx 2..75 22. 7.7 77 55 Low LL oo w Pro lle PP r oo l l le ee 96210 99 66 22 11 00 AG--G AAG G --- -G G 3 30 33 00 x xx 6 6 66 x xx 4..00 44..0 0 96202 99 66 22 200 22 AG--G AAG G --- -G G 28 22 88 x xx 57 55 7 77 x xx 5..25 55..2 22 5 5 55 96204 99 66 22 200 044 4 AG--G AAG G ----G G 28 22 88 x xx 69 66 99 x xx 4..25 44..2 22 55 96206 99 66 22 200 66 AG--G AAG G ----G G 3 30 33 00 x xx 50 55 00 x xx 4..00 44..0 0 0 00 Key KK ee yy Feattures FF ee aattt tutu uu rerer r e es ee ss & Bene tt BB ee nn e ee ttt tsts s:: ss: : 1. Saves SS aa vv ee ss Tiime TTii m ee Saves SSa aa vv ee ss Money oo nn ee y yy Quick-and-Easy n - Professional fessional Installation tionn Strong Enough g to Hang Using Only One Pair of Steel Support t Strutst No Pressure sure Treated ted Lumber ber to Cut t or Buy y 2. Exttreme EE xxttt trtr rere ee m e ee Temperatture TT ee pp e er ee rarar raa aattt attt tu u uu rerer r e ee Durabiilliitty uu raraa aa bbiilliittt tyty t yy -20 F (-28 C) to 260 F (126.7 C) (126.7 C) UL 94-5VA V A and d ASTM E-84 E Class a C rated r Selfl f Extinguishing i i i Safer and More Reliable le Material e l of Choice i e 3. Hiigh Hiigghh i ig gg hh Load LLooaadd oo aa dd Beariing BB ee a aa rri i nn gg and aanndd dd Tensiille TT ee nn ssi i ill l le e ee Sttrengtth SS ttt t trrere r rerer e ee nn gg ttt t hth hh Tensile ile Yield i l Strength of 8,900, lbs. Per Square Inch Network k off Built-Ini lt-t n Risers No Need to Shop Around for Additional i l Risersi or Mounting ingg Blocksk 4. Hiigh i ig gghh hh IImpactt I mim m pp aa cc ttt t Resiisttance RR e ee ssi i is st ss ttt t tat a aa nn cc e ee Over 200x 0x Stronger than Glass lass and 30x Stronger than Acrylic ToughTo as a s Steel l resistancei stance to crackingr ra i and/or/ breaking i g Ideal l for r Applications where HVAC/R Products may m Experienceience Extremex xt treme Punishment t 5. Compllette CC oo ppl l ee ttt tete e ee Condensatte CC oo nn dd ee n ns nn ss aattt te e ee Managementt aa nn a ag aa gg ee m e en ee n nt nnttt t Systtem SS y yy ss ttt te ee m AquaGuard ard AG-4200 4 Series Condensate e Over ow O w Switch h and d Drain n Adapter * (sold ( l d separately) ate Available l abl l e AG--GFR AA G ----G G FF RR Viibrattiion VV i bb rarar r aattt ti it i oo n nn IIsollattors Is ss ool l la aattt to o or oo r ss to to Quiet t any y Noisy oi HVAC Unit t * (sold ( l separately) atel ely ) All l pans meet t or exceedx xc eed all l international nationali n building l i g codes and d come e with h a 10 11 00 Year YY ee aa r Liimiitted LLii miittti it te ee dd Warrantty. a aa r rara r a aa nnttt ty t yy. Patents: t : 7,878,019;, ; 7,900,798;,, 798; D562,963 5 3 * See Distributor ibutor for Details 96208 99 66 22 200 088 8 AG--G AAG G ----G G 3 30 33 00 x xx 62 66 22 x xx 4..25 44..2 22 55 C A C S
SPLIT SYSTEM MINI-SPLIT MULTI ZONE Sea Breeze Ductless Mini-Split Multi Zone Air Conditioning and Heat Pump systems offer the perfect solution for an easy install with a sleek design. Models are highly efficient, quiet, easy to operate, and ALL now carry the environmentally friendly 410A refrigerant. Category Evaporator Condensing Units Part No. Capacity (BTUH) Dimensions (in) SEER Voltage Cooling Heating H W D Shipping Weight (lbs) SHE9H4ZIGX 9000 9800 NA 208-230/1 11 34 7 33 400.00 SHE12H4ZIGX 12000 13000 NA 208-230/1 11 34 7 33 600.00 SHE18H4ZIGX 18000 19800 NA 208-230/1 12 38 8 40 660.00 SMZ18H46ZOGX 18000 19000 16 208-230/1 24 35 15 106 2100.00 SMZ30H46ZOGX 29000 30400 16 208-230/1 28 37 16 148 2000.00 SMZ42H46ZOGX 41000 44500 16 208-230/1 44 40 17 247 4700.00 568
SPLIT SYSTEM AIR CONDITIONING SUBSECTION NAME For through wall applications in garden apartments, high rise condos, hotels, professional buildings. Compatible with most indoor units. 12 SEER (R410A units); 10.9 SEER (R22 units) Voltage 208/230/1/60 Madison Series (/D) units offer the following extra features: Interior cabinet insulation Compressor crankcase heater, hard start kit and short cycle timer Spring isolated compressor mounts, expansion loop in discharge line, vibration absorber in suction line Solid state fan motor speed control and pre start timer; 1/2 HP, higher speed fan motors in 2 and 2 1/2 ton models COOLING 1000 SERIES, R410A Dimensions (In.) Connections Ship Wgt. Part No. Tons BTUH H W D Suction x Liquid (In.) (Lbs.) NCPD4181010 1 1/2 18000 28 5/8 26 18 1/2 3/4 3/8 180 2275.54 NCPD4181010/D 1 1/2 18000 28 5/8 26 18 1/2 3/4 3/8 180 2275.54 NCPD4241010 2 23800 28 5/8 26 18 1/2 3/4 3/8 180 2432.08 NCPD4241010/D 2 23800 28 5/8 26 18 1/2 3/4 3/8 180 2432.08 NCPD4301010 2 1/2 27500 28 5/8 26 18 1/2 3/4 3/8 180 2560.36 NCPD4301010/D 2 1/2 27500 28 5/8 26 18 1/2 3/4 3/8 180 2560.36 COOLING 3000 SERIES, R410A Dimensions (In.) Connections Ship Wgt. Part No. Tons BTUH H W D Suction x Liquid (In.) (Lbs.) NCPD4183010 1 1/2 18000 32 23 3/4 18 1/2 3/4 3/8 180 2275.54 NCPD4183010/D 1 1/2 18000 32 23 3/4 18 1/2 3/4 3/8 180 2275.54 NCPD4243010 2 23800 32 23 3/4 18 1/2 3/4 3/8 180 2432.08 NCPD4243010/D 2 23800 32 23 3/4 18 1/2 3/4 3/8 180 2432.08 NCPD4303010/D 2 1/2 27500 32 23 3/4 18 1/2 3/4 3/8 180 2540.36 573
WINDOW UNIT WINDOW UNIT Outstanding Features: Multiple Functions - Cooling, Dehumidifying & Fan Ventilation Installation Kit with Expandable Side Panels Retracting Louvers Slide Out Galvanized Steel Cabinet For Easy Installation Part No. Capacity (BTUH) Dimensions (in) EER Voltage Cooling Heating H W D Open Window Min/Max (in) Shipping Weight (lbs) WA410YRX 10000 NA 9.8 115/60/1 15 20 20 23/36 66 600.00 WHP412ZR 11200 10000 9.5 208-230/60 23 15 23 27/39 115 900.00 WA412YRX 12000 NA 9.8 115/60/1 15 20 21 23/36 73 610.00 WHP418ZR 17000 15700 9 208-230/60 17 26 28 30/38 161 1250.00 WH418ZRX 18500 16000 9.7 208-230/60 17 24 26 27/40 127 1000.00 WA418ZRX 18500 NA 9.7 208-230/60 17 24 26 27/40 122 920.00 WA424ZR 23500 NA 8.5 208-230/60 19 27 27 31/43 152 1200.00 WH424ZM 23500 8700 8.5 208-230/60 19 27 27 31/43 157 1400.00 WA428ZRX 28500 NA 8.5 208-230/60 19 27 26 31/42 151 1460.00 WA46YR 6000 NA 9.7 115/60/1 13 19 16 21/38 53 400.00 WA48YRX 8000 NA 9.8 115/60/1 13 19 16 23/36 55 480.00 WH48YMB 8000 3800 9.8 115/60/1 13 19 16 23/37 92 700.00 WH412ZM 11600 8700 9.8 208-230/60 16 23 24 27/38 103 880.00 575
WINDOW MOUNT AC & HEATING UNITS AIR CONDITIONERS Electronic controls with full feature remote and auto restart on most models Adjustable air direction Easy-access, slide-out, washable filter One degree temperature adjustment Energy saver mode, 24-hour on/off timer and auto restart, energy saver function; auto, dehumidification and sleep modes on most models Capacity (BTUH) Air Delivery Window Dimensions (in) EER Voltage Remote Cooling Heating Max CFM Mount Kit H W D WINDOW MOUNT HEAT PUMP UNITS Electronic controls, wireless remote Automatic louver swing Thru-the-wall or window mount with support bracket included Cooling, heating, fan only and auto operation, energy saver mode Switches to supplemental electric heat at 40oF outside temperature Shipping Weight (lbs) RADS51L 5200 NA 10.7 115-60 146 Yes Yes 12-1/16 16 15-3/8 44 380.00 RADS61L 6000 NA 10.7 115-60 146 Yes Yes 12-1/16 16 15-3/8 44 460.00 RADS81L 8000 NA 10.8 115-60 218 Yes Yes 13-7/16 18-9/16 15-3/4 54 550.00 RADS101L 10000 NA 10.8 115-60 290 Yes Yes 14-11/16 19 21-1/2 68 815.00 RADS121L 12000 NA 10.8 115-60 265 Yes Yes 14-11/16 19 21-1/2 78 850.00 RAD123L 12000 NA 9.8 208/230-60 265 Yes Yes 14-11/16 19 21-1/2 73 1100.00 RADS151L 15000 NA 10.7 115-60 418 Yes Yes 17-15/16 23-5/8 25-7/16 112 1090.00 RADS183L 18000 NA 10.7 208/230-60 447 Yes Yes 17-15/16 23-5/8 25-7/16 128 1215.00 RADS253L 25000 NA 9.4 208/230-60 541 Yes Yes 18-5/8 26-1/2 25-1/2 137 1460.00 REG81L 8000 3500 9.8 115-60 278 Yes Yes 15-9/16 23-1/16 23-7/16 80 1200.00 REG123L 12000 8500 9.8 208/230-60 266 Yes Yes 15-9/16 23-1/16 23-7/16 88 1300.00 REG183L 18000 13000 9.7 208/230-60 459 Yes Yes 17-15/16 23-5/8 25-7/16 127 1365.00 REG253J 25000 13000 9.4 208/230-60 541 Yes Yes 18-5/8 26-1/2 25-1/2 142 1575.00 Capacity (BTUH) Air Delivery Window Dimensions (in) EER Voltage Cooling Heating Max CFM Mount Kit H W D Shipping Weight (lbs) RAH123G 11200 8500 9.5 208/230-60 253 Yes 15-5/16 22-5/8 23-5/8 115 1180.00 RAH183G 17400 9000 9.0 208/230-60 570 Yes 16-7/8 26 27-3/4 161 1600.00 577
THRU-THE-WALL UNITS Electronic controls with full feature remote and auto restart Four-way adjustable air direction Energy saver function and 24-hour on/off timer Interior trim kit included Fits standard wall sleeves Auto and sleep modes AIR CONDITIONERS Capacity (BTUH) Air Delivery Dimensions (in) EER Voltage Remote Cooling Heating Max CFM H W D Shipping Weight (lbs) BG81J 8000 NA 9.4 115-60 283 Yes 14-9/16 24-1/4 20-5/16 68 900.00 BG101J 10000 NA 9.4 115-60 282 Yes 14-9/16 24-1/4 20-5/16 68 980.00 BG103J 9800 NA 9.4 208/230-60 297 Yes 14-9/16 24-1/4 20-5/16 68 980.00 BG121G 12000 NA 9.4 115-60 306 Yes 14-9/16 24-1/4 20-5/16 78 1000.00 BG123J 11700 NA 9.4 208/230-60 296 Yes 14-9/16 24-1/4 20-5/16 76 1025.00 BG143K 13600 NA 8.5 208/230-60 318 Yes 14-9/16 24-1/4 20-5/16 79 1200.00 BGE103J 9800 8600 9.4 208/230-60 295 Yes 14-9/16 24-1/4 20-5/16 76 950.00 BGE123J 11700 8600 9.0 208/230-60 286 Yes 14-9/16 24-1/4 20-5/16 79 1200.00 PORTABLE UNITS Cool a room without any ductwork or any special wiring, and move the unit from room to room as needed Ideal wherever temporary cooling is needed or where a window A/C isn t an option Built-in condensate disposal 48 single hose for fast installation Automatic louver swing Washable filter is easily accessed 24-hour on/off timer, auto restart ASHRAE Standard 128-2001 Capacity (BTUH) Air Delivery Window Dimensions (in) Shipping EER Voltage Cooling Heating Max CFM Mount Kit H W D Weight (lbs) PS101A 10000 NA 8.9 115-60 359 Yes 27-13/16 16-15/16 13-5/16 72 810.00 PS121A 12000 NA 8.9 115-60 241 Yes 27-13/16 16-15/16 13-5/16 72 925.00 578
AIR CONDITIONERS PORTABLE DEHUMIDIFIERS Automatic water level shut-off Drain options include bucket and continuous Easy to use controls Auto restart Slide-out filter with filter light Leak detector Pints/Day Input Amps Bucket Cap. CFM (hi/lo) Sound (dba) Dimensions (in) H W D Shipping Weight (lbs) BHD301H 30 3 6.3 pts 144/124 56/54 20 15 10 30.9 390.00 BHD501H 50 4.7 12.7 pts 188/165 58.5/56.5 23 16 11 38.6 470.00 BHD701H 70 6.9 12.7 pts 188/165 58.5/56.5 23 16 11 41.9 530.00 CASEMENT SERIES For horizontal sliding or casement windows, fits opening 205/16 to 397/16 high, starting at 151/2 wide Electronic controls and remote Four-way adjustable air direction Energy saver mode and 24-hour on/off timer, auto restart Capacity (BTUH) Air Delivery Window Dimensions (in) Shipping Weight EER Voltage Cooling Heating Max CFM Mount Kit H W D (lbs) CD101J 10000 NA 9.5 115-60 339 Yes 20-7/8 14-5/8 23-1/2 80.5 850.00 CD121J 12000 NA 9.5 115-60 339 Yes 20-7/8 14-5/8 23-1/2 88 700.00 579
THRU WALL AIR CONDITIONING PACKAGE TERMINAL AC Sea Breeze PTAC s are a durable choice for new construction, or as replacement units in hospitality and healthcare facilities. Simple design to fit any decor, these units deliver comfort, while saving you money. Easy to use controls and operation. COOLING, R410A Cooling Capacity Aux Heat Ship Wgt Part No. (BTUH) (kw) CFM (Lbs.) PTAC49CH3ZX 9000 3 312 131 1484.00 PTAC412CH3ZX 12000 3 341 136 1554.66 PTAC415CH3ZX 15000 3 341 139 1667.74 Fit industry standard 42" x 16" wall sleeves. Economical performance Washable filters User-friendly controls Low sound levels Humidity control New design with Flex option: change from 2kW, 3kW or 5kW heater with quick connect plug HEAT PUMP, R410A Aux. Heat Ship Wgt. Part No. Capacity (BTUH) (kw) CFM (Lbs.) PTAC49HP3ZX 9000 8100 3 312 133 1515.80 PTAC412HP3ZX 12000 10700 3 341 138 1618.26 PTAC415HP3ZX 15000 13800 3 341 141 1727.80 ACCESSORIES 4250017 Part No. Description 4250019 Wall Sleeve 131.26 4250024 Outdoor Louvered Grill 63.00 4250025 Clear Anodized Grill % 4250027 Outdoor Soft Dove Powder Coated % 2KWPC PTAC Power Cord 20 Amps 2 kw 94.50 5KWPC PTAC Power Cord 30 Amps 5 kw 94.50 4250028 PTAC Drain Kit % 4250029 PTAC Leveling Legs % % Please contact your local Aireco Branch for pricing. 580
PORTABLE ROOM AIR CONDITIONER SUBSECTION NAME PORTABLE, R410A 10+ gallons dehumidification capacity a day 3 fan speeds Washable filter Includes flexible vent hose and window adapter Digital display 24 hour on/off Caster wheels PAS412 and PAS412HP are single pipe units, PAS412D is dual pipe Capacity (BTUH) Dehumidification Dimensions (In.) Weight Part No. Cooling Heating Capacity (GPD) CFM Voltage H x W x D (Lbs) PAS412B 12000 N/A 10.14 235 115/1/60 33 x 17.72 x 14.57 68.2 1200.00 PAS412HP 12000 10000 10.14 235 115/1/60 33 x 17.72 x 14.57 68.2 1230.00 581
PACKAGED TERMINAL AIR CONDITIONER AMANA DIGISMART PACKAGED TERMINAL AIR CONDITIONERS 9,000 BTU Packaged Terminal Air Conditioner with 3.5 kw Electric Heater, R410A Refrigerant, 11.2 Energy Efficiency Ratio and DigiSmart Controls Quiet operation: STC of 28 Assembled in the USA for 30 years Increased dehumidification capacity 100% run-tested at our plant in Fayetteville, TN, for leaks 7 5/8" unit front depth: one of the shallowest silhouettes in the industry today Dimensions (In.) Part No. Capacity (BTU) Electric Heather (kw) H W D Shipping Weight (lbs) PTC093G35AXXX 9000 3.5 16-1/6 42" 21-1/2 117 1525.00 PTC123G35AXXX 12000 3.5 16-1/6 42" 21-1/2 119 1600.00 PTC153G35AXXX 12000 3.5 16-1/6 42" 21-1/2 130 1700.00 PTC153G50AXXX 17100 5 16-1/6 42" 21-1/2 130 1725.00 582
HEAT PUMPS AMANA DIGISMART HEAT PUMPS 7⅝ unit front depth: one of the shallowest silhouettes in the industry today Removable condenser shroud allows easy access to enable regular cleaning of coils Easy pull-out filters that are washable and easy to maintain Filter drier for sealed system refrigerant 7-Button touch pad provides complete control to guests for inroom comfort while maintaining energy efficiency Condensate dispersion system removes condensate from indoor cooling operation and evaporates it into the atmosphere through the condenser Model Capacity (BTU) Electric Heater (KW) Dimensions / in. H W D Shipping Weight PTH073G35AXXX 6800 3.5 16-1/6 x 42" x 21-1/2 123 1600.00 PTH093G25AXXX 8300 2.5 16-1/6 x 42" x 21-1/2 127 1700.00 PTH093G35AXXX 8300 3.5 16-1/6 x 42" x 21-1/2 127 1700.00 PTH123G35AXXX 11500 3.5 16-1/6 x 42" x 21-1/2 132 1800.00 PTH123G50AXXX 11500 5 16-1/6 x 42" x 21-1/2 132 1810.00 PTH153G35AXXX 13800 3.5 16-1/6 x 42" x 21-1/2 143 1850.00 PTH153G50AXXX 13800 16-1/6 x 42" x 21-1/2 143 1900.00 PTH154G35AXXX 13300 3.7 16-1/6 x 42" x 21-1/2 143 1880.00 583
CENTRAL AIR CONDITIONING HEAT PUMP SYSTEM - 2 TO 5 TONS One-Piece Blower Unit with DX Coil HORIZONTAL FAN COIL UNIT DIMENSIONS Standard Fan Coil Features Fully Insulated, Corrosion-Resistant Cabinet with Baked Enamel Finish, 1-1/2 lb. Density Batt Six-Row Copper Tube Aluminum Fin Evaporator Coil Removes Up to 30% More Humidity than Conventional Coil CENTRAL AIR CONDITIONING Blower Motor is Factory-Balanced for Vibration- Free Operation Condensate Drain Connection in Base Pan for Specially-Designed, Factory-Supplied Condensate Drain Assembly Factory-Assembled, Pre-Wired Control Center with High and Low Voltage Terminal Blocks, Blower Relay and Low Voltage Transformer Model ESP-2430G ESP-3642G ESP-4860G ELECTRI PAK Nom. System Capacity Std. CFM @ Motor HP Nom. Tons Cool MBH* 1.5" W.C. F.L. Amps Connections Suction Line Liquid Line Height Width Length Ship Wt. 2 24 550 1/3 1.8 7/8" 3/8" 14-1/8" 24-1/8" 29-3/8" 120 37288 30 700 1/3 1.8 7/8" 3/8" 14-1/8" 24-1/8" 29-3/8" 120 3 36 850 1/2 2.8 7/8" 3/8" 14-1/8" 33-1/8" 29-3/8" 144 37316 42 1000 1/2 2.8 7/8" 3/8" 14-1/8" 33-1/8" 29-3/8" 144 4 48 1150 1 3.6 7/8" 3/8" 14-1/8" 43-1/8" 29-3/8" 171 5 60 1300 1 3.6 7/8" 3/8" 14-1/8" 43-1/8" 29-3/8" 171 Integral Electric Heat Module for DX Fan Coil Units Designed to provide a heating option for SpacePak systems. Easy to install in both new and existing systems and fit directly inside horizontal fan coil units. Equipped with an internal modulating feature, heat discharge temperatures are sensed and can be controlled regardless of load condition. Heater design eliminates the need for external regulating devices such as a multi-stage (W3) and/or outdoor thermostat. 3265.00 3500.00 3875.00 Specifications Electric Heat Module Model Heat Output @ 240V 208/1/60 230/1/60 FLA / MCA FLA / MCA Fan Coil Unit AC-EPAK-10G 10kW 48 / 60 43 / 54 ESP-2430G 1730.00 AC-EPAK-15G 15kW 72 / 90 65 / 82 ESP-3642G 2780.00 AC-EPAK-20G 20kW 96 / 120 87 / 109 ESP-4960G 3050.00 584
SELF CONTAINED AIR CONDITIONING HWC4 MODEL VINTAGE UNITS GAS HEATING/ELECTRIC COOLING PACKAGED THRU-THE-WALL UNITS EWC4 MODEL VINTAGE UNITS ELECTRIC HEATING / ELECTRIC COOLING PACKAGED THRU-THE WALL UNITS Features Completely self-controlled heating and cooling package Pre-wired and pre-charged Slide-out cooling chassis Internal vent system (direct vent) Refrigerant System High-efficiency compressor Copper tubing with enhanced fin coils R410a Refrigerant Heat Exchanger Standard aluminized steel tubular heat exchanger Voltage 208-230/1/60 Cabinet Dimensions 43 H x 28 W x 29½ D Blower Multispeed motor for wide airflow range Model Nominal Capacity (tons) Cooling Heating Btuh EER Input Btuh 26HWC4-09-121 1 11400 9.0 26,000 5852.00 38HWC4-09-121 1 11400 9.0 38,000 5880.00 38HWC4-09-181 1 1/2 17000 9.0 38,000 5728.00 51HWC4-09-181 1 1/2 17000 9.0 51,000 4329.00 64HWC4-09-181 1 1/2 17000 9.0 64,000 5832.00 Features Individually metered and controlled Slide-out cooling chassis Voltage 208-230/60/1 Refrigerant System Dimensions 43 H x 28 W x 29½ D R410a Refrigerant Blower PSC permanently lubricated motor for low maintenance and maximum efficiency Nominal Cooling Heating Model Capacity (tons) Btuh EER Input Btuh 5EWC4-09-121 1 11400 9.0 16,300 4724.00 10EWC4-09-121 1 11400 9.0 32,700 4948.00 5EWC4-09-181 1 1/2 17000 9.0 16,300 4848.00 7EWC4-09-181 1 1/2 17000 9.0 24,600 4920.00 10EWC4-09-181 1 1/2 17000 9.0 32,700 5008.00 38HWC4-09-241 2 22400 9.0 38,000 6136.00 51HWC4-09-241 2 22400 9.0 51,000 6476.00 64HWC4-09-241 2 22400 9.0 64,000 6520.00 51HWC4-09-301 1 1/2 28000 9.0 51,000 6844.00 64HWC4-09-301 1 1/2 28000 9.0 64,000 6888.00 Accessories Description Kit Number Wall Sleeve CA-239 276.00 Decorative External Louver ALVR42-1 560.00 Wall Sleeve Adaptor Kit A242 494.50 15EWC4-09-181 1 1/2 17000 9.0 49,100 5316.00 5EWC4-09-241 2 22400 9.0 16,300 5496.00 7EWC4-09-241 2 22400 9.0 24,600 5432.00 10EWC4-09-241 2 22400 9.0 32,700 5684.00 15EWC4-09-241 2 22400 9.0 49,100 5948.00 20EWC4-09-241 2 22400 9.0 65,500 6076.00 10EWC4-09-301 2 1/2 28000 9.0 32,700 5876.00 15EWC4-09-301 2 1/2 28000 9.0 49,100 6312.00 20EWC4-09-301 2 1/2 28000 9.0 65,500 6564.00 586
PACKAGED THRU-THE-WALL UNITS MCE4 ELECTRIC HEATING/ELECTRIC COOLING UNITS Features Up to 10.4 EER cooling efficiency Individually metered and controlled Louver color options to match building façade Refrigerant System High-efficiency compressor Copper tubing with enhanced fin s SUBSECTION NAME Blower Four-speed permanently lubricated motor for low maintenance, maximum efficiency and wide airflow range Voltage 208-230/60/1 587
PACKAGED THRU-THE-WALL UNITS MGE4 GAS HEATING/ELECTRIC COOLING UNITS Features Up to 10.6 EER cooling efficiency Louver color options to match building façade Internal vent system (direct vent) Refrigerant System High-efficiency compressor Heat Exchanger Standard aluminized steel heat exchanger Optional 409 stainless steel heat exchanger Voltage 208-230/60/1 Model Nominal tons Cooling Dimensions (inches) Heating @240V Btuh Btuh EER H W L 3MCE4-09-121P 1 12000 9.0 43 28 21½ 12200 4920.00 5MCE4-09-121P 1 12000 9.0 43 28 21½ 16300 4940.00 7MCE4-09-121P 1 12000 9.0 43 28 21½ 24500 4964.00 3MCE4-09-181P 1 ½ 17200 9.0 43 28 21½ 12200 5016.00 5MCE4-09-181P 1 ½ 17200 9.0 43 28 21½ 16300 5040.00 7MCE4-09-181P 1 ½ 17200 9.0 43 28 21½ 24500 5056.00 10MCE4-09-181P 1 ½ 17200 9.0 43 28 21½ 32700 5076.00 5MCE4-09-241P 2 22400 9.0 43 28 21½ 16300 5500.00 7MCE4-09-241P 2 22400 9.0 43 28 21½ 24500 5528.00 10MCE4-09-241P 2 22400 9.0 43 28 21½ 32700 5540.00 5MCE4-09-301P 2 ½ 27400 9.0 43 28 21½ 16300 5676.00 7MCE4-09-301P 2 ½ 27400 9.0 43 28 21½ 24500 5692.00 10MCE4-09-301P 2 ½ 27400 9.0 43 28 21½ 32700 5708.00 5MCE4-09-361P 3 35000 9.0 43 28 21½ 16300 6468.00 7MCE4-09-361P 3 35000 9.0 43 28 21½ 24500 6512.00 10MCE4-09-361P 3 35000 9.0 43 28 21½ 32700 6560.00 3MCE4-10-181P 1 ½ 18000 10.0 47 28 24 12200 5604.00 5MCE4-10-181P 1 ½ 18000 10.0 47 28 24 16300 5628.00 7MCE4-10-181P 1 ½ 18000 10.0 47 28 24 24500 5648.00 10MCE4-10-181P 1 ½ 18000 10.0 47 28 24 31700 5668.00 5MCE4-10-241P 2 22400 10.0 47 28 24 16300 5896.00 7MCE4-10-241P 2 22400 10.0 47 28 24 24500 5908.00 10MCE4-10-241P 2 22400 10.0 47 28 24 31700 5924.00 5MCE4-10-301P 2 ½ 28400 10.0 55 28 24 16300 6036.00 7MCE4-10-301P 2 ½ 28400 10.0 55 28 24 24500 6056.00 10MCE4-10-301P 2 ½ 28400 10.0 55 28 24 32700 6072.00 588
PACKAGED THRU-THE-WALL UNITS MGE4 GAS HEATING/ELECTRIC COOLING UNITS SUBSECTION NAME Features Up to 10.6 EER cooling efficiency Louver color options to match building façade Internal vent system (direct vent) Refrigerant System High-efficiency compressor Heat Exchanger Standard aluminized steel heat exchanger Optional 409 stainless steel heat exchanger Voltage 208-230/60/1 Model Cooling Heating 47 F Dimensions (inches) Elec Heat @240V Btuh EER Btuh H W L kw/hr Btuh 3MHP4-09-121P 12700 9.0 11600 43-7/8 28-1/6 21-1/2 3.6 12200 5532.00 5MHP4-09-121P 12700 9.0 11600 43-7/8 28-1/6 21-1/2 4.8 16300 5556.00 7MHP4-09-121P 12700 9.0 11600 43-7/8 28-1/6 21-1/2 7.2 24500 5576.00 3MHP4-09-181P 16800 9.0 16000 43-7/8 28-1/6 21-1/2 3.6 12200 6276.00 5MHP4-09-181P 16800 9.0 16000 43-7/8 28-1/6 21-1/2 4.8 16300 6284.00 7MHP4-09-181P 16800 9.0 16000 43-7/8 28-1/6 21-1/2 7.2 24500 6312.00 10MHP4-09-181P 16800 9.0 16000 43-7/8 28-1/6 21-1/2 9.6 32700 6328.00 5MHP4-09-241P 23000 9.0 21600 47-13/16 28-1/6 24-3/8 4.8 16300 6964.00 7MHP4-09-241P 23000 9.0 21600 47-13/16 28-1/6 24-3/8 7.2 24500 6976.00 10MHP4-09-241P 23000 9.0 21600 47-13/16 28-1/6 24-3/8 9.6 32700 7008.00 5MHP4-09-301P 29000 9.0 30000 47-13/16 28-1/6 24-3/8 4.8 16300 7416.00 7MHP4-09-301P 29000 9.0 30000 47-13/16 28-1/6 24-3/8 7.2 24500 7440.00 10MHP4-09-301P 29000 9.0 30000 47-13/16 28-1/6 24-3/8 9.6 32700 7456.00 5MHP4-09-361P 34000 9.0 35000 55-13/16 28-1/6 24-3/8 4.8 16300 7852.00 7MHP4-09-361P 34000 9.0 35000 55-13/16 28-1/6 24-3/8 7.2 24500 7892.00 10MHP4-09-361P 34000 9.0 35000 55-13/16 28-1/6 24-3/8 9.6 32700 7948.00 3MHP4-10-181P 17000 10.00 17000 47-13/16 28-1/6 24-3/8 3.6 12200 7152.00 5MHP4-10-181P 17000 10.00 17000 47-13/16 28-1/6 24-3/8 4.8 16300 7168.00 7MHP4-10-181P 17000 10.00 17000 47-13/16 28-1/6 24-3/8 7.2 24500 7180.00 10MHP4-10-181P 17000 10.00 17000 47-13/16 28-1/6 24-3/8 9.6 32700 7204.00 5MHP4-10-241P 23000 10.40 23000 47-13/16 28-1/6 24-3/8 4.8 16300 7480.00 7MHP4-10-241P 23000 10.40 23000 47-13/16 28-1/6 24-3/8 7.2 24500 7500.00 10MHP4-10-241P 23000 10.40 23000 47-13/16 28-1/6 24-3/8 9.6 32700 7520.00 5MHP4-10-301P 28000 10.20 28000 55-13/16 28-1/6 24-3/8 4.8 16300 7908.00 7MHP4-10-301P 28000 10.20 28000 55-13/16 28-1/6 24-3/8 7.2 24500 7924.00 10MHP4-10-301P 28000 10.20 28000 55-13/16 28-1/6 24-3/8 9.6 32700 7936.00 589
HVAC SPLIT SYSTEM MFZ FLOOR-MOUNTED INDOOR UNIT For single room comfort, the Mitsubishi MFZ-B Series can t be beat. Paired with an MXZ outdoor unit (sold separately), you re assured of quality, comfortable heating and air conditioning for years to come. This slim profile floor unit offers quiet operation, auto restart after a power outage and auto fan speed control. This unit can also be recess mounted low on a wall. Features Helps Save On Energy Bills R-410A Refrigerant Slim Profile Mitsubishi Excellence in Quality Hand Held Remote Included Model Cooling Btu/h Phase, Cycle, Voltage Heating 47 F Btuh Dimensions (inches) W D H MFZ-KA09NA 9,000 1, 60Hz, 208/230V*3 10,900 27-9/16 7-7/8 23-5/8 32 2086.00 MFZ-KA12NA 12,000 1, 60Hz, 208/230V*3 14,400 27-9/16 7-7/8 23-5/8 32 2438.00 MFZ-KA18NA 18,000 1, 60Hz, 208/230V*3 21,600 27-9/16 7-7/8 23-5/8 32 2990.00 Weight MSZ WALL MOUNTED INDOOR UNITS The MSZ-Series features wall mounted heat pump mini split indoor units for use in single zone and multi-zone systems. The functional design is paired with quiet operations that provide comfort without disrupting your space and installing a Mitsubishi wall mounted indoor unit is quick and easy thanks to their convenient mounting plate. With multiple operating modes, multiple fan speeds, and multiple airflow directions, these units fit the needs of nearly any room. Whether you are designing a primary heating and cooling system or supplementing an existing one, the MSZ-Series is an excellent addition. Model Cooling Btu/h Phase, Cycle, Voltage Heating 47 F Btuh Dimensions (inches) W D H MSZ-FE09NA-8 9,000 1, 60Hz, 208/230V*3 10,900 31-3/8 10-1/8 11-5/8 27 916.00 MSZ-FE12NA-8 12,000 1, 60Hz, 208/230V*3 13,600 31-3/8 10-1/8 11-5/8 27 1080.00 MSZ-FE18NA 18,000 1, 60Hz, 208/230V*3 21,600 43-5/16 9-3/8 12-13/16 37 1384.00 MSZ-GE06NA-8 6,000 1, 60Hz, 208/230V*3 7,200 31-7/16 9-1/8 11-5/8 22 774.00 MSZ-GE09NA-8 9,000 1, 60Hz, 208/230V*3 10,900 31-7/16 9-1/8 11-5/8 22 852.00 MSZ-GE12NA-8 12,000 1, 60Hz, 208/230V*3 14,400 31-7/16 9-1/8 11-5/8 22 1008.00 MSZ-GE15NA-8 14,000 1, 60Hz, 208/230V*3 18,000 31-7/16 9-1/8 11-5/8 22 1222.00 MSZ-GE18NA-8 17,200 1, 60Hz, 208/230V*3 21,600 31-7/16 9-1/8 11-5/8 22 1274.00 MSZ-GE24NA 22,500 1, 60Hz, 208/230V*3 27,600 43-5/16 9-3/8 12-13/16 37 1424.00 Weight 590
SEZ SERIES MITSUBISHI HVAC SPLIT SYSTEM The Mr. Slim series from Mitsubishi Electric SEZ ducted units can provide split air-conditioning system advantages with the added benefit of being concealed to provide virtually no visual footprint within the conditioned space other than a register and grille for the air to flow. With the use of short run ductwork, these units can provide comfort to a single room that needs air dispersed evenly throughout the space, unusually shaped rooms, and adjacent rooms. Thermostat required for operation - Sold Separately. Horizontal-ducted indoor unit for residential applications Ultra thin body: 7-7/8 high Built-in drain mechanism for condensate removal; lifts to 21-11/16 Air filter is included with indoor unit Dimensions (inches) Model Cooling Btu/h Phase, Cycle, Voltage Heating 47 F Btuh W D H Weight SEZ-KD09NA4 8,100 1, 60Hz, 208/230V*4 10,900 31-1/8 27-9/16 7-7/8 42 1392.00 SEZ-KD12NA4 11,500 1, 60Hz, 208/230V*4 13,600 39 27-9/16 7-7/8 50 1502.00 SEZ-KD15NA4 14,100 1, 60Hz, 208/230V*4 18,000 39 27-9/16 7-7/8 54 1736.00 SEZ-KD18NA4 17,200 1, 60Hz, 208/230V*4 21,600 46-7/8 27-9/16 7-7/8 62 1950.00 MULTI-ZONE MXZ-B HEAT PUMP Total zone control: The MXZ Series provides individually controlled rooms (up to 8 depending on system selected) using a single outdoor unit. With the MXZ-B multi-zone heat pump systems, you can enjoy ideal levels of comfort in the rooms you use most while reducing your energy costs. People in different rooms - like the kitchen, master bedroom or living room - can set temperatures, air flow, and speed for personalized comfort. Features: Complete range of capacity options from 20,000-48,000 Btu/h 2, 3, 4, 5 and 8 port systems Individual zone control Mix and match flexibility of indoor unit styles and combinations A wide range of indoor unit capacities that match the room size and requirements Heating 47 F Dimensions (inches) Model Cooling Btu/h Phase, Cycle, Voltage Btuh H W D MXZ-8B48NA 48,000 1, 60Hz, 208/230V 54,000 53-3/16 37-7/16 14-3/16 % 591
SLZ CEILING-RECESSED INDOOR UNIT General Features Four-way 2 x2 ceiling-cassette indoor unit for ceiling recessed applications Built-in drain mechanism for condensate removal; lifts to 19-11/16 Wide air-flow pattern for better air distribution Long-life air filter included with indoor unit Indoor unit powered from outdoor unit using A-Control Model Cooling Btu/h Phase, Cycle, Voltage HVAC SPLIT SYSTEM Heating 47 F Btuh Dimensions (inches) W D H SLZ-KA09NA 8,400 1, 60Hz, 208/230V*3 10,900 22-7/16 22-7/16 9-1/4 36 1580.00 SLZ-KA12NA 11,100 1, 60Hz, 208/230V*3 13,600 22-7/16 22-7/16 9-1/4 36 1800.00 SLZ-KA15NA 15,000 1, 60Hz, 208/230V*3 18,000 22-7/16 22-7/16 9-1/4 36 2152.00 Weight MITSUBISHI MS-A09WA-1 - M SERIES 9,500 BTU Cooling Only Wall Mounted Air Conditioner Air Handler. This product is a brand new genuine Mitsubishi cooling only air handler. Part No. Capacity (BTUH) TOTAL SEER Voltage Connections (In.) SAE Dimensions (In.) Liquid Weight Indoor Outdoor Cool INPUT Suction W H D MS-A09WA 9,500 870 13.0 115 3/8" 1/4" 31-1/2 21-5/8 11-1/4 78 572.00 MU-A09WA 9,500 870 13.0 115 3/8" 1/4" 31-1/2 21-5/8 11-1/4 78 1202.00 MS-A12WA 12,000 1,070 13.0 115 1/2" 1/4" 33-7/16 23-13/16 11-7/16 96 656.00 MU-A12WA 12,000 1,070 13.0 115 1/2" 1/4" 33-7/16 23-13/16 11-7/16 96 1248.00 592
HVAC SPLIT SYSTEM MITSUBISHI MSY-GE24NA - M SERIES AIR HANDLER 22,500 BTU Cooling Only Up To 19 SEER Wall Mounted Air Conditioner Air Handler. This product is a brand new genuine Mitsubishi cooling only air handler. Part No. Capacity (BTUH) Phase/Cycle/ Connections (In.) SAE Dimensions (In.) TOTAL INPUT SEER Liquid Indoor Outdoor Cool Voltage Suction W D H MSY-GE09NA-8 9,000 660 (205-1,200) 21.0 1/60Hz, 208/230V*2 3/8" 1/4" 31-7/16 9-1/8 11-5/8 22 644.00 Weight MUY-GE09NA 9,000 660 (205-1,200) 21.0 1/60Hz, 208/230V*2 3/8" 1/4" 31-1/2 11-1/4 21-5/8 66 1352.00 MSY-GE12NA-8 12,000 960 (205-1,300) 20.5 1/60Hz, 208/230V*2 3/8" 1/4" 31-7/16 9-1/8 11-5/8 22 728.00 MUY-GE12NA 12,000 960 (205-1,300) 20.5 1/60Hz, 208/230V*2 3/8" 1/4" 31-1/2 11-1/4 21-5/8 77 1398.00 MSY-GE15NA-8 14,000 1,080 (160-2,000) 21.0 1/60Hz, 208/230V*2 1/2" 1/4" 31-7/16 9-1/8 11-5/8 22 994.00 MUY-GE15NA-1 14,000 1,080 (160-2,000) 21.0 1/60Hz, 208/230V*2 1/2" 1/4" 31-1/2 11-1/4 21-5/8 80 1690.00 MSY-GE18NA-8 17,200 1,640 (240-2,070) 19.2 1/60Hz, 208/230V*2 1/2" 1/4" 31-7/16 9-1/8 11-5/8 22 1184.00 MUY-GE18NA-1 17,200 1,640 (240-2,070) 19.2 1/60Hz, 208/230V*2 1/2" 1/4" 33-1/6 13 33-7/16 119 2054.00 MSY-GE24NA 22,500 1,800 (570-3,580) 19.0 1/60Hz, 208/230V*2 5/8" 3/8" 43-5/16 9-3/8 12-13/16 37 1320.00 MUY-GE24NA 22,500 1,800 (570-3,580) 19.0 1/60Hz, 208/230V*2 5/8" 3/8" 33-1/16 13 34-5/8 119 2412.00 MSY-D30NA-8 30,700 3,380 (620-3,380) 16.0 1/60Hz, 208/230V*2 5/8" 3/8" 46-1/16 11-5/8 14-3/8 40 1366.00 MUY-D30NA-1 30,700 3,380 (620-3,380) 16.0 1/60Hz, 208/230V*2 5/8" 3/8" 33-1/16 13 33-7/16 126 3068.00 MSY-D36NA-8 34,600 4,240 (620-4,240) 15.1 1/60Hz, 208/230V*2 5/8" 3/8" 46-1/16 11-5/8 14-3/8 40 1618.00 MUY-D36BA-1 34,600 4,240 (620-4,240) 15.1 1/60Hz, 208/230V*2 5/8" 3/8" 33-1/16 13 33-7/16 126 4024.00 MITSUBISHI SUZ-KA15NA.TH - SUZ SERIES 14,100 BTU Cooling 18,000 BTU Heating 15.5 Single Zone Heat Pump Condenser. This product is a brand new genuine Mitsubishi single zone heat pump condenser. Part No. Capacity (BTUH) TOTAL Phase/Cycle/ Connections (In.) SAE Dimensions (In.) SEER Liquid Weight Indoor Outdoor Cool INPUT Voltage Suction W D H SEZ-KD09NA4 8,100 670 15.0 1/60Hz, 208/230V*4 3/8" 1/4" 31-18 27-9/16 7-7/8 42 1392.00 SUZ-KA09NA 8,100 670 15.0 1/60Hz, 208/230V*4 3/8" 1/4" 31-1/2 11-1/4 21-5/8 66 1580.00 SEZ-KD12NA4 11,500 920 16.0 1/60Hz, 208/230V*4 3/8" 1/4" 39 27-9/16 7-7/8 50 1502.00 SUZ-KA12NA 11,500 920 16.0 1/60Hz, 208/230V*4 3/8" 1/4" 31-1/2 11-1/4 21-5/8 77 1800.00 SEZ-KD15NA4 14,100 1,170 15.5 1/60Hz, 208/230V*4 1/2" 1/4" 39 27-9/16 7-7/8 54 1736.00 SUZ-KA15NA 14,100 1,170 15.5 1/60Hz, 208/230V*4 1/2" 1/4" 31-1/2 11-1/4 21-5/8 80 2152.00 SEZ-KD18NA4 17,200 1,380 17.5 1/60Hz, 208/230V*4 1/2" 1/4" 46-7/8 27-9/16 7-7/8 62 1950.00 SUZ-KA18NA 17,200 1,380 17.5 1/60Hz, 208/230V*4 1/2" 1/4" 33-1/6 13 33-7/16 119 2736.00 593
HVAC SPLIT SYSTEM MITSUBISHI MSZ-D30NA-8 - M SERIES 30,700 BTU Cooling 32,600 BTU Heating Wall Mounted Heat Pump Air Handler. This product is a brand new genuine Mitsubishi heat pump air handler. Part No. Capacity (BTUH) TOTAL Phase/Cycle/ Connections Dimensions (In.) SEER Liquid Weight Indoor Outdoor Cool INPUT Voltage (In.) SAE W D H MSZ-FE09NA-8 9,000 580 (160-650) 26.0 1/60Hz, 208/230V*4 3/8" 1/4" 31-3/8 10-1/8 11-5/8 27 916.00 MUZ-FE09NA-1 9,000 580 (160-650) 26.0 1/60Hz, 208/230V*4 3/8" 1/4" 31-1/2 11-1/4 21-5/8 80 1730.00 MSZ-FE12NA-8 12,000 930 (160-960) 23.0 1/60Hz, 208/230V*4 3/8" 1/4" 31-3/8 10-1/8 11-5/8 27 1080.00 MUZ-FE12NA1 12,000 930 (160-960) 23.0 1/60Hz, 208/230V*4 3/8" 1/4" 31-1/2 11-1/4 21-5/8 80 1886.00 MSZ-FE18NA 18,000 1,270 570-2,280 20.2 1/60Hz, 208/230V*4 5/8" 3/8" 43-5/16 9-3/8 12-13/16 37 1384.00 MUZ-FE18NA1 18,000 1,270 570-2,280 20.2 1/60Hz, 208/230V*4 5/8" 3/8" 33-1/16 13 34-5/8 119 2808.00 MSZ-GE09NA-8 9,000 660 (205-1,200) 21.0 1/60Hz, 208/230V*4 3/8" 1/4" 31-7/16 9-1/8 11-5/8 22 852.00 MUZGE09NA 9,000 660 (205-1,200) 21.0 1/60Hz, 208/230V*4 3/8" 1/4" 31-1/2 11-1/4 21-5/8 66 1514.00 MSZ-GE12NA-8 12,000 960 (205-1,300) 20.5 1/60Hz, 208/230V*4 3/8" 1/4" 31-7/16 9-1/8 11-5/8 22 1008.00 MUZ-GE12NA 12,000 960 (205-1,300) 20.5 1/60Hz, 208/230V*4 3/8" 1/4" 31-1/2 11-1/4 21-5/8 77 1644.00 MSZ-GE15NA-8 14,000 1,080 (160-2,000) 21.0 1/60Hz, 208/230V*4 1/2" 1/4" 31-7/16 9-1/8 22 1222.00 MUZ-GE15NA-1 14,000 1,080 (160-2,000) 21.0 1/60Hz, 208/230V*4 1/2" 1/4" 31-1/2 11-1/4 21-5/8 80 2028.00 MSZ-GE18NA-8 17,200 1,640 (240-2,070) 19.2 1/60Hz, 208/230V*4 1/2" 1/4" 31-7/16 9-1/8 11-5/8 22 1274.00 MUZ-GE18NA-1 17,200 1,640 (240-2,070) 19.2 1/60Hz, 208/230V*4 1/2" 1/4" 33-1/16 13 33-7/16 119 2502.00 MSZ-GE24NA 22,500 1,800 (570-3,580) 19 1/60Hz, 208/230V*4 5/8" 3/8" 43-5/16 9-3/8 12-13/16 37 1424.00 MUZ-GE24NA 22,500 1,800 (570-3,580) 19 1/60Hz, 208/230V*4 5/8" 3/8" 33-1/16 13 119 2828.00 MSZ-D30NA-8 30,700 3,850 (620-3,850) 14.5 1/60Hz, 208/230V*4 5/8" 3/8" 46-1/16 11-5/8 14-3/8 40 1514.00 MUZ-D30NA-1 30,700 3,850 (620-3,850) 14.5 1/60Hz, 208/230V*4 5/8" 3/8" 33-1/16 13 33-7/16 141 3412.00 MSZ-D36NA-8 33,200 4,360 (620-4,360) 14.5 1/60Hz, 208/230V*4 5/8" 3/8" 46-1/16 11-5/8 14-3/8 40 2034.00 MUZ-D36NA-1 33,200 4,360 (620-4,360) 14.5 1/60Hz, 208/230V*4 5/8" 3/8" 33-1/16 13 33-7/16 141 4322.00 594
VERTICAL, WALL MOUNTED UNIT SUBSECTION NAME SELF CONTAINED AIR CONDITIONING AND HEAT PUMP Packaged vertical self contained wall hung air conditioners and heat pumps typically used in modular facilities, telecom buildings and trailers. Designed for ducted or non ducted applications. Includes barometric damper with washable outdoor air filter, phase monitor (3ø units only). Efficiency rating of 9.0 EER on V Series models COP of 3.0 on H Series Reciprocating (V**A) or efficient scroll (V**B) compressors Field installed electric heat packages available from 5 kw to 18 kw Designed for ducted or non-ducted applications Rugged, commercial-grade 16- and 20-gauge G-90 galvanized construction protected by a 1000-hour salt spray, baked-on polyester finish Multi-function circuit boards can incorporate LP, HP switches. (optional) Plug-in control options and heater receptacle minimize field wiring for control options and electric heaters (standard on all models) Built-in circuit breakers with lockable outside access door on all models (disconnect on 460 volt models) Permanently-lubricated indoor and outdoor motors; indoor blower assembly designed for quiet operation in ducted or free-blow applications ARI performance certified, ETL certified VERTICAL, WALL MOUNT, AIR COOLED, R410A Capacity Voltage Dimensions (In.) Ship Wgt Part No. BTUH (Vac) MCA (Amps) CFM / ESP L D H (Lbs.) V418B00A1FDSNB 16500 208-230/1/60 11 615 0.35 34 18 5/8 71 1/2 305 3262.34 V424B00A1FDSNB 23600 208-230/1/60 19 780 0.15 34 18 5/8 71 1/2 305 3272.06 V430B00A1FDSNB 29400 208-230/1/60 24 1100 0.2 38 18 5/8 71 1/2 349 3543.12 V430B00A3FDSNB 29400 208-230/3/60 17 1100 0.2 38 18 5/8 71 1/2 349 3801.66 V436B00A1FDSNB 35000 208-230/1/60 26 1150 0.2 38 18 5/8 71 1/2 352 3734.94 V436B00A3FDSNB 35000 208-230/3/60 21 1150 0.2 38 18 5/8 71 1/2 352 4021.28 V436B00A4FDSNB 35000 460/3/60 10 1150 0.2 38 18 5/8 71 1/2 352 4359.04 V448B00A1FDSNB 47000 208-230/1/60 33 1700 0.2 41 24 87 524 4834.42 V448B00A3FDSNB 47000 208-230/3/60 24 1700 0.2 41 24 87 524 5115.20 V448B00A4FDSNB 47000 460/3/60 11 1700 0.2 41 24 87 524 5487.72 V460B00A1FDSNB 55000 208-230/1/60 45 1980 0.2 41 24 87 545 5480.78 V460B00A3FDSNB 55000 208-230/3/60 33 1980 0.2 41 24 87 545 5757.38 V460B00A4FDSNB 55000 460/3/60 15 1980 0.2 41 24 87 545 6049.28 VERTICAL, WALL MOUNT, HEAT PUMP, R410A Capacity (BTUH) MCA Dimensions (In.) Ship Wgt Part No. Cooling Heating (at 47 F) EER Voltage (Amps) CFM / ESP L D H (Lbs.) H424B00A1FDSNB 23600 24000 9.2 208-230/1/60 19 780 0.15 34 18 5/8 71 1/2 305 3835.02 H430B00A1FDSNB 29400 29000 9.2 208-230/1/60 24 1100 0.2 38 18 5/8 71 1/2 349 4179.74 H430B00A3FDSNB 29400 29000 9.2 208-230/3/60 17 1100 0.2 38 18 5/8 71 1/2 349 4356.26 H436B00A1FDSNB 35000 34300 9.2 208-230/1/60 26 1150 0.2 38 18 5/8 71 1/2 352 4297.88 H436B00A3FDSNB 35000 34300 9.2 208-230/3/60 21 1150 0.2 38 18 5/8 71 1/2 352 4553.64 H436B00A4FDSNB 35000 34300 9.2 460/3/60 10 1150 0.2 38 18 5/8 71 1/2 352 4714.88 H448B00A1FDSNB 47000 46000 9.2 208-230/1/60 33 1700 0.2 41 24 87 524 5608.66 H448B00A3FDSNB 47000 46000 9.2 208-230/3/60 24 1700 0.2 41 24 87 524 5797.70 H448B00A4FDSNB 47000 46000 9.2 460/3/60 11 1700 0.2 41 24 87 524 5954.76 H460B00A1FDSNB 55000 55000 9.2 208-230/1/60 45 1980 0.2 41 24 87 545 6421.80 H460B00A3FDSNB 55000 55000 9.2 208-230/3/60 33 1980 0.2 41 24 87 545 6516.32 H460B00A4FDSNB 55000 55000 9.2 460/3/60 15 1980 0.2 41 24 87 545 6691.46 595
ELECTRIC HEAT ACCESSORIES - AC Heaters for Eubank wall units ELECTRIC HEAT ACCESSORIES - HEAT PUMP Heaters for Eubank wall units Part No. Voltage kw Rating Nominal Capacity (BTUH) EGA05B1AC 240/1/60 5 17000 166.80 208/1/60 3.75 12750 EGA10B1AC 240/1/60 10 34000 237.70 208/1/60 7.5 25500 EGH15B1AC 240/1/60 15 51000 328.04 208/1/60 11.25 38250 EGH06B3AC 240/3/60 6 20000 190.44 208/3/60 4.5 15000 EGH11B3AC 240/3/60 11 37000 269.66 208/3/60 8.25 27750 EGH18B3AC 240/3/60 18 61000 423.96 208/3/60 13.5 45750 EGH11D4AC 480/3/60 11 37000 314.14 EGH15D4AC 480/3/60 15 51000 415.62 Part No. Voltage kw Rating Nominal Capacity (BTUH) EGA05B1AC 240/1/60 5 17000 166.80 208/1/60 3.75 12750 EGA10B1AC 240/1/60 10 34000 237.70 208/1/60 7.5 25500 EGH15B1AC 240/1/60 15 51000 328.04 208/1/60 11.25 38250 EGH06B3AC 240/3/60 6 20000 190.44 208/3/60 4.5 15000 EGH11B3AC 240/3/60 11 37000 269.66 208/3/60 8.25 27750 EGH18B3AC 240/3/60 18 61000 423.96 208/3/60 13.5 45750 EGH11D4AC 480/3/60 11 37000 314.14 EGH15D4AC 480/3/60 15 51000 415.62 WALL MOUNT ACCESSORIES Part No. Description 710800 Supply Grill, 2 Ton, White 61.16 710805 Supply Grill, 2 1/2 to 3 Ton, White 84.80 710810 Supply Grill, 4 to 5 Ton, White 122.32 710830 Return Grill, 2 Ton, White 87.58 710835 Return Grill, 2 1/2 to 3 Ton, White 137.62 710840 Return Grill, 4 to 5 Ton, White 166.80 Part No. Description ABOPT High/Low Pressure Control 102.86 BOPT Low Pressure Control 58.38 COPTR Low Ambient Control, Reciprocating 139.00 COPTS Low Ambient Control, Scroll 139.00 ECON3V Economizer, V18-V36 1335.80 ECON5V Economizer, V42-V60 1401.12 596
UPFLOW/DOWNFLOW, R410A, AC Nominal Capacity Dimensions (In.) Part No. (Tons) H W L ECD4X1815A 1 1/2 18 5/16 15 5/8 20 5/8 452.16 ECD4X2415A 2 19 9/16 15 5/8 20 5/8 487.36 ECD4X2419A 2 19 9/16 19 1/4 20 5/8 487.36 ECD4X3015A 2 1/2 23 11/16 15 5/8 20 5/8 527.96 ECD4X3019A 2 1/2 23 11/16 19 1/4 20 5/8 527.96 ECD4X3615A 3 25 13/16 15 5/8 20 5/8 574.00 ECD4X3619A 3 25 13/16 19 1/4 20 5/8 574.00 ECD4X3622A 3 25 13/16 22 7/8 20 5/8 574.00 ECD4X4219A 3 1/2 27 9/16 19 1/4 20 5/8 701.24 ECD4X4222A 3 1/2 27 9/16 22 7/8 20 5/8 701.24 ECD4X4224A 3 1/2 27 9/16 24 1/2 20 5/8 701.24 ECD4X4819A 4 33 5/16 19 1/4 20 5/8 755.40 ECD4X4822A 4 27 9/16 22 7/8 20 5/8 755.40 ECD4X4824A 4 27 9/16 24 1/2 20 5/8 755.40 ECD4X6022A 5 33 5/16 22 7/8 20 5/8 869.10 ECD4X6024A 5 33 5/16 24 1/2 20 5/8 869.10 UPFLOW/DOWNFLOW, R410A, AC/HP Nominal Capacity Dimensions (In.) Part No. (Tons) H W L ECD4X1815AC 1 1/2 18 5/16 15 5/8 20 5/8 % ECD4X2415AC 2 19 9/16 15 5/8 20 5/8 % ECD4X2419AC 2 19 9/16 19 1/4 20 5/8 % ECD4X3015AC 2 1/2 23 11/16 15 5/8 20 5/8 % ECD4X3019AC 2 1/2 23 11/16 19 1/4 20 5/8 % ECD4X3615AC 3 25 13/16 15 5/8 20 5/8 % ECD4X3619AC 3 25 13/16 19 1/4 20 5/8 % ECD4X3622AC 3 25 13/16 22 7/8 20 5/8 % ECD4X4219AC 3 1/2 27 9/16 19 1/4 20 5/8 % ECD4X4222AC 3 1/2 27 9/16 22 7/8 20 5/8 % ECD4X4224AC 3 1/2 27 9/16 24 1/2 20 5/8 % ECD4X4819AC 4 33 5/16 19 1/4 20 5/8 % ECD4X4822AC 4 27 9/16 22 7/8 20 5/8 % ECD4X4824AC 4 27 9/16 24 1/2 20 5/8 % ECD4X6022AC 5 33 5/16 22 7/8 20 5/8 % ECD4X6024AC 5 33 5/16 24 1/2 20 5/8 % % Please contact your local Aireco branch for pricing. 597
LIGHT COMMERCIAL 3 PHASE PACKAGED ELECTRIC / ELECTRIC Model Number Guide Residential Packaged Light Commercial Electric / Electric R CE 13 A 36 T 1 A A - Service Level Revision Code SEER 13 Series Nominal Capacity 36-36,000 Btuh (36 through 60) Voltage T = 200-230/60/3 F = 460/60/3 RCE13 Dimensions (in.) Model A B C RCE13-36T-1 32-1/2 46-1/2 46-1/2 RCE13-48T, F-1 RCE13-60T, F-1 34-1/2 55-1/2 50-1/2 Cooling and Heating Performance Model Cooling BTUH SEER RCE13A36T-1 34,000 13.0 RCE13A48T, F-1 46,000 13.0 RCE13A60T, F-1 56,000 13.0 Refrigerant System Environmentally friendly R410A refrigerant External service gauge ports Cabinet Construction Baked on pre-painted steel cabinet finish Blower High-efficiency multispeed motor for wide airflow range Electrical and Physical Data Installation Horizontal or down discharge, duct covers provided Warranty 1 year limited parts warranty 5 year limited compressor warranty Model Voltage Range/HZ/Phase Voltage Range 60 hz RCE13A36T-1 200-230/60/3 187-253 6120.00 RCE13A48T-1 200-230/60/3 187-253 7068.00 RCE13A60T-1 200-230/60/3 187-253 7992.00 RCE13A48F-1 460/60/3 414-506 7272.00 RCE13A60F-1 460/60/3 414-506 8224.00 598
LIGHT COMMERCIAL 3 PHASE PACKAGED GAS / ELECTRIC Model Number Guide Residential Packaged Light Commercial Gas / Electric R GE 13 A 36 T 1 A A - Service Level Revision Code SEER 13 Series Nominal Capacity 36-36,000 Btuh (36 through 60) Voltage T = 200-230/60/3 F = 460/60/3 RGE13 Model Cooling and Heating Performance Cooling Refrigerant System Environmentally friendly R410A refrigerant External service gauge ports Heat Exchanger Aluminized steel tapered S-curve Crimped no weld construction for longer life Cabinet Construction Baked on pre-painted steel cabinet finish Blower High-efficiency multispeed motor for wide airflow range Heating BTUH SEER Input BTUH Efficiency AFUE RGE13A36T-1 34000 13.0 RGE13A48T, F-1 46000 13.0 RGE13A60T, F-1 56000 13.0 75000 100,000 100,000 125,000 100,000 125,000 80% 80% 80% Installation Horizontal or down discharge, duct covers provided Utility connections on right side Controls Solid state integrated blower control board with L.E.D. diagnostics Direct spark ignition Warranty 1 year limited parts warranty 5 year limited compressor warranty 10 year limited heat exchanger warranty Model Electrical and Physical Data Voltage Range/HZ/Phase RGE13A36100T-1 200-230/60/3 6764.00 RGE13A48125T-1 200-230/60/3 7552.00 RGE13A60125T-1 200-230/60/3 8480.00 RGE13A48125F-1 460/60/3 7976.00 RGE13A60125F-1 460/60/3 8720.00 599
Model Number Guide LIGHT COMMERCIAL 3 PHASE PACKAGED HEAT PUMP Residential Packaged Light Commercial Heat Pump R HP 13 A 36 T 1 A A - Service Level Revision Code SEER 13 Series Nominal Capacity 36-36,000 Btuh (24 through 60) Voltage T = 200-230/60/3 F = 460/60/3 RHP13 Refrigerant System Environmentally friendly R410A refrigerant External service gauge Ports Warranty 1 year limited parts warranty 5 year limited compressor warranty Cooling and Heating Performance Model Cooling BTUH SEER Heating 47 BTUH HSPF Cabinet Construction Baked on pre-painted steel cabinet finish Blower High-efficiency multispeed motor for wide airflow range Installation Horizontal or down discharge, duct covers provided Dimensions (in.)50-1/2 Model A B C RHP13-36T-1 32-1/2 46-1/2 46-1/2 Electrical and Physical Data Model Voltage Range/HZ/Phase RHP13A36T-1 200-230/60/3 6640.00 RHP13A36T-1 34,600 13.0 33,600 7.7 RHP13A48T, F-1 46,000 13.0 44,000 7.7 RHP13-48T, F-1 RHP13-60T, F-1 34-1/2 55-1/2 50-1/2 RHP13A48T-1 200-230/60/3 7684.00 RHP13A60T-1 200-230/60/3 8692.00 RHP13A60T, F-1 56,000 13.0 54,000 7.7 RHP13A48F-1 460/60/3 7904.00 RHP13A60F-1 460/60/3 8940.00 600
ZC Z-SERIES ROOFTOP UNITS 60 HZ PACKAGED ELECTRIC / ELECTRIC SUBSECTION NAME Z-Series rooftop units from Allied are the new standard for cost-efficient, reliable rooftop units built for long-lasting performance that can significantly improve indoor environments. Z-Series rooftop units feature: Quick and Easy Retrofit - Fast installation for replacement of many existing rooftop units - fits high volume competitor s roof curbs. R-410A Refrigerant - Environmentally friendly. Scroll Compressors Single-speed scroll compressor is furnished on all models. Eco-last Coil System - Smaller, lighter condenser coil. High Pressure Switch - Protects compressor. Belt Drive Blower Motor - To maximize air performance. Downflow or Horizontal Airflow - Easy field conversion. Two Fork Lift Slots on Three Sides - Easy to pick up and transport units from almost any angle. Corrosion-Resistant Drain Pan - Provides application flexibility, durability, improved serviceability and meets ASHRAE 62.1 requirements for drain pan slope. Warranty Limited five years on compressors. Limited three years on the Eco-last Coil System. Limited one year all other covered components. Compressor Resiliently mounted on rubber grommets for quiet operation. Scroll compressors for high performance, reliability and quiet operation. High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation. Filter/Drier High capacity filter/drier protects the system from dirt and moisture. Condenser coil features lightweight, all aluminum brazed fin construction. Eco-last Coil System Condenser coil features lightweight, all aluminum brazed fin construction. Air-Flow Choice Units are shipped in downflow (vertical) configuration, can be field converted to horizontal air flow configuration without the need of a kit. Call your local Aireco Branch for pricing. 601
ZH Z-SERIES ROOFTOP UNITS 60 HZ PACKAGED ELECTRIC / ELECTRIC Z-Series rooftop units from Allied are the new standard for cost-efficient, reliable rooftop units built for long-lasting performance that can significantly improve indoor environments. Z-Series rooftop units feature: Quick and Easy Retrofit - Fast installation for replacement of many existing rooftop units - fits high volume competitor s roof curbs R-410A Refrigerant - Environmentally friendly Scroll Compressors Single-speed scroll compressor is furnished on all models. High Pressure Switch - Protects compressor. Belt Drive Blower Motor - To maximize air performance. Downflow or Horizontal Airflow - Easy field conversion. Two Fork Lift Slots on Three Sides - Easy to pick up and transport units from almost any angle. Corrosion-Resistant Drain Pan - Provides application flexibility, durability, improved serviceability and meets ASHRAE 62.1 requirements for drain pan slope. Thermostatic Expansion Valve - Provides peak heating performance across the entire application range. Warranty Specifications Limited five years on compressors. Limited one year all other covered components. Nominal Cooling Cooling Electrical Dimensions (inches) Model Capacity Tons Btuh SEER 60 Hz H x W x L ZCA036S4B 3 Ton 36,100 13.00 208/230V 1 Phase 36-7/8 x 47-1/4 x 75-7/8 % ZCA048S4B 4 Ton 47,000 13.00 208/230V 1 Phase 36-7/8 x 47-1/4 x 75-7/8 % ZCA060S4B 5 Ton 59,700 13.00 208/230V 1 Phase 36-7/8 x 47-1/4 x 75-7/8 % 602
ZH Z-SERIES ROOFTOP UNITS 60 HZ PACKAGED ELECTRIC / ELECTRIC SUBSECTION NAME Z-Series rooftop units from Allied are the new standard for cost-efficient, reliable rooftop units built for long-lasting performance that can significantly improve indoor environments. Z-Series rooftop units feature: Quick and Easy Retrofit - Fast installation for replacement of many existing rooftop units - fits high volume competitor s roof curbs R-410A Refrigerant - Environmentally friendly Scroll Compressors Single-speed scroll compressor is furnished on all models. High Pressure Switch - Protects compressor. Belt Drive Blower Motor - To maximize air performance. Downflow or Horizontal Airflow - Easy field conversion. Two Fork Lift Slots on Three Sides - Easy to pick up and transport units from almost any angle. Corrosion-Resistant Drain Pan - Provides application flexibility, durability, improved serviceability and meets ASHRAE 62.1 requirements for drain pan slope. Thermostatic Expansion Valve - Provides peak heating performance across the entire application range. Warranty Specifications Limited five years on compressors. Limited one year all other covered components. Nominal Cooling Cooling Electrical Dimensions (inches) Model Capacity Tons Btuh SEER 60 Hz H x W x L ZCA036S4B 3 Ton 36,100 13.00 208/230V 1 Phase 36-7/8 x 47-1/4 x 75-7/8 % ZCA048S4B 4 Ton 47,000 13.00 208/230V 1 Phase 36-7/8 x 47-1/4 x 75-7/8 % ZCA060S4B 5 Ton 59,700 13.00 208/230V 1 Phase 36-7/8 x 47-1/4 x 75-7/8 % 603
KG K-SERIES ROOFTOP UNITS 60 HZ PACKAGED GAS ELECTRIC K-Series rooftop units from Allied are the new standard for reliable, efficient rooftop units built for long-lasting performance that can significantly improve indoor environments. K-Series rooftop units feature: Aluminized Steel Heat Exchanger With Inshot Burners Life-cycle tested. R-410A Refrigerant Environmentally friendly. Scroll Compressors Single-speed scroll compressors are furnished on all models. Eco-last Coil System Smaller, lighter condenser coil. High-Pressure Switches Protect compressor. Isolated Compressor Compartment Allows performance check during normal compressor operation without disrupting airflow. Specifications Model Nominal Tonnage Efficiency Type Blower Type Btuh Cooling EER (Btuh/Watt) Electrical Gas Heating Performance Input-Btuh First Stage Dimensions (inches) Standard Medium High H W L KGA092S4B 7.5 Ton Standard Constant Air Volume (CAV) 88,200 11.0 208/230V, 460V or 575V - 60 Hz - 3 phase 84,500 117,000 156,000 46-7/8 (1191) 60-1/8 101-1/4 (1527) (2572) 14200.00 KGA102S4B 8.5 Ton Standard Constant Air Volume (CAV) 99,600 11.0 208/230V, 460V or 575V - 60 Hz - 3 phase 84,500 117,000 156,000 46-7/8 (1191) 60-1/8 101-1/4 (1527) (2572) 15388.00 KGA120S4B 10 Ton Standard Constant Air Volume (CAV) 118,400 11.0 208/230V, 460V or 575V - 60 Hz - 3 phase 84,500 117,000 156,000 46-7/8 (1191) 60-1/8 101-1/4 (1527) (2572) 15452.00 KGA150S4B 12.5 Ton Standard Constant Air Volume (CAV) 142,600 11.0 208/230V, 460V or 575V - 60 Hz - 3 phase 84,500 117,000 156,000 46-7/8 (1191) 60-1/8 101-1/4 (1527) (2572) 18308.00 604
KG K-SERIES ROOFTOP UNITS 60 HZ PACKAGED GAS ELECTRIC SUBSECTION NAME K Series rooftop units from Allied are the new standard for reliable, efficient rooftop units built for long-lasting performance that can significantly improve indoor environments. K Series rooftop units feature: R-410A Refrigerant Environmentally friendly Scroll Compressors Single-speed scroll compressors are furnished on all models. Eco-last Coil System (090 Models Only) Smaller, lighter condenser coil. High Pressure Switches Protect compressor. Isolated Compressor Compartment Allows performance check during normal compressor operation without disrupting airflow. Direct or Belt Drive Blower Motors Direct drive (024, 030, 036, 048 and 060 models). Belt drive motors (036, 048, 060, 072 and 090 models) to maximize air performance. Independent Motor Mounts Allows for easy and efficient service access without removing the top panel. Downflow or Horizontal Airflow Easy field conversion. Two Fork Lift Slots on Three Sides Easy to pick up and transport units from almost any angle. Corrosion-Resistant Removable, Reversible Drain Pan Provides application flexibility, durability and improved serviceability. Thermostatic Expansion Valves (024, 036, 048, 060 and 072 models) Provide peak cooling performance across the entire application range. Warranty Limited ten years aluminized heat exchanger, limited fifteen years optional stainless steel heat exchanger. Limited five years on compressors. Limited three years on the Eco-last Coil System. Limited one year all other covered components. 605
PACKAGED GAS ELECTRIC Model Nominal Efficiency Tonnage Type Cooling Heating Btuh Btuh KGA024S4D 2 Ton Standard 24,400 13 Electrical 208/230V 60 Hz - 1 phase Specifications Gas Heat Thermal Efficiency Dimensions (inches) Input Btuh 1st Stage H W L 65,000 80 35-3/8 (899) 024 thru 060 47 (1194) 85-1/4 (2165) 024 thru 072 6928.00 43-3/8 (1102) 072 / 090 98-1/4 (2496) 090 KGA030S4D 2.5 Ton Standard 29,800 13 208/230V 60 Hz - 1 phase 65,000 80 35-3/8 (899) 024 thru 060 47 (1194) 85-1/4 (2165) 024 thru 072 7036.00 43-3/8 (1102) 072 / 090 98-1/4 (2496) 090 KGA036S4D 3 Ton Standard 37,500 13 208/230V 60 Hz - 1 phase 65,000 80 35-3/8 (899) 024 thru 060 47 (1194) 85-1/4 (2165) 024 thru 072 7072.00 43-3/8 (1102) 072 / 090 98-1/4 (2496) 090 KGA048S4D 4 Ton Standard 50,000 13 208/230V 60 Hz - 1 phase 65,000 80 35-3/8 (899) 024 thru 060 47 (1194) 85-1/4 (2165) 024 thru 072 7980.00 43-3/8 (1102) 072 / 090 98-1/4 (2496) 090 KGA060S4D 5 Ton Standard 61,800 13 208/230V 60 Hz - 1 phase 65,000 80 35-3/8 (899) 024 thru 060 47 (1194) 85-1/4 (2165) 024 thru 072 8708.00 43-3/8 (1102) 072 / 090 98-1/4 (2496) 090 We represent all major manufacturers, the latest technologies, and hardest-to-find parts and supplies. 606
KC K-SERIES ROOFTOP UNITS 60 HZ PACKAGED ELECTRIC / ELECTRIC SUBSECTION NAME K Series rooftop units from Allied are the new standard for reliable, efficient rooftop units built for long-lasting performance that can significantly improve indoor environments. K Series rooftop units feature: R-410A Refrigerant Environmentally friendly. Scroll Compressors Single-speed scroll compressors are furnished on all models. Eco-last Coil System (090 Models Only) Smaller, lighter condenser coil. High-Pressure Switches Protect compressor. Isolated Compressor Compartment Allows performance check during normal compressor operation without disrupting airflow. Direct or Belt Drive Blower Motors Direct drive (024, 030, 036, 048 and 060 models). Belt drive motors (036, 048, 060, 072 and 090 models) to maximize air performance. Independent Motor Mounts Allows for easy and efficient service access without removing the top panel. Downflow or Horizontal Airflow Easy field conversion. Two Fork Lift Slots on Three Sides Easy to pick up and transport units from almost any angle. Corrosion-Resistant Removable, Reversible Drain Pan Provides application flexibility, durability and improved serviceability. Thermostatic Expansion Valves (024, 036, 048, 060 and 072 models) Provide peak cooling performance across the entire application range. Warranty Limited five years on compressors. Limited three years on the Eco-last Coil System. Limited one year all other covered components. AIR Specifications Nominal Cooling Dimensions (inches) Model Electrical Tonnage Btuh SEER (Btuh/Watt) H W L KCA024S4D 2 Ton 24,400 13 208/230V 60 Hz 1 phase 35-3/8 (899) 024 thru 060 85-1/4 (2165) 024 thru 072 47 (1194) 43-3/8 (1102) 072 / 090 98-1/4 (2496) 090 KCA030S4D 2.5 Ton 29,800 13 208/230V 60 Hz 1 phase 35-3/8 (899) 024 thru 060 85-1/4 (2165) 024 thru 072 47 (1194) 43-3/8 (1102) 072 / 090 98-1/4 (2496) 090 KCA036S4D 3 Ton 37,500 13 208/230V 60 Hz 1 phase 35-3/8 (899) 024 thru 060 85-1/4 (2165) 024 thru 072 47 (1194) 43-3/8 (1102) 072 / 090 98-1/4 (2496) 090 KCA048S4D 4 Ton 50,000 13 208/230V 60 Hz 1 phase 35-3/8 (899) 024 thru 060 85-1/4 (2165) 024 thru 072 47 (1194) 43-3/8 (1102) 072 / 090 98-1/4 (2496) 090 KCA060S4D 5 Ton 61,800 13 208/230V 60 Hz 1 phase 35-3/8 (899) 024 thru 060 85-1/4 (2165) 024 thru 072 47 (1194) 43-3/8 (1102) 072 / 090 98-1/4 (2496) 090 5784.00 5920.00 6076.00 7648.00 7464.00 607
KC K-SERIES ROOFTOP UNITS 60 HZ PACKAGED ELECTRIC / ELECTRIC AIR K-Series rooftop units from Allied are the new standard for reliable, efficient rooftop units built for long-lasting performance that can significantly improve indoor environments. K-Series rooftop units feature: R-410A Refrigerant Environmentally friendly Scroll Compressors Single-speed scroll compressors are furnished on all models. Eco-last Coil System - Smaller, lighter condenser coil. High-Pressure Switches Protect compressor. Isolated Compressor Compartment Allows performance check during normal compressor operation without disrupting airflow. Independent Outdoor Fan Motor Mounts Allows for easy and efficient service access without removing the top panel. Constant Air Volume (CAV) or Single Zone VAV Supply Fan Supply Air Blower Option Allows constant or multi-staged air delivery. Downflow or Horizontal Airflow Easy field conversion. Two Fork Lift Slots on Three Sides Easy to pick up and transport units from almost any angle. Corrosion-Resistant Removable, Reversible Drain Pan Provides application flexibility, durability and improved serviceability. Thermostatic Expansion Valves Provide peak cooling performance across the entire application range. MERV 8 or MERV 13 Filters Available as field installed option, provide an enhanced level of indoor air quality, and can help the building qualify for additional LEED credits. Warranty Limited five years on compressors. Limited three years on the Eco-last Coil System. Limited one year all other covered components. Model Nominal Tonnage Specifications Cooling Dimensions (inches) IEER Electrical Btuh (Btuh/Watt) H W L KCA092S4B 7.5 Ton 88,200 12 208/230V, 460V or 575V - 60 hertz - 3 phase 46-7/8(1191) 60-1/8(1527) 101-1/4(2572) 12600.00 KCA102S4B 8.5 Ton 99,600 12 208/230V, 460V or 575V - 60 hertz - 3 phase 46-7/8(1191) 60-1/8(1527) 101-1/4(2572) 13604.00 KCA120S4B 10 Ton 118,400 12 208/230V, 460V or 575V - 60 hertz - 3 phase 46-7/8(1191) 60-1/8(1527) 101-1/4(2572) 15452.00 KCA150S4B 12.5 Ton 142,600 11.6 208/230V, 460V or 575V - 60 hertz - 3 phase 46-7/8(1191) 60-1/8(1527) 101-1/4(2572) 18308.00 608
HEAT PUMP OUTDOOR UNITS, SPLIT SYSTEM UNITS SPLIT SYSTEM UNITS R-410A - 60 HZ SUBSECTION NAME Equipment Warranty Compressor - limited warranty for five years in nonresidential applications. All other covered components - one year in nonresidential applications. Refer to Equipment Limited Warranty certificate for specific details. Applications Heat pumps are available in 7.5 and 10 ton nominal sizes. Matching air handlers provide a wide range of cooling capacities and applications. See AHRI Ratings tables. See Air Handlers sections for data. Units shipped completely factory assembled, piped, and wired. Each unit is test operated at the factory insuring proper operation. Installer must set heat pump, connect refrigerant lines, add refrigerant charge and make electrical connections to complete job. Approvals All units tested in our Research Laboratory environmental test room or ETL certified environmental testing facility. Certified in accordance with the ULE certification program, which is based on AHRI Standard 340/360-2007. Sound tested in reverberant sound test room in accordance with test conditions included in AHRI Standard 270-95 or 370-2001. Units and components within are bonded for grounding to meet safety standards for servicing required by UL, ULC, NEC and CEC. All units are ETL listed. ISO 9001 Registered Manufacturing Quality System. 609
HEAT PUMP OUTDOOR UNITS, SPLIT SYSTEM UNITS 610
HEAT PUMP OUTDOOR UNITS, SPLIT SYSTEM UNITS 611
AIR HANDLERS TAA SPLIT SYSTEM UNITS UPFLOW / HORIZONTAL R-410A - 60 HZ All covered components have a limited warranty for one year. Units manufactured in accordance with ISO 9001 quality standards. Provides installation versatility and maximum efficiency in cooling performance, air handling and filtering in cooling or heat pump applications. Convertible upflow or horizontal design. Equipped with single-circuit (072) or dualcircuit (090-240) indoor coils, suitable for application with 6- to 20-ton TSA air conditioners or 7.5- to 10-ton TPA heat pump outdoor units. Coils on 090-240 models are face split with separate circuits; each circuit has its own expansion valve. Flared tubing connections and silver soldering provide tight, leak-proof joints. Long-life copper tubing is corrosionresistant and easy-to-field service. For use with R-410A systems. 090 and 120 models have internal check valves for use with heat pump systems. Refrigerant line inlets (knockouts) are provided on both sides of the cabinet. 2-inch thick, throwaway fiberglass media filters are furnished as standard. Filter rack design permits quick and easy removal of filters for servicing. Model Nominal Tonnage 072-090-120-150 models are equipped with a single blower wheel; 180 and 240 models have dual blower wheels. Cabinet is constructed of heavy-gauge, galvanized steel. Drain pan is removable from either side in both horizontal and vertical applications. Field-installed electric heaters are available in several kw sizes; see Electric Heat Data table. Specifications Dimensions (inches) H W L TAA072S4S 6 54-3/4 (1391) 29-1/2 (749) 51-1/4 (1302) 5236.00 TAA090S4D 7.5 54-3/4 (1391) 29-1/2 (749) 51-1/4 (1302) 5424.00 TAA120S4D 10 54 3/4 (1391) 29 1/2 (749) 67 1/4 (1708) 6500.00 TAA150S4D 12.5 54 3/4 (1391) 29 1/2 (749) 67 1/4 (1708) 7004.00 TAA180S4D 15 54 3/4 (1391) 29 1/2 (749) 96 1/4 (2445) 10168.00 TAA240S4D 20 54 3/4 (1391) 29 1/2 (749) 96 1/4 (2445) 13672.00 612