Product overview Suction Guns, suction machines, Vac-Blast Cleaners micro-cleaning for your products 3300_EN_20141020_Sauggeraete_Gesamtprogramm TiS
Intelligent air utilisation Compressed air passes a ring nozzle thus creating a vacuum within the suction tube. This vacuum systematically sucks off dry and slightly oily particles, abrasions and short chips instead of redistributing them via an uncontrollable compressed air blast.
Contents Seite Suction Gun SP 14 4 The Suction Gun SP 14 systematically sucks off abrasions, contaminating particles and short chips at assembly work stations and workshops. Suction nozzle FD 10/FD 14 6 These nozzles provide a constant suction air flow at machines, installations and production lines. Vac-Blast Cleaner BS 14/MS 14 8 The Vac-Blast Cleaner removes and effectively sucks off virtually inaccessible particles from recesses and bore holes. Aerosol Suction Cleaner MS 15 10 The Aerosol Suction Cleaner systematically sucks off moist particles such as short metal chips during thread cutting. Options / accessories 12 The above machines may be equipped with brushes, nozzles, filters and debris containers. They may thus adapt to a great variety of different applications. www.wandres.com 3
Suction Gun SP 14 Brief description The Suction Gun SP 14 is ideal to remove non-toxic particles and short chips with a precise suction mechanism. It functions according to the Venturi principle: Compressed air passes a ring nozzle thus creating a vacuum within the suction tube. The incoming air conducts transports the particles and chips towards the exhaust air hose. Suction performance may be regulated infinitely via a hand lever. Different brushes, nozzles and filters are available as an option. The Suction Gun may be used for a wide variety of different industry applications. ø 20 Exhaust air Suction tube Technical data Compressed air Connection NW 10 mm; 6 bar Consumption 420 Nl/min Compressed air Category 5 according to DIN ISO 8573-1 Particles Max. particle size 40 μm, Max. particle density 10 mg/m 3 Water Pressure condensation point 7º C Water content: 7800 mg/m 3 Suction capacity Vacuum -350 mbar (35%) Suction volume flow 500 Nl/min Acoustic emission 80 db (A) Weight 460 g Particle diameter Max. 9.5 mm with round suction tube Max 3 mm with flat suction tube or flat nozzle/brush Technical information is subject to changes. Ø 10 Compressed air 4 www.wandres.com
Order code For dry or moist particles, e.g. non-toxic dust particles or short chips during thread cutting ø 10 014-212 Suction Gun SP 14 Suction tube 14 mm Connection for exhaust air 20 mm For dry, non-toxic particles and short metal chips ø 20 ø 10 014-211 Suction Gun SP 14 WS with felt filter bag Suction tube Ø 14 mm including - Felt filter bag with screw cap - 0.3 m anti-static hose Ø 20 mm For dry, non-toxic particles and short metal chips ø 20 014-221 Suction Gun SP 14 MB 1.5 with 1.5 litre container and felt filter bag Suction tube Ø 14 mm ø 10 including - 1.5 litre container with screw cap, support with mounting bracket to fasten to wall - 3 m compressed air hose Ø 10 mm - 3 m anti-static hose Ø 20 mm For moist particles, e.g. short metal chips during thread cutting ø 20 014-231 Suction Gun SP 14 MB 1.5 with 1.5 litre container and aerosol filter Suction tube Ø 14 mm ø 10 including - 1,5 litre container with two aerosol filters - 3 m compressed air hose Ø 10 mm - 3 m anti-static hose Ø 20 mm For moist particles, e.g. short metal chips during thread cutting ø 10 ø 20 014-251 Suction Gun SP 14 MB 30 with 30 litre container and two aerosol filters Suction tube Ø 14 mm including - 30 litre container with two aerosol filters - 3 m compressed air hose Ø 10 mm - 3 m anti-static hose Ø 20 mm www.wandres.com 5
Suction nozzle FD.. Brief description Technical data Exhaust air The suction nozzle FD.. has been designed for the integration into machines, complete installations and production lines. It may be run continuously without any maintenance works. There are two bore holes to mount the nozzle to existing appliances. You may remove rubbed-off parts, short chips or dust particles. The nozzle functions according to the Venturi principle: Compressed air passes a ring nozzle thus creating a vacuum within the suction tube. The incoming air transports the particles and chips towards the exhaust air hose. Two types of this suction nozzle are available. FD 10 with a suction tube diameter of 10 mm and FD 14 with a suction tube of 14 mm. The latter may also be equipped with a variety of brushes and nozzles that may be put onto the suction tube. ø 20 ø 5,5 30 ca. 105 G 1/4" compressed air connection Suction tube ø a Compressed air Connection Consumption Compressed air Particles Water 1/4"; 6 bar FD 10: 290 Nl/min FD 14: 440 Nl/min Category 5 according to DIN ISO 8573-1 Max. particle size 40 μm, Max. particle density 10 mg/m 3 Pressure condensation point 7º C Water content: 7800 mg/m 3 Oil Residual oil 25 mg/m 3 Suction capacity Vacuum -350 mbar (35%) Suction volume flow FD 10: 250 Nl/min FD 14: 500 Nl/min Acoustic emission FD 10: 79 db (A) FD 14: 83 db (A) Weight FD 10: 140 g FD 14: 160 g Suction tube diameter (ø a) FD 10: 10 mm for max. particle size 7 mm FD 14: 14 mm for max. particle size 9.5 mm Technical information is subject to changes. 6 www.wandres.com
Order code For dry or moist particles, e.g. rubbed-off parts, short chips or dust particles ø 20 ø 10 014-010 Suction Gun FD 10 Suction tube 10 mm for parts with max. size of 7 mm - Connection for exhaust air Ø 20 mm - Compressed air connection for compressed air hose Ø 8 mm - Two mounting holes Ø 5.5 mm ca. 105 G 1/4" ø 20 014-020 Suction Gun FD 14 Suction tube 14 mm for parts with max. size of 9.5 mm - Connection for exhaust air Ø 20 mm - Compressed air connection for compressed air hose Ø 8 mm - Two mounting holes Ø 5.5 mm ca. 105 G 1/4" www.wandres.com 7
Vac-Blast Cleaner BS 14../MS 14.. Brief description Technical data The Vac-Blast Cleaner BS 14/ MS 14 is ideal to remove non-toxic particles and short chips with a precise suction mechanism. The suction air flow functions according to the Venturi principle: Compressed air passes a ring nozzle thus creating a vacuum within the suction tube. The incoming air transports the particles and chips towards the exhaust air hose and the debris container. If you press the button at the vac-blast unit, an additional compressed air jet will be activated. This jet will be able to loosen persistent contaminations on surfaces or stuck particles within blind holes. Different brushes, nozzles and filters are available as an option. The Vac-Blast Cleaner may be used for a wide variety of different industry applications including Clean Room applications. Suction hose Ø 15 Compressed air hose Ø 3 Button to activate compressed air jet Suction air Compressed air Compressed air Connection 1/4"; 6 bar Consumption suction mode only BS 14: 420 Nl/min MS 14: 310 Nl/min + blowing mode BS 14: 460 Nl/min MS 14: 350 Nl/min Compressed air Category 5 according to DIN ISO 8573-1 Particles Max. particle size 40 μm, Max. particle density 10 mg/m 3 Water Pressure condensation point 7º C Water content: 7800 mg/m 3 Oil Residual oil 25 mg/m 3 Suction capacity Vacuum BS 14: -300 mbar (30%) MS 14: -290 mbar (29%) Suction volume flow BS 14: 380 Nl/min MS 14: 230 Nl/min Acoustic emission suction mode only BS 14: 75 db (A), MS 14: 62 db (A) + blowing mode BS 14: 77 db (A), MS 14: 72 db (A) Capacity debris container BS 14: 1.5 litres, MS 14: 2 litres Particle diameter Max. 7 mm Max 3 mm with flat nozzle (only suction mode) Technical information is subject to changes. 8 www.wandres.com
Suction hose Compressed air hose Order code For persistent or adhesive dry, non-toxic particles and short metal chips 014-602 Vac-Blast Cleaner BS 14 MB 1.5 with 1.5 litre container and felt filter bag Suction tube Ø 14 mm Vac-Blast nozzle FD 14/1 with ball valve Compressed air supply (Ø 8 mm) including - 1.5 litre container with felt filter bag to be screwed on top and support with mounting bracket to fasten to wall - 1.5 m off anti-static exhaust air hose Ø 20 mm - vac-blast unit with 1.5 m off suction hose Ø 15 mm and 1.5 m off compressed air hose Ø 3 mm Suction hose Compressed air hose For persistent or adhesive moist particles e.g. short metal chips in blind holes 014-603 Vac-Blast Cleaner BS 14 MB 1.5 with 1.5 litre container and aerosol filter Suction tube Ø 14 mm Vac-Blast nozzle FD 14/1 with ball valve Compressed air supply (Ø 8 mm) including - 1.5 litre container with aerosol filter to be screwed on top and support with mounting bracket to fasten to wall - 1.5 m off anti-static exhaust air hose Ø 20 mm - vac-blast unit with 1.5 m off suction hose Ø 15 mm and 1.5 m off compressed air hose Ø 3 mm For persistent or adhesive moist particles e.g. short metal chips in blind holes Suction hose Compressed air hose 014-806 Vac-Blast Cleaner MS 14 MB 2 with 2 litre container and aerosol filter Suction tube Ø 14 mm including - 2 litre container with filter housing on top including 1 aerosol filter - 1.6 m off anti-static exhaust air hose Ø 20 mm - vac-blast unit with 1.6 m off suction hose Ø 15 mm and 1.6 m off compressed air hose Ø 3 mm www.wandres.com 9
Aerosol Suction Cleaner MS 15 MB 2 Brief description The Aerosol Suction Cleaner MS 15 MB 2 is ideal to remove moist particles, e.g. short metal chips during thread cutting. The sucking effect of the Aerosol Suction Cleaner MS 15 MB 2 is brought about by changing the position of a ball valve at the compressed air supply line. The suction air flow functions according to the Venturi principle: Compressed air passes a ring nozzle thus creating a vacuum within the suction tube. The incoming air transports the particles and chips via the exhaust air hose to the debris container. There is an aluminium filter housing on top of the debris container. It contains three fine filters for the separation of aerosols. Different brushes, nozzles and filters are available as an option. The Aerosol Suction Cleaner may be used for a wide variety of different industry applications. Technical data Compressed air Connection Consumption Compressed air Particles Water 1/4"; 6 bar 300 Nl/min Category 5 according to DIN ISO 8573-1 Max. particle size 40 μm, Max. particle density 10 mg/m 3 Pressure condensation point 7º C Water content: 7800 mg/m 3 Oil Residual oil 25 mg/m 3 Suction capacity Vacuum -340 mbar (34%) Suction volume flow 250 Nl/min Acoustic emission 68 db (A) Capacity debris container 2 litres Particle diameter Max. 7 mm Max. 3 mm with flat nozzle Technical information is subject to changes. 10 www.wandres.com
Order code For moist particles e.g. short metal chips during thread cutting 015-806 Aerosol-Sauger MS 15 MB 2 with 2 litre container and three aerosol filters - Suction tube Ø 14 mm including - 2 litre container with filter housing on top containing 3 aerosol filters - Suction unit with 1.6 m off suction hose Ø 15 mm 600 ø 125 76 500 3 aerosol filters Filter housing made of anodized aluminium 200 Suction hose Ball valve 1/4" compressed air connection (6 bar) Max. level for debris (2 litre) Transparent container 0 ø 160 www.wandres.com 11
The machines may be used in a great variety of applications An assortment of brushes and nozzles provide effective adaptation to the subject surface. Further equipment is available making the daily job with the Vac-Blast Cleaner even more agreeable.
Options / accessories Page Brushes Round brushes are suitable both for the suction and the blowing mode. 14 Nozzles Flat nozzles may only be used for the suction mode. Exchange nozzles may be used for either the suction or for the blowing mode. 15 Brush and nozzle sets Flat nozzles and flat brushes may only be used for the suction mode. Round brushes may be used for either the suction or the blowing mode. 16 Filter Filters are suitable for dry and moist, non-toxic particles and short metal chips. 17 Hoses / other spare parts List of spares for Suction Guns, Vac-Blast Cleaners, the Aerosol Suction Cleaner and suction nozzles 18 Containers / accessories List of containers and other accessories for Suction Guns, Vac-Blast Cleaners and the Aerosol Suction Cleaner 19 www.wandres.com 13
Brushes Order code Round brushes may be used either in the suction or the blowing mode. 8 ø 22 41 06 051 Round brush Ø 22 mm with soft bristles White polyamide bristles Bristle diameter 0.1 mm Bristle length 8 mm 8 ø 22 41 06 052 Round brush Ø 22 mm with hard bristles Black polyamide bristles Bristle diameter 0.2 mm Bristle length 8 mm 8 ø 40 41 06 015 Round brush Ø 40 mm with soft bristles Black polyamide bristles Bristle diameter 0.1 mm Bristle length 10 mm 20 ø 50 41 06 033 Double round brush Ø 50 mm with soft bristles Black polyamide bristles Bristle diameter 0.1 mm 8 ø 24 Bristle length: outer bristle ring 20 mm inner bristle ring 10 mm 41 06 053 Round brush Ø 24 mm with soft bristles White polyamide bristles pointing outwards Bristle diameter 0.1 mm Bristle length 8 mm 8 ø 24 41 06 054 Round brush Ø 24 mm with hard bristles Black polyamide bristles pointing outwards Bristle diameter 0.2 mm Bristle length 8 mm 14 www.wandres.com
Nozzles Order code Flat nozzles may only be used in the suction mode. 10 26 010 Flat nozzle without bristles 70 70 10 10 26 014 Flat nozzle with one row of hard bristles Black polyamide bristles Bristle diameter 0.2 mm Bristle length 10 mm 70 10 10 26 012 Flat brush with two rows of soft bristles Black polyamide bristles Bristle diameter 0.1 mm Bristle length 10 mm 120 10 04 014 Exchange nozzle with round suction tube made out of nickeled brass. Suction tube length 120 mm Suitable for Suction Nozzle FD 14 and Suction Gun SP 14 120 50 19 10 04 015 Exchange nozzle with flat suction tube made out of nickeled brass. Suction tube length 120 mm Suitable for Suction Nozzle FD 14 and Suction Gun SP 14 120 ø 10 10 03 015 Exchange nozzle with round suction tube made out of stainless steel Nominal width 10 mm Suction tube length 120 mm Suitable for Suction Nozzle FD 10 ø 10 120 50 19 10 03 016 Exchange nozzle with flat suction tube made out of stainless steel Nominal width 10 mm Suction tube length 120 mm Suitable for Suction Nozzle FD 10 www.wandres.com 15
Brush and nozzle sets Order code Flat nozzles and flat brushes may only be used in the suction mode. 014-004 Four-piece set of brushes and nozzles, containing: - Round brush Ø 40 mm with soft bristles (41 06 015) - Flat nozzle without bristles (10 26 010) - Flat brush with one row of hard bristles (10 26 014)) - Flat brush with two rows of soft bristles (10 26 012) 014-005 Seven-piece set of brushes and nozzles, containing: - Round brush Ø 22 mm with soft bristles (41 06 051) - Round brush Ø 22 mm with hard bristles (41 06 052) - Round brush Ø 40 mm with soft bristlesn (41 06 015) - Doppel-Round brush Ø 50 mm with soft bristles ( 41 06 033) - Flat nozzle without bristles (10 26 010) - Flat brush with one row of hard bristles (10 26 014)) - Flat brush with two rows of soft bristles (10 26 012) Round brushes may be used either in the suction or in the blowing mode. 014-006 Four-piece set of brushes, containing: - Round brush Ø 22 mm with soft bristles (41 06 051) - Round brush Ø 22 mm with hard bristles (41 06 052) - Round brush Ø 40 mm with soft bristlesn (41 06 015) - Double round brush Ø 50 mm with soft bristles (41 06 033) 16 www.wandres.com
Filters For dry, non-toxic particles and short metal chips 300 ø 20 300 Order code 11 01 001 Felt filter bag with screw lid and 0.3 m off anti-static suction hose Ø 20 mm For dry, non-toxic particles and short metal chips 170 91 06 038 Felt filter bag to be screwed onto a 1.5 litre container For moist particles e.g. short metal chips after thread cutting Note: The Aerosol Suction Cleaner MS 15 MB 2 has three filter inserts. To replace the whole filter system you need to order three times part no. 91 06 159 91 06 159 Filter insert for separation of aerosols - for Suction Gun SP 14 with container and aerosol housing - for Vac-Blast Cleaner BS 14 MB 1.5 with aerosol housing - for Vac-Blast Cleaner MS 14 MB 2 - for Aerosol Suction Cleaner MS 15 MB 2 11 01 007 Replacement set containing filter insert and housing for separation of aerosols The set may be screwed on top of container for - Suction Gun SP 14 und - Vac-Blast Cleaner BS 14 MB 1.5 www.wandres.com 17
Hoses / other spare parts Order code For Vac-Blast Cleaner BS 14 MB 1.5 and Vac-Blast Cleaner MS 14 MB 2 For Suction Nozzles FD 14 and FD 10, Vac-Blast Cleaners BS 14 MB 1.5 and MS 14 MB 2 as well as for Aerosol Suction Cleaner MS 15 MB 2 For Suction Gun SP 14 91 03 101 Compressed air hose Ø 3 mm Black pneumatic hose made out of polyurethane. Please state desired length in metres in your order. 91 03 043 Compressed air hose Ø 8 mm Black pneumatic hose made out of polyurethane. Please state desired length in metres in your order. 91 03 021 Compressed air hose Ø 10 mm Black pneumatic spiral coiled hose made out of polyurethane. Please state desired length in metres in your order. For Vac-Blast Cleaners BS 14 MB 1.5 and MS 14 MB 2 as well as for Aerosol Suction Cleaner MS 15 MB 2 For Suction Nozzles FD 14 and FD 10 and Vac-Blast Cleaners BS 14 MB 1.5 91 03 266 Suction hose Ø 15 mm Black pneumatic spiral coiled hose made out of polyurethane. Please state desired length in metres in your order. 91 03 009 Exhaust air hose Ø 20 mm Black pneumatic spiral coiled hose made out of polyurethane. Please state desired length in metres in your order For Aerosol Suction Cleaner MS 15 MB 2 015-804 Suction unit including 1.6 m off suction hose Ø 15 mm and plug coupling For Vac-Blast Cleaner BS 14 MB 1.5 014-808 Vac-Blast unit including 1.5 m off suction hose Ø 15 mm and 1.5 m off compressed air hose Ø 3 mm For Vac-Blast Cleaner MS 14 MB 2 014-803 Vac-Blast unit including 1.6 m off suction hose Ø 15 mm and 1.6 m off compressed air hose Ø 3 mm For Vac-Blast Cleaner BS 14 MB 1.5 Ø 8 (compressed air) Ø 20 (exhaust air) 014-030 Vac-Blast Nozzle FD 14/1 with ball valve for particles with diameters up to 9.5 mm and 2 mounting holes Ø 5.5 mm Ø 3 (compressed air) Ø 15 (incoming air) 18 www.wandres.com
Containers / Accessories Order code For Suction Gun SP 14 and Vac-Blast Cleaner BS 14 MB 1.5 210 105 91 50 200 1.5 litre container Plastic container with a capacity of 1.5 litres. At the side, there is a connection for a suction hose Ø 20 mm. There is a screw connection on top of the container to mount either a felt filter bag or an aerosol filter. 12 01 010 Support for 1.5 litre container 115 105 With mounting bracket to fasten container to wall For Aerosol Suction Cleaner MS 15 MB 2 and Vac-Blast Cleaner MS 14 MB 2 200 ø 160 20 24 011 2 litre container Transparent plastic container with a capacity of 2 litres For Suction Gun SP 14 MB 30 ø 20 ø 35 91 50 302 30 litre container with one hose connection and two aerosol filters ø 255 Plastic container with a capacity of 30 litres. Screw lid with connection for a suction hose Ø 20 mm and thread for two aerosol filters 500 For Vac-Blast Cleaner BS 14 MB 1.5 and MS 14 MB 2 ➁ ➂ ➀ 10 36 060 Vac-Blast mounting ➀ ➁ ➂ Support for vac-blast handle for continuous operations Drill hole for round rod Ø 14 mm Fix with M 6 headless pin Headless pin M 6 x 5 locks blowing mode in place for continuous operations For Vac-Blast Cleaner BS 14 MB 1.5 and MS 14 MB 2 as well as for Aerosol Suction Cleaner MS 15 MB 2 91 02 179 Foot pedal 1/4" to regulate compressed air supply, with connection for compressed air hose Ø 8 mm www.wandres.com 19
Wandres GmbH micro-cleaning Dorfstr. 12 D-79256 Buchenbach Germany Tel. + 49 (0)7661-9330-0 Fax + 49 (0)7661-9330-30 E-Mail: sales@wandres.com www.wandres.com micro-cleaning for your products