HP WH SERIES HEAT PUMP WATER HEATER 200l 300l HP200M1, HP250M1 / HP200M3, HP250M3, HP250M3C / HP200S1, HP300S1
MAIN ADVANTAGES Plug & play, easy to install Trendsetting Low upfront costs will deliver energy cost savings Replace the water tank of aging systems for running cost savings Compatible with many other energy sources
TECHNICAL BENEFITS Micro-Channel Condenser The micro-channel condenser has larger contact surface for better heat transfer performance and less refrigerant consumption Condenser Micro-Channel VS. Coil Pipe HPWH-Compressor Special designed for heat pumps to maximum the efficiency Bottom Boost Condenser Extra bottom condenser enlarge the total heat exchange area to deliver more hot water and contributes to better efficiency
CONTROL SYSTEM Control panel 5 LED display with touch control 4 resp. 5 working modes AUTO mode Heat pump work in priority and electric heater work as backup to deliver hot water in pre-set temperature ECO mode Heat pump use the off-peak electricity to minimize the expenses ECO+ mode (S series only) Both heat pump and electric heater only work under off peak condition BOOST mode Heat pump and electric heater start up at same time to deliver hot water as fast as possible VACATION mode Stop working during vacation then back to AUTO mode just one day before user back from vacation
M-SERIES Explosive view Operating modes (external, exhaust and ambient air) M3 M3 M1 / M3
M-SERIES features COMFORT Working modes: Auto / Eco / Boost / Vacation Additional heating element Timer control Off Peak Power settings Hot water volume and temperature display EFFICIENCY & ENERGY SAVING COP (A15 / EN16147) = 3,25 (M3) Working temperature: -5 C (M3) Micro-Chanel condenser QUALITY Magnesium anode protection Titanium enamel steel tank 50mm PUF insulation DESIGN LED display with touch control Off peak power Additional energy source connection (M3 only)
SOLAR CONCEPT Solar heat pump system (M3) Combine the HP with a solar collector to increase the share of renewable energy Solar priority to save as much energy as possible Reduces electricity consumption No additional solar tank is needed Easy connection with preinstalled tubebundle heat exchanger of 1 m³ Preinstalled connections for temperature sensor pockets
M1 SERIES specifications Model HP200M1 HP250M1 Efficiency class A+ A+ Annual energy consumption (L), kwh 852 845 dimensions [mm] A B C D HP200M1 629 265 994 1670 HP250M1 629 265 1302 1965 Capacity, l 195 246 Refrigerant R134a R134a COP (A15 / EN16147) 2,90 2,90 Sound power, db(a) 60 60 Temp range (heat source), 7..35 7..35 Power input (heat pump only), W 650 650 Heating up time 7, h:mm / / Heating up time 15, h:mm 4:30 5:50 Electric backup, W 2150 2150 Extra heat exchanger No No Loading (QTY. 40HQ), units 51 51
M3 SERIES specifications Model HP200M3 HP250M3 HP250M3C Efficiency class A+ A+ A+ Annual energy consumption (L), kwh 895 913 906 Capacity, l 195 246 240 dimensions [mm] A B C D E F HP200M3 629 270 980 1692 180 HP250M3 629 270 1275 1987 180 HP250M3C 629 270 1275 1987 590 180 Refrigerant R134a R134a R134a COP (A7 / EN16147) 2,85 2,85 2,85 COP (A15 / EN16147) 3,30 3,30 3,30 Sound power, db(a) 59 59 59 Temp range (heat source), -5..35-5..35-5..35 Power input (heat pump only), W 495 495 495 Heating up time 7, h:mm 6:12 8:12 8:00 Heating up time 15, h:mm 4:40 6:21 6:21 Electric backup, W 1500 1500 1500 Extra heat exchanger No No Solar or boiler Loading (QTY. 40HQ), units 51 51 51
S-SERIES EXPLOSIVE VIEW OPERATING MODE
S-SERIES features COMFORT 5 Working modes: Auto / Eco / Eco+ / Boost / Vacation Low noise (external unit) Additional heating element Signal control or Timer control Off Peak Power settings Temperature and hot water volume display EFFICIENCY & ENERGY SAVING COP (A7, EN16147) = 3,20 Working temperature: -7 C..45 C Micro-Chanel condenser QUALITY Magnesium anode protection Titanium enamel steel tank 50mm PUF insulation DESIGN Flexible installing options with long distance between external unit and storage of 20 m LED display with touch control Off peak power mode
S1 SERIES specifications Model HP200S1 HP300S1 Efficiency class A+ A+ Annual energy consumption, kwh 804 (L) 1304 (XL) dimensions [mm] A B C D E F G H HP200S1 542 272 311 411 1530 1765 681 844 HP300S1 630 281 320 420 1519 1795 681 844 Capacity, l 195 293 Refrigerant R134a R134a COP (A7 / EN16147) 3,09 3,20 COP (A15 / EN16147) 3,70 4,30 Sound power, db(a) 64 64 Temp range (heat source), -7..45-7..45 Power input (heat pump only), W 665 885 Heating up time 7, h:mm 4:08 4:48 Heating up time 15, h:mm 3:26 3:58 Electric backup, W 2150 2150 Extra heat exchanger No No Loading QTY. 40HQ 60 units 51 units
TECHNICAL DATA M1 M3 S1 Monobloc Ambient Air Monobloc External Air Split External Air Model HP200M1 HP250M1 HP200M3 HP250M3 HP250M3C HP200S1 HP300S1 Efficiency class A+ A+ A+ A+ A+ A+ A+ Annual energy consumption, kwh 852 845 895 913 906 804 1304 Capacity, l 195 246 195 246 240 195 293 COP (A7 / EN16147) / / 2,8 2,81 2,82 3,09 3,20 COP (A15 / EN16147) 2,90 2,90 3,25 3,2 3,22 3,70 4,30 Sound power, db(a) 60 60 59 59 59 64 64 Temp. (heat source), 7..35 7..35-5..35-5..35-5..35-7..45-7..45 Average input (HP only), W 650 650 495 495 495 665 850 Heating up time 7, h:mm / / 6:12 8:12 8:00 4:08 4:48 Heating up time 15, h:mm 4:30 5:50 4:40 6:21 6:21 3:26 3:56 Electric backup, W 2150 2150 1500 1500 1500 2150 2150 Extra heat exchanger No No No No Yes No No
THANK YOU FOR YOUR ATTENTION GREENoneTEC Solarindustrie GmbH Industriepark St. Veit, Energieplatz 1 9300 St. Veit/Glan info@greenonetec.com www.greenonetec.com