Q On/Off push button locks for filling up mop buckets and automatic scrubbers. Chemical view window for monitoring product usage. Single knob for intuitive product selection. Fresh water rinse. Single key locks both cabinet doors. One handed bottle activation point mitigates foam. Holds up to four proprietary INFLUX 80 oz. bottles and proprietary cap to lock out the competition. Provides bottle fill and bucket fill option for all four products. Meets ASSE Standard #1055, Performance requirements for Chemical Dispensing Systems. Pre-plumbed dispenser makes for fast installation. 11590 PrecisionFlo Q 4 Product Dispenser PFQ 1048 Stinson Drive, Reading PA 19605 Phone: 1-800-548-4568
Product Dispenser Use Gallon Yield/ Bottle RTU ph Levels Features 1 3 HI-CON 4 EMERALD 5 FRESH BREEZE 6 TOPAZ OXYPLUS + 8 SUPER BLUE 9 ENZIBRITE 10 SANI-51 11 E01 E0 E03 E04 E0 All E1 General E18 Lavender E E4 STREAK FREE PURPLE REVITE ONE PASS Neutral Disinfectant Cleaner All Surface Neutral Cleaner General Purpose Cleaner Breeze Air Freshener Smoke & Odor Eliminator 115900 115901 11590 115903 115904 115905 115906 11590 115908 115909 115910 115911 11591 115913 115914 115915 115916 11591 115919 115918 161 161 16 31 13 81 13 161 1 1 8.5-9.0 11.5-1.0.5 -.0 8.0-8.5.0 -.5 6.5 -.0 9.5-10.0.0 -.5 11.0-11.5 5.0-5.5 9.0-9.5 5.0-5.5.0 -.5.0 -.5 10.0-10.5 8.5-9.0 Non-Ammoniated Glass Cleaner. Penetrates dust, grease, soil and smoke on all windows and other glass surfaces. Can be used on all glass surfaces indoors or outdoors. Safe for use on Plexiglas. Heavy Duty Cleaner Degreaser. Low foaming product is formulated to quickly and effectively remove grease, oil, carbon, or any other industrial soil. Phosphate free formula. Neutral Disinfectant & Detergent. Cleans, disinfects, and deodorizes in one step. Hospital grade. Optically Enhanced Neutral Floor Cleaner. Designed for daily use. Ideal in automatic scrubbers. Enhances the beauty of the floor when it dries. Dissolves all ice melt and hard water films without soap haze. Non-Acid Restroom Cleaner. Cleans, disinfects, and deodorizes in one step. Hospital grade. High ph. Anti-Slip Gloss Restorer. Designed for high speed maintenance. Create an anti-slip surface. Effectively cleans the floor and restores gloss. Can be mopped on or used through an automatic scrubber. Peroxide Disinfectant. Cleans, disinfects, and deodorizes in one step. Formulated with the power of Hydrogen Peroxide. Hospital grade disinfectant. Film Free All Purpose Cleaner. Removes heavy grease and soil. Moderate foam. Ideal for scrub and recoats. Aggressively removes embedded soils and scuffs. Prepares the surface for re-coating. Enzyme Enriched Floor Cleaner & Deodorizer. Grease digester with a pleasant potpourri scent. Provides bleaching action that brightens surfaces. Biological action continues to work between cleanings. Food Service Sanitizer. No rinse required. Quick efficacy sanitizes surfaces in 1 minute. Use on kitchen equipment, glassware, and utensils Low Odor Ultra Concentrated Stripper. Rapidly penetrates and strips off floor finish with minimum labor. Ideal for use in areas where odors are a concern. EcoLogo certified all-purpose cleaner. Hydrogen peroxide oxidizes the soil and stains, destroys odors and provides color safe bleaching action. No rinse required. Ecologo certified formula cleans and shines glass. Can be used as a light-duty cleaner on mirrors, sinks, countertops, stainless steel, and all other surfaces not harmed by water. Ecologo certified formula cleans away soap scum, mold & mildew stains, hard water deposits, rust stains, body oils, fats and dirt. Effectively removes difficult stains from ceramic tile floors and grouting. Neutral Disinfectant & Detergent. Cleans, disinfects, and deodorizes in one step. Hospital grade. Ecologo certified formula for everyday floor cleaning. Ideal use in mop and bucket cleaning or automatic floor scrubbers. Neutral ph. No rinsing required. May be used as a light duty spray and wipe cleaner. Ecologo certified formula lifts and emulsifies soils, fats, oils and greases without the use of solvents. Can be used to clean most hard surfaces such as walls, tile & grout, food processing and service areas. Ecologo certified formula performs all cleaning applications including removal of heavy grease and soil. Moderate foam. Leaves a clean, film free surface. Ideal for scrub and recoats. Odor counteractant. Instantaneously controls offensive odors and replaces them with a pleasant lavender fragrance. Safe to spray on most surfaces not harmed by water. Will not stain. Eliminates smoke and malodors by chemically neutralizing them permanently. Leaves a pleasant fragrance. Safe to spray on most surfaces not harmed by water. Will not stain.
4 Button Chemical Dispenser Installation Instructions Overview The 4 Button Chemical Dispenser makes users more efficient, filling bottles and buckets with ease and quickness.
Package Contains: Mounting Template Mounting hardware & key set 4 Button Chemical Dispenser Instruction sheet 4 pre-installed cap assemblies Suggested Tools: Hammer Phillips screwdriver Drill w/ 3/16 & 9/3 bits Level Pencil Package Contents / Required Tools Overview Dispenser use icons Operational Requirements Warnings Overall Dimensions Installation & Preparation Operation Troubleshooting Parts List Warranty Information Table of Contents 1 3 3 4 5 6 1
Dispenser Use Icons Bucket picture This icon indicates bucket fill activation point Bottle picture This icon indicates bottle activation point Operational Requirements Water Supply Requirements Water Pressure Water Temperature Minimum Maximum 0 psi (1.38 bar) 15 psi (8.6 bar)** - 150ºF (65.5ºC) ** Recommended water pressure is between 0 psi (1.38 bar) and 0 psi. (5.5 bar). If pressure exceeds 0 psi, it is recommended that a water pressure regulator is used. Warnings! All installations must conform to local plumbing codes and use approved backflow prevention devices. A pressure indicating tee is to be installed with existing faucets according to local plumbing codes in the state of Wisconsin and any other state that requires the use of a pressure indicating tee. ALWAYS WEAR PROTECTIVE CLOTHING AND EYEWEAR WHEN WORKING WITH CHEMICAL PRODUCTS
Overall Dimensions Installation & Preparation 1. Select desired location and position and hang mounting template.. Mark out the screw locations on the wall based on template. 3. Pre-drill holes using 9/3 drill bit and install supplied anchors. 4. Thread top two screws in anchors leaving enough space to hang dispenser on top two key hole slots. 5. Unlock and open doors to 4 Button Chemical Dispenser. (Figure 1) 6. Hang dispenser from screws and begin threading bottom two screws into bottom two anchors.. Confirm unit is level, then tighten screws against dispenser to ensure a secure fit. 8. Install Drip Tray by sliding into place against tab in back of drip tray holder. [Optional: Drill 3/16 hole into drip tray barb and attach /3 ID hose for draining chemical from drip tray] (Figure ) 9. Insert chemical containers in their respective locations. Attach pre-installed caps to the chemical containers. 10. Close and lock the cabinet doors. 11. Connect the supplied water hose to your water source. 3 Figure 1 Figure
Operation Chemical Selector Dial (Figure 3) 1. Turn the chemical selector dial to the desired chemical position, indicated by the directional arrow.. Dispense chemical by either activating the bottle fill lever or bucket fill button. 3. For rinse water, point the dial straight down at the water symbol- This is not potable water, do not drink. Figure 3 Dispenser Activation Points Bottle Fill (Figure 4) 1. Slide the bottle tube inside the spray bottle and raise the bottle to engage the u-shaped lever of the bottle fill assembly.. To stop filling, lower the bottle and the lever will disengage. 3. Be careful when removing the spray bottle so as to not splash residual chemical. Figure 4 Dispenser Activation Points Push Button Bucket Fill (if equipped) (Figure 5) 1. Place end of long hose into mop bucket or automatic scrubber.. To start the flow of diluted chemical, press button on unit above selector dial. [For continuous flow, twist button clockwise] 3. To disengage, release button. [or twist button counterclockwise] Figure 5 4
Troubleshooting Symptom Probable Cause Remedy Proportioner fails to draw chemical properly. 1. Insufficient water supply pressure.. Cap has chemical build-up 3. The outlet tubing might be pinched closed. 4. Mineral deposits are built up in the in the proportioner. 1. 0 PSI is the minimum allowable pressure.. Soak in hot water to clean. 3. Straighten out the tubing to remove the restriction. 4. Soak proportioner in delimer to clean mineral deposits. Air Gap Proportioner is dripping or spraying a mist (fan pattern) of water. 1. Mineral deposits are located on Air Gap nozzle. 1. Soak nozzle and inlet screen in delimer to clean mineral deposits. Water valve is not shutting off completely. Water valve is leaking. Threaded connections are leaking water. Selector valve is not selecting the correct chemical Water is leaking in between the two water valves 1. Bottle Fill valve will not shutoff.. Bucket Fill valve will not shutoff 1. Barbed nut is too loose. 1. The connection between the dispenser and water supply line is too loose or rubber washer is missing.. Backflow prevention devices and/or proportioners are too loose. 1. The transmission assembly is malfunctioning. 1. Plastic fitting connecting the water valves has lost its seal. 1. Make sure bottle fill hose is not pressed against the lever.. Make sure bucket fill lock is not engaged 1. Shut water supply off first. Hand-tighten the barbed nut. Do not over tighten w/tool. 1. Shut water supply off first. Carefully tighten the female hose coupling on the dispenser to the inlet water supply line. Do not over tighten.. Tighten loose connection(s) with tools if necessary. Do not over tighten if using tools. 1. Make sure the transmission is engaged with the selector valves. If problem persists, replace transmission assembly. 1. Remove the plastic fitting and apply silicone grease to both o-rings and reattach to the valves. 5
Parts List No. 1 3 4 5 6 Part No. 14-3-3 14--3 14--4 10-4 66-339-1 83-53-15 63-53-1 Description Cover plate (Button operated) Door Left side Door Right side Hinge Pin Knob Transmission Assembly Selector Assembly Part No. 66-1K 10-5- 98-40-4 100-1-38 Parts Not Shown Description Keyset Drip Tray Screw & Anchor Kit /3 Tubing, 15 8 163CHA-NB.5 GPM Action Gap Proportioner 9 16-30 Action Gap Assembly 10 11 1 14-5- 14-6-1 98-58-1 Push Button Valve Assembly Bottle Fill Valve Assembly Lever Assembly 13 14 44-3-6FCOS 14-16-1 6 Black Hose Assembly with Strainer Check Valve (Threaded) 15 100-1-18 /3 Tubing, 16 66-500-1 Wye Adapter 1 18 19 0 100-1-19 C38CR4W.00 66-4-1 89-30-GAP /3 Tubing, 5 Cap Assembly Bottle Fill Tube Action Gap Bucket Fill Tube Action Gap 6
Warranty Merchandise Returns No merchandise will be returned for credit without manufacturer s written permission. Please contact your dealer for warranty issues. Product Warranty Manufacturer s products are warranted against defective material and workmanship under normal use and service for one year from the date of manufacture. This limited warranty does not apply to any products that have a normal life shorter than one year or failure and damage caused by chemicals, corrosion, physical abuse, or misapplication. Rubber and synthetic rubber parts such as O -rings, diaphragms, PVC tubing, and gaskets are considered expendable and are not covered under warranty. This warranty is extended only to the original buyer of manufacturer products. If products are altered or repaired without prior approval of manufacturer, this warranty is void. Defective units or parts should be returned to the factory with transportation prepaid. If inspection shows them to be defective, they will be repaired or replaced without charge, F.O.B. factory. manufacturer assumes no liability for damages. Return merchandise authorization number must be granted in advance of returned units for repair or replacement (See Merchandise Returns above).