UPDATE SESSION : TESTING SERVICES Presented By: Puan Hjh Nur Fadhilah Muhammad Senior General Manager Testing Services Department
Testing Services Our Roles Government Assist Regulatory Bodies (ST, BOMBA, SKMM,JPJ) in implementing regulations/legislations. Industry Support companies Research and Development activities Test for compliance to company, association, national and international standards. Assist exporters meeting importing country s regulatory requirements.
Testing Services OUR RECOGNITION Accredited Laboratory Accredited by Standards Malaysia to MS ISO/IEC 17025 ASEAN EE MRA Appointed as Designated Testing Laboratory and Certification Body by Energy Commission of Malaysia Test Report for E&E issued by SIRIM QAS Intl. is recognized and accepted by regulators of member countries of ASEAN
Testing Services OUR RECOGNITION IECEE CB Scheme Accepted as an Issuing and Recognizing National Certification Body (NCB) and Certification Body Testing Laboratory Testing (CBTL) Services in the IECEE CB Scheme. Test reports and Test certificate issued by SIRIM QAS Intl. is recognized by almost 43 member countries of the IECEE CB Scheme Electrical & Electronic Test Lab - recognised by CSA (Canada) under its Qualified Testing Facilities - recognised by SASO (Saudi Arabia) approved laboratory under ICCP
Testing Services OUR RECOGNITION EMC Test lab Semi anechoic test facility is FCC listed. Test report issued by SIRIM QAS is accepted by FCC (USA) for their approval. Fire Protection UL (USA) recognize SIRIM QAS s Fire Door test facilities for UL certification Packaging Laboratory Certified by the world renowned International Safe Transit Association (ISTA), Test Report issued by SIRIM QAS Intl. is accepted by ISTA / US market.
Our Capabilities Cater wide range of testing services and categorized into seven (7) sections: Mechanical & Automotive Electrical & Electronic RF & EMC Civil & Construction Fire Protection Chemical & Consumer Plastics & Composite Material
CIVIL & CONSTRUCTION LABORATORY
CIVIL & CONSTRUCTION Tested Products Reinforce steel, fasteners, pipes and fittings, steel water tanks Cements, pavers, natural stones, playground equipment Plastic pipes and fittings, ceramic tiles, sanitary wares, clay pipes Thermal insulation materials, acoustic panels, energy efficiency glazing Wire rope slings, chain slings, lever hoists, wire ropes and cables
MECHANICAL & AUTOMOTIVE LABORATORY
MECHANICAL & AUTOMOTIVE Tested Products Helmets, safety shoes, safety vest Jerricans, pallete, plastics containers, boxes, Radiator, NGV, side mirror kerosene stove, LPG regulator electronics components
ELECTRICAL & ELECTRONIC LABORATORY
ELECTRICAL & ELECTRONIC Tested Products
Chemical & Consumer LABORATORY
CHEMICAL & CONSUMER Tested Products Industrial Chemicals, Building Materials Detergents, Herbal product, Cosmetics Spices, Sugar Varnish, Road marking paints, paints Disinfectant, foods Fabrics, Carpets Fuel Oil, Gear Lubricant
FIRE PROTECTION Non-loadbearing and loadbearing vertical and horizontal elements Indicative test LABORATORY Portable fire extinguisher Fire hose reels Fire reel hoses Landing valve CO2 valves Non-combustibility test Fire propagation test Surface spread of flame test
Fire Protection (FPST) FIRE PROTECTION Tested Products Door sets Lift Landing Door Brick / Block Walls Drywall Partition / Panel System Penetration Seals Roller Shutter Assemblies Fire Extinguishers Landing Valves
Radio Frequency & Electromagnetic Compatibility (EMC) LABORATORY
RF & EMC Tested Products Telecommunication Product - Wireless Product - Telephony Product Electrical Electronic Product - Information Technologies Equipment - Industrial, Scientific and Medical Equipment - Audio Video Product - Household appliances - Lighting apparatus - Automotive Sub Assemblies - Electric Motor Bike
PLASTICS & COMPOSITE MATERIALS TESTING Plastics Material Analysis Services via DMA, TMA, DSC, TGA Characterization Tools
PLASTICS & COMPOSITE MATERIALS TESTING DSC Analysis for Polymeric Materials Characterization
PLASTICS & COMPOSITE MATERIALS TESTING FTIR Characterization for Material Identification
PLASTICS & COMPOSITE MATERIALS TESTING AEROSPACE INDUSTRIES Approved test house for international aerospace companies for aerospace composite material testing services Leading Edge (LE), Trailing Edge (TE) and Aileron for the Airbus 320 series and A380, A400M, Eurocopter.
PLASTICS & COMPOSITE MATERIALS TESTING Basic Plastics Processing at Laboratory Scale For Testing Small Batch of Formulation
NEW TESTING SERVICES (Fire Protection Test)
New Testing Services Fire Protection HYDRAULIC TILTING TYPE FIRE RESISTANCE TEST FURNACE
HYDRAULIC TILTING TYPE FIRE RESISTANCE TEST FURNACE The furnace has internal chamber dimension of 5m (Length) x 4m (width) x 1.3m (depth) Is designed to be able to carry out load bearing and non-load bearing Fire Resistance Tests up to 6 hours rating on both vertical and horizontal elements of construction. The furnace is capable to carry out fire resistance testing on test specimens measuring 5m x 4m, 4m x 4m and 4m x 3m
HYDRAULIC TILTING TYPE FIRE RESISTANCE TEST FURNACE
Horizontal Fire Resistance Test Furnace
Vertical Fire Resistance Test Furnace
Fire Resistance Test on Non-load bearing and Load bearing Horizontal Elements of Construction. Flooring System Roofing System Suspended Ceiling System Beam Roller Shutter Assemblies (Horizontal) Ducting System
NEW REGULATORY REQUIREMENT FOR CoA IRON & STEEL
IRON & STEEL Fast Track Facilities for Importation of Iron & Steel will end by 21 st August 2013. Importers shall apply using new import mechanism. (Briefing on the new methods completed organised by MITI in KL, Penang and Johor).
NEW SERVICES CONSTRUCTION MATERIAL
2. New services Low Relaxation Test for PC Strand TEST STANDARD : MS1138, ASTM A416 & BS 5896 TEST PRINCIPAL : APPLY TENSION LOAD, MAINTAIN GRIPPING DISTANCE AND HOLD FOR 1000hr OR 200hr. RECORD DECREASE OF LOAD (RELAXATION) vs. TIME.
NEW SERVICES & REGULATORY REQUIREMENTS IN ELECTRICAL & ELECTRONIC SECTOR
New Energy Efficiency Test facilities SIRIM QAS INTERNATIONAL SDN.BHD. was officially launched by Minister of KeTTHA on 15 th May 2012
ENERGY EFFICIENCY 1) The Energy Efficiency test laboratory was officially launched by Energy, Green Technology and Water (KeTTHA) Minister Datuk Seri Peter Chin on 15th May 2012 2) This is the first Energy Efficiency testing laboratory in Malaysia. It is located in Section 16, Shah Alam. 3) The laboratory is ready to accept applications for energy efficiency testing for product such as refrigerators, lamp (and lighting devices) and air conditioner
ENERGY EFFICIENCY TEST FACILITIES Equipment at Section 16 Shah Alam 1. Integrating sphere for light output/lumen measurement 2. Environmental Chamber for refrigerator testing 3. Balanced type calorimeter for air-conditioner 4. Photobiological Hazard for LED lights 5. Goniophotometer for light output measurement
ENERGY EFFICIENCY TEST FACILITIES Equipment at SIRIM QAS HQ 1. Equipment for TV energy Efficiency Test 2. Air delivery system for ceiling fan & other fan 3. Ballast-watt loss measurement
Environmental Chamber for Refrigerator Testing
AIR DELIVERY TEST SYSTEM FOR CEILING FANS
Integrating Sphere - general purpose: to measure light characteristic for all kind of light sources.
Goniophotometer set equipment and software shall be used for Electrical and Photometric measurements of Lighting products for light distribution especially for various type of luminaires such as Indoor lighting, street lighting, flood lighting etc.
a) Balanced ambient room-type calorimeter system Testing method of the cooling and heating capacity: Room calorimeter method. It provides the testing with indoor and outdoor compartments as well as indoor and outdoor side controlled-temperature airspace which can make sure of thermal equilibrium delivery
MEPS : Minimum Energy Performance Standard Suruhanjaya Tenaga (Energy Commission) has established an energy labeling scheme for household appliances to assist Malaysian consumers. Peraturan Elektrik (Pindaan) 2013 effective 3 May 2013 specify the minimum energy performance standard for Refrigerator, Air-conditioner, Television, Fans and Lamps Energy Efficiency STAR rating become mandatory on 3 May 2014
ENERGY RATING LABEL
Electricity (Amendment) Regulations 2013 * 34 category of regulated items. * New categories: * 1) Massager, * 2) Air conditioner (cooling capacity of 32,000 Btu/hr & below) and * 3) Adaptor/charger. * Proposed date of adoption: * All local manufacturers, importers, distributors and retailers shall be given a grace period of at least 6 months from gazetted date (1 July 2013) in order to comply with the prescribed safety standards for new regulated electrical equipment to import/manufacture/display in the Malaysian market. * Proposed date of entry into force: 1 Jan 2014
ASEAN EEE MRA Electrical & Electronic Section (EEST) is one of the listed CABs (testing body) under the ASEAN EEE MRA : Effective date on 1 st April 2005 The listing of EEST are for all ASEAN countries: Malaysia, Singapore, Indonesia, Philippines, Thailand, Vietnam, Brunei, Laos, Cambodia, Myanmar
ASEAN EEE MRA Scope of EEST listing cover more than 200 EE products : i) Household appliances ii) Lighting and accessories iii) Wiring and installation iv) Audio/video and electronic Scope of listing can be obtained from the ASEAN website: http://aseansec.org/17417.htm
NEW SERVICES IN AUTOMOTIVE SECTOR
HELMETS TO ECE R22.05 Appointed as a TS under Category A by MOT on 6 th June 2012. 54
55
Appointment of SIRIM QAS Intl. as Technical Service (TS) by MOT Category A : TS which carry out in their own facilities the tests referred to in the regulations. Safety Helmets ECE R22 56
BRANCH OFFICE
PENANG Jalan Permatang Pauh, Butterworth, Pulau Pinang Tel: 04-5384260 Fax: 04-5384261
JOHOR BAHRU Address : No. 3, Jalan Teknologi 5, Taman Teknologi Johor, 81400 Senai, Johor Darul Takzim. Telephone : +607-599 8364/ 8367 Fax : +607-598 7059
Sarawak Lot 802, Demak Laut Industrial Park, Jalan Bako, 93050 Kuching Sarawak Tel : 082-439052 / 439054 Fax : 082-439055
SIRIM QAS INTERNATIONAL Sdn. Bhd SABAH Lot 1, Fasa 1, Zon Perdagangan (KKIP), Jalan Timur 6, 88450 Sabah, Malaysia. Tel: (6088) 491405 / 491415 Fax: (6088) 491411 SIRIM QAS INTERNATIONAL Sdn. Bhd. LABUAN Jalan Merdeka TEL : 087-422718 FAX : 087-422718
Puan Hjh Nur Fadhilah Muhammad Senior General Manager Testing Services Department SIRIM QAS INTERNATIONAL SDN. BHD. Tel : 603-5544 6666 Fax : 603-5510 9460 Email : tsd@sirim.my