Material Safety Data Sheet

Similar documents
Material Safety Data Sheet

MATERIAL SAFETY DATA SHEETS

SAFETY DATA SHEET CHUBB ABE40 DRY CHEMICAL POWDER FIRE EXTINGUISHER FLAMEGUARD R ABE DRY CHEMICAL POWDER FIRE EXTINGUISHER

Material Safety Data Sheet

Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION. Product name: Product Number:

MATERIAL SAFETY DATA SHEET FOR MOISTUREGUARD FOR CCA. 1.0 Introduction NZS 5433:1999.

Material Safety Data Sheet Masonite TM Hardboard

ICE BANK DESCALER & ICE MACHINE CLEANER

Material Safety Data Sheet

Revision date: 22/4/2016 Date of print: 11/5/2016 Version: 1 Language: en-ca,us Page: 1 of 8

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. according to Regulation (EC) No 1907/2006 WICKES SMOOTH MASONRY

Safety Data Sheet. according to Regulation (EC) No 1907/2006. SECTION 1: Identification of the substance/mixture and of the company/undertaking

Certificate of Compliance Section 1 - PRODUCT AND COMPANY IDENTIFICATION

3.1. Substances Not applicable 3.2. Mixtures Name Product identifier % GHS-CAN Classification GHS-US classification

Material Safety Data Sheet

Material Safety Data Sheet

PRODUCT SAFETY DATA SHEET

3M MATERIAL SAFETY DATA SHEET 3M(TM) Transpore(TM) Surgical Tape Cat. # 1527 series, 1527S-1, 1527S-2 04/07/2006

EMERGENCY PHONE: or (651) (24 hours)

3M MATERIAL SAFETY DATA SHEET 3M(TM) Durapore(TM) Surgical Tapes Cat. #1538 and 1538S series 02/27/2006

43 May cause sensitisation by skin contact. 67 Vapours may cause drowsiness and dizziness.

EMERGENCY PHONE: or (651) (24 hours)

MATERIAL SAFETY DATA SHEET 3M Single Coated Medical Plastic Tape 1527L, 1527LX, 1527SP and 1527ENP 02/21/11

3M MATERIAL SAFETY DATA SHEET 3M(TM) Micropore(TM) Surgical Tape 1530, 1530S, 1530B, 153NS, /03/2006

Certificate of Compliance

Safety Data Sheet. acc. to OSHA HCS. Printing date 09/25/2014 Revised On 09/25/2014

Safety Data Sheet. acc. to OSHA HCS. Printing date 09/25/2014 Revised On 09/25/2014

1. Chemical Product and Company Identification

Safety Data Sheet. acc. to OSHA HCS. Printing date 09/25/2014 Revised On 09/25/2014

EMERGENCY PHONE: or (651) (24 hours)

Safety Data Sheet. acc. to OSHA HCS. Printing date 09/25/2014 Revised On 09/25/2014

Safety Data Sheet for use in USA Date: October 1, IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY Trade name:

MATERIAL SAFETY DATA SHEET 3M Durapore Surgical Tapes Cat. # L (with liner) and 1538S series 02/03/12

Safety Data Sheet. P.O. Box St. Louis MO Phone: Emergency telephone number: CHEMTEL GHS02 GHS04 GHS07 GHS08

EMERGENCY PHONE: or (651) (24 hours)

Kent Reef Carbon Material Safety Data Sheet

Safety Data Sheet. acc. to OSHA HCS. Printing date 09/26/2014 Revised On 09/26/2014

Safety Data Sheet. acc. to OSHA HCS. Printing date 09/26/2014 Revised On 09/26/2014 BIG RIG NEW EQUIPMENT YELLOW

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON INGREDIENTS

EMERGENCY PHONE: or (651) (24 hours)

SAFETY DATA SHEET. 1. Identification

This MSDS has been compiled in accordance with - EC Directive 91/155/EC - OSHA's Hazcom Standard (29 CFR )

MATERIAL SAFETY DATA SHEET 3M Micropore Surgical Tape 1530, 1530S, 1530B, 153NS, /24/12

EMERGENCY PHONE: or (651) (24 hours)

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON INGREDIENTS 3. HAZARDS IDENTIFICATION 4. FIRST AID MEASURES

Certificate of Compliance

Certificate of Compliance Section 1 - PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET 3M Tapes: 3900, 3939, 6969, 2929, 5959, 8979, 8979N, and /19/13

EMERGENCY PHONE: or (651) (24 hours)

Certificate of Compliance. 1.2 ITEM NUMBER AND SIZES: ml, ml, ml, ml

Safety Data Sheet. Printing date 01/13/2017 Revised On 01/13/2017

SAFETY DATA SHEET. 1. Chemical Product and Company Identification. 2. Hazards Identification. 3. Composition/Information of Ingredients CH 3

EMERGENCY PHONE: or (651) (24 hours) Ingredient C.A.S. No. % by Wt POLYPROPYLENE

Material Safety Data Sheet SECTION 1: PRODUCT AND COMPANY IDENTIFICATION SECTION 2: INGREDIENTS SECTION 3: HAZARDS IDENTIFICATION

Safety Data Sheet acc. to OSHA HCS

Safety Data Sheet. acc. to OSHA HCS. Printing date 09/25/2014 Revised On 09/25/2014

Safety Data Sheet. acc. to OSHA HCS. Printing date 09/26/2014 Revised On 09/26/2014 HI TECH CLEAR ENGINE COATING

Material Safety Data Sheet

EMERGENCY PHONE: or (651) (24 hours)

Safety Data Sheet. Printing date 03/05/2015 Revised On 03/05/2015

Radiator Additive. ZetaLube. Description

Safety Data Sheet. Printing date 04/15/2015 Revised On 03/12/2015

Safety Data Sheet. acc. to OSHA HCS. Printing date 09/26/2014 Revised On 09/26/2014

Safety Data Sheet. according to Regulation (EC) No 1907/2006. WICKES DURABLE MATT EMULSION colours

Z86 Safety-Plus Industrial Cleaner Concentrate

PRODUCT SAFETY DATA SHEET

Safety Data Sheet. Printing date 04/15/2015 Revised On 03/12/2015

ACGIH TLV. Calcium Sulfate 15 mg/m³ TWA (total); 5 mg/m³ TWA (respirable) 10 mg/m³ TWA (irritation) Particles, Not Otherwise Specified (PNOS)

Material Safety Data Sheet. acc. to ISO/DIS Printing date 01/26/2001 Reviewed on 03/28/2000

Safety Data Sheet. Printing date 01/29/2015 Revised On 01/29/2015

EMERGENCY PHONE: or (651) (24 hours)

Safety Data Sheet. acc. to OSHA HCS. Printing date 09/25/2014 Revised On 09/25/2014

Emergency Telephone Number Emergency Number : CHEMTREC / CANUTEC

Safety Data Sheet. acc. to OSHA HCS. Printing date 09/25/2014 Revised On 09/25/2014

Safety Data Sheet. acc. to OSHA HCS. Printing date 10/03/2014 Revised On 10/03/2014

MATERIAL SAFETY DATA SHEET 3M Earloop Fluid Resistant Face Mask Cat. # 1820, 1820FS 09/18/12

Safety Data Sheet. Printing date 04/16/2015 Revised On 02/02/2015

Safety Data Sheet. Printing date 04/16/2015 Revised On 02/02/2015

Laundry Sour. Providing Quality Maintenance and Chemical Specialty Solutions with Unparalleled Customer Service

Safety Data Sheet. acc. to OSHA HCS. Printing date 09/25/2014 Revised On 09/25/2014

EMERGENCY PHONE: or (651) (24 hours)

Safety Data Sheet. Printing date 12/01/2014 Revised On 12/01/2014

Safety Data Sheet. acc. to OSHA HCS. Printing date 09/25/2014 Revised On 09/25/2014

Pressed pyrotechnical powder.

Safety Data Sheet. Printing date 03/17/2017 Revised On 03/15/2017

Safety Data Sheet. 1 Identification of the substance and manufacturer

Material Safety Data Sheet acc. to ISO/DIS 11014

Safety Data Sheet. Printing date 01/25/2016 Revised On 01/15/2016 FRESH AND QUICK GRAY PRIMER

Disposal Manual. m{zd{ 6. Capacitor( -ELOOP ) October 2012 Mazda Motor Corporation

Laundry Detergent. Providing Quality Maintenance and Chemical Specialty Solutions with Unparalleled Customer Service

Safety Data Sheet. Printing date 06/05/2015 Revised On 06/05/2015

Solid Fiber Sheets Safety Data Sheet Revision Date: 02/04/2016 Date of issue: 02/04/2016 Version: 1.0

Safety Data Sheet. Printing date 05/12/2015 Revised On 05/12/2015

Safety Data Sheet. Printing date 11/30/2015 Revised On 11/30/2015

Safety Data Sheet. 1 Identification of the substance and manufacturer

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. Printing date 01/26/2016 Revised On 01/26/2016 SUPER COAT-A SAFETY YELLOW

Transcription:

NON-Hazardous Substance, NON-Dangerous Goods 1. MATERIAL AND SUPPLY COMPANY IDENTIFICATION Synonyms: Mancode Bostik Roof & Gutter Clear Translucent, 300 grams 292028 Bostik Roof & Gutter Colour Classic Cream, 300 grams X 6 329770 Bostik Roof & Gutter Colour Classic Cream, 300 grams X 12 271225 Bostik Roof & Gutter Colour Cottage Green, 300 grams X 6 329797 Bostik Roof & Gutter Colour Cottage Green, 300 grams X 12 271195 Bostik Roof & Gutter Colour Deep Ocean, 300 grams X 6 329843 Bostik Roof & Gutter Colour Deep Ocean, 300 grams X 12 271241 Bostik Roof & Gutter Colour Galvanised Grey, 300 grams X 6 329835 Bostik Roof & Gutter Colour Galvanised Grey, 300 grams X 12 292036 Bostik Roof & Gutter Colour Jasper, 300 grams X 12 366552 Bostik Roof & Gutter Colour Loft, 300 grams X 12 366544 Bostik Roof & Gutter Colour Manor Red, 300 grams X 6 329800 Bostik Roof & Gutter Colour Manor Red, 300 grams X 12 271209 Bostik Roof & Gutter Colour Pale Eucalypt, 300 grams X 6 329789 Bostik Roof & Gutter Colour Pale Eucalypt, 300 grams X 12 271217 Bostik Roof & Gutter Colour Paperbark, 300 grams X 6 327427 Bostik Roof & Gutter Colour Steel Black, 300 grams X 12 292001 Bostik Roof & Gutter Colour Surfmist, 300 grams X 6 329762 Bostik Roof & Gutter Colour Surfmist, 300 grams X 12 271268 Bostik Roof & Gutter Colour Vivid White, 300 grams 291986 Bostik Roof & Gutter Colour Woodland Grey, 300 grams X 6 329827 Bostik Roof & Gutter Colour Woodland Grey, 300 grams X 12 271233 Bostik Roof & Gutter Silicone Black, 300 grams X 20 241024 Bostik Roof & Gutter Silicone Grey, 300 grams X 20 241016 Bostik Roof & Gutter Silicone Translucent, 300 grams 241008 Bostik Roof & Gutter Silicone Translucent, 615 grams X20 302198 Bostik Roof & Gutter Silicone White, 300 grams X20 240990 Bostik Roof & Gutter Silicone Grey, 615 grams X20 331406 Recommended use: General purpose silicone sealant. Supplier: Bostik Australia Pty Ltd Bostik New Zealand Limited ABN: 79 003 893 838 Street Address: 51-71 High Street 19 Eastern Hutt Road Thomastown VIC 3074 Wingate Lower Hutt Australia New Zealand Telephone: +613 9279-9333 +644 567-5119 Facsimile: +613 9279-9342 +644 567-5412 Website: www.bostik.com.au www.bostik.co.nz Emergency telephone number: Australia 1800 033 111 New Zealand 0800 243 622 Issued: 12 January 2010 Version: 3.1 Page: 1 of 6

2. HAZARDS IDENTIFICATION AUSTRALIA CLASSIFICATION Based on available information, this material is not classified as hazardous according to criteria of Safe Work Australia. Poisons Schedule (Aust): Not applicable NEW ZEALAND CLASSIFICATION Based on available information, this material is not classified as hazardous according to criteria of ERMA New Zealand. DANGEROUS GOODS CLASSIFICATION Not classified as Dangerous Goods by the criteria of the Australian Code for the Transport of Dangerous Goods by Road & Rail and the New Zealand NZS5433: Transport of Dangerous Goods on Land. 3. COMPOSITION INFORMATION CHEMICAL ENTITY CAS NO. PROPORTION Ingredients determined to be non-hazardous - 100% 2-Butanone oxime (Methyl ethyl ketoxime) will be released during sealant curing 96-29-7-100% 4. FIRST AID MEASURES If poisoning occurs, contact a doctor or Poisons Information Centre (Phone Australia 131 126, New Zealand 0800 764 766). Inhalation: Remove victim from exposure - avoid becoming a casualty. Remove contaminated clothing and loosen remaining clothing. Allow patient to assume most comfortable position and keep warm. Keep at rest until fully recovered. Seek medical advice if effects persist. Skin contact: If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. If swelling, redness, blistering or irritation occurs seek medical assistance. Eye contact: If in eyes wash out immediately with water. In all cases of eye contamination it is a sensible precaution to seek medical advice. Ingestion: Rinse mouth with water. If swallowed, do NOT induce vomiting. Give a glass of water to drink. Never give anything by the mouth to an unconscious patient. If vomiting occurs give further water. Seek medical advice. Notes to physician: Treat symptomatically. Issued: 12 January 2010 Version: 3.1 Page: 2 of 6

5. FIRE-FIGHTING MEASURES Specific hazards: Combustible material. Fire fighting further advice: On burning may emit toxic fumes. Fire fighters to wear self-contained breathing apparatus and suitable protective clothing if risk of exposure to vapour or products of combustion. Hazchem Code: Not applicable. Suitable extinguishing media: If material is involved in a fire use water fog (or if unavailable fine water spray), foam, dry agent (carbon dioxide, dry chemical powder). 6. ACCIDENTAL RELEASE MEASURES SMALL SPILLS Wear protective equipment to prevent skin and eye contamination. Avoid inhalation of vapours. Wipe up with absorbent (clean rag or paper towels). Allow absorbent to dry before disposing with normal household garbage. LARGE SPILLS Slippery when spilt. Avoid accidents, clean up immediately. Wear protective equipment to prevent skin and eye contamination and the inhalation of vapours. Work up wind or increase ventilation. Contain - prevent run off into drains and waterways. Use absorbent (soil, sand or other inert material). Collect and seal in properly labelled containers or drums for disposal. If contamination of sewers or waterways has occurred advise local emergency services. Dangerous Goods Initial Emergency Response Guide No: Not applicable. 7. HANDLING AND STORAGE Handling: Avoid eye contact and repeated or prolonged skin contact. Storage: Store in a cool, dry, well-ventilated place and out of direct sunlight. Store away from incompatible materials described in Section 10. Keep containers closed when not in use - check regularly for leaks. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION National occupational exposure limits: No value assigned for this specific material by Safe Work Australia or Department of Labour New Zealand. Biological Limit Values: As per the National Model Regulations for the Control of Workplace Hazardous Substances [NOHSC: 1005 (1994)] the ingredients in this material do not have a Biological Limit Allocated. Engineering measures: Natural ventilation should be adequate under normal use conditions. Personal protection equipment: OVERALLS, SAFETY SHOES, SAFETY GLASSES, GLOVES. Issued: 12 January 2010 Version: 3.1 Page: 3 of 6

When handling individual retail packs no personal protection equipment is required. Wear overalls, safety glasses and impervious gloves. Use with adequate ventilation. If inhalation risk exists wear organic vapour/particulate respirator meeting the requirements of AS/NZS 1715 and AS/NZS 1716. Available information suggests that gloves made from nitrile rubber should be suitable for intermittent contact. However, due to variations in glove construction and local conditions, the user should make a final assessment. Always wash hands before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storing or re-using. 9. PHYSICAL AND CHEMICAL PROPERTIES Form / Colour / Odour: Various coloured thixotropic paste with low odour Solubility: Insoluble in water Specific Gravity (20 C): 1.0 Relative Vapour Density (air=1): >1 Vapour Pressure (20 C): Flash Point ( C): Flammability Limits (%): Autoignition Temperature ( C): Melting Point/Range ( C): Boiling Point/Range ( C): ph: N App Evaporation Rate (n-butyl acetate=1): >1 VOC (g/l): Black, Grey & White 33 Clear 62 Aluminium grey & Transparent 105 (Typical values only - consult specification sheet) = Not available N App = Not applicable 10. STABILITY AND REACTIVITY Chemical stability: This material is thermally stable when stored and used as directed. Conditions to avoid: Elevated temperatures and sources of ignition. Contact with water (including humid conditions) will result in product curing. Incompatible Materials: Oxidising agents. Hazardous decomposition products: Oxides of carbon and nitrogen, smoke and other toxic fumes. Hazardous reactions: When curing, methyl ethyl ketoxime will be released. 11. TOXICOLOGICAL INFORMATION No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and the product label. Symptoms or effects that may arise if the product is mishandled and overexposure occurs are: Issued: 12 January 2010 Version: 3.1 Page: 4 of 6

Acute Effects Inhalation: Methyl ethyl ketoxime is liberated during application and curing. Vapour may be irritant to mucous membranes and respiratory tract. Skin contact: Repeated or prolonged skin contact may lead to irritation. Methyl ethyl ketoxime, released during application and curing, is a skin sensitiser. Repeated or prolonged skin contact may lead to allergic contact dermatitis. Cured sealant is not expected to be a skin irritant. Eye contact: May be an eye irritant. Ingestion: Swallowing can result in nausea, vomiting and irritation of the gastrointestinal tract. Swallowing cured sealant not expected to cause adverse effects expected however large amounts may cause nausea and vomiting. Long Term Effects: Repeated or prolonged exposure to methyl ethyl ketoxime may result in nasal tissue damage (based on animal testing). Acute toxicity / Chronic toxicity No LD50 data available for the product. However, for the constituent: Methyl ethyl ketoxime (2-Butanone oxime): Oral LD50 (rat): Dermal LD50 (rat): Inhalation LC50 (rat): Eye irritant (rabbit): Skin irritant: Skin sensitiser: 2,300-3,700 mg/kg >1,000 mg/kg >4.8 mg/l (4 hour) Corrosive Mild irritant. Weak skin sensitiser. 12. ECOLOGICAL INFORMATION Avoid contaminating waterways. Ecotoxicity: No information available. Persistence and degradability: No information available. Mobility: No information available. 13. DISPOSAL CONSIDERATIONS Refer to State/Territory Land Waste Management Authority. 14. TRANSPORT INFORMATION ROAD AND RAIL TRANSPORT Not classified as Dangerous Goods by the criteria of the Australian Code for the Transport of Dangerous Goods by Road & Rail and the New Zealand NZS5433: Transport of Dangerous Goods on Land. Issued: 12 January 2010 Version: 3.1 Page: 5 of 6

MARINE TRANSPORT Not classified as Dangerous Goods by the criteria of the International Maritime Dangerous Goods Code (IMDG Code) for transport by sea. AIR TRANSPORT Not classified as Dangerous Goods by the criteria of the International Air Transport Association (IATA) Dangerous Goods Regulations for transport by air. 15. REGULATORY INFORMATION Poisons Schedule (Aust): Not applicable All the constituents of this material are listed on the Australian Inventory of Chemical Substances (AICS). 16. OTHER INFORMATION Literary reference This Material Safety Data Sheet has been prepared by EIAS Pty Ltd on behalf of its client. Reason(s) For Issue: Addition of NZ classification information Material Safety Data Sheets are updated frequently. Please ensure that you have a current copy. This MSDS summarises at the date of issue our best knowledge of the health and safety hazard information of the product, and in particular how to safely handle and use the product in the workplace. Since Bostik Australia Pty Ltd cannot anticipate or control the conditions under which the product may be used, each user must, prior to usage, review this MSDS in the context of how the user intends to handle and use the product in the workplace. If clarification or further information is needed to ensure that an appropriate assessment can be made, the user should contact this company. Our responsibility for product as sold is subject to our standard terms and conditions, a copy of which is sent to our customers and is also available upon request. Issued: 12 January 2010 Version: 3.1 Page: 6 of 6