ugust 200 00 ccessories ook Fantech I Your Ventilation Solutions ompany
Supply/xhaust Fans ombination xhaust Grill and Light VL Vent light combination. Smallscale grill with 0 watt halogen light (MR1 bulb included). UL approved for wet locations. Kit includes prewired grill light assembly with back-draft damper, 0 watt halogen bulb, and to - inch reducer for connecting ductwork.oes not include fan. May also be used as a light only. Roof ap Inline Fan VL 0w Halogen Light 1 /2 0w Halogen 1 / / uct connections are / smaller than duct size. Fixed xhaust Grills G Fantech s esigner Grill. low profile, fixed circular plastic exhaust grill. Included with the grill is a matching diameter galvanized mounting collar with nailing strip. G Fantech s esigner Grill/ amper. Same as G with integrated backdraft damper. ø ø ø ø G G UP# 90 90 ø / / / 1 / 1 / ø / / / / uct connections are 1 / smaller than duct size. 2 I Fantech ccessories ook G G UP# 9 9 ø / / / 1 / 1 / ø / / uct connections are 1 / smaller than duct size. ll Fantech grills (except VL) are available in bulk packs. Suggested maximum airflow for Fantech xhaust Grills is: 0FM; FM, FM, 200FM.
Supply/xhaust Fans djustable xhaust Grills PG Fantech s Plastic Grill. low profile, adjustable intake/ exhaust circular grill. Included with the grill is a matching diameter galvanized mounting collar with nailing strip. PG Plastic Grill includes integrated backdraft damper. low profile, adjustable intake/exhaust circular grill. Included with the grill is a matching diameter galvanized mounting collar with nailing strip. ø ø ø ø PG PG PG PG UP# 000 000 000 000 ø 1 /2 1 / / 9 1 /2 / / / / 1 1 /2 1 / 1 / 1 / ø / / / / / / / / uct connections are 1 / smaller than duct size. MG/MG Fantech s Metal Grill. White powder coat finish. low profile, adjustable intake/ exhaust circular grill. Included with the grill is a matching diameter galvanized mounting collar with nailing strip. PG PG UP# 00 00 ø / / / / 1 / 1 / ø / / / / uct connections are 1 / smaller than duct size. djustable Supply Grills MGS Fantech's Metal Supply Grill. White powder coat finish. low profile, adjustable, circular supply grill. Included with grill is a matching diameter galvanized mounting collar with nailing strip. MG includes integrated backdraft damper ø ø ø UP# MG 00 MG 00 MG 00 MG 00 MG 0 MG 0 ø / / 1 /2 9 1 / / / / / / / 1 /2 / 1 / / uct connections are 1 / smaller than duct size. 1 / 1 / 1 / 1 / 1 1 /2 ø / / / / / / / / / ø MGS MGS MGS MGS UP# 0 0 0 0 ø / 1 / 1 /2 9 1 / / / / / 1 / 1 / 1 / 1 / ø / / / / / / / / uct connections are 1 / smaller than duct size. Fantech I Your Ventilation Solutions ompany I
ontrols & Switches Pressure Switches ryer boost switch. utomatic pressure switch allows for fully automatic operation of dryer booster fan. Fan runs for minutes when positive pressure is sensed in the duct line then shuts off and turns on again as needed. Switch suitable for 11 volt supply. 2 amp rating. Variable Speed ontrollers S Series Slide type variable speed controller with on/off switch. White ecora-style switch plate and screws included. Fits standard single gang box. Note: S protrudes /-inch from wall. UP #0 S S UP# 0 0 Volts 11 11 mps 1 /2 / W Series FPS 1 W1 and W2 (2 wire) rotary type variable speed controller with on/off switch. rushed aluminum switch plate and screws included. Fits standard single gang box. W1H ( wire) contains all the features as the W1 with a high speed bypass. Pressure switch. djustable between 0.0 to 1.0 water differential pressure. Using either positive or negative pressure sensing for duct line. Switch suitable for 11 volt supply. amp rating. UP# W 1 00 W 1H 00 W 2 00 Volts 11 11 0 mps UP #0 RP Series / / Heavy duty rotary type variable speed controller with on/off switch. rushed aluminum switch plate and screws included. 1 / 1 /2 RP RP 1 RP 2 UP# 0 01 2 Volts 11 11 20 mps 1 I Fantech ccessories ook
ontrols & Switches Timers F 0M lectronic push button timer. Select from, 20, 0 and 0 minute timed operation of fan. Includes ecora style white switch plate and screws. Fits standard single gang box. Ideal for multiple switching locations. Switch suitable for 11 volt supply. 20 amp rating. UP #200 ehumidistat ontroller FH 20 Wall mounted dehumidistat. djustable between 20% and 0% relative humidity. Switch suitable for up to 11 volt supply.. amp rating. White. UP #020 F 0M Mechanical crank timer. Select from 1 to 0 minutes of timed fan operation. Switch suitable for 11 or 20 volt supply. amp rating. Use with ecora-style or standard white face plate (not included). Suitable for multiple switching locations. ttic Thermostat FT Thermostat for use with attic ventilation systems. djustable between 0º and 10ºF. Switch suitable for 11 volt supply. amp rating. UP #291 UP #00 FL 0 Fan/Light delay timer switch. llows continuous operation of the fan for up to 1 hour after light switch is turned off. Switch suitable for 11 volt supply. amp rating. rushed aluminum switch plate and screws included. Suitable for single switching location. UP #00 ir Screen ontrols S S ast metal and plastic plunger style door switch. Switch suitable for 11 or 20 volt supply. 1 amp rating. esigned for use with Fantech ir Screens -00 through S-0 UP #291 RTS2 1-minute timer with L light for use with the majority of Fantech residential Heat Recovery and nergy Recovery Ventilators.Works as an override switch to turn HRV or RV on high speed for 1 minutes. Up to four timers can be used. Install in bathrooms, kitchen or laundry where ever easy-access wall control is needed. 2 volt. UP # S TS Two-stage thermostat for heated ir Screens. Switch suitable for 11 or 20 volt supply. amp rating. UP #29 Fantech I Your Ventilation Solutions ompany I
ontrols & Switches HRV/RV ontrols F IGITL ISPLY Shows Indoor Humidity Level HUMIISTT ONTROL ehumidistat is ideal for use in energy efficient houses where indoor humidity (during the heating season) is higher than outdoor levels. High humidity is a major cause of structure damage and IQ problems such as mold and mildew. OVRRI TIMR When pressed, unit will provide high speed ventilation for one 1, 0 or 0 minute period. MINTNN LIGHT Light comes on when it s time to clean unit. POWR On/Off and Reset MOS Select Intermittent, Recirculation or ontinuous Ventilation Modes ontrol multiple functions of your Fantech HRV/RV with one slimline wall control. Two-wire connection simplifies installation. Use one F per HRV/RV installed. OVRRI SP ONTROL Push to select override speed of unit. YL ONTROL Set unit to cycle on 1, 20, or 0 minutes every hour MO SP Set Unit to Low, Medium or High Speed F2 MH 1 Multi-function wall control for use with Fantech SHR/VHR Heat Recovery units or SR nergy Recovery units. Two-wire connection simplifies installation. Similar to F (shown above) without recirculation mode. UP# 11 2-wire low voltage dehumidistat control with rotary dial. Just turn the dial to set the humidity level. Multiple units can be used with Fantech HRV's. Install in bathrooms, kitchen or laundry for easy access. UP# 1 MH 2 ehumidistats QS 1 ir Quality Sensor for use with Fantech HRV/RV systems. utomatically senses pollutants and activates HRV/RV to high speed if levels exceed normal condition. Features indicator light that changes color to indicate level of pollution in the home. Pushbutton override switch sets unit to run 1,2 or hours at high speed. Three-position for efficient operation. Use one per HRV/RV system. MPG 0 -wire low voltage dehumidistat control with power indicator light and on/off switch. ial lights up when dehumidistat turns unit to high speed. Use one per HRV system. (o not use with F.) UP# 1 Magnehelic Pressure Gauge for measuring and balancing airflow. (0.0"/2000-O).Shown here with optional accessories. For complete list of available accessories see Fantech Price List. I Fantech ccessories ook UP# UP# 209
uct Supplies Iris ampers IR Iris dampers for quiet, precise balancing of ventilation systems. ampers include calibrated airflow measuring devise. ackdraft ampers RSK ackdraft dampers with galvanized steel collar and lightweight aluminum damper blades. Spring loaded for positive closure. ir Flow IR IR IR IR IR IR IR 1 IR 20 IR 2 UP# 00 00 00 00 0 0 200 20 1 19 / 2 / 1 /2 1 / 9 11 1 / 1 1 2 / 2 2 1 / 2 1 /2 2 2 1 / 2 / 2 / 1 / 2 / 2 / uct connections are 1 / smaller than duct size. RSK RSK RSK RSK RSK RSK RSK 1 RSK 1 UP# 900 900 900 900 90 90 9 9 1 1 1 / 1 / 1 / 1 / / / uct connections are 1 / smaller than duct size. Lint Trap for ryer oosting LT Paintable galvanized metal lint trap for dryer boosting applications. Use when duct length between dryer and booster fan is less than 1 feet. Fits -inch duct. Features pull out door with view window, removable lint filter for easy cleaning and 1 /2-in flange for flush mount installation. 1 / 1 / 2 1 /2 UP #00 2 1 /2 Fantech I Your Ventilation Solutions ompany I
uct Supplies Sheet Metal dapters FY Y adapter for circular duct. onstructed of galvanized sheet metal. KR Increaser or reducer for circular duct. onstructed of galvanized sheet metal. FY FY FY FY FY FY UP# 00 00 00 0 00 uct connections are 1 / smaller than duct size. Roof urbs WI/I Prefabricated roof curbs reduce installation time by ensuring compatibility of the fan and curb. urbs feature a welded 1 gauge galvanized steel construction, -inch cant, insulation and wooden nailing rail. Standard height is -inches. 1 /2 11 1 /2 1 1 /2 1 /2 1 1 1 /2 1 1 1 1 /2 WI I 1Q0 UP# 21 21 1 1 1 /2 FNS R R XL R XL KR KR KR UP# 0 0 0 1 / 1 / uct connections are 1 / smaller than duct size. Silencers for Round uct L 1 / 1 /2 1 / Galvanized steel silencer for use in kitchen range hood ventilation and other applications were noise is a concern. Fantech silencer can typically reduce the perceived sound level of the system by more than 0%. Units feature rubber seal on inlet and outlet. Note:The recommended connector for the L is the F-1 (see page 9). L L L L L L L 1 UP# 900 900 900 900 90 90 9 1 Outside ø 9 1 / 1 /2 1 1 / 2 Length 2 / 2 / 2 / 2 / 1 /2 1 /2 1 /2 uct connections are 1 / smaller than duct size. 1 1 /2 / L L L L L L L 1 Sound ata (Suppresion d Frequency ands Hz) 20 1 9 11 9 00 2 1 1 21 1 11 00 2 2 2 2 2 2000 1 29 9 2 19 000 0 2 2 20 1 000 2 19 1 19 1 1 I Fantech ccessories ook
uct Supplies Round Flexible uct FIT lamps for ircular uct Flexible round insulated duct. vailable in 2-foot lengths. UL listed. FIT FIT FIT FIT FIT UP# 900 900 900 900 90 Plastic duct clamps. For use with flexible duct, easy to install locking slide clamps. UP# 1 1 1 - - Inlet Guards IG lbows FL Wire ring inlet guards used to prevent foreign objects from entering duct line. Zinc chromate plated steel. IG IG IG IG IG IG UP# 00 00 00 00 0 0 Heavy-duty plastic 90º mounting collar/elbow for use in 2 x stud walls. Use with -inch duct. With half-inch drywall lip already set, just nail in place and connect duct. Low depth profile makes this elbow the perfect solution for sidewall ventilation within a wall partition. UP #9 F 1/2 Stabilizing mounting clamps. Two inch wide galvanized steel bands lined with neoprene. an be used for suspended installation of fan. For use with rigid duct work (sold in pairs). F-1 connector kit for L or other uropean 1mm duct. F /1 1 /2 imensional information in inches. Pull-Out Hanging Tabs F F F F F F F -1 UP# 0 0 0 0 10 10 1 / F F UP# 90 90 Round metal elbows adjust from 0º to 90º. Ideal for installations where space is at a minimum. 1 /2 / 9 1 / 9 1 / Fantech I Your Ventilation Solutions ompany I 9
xterior Vents Roof aps R Roof ap with damper flap closure, duct connection and screened exhaust opening. Stainless steel or copper roof caps available by special order. all for more information. Soffit Vent UV Plastic soffit vent for use with or -inch duct. Note: Use F or F (shown on page 9) for installations where flex duct is used. UP #1 R R R R R R UP# 0 0 0 0 10 10 11 1 /2 1 1 1 2 9 1 1 1 20 / 1 / Material luminum Galvanized Steel Galvanized Steel Galvanized Steel Galvanized Steel Galvanized Steel uct connections are 1 / smaller than duct size. Outdoor Louvers & Weather Hoods OM P 1 / Louvered Vents HS Plastic louvered shutter with duct connection. 2 1 / Outdoor Louvers for duct (pair). Includes one supply and one exhaust louver. White plastic. F 1 1 / 1 / OM P UP# 20 9 1 / 1 / 1 / 9 1 / 11 /1 uct connections are 1 / smaller than duct size. OM/FML F F OM M Pair of metal outdoor hoods for duct. Includes one exhaust and one supply hood. Prepainted white aluminum. FML s include a single prepainted aluminum hood for exhaust applications. Sizes to fit to duct. HS W HS W HS W UP# 200 200 200 1 /2 1 /2 1 /2 / / uct connections are 1 / smaller than duct size. VK Plastic louvered shutter with duct connection. Includes tab collar for duct connection. F 1 /2 / / OM M FML FML FML UP# 2 211 20 I Fantech ccessories ook / 11 /1 / /1 /1 /1 1 /2 /1 1 1 / uct connections are 1 / smaller than duct size. 1 / 1 1 / VK 2 VK 0 VK UP# 200 20 20 11 1 /2 1 1 /2 1 1 /2 11 1 /2 1 1 /2 1 1 /2 1 /2 1 /2 1 1 /2 1 / 1 1 /2 1 /2 1 /2 uct connections are 1 / smaller than duct size. F 1 1 / 1 / F 9 1 /2 11 1 /2 1 1 /2
Range Hood Liners SHL/SGHL SHL Series range hood liners feature all stainless steel construction. SGHL liners feature stainless steel face with galvanized steel housing. oth styles have built-in infinite speed control for the fan, washable aluminum filters and dimmable halogen lights (purchase separately). SHL Series available in ", 2" and " widths. SGHL Series available in 0" and " widths. UL approved. Kitchen Ventilation the quiet, efficient way. FK Inline Fan Hot steam and odor exhausted through roof vent L Silencer Rigid uct SHL/SGHL Range Hood Liner RSK ackdraft amper Shown above: (front to back) SGHL 0, SGHL and SHL Shown right:typical range hood installation using Fantech s SHL/SGHL Range Hood Liner, RSK ackdraft amper, L Silencer and Inline Fan. Hood Liner can also be used with mounted fans. See chart for correct sizing information. Front of Hood immable Halogen Lights Speed/Light ontrols Front of Hood immable Halogen Lights Speed/Light ontrols Washable luminum Filters SHL Series imensional Information UP# SHL SHL 2 SHL 0 02 0 1 /2 0 1 /2 1 /2 uct connections are 1 / smaller than duct size. Recommended Fans for SHL Series Fan Use With Location Mounting irflow SHL (s) at 0" FX FX XL FX FX XL FK XL FK FK XL FK XL* RVF XL R XL R XL SHL /2 SHL /2 SHL SHL SHL /2 SHL SHL /2/ SHL SHL /2 SHL /2 SHL /2/ wall roof/wall roof/wall 1 21 21 90 9 201 09 1" Typical irflow 0 0 0 0 0 0 0 92 0 Typical airflow is an estimate based on a system with 20' of duct, two 90 elbows, a backdraft damper, roof cap and filters. * Requires larger speed control. ontact Fantech ustomer Service for recommendations. Washable luminum Filters SGHL Series imensional Information SGHL 0 SGHL UP# 0 2 1 /2 1 /2 1 1 uct connections are 1 / smaller than duct size. Recommended Fans for SGHL Series Fan Use With SGHL (s) Location Mounting irflow at 0" FX ** FX XL FX XL FK XL RVF ** RVF XL RVF XL R ** R XL R XL SGHL 0 SGHL 0/ SGHL 0/ SGHL SGHL 0 SGHL 0/ SGHL SGHL 0 SGHL 0/ SGHL wall wall wall roof/wall roof/wall roof/wall 2 92 21 1 09 Fantech I Your Ventilation Solutions ompany I 11 1" Typical irflow 190 2 20 0 200 0 92 20 0 Typical airflow is an estimate based on a system with 20' of duct, two 90 elbows, a backdraft damper, roof cap and filters. ** Fans will meet most local code requirements but will produce less than Fantech's recommended ventilation rate of 0 cfm per foot of hood width.
Index Supply/xhaust Grills ombination xhaust Grill & Light VL... 2 Fixed xhaust Grills G... 2 G... 2 G... 2 G... 2 djustable xhaust Grills MG... MG... MG... MG... MG... MG... PG... PG... PG... PG... PG... PG... djustable Supply Grills MGS... MGS... MGS... MGS... ontrols & Switches Pressure Switches... FPS... Variable Speed ontrollers RP... RP 1... RP 2... S... S... W 1... W 1H... W 2... Timers F 0M... F 0M... FL 0... RTS 2... ehumidistat ontroller FH 20... ttic Thermostat FT... ir Screen ontrollers S S... S TS... For more information contact: web: www.fantech.net e-mail: info@fantech.net United States 1 Northgate lvd. Sarasota, Florida 2 Phone: 00--; 91-09-000 Fax: 00--991; 91-09-099 HRV/RV ontrols Intellitek ontrol F... F2... ir Quality Sensor QS 1... ehumidistats MH 1... MH 2... Pressure Gauge MPG 0... uct Supplies Iris ampers IR... IR... IR... IR... IR... IR... IR 1... IR 20... IR 2... ackdraft ampers RSK... RSK... RSK... RSK... RSK... RSK... RSK 1... RSK 1... Lint Trap for ryer oosting LT... Sheet Metal dapters KR... KR... KR... FY... FY... FY... FY... FY... FY... Silencers For Round uct L... L... L... L... L... L... L 1... Roof urbs WI... I 1Q0... anada 0 Kanalflakt Way ouctouche, N S M Phone: 00--; 0--900 Fax: --11; 0--900 ircular uct lamps... 9... 9... 9 Mounting lamps F... 9 F... 9 F... 9 F... 9 F... 9 F... 9 F -1... 9 lbows F... 9 F... 9 FL... 9 Round Flexible uct FIT... 9 FIT... 9 FIT... 9 FIT... 9 FIT... 9 Inlet Guards IG... 9 IG... 9 IG... 9 IG... 9 IG... 9 IG... 9 xterior Vents Louvered Shutters HS W... HS W... HS W... VK 2... VK 0... VK... Roof aps R... R... R... R... R... R... Outdoor Hoods OM P... OM M... FML... FML... FML... Soffit Vents UV... Range Hood Liners SGHL 0... 11 SGHL... 11 SHL... 11 SHL 2... 11 SHL... 11 Fantech, reserves the right to modify, at any time and without notice, any or all of its products features, designs, components and specifications to maintain their technological leadership position. rt.# 0029 00 200 Fantech, Inc.ll Rights Reserved.