UNIVERSITY CONTACT: TOILET ACCESSORIES Custodial Services Residential Custodial Services Academic Custodial Services (302) 831-8469 (302) 831-3339 (302) 831-1815 GENERAL INFORMATION: 1. Rest room Fixtures: should be attached only to the walls where possible. Provide marine plywood behind toilets. 2. Trash Receptacles: should be wall surface mounted or free-standing, minimum 15-gallon for wall mounted and 22-gallon for free standing. 3. Sanitary Napkin Dispensers: should be wall surface mounted. Dispenser should dispense pads, shields and tampons. The maximum operating cost is $0.25. (Academic buildings and conference facilities only) 4. Soap Dispenser: should be twin pack and wall surface mounted, universal nipple, better adhered by tape and screwed. University will provide, but contractor should install. 5. Plumbing Fixtures Color: shall be white unless indicated otherwise. 6. Toilet Paper Dispensers: a. Academic: Shall be double roll with automatic refill, surface mounted provided and installed by the contractor. In high traffic areas (library, student center, stadium, etc) should be jumbo dispensers. University will provide the jumbo dispenser and contractor to install. b. Residential: Kimberly Clark Escort (grey). 7. Roll Towel Dispensers: should be surface mounted. University will provide the dispenser and contractor to install. 8. Refer to CSI section 06100 for mounting requirements. 9. Paper towel, toilet paper and soap dispenser finishes are to match. APPROVED MANUFACTURERS: 1. Toilet Paper Dispensers: a. Non-heavy use Academic rest rooms and handicap stalls - Kimberly- Clark 960 Contin-U-Matic double roll dispenser with automatic refill provided by contractors. b. Heavy use rest rooms (Classroom buildings, Student Center, etc.) Kimberly -Clark IN-SIGHT Series i JRT Jumbo Roll Tissue Dispenser #09612 REV 1/08-1- fds\pdf\buildingservices\toiletaccessories.pdf
c. Residence Halls: Kimberly- Clark JRT ESCORT Dispenser #09686 2. Sanitary Napkin Dispensers: Rochester Midland, Model CARE 111-J-10, white enamel Use only the following standard keys: CR-8 coin CR-28 outside lock 3. Roll Towel Dispensers: Kimberly-Clark #09707 Lev-R-Matic roll-towel dispenser Kimberly-Clark #09717 Convert-A-Matic roll-towel dispensers, (recessed fixtures only) Kimberly-Clark #9755 Capacitor roll-towel dispensers, (very high traffic areas only); 4. Soap Dispensers: Kimberly -Clark #92557 Push twin-pak dispensers 5. Trash Receptacles: Wall mounted: Rubbermaid, #7822 Beige 15 gallon w/o ashtray Freestanding: Rubbermaid, Series 3546, Beige DO S AND DON TS DO S: DON TS: DO Review selections with Custodial Services. DO Specify that paper towels, soap & jumbo toilet paper dispensers will be provided by University of Delaware. The contractor is responsible for installation. DO Provide hand dryers in residential buildings. DO NOT Provide any recessed accessories unless otherwise approved by University of Delaware. DO NOT Provide hand dryers in academic buildings unless otherwise approved by UNIVERSITY OF DELAWARE. NOTE: ATTACHED ARE PRODUCT DATA SHEETS. -- END OF SECTION -- REV 1/08-2- fds\pdf\buildingservices\toiletaccessories.pdf
Toilet Tissue Dispensers Product Code: 09600 Name: PERFORMA CONTIN-U-MATIC Bathroom Tissue Dispenser Size(LxWxH): 6"x11.13"x5.69" Unit/Case: 6 Product Code: 09612 Name: IN-SIGHT Series i JRT Jumbo Roll Tissue Dispenser Size(WxHxD): 13.88"x16'x5.75" Unit/Case: 1. Suggested Mounting Height: 30" REV 1/08-3- fds\pdf\buildingservices\toiletaccessories.pdf
Toilet Tissue Dispensers JRT ESCORT Dispenser #09686 High-impact grey plastic body and smoked transparent cover. Dispenses one standard 13" diameter x 3.8" wide tissue roll with 3.25" diameter core, plus stub roll. Holds more than the equivalent in length of ten standard rolls. Design minimizes run-out, waste, and maintenance time. Features hinged front cover and key lock to reduce pilferage and tear-off bars on sides and front of dispensing opening. 1 per case. Suggested Mounting Height: 30" REV 1/08-4- fds\pdf\buildingservices\toiletaccessories.pdf
Sanitary Napkin Machines Our J10-RC White Enamel Vendor dispenses a full line of feminine hygiene products: napkins, tampons, and pantyshields. The vendor can also be converted to dispensing napkins and tampons only. Features: All-metal, all-welded construction Rounded corners Attractive 'refrigerator' finish Easy to mount Individual, die-cast coin mechanisms ADA compliant handles Silk-screened graphics Most trouble-free vendors on the market today Specs: Product Code: 25166200 Capacity: 16 Napkins/34 Pantyshields/24 Tampons or 32 Napkins/24 Tampons if converted Specifications: 15 1/2" W x 31¼" H x 5½" D Shipping Weight (each): 28 lbs., 1.93 cubes Replaces Competitor Vendor: No equal Keys: CR 8 Coin CR 28 Outside Lock REV 1/08-5- fds\pdf\buildingservices\toiletaccessories.pdf
Kimberly Clark Handtowel Dispensers 09755 LEV-R-MATIC Dispenser #09707 Pearl White Made of steel top and body with baked enamel finish and high impact plastic front cover. Front cover includes provision for custom deco strip. Dispenses one 8" and one 3.5" diameter roll with 1.5" diameter cores. Features key-activated spring lock or pushbutton operation, lever-operated dispensing mechanism with adjustable sheet length, and automatic transfer system. 1 per case. Suggested Mounting Height: 44" CONVERT-A-MATIC Dispenser # 09717 Pearl White Made of 20-gauge steel body with baked enamel finish and high-impact plastic front cover. Dispenses one 8" diameter roll and one 3" diameter stub roll with 1.5" diameter cores. Features lever-operated dispensing mechanism, key lock and automatic transfer system. Front cover includes provision for custom deco strip. Fits most 12" or 15" wide recessed folded towel dispensers with 4" minimum depth. 1 per case. REV 1/08-6- fds\pdf\buildingservices\toiletaccessories.pdf
Kimberly Clark Handtowel Dispensers CAPACITOR Dispenser #09755 Smoked Grey Steel top and body with grey baked enamel finish and smoked transparent front cover of high-impact plastic. Holds two 8" diameter x 8" wide rolls with 1.5" diameter cores. Features key activated spring lock or push button operation, lever-operated dispensing mechanism, change indicator, automatic transfer to second roll and interlock device to prevent simultaneous dispensing of both rolls. 1 per case. Suggested Mounting Height: 40" I N - S I G H T D I S P E N S E R S REV 1/08-7- fds\pdf\buildingservices\toiletaccessories.pdf
Kimberly Clark Hand Soap Dispenser TWINPAK Push Dispenser #92557 Pearl White Sleek, contemporary design made of high-impact plastic. Holds two 500mL cartridges of soap, virtually eliminating run out. Each refill includes a new pump and is designed to distribute soap every time by a simple push of a lever. Front cover includes provision for custom deco strip. Features keyless lock system and push-lever for easy, one-handed operation. 1 per case. Suggested Mounting Height: to 10" above counter or sink REV 1/08-8- fds\pdf\buildingservices\toiletaccessories.pdf
Rubbermaid Trash Receptacles Wall Mounted #7822 Profile Series Container - Beige REV 1/08-9- fds\pdf\buildingservices\toiletaccessories.pdf
Rubbermaid Trash Receptacles Freestanding #3546 Beige RCP#: 3546 Round Container Dimensions: 15 3/4" dia x 30 1/8" h 40 cm x 76.5 cm Shipping Weight: 27.6 12.5 Carton Cube: 8.61 0.24 Cartons Per Pallet: 9 Pack Quantity: 4 Origin: N/A Capacity Metric: 83.3 L Capacity US: 22 U.S. gal Polyliner Bags: 5004-88 Shipping Origin: Arizona, USA Virginia, USA List Price: $39.96 Color Product UPC Case UPC BG 086876023459 086876523454 LG 086876023480 086876523485 REV 1/08-10- fds\pdf\buildingservices\toiletaccessories.pdf