Repair Parts List DRYER MODEL NUMBER MDG30PN3AW When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005 Maytag Services
Section: CONTROL PANEL ASSEMBLY (PN3) Model: MDG30PN3AW MAN1280 1
Section: CONTROL PANEL ASSEMBLY (PN3) No. Part No. Description Series Qty - ------ NOT REQUIRED PART OR SEE NOTE Note: ORDER PARTS FROM AMERICAN DRYER CORP AT 0 508-678-9000. 1 A112276 LABELS, STICK-ON Note: LABELS, OPL (STICK-ON) (ENGLISH ONLY) 1 1 A112535 LABEL ASSY., KEYBOARD Note: LABEL, OPL KEYBOARD (ENGLISH) 1 - A801206 MICROPROCESSOR, CNTL PNL ASSY. Note: MICROPROCESSOR, PHASE 5 (OPL) (NON- REVERSING) 1 1 A112277 LABELS, STICK-ON (3-LANGUAGE) Note: LABELS, OPL (STICK-ON) (ENGLISH, SPANISH & 1 HEBREW) 2 A801256 PANEL, CONTROL (W/BATT. BRKT) Note: PANEL, CONTROL (PHASE 5, MICRO. 1 W/BATTERY BRACKET) 2 A801255 PANEL, CONTROL ONLY Note: PANEL, CONTROL (PHASE 5, MICROPROCESSOR) 1 3 A824998 HARNESS, CLIP (9V BATTERY) Note: CLIP (PHASE 5 BATTERY) 1 3 A137222 CONTROLLER, NON-REVERSING Note: CONTROLLER (PHASE 5 OPL NON- 1 REVERSING) 4 A153010 WASHER, STAR (#6) Note: WASHER, STAR (#6) 2 5 A150005 SCREW, PHILL (6-32 X 1/4")RND Note: SCREW, MACHINE (#6-32 X 1/4") 2 6 A150309 SCREW, CRIMPTITE 1 7 A130648 FUSE (SLO BLO 1/8 AMP) 1 - ------ NOT REQUIRED PART OR SEE NOTE Note: IMPORTANT: CHECK LABEL ON COMPUTER CHIP 0 TO VERIFY PART NUMBER OF CONTROLLER. *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 2
Section: CONTROL BOX ASSEMBLY Model: MDG30PN3AW MAN0969 3
Section: CONTROL BOX ASSEMBLY No. Part No. Description Series Qty - ------ NOT REQUIRED PART OR SEE NOTE Note: ORDER PARTS FROM AMERICAN DRYER CORP AT 0 508-678-9000. 1 A141403 TRANSFORMER (DSI 24 VAC) Note: TRANSFORMER, DSI (24 VAC) 1 2 A150300 SCREW (#10-32 X 1/2" PH ROUND Note: SCREW, TEK (#10 X 1/2") 2 3 A120715 BLOCK, TERMINAL (30-POSITION) Note: BLOCK, TERMINAL (30 POSITION) 1 4 A150002 SCREW, MACHINE (RD.HD.) Note: SCREW (#6-32 X 1") 2 5 A151000 PAL NUT (#6-32) Note: NUT, PAL (#6-32) 2 9 A122641 CONNECTOR, MICROPROCESSOR Note: CONNECTOR, MICROPROCESSOR (15 PIN) 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 4
Section: COIN VAULT ASSEMBLY Model: MDG30PN3AW MAN0271 5
Section: COIN VAULT ASSEMBLY No. Part No. Description Series Qty - ------ NOT REQUIRED PART OR SEE NOTE Note: ORDER PARTS FROM AMERICAN DRYER CORP AT 0 508-678-9000. 7 A102502 ROD, SUPPORT (CONTROL DOOR) Note: ROD, SUPPORT (CONTROL DOOR) 1 8 A102601 CLIP, ROD RETAINER-CTRL. DOOR Note: CLIP, RETAINER (CONTROL DOOR ROD) 1 9 A102603 CATCH, ROD SUPPORT-CTRL. DOOR Note: CATCH, CONTROL DOOR ROD 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 6
Section: ELECTRICAL RELAY PANEL ASSEMBLY Model: MDG30PN3AW MAN0977 7
Section: ELECTRICAL RELAY PANEL ASSEMBLY No. Part No. Description Series Qty - ------ NOT REQUIRED PART OR SEE NOTE Note: ORDER PARTS FROM AMERICAN DRYER CORP AT 0 508-678-9000. 1 A132475 CONTACTOR Note: CONTACTOR, 2-POLE (24 VAC) 1 2 A150299 SCREW, TEK (#10 X 1") Note: SCREW, TEK (#10 X 1") 2 3 A824828 RC NETWORK W/CONNECTOR Note: NETWORK, RC W/CONNECTORS 1 - A322809 COVER, ELECTRICAL BOX (REAR) 1 - A150301 SCREW, TEK (#8-18 X 7/16 PH Note: SCREW (#8-18 X 7/16") 4 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 8
Section: CABINET Model: MDG30PN3AW MAN0983 9
Section: CABINET No. Part No. Description Series Qty - ------ NOT REQUIRED PART OR SEE NOTE Note: ORDER PARTS FROM AMERICAN DRYER CORP AT 0 508-678-9000. 1 A322809 COVER, ELECTRICAL BOX (REAR) Note: COVER, ELECTRICAL BOX (REAR) 1 2 A150301 SCREW, TEK (#8-18 X 7/16 PH Note: SCREW, TEK (#8-18 X 7/16") 4 3 A330077 GUARD, BACK (UPPER) 1 4 A150301 SCREW, TEK (#8-18 X 7/16 PH Note: SCREW, TEK (#8-18 X 7/16") 7 5 A150301 SCREW, TEK (#8-18 X 7/16 PH Note: SCREW, TEK (#8-18 X 7/16") 10 6 A312510 GUARD, TOP (OUTER) 1 7 A314513 GUARD, BACK (LOWER) 1 8 A150301 SCREW, TEK (#8-18 X 7/16 PH Note: SCREW, TEK (#8-18 X 7/16") 13 9 A103500 LEG, LEVELING (ADJUSTABLE) 4 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 10
Section: CABINET - CONTROL DOOR ASSEMBLY Model: MDG30PN3AW MAN0516 11
Section: CABINET - CONTROL DOOR ASSEMBLY No. Part No. Description Series Qty - ------ NOT REQUIRED PART OR SEE NOTE Note: ORDER PARTS FROM AMERICAN DRYER CORP AT 0 508-678-9000. 1 A160017 LOCK, SPECIAL DUMMY Note: LOCK, SPECIAL DUMMY 1 1 A160104 KEY, LOCK (MK-100/MASTER KEY) Note: KEY, DUMMY LOCK (M/K-100) 1 2 A160014 CAM, LOCK Note: CAM, LOCK (NON-COIN MODELS) 1 3 A112343 LOGO, MAYTAG (ONLY) Note: LOGO, MAYTAG 1 3 A870011 TAPE KIT (DOUBLE SIDED) Note: TAPE KIT, LOGO (DOUBLE SIDED) 1 4 A800023 DOOR ASSY, CONTROL Note: (INCLUDES 4, 5, 6 & 7) 1 5 A150201 SCREW, MACHINE (#10-32 X 1/4") Note: SCREW, MACHINE (#10-32 X 1/24) 5 6 A117603 TAPE, SUPPRESSOR Note: GASKET, TRIM BUMPER (SOLD IN FEET) 3 7 A180200 TRIM, TOP STRIP Note: TRIM, TOP STRIP (W/LOCK HOLE..38-14" LENGTH) 1 8 A150300 SCREW (#10-32 X 1/2" PH ROUND Note: SCREW, CRIMPTITE (10-32 X 1/2) 4 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 12
Section: CABINET - FRONT PANEL ASSEMBLY Model: MDG30PN3AW MAN0965 13
Section: CABINET - FRONT PANEL ASSEMBLY No. Part No. Description Series Qty - ------ NOT REQUIRED PART OR SEE NOTE Note: ORDER PARTS FROM AMERICAN DRYER CORP AT 0 508-678-9000. 1 A875300 PANEL ASSEMBLY (SPECIFY COLOR) Note: (INSULATED, LATCH TYPE INCLUDES 1, 2, 3 & 6) 1 2 A154215 RIVET, POP (5/32") Note: RIVET, POP (5/32") 2 3 A170330 LATCH, DOOR (FRICTION) Note: LATCH, DOOR (FRICTION) 1 4 A150300 SCREW (#10-32 X 1/2" PH ROUND Note: SCREW, TEK (#10 X 1/2") 1 5 A150309 SCREW, CRIMPTITE Note: (#10-16 X 1/2" PH RND HD) 8 6 A121405 GROMMET, RUBBER 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 14
Section: CABINET - LINT DOOR ASSEMBLY Model: MDG30PN3AW MAN1654 15
Section: CABINET - LINT DOOR ASSEMBLY No. Part No. Description Series Qty - ------ NOT REQUIRED PART OR SEE NOTE Note: ORDER PARTS FROM AMERICAN DRYER AT 508-0 678-9000. 1 A160001 LOCK ASSY. W/KEY 1 1 A160103 KEY (AD-100) 1 2 A160014 CAM, LOCK 1 3 A800233 LINT DOOR ASY. (INSULATED) Note: (INCLUDES 4, 5, 6, 7 & 8) 1 3 A800216 LINT DOOR ASY. (NON-INSULATED) Note: (INCLUDES 4, 5, 6, 7 & 8) 1 4 A150201 SCREW, MACHINE (#10-32 X 1/4") Note: SCREW, MACHINE (#10-32 X 1/4") 10 5 A117604 TAPE, FOAM (SOLD IN FEET) Note: TAPE, NOISE SUPPRESSOR (SOLD IN FEET) 7 6 A117603 TAPE, SUPPRESSOR Note: GASKET, TRIM BUMPER (SOLD IN FEET) 3 7 A180210 TRIM/KICKPLATE 2 8 A150419 SCREW, TEK (#6 X 1/2") Note: SCREW, TEK (#6 X 1/2") 2 9 A108120 CHAIN, LINT DOOR (10 1/2") 1 - A150418 TOOL, HAND DRIVER Note: TOOL, HAND DRIVER 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 16
Section: DOOR ASSEMBLY Model: MDG30PN3AW MAN2944 17
Section: DOOR ASSEMBLY No. Part No. Description Series Qty - ------ NOT REQUIRED PART OR SEE NOTE Note: ORDER PARTS FROM AMERICAN DRYER CORP AT 0 508-678-9000. 1 A881427 DOOR ASSEMBLY (ALM) Note: DOOR ASSEMBLY (ALM) 1 - A103062 HINGE PIN 20 2 - A882963 DOOR FRAME (METAL) 20 1 2 A800448 HINGE, MAIN DOOR (12 1/2") Note: HINGE ASSEMBLY (#12-1/2") 1 3 A150309 SCREW, CRIMPTITE Note: SCREW, TAPTITE (10-24 X 3/8") 4 4 A152014 NUT, FREE SPIN WASH (#20-1/4) Note: NUT, WASHER (FREE SPIN) 4 5 A170730 ADHESIVE, DOOR GLASS (10.3 OZ) Note: ADHESIVE, DOOR GASKET (10.3 OZ. CARTRIDGE) 1 5 A102349 GASKET, DOOR Note: GASKET, DOOR (69 1/2") 1 6 A102212 GLASS, DOOR (20-7/16") Note: GLASS, DOOR (20 7/16") 1 6 A170730 ADHESIVE, DOOR GLASS (10.3 OZ) Note: ADHESIVE, DOOR GLASS (10.3 OZ. CARTRIDGE) 1 7 A150431 SCREW (#10 X 7/16" DOME HD) Note: (#10 X 7/16" DOME HEX HD) 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 18
Section: MAIN DOOR SWITCH HOUSING Model: MDG30PN3AW MAN0934 19
Section: MAIN DOOR SWITCH HOUSING No. Part No. Description Series Qty - ------ NOT REQUIRED PART OR SEE NOTE Note: ORDER PARTS FROM AMERICAN DRYER CORP A 0 508-678-9000. DRYER CORP AT 508-678-9000. 1 A152013 NUT, HEX (#6-32) Note: NUT, HEX (#6-32) 2 2 A153008 WASHER, SPLIT LOCK (#6) 2 3 A137005 SWITCH, DOOR (SINGLE POLE) Note: SWITCH, DOOR (SINGLE POLE) 1 4 A121028 TERMINAL, 1/4" INSUL. (FEMALE) Note: TERMINAL, INSULATED (FEMALE) 2 5 A154281 SPACER, NYLON (3/8") Note: SPACERS, STANDARD NYLON (3/8") 2 6 A800448 HINGE, MAIN DOOR (12 1/2") Note: HINGE ASSEMBLY (12 1/2") (INCLUDES 6 & 7) 1 7 A153565 STUD, SELF-CLINCHING (#6-32X1) Note: STUD, SELF-CLINCHING (#6-32X1) 2 8 A313218 HOUSING, MAIN DOOR SWITCH Note: HOUSING, MAIN DOOR SWITCH 1 9 A150201 SCREW, MACHINE (#10-32 X 1/4") Note: SCREW, MACHINE (#10-31 X 1/4) 2 10 A121405 GROMMET, RUBBER 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 20
Section: LINT TRAP ASSEMBLY Model: MDG30PN3AW MAN0275 21
Section: LINT TRAP ASSEMBLY No. Part No. Description Series Qty - ------ NOT REQUIRED PART OR SEE NOTE Note: ORDER PARTS FROM AMERICAN DRYER CORP AT 0 508-678-9000. 1 A880914 LINT TRAP ASSEMBLY (SUPER 30) 1 1 A880913 TRAP, LINT (SUPER 30) Note: (INCLUDES 1, 3, 4 & 5) 1 2 A154200 POP RIVET (5/32") Note: RIVET, POP (5/32") 7 3 A150300 SCREW (#10-32 X 1/2" PH ROUND Note: SCREW, TEK (#6 X 1/2") 3 4 A304100 HOLDER, LINT SCREEN 1 5 A800500 SCREEN, LINT 2 6 A150419 SCREW, TEK (#6 X 1/2") Note: SCREW, TEK (#6 X 1/2") 2 7 A108120 CHAIN, LINT DOOR (10 1/2") Note: (10 1/2" LENGTH) 1 - A150418 TOOL, HAND DRIVER 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 22
Section: TUMBLER & SUPPORT ASSEMBLY Model: MDG30PN3AW MAN0309 23
Section: TUMBLER & SUPPORT ASSEMBLY No. Part No. Description Series Qty - ------ NOT REQUIRED PART OR SEE NOTE Note: ORDER PARTS FROM AMERICAN DRYER CORP AT 0 508-678-9000. 1 A800703 TUMBLER W/O FELT COLLAR 1 1 A800803 TUMBLER & SUPPORT ASSY 1 2 A150309 SCREW, CRIMPTITE Note: (#10-16 X 1/2") (#10-16 X 1/2") 40 3 A301304 RIB, TUMBLER 4 4 A150518 SCREW, SOCKET HEAD Note: SCREW (#18-5/16" X 3/8") 1 5 A882050 ROD, TIE Note: ROD, TIE (#18-5/16" X 31") 4 6 A153001 WASHER, FLAT (5/16") Note: WASHER, FLAT (5/16") 4 7 A800603 SUPPORT, TUMBLER Note: SUPPORT, TUMBLER 1 8 A152004 NUT, HEX (#18-5/16) Note: NUT, HEX (#18-5/16") 4 9 A153002 WASHER, LOCK (5/16") Note: WASHER, LOCK (5/16") 4 10 A153001 WASHER, FLAT (5/16") Note: WASHER, FLAT (5/16") 4 11 A116002 COLLAR, FELT 1 - A401010 ADHESIVE, FELT COLLAR #847 Note: ADHESIVE, FELT COLLAR (#847) 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 24
Section: SENSOR BRACKET ASSEMBLY Model: MDG30PN3AW MAN0489 25
Section: SENSOR BRACKET ASSEMBLY No. Part No. Description Series Qty - ------ NOT REQUIRED PART OR SEE NOTE Note: ORDER PARTS FROM AMERICAN DRYER CORP AT 0 508-678-9000. 1 A880251 PROBE ASSY., TEMP. (1/4") Note: PROBE, TEMPERATURE SENSOR (1/4" INCLUDES 1, 5 6, 7 & 1 8) 2 A130301 THERMOSTAT (225 DEGREE) Note: THERMOSTAT (LG 225 DEG.) 1 3 A153010 WASHER, STAR (#6) Note: WASHER, STAR (#6) 2 4 A152000 NUT, HEX (#6-32) Note: NUT, HEX (#6-32) 2 5 A121028 TERMINAL, 1/4" INSUL. (FEMALE) Note: TERMINAL, INSULATED 2 6 A122701 TERMINAL, SOCKET (ONLY) Note: TERMINAL, SOCKET 4 7 A122605 CONNECTOR, 4-PIN SOCKET Note: CONNECTOR (4 PIN SOCKET) 1 7 A122801 TOOL, EXTRACTION (PIN/SOCKET) Note: TOOL, EXTRACTION (PIN/SOCKET) 1 8 A154007 FASTENER, PUSH-ON (1/4") Note: FASTENER, PUSH-ON (1/4") 2 9 A150005 SCREW, PHILL (6-32 X 1/4")RND Note: SCREW (#6-32 X 1/4" RD HD) 2 10 A801425 SENSOR BRACKET ASY. Note: SENSOR BRACKET ASY. 1 10 A305007 BRACKET, SENSOR Note: BRACKET, SENSOR (MICROPROCESSOR SENSOR.. 1 INCLUDES 1-10) 11 A122604 CONNECTOR (4 PIN) Note: CONNECTOR (4 PIN) 1 12 A122700 TERMINAL, PIN Note: TERMINAL, PIN 4 13 A150301 SCREW, TEK (#8-18 X 7/16 PH Note: SCREW (#8-18 X 7/16") 2 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 26
Section: IDLER BEARING ASSEMBLY Model: MDG30PN3AW MAN0241 27
Section: IDLER BEARING ASSEMBLY No. Part No. Description Series Qty - ------ NOT REQUIRED PART OR SEE NOTE Note: ORDER PARTS FROM AMERICAN DRYER CORP AT 0 508-678-9000. 1 A100108 V-BELT, IDLER TO TUMB. (5L680) Note: BELT, IDLER (5L680 V) 1 2 A101129 PULLEY W/KEY(9" X 2 1/2") Note: PULLEY (9" X 2 1/2") 1 3 A100110 BELT, IDLER (4L500 V) 1 4 A154301 SCREW, ALLEN (#18-5/16 X 5/16) Note: SCREW (18-5/16" X 5/16") 2 5 A100705 KEY (3/16" X 3/16" X 1-3/8") 1 6 A301850 SHAFT, IDLER (5/8" X 3/4") Note: SHAFT, IDLER (5/8" X 3/4") 1 7 A152002 HEX NUT (#20-1/4") Note: NUT, HEX (#20-1/4") 3 8 A153007 WASHER, LOCK (1/4") Note: WASHER, LOCK (1/4") 3 9 A880214 BEARING, FLANGE (5/8) Note: BEARING, FLANGE (5/8") 2 10 A150521 BOLT, CARRIAGE (#20-1/4 X 2") Note: BOLT, CARRIAGE (#20-1/4" X 2") 3 11 N A801007 IDLER BEARING ASSEMBLY Note: IDLER BEARING ASSEMBLY (INCLUDES 5-17) 1 12 A150617 BOLT, MACHINE (#16-3/8 X 1") Note: BOLT, MACHINE (#16-3/8 X 1") 2 13 A153005 WASHER, LOCK (3/8") Note: WASHER, LOCK (3/8") 2 14 A153004 WASHER, FLAT (3/8") Note: WASHER, FLAT (3/8") 2 15 A801009 WASHER, IDLER (SQ) Note: WASHER, IDLER (SQ) 1 16 A152004 NUT, HEX (#18-5/16) Note: NUT, HEX (#18-5/16") 1 17 A150509 BOLT, MACHINE (5/16-18 X 3") Note: BOLT, MACHINE (#18-5/16" X 3") 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 28
Section: MOTOR & MOUNT ASSEMBLY Model: MDG30PN3AW MAN0778 29
Section: MOTOR & MOUNT ASSEMBLY No. Part No. Description Series Qty - ------ NOT REQUIRED PART OR SEE NOTE Note: ORDER PARTS FROM AMERICAN DRYER CORP AT 0 508-678-9000. 1 A100110 BELT, IDLER (4L500 V) 1 2 A100701 KEY (3/16" X 3/16") 1 3 A101132 PULLEY, MOTOR (5/8" X 2") Note: (USED ON 1HP. 60HZ MOTORS) 1 4 A150501 BOLT, MACHINE (#18-5/16 X 3/4) Note: BOLT, MACHINE HEX HD (#18-5/16" X 3/4") 4 5 A153002 WASHER, LOCK (5/16") Note: WASHER, LOCK (5/16") 4 6 A153001 WASHER, FLAT (5/16") Note: WASHER, FLAT (5/16") 4 7 A100073 MOTOR W/PLUG Note: MOTOR W/PLUG (1HP, 60HZ, 10 T.E.F.C.) 1 8 A122801 TOOL, EXTRACTION (PIN/SOCKET) Note: TOOL, EXTRACTION (PIN/SOCKET) 1 8 A122701 TERMINAL, SOCKET (ONLY) Note: SOCKET, TERMINAL 8 9 A137030 HOUSING (8 PIN) Note: CONNECTOR (8-PIN HOUSING) 1 10 A152004 NUT, HEX (#18-5/16) Note: NUT, HEX (#18-5/16") 4 11 A153002 WASHER, LOCK (5/16") Note: WASHER, LOCK (5/16") 4 12 A153001 WASHER, FLAT (5/16") Note: WASHER, FLAT (5/16") 4 13 A117604 TAPE, FOAM (SOLD IN FEET) Note: TAPE, NOISE SUPPRESSOR (SOLD IN FEET) 4 14 A154000 NUT (#18-5/16") Note: NUT (#18-5/16") 4 15 A803996 MOTOR & MOUNT ASSY (W/PLUG) Note: MOUNT, MOTOR W/PLUG (1HP, 115V, 60HZ, 10, 1 T.E.F.C. INCLUDES 3-7 & 13-20) 15 A800919 MOUNT, MOTOR (1HP 56Z FRAME) Note: MOUNT, MOTOR (1HP 56Z FRAME) 1 16 A153051 WASHER, FLAT (3/4" S.A.E.) Note: WASHER, FLAT (3/4" S.A.E.) 2 17 A100603 IMPELLER (16" WITH 3/4" BORE) 1 18 A100702 KEY (1/8" X 1/8" X 1 1/2") 1 19 A153050 WASHER, FLAT (1/2") Note: WASHER, FLAT (1/2"S.A.E.) 2 20 A152006 NUT, JAM (#20-1/2" LT-HAND) Note: JAM NUT (LT HAND #20-1/2") 2 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 30
Section: DSI & BURNER ASSEMBLY Model: MDG30PN3AW MAN5331 31
Section: DSI & BURNER ASSEMBLY No. Part No. Description Series Qty - ------ NOT REQUIRED PART OR SEE NOTE Note: ORDER PARTS FROM AMERICAN DRYER CORP AT 0 508-678-9000. 1 A318030 SHIELD, DSI BURNER Note: SHIELD, DSI BURNER 1 2 A150300 SCREW (#10-32 X 1/2" PH ROUND Note: SCREW, TEK (#10 X 1/2" WASHER) 2 3 A150309 SCREW, CRIMPTITE Note: (#10-16 X 1/2" PH RND HD) 2 4 A880134 IGNITER/FLAME PROBE KIT ASSY. Note: IGNITER/FLAME PROBE KIT ASSY. (INCLUDES 4 & 5) 1 5 A880330 CONNECTOR, IGNITOR HV WIRE Note: CONNECTOR ASSEMBLY W/HV WIRE 1 6 A150103 SCREW, MACHINE (#8-32 X 3/4" Note: SCREW, MACHINE (#8-32 X 1/2") 3 7 A153000 STEEL BURR (#8) Note: BURR, STEEL (#8) 3 8 A151001 NUT, PAL (#8-32) Note: NUT, PAL (#8-32) 3 9 A141105 BURNER, TUBE (LARGE) Note: BURNER, TUBE (LARGE) 3 10 A140823 ORIFICE, BURNER (NAT #26) 3 10 A140808 ORIFICE, BURNER (LP #44) 3 11 A141232 MANIFOLD, DSI (3-PORT 1/2") 1 12 A318700 BRACKET, PIPE (BENT) Note: BRACKET, PIPE (BENT) 1 13 A150300 SCREW (#10-32 X 1/2" PH ROUND Note: WASHER, HEX (#10 X 1/2") 2 14 A140411 CONVERSION KIT, GAS VALVE Note: VALVE, CONVERSION KIT (1/2"LP) 1 14 A128927 VALVE, REDUNDANT (1/2" 24VAC) Note: VALVE, GAS (REDUNDANT) (1/2" 24 VAC, NATURAL 1 GAS) 15 A881367 UNION, SHUT-OFF (1/2") Note: BODY, UNION SHUT-OFF 1 - A142707 NIPPLE (1/2" X 1-1/2") 16 1 - A142800 PIPE, 1/2 " X 18" B.I. 16 1 16 A142809 PIPE (1/2" X 29 1/8") 1 - A142600 UNION (1/2") 16 1 - A142500 1/2" X 90 DEGREE ELBOW 16 1 17 A150309 SCREW, CRIMPTITE Note: (#10-16 X 1/2" PH RND HD) 4 18 A318700 BRACKET, PIPE (BENT) Note: BRACKET, PIPE (BENT) 2 19 A809627 BURNER ASSEMBLY (LESS ORIFICE) Note: (NATURAL GAS) 1 19 A809628 BURNER ASSEMBLY (LESS ORIFICE) Note: (L.P. GAS) 1 19 A850852 BOX, BURNER (NON HEAT RCLMR) 1 20 A880815 MODULE, DSI Note: MODULE, DSI (50HZ/60HZ) 1 21 A150299 SCREW, TEK (#10 X 1") Note: SCREW, TEK (#10-1" HEX WSHR) 4 - A140411 CONVERSION KIT, GAS VALVE 1 - A410001 WRENCH, ALLEN (1/2") Note: WRENCH, ALLEN (1/2") 1 - ------ NOT REQUIRED PART OR SEE NOTE Note: NOTE: CONSULT FACTORY FOR ELEVATIONS 0 OVER 2000 FT. *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 32
Section: SAIL SWITCH/HI-LIMIT ASSEMBLY Model: MDG30PN3AW MAN0761 33
Section: SAIL SWITCH/HI-LIMIT ASSEMBLY No. Part No. Description Series Qty - ------ NOT REQUIRED PART OR SEE NOTE Note: ORDER PARTS FROM AMERICAN DRYER CORP AT 0 508-678-9000. 1 A154004 NUT, TWIN SPEED Note: NUT, TWIN SPEED 1 2 A150309 SCREW, CRIMPTITE Note: (#10-16 X 1/2") 2 3 A802799 COVER, SAIL SWITCH BOX W/BRKT. Note: BOX COVER & BRKT, SAIL SWITCH 1 4 A150303 SCREW (#4 X 3/4") 2 5 A122200 SWITCH, SAIL Note: SWITCH, SAIL 1 6 A105500 ROD, SAIL SWITCH ACTUATOR Note: ROD, ACTUATOR (SAIL SWITCH) 1 7 A319202 DAMPER, SAIL SWITCH (FLAT) Note: DAMPER, SAIL SWITCH (FLAT) 1 8 A154002 FASTENER, PUSH-ON (1/8") 1 9 A802800 BOX, SAIL SWITCH (ONLY) Note: BOX, SAIL SWITCH (W/COVER & BRACKET) 1 9 A802801 BOX, SAIL SWITCH ASSY Note: BOX ASSEMBLY, SAIL SWITCH (INCLUDES 1-8) 1 10 A142809 PIPE (1/2" X 29 1/8") 1 11 A150309 SCREW, CRIMPTITE Note: (#10-16 X 1/2") 2 12 A319704 BRACKET, HI-LIMIT MOUNTING Note: BRACKET, HI-LIMIT MOUNTING 1 13 A151000 PAL NUT (#6-32) Note: NUT, PAL (#6-32) 2 14 A151001 NUT, PAL (#8-32) Note: SCREW (#6-32 X 1/2") 2 15 A130201 HI-LIMIT Note: HI-LIMIT (330 DEG.) 1 16 A143000 COUPLING, REDUCING (1/2"X3/4") 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 34
Section: TUMBLER BEARING ASSEMBLY Model: MDG30PN3AW MAN5330 35
Section: TUMBLER BEARING ASSEMBLY No. Part No. Description Series Qty 0 ------ NOT REQUIRED PART OR SEE NOTE Note: ORDER PARTS FROM AMERICAN DRYER CORP AT 0 508-678-9000 1 A100244 BEARING, FLANGE (1 15/16") 1 2 A153025 LOCK WASHER (9/16") 4 3 A152050 HEX NUT (#9/16-12) 4 4 A801775 PILLOW BLOCK BEARING ASSEMBLY Note: (INCL ITEM #'S 4 THRU 13) 1 4 A801761 HOUSING, BEARING 1 5 A100245 BEARING, PILLOW BLOCK 1 6 A150633 BOLT, HEX HEAD (2 1/4") 2 7 A153011 WASHER, FLAT (9/16") 2 8 A153011 WASHER, FLAT (9/16") Note: (AS REQUIRED) 2 9 A153026 WASHER, LOCK (1/2") 2 10 A152011 NUT, HEX (#1/2-13) 2 11 A154322 SCREW (3/8 X 7/16) 2 12 A152004 NUT, HEX (#18-5/16) 2 13 A150621 BOLT, MACHINE (#18-5/16X1 1/2) 2 14 A153002 WASHER, LOCK (5/16") 4 15 A153001 WASHER, FLAT (5/16") 6 16 A150621 BOLT, MACHINE (#18-5/16X1 1/2) 4 17 A101219 PULLEY, 18" (REVERSING) 1 17 A101100 PULLEY (18") Note: PULLEY, 18" (NON-REVERSING) 1 18 A101220 BUSHING, TAPER LOCK (1 15/16) 1 19 A100719 KEY (1/2 X 1/2 X 1 3/8) 1 20 A100135 BELT, V 1 21 A152004 NUT, HEX (#18-5/16) 2 22 A150610 SCREW, SET (#18-5/16" X 1 1/2) 2 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 36