www.alphadynamic.eu Industrial pumps & Flowmeters Product Range Ruby Air Operated Diaphragm Pumps ADB Air Operated Diaphragm Pumps ADH Horizontal Centrifugal Pumps ADM Magnetic Centrifugal Pumps ADV Vertical Centrifugal Pumps ADF Oval Gear Flow Meters AD Flexible Impeller Pumps ADC Centrifugal Pumps ATLAS Progressive Cavity Pumps ZEUS Wobble Pumps 1
Ruby Air Operated diaphragm pumps STRONG QUALITY INDUSTRIAL PUMP New pump line with a brand new designing that offers reinforced pumping potentials. The updated designing provides the possibility to use also other materials at the hydraulic parts without decreasing the efficiency in pressure. Plus, it offers even bigger performance combined with economy. PLASTIC Ruby Air Operated Diaphragms Pumps The plastic Ruby range is designed for the chemical industry s most demanding applications including highly aggressive liquids and acids. Materials: PP - PVDF Self-priming capacity: max 7.5 m Max. head: 70m Flow rate: 50 650 l/min Viscosity: up to 50000 cps METAL Ruby Air Operated Diaphragms Pumps The metal Ruby range is designed for demanding applications throughout the paint sector and for solvent-based liquids. Materials: AISI 316 - ALUMINIUM Self-priming capacity: max 7.5 m Max. head: 70m Flow rate: 50 650 l/min Viscosity: up to 50000 cps Benefits: Use in potentially explosive atmospheres (ATEX zone 1-2 certification) High efficciency degree Economical air consumption, ecological designing High efficciency for pressure/capacity Oil free operation Very low level of icebarriers, up to zero in high wear outs New air valve designing, fully controled air passing, with the potential to use additional icebarrier protectives. Easy disassembling and re-assembling Easy item trasportation New generation diaphragms with embodied inner outer piston New generation PTFE diaphragms of embodied type for long-life operation (compound) Potential to be submersible Possibility to be used in dirty environments due to their closed designing Easy entrance orientation changing (manifold reverse) Automatic suction Advance unified diaphragm: Easy installation and maintenance Excellent service life Inventory cost reduction Improved performance Greater displacement per cycle No center hole, elimination of potential leak paths. There is no need for the main axis to be insured They can be screwed and unscrewed without the use of tools Advance Unified Diaphragm offers: The prominences decrease the stretching of the PTFE during the regression and prevent it from cracking. Exclusive conical shape provides excellent service life, suction lift and lower start-up pressure Backing ribs sustain and guide the diaphragm s flex for extended life and reduced cavitation on suction stroke Oversized integrated plate supports nearly 50% of the diaphragm through the entire dynamic motion. 2
ADB Air Operated Diaphrgam Pumps Materials: PP - PVDF AISI316 - ALUMINIUM Self-priming capacity: max 6m Max. head: 70m Flow rate: 5 900 l/min Viscosity: up to 50000 cps Benefits: Benefits at a glance: Available in PP, PVDF/ECTFE, ALUMINIUM, AISI316 STAINLESS STEEL Use in potentially explosive atmospheres (ATEX zone 1-2 certification) Gentle conveyance of liquid Ideal for abrasive, viscous, and shear sensitive media Can handle media with entrained solids Tolerant of dry running No dynamic or pressure loaded seals Mobile, easy to transport units Infinite regulation of pumping capacity and of pressure Dry self-priming Can run against closed valves Modern compressed air control, low main maintenance Submersible designs Actuated using non-lubricated air High tolerance to air with intense presence of humidity Coaxial shaft motor in tolerant synthetic material Pumping capability for both low viscous and high viscous up to 50.000 cps Twin manifold option ( two suction and two delivery) Bench or ceiling installation Three suction and delivery positions User-friendly maintenance and parts replacement Excellent performance and value for money 3
ADH Horizontal Centrifugal Pumps Centrifugal pumps series ADH with mechanical seal are made of plastic materials (Polypropylene and PVDF) and are suitable for high corrosive liquids containing solids in suspension. There are two versions available with different internal mechanical seal depending on use, A (lip seal) and B (bellows seal). Main features: Flow up to 75 m3/h, Temperature: PP: max 60 C; PVDF: max 95 C Max viscosity: 200 cst Pressure rating: NP 6 at 20 C Open impeller Typical applications: High corrosive liquids Liquids with solids Available materials of construction: PP PVDF Chemical, petrochemical, pharmaceutical, paper mills, textile industry, food processing, sugar plants, dairies, electronics, water treatment plants, any hazardous chemical applications. ADM Magnetic Centrifugal Pumps Mag drive centrifugal pumps series ADM PP/PVDF are made of thermoplastic materials (PP and PVDF) and are suitable for high corrosive liquids Thanks to the innovative mag drive system, pump models ADM PP/PVDF reduce the risks of losses and the maintenance costs. The transmission of the motion occurs through magnetic joints without using mechanical seals. This guarantees the maximum safety and efficiency. Main features: Materials in contact with the liquid: casing and impeller PP/PVDF High torque magnetic coupling NeFeBo standard Flow up to 50 m3/h; pressure up to 32 mwc Max temperature: PP 60 C PVDF 90 C Max viscosity: 200 cst Pressure rating NP 5 at 20 C. Typical applications: High corrosive liquids Toxic, noxious and carcinogenic liquids Available materials of construction: PP PVDF Chemical, petrochemical, pharmaceutical, paper mills, textile industry, food processing, sugar plants, dairies, electronics, water treatment plants, any hazardous chemical application. 4
ADV Vertical Centrifugal pumps Vertical centrifugal pumps with bracket series ADV are made of thermoplastic materials (PP and PVDF) and are suitable to pump high corrosive liquids with solids. Main features: Vertical centrifugal pump with bracket Materials availbale: PP, PVDF Max flow: 95 m3/h; max head: 36 mwc Max temperature: PP: 70 C; PVDF: 90 C Length of the column: from 500 mm to 3000 mm Typical applications: High corrosive liquids with solids Available materials of construction: PP PVDF Chemical, petrochemical, pharmaceutical, paper mills, textile industry, food processing, sugar plants, dairies, electronics, water treatment plants, any hazardous chemical applications. ADF Oval Gear Flow Meters ADF series is a comprehensive range of fully positive displacement flow meters which utilises the proven oval gear principle. This type of flow meter offers extremely high accuracy (better than +/-0.5% of reading), and is un-affected by viscosity (<1 to >1,000,000) with low pressure loss. With flow rates as low as 2 litres per hour up to 1,500 litres per minute, ADF series flow meters are available in a variety of construction materials and accessories, as either pulser or with various electronic display versions. Backed up by an unprecedented one year warranty, each ADF series flow meter is supplied with a test report to show accuracy. In addition, ADF series flow meters are very low maintenance and suitable for on site servicing when required. Features and advantages Flowrate of 0,01-1500 l/min Temperature up to 120o C Operating pressure up to 55 bar Oval rotors in Stainless steel and PPS Low pressure drop Modular design, measuring unit and digital display separate Ease of operation via multi-functional keys Easy to read 13mm 7-digit liquid crystal unit Display of quantity per operation, totalizer or instantaneous flowrate per minute Control of magnetic valves or a pump by using an interface amplifier Pre-settable batch controller up to 9999 litres per operation Direct or remote control service Display in litres, imperial gallons or US gallons Protection to IP 54 Portable use with pumps or fixed installation into pipework systems Explosions proof to EEXx ia IIC T6 Chemical, petrochemical, pharmaceutical, paper mills, textile industry, food processing, sugar plants, dairies, electronics, water treatment plants, any hazardous chemical application. 5
AD Flexible impeller Pumps Volumetric Stainless Flexible Impeller Pumps, are mostly suitable for the transfer of delicate, fragile and viscous medium, also with solid parts in suspension. Features and advantages All pump parts are made of stainless steel mirror polished material Easy cleaning Compact design, low weight Gentle, almost pulsation free transport Self-priming up to 5m wc Quick removal Fluids with seeds, residues stems are transported without problems Drive with Frequency converter or variable speed possible Supplied Dry-Running Protection Supplied bare shaft Supplied with trolley Capacities from 1 to 56 m3/h Viscosites up tp 75.000 cps Pressures up to 3 bar Food industry, beverage industry, chemical industry, sewage, electroplating, Cosmetics industry. ADC Centrifugal Stainless steel Pumps ADC pumps are manufactured in a strong, tolerant 316L stainless steel material.they are with Half-open impellers of open type, allowing solid passing and are in connection through an independent shaft with the motor. The sealing is made with a mechanical self-lubricating seal. ADC pumps have an intermediate space with drainage for protecting the electrical part from a possible leakage, through the seal. ADC pumps are designed in a way that allows prompt and safe opening of the pumping space a fast intervention and immediate cleaning. Features Flow : Up to 55 m3/h Viscosity: Up to 1000 cps Temperature: Up to 130 C Max Pressure: 47 mcw Motors 2800 / 1400 rpm ATEX motors Sealing in cer/graf, sic/sic, tg/ tg Ports din 11851 ( for food ) or BSP Supplied with stainless steel cover and feet Food industry, beverage industry, chemical industry 6
ATLAS Progressive Cavity Pumps The progressive cavity pumps are the most reliable positive displacement pumps with the wider use in the industry. The plain use, the almost free of pulses controlled flow, the possibility for automatic suction as well as the applying in promoting non homogenous liquids of high viscosity, justify the course of these pumps so far. Available in AISI304L / Cast iron Self-priming Robust and long-lasting Gentle conveyance Low running speeds - ideal for abrasive applications Can be installed vertically or horizontally Supplied with: By Pass dual speed Frequency converter Dry Running protection Hopper Trolley Gear motor Features: Flow: Up to 70 m3/h Viscosity: Up to 500.000 cps Temperature: Up to 110 C Max Pressure: 6 Bar Food industry, beverage industry, chemical industry, sewage, electroplating, Cosmetics industry ZEUS Series wobble pumps The simple design of the wobble stator and just one universal joint give you the inherent advantages of a progressive cavity pump of low pulsation and shear, solids handling and viscous liquids at an affordable price. The Close-Coupled Version is available in 304L Stainless Steel with standard Buna Nitrile Stator. In addition, the pump is available with a standard mechanical seal or can be upgraded to a hard face mechanical seal for abrasion resistance. Features: Low cost High tolerance Μοnoblock designing Automatic suction Supplied with: Frequency converter By Pass Dry-Running protection Stainless Steel Trolley Stainless base Performance: Up to 10 m3 Pressure: Up to 3 Bar Temperature: Up to 90 C 7
ALPHADYNAMIC PUMPS Co 3 Eleftherias Str. - 145 64 Industrial park of Kifisia - HELLAS T: +30 210 4200 338, +30 210 4200 422 www.alphadynamic.eu E-mail: info@alphadynamic.eu