CIRCULATOR Owner s Manual
TABLE OF CONTENTS About pureflow CIRCULATOR....3 Features....3 Specifications...3 Product Contents....4 Warnings...4 Unit Diagram....5 LCD Control Panel/Remote Control Diagrams....6 Unit Setup...7 Using pureflow CIRCULATOR... 8-9 Maintenance....10 Cleaning................................................... 10 Warranty....11 RECORDS Please record the information of the location of your purchase. Name: Phone #: Please record the serial number of your pureflow CIRCULATOR. Serial #: 2
ABOUT pureflow CIRCULATOR Thank you for purchasing pureflow CIRCULATOR by GreenTech Environmental. This fan has been designed to create a more comfortable living space with years of low maintenance operation. Please read through the usage and service instructions outlined in this owner s manual. GreenTech Environmental wants you to have the best experience with our product. Contact us anytime by visiting www.greentechenv.com/support. Don t forget to register your warranty, while you re thinking about it, at www.greentechenv.com/warranty. We re here for you. FEATURES Simultaneous/Independent Horizontal and Vertical Oscillation LCD Control Panel Simple Remote Control/Holder 12 Fan Speeds 3 Modes (Normal, Night, Nature) 12 Hour Timer Functions SPECIFICATIONS Model Number:... PUREFLOW CIRCULATOR Power Input:.... 12 VDC 2.2A MAX Power Usage:... 2.2W to 26W Unit Dimensions:. 29.5-37.4 H (750-950 mm) x 13.4 W (340 mm) x 13 D (330 mm) Unit Weight:....8 lbs (3.63kg) Warranty:... 2 Years 3
PRODUCT CONTENTS 1 - Owner s Manual 1 - Fan Base 1 - Base Nut 1 - Fan Pole 1 - Grille 1 - Fan Housing 1 - Fan Housing Nut 1 - Blade 1 - Blade Cap 1 - Fan Grille 1 - Fan Grille Screw 1 - Remote Control Holder 1 - Remote Control WARNINGS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: DO NOT use this fan to ventilate areas where flammable liquids or vapors are used, stored, or are present. DO NOT route the power cord under rugs, carpets, runners, or furniture. This may damage the Cord/Adapter and cause it to overheat, creating a fire hazard. DO NOT block, cover, or obstruct air flow to or from the Fan while in operation. NEVER insert or allow fingers or objects to enter grill openings while Fan is in operation. Injury and/or damage to the Fan may occur. NEVER use a single extension cord to operate more than the Fan or other electrical devices. ENSURE the plug fits tightly into the outlet. A loose outlet is a potential fire hazard and should be replaced. ALWAYS turn off and unplug the power cord when not in use, when servicing, cleaning, or moving the fan. This product is intended for household use and should not be used in a commercial or industrial setting. ALWAYS place the Fan on a stable, level surface while in operation to prevent the Fan from overturning. DO NOT use this Fan in an open window. Rain or moisture may create an electrical hazard. DO NOT use this Fan if the housing has been removed or any part of the Fan/Cord/Plug has been damaged or is not functioning correctly. DO NOT hang or mount the Fan on the Wall or Ceiling. 4
UNIT DIAGRAM Grille Alignment/Lock Location Grille/Fan Housing Carrying Handle Motor Grille Screw Location Telescoping Pole Remote Control Holder Control Panel Base IR Remote Receiver FOR YOUR SAFETY, READ ALL WARNINGS & CAUTIONS (PAGE 4) AND UNIT USE (PAGE 7-8) BEFORE USING YOUR pureflow CIRCULATOR. 5
CONTROL/REMOTE DIAGRAMS LCD Control Panel Mode Button Timer Button Horizontal Oscillation Button LCD NOTE: When a function is active, a duplicate icon will appear within the LCD area. Fan Speed Button Vertical Oscillation Button Power Button Remote Control Power Button Fan Speed Button Timer Button Horizontal Oscillation Button Vertical Oscillation Button Nature Mode Button Night Mode Button NOTE: To return to Normal Mode, press the current mode s button. 6
UNIT SETUP INSPECT pureflow CIRCULATOR FOR DAMAGE BEFORE SETUP OR USE. 1. Insert the Fan Pole into the Fan Base and lock it using the Base Nut. 2. Place the Fan Housing onto the motor by aligning the 3 holes and pegs. Fasten it into place with the Fan Housing Nut. 3. Place the Blade onto the motor, with the internal cross structure seated over the 2 metal prongs of the motor. 4. Screw the Blade Cap counter-clockwise to lock the Blade into place. 5. Align the text on top of the Grille and lock it in place, then fasten the Grille Screw on the front/bottom edge. 6. Attach the Remote Control Holder by placing it into the hook on the back of the unit. 7
USING pureflow CIRCULATOR READ ALL WARNINGS & CAUTIONS (PAGE 4) BEFORE USING YOUR pureflow CIRCULATOR. Height Adjustment To adjust the height of pureflow CIRCULATOR, press and hold the button on the back of the pole (above the Remote Control Holder) and move the head to your desired height. Power Press the Power Button to turn your unit ON/OFF. Your unit will remember any previous mode and speed settings when it is turned back ON, until it is unplugged. Modes Press the Mode Button on the Control Panel or the Separate Mode Buttons on the Remote Control to choose your desired mode. Normal Mode pureflow CIRCULATOR s starting mode provides a consistent airflow. Night Mode Quieter airflow for a better night s rest. Nature Mode Adjusts the airflow freely to mimic the natural outdoor environment. 8
USING pureflow CIRCULATOR (continued) Fan Speed Press/Hold the Fan Speed Button on the Control Panel to cycle through the 12 levels, or use the Up and Down arrows on the Remote Control to find your ideal level. Oscillation Vertical Oscillation Press the Vertical Oscillation Button to turn the 105 Vertical Oscillation ON/OFF. Horizontal Oscillation Press the Horizontal Oscillation Button to turn the 90 Horizontal Oscillation ON/OFF. 12 Hour Timer Press the Timer Button to cycle through the (12) 1-hour shut-off time settings. 9
MAINTENANCE DISCONNECT pureflow CIRCULATOR FROM THE OUTLET BEFORE ANY MAINTENANCE OR CLEANING Your pureflow CIRCULATOR should be maintenance free but sometimes things can happen. If you are having problems with your fan, contact GreenTech Environmental Support. Email us at Support@GreenTechEnv.com Call us Monday - Friday 8:30-5:30 EST at 800-621-7201 CLEANING DO NOT USE ANY HARSH CHEMICALS OR CLEANERS ON THE UNIT. 1. Remove the Grille Screw on the bottom of the Fan Housing. 2. Remove the Blade Cap and the Blade from the Fan Housing. 3. Wipe the entire unit, including the Blade, Grille, and Fan Housing, down with a damp cloth. Use only water or a water/vinegar mixture. 4. Replace the Blade, Blade Cap, and Grille/Screw. 10
LIMITED WARRANTY INFORMATION Your pureflow CIRCULATOR(Product) is warranted to be free from all defects in material and workmanship in normal household use for a period of 2 Years from date of purchase. The warranty is granted only to the original purchaser. The warranty is subject to the following provisions: Any damages or malfunctions caused by negligence, abuse, or use not in accordance with the Product Owner s Manual are not covered by this warranty. Likewise, any defects or damages caused by unauthorized service or the use of other than Genuine pureflow Parts are not covered. All shipping charges are the responsibility of the purchaser. GreenTech Environmental will, at its option, repair or replace a defective Product or part(s) for the Product that is/are covered by this warranty. As a matter of warranty policy, GreenTech Environmental will not refund the customer s purchase price. OBTAINING WARRANTY SERVICE To obtain warranty service you must return the defective product along with proof of purchase to the pureflow Authorized Service Center. All shipping costs submitted under this Warranty shall be borne by purchaser. Unless this Warranty is expressly renewed or extended by pureflow, any repaired or replaced part of unit shall be warranted to the original purchaser only for the length of the unexpired portion of the original warranty. For the location of the nearest pureflow Authorized Service Center or for other service information, please visit us online or contact Customer Service at: www.greentechenv.com/support Before any product is sent for service, the customer should contact the pureflow Service Center to obtain a Return Merchandise Authorization (RMA) Number. This RMA Number should be clearly written on the box before shipping. All components/parts including the remote (if applicable), manuals, and original packaging should be included in the return if available. FURTHER LIMITATIONS AND EXCLUSIONS ARE AS FOLLOWS Any warranty that may be implied in connection with your purchase or use of the Product, including any warranty of merchantability or any warranty for Fitness For A Particular Purpose is limited to the duration of this warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Your relief for the breach of this warranty is limited to the relief expressly provided above. In no event shall GreenTech Environmental be liable for any consequential or incidental damages you may incur in connection with your purchase or use of the Product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. REGISTRATION Please register your Product within 10 days of purchase by visiting: www.greentechenv.com/warranty Registering your new pureflow product entitles you to the most up-to-date pureflow warranty and promotion information. 11
OM Revision: GTE-pureFlow_CIRCULATOR-OwnersManual-171128 www.greentechenv.com 12