STORAGE UNITS STORAGE UNITS M Index Divider Page 1
M-STORAGE UNITS -STORAGE UNITS Base Stand for,................-2 Storage Bins, Drawer Cabinets Cabinet Doors, 40 Bin...........-2 Drawer Cabinets...............-2 Drawer Cabinet Dividers.........-2 Drill Cases...................-11 Drill and Tap Dispensers........-12 Hand Cleaner Dispensers.......-16 Hand Clean Pump.............-16 Labels, Pressure Sensitive, Storage Bins & Drawer Cabinets.-8 MSDS Organizer Right to Know Compliance Center..-6 Rack and Binder..............-6 Racks 2-4 Rod Wire Spool...........-13 Aerosol Can................-13 Hose Clamp................-13 Threaded Rod...............-13 Keystock...................-13 Brake Line..................-14 Fuel Line...................-14 Cable Tie...................-14 Wheel Dispenser.............-14 Wiper Racks................-15 Key Rack...................-16 Literature Storage............-16 Shelving Literature Storage............-16 Storage Door Tray............-16 NOTES Storage Bins Bulb Organizer..............-15 Corrugated Bin Boxes..........-9 Stackable Plastic..............-9 Steel.......................-1 Storage Cabinets E-Z View....................-8 Hose/Cable..................-7 Truck & Van Cabinets & Accessories.................-17 Utility.......................-8 Welding....................-13 Steel Storage Tray Accessories 4 Drawer Slide Rack...........-5 6 Drawer Security Slide Rack....-5 Slide Rack Stands.............-5 Storage Service Trays.........-3-4 Adjustable, Steel..............-3 Portable, Copolymer Resin......-3 Plastic Utility Boxes............-9 Steel.......................-4 Stowaway Orrganizer...........-10 A10-ii REVISED OCTOBER, 2009 Copyright 2011 Sosmetal Products Inc. All rights reserved.
STORAGE BINS STORAGE BINS Heavy duty units designed for storing a wide variety of small parts. Storage bins are made from prime, cold rolled steel Interlock and welded construction. Rust and acid resistant baked enamel finishes. One inch lip provides a convenient location for labels and keeps parts securely in place. Part No. 12004 PART NUMBER BIN BIN BIN NUMBER WIDTH HEIGHT DEPTH of BINS DEPTH HEIGHT WIDTH 12004* 23-5/8 23-5/8 4-3/4 36 3-3/4 3-3/4 3-7/8 12021 35 21 12 40 12 4 4 12058 35 9-1/2 12 16 12 4-1/2 4 12068 35 17-1/2 12 32 12 4 4 12154 34 24 12 12 12 6-5/8 8 12155 34 20 12 18 12 6-3/8 5-3/8 12156 34 24 12 24 12 5-1/2 5-3/8 12157 35 21 12 8 12 8 8 * Vertical dividers are removable, allowing creation of double width bins. Doors available below. 72 BIN CABINET ORDER 12021 and 12068 80 BIN CABINET ORDER TWO 12021 STORAGE BINS. Part No. 12021 Part No. 12058 Part No. 12154 Part No. 12068 Part No. 12157 Part No. 12155 Part No. 12156-1
DRAWER CABINETS and ACCESSORIES DRAWER CABINETS Designed as heavy duty units for storing a wide variety of small parts. Drawer cabinets are made from prime, cold rolled steel Interlock and welded construction. Rust and acid resistant baked enamel finishes. Exclusive No Drag drawers for smooth, easy travel. All drawers have Positive Stop mechanism which prevents drawers from being accidentally pulled out of the cabinet. All storage cabinets include drawer dividers (Part No. 12053.) All Drawer handles are molded as part of the drawer. PART NUMBER DRAWER DRAWER DRAWER NUMBER WIDTH HEIGHT DEPTH of DRAWERS DEPTH HEIGHT WIDTH 12020 33-3/4 11 11-5/8 18 11-3/16 2-3/4 5-5/16 12064 17-1/8 11 11-5/8 9 11-3/16 2-3/4 5-5/16 12065 33-3/4 3-15/16 11-5/8 6 11-3/16 2-3/4 5-5/16 12067 33-3/4 7-3/8 11-5/8 12 11-3/16 2-3/4 5-5/16 12070 17-1/8 11 11-5/8 6 11-3/16 2-3/4 5-5/16 12074* 33-3/4 12-13/16 11-11/16 18 11-3/16 3-1/2 5-5/16 * Drawers are 3/4 higher than cabinet 12020. Part No. 12020 36 dividers included Part No. 12064 18 dividers included Part No. 12065 12 dividers included DRAWER CABINET DIVIDERS To use when extra spaces are needed. Part No. 12067 24 dividers included Part No. 12053 10 Part No. 12070 12 dividers included Part No. 12074* 36 dividers included 40 BIN CABINET DOORS Hinged door set with padlock attachment. Attach with sheet metal screws or rivets. Use with 40 bin cabinet #12021. Padlock, screws and rivets not included. BASE STAND Special multi-purpose base stand can be used with or without legs. 3 raise without legs, 5-3/4 raise with short legs or 15 high with long legs. Part No. 12059 (short legs 5-3/4 high) Part No. 12164 (long legs 15 high) Part No. 12132 35 wide x 12 deep. Acid and rust resistant baked enamel finish. Solid top with raised lip corners so cabinet cannot slide off. Can be used with all storage bins and drawer cabinets. -2
STORAGE TRAYS SERVICE TRAYS ADJUSTABLE Movable dividers for convenient creation of any size compartment needed. Part No. 12090 PART INCHES PART NO. NUMBER WIDTH HEIGHT DEPTH DIVIDERS 12051 18 3 12 12052 12090* 18 3 12 12091 12092 * Completely adjustable, vertically and horizontally. ADDITIONAL DIVIDERS PART TYPE OF TYPE OF FITS NUMBER DIVIDER MATERIAL TRAY NO. QTY 12052 Horizontal Plastic 12051 10 12091 Horizontal Plastic 12090 3 12092 Vertical Plastic 12090 3 Part No. 12051 PORTABLE SERVICE TRAYS These trays are made to be carried right to the job. You don t have to guess what you need or stuff your pockets with what you might use. Luggage style handle for comfort. Fits all slide racks on page 14. Made from lightweight, tough copolymer resins that won t dent, rust, warp or break. Part No. 12109 Part No. 12111 Part No. 12151 PART NUMBER of NUMBER WIDTH HEIGHT DEPTH COMPARTMENTS 12151 18 3 12 21 12109 18 3 12 24 12111* 18 3 12 4 to 16 12110* 18 3 12 8 to 32 * Includes removable partitions to create compartments from 4 to 16 and 8 to 32. Part No. 12110-3
STORAGE TRAYS SOSMETAL PRODUCTS INC. Service trays are made from prime, cold rolled steel. Rust and acid resistant baked enamel finishes. Service trays have scoop bottom compartments for easy removal of small parts. Metal clasp holds lid down to provide transportability. SERVICE TRAYS Designed for storing and transporting a wide variety of small parts. PART INCHES NUMBER of NUMBER WIDTH HEIGHT DEPTH COMPARTMENTS 12116 18 3 12 6 12061 18 3 12 12 12050 18 3 12 16 12071 18 3 12 20 12056* 18 3 12 21 12017 18 3 12 24 12062 18 3 12 32 12166 18 3 12 6 * 20 equal size compartments, with one large compartment for tools. Part No. 12071 Part No. 12017 Part No. 12166 Part No. 12116 Part No. 12056 Part No. 12050 Part No. 12061 Part No. 12062-4
STORAGE TRAY ACCESSORIES 4 DRAWER SLIDE RACKS Slide racks are made from prime, cold rolled steel. Rust and acid resistant baked enamel finishes. Each tray can hold 100lbs. in the open position without tilting. Fits all service trays on the facing page. Part No. 12007 features Triple Track telescoping tracks for extra extension. Takes up less room but provides full opening. (Spacer saver) Part No. 12112 features heavy duty construction with metal riveted roller wheels built to handle the heaviest loads. Part No. 12131 to be used with 4 drawer racks listed below. Keeps drawers secure in service trucks. LOCKING HINGES For 4 drawer racks. Locks drawers in place. PART NUMBER of NUMBER WIDTH HEIGHT DEPTH DRAWERS 12134 20-1/4 8-1/8 15-3/4 2 12007 20-5/16 15 12-1/2 4 12019 20-1/4 14-3/4 15-3/4 4 12112 20-7/16 14-3/4 16-3/4 4 Part No. 12131 6 DRAWER SECURITY SLIDE RACK Slide racks are made from prime, cold rolled steel. Rust and acid resistant baked enamel finishes. Each tray can hold 100lbs. in the open position without tilting. Fits all service trays on the facing page. Not recommended for wall mounting. Door includes an exclusive keyed sliding lock system. Telescoping tracks. 24 H x 20-3/4 W x 14 D. Drawers not included. Part No. 12135 SLIDE RACK STANDS Acid and rust resistant baked enamel finish. For convenient use of lower drawers. 1/2 lip at corners so cabinet will not slide off. Extra strong allows cabinet stacking. PART USE with NUMBER WIDTH HEIGHT DEPTH SLIDE RACK NO. 12152 20-5/16 5-3/4 12-1/2 12007 12115 20-5/16 15 12-1/2 12007 12153 20-1/4 5-3/4 15-3/4 12019 12060 20-1/4 15 15-3/4 12019 12113 20-7/16 15 16-3/4 12112-5
RIGHT TO KNOW COMPLIANCE CENTER and ACCESSORIES For Compliance with OSHA s Hazard Communication Standard Organize MSDS Sheets in One Place RIGHT TO KNOW COMPLIANCE CENTER Economical and popular. This compliance center contains Red polystyrene board: - Holes for wall mounting - Bright safety colors - Storage rack for binder Yellow MSDS binder: - 2 wide with 1-1/2 rings - Cover and spline marked MSDS Chain - 3 feet long Part No. RTK200 20 high x 14 wide x 4-1/2 deep RIGHT TO KNOW RACK and BINDER This compliance center contains Same rack, binder and chain as RTK200 - without the red backboard: - Holes in rack for wall mounting - Rack holds binders up to 3-1/2 wide Part No. RTK600 12 high x 14 wide x 4-1/2 deep -6
STORAGE CABINETS and ACCESSORIES HOSE / CABLE CABINET Used to store hose, cable, tubing, wire, etc. Welded construction. Made from prime cold rolled steel. Rust resistant baked enamel finish. Ideal for storing hydraulic hose. Sections are adjustable. Includes 5 dividers. Shipped motor freight. Part No. 12150 Cabinet size 27-3/4 H x 36 W x 20 D Weights 70 lbs. PRESSURE SENSITIVE, EASY PEEL LABELS Used on storage bins & drawer cabinets Coated paper resists dirt and oil. All labels are printed on coated stock. PART TYPE OF PAPER NUMBER LABEL COLOR TYG13 Metric 8.8 Hardware Set White (TYG55 Coarse & TYG56 Fine) TYG14 Grade 5 Hardware Set White (TYG51 USS & TYG52 SAE) TYG15 Blank Yellow TYG35 PCV Valves White TYG39 Wheel Studs & Nuts White TYG51 Grade 5 USS Hardware White TYG52 Grade 5 SAE Hardware White TYG53 Grade 8 USS Hardware Yellow TYG54 Grade 8 SAE Hardware Yellow TYG55 Metric 8.8 Coarse White TYG56 Metric 8.8 Fine White TYG57 Metric 10.9 Coarse Yellow TYG59 Breather Filters White TYG63 Brass Fittings Yellow TYG67 Mini Bulbs White TYG69 Grade 5 USS Lg. Sizes White TYG70 Grade 8 USS Lg. Sizes Yellow TYG77 Drain Plugs White TYG78 Drain Plug Gaskets White TYG80 Grade 8 Hardware Set Yellow (TYG53 USS & TYG54 SAE) Label Sets are available for all assortments in Bins. To order use stock number with BL suffix (exp. BL501054). -7
STORAGE CABINETS SOSMETAL PRODUCTS INC. For storing a wide variety of small parts. Welded construction. Drawers are made of clear, break resistant high impact styrene. Exclusive Non-Slip feature. Wall mounting if desired. E-Z VIEW STORAGE CABINETS Part No. 12055 PART NUMBER DRAWER DRAWER DRAWER NUMBER WIDTH HEIGHT DEPTH of DRAWERS DEPTH HEIGHT WIDTH 12054 21 25-3/8 6-3/8 64 5-1/2 1-7/8 2-7/8 12055 16-3/8 11 6-3/8 20 5-1/2 1-7/8 2-7/8 Part No. 12054 UTILITY CABINETS Store and organize a variety of miscellaneous items. Cabinets are made from prime, cold rolled steel. Acid and rust resistant baked enamel finish. 12105 and 12106 cabinets feature two adjustable shelves and a locking hinged door. 12014 cabinet features double doors with lock and two keys (ignition cabinet.) Part No. 12105 Part No. 12014 PART NUMBER of NUMBER WIDTH HEIGHT DEPTH SHELVES 12105 14 30 13 2 12106 20 33 14 2 12014 26-1/2 30 9 5 Part No. 12106-8
STORAGE BINS and CONTAINERS STACKABLE PLASTIC BINS Heavy duty units designed for storing a wide variety of small parts. IDEAL for BREATHER FILTERS and PCV VALVES! Extra-wide stacking ledge assures stability and allows higher stacking. Anti-slide stop prevents stacked bins from shifting forward. Large label slot for easy labeling and relabeling. Curved bottom at front of each bin allows easy retrieval of small parts. PART NUMBER WIDTH HEIGHT LENGTH COLOR 12073 8 7 11 Yellow CORRUGATED BIN BOXES 200 lb. test corrugated cardboard construction. Designed to stretch your shelving space. White exterior. Easily labeled or marked. Assembly required. H L W PART INCHES NUMBER WIDTH HEIGHT LENGTH QTY 12136 2 4 12 25 12137 4 4 12 25 12138 8 4 12 25 PART INCHES NUMBER WIDTH HEIGHT LENGTH QTY 12139 4 4 18 25 12140 8 4 18 25 STORAGE CONTAINER Excellent solution for stocking transmission filter kits and other bulky items. Straight walls allow for efficient use of space. Hand holes on all four sides. High density polyethylene for rigidity, strength, durability. Mesh side and base allow high visibility and won t trap dirt. Only available in grey. IDEAL for TRANSMISSION FILTER KITS PART INCHES NUMBER WIDTH LENGTH HEIGHT 12127 24 16 12-9
PLASTIC STORAGE TRAYS and ORGANIZER THE STOWAWAY ORGANIZER Made from prime cold rolled steel. Durable gray baked enamel finish. Versatile 3 way use - key hole slots for wall mounting, bolt holes for stacking and handle for carrying. Holds 5 plastic trays (as noted below). 2 sizes available. Part No. 12141 13-1/2 W x 9-1/8 D x 13-1/4 H Part No. 12142 11-1/4 W x 6-3/4 D x 10-3/4 H PLASTIC UTILITY BOXES Handy, inexpensive and durable. Transparent or translucent plastic with hinged lid and snap-closure. Sizes and compartments for any use: storing hardware, office and hobby supplies, electronic and precision parts and much more. *Polypropylene - Heavy Duty -10
DRILL CASES The best protection for your valuable drills. High impact steel. Space for 11 metric drills. 1mm to 6mm by.50mm increments. Drill sizes imprinted for easy identification. METRIC DRILL CASE FRACTIONAL DRILL CASE Space for 13 fractional drills - 1/16 to 1/2 by 64ths. Sizes imprinted on case for easy identification. Part No. 12093 Ideal for keeping your drills safe and handy. High impact steel. Space for 19 metric drills. 1mm to 10mm by.50mm increments. Drill sizes imprinted for easy identification. METRIC DRILL CASE Part No. 12095 FRACTIONAL DRILL CASE Space for 15 fractional drills - 1/16 to 1/2 by 32nds. Sizes imprinted on case for easy identification. Part No. 12094 TAP AND DRILL CASE The best drill and tap case for protecting your valuable tools. High impact steel. Space for 9 drills and 9 taps. Sizes 6-32 to 1/2-13 coarse thread. Drill and tap sizes imprinted for easy identification. Part No. 12096 FRACTIONAL DRILL CASE Space for 29 fractional drills - 1/16 to 1/2 by 64ths. Sizes imprinted on case for easy identification. Part No. 12107 TAP AND DRILL CASE You ll save time when your drills are organized in this handy steel case. High impact steel. Space for 9 drills and 9 taps. Sizes 6-40 to 1/2-20 fine thread. Drill and tap sizes imprinted for easy identification. Part No. 12097 Space for 26 letter drills - from A to Z. Sizes imprinted on case for easy identification. LETTER DRILL CASE Part No. 12108 INDUSTRIAL DRILL CABINET Space for 29 drills, 12 of each - 1/16 to 1/2 by 64ths. Heavy duty construction allows cabinets to be stacked on each other. Part No. 12098 Space for 60 number drills - from 1 to 60. Sizes imprinted on case for easy identification. NUMBER DRILL CASE Part No. 12072 Cabinet Size: 14-1/2 long x 7-1/4 high x 7-1/4 deep. Part No. 12099-11
DRILL and TAP DISPENSERS SOSMETAL PRODUCTS INC. 1/2 REDUCED SHANK DRILL INDEX Space for 8 drills, sizes 9/16-1 by 16ths. Sizes imprinted on case for easy identification. LETTER DRILL DISPENSER For letter drills A to Z. Has 3 drawers. Part No. 12148 Part No. 12085 MASTER COMBINATION DRILL INDEX Holds fractional drills 1/16 to 1/2 by 64ths. Wire gauge No. 1 to No. 60. Letter sizes A to Z. NUMBER DRILL DISPENSER For number drills 1 to 60. Has 5 drawers. MASTER TAP DISPENSER For 1/4 to 1 Tap Sizes. Plastic dividers protect tap edges. Extra storage for drills, dies, etc. 14-1/2 x 7-1/4 x 7-1/4 Part No. 12082 MASTER TAP DISPENSER For 2-56 to 12-24 Tap Sizes. Plastic dividers protect tap edges. Extra storage for drills, dies, etc. 14-1/2 x 7-1/4 x 7-1/4 Part No. 12084 Part No. 12086 Part No. 12087-12
RACKS 2 ROD WIRE SPOOL RACK Ideal for counter top use. Heavy duty metal construction. Will hold up to eight 100 spools. 4 ROD WIRE SPOOL RACK Heavy duty metal construction. Stores spools up to 10 diameter. Spools load and unload easily. Part No. 12002 Part No. 12057 Cabinet size: 26-1/8 wide x 17-7/8 high x 6 deep. AEROSOL CAN RACK Heavy duty metal construction. Hang on wall or use on counter. 21-1/2 wide, 5-1/4 high, 3-1/8 deep. 6 compartments. Cabinet size: 26-1/8 wide x 37-1/8 high x 6 deep. WELDING ROD CABINET Welded construction. Baked grey hammerstone enamel finish. Cabinet Size: 16-1/8 wide x 18-1/2 deep x 8-1/8 high. Part No. 12013 Part No. 12078 MASTER HOSE CLAMP RACKS Durable heavy duty steel construction. Bench or wall mountable. Sign panel lists clamp diameters. Rack size: 23-1/4 wide x 16-1/8 high x 5-1/4 deep. Contents not included with racks PART HOSE CLAMP NUMBER NUMBER SIZES OF LOOPS 12124 #4 mini thru #36 10 12125 #40 thru #72 5 THREADED ROD RACK Heavy duty metal construction. Separates and protects threaded and unthreaded rod, key stock. 18 separate compartments. Compartment size: 2-1/16 square. 10 compartments, holds keystock up to 3/4 x 12. Bench or wall mount. Rack size: 12-1/4 wide x 12 high x 6-1/4 deep. KEYSTOCK RACK Contents not included with rack Part No. 12006 Part No. 812123 Cabinet size: 24-1/8 wide x 24 high x 6-7/8 deep. -13
RACKS SOSMETAL PRODUCTS INC. BRAKE LINE RACK FRACTIONAL DOMESTIC Sturdy metal construction Informative face plate tells about our Safety Certified hydraulic brake lines. 6 different lengths of 3 sizes 18 total printed on the face plate. FUEL LINE - VACUUM HOSE RACK Sturdy yet inexpensive. Durable, all metal, heavy duty construction. Hang on wall or place on counter or floor. Easy assembly - no tools needed. Part No. 12011 BRAKE LINE RACK METRIC IMPORT Part No. 12010 CABLE TIE RACK Sturdy metal construction. Holds 7 lengths 35 lines total. Inventory can be taken at a quick glance, with the 5 compartment rack. Rack may hold up to 1000 cable ties. Wall mountable pre-drilled holes on 3 sides for ease of hanging. 12-1/4 H 3-1/8 D 17-1/2 L Part No. 12015 BRAKE LINE RACK GM 6mm Sturdy metal construction. 14 slots, holds 7 lengths, total 112. 14-3/4 long x 5-1/4 deep x 6 high. Part No. 12180 WHEEL DISPENSER Holds 4-1/2 size cut-off wheels or grinding wheels. Take one out and the next one drops down. 16-1/8 H x 6-3/16 W x 5-3/16 D. Holds approx: 275 cut-off wheels or 60 grinding wheels Part No. 12165 Part No. 12178-14 REVISED JANUARY, 2013
RACKS and BULB STORAGE BIN EXACT FIT WIPER RACK 2 display (24 W x 11.5 H x 24 D). Easy to read application charts provide convenient access to important product information. 9 adjustable hooks. RAINY DAY WIPER RACK 2 display holds up to 150 blades. Durable, easy to clean and maintain. Easily mounts to most pegboard fixtures. Display shipped without products & application guide or header card. Application guide available separately (PB37). Header card 2 available separately (12143). Contents not included with rack Contents not included with rack Part No. 12145 Part No. 12147 BOSCH ROLLING DISPLAY WIPER RACK 2 rolling design. 3 bars with 10 hooks each will accommodate a total of 180 blades. Attractive molded styrene header. Sturdy base great for holding one gallon jugs of windshield washer solvent. Part No. 12146 New narrow profile design... less space with more inventory. Adjustable bin dividers... provide flexible storage capacity. Impact resistant... built tough for the most demanding environments. See through bins... easy product selection and inventory at-a-glance. All metal frame... adds strength and durability. Blue powder coating... for long-lasting good looks. Concealed storage area... offers extra space for additional inventory. Convenient installation... wall-mount or place on your workbench. WAGNER S BULB STORAGE BIN MERCHANDISER Order Part No. 615301 (19 wide x 26-3/4 high x 4 deep) *Added Bonus: This rack includes (6) #9004 Bulbs FREE to help offset the cost of the rack. -15 REVISED JANUARY, 2013
HAND CLEANER DISPENSERS, SHELVING / STORAGE TRAYS and RACKS CITRA-CLEAN PUMP All natural, organic hand cleaner, with Di-Limonene Fits Citra-Clean 1 gallon jugs. Stainless steel construction, withstands heavy industrial use jug after jug after jug. Will not fail like throw - away plastic pumps. Never buy another pump. Guaranteed for life when used with our brand Citra-Clean hand cleaner. Part No. 13188 Heavy duty pump assemblies can be used with Citra-Clean or E-Z clean hand cleaners. WALL MOUNT DISPENSERS Pumps both pumice and non-pumice products. Fully guaranteed for 5 years. Part No. 13187 Fits 7 lb. can Part No. 13186 Fits 4-1/2 lb. can STORAGE DOOR TRAY High quality, all steel storage door trays are designed specifically for use in outfitting trucks and vans. Storage door trays are perfect for plumbers, electricians, sign painters, service vehicles, anyone who works out of their truck or van. Ready to install. Trays come with lids. Part No. 12075 Tray Size: 21 wide x 21 high x 4-1/2 deep. 3 door trays with 12 tray dividers. LITERATURE STORAGE RACK Our racks provide a convenient and compact way to store literature and still keep it readily accessible and visible. Storage literature racks are perfect for waiting rooms, and it can be used for parts booklets, wall charts, shop catalogs, invoices, etc. Keyhole slots are provided for wall mounting. KEY RACK 28 hooks included. Free standing. Part No. 12076 Rack Size: 13-1/8 wide x 26-1/4 high x 2 deep. Opening: A = 12-1/8 wide, B = 5/16 deep, C = 5-5/8 high Number of pockets: 10 Part No. 915001-16
SPECIAL ORDER PRODUCTS TRUCK and VAN CABINETS and ACCESSORIES Part No. 12162 Part No. 12161 Made from prime cold rolled steel. Welded construction. Part No. 12160 are ideal for large tools and bulky items. Part No. 12160 and 12161 come with lockable hinges to hold drawers in place in moving vehicles. Part No. 12161 comes with 81 adjustable dividers. Gray baked enamel finish. ALLOW APPROXIMATELY 2 WEEKS FOR DELIVERY. PART NUMBER NUMBER OFWEIGHT NUMBER WIDTH HEIGHT DEPTH of DRAWERS DIVIDERS LBS. 12160* 12-5/8 24-1/2 12-1/8 4 0 32 12161* 12-5/8 24-1/2 12-1/8 9 81 46 12162 Dividers for No. 12161 1 * Padlock not included. Part No. 12160-17
SECTION STORAGE SOLUTIONS -17 PIX PICTURE ILLUSTRATIONS OF SOSMETAL PRODUCTS BEING USED. REVISED OCTOBER, 2009