HEAT RECOVERY UNITS TSEK Mech-Elec,, Hawthorn Road, Western Ind. Est., Dublin Tel: +-- 88 E-Mail: info@mech-elec.ie Mech-Elec UK, Unit, Bretts Farm, Romford Road, Aveley, Essex, RM XD. Tel: +--879 E-Mail: info@mech-elec.net
GENERAL INFORMATION Heat Recovery Ventilation Units () are designed for saving energy and also improving indoor air quality. units provide the facilities of air-conditioning applications (residential, commercial and industrial areas) by using plate type exchangers, recovering heat from air to air. The heat is effectively transferred from warm to cold air by the exchangers with high conductivity, efficiency and performance. 7 standard models, with TSEK certification, CE marked and GOST-R certification in compliance with applicable directives, High efficient, direct driven AC Fans with low noise level, Proper ventilation with speed fans controlled separately, The compact design provides easy installation and maintenance, Aluminum plate type heat exchangers with high conductivity and performance, Indoor air quality with G filters, Excellent sound and heat isolation due to fully insulated cabinet Electronic Controller "Standard with the unit"
WHY HEAT RECOVERY UNITS model No Season Description Dry-bulb Wet-bulb Relative Temperature Temperature humidity Enthalpy Humidity Ratio Spesific Volume (ºC) (ºC) (%) (kj/kg) (gr/kg) (m /kg) Summer Outside,8 7, 7,7,,888 Summer Inside 7,9,,6,,88 Summer Frehs Air 8,7,8 6, 67,,,878 Summer Exhaust 9, 9, 8,9,,,87 Winter Outside - -,9 8,,9,,768 6 Winter Inside,8, 8,78 7,,8 7 Winter Frehs Air,9, 8,9 6,9,,88 8 Winter Exhaust 8, 7,9 9,7,79 6,,88 Fresh Air Cooling Capacity q = m a [ ( h - h ) - ( w - w ) h w ] q,88 [ - = (7,7 -,6) - ( ),8 q = 6,67 kw Energy Saving for Summer ] Fresh Air Cooling Capacity with V q = m a [ ( h - h ) - ( w - w ) h w ] q,88 [ q =, kw - = (67, -,6) - ( ),8 Q = q - q = 6,67 -, Q =, kw ] Fresh Air Heating Capacity [ q 6' = m a h h 6' - [ ] q 6' = 6, -,9,8 q 6' = 7,6 kw ] Energy Saving for Winter Fresh Air Heating Capacity with V [ 7 q 6' = m a h h 6' - 7 [ ] 7 q 6' = 6, - 6,9,8 7 q 6' =,99 kw Q = q 6' - 7 q 6 = 7,6 -,99 Q =,6 kw ]
SPECIFICATIONS MODEL 9 9 6 Air Flow Pa* m /h 9 9 6 Heat Recovery Efficiency % Efficiency up to 7 %, depending on working conditions Volt / Hz / ~ Electrical Data W 6 9 76 76...7 A,68,6 7,8 7,8,,, Air Filter Synthetic Filters for Fresh and Exhaust Air Optional Heater Electrical or Hot Water with 9/7ºC kw V/~ V/~ V/~ V/~ * 7 V/~ V/~ V/~ W L H L W Fresh Air Exhaust W Outdoor ød W Indoor W W ød Fresh Air Exhaust H Ls (min.) Filtre / Filter Service Clearance L W MODEL 9 9 6 Lenght [mm] L 8 Width [mm] Height [mm] Duct Connection [mm] W H ød 7 8 8 98 6 6 69 Ø6 Ø Ø Ø Ø Ø 6 Ø Weight [kg] 8 8 8 W 8 8 7 W 96 [mm] W W 8 8 8 8 7 6 Service clearance [mm] Ls
AIR FLOW - EXTERNAL STATIC PRESSURE 8 6 Air Flow [m /h] 9 6 7 8 9 6 8 Air Flow [m /h] Air Flow [m /h] 9 7 9 7 9 Air Flow [m /h] 6 8 6 8 Air Flow [m /h] 6 6 9 8 6 9 8 7 Air Flow [m /h] Air Flow [m /h]
INSTALLATION DETAILS Fresh Air Indoor Duct Type Electric Heater (Optional) L = D (min.) Exhaust Heat Recovery Unit Exhaust Service Clearance Outdoor Fresh Air heat recovery units have circular duct inlets and outlets. If the duct system is rectangular, the adaptors from circular to rectangular ducts could be supplied optionally. W OUTDOOR CONNECTION KIT (OCK) H D Outdoor connection kit is used to have the fresh air from the outside and exhaust the return air at the same time by not causing the return air at the same time by not causing the short circuit. The connection dimensions are suitable with the heat recovery unit inlets and outlets. MODEL 9 9 6 Width W 6 7 78 9 6 Height H 6 8 9 Depth D 6
ELECTRONIC CONTROL & SENSORS Electronic Controller "Standard with the unit" heat recovery units are controlled with standard electronic controllers (SEC). SEC has the following features; On / Off control, different fan speed for each fan (supply & exhaust), Electrical heater control manually or automatic regarding to the set temperature, FUNCTIONAL ELECTRONIC CONTROLLER (FEC) Functional electronic controllers (FEC) are used optionally. The unit is equipped with anti-freeze thermostat and protects the heat exchanger against to freezing. Frost protection for heat exchangers Clogged filtre Air quality sensor control Carbondioxide sensor control Timer function (daily and weekly programing) By-pass damper control Connectable to BMS or VRV/VRF system It is possible to increase the air quality by using different sensors such as humidity sensor, air quality sensor and carbon dioxide sensor. The air quality is checked by the sensor and it allows to change the fan speed automatically. 7
ACCESSORIES BY-PASS CONNECTION KIT (BCK) Heat recovery units are used to transfer the heat from the exhaust air to supply air. In the transition seasons, it is much more suitable to supply the fresh air directly to indoor by not entering to the heat exchanger. By-pass connection kit allows controlling the outdoor air automatically and supplying the outdoor air directly to the indoor when it is necessary. CIRCULAR DUCT SILENCER (SLT) duct silencers are classified in two groups as SLT models for circular duct systems and LN models for rectangular duct systems. SLT models are produced with the standard diameters of spiral ducts (ø,,,, ). LN models are produced with dimensions as required. Silencers can be connected to the duct system without any accessory. Glasswool insulation is used for the damping material as standard, rockwool insulation is optinal. 8
ACCESSORIES DUCT TYPE ELECTRIC HEATER (VCE) electrical heaters have TSEK certification, CE marked and GOST-R certification. The technical specifications of products meet the essential requirements in the directives EMC 89/6/EEC and are tested according to the standards EN -, EN 6--/- for EMC. Electrical heaters are produced in mono phase or three phase upon request in standard spiral duct dimensions. The heaters have two overheating protections. The heater can be controlled manually by SEC or automatically by FEC. DUCT TYPE WATER HEATER (HWC) duct type hot water coils produced at standard capacities. High efficient heat transfer can be acquired with high performance heat exchangers. The design, providing fast and easy installation and maintenance. DUCT TYPE BAG FILTER (VFK) FLC series, circular duct type bag filter units are produced as suitable for standard spiral duct dimensions. Units have galvanized steel frame and F7 class polyester bag filter according to EN 779. High efficiency bag filters made in synthetic microfiber which has 9 C max. operational temperature and have 8% efficiency. 9
SELECTION TABLE FOR ELECTRICAL CABLE CROSS SECTION DEPENDING ON THE CABLE LENGHT FOR HEAT RECOVERY UNIT Model Power [W] Fuse [A],, [mm ] x Cable Cross Section 6 6 7 9 9 8 76 6 8 6 76 6 8 6 9 6 7 86 6 6 7 86 78 FOR ELECTRICAL HEATER Model Model Power [kw] Fuse [A] [mm ] x Cable Cross Section,, 6 6 VCE 6--G-- 6 8 9 VCE --G-- 6 7 8 68 9 FOR ELECTRICAL HEATER Model Model Power [kw] Fuse [A] VCE --G-- x 6 [mm ] x Cable Cross Section,, 6 6 7 VCE --G-- x 6 6 97 6 9 VCE -7-G-- 7 x 6 7 7 6 VCE --G-- x 9 7 VCE --G-- x 6 6 Note : - Values are maximum cable lenght in meters. Find the cable cross area by regarding the total power. If the stage contactors are inside the electrical heater, find the cable cross area by regarding the power for each step individually.
TESTS heat recovery units are tested and controlled in function and safety after the production. The technical specifications of products meets the essential requirements in the directives EMC 89 / 6 / EEC, and are tested according to the standards EN - EN 6--/- for EMC. Technical specifications meet the essential requirements in the standard EN 6- and EN 6- Leakage Current Test (TS EN 6-) High Voltage Test (TS EN 6-) Insulation Test (TS 6 EN -) Earth Bond Test (TS EN 6-) CERTIFICATION CE-Declaration of Conformity TSE Certification GOST-R Certification GOST-R Certification
Heat Recovery Unit Heat Recovery Unit With Plug Fan Heat Pump Heat Recovery Unit Energy Recovery Unit Duct Type Electrical Heater Duct Type Electrical Heater Kitchen Hood Duct Type Silencer Ventilation Ducts