On-site & Shutdown Safety Service CSE Monitoring Monitor hazardous materials, keep an eye on employees, control access checks all from a central unit: Dräger CSE Safety Monitoring supports your safety management for all critical tasks such as working in containers, silos, and tight spaces. D-3427-2014LR
02 CSE Monitoring Basic Information Complete area monitoring The CSE Monitoring System is an innovative safety solution for areas in which increased safety risks are expected due to explosion hazards and lack of oxygen or toxic gases, e.g. while working in containers, silos, and tight spaces. The system combines gas detection, video monitoring, access checks, and communication, and is individually configured according to the project requirements. All data is transferred from the respective job site to a central controller. From here, up to 24 video images may be monitored and controlled reliably by one operator. This noticeably reduces staff costs for security personnel during standstills or other safety-critical projects, all the while increasing plant safety. Individual configuration With Dräger CSE Monitoring, not only do you rent innovative safety technology, you also receive comprehensive consulting. The system is configured individually for each project and provides the best possible technical solution for your particular needs, even for ex-zones. System components for the area to be monitored: Video monitoring: application-specific cameras for industrial use, e.g. infrared day/night cameras or PZT network cameras Gas monitoring: e.g. Dräger X-zone mobile area monitor combined with Dräger X-am 5000 Access checking: ID card, RFID, or Finger Print Terminal Bidirectional communication unit Send unit: Transmission Control Unit or Mobile Data Centre Central, mobile safety centre All employees at a glance A mobile data receiver bundles all information and sends it to the central monitoring container. The received video images, measured values, communication and data from access checks are displayed, processed, and recorded on multiple monitors. The operator has everything in view and can take any action required. Eventcontrolled management software actively supports the work of the operator and enables monitoring of up to 24 monitors by one person. Full control, even in case of alarms Events like power failure, checking in or out, communication queries, or gas alarms are also displayed on the event monitor in addition to the main monitor. This makes them immediately visible to the operator, who can react quickly in case of an emergency. In case of power failure, the camera switches immediately to infrared mode so that monitoring is permanent. In addition, an emergency light switches on automatically so that the employee can leave the work area safely.
CSE Monitoring 03 Basic Information Clear communication, unmistakable warning signals Access checks in connection with bidirectional communication between persons in hazardous areas and the safety centre enable efficient implementation of the work permission ticket process. This enables employees to be warned and made aware of errors in time. Every access check includes a signal lamp, which warns against areas that are not authorised with a red signal light. Additionally, the gas warning technology features optical and acoustic alarms to warn the employee directly on-site in case of an alarm. At the same time, the alarm appears in the safety centre and is processed by the operator. Additional functions for improved monitoring and control. While viewing video recording, the Dräger CSE Monitoring Software may be used to mark unsafe situations with the click of a mouse. This enables important video sequences to be selected for purposes such as expert safety reports or retroactive analyses even days or weeks later. Overall, the system features a capacity of more than 10,000 hours of video material. Tailor-made reports CSE Monitoring delivers diverse standard reports like configuration and activity reports, visitor reports, and alarm reports. The contents of access, video, and gas reports may also be linked and adjusted to the respective needs. Use in ex-zones as well The Dräger CSE Monitoring System is frequently used for revision and standstill projects. These are characterised by shutting down and emptying the affected plant components ex-requirements do not occur in this case. Generally, Dräger CSE Monitoring may also be supplied with ATEX approval. The system is also available in large quantities at short notice. Safety through emergency power supply In the event of a power failure, the system switches to battery operation and can then be operated for an additional hour. This provides enough time to evacuate employees from the danger zone.
04 CSE Monitoring Interplay of indiv. components of the monitoring system The partial components of the system are connected to the central station via a wireless transmission device. The wireless connection has a range of up to 3.5 kilometres. Related Offerings Safety Staffing Sophisticated measurement procedures, protection of personnel, supervising of critical work or project management: For any task, we can provide you with individual experts or a complete, trained team, that is technically qualified, physically capable and with excellent social skills.
CSE Monitoring 05 Related Offerings Safety Shop The Dräger Safety Shop ensures that you always have sufficient quantities of the optimal safety equipment onsite, ready to use at any time. Our qualified personnel provides reliable and transparent management of both rental equipment and customer-owned equipment. Consultancy Our experienced occupational safety experts know where it can become dangerous at your plant and what needs to be done in order to ensure optimal occupational safety and protection. This applies to daily work as well as special challenges such as standstills.
06 CSE Monitoring Notes Not all products, features, or services are for sale in all countries. Mentioned Trademarks are only registered in certain countries and not necessarily in the country in which this material is released. Go to www.draeger.com/trademarks to find the current status. 91 01 920 17.05-1 HQ PP Subject to modifications 2017 Drägerwerk AG & Co. KGaA CORPORATE HEADQUARTERS Drägerwerk AG & Co. KGaA Moislinger Allee 53 55 23558 Lübeck, Germany www.draeger.com REGION DACH Dräger Safety AG & Co. KGaA Revalstraße 1 23560 Lübeck, Germany Tel +49 451 882 0 Fax +49 451 882 2080 info@draeger.com REGION MIDDLE EAST, AFRICA Dräger Safety AG & Co. KGaA Branch Office P.O. Box 505108 Dubai, United Arab Emirates Tel +971 4 4294 600 Fax +971 4 4294 699 contactuae@draeger.com REGION CENTRAL AND SOUTH AMERICA Dräger Panama S. de R.L. Complejo Business Park, V tower, 10th floor Panama City Tel +507 377-9100 Fax +507 377-9130 contactcsa@draeger.com REGION EUROPE Dräger Safety AG & Co. KGaA Revalstraße 1 23560 Lübeck, Germany Tel +49 451 882 0 Fax +49 451 882 2080 info@draeger.com REGION ASIA PACIFIC Draeger Singapore Pte. Ltd. 25 International Business Park #04-20/21 German Centre Singapore 609916 Tel +65 6308 9400 Fax +65 6308 9401 asia.pacific@draeger.com REGION NORTH AMERICA Draeger, Inc. 3135 Quarry Road Telford, PA 18969 Tel +1 800 4DRAGER (+1 800 437 2437) Fax +1 215 723 5935 info.usa@draeger.com Locate your Regional Sales Representative at: www.draeger.com/contact