Λευκωσία, 18 Μαϊου ΠΡΟΣ: Όλα τα Μέλη. Κυρία/ε,

Λευκωσία, 18 Μαϊου 2018 ΠΡΟΣ: Όλα τα Μέλη Κυρία/ε, Σας επισυνάπτoυμε γνωστοποιήσεις από Εθνικούς Οργανισμούς Τυποποίησης, μελών των Ευρωπαϊκών Οργανισμών Τυποποίησης CEN/CENELEC, που περιέχουν τους τίτλους προτεινόμενων εθνικών προτύπων. Σύμφωνα με την Ευρωπαϊκή Οδηγία που αφορά την πληροφόρηση σε θέματα τεχνικών προτύπων, μπορείτε, αφού μελετήσετε τους τίτλους: α) να ζητήσετε όπως λάβετε ηλεκτρονικά ολόκληρο το κείμενο του προσχεδίου εθνικού προτύπου, εάν αυτό είναι διαθέσιμο, β) να συμμετάσχετε στις συναντήσεις της τεχνικής επιτροπής του Εθνικού Οργανισμού Τυποποίησης που ετοιμάζει το προσχέδιο προτύπου και γ) να υποβάλετε εισήγηση στον CYS, να αρχίσει τυποποιητική εργασία σε Ευρωπαϊκό επίπεδο σχετικά με το θέμα της γνωστοποίησης, εάν φυσικά πιστεύετε ότι το εν λόγω εθνικό πρότυπο θα επηρεάσει την ελεύθερη διακίνηση προϊόντων ή την κυπριακή βιομηχανία και οικονομία. Τυχόν σχόλια και παρατηρήσεις παρακαλώ όπως υποβάλλονται στον Κυπριακό Οργανισμό Τυποποίησης. Σε περίπτωση που δε λάβουμε καμία ανταπόκριση, ο CYS δε θα φέρει ένσταση στην προώθηση των υπό αναφορά εθνικών προτύπων. Για περισσότερες πληροφορίες μπορείτε να επικοινωνείτε με την κα. Μαριλένα Νικολάου, Λειτουργό Διοίκησης και Διεθνών Σχέσεων του Κυπριακού Οργανισμού Τυποποίησης (CYS), τηλ: 22 411439, Φαξ. 22 411511 και στην ηλεκτρονική διεύθυνση: m.nicolaou@cys.org.cy Με εκτίμηση, Ανδρέας Ανδρέου, Διευθυντής Βιομηχανίας, για Γενικό Γραμματέα. /ΜΚ. Γρίβα Διγενή 38 & Δεληγιώργη 3, 1066, Τ.Θ. 21455, 1509 Λευκωσία, Κύπρος, Τηλ. + 357-22889860, Φαξ. + 357-22665685, E-mail: meropi@ccci.org.cy, Ιστοσελίδα:www.ccci.org.cy

Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from 2018-04-01 to 2018-04-30 Register issued on : 2018-05-16 A list of subsectors can be found at the end of this document.

Information procedure Page 2 Monthly Notifications Register Notifications registered at CCMC from 2018-04-01 to 2018-04-30 Sector A : SERVICES Register issued on : 2018-05-16

Subsector A11: SAFETY AND SECURITY Page 3 Subsector : A11 Registration Date : 2018-04-13 SN Norway ID : NOT18004/0001 13.340.60 NS 9600-1 Rope access technique Part 1: Description of system and code of practice This standard includes work using ropes as access roads to the workplace as well as positioning. This part of the standard describes key principles in order to work safely in ropes Subsector : A11 Registration Date : 2018-04-13 SN Norway ID : NOT18005/0001 13.340.60 NS 9600-2 Rope access technique Part 2: Personnel Requirements This part of NS 9600 determines admission criteria and syllabus for requirements for training of personnel in rope access techniques. Subsector : A11 Registration Date : 2018-04-13 SN Norway ID : NOT18006/0001 13.340.60 NS 9600-3 Rope access techniques Part 3: Syllabus This part of NS 9600 standard determines training plans for the various courses the standard includes. It also describes requirements for assistant period. The training plans describe which topics the individual courses should contain and provide learning objectives and educational method for each topic. Subsector : A11 Registration Date : 2018-04-13 SN Norway ID : NOT18007/0001 13.340.60

Page 4 NS 9600-4 Rope access techniques Part 4: Requirements for training and assessment facilities This part of NS 9600 standard sets requirements for training companies. Subsector : A11 Registration Date : 2018-04-13 SN Norway ID : NOT18008/0001 13.340.60 NS 9600-5 Rope access techniques Part 5: Requirements for businesses that offer services This part of NS 9600-5 imposes requirements on companies that offer services using work in rope as a method. Subsector : A11 Registration Date : 2018-04-13 SN Norway ID : NOT18009/0001 13.340.60 NS 9600-6 Rope access techniques Part 6: Requirements for certification and certification bodies This part of NS 9600-6 sets requirements for: a) certification bodies and their certification processes; b) certification of businesses; c) personal certification Subsector A99: UNDETERMINED Subsector : A99 Registration Date : 2018-04-24 SN Norway ID : NOT18011/0001 03.100.01 NS 11202 Diversity management systems Guidance Guidance to management systems relating to diversity for the use by all types of organizations.

** End of Sector ** Page 5

Information procedure Page 6 Monthly Notifications Register Notifications registered at CCMC from 2018-04-01 to 2018-04-30 Sector B : BUILDING AND CONSTRUCTION Register issued on : 2018-05-16

Subsector B01: FIRE PROTECTION Page 7 Subsector : B01 Registration Date : 2018-04-24 SFS Draft Issue Date : 2018-03-15 Finland Latest Date for Comments : 2018-05-16 ID : 0000E504/0001 Draft for public enquiry REV/AMD SFS 7025 Characteristics and requirement levels of powered smoke and heat exhaust ventilators in different applications Subsector B02: STRUCTURES Subsector : B02 Registration Date : 2018-04-18 DIN Germany ID : 11904289/0001 11904289 Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 2: Equipment for separation and treatment of mineral solids such as grit Subsector B05: FIRE TESTS Subsector : B05 Registration Date : 2018-04-24 UNI Italy ID : 01604413/0001 13.220.50 UNI1604413 Reaction to fire of upholstered products by applying a small flame - Test method and classification This standard describes a method for the assessment of combustion of product in the presence or not of a flame and/or incandescence and/or smoke. The method also provides an indication about the fire reaction of a piece of product during the initial phase of a fire, under the action of an ignition source of a limited extent. REV/AMD UNI 9175:2010 Subsector B08: DOORS AND WINDOWS

Subsector : B08 Registration Date : 2018-04-20 TSE Turkey ID : t2001905/0001 91.060.50 Prefabricated Wooden Doors This standard specifies classification, properties, sampling, testing and marking of wooden doors Page 8 Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT Subsector : B25 Registration Date : 2018-04-24 UNI Italy ID : 01604414/0001 75.060, 91.140.40 UNI1604414 Gas Infrastructures - Pipelines for maximum operating pressure up to and including 0,5 MPa (5 bar) - Service lines Design, construction, testing, operation, maintenance and rehabilitation This standard specifies criteria for design, construction, testing, operation, maintenance and rehabilitation of service lines with maximum operating pressure up to and including 0,5 MPa (5bar),suppliedbydistributionnetworkofI,IIandIIIgasfamilyaccordingtoEN437. This standard applies also to existing pipelines, only for parts subjected to substantial modificationsrelatingtooperatingpressureand/orpipelineslayout. REV/AMD UNI 9860:2006 Subsector : B25 Registration Date : 2018-04-24 UNI Italy ID : 01604416/0001 91.140.40 UNI1604416 Gasplantsforciviluses Criteriafortestandrestorationofthetightnessofgasinstallations Generalprescriptionsandrequirementsforthesecondandthirdgasfamily This Standard defines tightness requirements of gas installations plants and value limits for small leaks; requirements to perform plant tightness, methods to achieve value of gas leaks; criteria to define suitability of plants tightness; procedures to restore plant tightness REV/AMD UNI 11137:2012

Page 9 Subsector : B25 Registration Date : 2018-04-24 UNI Italy ID : 01604418/0001 27.100, 91.140.40 UNI1604418 Gas-fired heating boilers of nominal heat input not exceeding 35 kw - Inspection and maintenance This standard provides operations to be carried out on gas fired boilers foreseen for ambient heating and/or domestic hot water production, having a heat input not exceeding 35 kw REV/AMD UNI 10436:1996 Subsector : B25 Registration Date : 2018-04-18 DIN Germany ID : 03200814/0001 03200814 Gas tapping valves with and without shut down device for polyethylene lines Subsector : B25 Registration Date : 2018-04-12 UNE Spain Latest Date for Comments : 2018-05-22 ID : P0047619/0001 Draft for public enquiry PNE 60310:2015/1M Gas supply pipelines for maximum operating pressure above 5 bar and up to and including 16 bar. This standard establishes the technical requirements and minimum safety measures that must be implemented during design, construction and operation of gas distribution pipelines for maximum operating pressure above 5 bar and up to and including 16 bar. REV/AMD UNE 60310:2015 Subsector : B25 Registration Date : 2018-04-12 UNE Spain Latest Date for Comments : 2018-05-22 ID : P0047621/0001 Draft for public enquiry PNE 60311:2015/1M Gas supply pipelines for maximum operating pressure up to and including 5 bar. This standard establishes the technical requirements and minimum safety measures that must be implemented during design, construction and operation of gas distribution

Page 10 pipelines for maximum operating pressure up to and including 5 bar. REV/AMD UNE 60311:2015 Subsector B33: BUILDING DESIGN Subsector : B33 Registration Date : 2018-04-12 UNE Spain Latest Date for Comments : 2018-05-22 ID : P0041878/0002 Draft for public enquiry PNE 41531 IN Accessibility of the immovable Cultural Heritage. General criteria and methodology. This Technical Report is a tool for the accessibility of the immovable Cultural Heritage. It provides criteria for architectonic and building intervention, as well as a methodology for its application. To assure the effectiveness of the accessibility, it applies to the immovable Cultural Heritage and also to its surroundings, regarding restoration, rehabilitation and accessibility interventions. Accessibility solutions related to management, organisation or functionality are excluded fromthescopeofthistechnicalreport. This Technical Report is a tool for the different agents involded: owners of the immovable Cultural Heritage, public administration, facility managers, conservators, restorers, designers, builders,etc. Subsector B99: UNDETERMINED Subsector : B99 Registration Date : 2018-04-18 DIN Germany ID : 00517824/0001 00517824 Fixed ladders for construction works - Safety requirements and tests - Part 2: Ladders with one upright Subsector : B99 Registration Date : 2018-04-18 DIN Germany ID : 00518186/0001

Page 11 00518186 Sports grounds - Part 2: Irrigation Subsector : B99 Registration Date : 2018-04-18 DIN Germany ID : 00518228/0001 00518228 Sealing of outside wall joints with impregnated sealing tapes made of cellular plastics - Impregnated sealing tapes - Requirements and testing Subsector : B99 Registration Date : 2018-04-18 DIN Germany ID : 00518270/0001 00518270 Sport halls - Halls and rooms for sports and multi-purpose use - Part 7: Testing of impact protection surface systems Subsector : B99 Registration Date : 2018-04-24 UNI Italy ID : 01604507/0001 93.010 UNI1604507 Rockfall protective measures Part 5: Inspection, Monitoring, Maintenance and role of Managers The Technical Report establishes operating criteria for inspections, monitoring and maintenance of rockfall protective measures and defines the specific role of the managers of the works. Subsector : B99 Registration Date : 2018-04-05 NEN Netherlands ID : 50002066/0001

Page 12 91.140.01, 91.140.40, 91.140.50, 91.140.60 NEN 8025:2005 Concept nl Periodical safety assessment of technical installations and technical supplies in buildings voor living NEN 8025 is applicable for the assessment of technical installations and user supplies in dwellings. Subsector : B99 Registration Date : 2018-04-05 NEN Netherlands ID : 50002067/0001 29.120.30, 91.140.50 NEN 1020:2018 Concept nl Plugs and socket-outlets for household and similar general purposes Plugs and socket-outlets for household and similar general purposes Subsector : B99 Registration Date : 2018-04-05 NEN Netherlands ID : 50002068/0001 07.060, 91.120.10, 91.140.30 NEN 5060:2018 nl Hygrothermal performance of buildings - Climatic reference data Hygrothermal performance of buildings - Climatic reference data Subsector : B99 Registration Date : 2018-04-25 UNMS SR Slovakia ID : 73803718/0001 93.080.10 STN 73 6121/Z1 Road building. Asphalt Pavement Courses. Amendment 1 The objective of the task is to remove inconsistency with STN EN 12591 and STN EN 12697 REV/AMD STN 73 6121 Subsector : B99 Registration Date : 2018-04-25

UNMS SR Slovakia Page 13 ID : 73803818/0001 93.080.20 STN 73 6242/Z2 Pavements and road bridges. Design and material specification. Amendment 2 The objective of the task is to remove inconsistency with STN EN 13589 and STN EN 13703. REV/AMD STN 73 6242 Subsector : B99 Registration Date : 2018-04-17 SN Norway ID : NOT18010/0001 01.040.91 NS 3467 Stages and deliverables in the building process The standard will be a framework for the design and construction process, and describe the deliverables in each stage of the process. Subsector : B99 Registration Date : 2018-04-20 TSE Turkey ID : t1008737/0002 91.040.01 Building Licence This standard covers the building licence ** End of Sector **

Information procedure Page 14 Monthly Notifications Register Notifications registered at CCMC from 2018-04-01 to 2018-04-30 Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS Register issued on : 2018-05-16

Subsector C01: Food products Page 15 Subsector : C01 Registration Date : 2018-04-24 UNI Italy ID : 01604373/0001 67.080.01 UNI1604373 Fruit and vegetables Preservation in controlled atmosphere - Technical requirements This standard defines the technical requirements for the design, installation and operation of controlled atmosphere storage systems. This standard applies to different plant species. It doesnotapplyto products stored in modified or protective atmosphere. REV/AMD UNI 10193:1993 Subsector : C01 Registration Date : 2018-04-05 NEN Netherlands ID : 50002069/0001 67.100.01 NEN 6815:2018 Concept nl Milk and milk products - Detection of the content of lactobacilli Describes the determination of the content of lactobacilli in milk and milk products. Lactobacilli forms an indication of the hygiene particularly of cheese and cheese products during the production process. Subsector : C01 Registration Date : 2018-04-20 TSE Turkey ID : t1003272/0001 67.100.30 Kashar cheese This standard specified kashar cheese Subsector : C01 Registration Date : 2018-04-20 TSE Turkey ID : t1013358/0002 67.100.30

Page 16 Lor cheese This standard specified lor cheese. It does not specy cottoge cheese and skim-milk cheese. Subsector : C01 Registration Date : 2018-04-20 TSE Turkey ID : t4007800/0001 67.140.30 Chocolate This standard specifies chocolate. Subsector C02: PAINTS AND RELATED PRODUCTS Subsector : C02 Registration Date : 2018-04-18 DIN Germany ID : 06235155/0001 77.060 DIN 50918 Corrosion of metals - Electrochemical corrosion tests Subsector C03: CHEMISTRY Subsector : C03 Registration Date : 2018-04-12 UNE Spain Latest Date for Comments : 2018-05-22 ID : P0047992/0001 Draft for public enquiry PNE 84654 Cosmetic raw materials. Plant extracts. Rosemary hydroglycolic extract (Rosmarinus officinalis L.). This standard defines the specifications required to rosemary hydroglycolic extract for use in cosmetics REV/AMD UNE 84654:2011

Page 17 Subsector : C03 Registration Date : 2018-04-12 UNE Spain Latest Date for Comments : 2018-05-22 ID : P0049501/0001 Draft for public enquiry PNE 84766 Cosmetic raw materials. Plant extracts. Cucumber hydroglycolic extract (Cucumis sativus L.) This standard defines the specifications required to cucumbrer hydroglycolic extract for use in cosmetics REV/AMD UNE 84766:2011 Subsector C06: ESSENTIAL OILS Subsector : C06 Registration Date : 2018-04-12 UNE Spain Latest Date for Comments : 2018-05-22 ID : P0047611/0001 Draft for public enquiry PNE 84698 Cosmetic raw materials. Sunscreens. Diethylhexyl butamido triazone. This standard defines the physico-chemical characteristics required to diethylhexyl butamido triazone for use in cosmetics REV/AMD UNE 84698:2007 Subsector C13: FERTILIZERS Subsector : C13 Registration Date : 2018-04-25 AFNOR France ID : 00207900/0001 PRNFU44-203 Mixed fertilizers Calcium and/or magnesium liming materials Types and specifications Subsector : C13 Registration Date : 2018-04-25 AFNOR France ID : 00207901/0001

Page 18 PRNFU42-001-1/A1 Fertilizers Designations and specifications Part 1: Inorganic fertilizers Subsector : C13 Registration Date : 2018-04-25 AFNOR France ID : 00207902/0001 PRNFU42-001-2/A2 Fertilizers Designations and specifications Part 2: Organic fertilizers ** End of Sector **

Information procedure Page 19 Monthly Notifications Register Notifications registered at CCMC from 2018-04-01 to 2018-04-30 Sector F : FUNDAMENTAL STANDARDS Register issued on : 2018-05-16

Subsector F06: TERMINOLOGY PRINCIPLES Page 20 Subsector : F06 Registration Date : 2018-04-18 DIN Germany ID : 10500699/0001 10500699 Systems of concepts and their presentation Subsector F07: DOCUMENTATION AND INFORMATION Subsector : F07 Registration Date : 2018-04-18 DIN Germany ID : 00900117/0001 00900117 Classification systems - establishment and development of classification systems Subsector : F07 Registration Date : 2018-04-05 NEN Netherlands ID : 50002065/0002 01.140.30 NPR 1889:2018 Concept nl Tables with NEN 1888 and NEN 5825 - General personal information and addresses - Definitions, character sets and interchange formats Tables with NEN 1888 and NEN 5825 - General personal information and addresses - Definitions, character sets and interchange formats Subsector F15: MATERIAL TESTING IN GENERAL Subsector : F15 Registration Date : 2018-04-25 AFNOR France ID : 00207472/0001 prnft 70-503

Energetic materials for defense Safety, vulnerability Friction sensitivity test BAM test Page 21 Subsector : F15 Registration Date : 2018-04-25 AFNOR France ID : 00207473/0001 prnft70-501 Energetic materials for defense - Safety, vulnerability - Determination of impact sensitivity - Test with 30 kg fallhammer Subsector : F15 Registration Date : 2018-04-18 DIN Germany ID : 06235356/0001 06235356 Viscosimetry; capillary viscometers with circular and rectangular cross section for determination of flow curves; principles, concepts, definitions Subsector : F15 Registration Date : 2018-04-18 DIN Germany ID : 06235362/0001 06235362 Testing of lubricants - Test methods - Part 4: Determination of vegetable oil fraction in used diesel motor oils using infrared spectrometry Subsector : F15 Registration Date : 2018-04-18 DIN Germany ID : 06235364/0001 06235364 Headform impact test with deceleration measurement on glass and plastic safety glass

for vehicle glazing Page 22 Subsector F17: ADMINISTRATIVE DOCUMENTS Subsector : F17 Registration Date : 2018-04-24 SFS Draft Issue Date : 2018-04-04 Finland Latest Date for Comments : 2018-06-04 ID : 0000E506/0001 Draft for public enquiry, programme and portfolio management -- Guidance on governance ** End of Sector **

Information procedure Page 23 Monthly Notifications Register Notifications registered at CCMC from 2018-04-01 to 2018-04-30 Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE Register issued on : 2018-05-16

Subsector H09: FURNITURE Page 24 Subsector : H09 Registration Date : 2018-04-25 AFNOR France ID : 00208049/0001 PR FN 62-100-1 Furniture - Domestic use fixed platform mezzanine beds - Safety specifications and tests - Part 1 : safety specifications Subsector : H09 Registration Date : 2018-04-25 AFNOR France ID : 00208050/0001 PR NF D62-100-2 Furniture - Domestic use fixed platform mezzanine beds - Safety specifications and tests - Part 2 : test methods Subsector H13: JEWELLERY Subsector : H13 Registration Date : 2018-04-24 UNI Italy ID : 01604514/0001 39.060 UNI1604514 Gemmological materials - Classification of cutting styles and forms The standard enacts the general principles conducive to a univocal enforcement of the nomenclature referred to the following topics concerning the cutting operations of gemologicalmaterials: -morphologicalfeaturesofpolishedstones; -cuttingstylesandtheirpertainingcomponentparts; -formtypes; -finishfeatures -drillingofstones:types. The standard applies whenever cutting operations are used on gemological materials of any kind. REV/AMD UNI 10173:1993

Subsector H17: OIL STOVES Page 25 Subsector : H17 Registration Date : 2018-04-11 PKN Poland ID : 13701166/0002 27.060.10, 97.100.40 prpn-m-40648 Electronic controlled fireplaces powered by liquid fuels -- Decorative devices producing flame by using ethanol based fuel in liquid state -- Use in public use directed buildings Present norm applies to electronically controlled, decorative fireplaces/appliances used in public facilities (hotels, restaurants, lobbies, receptions etc.), producing flame with use of ethanol-based liquid fuel. NOTE 1: Present norm applies to free-standing and built-in (separated from the building construction) with strictly defined housing requirements (air exchange rate and minimum volume of the room). NOTE 2: Present norm applies to appliances of any heat output in accordance with specification provided by manufacturer including air exchange rate and room volume. ** End of Sector **

Information procedure Page 26 Monthly Notifications Register Notifications registered at CCMC from 2018-04-01 to 2018-04-30 Sector I : MECHANICAL ENGINEERING Register issued on : 2018-05-16

Subsector I12: PULLEYS & BELTS Page 27 Subsector : I12 Registration Date : 2018-04-18 DIN Germany ID : 04500723/0001 04500723 Conveyor belts for coalmining; determination of the oxygen index Subsector I13: GAS CONTAINERS Subsector : I13 Registration Date : 2018-04-18 DIN Germany ID : 01601053/0001 01601053 Gas cylinder valves for cylinder test pressures up to 300 bar - Valve inlet and outlet connections Subsector I19: NUCLEAR ENERGY Subsector : I19 Registration Date : 2018-04-18 DIN Germany ID : 06234978/0001 06234978 Measurements of surface contamination on vehicles and their loadings in exceptional situations requiring radiation protection measures Subsector : I19 Registration Date : 2018-04-12 UNE Spain Latest Date for Comments : 2018-05-22 ID : P0045528/0001 Draft for public enquiry PNE 73302 Ionizing radiation symbols

Page 28 The purpose of this standard is to establish the characteristics of the signs for posting areas andthelabelsformaterialsandcontainerswheretherecanbearadiationderivedrisk. These signs and labels are to be used, where applicable, to mark radiation areas as well as to label radioactive materials and/or their containers in nuclear and radioactive facilities and containersfortransportationofthoseradioactivematerialsoutsidethem. REV/AMD UNE 73302:1991 Subsector I22: VACUUM TECHNOLOGY Subsector : I22 Registration Date : 2018-04-18 DIN Germany ID : 06003847/0001 06003847 Vacuum technology; acceptance specifications for liquid ring vacuum pumps Subsector I31: VALVES Subsector : I31 Registration Date : 2018-04-24 UNI Italy ID : 01604451/0001 13.240 UNI1604451 Type testing for the performance assessment of safety devices for protection against excessive pressure The standard defines the procedures for carrying out type tests to assess the performance of reclosing, non-reclosing and combined safety devices for protection against excessive pressure, as specified in the relevant parts of UNI EN ISO 4126 Subsector I40: INDUSTRIAL PIPING NETWORKS Subsector : I40 Registration Date : 2018-04-18 LVS Draft Issue Date : 2018-04-19 Latvia Latest Date for Comments : 2018-06-20 ID : 00058775/0001 23.040.01 prlvs 1054

Page 29 Gas infrastructure. Construction documentation, content, presentation, equipment (devices) plans and markings for natural gas pipelines systems with pressure up to 1,6 MPa (16bar) Standard defines common principles and requirements for development of construction documentation for gas infrastructure with pressure up to 1,6 Mpa ** End of Sector **

Information procedure Page 30 Monthly Notifications Register Notifications registered at CCMC from 2018-04-01 to 2018-04-30 Sector M : METALLIC MATERIALS Register issued on : 2018-05-16

Subsector M10: METALLIC COATINGS Page 31 Subsector : M10 Registration Date : 2018-04-24 UNI Italy ID : 01604446/0001 25.220.50 UNI1604446 Method for determining the fish-scale susceptibility in steel for enamelling The standard specifies a method for measuring the hydrogen diffusion coefficient in order to determine the fish-scale susceptibility of steels which can be used in the enamelling process. The standard applies to low carbon and decarburized cold-rolled steel, which has been calmedwithaluminuminathicknessrangeof0.30mmto1.20mm. Subsector : M10 Registration Date : 2018-04-18 DIN Germany ID : 06235365/0001 06235365 Determination of the inhibiting effect of pickling inhibitors - Part 1: Inhibition of the removal of ferrous materials Subsector M15: METALLIC CORROSION Subsector : M15 Registration Date : 2018-04-18 DIN Germany ID : 06235373/0001 06235373 Corrosion of metals and alloys - Guidelines for selection of accelerated corrosion test for product qualification ** End of Sector **

Information procedure Page 32 Monthly Notifications Register Notifications registered at CCMC from 2018-04-01 to 2018-04-30 Sector N : NON-METALLIC MATERIALS Register issued on : 2018-05-16

Subsector N01: PAPER AND BOARD Page 33 Subsector : N01 Registration Date : 2018-04-24 UNI Italy ID : 01604513/0001 85.060 UNI1604513 Paper and board Analysis of recyclability of cellulose-based materials and products The standard specifies a method to determine the laboratory-scale recyclability of cellulosebased materials and products, simulating some of the main phases of the industrial productionofnewpaperandboardobtainedprocessingpaperforrecycling. The method specified in the standard allows to analyze process parameters (pulping, coarse rejects, flakes and adhesive particle content) and quality parameters of the new material obtainedrecyclingthefibers(sheetformingandopticalinhomogeneities). The standard applies only to paper and board, intended as materials which are mainly based oncellulosefibers,andtoproductsconsistingmainlyofsuchmaterials. The standard does not take into account further specifications necessary for the processing of paper for recycling by means of de-inking technology. Subsector N02: SOLID FUELS Subsector : N02 Registration Date : 2018-04-18 DIN Germany ID : 06235363/0001 06235363 Solid recovered fuels - Obtaining representative laboratory samples from heterogeneous materials by bale sampling Subsector N03: PETROLEUM PRODUCTS Subsector : N03 Registration Date : 2018-04-25 AFNOR France ID : 00207829/0001 PR NF T60-122 Petroleum products Transparent and opaque liquids Determination of kinematic viscosity by automated Houillon viscometer

Page 34 Subsector : N03 Registration Date : 2018-04-18 DIN Germany ID : 06234862/0001 75.100 DIN 51807-1 Testing of lubricants - Test of the behaviour of lubricating greases in the presence of water - Part 1: Static test Subsector N06: RUBBER Subsector : N06 Registration Date : 2018-04-24 UNI Italy ID : 01604515/0001 01.040.83, 83.060 UNI1604515 Elastomers Terms and definitions The standard defines, in systematic order, a series of terms used in the rubber industry, groupedasfollows: -rawmaterials,auxiliarymaterialsandbasicnotions; -tests; -processesformanufacturing,transformationandequipment. Thetermsarealsotranslatedintheorder,English,FrenchandGerman. The standard applies only to terms in general use in the rubber industry. REV/AMD UNI 7406:1975 Subsector N09: PLASTICS Subsector : N09 Registration Date : 2018-04-24 UNI Italy ID : 01604480/0001 83.140.20 UNI1604480 Decorative continuous laminates based on thermosetting resins (generally called continuous laminates - CPL) - Part 1: General This standard classifies continuous decorative laminates (CPL) based on their performance andapplicationfields. CPLs are coating materials for internal use, intended to be glued onto supports. Depending on the type, they can be used in the furniture sector for the realization of various parts of furniture (such as paneling, backsplashes, doors and worktops), interior design (such as

edges, profile coatings, doors and window sills) as well as in the field of construction and transport as surfaces for covering rigid vertical elements (walls and partitions), composite materials(sandwichpanels)orfloors. Page 35 Subsector : N09 Registration Date : 2018-04-24 UNI Italy ID : 01604481/0001 83.140.20 UNI1604481 Decorative continuous laminates based on thermosetting resins (generally called continuous laminates - CPL) - Part 2: Test method This standard defines the test methods for determining the properties of continuous decorativelaminates(cpl). These methods are aimed at evaluating the characteristics of the CPLs whose performances arespecifiedinpart3. Subsector : N09 Registration Date : 2018-04-24 UNI Italy ID : 01604482/0001 83.140.20 UNI1604482 Decorative continuous laminates based on thermosetting resins (generally called continuous laminates - CPL) - Part 3: Specifications This standard establishes a classification system for CPLs as well as performance levels. This Part 3 of the standard also specifies the requirements for the properties of the various types of CPL. CPLs are primarily intended for use as a decorative coating surface in the field of furniture, interior design and flooring. Subsector N14: PLASTICS PIPES Subsector : N14 Registration Date : 2018-04-24 UNI Italy ID : 01604237/0001 23.040.20, 25.160.30 UNI1604237 Field welding machines by the heated tools for polyethylene pipes and/or fittings butt joints for gas, water and others pressure fluids pipelines - Construction, test and maintenance requirements, documentation

Page 36 The standard specifies the minimum constructive and functional requirements and the methods to be adopted in the construction, testing and maintenance of construction site welding machines and contact heating elements used to make butt joints of pipes and / or polyethylene fittings ( PE), used for the transport of gas, water and other fluids under pressure. The standard integrates the requirements of the UNI ISO 12176-1 by introducing further technical characteristics able to guarantee a better quality of the welds. The standard applies to the field welding machines by heated tools for contact for pipes with dn less than or equal to1600mmandthicknesseslessthanorequalto130mm Subsector : N14 Registration Date : 2018-04-18 DIN Germany ID : 05401957/0001 05401957 Crosslinked polyethylene (PE-X) pipes - General quality requirements, testing Subsector : N14 Registration Date : 2018-04-18 DIN Germany ID : 05401960/0001 05401960 Crosslinked polyethylene (PE-X) pipes - Dimensions Subsector N20: CERAMICS Subsector : N20 Registration Date : 2018-04-18 DIN Germany ID : 06235344/0001 06235344 Testing of ceramic raw and basic materials - Acid pressure digestion of ash residues after combustion of carbon and graphite materials

** End of Sector ** Page 37

Information procedure Page 38 Monthly Notifications Register Notifications registered at CCMC from 2018-04-01 to 2018-04-30 Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT Register issued on : 2018-05-16

Subsector S01: ACOUSTICS AND SOUND INSULATION Page 39 Subsector : S01 Registration Date : 2018-04-18 DIN Germany ID : 00100952/0001 00100952 Acoustics - Determination of aircraft noise exposure at airports - Part 2: Evaluation and generation of additional input data for calculation - Trajectory data Subsector S05: DENTISTRY Subsector : S05 Registration Date : 2018-04-18 DIN Germany ID : 01402270/0001 01402270 Dentistry - Abrasion testing for sealers Subsector S08: AIR QUALITY Subsector : S08 Registration Date : 2018-04-25 AFNOR France ID : 00207333/0001 PR NF X46-100 Asbestos survey - Survey of materials and products containing asbestos in XXX - Mission and methodology Subsector : S08 Registration Date : 2018-04-30 PKN Poland ID : 15901553/0001 13.040.30 prpn-z-04498 Air purity protection -- Determination of diethyl phthalate in workplaces by gas

Page 40 chromatography with flame-ionization detection This standard gives a method for the determination of the content of diethyl phthalate (CAS: 84-66-2) in workplace air by gas chromatography with flame-ionization detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of diethyl phthalate which can be determined by the method in the sampling and determination conditions specified in the standard is 0,3 mg/m3 Subsector : S08 Registration Date : 2018-04-30 PKN Poland ID : 15901554/0001 13.040.30 prpn-z-04499 Air purity protection -- Determination of phthalic anhydride in workplaces by high performance liquid chromatography with spectrophotometric detection This standard gives a method for the determination of the content of phthalic anhydride (CAS: 85-44-9) in workplace air by high performance liquid chromatography with spectrophotometric detection. The method is applicable during control of the hygienicsanitary conditions. The lowest concentration of phthalic anhydride which can be determined by the method in the sampling and determination conditions specified in the standard is 0,1 mg/m3 Subsector : S08 Registration Date : 2018-04-30 PKN Poland ID : 15901555/0001 13.040.30 prpn-z-04500 Air purity protection -- Determination of 4-chloroaniline in workplaces by high performance liquid chromatography with spectrophotometric detection This standard gives a method for the determination of the content of 4-chloroaniline (CAS: 106-47-8) in workplace air by high performance liquid chromatography with spectrophotometric detection. The method is applicable during control of the hygienicsanitary conditions. The lowest concentration of 4-chloroaniline which can be determined by the method in the sampling and determination conditions specified in the standard is 0,005 mg/m3 Subsector : S08 Registration Date : 2018-04-30 PKN Poland ID : 15901556/0001

Page 41 13.040.30 prpn-z-04501 Air purity protection -- Determination of 1,2-dichloroethane in workplaces by gas chromatography with flame-ionization detection This standard gives a method for the determination of the content of dichloroethane (CAS: 107-06-2) in workplace air by gas chromatography with flame-ionization detection. The method is applicable during control of the hygienic-sanitary conditions.the lowest concentration of dichloroethane which can be determined by the method in the sampling and determination conditions specified in the standard is 0,82 mg/m3 (for air volume 12 l). Subsector : S08 Registration Date : 2018-04-30 PKN Poland ID : 15901557/0001 13.040.30 prpn-z-04502 Air purity protection -- Determination nickel and its compounds in workplaces by flame atomic absorption spectrometry This standard gives a method for the determination of the content nickel and its compounds (CAS: 7440-02-0) with the exception of nickel tetracarbonyl in workplaces air by flame atomic absorption spectrometry. The method is applicable during control of the hygienicsanitary conditions. The lowest concentration nickel and its compounds as nickel, which can be determined by the method in the sampling and determination conditions specified in the standard is 0,0014 mg/m3 (for air volume 720 l) Subsector : S08 Registration Date : 2018-04-30 PKN Poland ID : 15901558/0001 13.040.30 prpn-z-04503 Air purity protection -- Determination soluble compounds of silver in workplaces by flame atomic absorption spectrometry This standard gives a method for the determination of the content soluble compounds of silver in workplaces air by flame atomic absorption spectrometry. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration soluble compounds of silver, as silver, which can be determined by the method in the sampling and determination conditions specified in the standard is 0,001 mg/m3 (for air volume 720 l) ** End of Sector **

Information procedure Page 42 Monthly Notifications Register Notifications registered at CCMC from 2018-04-01 to 2018-04-30 Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING Register issued on : 2018-05-16

Subsector T06: METAL AND PLASTIC CONTAINERS Page 43 Subsector : T06 Registration Date : 2018-04-25 AFNOR France ID : 00208046/0001 PR NF T57-950-1 Sandwich panels for industrial road transport bodywork and fixed cells Part 1: Acceptability criteria for sandwich panels with skins made from thermoset? matrix fibre reinforced composite Subsector T14: PACKAGING Subsector : T14 Registration Date : 2018-04-18 DIN Germany ID : 11501210/0001 11501210 Marking of packaging and packaging materials for recycling purposes - Plastics packaging and packaging materials Subsector T19: ROAD SAFETY Subsector : T19 Registration Date : 2018-04-24 UNI Italy ID : 01604372/0001 93.080.30 UNI1604372 Materials for vertical signs - Performance of retroreflective microprismatic materials for vertical signs This standard specifies minimum performance requirements and relevant test methods for retroreflective microprismatic materials used for vertical road signs and other road safety equipment.this standard specifies minimum performance requirements and relevant test methods for retroreflective microprismatic materials used for vertical road signs and other road safety equipment. REV/AMD UNI 11122:2004 ** End of Sector **

List of non-electrotechnical subsectors 2011-06 Sector A: Services Subsector Title ISO/TC CEN/TC reference reference A01 Tourist services / 329; CEN/WS ETO A02 Cleaning services / 328 A03 Postal services / 331 A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM A05 Maintenance services / 319 A06 Building and construction services / 330 A07 Translation services / A08 Funeral services / CEN/BT/TF 139 A09 Facility management / 348 A10 Services of Real Estate Agents / CEN/BT/TF 180; 373 A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4 A12 Consultancy Services / 395; 381 A13 Expertise Services / 405 A14 Aesthetic Services / 403;409 A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction Subsector Title ISO/TC CEN/TC reference reference B01 Fire protection 21 70; 72; 191; 192 B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340 B03 Concrete 71 104; CEN/WS 009 B04 Cement 74; 77 51 B05 Fire tests 92 127 B06 Gypsum / 241 B07 Glass 160 129 B08 Doors and windows 162 33 B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036 B10 Timber structures 165 124 B11 Metal structures 167 135 B12 Masonry 179; 196 125; 246 B13 Solar energy 180 312 B14 Geotechnics 182 341; 396 B15 Sanitary appliances / 163; 7 B16 Taps / / B17 Lighting equipment and lighting / 50; 169 application technology B18 Scaffolding / 53 B19 Ceramic tiles 189 67 B20 Drainage equipment / 165 B21 Baths / / B22 Wallcoverings / 99 B23 District heating / 107 B24 Auxiliary and handicraft work / / B25 Gas distribution installation and / 234; 235; 282 related equipment B26 Road building and maintenance / 178; 227 B27 Waterproofing materials / 128; 254; 361; 314 B28 Floor coverings 38/SC 12 134 B29 Aggregates / 154 B30 Floor and surfacing / 217; 303; 323; 390 B31 Heating systems in buildings / 228; 247 B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388 B34 Building and construction Environmental aspect 350; 351 B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products Subsector Title ISO/TC CEN/TC reference reference C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054 C02 Paints and related products 35 139; 298; 173 C03 Chemistry 47 317; 363 C04 Laboratory glassware 48 332 C05 Lac / / C06 Essential oils 54 / C08 Pesticides 81 / C09 Surfactants 91 276 C10 Starch 93 / C11 Tobacco 126 401 C12 Glass plant / / C13 Fertilizers 134 223; 260 C16 Wood preservatives / / C17 Trees and plants / / C18 Adhesives / 193 C19 Chemical analysis 201; 202 382; 347 C20 Explosives and firework / 212; 321 C21 Cosmetics 217 392 C22 Bio-Based products / 411 C99 Undetermined / 386

Sector F: Fundamental standards Subsector Title ISO/TC CEN/TC reference reference F01 Technical drawings 10 / F02 Units & symbols 12 / F03 Preferred numbers 19 / F04 Sieves 24 / F05 Measuring instruments 30; 113 92; 171; 176; 237; F06 Terminology principles 37 / 294; 318; 244; 367; 141; CEN/WS 011 F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368 F08 Surfaces / 290 F09 Banking 68 / F10 Statistics 69 / F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365 F13 Environmental tests / / F14 Graphical technology, 130 / sign-boards and nameplates F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033 F16 Graphical symbols 145 / F17 Administrative documents 154 CEN/WS MMU F18 Micrographics 171 / F19 Optics 172; 187 123; 170 F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362 F21 Value analysis and project / 279 network F22 Logistics / 379; 273 F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027 F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use Subsector Title ISO/TC CEN/TC reference reference H01 Cinematography 36 372 H02 Photography 42 / H03 Consumer questions / 291 H04 Sports equipment 83 136 H05 Oil and gas burners / 47; 131 H06 Horology 114 / H07 Space heating 116 62; 110; 130; 179; 180 H08 Sizing systems 133; 137 / H09 Furniture 136 207 H10 Sewing machines 148 / H11 Heater controls 161 58 H12 Ceramic and glass-ware for food 166 / H13 Jewellery 174 CEN/WS 047 H14 Caravans 177 245 H15 Toys 181 52 H17 Oil stoves / 46 H18 Central heating boilers / 48; 57; 109; 269 H19 Non-electric cookers and barbecues / 49; 281; 295 H22 Smokers lighters and matches / 355; 87 H23 Ladders / 93 H24 Tactile danger warnings / / H25 Large gas appliances / 106; CEN/CLC/JWG FCGA H26 Sealing materials / 108; 208 H27 Educational equipment / / H28 Hunting 191 / H29 Heat pumps / 113 H30 Equipment for children / 252 H31 Dedicated LPG appliances / 181 H32 Culinary utensils 186 194 H33 Footwear (excluding protective / 309 footwear) H34 Child safety / CEN/BT/WG 117 398 H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering Subsector Title ISO/TC CEN/TC reference reference I01 Screw threads 1 / I02 Fasteners 2 185 I03 Limits & fits / / I04 Rolling bearings 4 / I05 Iron pipes 5 203 I06 Pressure vessels 11 54 I07 Shafts 14 / I08 Agricultural machines 23 144, 334 I09 Small tools 29 213 I10 Splines / / I11 Machine tools 39 142; 143; 145; 255 I12 Pulleys & belts 41 188 I13 Gas containers 58 23; 286 I14 Gears 60 / I15 Equipment for petroleum industry 67 12 I16 Internal combustion engines 70; 192 270 I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025 I18 Mining 82 196 I19 Nuclear energy 85 / I20 Refrigeration 86 44; 182 I21 Chains and chain wheels 100 / I22 Vacuum technology 112 / I23 Pumps 115 197 I24 Industrial fans 117 356 I25 Compressors 118 232 I26 Plain bearings 123 / I27 Earth moving and construction 127; 195 151 equipment I28 Fluid power 131 / I29 Gas cleaning / 195 I30 Air distribution / 156 I31 Valves 153; 185 69; 236; 105 I32 Flanges / 74 I33 Information processing in 184 310 automation I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152 I36 Thermoprocessing technology / 186 I37 Printing and paper machines / 198 I38 Leather production, tannery and / 200; 201 related machinery I39 Machines for metal processing / 202; 322 I40 Industrial piping networks / 267 I41 Membrane filters / 272 I42 Potentially explosive atmospheres / 305 I43 Hydrogen energy 197 / I44 Nanotechnologies 229 352 I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials Subsector Title ISO/TC CEN/TC reference reference M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110 M02 Zinc / 209 M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron M04 Copper 26 133 M05 Welding 44 121 M06 Dimensions of wrought products / / M07 Manganese and chromium 65 / M08 Light alloys 79 132 M09 Iron ores 102 / M10 Metallic coatings 107 240 M11 Powder metallurgy 119 / M12 Aluminium ores 129 / M13 Ferroalloys 132 / M14 Nickel 155 / M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101 M17 Heavy metal ores 183 / M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407 M20 Tin and tin alloys / 220 M21 Precious metals / 283 M22 Lead and lead alloys / 306 M99 Undetermined / /

Sector N: Non-metallic materials Subsector Title ISO/TC CEN/TC reference reference N01 Paper and board 6 172 N02 Solid fuels 27 335; 343;383; CEN/WS 019 N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061 N04 Refractories 33 187 N05 Textiles 38 189; 248 N06 Rubber 45 218; 366 CEN/WS 003 N07 Sawn timber 55 38; 175 N08 Mica / / N09 Plastics 61 249 N10 Cork 87 / N11 Wood-based panels 89 112 N12 Timber products 99 / N13 Leather 120 289 N14 Plastics pipes 138 155 N17 Fluorspar 175 / N18 Glass-fibre reinforced plastics / / N19 Tapes / 253 N20 Ceramics 206 184 N21 Gaseous fuels and combustible gas 158; 193 238; 408 N22 Feather and related materials / 222 N23 Diamond / 410 N99 Undetermined / /

Sector S: Health, environment and medical equipment Subsector Title ISO/TC CEN/TC reference reference S01 Acoustics and sound 43 126; 211 insulation S02 Transfusion equipment 76 / S03 Syringes 84 / S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043 S05 Dentistry 106 55 S06 Vibration & shock 108 231 S07 Anaesthetic and respiratory 121 215 equipment S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034 S10 Surgical implants 150 285; CEN/CLC/JWG AIMD S11 Contraceptives 157 / S12 Gas analysis / / S13 Ergonomics 159 122 S14 Prosthetics 168 / S15 Surgical instruments 170 / S16 Aids for the disabled 173 293 S17 Respiratory protective devices / 79 S18 Sterilization of equipment 198 102; 204 S19 First aid equipment and rescue systems / 239 S20 Waste collection, handling and / 183 transportation S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055 S22 Energy saving / CEN/WS 005 CEN/WS 015 S23 Personal & property protection against aggression/burglary protection / 263 S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics S26 Environmental management 207 CEN/TC 406; CEN/WS 040 S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120 S28 Demining / CEN/WS 029 CEN/WS 013 S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging Subsector Title ISO/TC CEN/TC reference reference T01 Shipbuilding and maritime 8; 188 15; 300 structures T02 Aerospace 20 274; AECMA; ECSS ;377 T03 Road vehicles 22 301; 326 CEN/WS IMA T04 Tyres 31 / T05 Pallets 51 / T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393 T07 Glass containers 63 / T08 Cranes 96 147 T09 Materials handling and 101 148; 149 storage equipment T10 Freight containers 104 119; 280 T11 Steel wire ropes 105 / T12 Industrial trucks 110 150; 324 T13 Lifting chains, hooks and ropes 111 168 T14 Packaging 122 261; 120 T15 Cycles 149 333 T16 Lifts & escalators 178 10; 242 T17 Builders hoists / / T18 Elevating platforms / 98 T19 Road safety / 226; 339 T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR T21 Packaging machines / 146 T22 Off-road vehicles / 354 T99 Undetermined / CEN/WS TAF

Sector Z: Information technology Subsector Title ISO/TC CEN/TC Z01 Radiocommunication for IT / / Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI Z03 Common O.S.I. activities / CEN/CLC - EWOS Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS ego; CEN/WS ein; CEN/WS epr

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC April 2018 Issued on : 16 May 2018

Page 1 Information Procedure on Standards Notifications registered at CCMC during April 2018 Sector U : GENERAL ELECTROTECHNICAL STANDARDS Register issued on : 16 May 2018

Subsector U99: UNDETERMINED Page 2 Subsector : U99 Registration Date : 2018-04-18 DIN Germany ID : 06235166/0001 06235166 Radioisotope laboratories - Part 4: Rules for the protection of persons Subsector : U99 Registration Date : 2018-04-18 DIN Germany ID : 06235166/0001 06235166 Radioisotope laboratories - Part 4: Rules for the protection of persons ** End of Sector **

Page 3 Information Procedure on Standards Notifications registered at CCMC during April 2018 Sector V : ELECTRONIC ENGINEERING Register issued on : 16 May 2018

Subsector V07: NUCLEAR INSTRUMENTATION Page 4 Subsector : V07 Registration Date : 2018-04-18 DIN Germany ID : 02228029/0001 13.280 DIN VDE 0493-1000/A1 Radiation protection instrumentation - Determination of uncertainty in measurement; Amendment 1; Text in German and English ** End of Sector **

Page 5 Information Procedure on Standards Notifications registered at CCMC during April 2018 Sector W : ELECTRICAL ENGINEERING Register issued on : 16 May 2018