SCCG0 & SCCP0 Service Parts This is the illustrated parts list for the SCCG0M and the SCCP0M esidential Ice Machines hen ordering a service part, always refer to the complete model number of the equipment being repaired to be sure of obtaining the correct part. Many times there are slight differences between models, and having the complete model number will aide in selecting the correct part. The condenser fan motor, fan blade, fan motor brackets and condenser shroud changed in August 00. The model number also changed to an A series: SCCG0MA-. and SCCP0MA- Painted models were discontinued in 0. Cabinet changed November 0 to add service panel. Table of Contents Door............................................... Page Cabinet............................................. Page eservoir and Spray Pump................................... Page efrigeration.......................................... Page Under Bin Parts......................................... Page Control System......................................... Page Schematic Diagram....................................... Page iring Diagram......................................... Page November 0 Page
SCCG0 & SCCP0 Service Parts Door 0 0 Items and included with item, package shipped loose in bin. Door panel kits. Kits include items thru. KDF hite panel, white handle KDFS hite panel, SS handle KDFB Black panel, black handle kdfbs Black panel, SS handle KDFS SS panel, SS handle 0--0 Corner block, H 0-0- Handle, white 0-0- Handle, black 0-0-0 Handle, SS 0--0 Corner block, LH 0--0 Screw 0--0 Screw 0-0-0 Lockwasher A0-00 Support bracket -0-0 Door gasket 0 0-0-0 Screw 0--0 Screw - hinge to cabinet 0--0 Hinge - top left/bottom right 0-0- Screw - hinge to door 0--0 Hinge 0-0- Screw A-00 Door assembly, does not include door panel or hinges 0--0 Hole plug 0--0 Hinge package 0--0 Leg cap, pack of 0-00-0 Magnet, door switch October 0 Page
SCCG0 & SCCP0 Service Parts Cabinet 0, 0 a 0-0-0 Screw A-00 Back panel A-00 Utility routing bracket -- Snap bushing A-00 Srv panel mntg bracket 0-0-0 Kickplate a A-00 Kickplate, SS for outdoor model 0-0- Screw 0--0 Panel handle A-00 Service panel, SS 0 0--0 Bin edging 0--0 Screw A-00 Top hinge brkt, H SS A-00 Top hinge brkt, L&SS* a 0--0 Screw to fill holes -0-0 Gasket -0-0 Gasket strip 0--0 Insulation pad A-00 Top panel, SS 0-0- Screw A-00 SS cabinet & bin A-00 Btm hinge brkt, L&SS** 0 A-00 Bin stat bracket/scoop hldr 0--0 Scoop A-00 Service panel * changed / to add left and right hinge mounting. Painted parts no longer available. May 0 Page
SCCG0 & SCCP0 Service Parts a eservoir and Spray Pump 0, otate item 0 degrees & lift to remove. eservoir Changed / 0 -- ater pump, incl item a a 0--00 Fan blade 0--0 Pump discharge hose A00-0 ater probe 0--0 Spray platform 0--0 ater Tee -0- O-ring 0--0 Front bracket 0--0 Thumb screw A-00 Curtain 0 0--0 Clamp 0--0 Drain cap, not used after / 0--0 Drain tube 0--0 Evap bracket, left 0--0 Evap bracket, right 0--0 Grommet 0--0 Clip -0-0 O-ring 0--0 Barbed fitting 0--0 Spout 0 0--0 O-ring 0-0- Spray nozzle, kit. Set of nozzles, o-rings, screws and nuts. Item is a plastic cover that fits over the evaporator tubing and cups. It was added in 0. 0--0 Evaporator cover -00-0 Drain plug, changed /. 0--0 eservoir November 0 Page
SCCG0 & SCCP0 Service Parts efrigeration 0 A-00 Suction line accumulator assy -0-0 Thermistor 0--0 Evaporator -- Compressor Compressor includes overload, relay and drier a -- Overload b -- elay 0--0 Clip 0-0-0 asher -00- Grommet -0-0 Condenser 0--0 Drier 0-0- Hot gas valve 0a -0- HGV coil June 00 Page
SCCG0 & SCCP0 Service Parts Under Bin Parts GAVITY DAIN MODELS ONLY 0 0 0 DAIN MODELS ONLY -0-0 Inlet water sol valve 0--0 Screw --0 Fan motor -0-0 Fan motor, A series --0 Fan blade 0--0 Fan blade, A series A-00 Fan motor bracket A-00 bracket attaches to shroud. Use on prior models requires brackets & A-00. A-00 Fan motor bracket A series A-00 Fan shroud A0-00 Fan shroud, A series -00-0 Gasket, order & cut to fit 0-0-0 Air baffle -0- Thermostat 0 A-00 Thermostat bracket 0-0- Screw 0-0-0 Leg leveler a 0--0 Leg cap 0-- Hole plug 0-- Hose clamp 0--0 Drain hose 0--0 Hose clamp -0-0 Elbow A-0 Pump kit A-00 Discharge hose 0 0-0-0 Hose clamp 0--0 Elbow 0--0 Check valve 0-- Hose clamp 0--0 Drain tube 0-0-0 Barbed connector 0-0-0 Switch hose A0-00 Switch bracket -00-0 Pressure switch 0-0-0 Spring 0-0- Pump & motor only March 0 Page
SCCG0 & SCCP0 Service Parts Control System 0--0 Screw --0 Transformer -0-0 Bulb 0-0-0 Light cover -0-0 Switch panel -0-0 Bin light switch, bulb socket and harness -0- Controller 0--0 Screw 0--0 Cover Not Shown: NS -00-0 Bin stat harness NS -000-0 Hi voltage harness, lower NS -000-0 Hi voltage harness, upper Note: If replacing the lower harness, always replace the upper one too. NS --0 ater sensor harness July 0 Page
SCCG0 & SCCP0 Service Parts Schematic Diagram IF DAIN IS INSTALLED L N SAFETY PESSUE SITCH DAIN PESSUE SITCH DAIN TANSFOME LINE FAN MOTO LIGHT SITCH V LIGHT ATE SOLENOID ATE HOT GAS SOLENOID COMPESSO ELECTONIC CONTOL ATE CONDUCTIVITY SENSO LEVEL CONTOL SUCTION TEMPEATUE THEMISTO SITCHES ON THIS UNIT SHON IN FEEZE CYCLE ITH DAIN IN OPEATION AND DOO CLOSED June 00 Page
J SCCG0 & SCCP0 Service Parts iring Diagram IF DAIN IS INSTALLED COMM NC NO SAFETY PESSUE SITCH POE IN GN/Y MOTO BU COMM NC NO PESSUE SITCH FAN MOTO LOAD LINE TANSFOME V O LIGHT SITCH BN ATE CONDUCTIVITY SENSO LIGHT J OFF LEVEL ON Y Y DAIN MOTO CONTOL SUCTION TEMP. SENSO J J ELECTONIC CONTOL GN/Y J J GN/Y ATE SOLENOID / GN/Y HOT GAS SOLENOID EATH GOUND ELAY - CUENT S M OVELOAD COMPESSO / June 00 Page