Integrated Industrial Solutions

Similar documents
WAL-RICH CORPORATION SINCE 1950

Hakki Pilke Raven spare parts manual


REPLACEMENT PARTS MANUAL FOR MODEL: PWS 45-75, AED-2 & APK-4 SERIES

DLKF. EBARA Submersible Sewage Pumps Specifications Project: Model: Chk d: Date:

CMA Dishmachines Knott Avenue Garden Grove, CA Undercounter High Temperature Dishwasher. Service Replacement Parts.

MODEL CMA-180UC PARTS MANUAL Rev 1.18

REF. NO Clamp Assembly 8 1 set Gasket (4 per set) S.S. Lock-washer 3/8 x 1/ Brass Impeller 3.

Hydrotherapy Jets (Remote Water Quality System)

MODEL CMA-180UC PARTS MANUAL Rev 1.16

Group-1 Agitators. Group-2 Air Conditioning Plant. Group-3 Air Handling Plant / Air Pressurisation System. Group-4 Belts (Conveyor, V & Wedge Belts)

Thermo Scientific Air Cadet

monty 4200 Truck Tire Changer Spare Parts list

A. Operation and Maintenance Data: For pumps to include in emergency, operation, and maintenance manuals.

CATALOG OF REPLACEMENT PARTS HSROG SERIES SINGLE RACK OVEN. A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO

FAN ENGINEERING. Sealing of Fan Housings

Settlement Agreement. Schedule 1: Covered Products

D. NEMA Compliance: Provide electric motors and components which comply with NEMA standards.

GALATEA DOMUS. Dal 1901 COD

A. Section Common Motor Requirements for HVAC Equipment: Fan motors.

UNIVERSITY OF ROCHESTER DESIGN STANDARDS NOVEMBER 1, 2013

ILLUSTRATIONS ARE FOR REFERENCE ONLY AND ARE SUBJECT TO CHANGE WITHOUT NOTICE ITEM P/N DESCRIPTION

A DIVISION OF HOSE & TUBING CATALOG 2017

SAN JUAN FRESH WATER COOLING SYSTEMS

PRICE BID. UNIT QTY Rate in Figure Rate in words Amount DESCRIPTION OF ITEM D: FIRE PROTECTION SYSTEM

SECTION STEAM CONDENSATE PUMPS

AUTOMATIC WASHER MODELS: 7MMVWC100DW1 (White) 02/26/ Maytag Part No. W Rev. B

B. HI Compliance: Design, manufacture, and install pumps in accordance with HI "Hydraulic Institute Standards."

VSA SEWAGE PUMP. Capacities to 1600 gpm, Heads to 120, Horsepower range 3/4 thru 40, 3 thru 6 discharge, 1750 and 1150 operation.

Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION AIR HANDLING UNITS

Essex County College - West Essex Campus Addition And Renovations dib # / SECTION HYDRONIC PIPING SPECIALTIES PART 1- GENERAL

C. B. Trading Corporation

MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02A

RA 701 B Batterie assembling. As at: 01/15/10 Time:21:19

PARTS CATALOGUE 2011

COGEIM COGEIM EQUIPMENT MAINTENANCE AND REFURBISHMENT A NECESSARY CHOISE Number 1 filter-dryer supplier in the world

Cold water HD 9/18-4 ST

COBRA -H EXTRACTOR 120V

MODEL CMA-130VL PARTS MANUAL Rev 1.00

A. ASME Compliance: Fabricate and install hydronic piping in accordance with ASME B31.9 "Building Services Piping.

Global-Tek (Singapore) Pte Ltd

SECTION HEATING AND AIR CONDITIONING PIPING SYSTEMS. A. Provisions of Division 01 apply to this section. 1. Chilled Water System.

4-1 1 / 2 " Tees / 2 " hole saw w/ 1/4" drill bit / 2 " Male slip plugs

Manifold Cleaning and System Refurbishment...N3 Nozzle Heater and Hot Runner Component Repair...N4

Model 10AB/APRB Automatic Dishwasher

MITICA. Dal 1901 COD

215 Gallon Waste Oil Tank With Bypass Regulator Installation Instructions

HVAC BASIC MATERIAL AND METHODS 1.01 RELATED CORNELL DESIGN AND CONSTRUCTION STANDARDS

INSTALLATION INSTRUCTIONS

DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION PUMPS

SECTION HYDRONIC PIPING

Home Stacked Washer/Dryer

EX20. Parts List Models: (100C) (cold), (100H) (heated), (100SC) (single cord, heated) Form No /2015 REV A

HD 7/11-4 Cage Classic

ORIGINAL SPARE PARTS CHD-6330

PITNEY BOWES. Parts Manual. Copyright, Pitney Bowes Inc All rights reserved. FIT-Dryerpartsvrev0 1

Granule Gastro/Combi

SECTION GENERAL-SERVICE COMPRESSED-AIR SYSTEMS

TOP AND CABINET PARTS

WASHER/DRYER CONTROL PANEL PARTS

Industrial Processing Solutions

Electric Automatic Carpet Extractor. Operator and Parts Manual. Model No.: Rev. 00 (11-99)

Appendix B. Symbols for Drawings. Table B.1. Air moving devices and ductwork symbols. Air Movement. Fans. Axial flow fan.

Parts and Service Manual

Essex County College - West Essex Campus Addition And Renovations dlb # / 11-14

ULTRA DYNAMIC HOSE PRODUCTS HOSE & TUBING CATALOG 2018 A DIVISION OF UBBER MPANY, INC. RUBBER COMPANY, INC RUBBER COMPANY, INC.

IMAGE V. Parts and Service Manual

TOP AND CABINET PARTS For Model: 7MWTW1603AW0 (White)

MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02B

BD 14/4 AUTOMATIC SCRUBBER MODEL NO: 99414

MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING

Spare parts list ( ) Spare parts list PUZZI 100

DNJ SERIES PUMPS END SUCTION CLOSE COUPLED

HP310-C EXTRACTOR 120V

SECTION DUCTWORK. A. Section Painting: Weld priming, weather resistant, paint or coating.

AUTOMATIC WASHER MODELS: 7MWTW1805DM0 (White) 01/31/ Whirlpool Corporation Part No. W Rev. A

Roto-Jet I & II Tube Cleaning Systems

FILTRATION SYSTEM MODEL: FILTER - 5 MULTI-SHIFTER, INC. P.O. BOX CHARLOTTE, N.C TEL#: FAX#:

Spare parts list ( ) Spare parts list Priza

Nanoprotech Italia

SCC 101 G Valid as of G11SE0404 up to G11SE... SCC 101 G

Technical Documentation G.Mondini S.p.A. Tray Sealer TRAVE-384

vending machine [CINO EC PRO] spare parts manual Latest Update 10/01/2014 Manual PDF Generated on :47

INSTALLATION INSTRUCTIONS

WATER SUPPLY HOOK-UP DISPLAY 0-WSH-1

B COD REV.02

CATALOG OF REPLACEMENT PARTS

REPLACEMENT PARTS MANUAL

Remote Water Quality System Standard Equipment (supplied by EPI) Remote Water Quality System Optional Equipment (supplied by EPI)

Engine: 10LD Drawing: A

WASHER/DRYER CONTROL PANEL PARTS For Models: LTE6234DQ2, LTE6234DZ2, LTE6234DT2 (Designer White) (Designer Almond) (Biscuit)

Heat Exchanger Block Replacement Instructions

BEXT Pro EXTRACTOR. Parts List Models: (400H), , (100H), (100) Form No /11 revised 4/13

WASHER & DRYER REPAIR

Lasco # Description Picture Lasco # Description Picture

Spare parts list ( ) Spare parts list PUZZI 100 *USA


SERVICE MANUAL WASHING. Washer-dryers HEC-RIM HEC-ARCHED. Structural characteristics, electrical components, accessibility

MAGNETIC DRIVE PUMPS AMERICA S MOST VERSATILE LINE OF CENTRIFUGAL PUMPS THINK QUALITY...THINK DELIVERY...THINK PRICE

Homestyle Stacked Washer/ Dryer

Transcription:

Integrated Industrial Solutions melschire Automation Technologies LLC Umm Al Quwain UAE, Post Box: 4874. Tel: (00971 6 ) 7681017, Mob: 00971 55 4361078, Fax : (00971 6) 7681027. www.melschire.com. Email: info@melschire.com.

Instrumentation Tubes Hydraulic Tubing Gas line Tubing Petro Chemical Tubing Inch & Metric Size Coil & straight Length Sch-10, Sch-20, Sch-40 Available in SS-316, SS-304, Carbon Steel (Seamless Pipe, ERW Pipe), Copper, Brass. Compression Fittings Double Ferrule Fitting Single Ferrule Fitting Compression Adaptor Elbow, Tee, Straight Inch & Metric size NPT,BSP,JIC, Flair Available in SS-316, SS-304, Carbon Steel, MS, Copper, Brass, PE, Teflon. Fitting & Adaptor High Pressure Fittings Hydraulic Fittings Pipe Fittings Test Point Fittings Banjo Fittings Available in MS, CS, SS316, SS304, GI, Brass, Copper, Teflon Material Pneumatic Fittings & Tubes FRL Solenoid Valve Cylinder & Fittings QRC (Ludecke & Milton) One Touch & Push Fitting (Plastic, Metal, Brass) PU Tube PU Spring Coil Nylon Tube Silicon Tube Teflon Tube Inch & Metric Size Vacuum Vacuum Cup in Flat, Bellow, Normal (NBR, SBR, Silicon) Vacuum Generator Vacuum Ejector Vacuum Gage (Dry & Liquid Filled) Fax : (00971 6) 7681027. www.melschire.com. Email : info@melschire.com

Hose Hydraulic Hose Steam Hose Chemical Hose Food Hose Sandblast Hose SS Corrugated Hose SS Metallic Hose GI Metallic Hose PVC Green Hose Olive Green Hose Radiator Hose Air Hose Water (suction & discharge) Oil (suction & discharge) Cement Hose Bulk Material Hose SS Braided Teflon Hose Reinforced PU Hose Transparent PU Hose Lay Flat Hose (Mid & HD) Synthetic Fire Hose Duct Hose (PU,Gry,EPDM) Crimping & Assembling Facility (custom made) Jubilee Type Worm Type SBSC Type Stuff Type Single Stuff Type Double Clamps Double Bolt Four Bolt Up to 30mtr Strip Hanging Type Nail Type Available in MS, SS, GI Material Bellows Rubber Expansion Bellows Union Type & Flange Type SS Bellows SS Corrugated Bellows Available in Customer Requirement Couplings & Elements Miller Coupling Shortz Coupling Chicago Coupling Victaulic Coupling Cam Lock Coupling HRC, Lovejoy Fenner, Rotex Grid Coupling Aluminum Coupling Tire Coupling All Coupling Elements & Gasket Available

Hydraulic U Seal Guide Ring Road seal Hydraulic Seals Piston Seal V Pack Wiper Seal Available in PU, NBR, SBR, Teflon, Gray Teflon, Silicon, Viton, UHME, Fiber Material O Ring O Ring Cord O Rings Flat Ring X Ring Available in PU, NBR, SBR, Teflon, Silicon, Viton, Material Single Lip Oil Seal Double Lip Oil Seal Oil Seal Closed Type Wiper Type Available in NBR, Silicon, Viton, Metal Type, Teflon Type Water Pump Seal High Speed Pump Seal Chemical Pump Seal Mechanical Seal Rotary Union Seal Grundfose Pump Seal Ebara Pump Seal Available in Ceramic, Carbon, Silicon Carbide, Teflon, SS Silicon Carbide, (we are specialized in custom made) Belt V Belt X Belt SPA, B, C, D Belt Timing Belt HTD Endless Timing Belt H, M, L End Timing Belt T, AT, M, L Food Conveyor Belt Printing Conveyor Packaging Conveyor General Conveyor Specially Fabricated- Conveyor & Timing Belt Available in PU, Canvas, Teflon, Silicon, SS, Rubber Materials in Difference Size and Pitch

Valve Ball Valve Gate Valve Globe Valve Butterfly Valve Knife Valve Needle Valve Manifold Valve Mini Valve Available in MS, SS, Brass, Bronze, Teflon, PE Material (also in Motorized, Pneumatic Actuator custom made) Hex Bolt Allen Bolt Machines Screw Nut, Bolt Wings Nut Bolt Lock Nut, Anchore Bolt Tie Bolt Available in MS,SS, CS, Cadmium, Brass, Teflon Material Plate Washer Spring Washer Star Washer Copper Washer Washer, Circlip Internal Circlip External Circlip Snap Rings Aluminum Washer Available in MS, SS, GI, Teflon, Rubber, Silicon Material Ball Bearing Needle Bearing Trust Bearing Pillow Bearing Bearings Tapper Bearing Linier Guide Bearing Ball Screw Bearing Eye End Bearing Available in all Major Brands Gasket, Rubber Mounting Non-Asbestos Gasket Graphite Gasket Metallic Gasket Single Bolt Mounting Double Bolt Mounting As per Sample Mounting Available in Sheet & Any Type of Customer Requirement Melschire Autom mation Technologies LLC Umm Al Quwain UAE, Post Box : 4874. Tel : (00971 6 ) 7681017

Industrial Automation Project Work & Maintenance Water Treatment Plant Food Processing Plant Petro Chemical Plant Printing Industries Packaging Industries Plastic Industries Wood Industries Hotels and Airport Service Area Custom Related Modification & Fabrication Technical Service Mother Board based Service Integrated Chip (ubga) based PCB Repair Electronic based Modification PLC, HMI based Plant Up gradation Manual, Semi-Auto Machine Up gradation Supervisory data Access Control based Plant Monitoring PC based Plant Supervising with Accounting Inventory

Mechanical Solution for Industry Fabrication for Mechanical Parts Modification for Mechanical Parts Fabrication of Gear in Teflon, UHME, Fiber, Brass, MS, SS Fabrication of Conveyor Systems for any type Industry Fabrication of High Pressure Fittings in MS, SS All Type of Mechanical, Engineering, Fabrication, Instrumentation Work Will Be Done Custom made Parts in UHME, Teflon & Silicon Fax : (00971 6) 7681027. www.melschire.com. Email : info@melschire.com

Chemical Degreasing, Cleaning, Dismantling Rust-removing Cleaner (very quick action) Universal Lubricant-Degrilube (non-inflammable) Non-Inflammable Safety, Handy Seize Product Orange Releasing Agent WR+: 5 Product Over 1000 Uses Super Industrial Degreaser Orange Solvent Degreaser for Tar, Grease, Oil, Adhesive and Paints Highly Concentrated Detergent Cleaner Food Industry Cleaner Shampoo for Car Body Specially designed for cleaning all type of Rims Liquid Drain Renovator for Pipe unblocking Scale Remover (powerful cleaner for Tiles & Joints) Re-Assembling & Lubricating Molyspray (Dry lubrication for Small Mechanism) Tefliss 2 (PTFE based Clean and Dry Lubricant) Pate Spray (Lubrication of Tools, Assemblies and Mechanical Parts) HT 600 (Handy Corrosion Lubricants for parts subjected to bad weather) TM 900s (High Temperature Copper based Lubrication) CT 10 (Multy Purpose Lithium based Grease) CT 12G (Graphite based Lithium Grease for Low Friction) CT FLON (Lithium and Teflon based Multipurpose grease) WSA (Marine Grease) CT 609 (Grease for Food Industry) SI 4 (Silicon Grease) CB 6 (Clean Lubricant for Chains, Conveyor and Mechanism) LUBRIFIANT HP (High Temperature and Chemical Environment Grease) Silicon Spray (mould release agent for Rubbers and Plastics)

Chemical Treaded Lock, Sealing, Bonding 298 (Treaded Lock for Food Industry) 303 (Medium Strength locking for Threaded Parts) 300 (Permanent Locking for Threaded Parts) 507 NDI (Dry Solvent for Surfaces Preparation) 318 (Locking for Retaining Parts eg. Bearing, Sleeve) 316 (Locking for Bushes, Bearing, Sleeves, Pulley) 310 (Very High Dynamic Strength Locking) 133 (Plastic Threaded Sealing Hot and Cold water) 340 (Sealing Paste with PTFE Resistance to Vibration) 329 (Medium strength Liquid Gasket) 367 (Seals Threaded Pipe and Connection) 331 (Teflon based Gasket for Hydraulic Connection) 342 (Flexible Sealant for Treaded Parts face Joints) 104 (Black Silicon Gasket for all Sealing Sumps, Doors) 103 (High Temperature Flexible Sealing and Bonding) Protection and Detection Medium Term Anti Corrosion Protection Long Lasting Protection for Storage Parts Cold Galvanizing Powerful Rest Stop Converter Increases Drive Belt Adhesion Welding Anti-Adhesion (spatter for nozzle, gages) Special Protect based on Ceramic for Nozzle Protection Leak Detector for Gas or Compressed Air Dry Solvent for Crack Detection Penetrating for Crack Detection Chlorine free Micro Emulsion for Machining Purpose Heavy Duty Cutting Oil Cleaning Solvent for Electronic Parts Insulating Varnish for High Voltage Cleaner for Window Surfaces (monitor, over head projector, copier) Citrus Fruits Hand Care Degreaser Water free Cleaner for Hand Hygiene