Thermo Scientific Hamilton Laboratory Furniture & Fume Hoods Quick Ship and Express Ship Program. Product Specification Catalog

Thermo Scientific Hamilton Laboratory Furniture & Fume Hoods Quick Ship and Express Ship Program Product Specification Catalog

Steel Cabinet Basic Information Cabinet Dimensions 35-1/4 (89.5 cm) 29-3/8 (74.6 cm) 21-5/8 (54.9 cm) Standing Height 21-5/8 (54.9 cm) Sitting Height Door/Drawer Configurations Right Hinged Left Hinged Right Cupboard Left Cupboard Quick Ship Steel Colors Cabinet shell: Any color listed below Doors and drawer fronts: Any color listed below Pulls: Chameleon Choice of eighteen standard colors, finished with a special powder coating process with excellent chemical and abrasion resistant characteristics. Use the two letter code to specify color choice. PW Petal White DK Dark Khaki SW Shell White PM Piedmont Green CH Chameleon HG Hunter Green PL Platinum BS Blue Slate SA Sand BL Blue SS Sandstone IN Indigo G1 Dove Gray PA Purple G3 Gray Slate BD Brown Burgundy KK Khaki BK Black Colors are representative only. They approximate as closely as possible the true tones within the limitations of color printing. Actual samples are recommended prior to making a final selection. 2 www.fishersci.com

Table of Contents Quick Ship Table of Contents Express Ship Program Steel Laboratory Furniture...4-24 Steel Casework Construction...4 Laboratory Workstation Assemblies...5 8 Fume Hood Assemblies...9 10 Base Cabinets Inset Steel...11 15 Base Cabinets, Sitting Height...11 Base Cabinets, Standing Height...12 14 Sink Cabinet...13 Corner, Stainless Steel, Base Cabinet...13 Vent, Cabinet...14 Base Molding...14 Pipe Support Frame...14 Fillers, Base Cabinets...15 Scribes, Base Cabinets...15 Steel Wall Cases...16 Fillers, Scribes for Steel Wall Cases...16 Steel Tall Storage Cases...17 Scribes, Tall Cases...17 Steel Laboratory Tables, Frames and Components...18 21 Adjustable-height Tables...18 Balance Table...18 Stabilizing Slab...18 Work Surfaces...18, 30 31, 46 47 Laboratory Table Rails and Frames...19 Table Legs and Components...20 Kneespace Panel...21 Panel End Support...21 Utility Table Shelf...21 Mobile Instrument Carts...22 23 Mobile Cart, Low Profile...23 Suspended Cabinets...23 Solvent Storage Cabinets...24 Wood Base Cabinets and Components...25 29 Wood Laboratory Tables...30 Work Surfaces...31 32 Reagent Shelving and Regency Racks...33 Laboratory Sinks and Service Fixtures...34 36 Electrical Fixtures...36 Safety Equipment...37 Pegboards...37 Fume Hoods...38 45 Fume Hood Technical Rough-in Information...42, 45 Fume Hood Work Surfaces...46 47 Fume Hood Service Fixtures...48 Epoxy Resin Oval Cupsink...48 Fume Hood Blowers...49 Fume Hood Accessories...50 Quick Ship and Express Ship Program Fume Hoods SafeAire II...51 Work Surface...52 Airflow Monitor/Alarm...52 Remote Control Fixture...52 Cupsink...52 Base Cabinets Drawer Cabinets...53 Combination Cabinets...53, 54 Sink Cabinets...53 Acid Storage...55 Solvent Storage...55 Tables, Adjustable Height...55 Table Frames Frames...56 Kneespace Rails...56 End Leg Assemblies...56 Fillers and Panels...57 Wall Cases Wall Case, Framed Glass with Double Doors...58 Wall Case Fillers...58 Wall Scribe...58 Tall Case Tall Case, Framed Glass with Double Doors...58 Work Surfaces Work Surfaces without Cutout...59 Work Surfaces with Cutout...59 Work Surface Curb...59 Accessories Pegboard...60 Pegboard Drip Trough...60 Mixing Faucet...60 Sink, Epoxy Resin...60 Sink Support Assembly...60 Sink Outlet...60 Sink Overflow...60 Index, Alphabetical...61 Index, Fume Hoods, Specialty...64 Index, Numerical...62-64 3

Thermo Scientific Hamilton Steel Laboratory Furniture Steel Casework Construction 16 gauge front rail with reinforced angle. 18 gauge center back upright 14 gauge corner reinforcement angle at four front corners. Corners welded and ground smooth. 18 gauge front horizontal rail. 18 gauge post Rubber bumper 20 gauge drawer front, sound deadened. 20 gauge one-piece drawer body, coved bottom. 14 gauge drawer suspension with nylon-tired ball-bearing rollers. 18 gauge upright with holes for shelf support. Wrap-around back/end panel. 20 gauge adjustable shelf, zinc-plated supports. Nylon roller catch Stainless Steel strike plate 20 gauge interior and 18 gauge exterior door panels with sound deadening material and 20 gauge reinforcing channel one each door. Access for leveling adjustment. Stainless steel 5-knuckle institutional hinge with 14 gauge reinforcement inside cabinet upright. 18 gauge bottom, end panel, back and upright. 3/8-16 x 1-3/4 leveling screw with hex head for easy adjustment. 11 gauge gusset at all four bottom corners. 18 gauge base and cabinet bottom. 4 www.fishersci.com

Thermo Scientific Hamilton Steel Laboratory Furniture Workstation Assemblies Order any of our assemblies with a single catalog number. Pre-designed workstations conveniently turn an unused corner or empty room into a useful, efficient laboratory. Based on our most frequently ordered components, these assemblies are available in configurations to handle a wide variety of routine laboratory procedures. Lengths from 3' to 17'6 meet the needs of large, medium and small installation requirements. Each assembly includes all necessary components including epoxy cement to join work surfaces for a seamless appearance. All units are shipped disassembled and must be assembled at the installation site. Assemblies are not pre-wired or pre-piped. Sitting Height Wall Assembly n Three-cabinet sitting height wall assembly with two kneespace areas n 1 (2.54 cm) thick black Epoxy Resin work surface with backsplash Height with Length Work Surface HMLAB001 8'-6 (259.1 cm) 30 (76.2 cm) 30-3/8 (77.2 cm) HMLAB002 10'-0 (304.8 cm) 30 (76.2 cm) 30-3/8 (77.2 cm) HMLAB003 10'-6 (322.6 cm) 30 (76.2 cm) 30-3/8 (77.2 cm) Standing/Sitting Height Wall Assembly n Four-cabinet combination standing/sitting height wall assembly with two kneespace areas and black epoxy resin sink and sink hangers n 1 (2.54 cm) thick black Epoxy Resin work surface with backsplash n Deck-mount mixing faucet and plastic P-trap Height with Length Work Surface HMLAB004 14'-0 (426.7 cm) 30 (76.2 cm) 30-3/8 (77.2 cm) 36-1/4 (92.1 cm) HMLAB005 15'-0 (457.2 cm) 30 (76.2 cm) 30-3/8 (77.2 cm) 36-1/4 (92.1 cm) HMLAB006 16'-0 (487.9 cm) 30 (76.2 cm) 30-3/8 (77.2 cm) 36-1/4 (92.1 cm) Standing Height Wall Assembly with Wall Cabinets n Three-cabinet standing height wall assembly with two wall cabinets and black epoxy resin sink and sink hangers n 1 (2.54 cm) thick black Epoxy Resin work surface with backsplash n Deck-mount mixing faucet and plastic P-trap Height with Length Work Surface HMLAB007 9'-0 (274.3 cm) 30 (76.2 cm) 36-1/4 (92.1 cm) HMLAB008 10'-0 (304.8 cm) 30 (76.2 cm) 36-1/4 (92.1 cm) HMLAB009 11'-0 (335.3 cm) 30 (76.2 cm) 36-1/4 (92.1 cm) HMLAB010 12'-0 (365.8 cm) 30 (76.2 cm) 36-1/4 (92.1 cm) Quick Ship and Express Ship Program 5

Thermo Scientific Hamilton Steel Laboratory Furniture Workstation Assemblies Standing Height Wall Assembly with Fume Hood n Four-cabinet standing height wall assembly with black epoxy resin sink and sink hangers and a constant volume/bypass fume hood n Laboratory fume hood superstructure is wide. Equipped with four remote control service fixtures for cold water, gas/air/vacuum and cupsink. (Fixtures not mounted) n Deck-mount mixing faucet, plastic P-trap and epoxy resin sink n Blower and ductwork not included see page 49 n 1 (2.54 cm) thick black Epoxy Resin work surface with backsplash Height with Length Work Surface HMLAB011 13'-0 (396.2 cm) 30 (76.2 cm) 36-1/4 (92.1 cm) HMLAB012 14'-0 (426.7 cm) 30 (76.2 cm) 36-1/4 (92.1 cm) HMLAB013 15'-0 (457.2 cm) 30 (76.2 cm) 36-1/4 (92.1 cm) HMLAB014 16'-0 (487.9 cm) 30 (76.2 cm) 36-1/4 (92.1 cm) Height to top of fume hood is 90-3/4 (230.5 cm) Standing Height Wall Assembly with Sink n Four-cabinet standing height wall assembly with black epoxy resin sink and sink hangers n 1 (2.54 cm) thick black Epoxy Resin work surface with backsplash n Deck-mount mixing faucet, plastic P-trap and epoxy resin sink Height with Length Work Surface HMLAB015 12'-0 (365.8 cm) 30 (76.2 cm) 36-1/4 (92.1 cm) HMLAB016 14'-0 (426.7 cm) 30 (76.2 cm) 36-1/4 (92.1 cm) Island Assembly with End Sink n Seven-cabinet standing height island assembly with end sink n 1 (2.54 cm) thick black Epoxy Resin work surface n Black Epoxy Resin sink, includes sink hanger n Deck-mount mixing faucet, plastic P-trap, four deck-mount double gas/air/ vacuum cocks and two deck-mount double-faced duplex electrical outlet boxes Height with Length Work Surface HMLAB017 11'-6 (350.5 cm) 54 (137.2 cm) 36-1/4 (92.1 cm) HMLAB018 12'-6 (381.0 cm) 54 (137.2 cm) 36-1/4 (92.1 cm) HMLAB019 14'-6 (442.0 cm) 54 (137.2 cm) 36-1/4 (92.1 cm) 6 www.fishersci.com

Thermo Scientific Hamilton Steel Laboratory Furniture Workstation Assemblies Island Assembly with Sink and Reagent Shelving 14'-6 n Nine-cabinet standing height island assembly with end sink and 22-3/4 (57.8 cm) high reagent shelving n 1 (2.54 cm) thick black Epoxy Resin work surface n Black Epoxy Resin sink, includes sink hanger n One deck-mount mixing faucet, two single-service faucets, two cupsinks, plastic P-trap, six deck-mount double gas/air/vacuum cocks and two deck-mount double-faced duplex electrical outlet boxes Height with Length Work Surface HMLAB020 14'-6 (442.0 cm) 54 (137.2 cm) 36-1/4 (92.1 cm) Overall Height = 58 (147.3 cm) Island Assembly with Sink and Reagent Shelving 11'-6 n Seven-cabinet standing height island assembly with end sink and 22-3/4 (57.8 cm) high reagent shelving n 1 (2.54 cm) thick black Epoxy Resin work surface n Black Epoxy Resin sink, includes sink hanger n One deck-mount mixing faucet, one single-service faucet, plastic P-trap, one cupsink, five deck-mount double gas/air/vacuum cocks and two deck-mount double-faced duplex electrical outlet boxes Height with Length Work Surface HMLAB021 11'-6 (350.5 cm) 54 (137.2 cm) 36-1/4 (92.1 cm) Overall Height = 58 (147.3 cm) Island Assembly with Sink and Reagent Shelving 17'-6 n Eleven-cabinet standing height island assembly with end sink and 22-3/4 (57.8 cm) high reagent shelving n 1 (2.54 cm) thick black Epoxy Resin work surface n Black Epoxy Resin sink, includes sink hanger n One deck-mount mixing faucet, two single-service faucets, plastic P-trap, two cupsinks, six deck-mount double gas/air/vacuum cocks and two deck-mount double-faced duplex electrical outlet boxes Height with Length Work Surface HMLAB022 17'-6 (533.4 cm) 54 (137.2 cm) 36-1/4 (92.1 cm) Overall Height = 58 (147.3 cm) Quick Ship and Express Ship Program 7

Thermo Scientific Hamilton Steel Laboratory Furniture Workstation Assemblies Sink Cabinet Assembly n Complete single cabinet standing height sink assembly with filler panels n 1 (2.54 cm) thick black Epoxy Resin work surface with backsplash n Black Epoxy Resin sink, includes sink hanger n Deck-mount mixing faucet and plastic P-trap Height with Length Work Surface HMLAB023 30 (76.2 cm) 36-1/4 (92.1 cm) HMLAB024 30 (76.2 cm) 36-1/4 (92.1 cm) 8 www.fishersci.com

Thermo Scientific Hamilton Steel Laboratory Furniture Fume Hood Assemblies Fume Hood Assembly 4' n 4-foot (121.9 cm) fume hood assembly on acid storage base cabinet n Ductwork not included n Assembly required not pre-wired or pre-piped HMLAB025 Components: 1 HM54L2591P0B Constant volume/bypass superstructure 1 HM144H8320B Acid storage base cabinet 1 HM90L06000 Vent kit 2 HM611H7320 Fillers 1 HM21L48261LFV Work surface with vent and cupsink cutout 1 HM34L13700 Cupsink 1 HM32L59600 Water service fixture 1 HM30L497AW Air service fixture 1 HM30L497GW Gas service fixture 1 HM30L497VW Vacuum service fixture 3 HM04L02400 Molding 2 HM90L04000 Corners 1 HM54L90200 Asymmetrical exhaust duct 1 HM55L76100 Blower blower sized for system with approximately 35' (10.7 m) of duct with one 90 elbow at 100 FPM face velocity, 760CFM, recommended duct size 10 (25.4 cm) n 4-foot (121.9 cm) fume hood assembly on fume hood base cabinet n Ductwork not included HMLAB029 Components: Same as above except 1 HM121H8320B Fume hood base in lieu of acid storage cab 1 HM21L48261LF Work surface in lieu of HM21L48261LRV HM90L06000 Vent kit not included Fume Hood Assembly 5' HM121H5320B HM144H5320B n 5-foot (152.4 cm) fume hood assembly on one acid storage and one fume hood base cabinet n Ductwork not included n Assembly required not pre-wired or pre-piped HMLAB026 Components: 1 HM54L2594P0B Constant volume/bypass superstructure 1 HM144H5320B Acid storage base cabinet 1 HM121H5320B Fume Hood base cabinet 1 HM90L06000 Vent Kit 2 HM611H7320 Fillers 1 HM21L60261LFV Work surface with vent and cupsink cutout 1 HM34L13700 Cupsink 1 HM32L59600 Water service fixture 1 HM30L497AW Air service fixture 1 HM30L497GW Gas service fixture 1 HM30L497VW Vacuum service fixture 3 HM04L02400 Molding 2 HM90L04000 Corners 1 HM54L90300 Asymmetrical exhaust duct 1 HM55L76900 Blower blower sized for system with approximately 35' (10.7 m) of duct with one 90 elbow at 100 FPM face velocity, 1000CFM, recommended duct size 12 (30.5 cm) n 5-foot fume hood assembly on two fume hood base cabinets n Ductwork not included HMLAB030 Components: Same as above except 2 HM121H5320B Fume hood base cabinets in lieu of one acid storage cabinet and one fume hood base cabinet 1 HM21L60261LF Work surface in lieu of HM21L60261LRV HM90L06000 Vent kit not included Quick Ship and Express Ship Program 9

Thermo Scientific Hamilton Steel Laboratory Furniture Fume Hood Assemblies Fume Hood Assembly 6' Fume Hood Assembly 8' n 6-foot (182.9 cm) fume hood assembly on one acid storage and one solvent storage base cabinet. n Ductwork not included. n Assembly required not pre-wired or pre-piped HM144H8320B HM121H8320B HMLAB027 Components: 1 HM54L2597P0B Constant volume/bypass superstructure 1 HM144H6320B Acid storage base cabinet 1 HM950S7791B Solvent storage base cabinet 1 HM90L06000 Vent Kit 2 HM611H7320 Fillers 1 HM21L72261LFV Work surface with vent and cupsink cutout 1 HM34L13700 Cupsink 1 HM32L59600 Water service fixture 1 HM30L497AW Air service fixture 1 HM30L497GW Gas service fixture 1 HM30L497VW Vacuum service fixture 3 HM04L02400 Molding 2 HM90L04000 Corners 1 HM54L90300 Asymmetrical exhaust duct 1 HM55L76900 Blower blower sized for system with approximately 35' (10.7 m) of duct with one 90 elbow at 100 FPM face velocity, 1250CFM, recommended duct size 12 (30.5 cm) n 6-foot fume hood assembly on two fume hood base cabinets n Ductwork not included HMLAB031 Components: Same as above except 2 HM121H6320B Fume hood base cabinets in lieu of one acid storage and one solvent storage base cabinet 1 HM21L72261LF Work surface in lieu of HM21L72261LRV HM90L06000 Vent kit not included n 8-foot (243.8 cm) fume hood assembly on one acid storage and one fume hood base cabinet n Ductwork not included n Assembly required not pre-wired or pre-piped HMLAB028 Components: 1 HM54L2600P0B Constant volume/bypass superstructure 1 HM144H8320B Acid storage base cabinet 1 HM121H8320B Fume hood base cabinet 1 HM90L06000 Vent kit 2 HM611H7320 Fillers 1 HM21L96262BFV Work surface with vent and 2-cupsink cutouts 2 HM34L13700 Cupsinks 2 HM32L59600 Water service fixtures 1 HM30L497AW Air service fixture 1 HM30L497GW Gas service fixture 1 HM30L497VW Vacuum service fixture 4 HM04L02400 Molding 2 HM90L04000 Corners 1 HM54L90400 Asymmetrical exhaust duct 1 HM55L81300 Blower blower sized for system with approximately 35' (1006.8 cm) of duct with one 90 elbow at 100 FPM face velocity, 1710CFM, recommended duct size 14 (35.6 cm) n 8-foot fume hood assembly on two fume hood base cabinets n Ductwork not included 10 HMLAB032 Components: Same as above except 2 HM121H8320B Fume hood base cabinets in lieu of one acid storage and one fume hood base cabinet 1 HM21L96262BF Work surface with two cupsinks cutouts only in lieu of HM21L96262BRV HM90L06000 Vent kit not included www.fishersci.com

Thermo Scientific Hamilton Steel Laboratory Furniture Sitting Height Base Cabinets 29-3/8 high x 21-5/8 deep 21-5/8 (54.9 cm) Typical End View Right-hinged 29-3/8 (74.6 cm) Left-hinged Single Door Cabinets n Standard without locks n Shelves are adjustable in half-inch increments n All cabinets include a cutout for service access; if cabinet backs are exposed, a finished back is required n See page 14 for base molding and stainless steel corners n Holes are located in the toebase at each front corner for access to leveling device n Work surfaces are ordered separately; see page 31 n See page 2 for ordering information n Cupboard cabinet with right or left hinged door n One adjustable shelf Right-hinged HM102H2220B HM102H4220B Left-hinged HM103H2220B HM103H4220B 18 (45.7 cm) 24 (61.0 cm) 18 (45.7 cm) 24 (61.0 cm) Drawer Cabinets Door/Drawer Cabinets n Two 6 (15.4 cm) high drawers above one 12 (30.4 cm) high file drawer n Includes pullboard HM130H2220B HM130H4220B 18 (45.7 cm) 24 (61.0 cm) n Two 12 (30.4 cm) high file drawers HM140H2220B HM140H4220B 18 (45.7 cm) 24 (61.0 cm) n Four 6 (15.4 cm) high drawers n Includes pullboard HM133H2220B HM133H4220B 18 (45.7 cm) 24 (61.0 cm) Double Door Cabinets n Cupboard cabinet with solid hinged doors n One adjustable shelf HM106H6220B HM106H8220B n One 6 (15.4 cm) high drawer above cupboard n Includes pullboard Right-hinged HM126H2220B HM126H4220B Left-hinged HM127H2220B HM127H4220B 18 (45.7 cm) 24 (61.0 cm) 18 (45.7 cm) 24 (61.0 cm) n One 6 (15.4 cm) high drawer above two 9 (22.8 cm) high drawers alongside right-hinged cupboard n One adjustable shelf HM168H6220B Quick Ship and Express Ship Program 11

Thermo Scientific Hamilton Steel Laboratory Furniture Standing Height Base Cabinets 35-1/4 high x 21-5/8 deep 21-5/8 (54.9 cm) Typical End View Right-hinged 35-1/4 (89.5 cm) Left-hinged n Standard without locks n Shelves are adjustable in half-inch increments n All cabinets include a cutout for service access; if cabinet backs are exposed, a finished back is required n See page 14 for base molding and stainless steel corners n Holes are located in the toebase at each front corner for access to leveling device n Work surfaces are ordered separately; see page 31 n See page 2 for ordering information Door/Drawer Cabinets n One 6 (15.2 cm) high drawer above a cupboard n One adjustable shelf in cupboard Right-hinged HM136H2320B HM136H4320B Left-hinged HM137H2320B HM137H4320B 18 (45.7 cm) 24 (61.0 cm) 18 (45.7 cm) 24 (61.0 cm) n Two 6 (15.2 cm) high drawers above a cupboard n One adjustable shelf in cupboard Right-cupboard Left-cupboard HM148H6320B HM148H7320B HM148H8320B 42 (106.7 cm) Single Door Cabinets n Cupboard cabinet with right or left hinged door n One adjustable shelf n Two 6" (15.2 cm) high side-by-side drawers above one 6" (15.2 cm) and two 9" (22.7 cm) high drawers with cupboard at right n One adjustable shelf in cupboard Right-hinged HM102H2320B HM102H4320B Left-hinged HM103H2320B HM103H4320B 18 (45.7 cm) 24 (61.0 cm) 18 (45.7 cm) 24 (61.0 cm) HM177H6320B n Two 4-1/2 (11.4 cm) high drawers above two 7-3/8 (18.7 cm) high drawers at left; cupboard at right n One adjustable shelf in cupboard Double Door Cabinets n Solid hinged double doors n One adjustable shelf HM106H5320B 30 (76.2 cm) HM106H6320B HM106H8320B Drawer Cabinets Right-cupboard HM180H6320B HM180H8320B Left-cupboard HM181H6320B HM181H8320B n One 6 (15.2 cm) high drawer above two 12 (30.4 cm) high file drawers Double Sliding Door Cabinets n Solid sliding double doors n One adjustable shelf HM141H2320B HM141H4320B 18 (45.7 cm) 24 (61.0 cm) HM109H6320B HM109H8320B n Two 6 (15.2 cm) high drawers above two two 9 (22.8 cm) high drawers HM164H2320B HM164H4320B 18 (45.7 cm) 24 (61.0 cm) 12 www.fishersci.com

Thermo Scientific Hamilton Steel Laboratory Furniture Standing Height Base Cabinets 35-1/4 high x 21-5/8 deep 35-1/4 (89.5 cm) 21-5/8 (54.9 cm) Unless otherwise noted Typical End View Drawer Cabinets (Continued) n Standard without locks n Shelves are adjustable in half-inch increments n All cabinets include a cutout for service access; if cabinet backs are exposed, a finished back is required n See page 14 for base molding and stainless steel corners n Holes are located in the toebase at each front corner for access to leveling device n Work surfaces are ordered separately; see page 31 n See page 2 for ordering information n Two 6 (15.2 cm) high drawers above two 9 (22.8 cm) high drawers HM164H6320B HM164H8320B n Four 6 (15.2 cm) high drawers above four 9 (22.8 cm) high drawers HM209H6320B HM209H8320B Double Door End Sink Cabinets Fume Hood Base Cabinets Corner Base Cabinets n Flush front panel above solid hinged doors n Toespace at front and sides n Back has cutout for large sinks n Sink supports are included HM116H7320B HM118H9320B n Solid hinged door on accessible portion, framed-in portion is enclosed with a steel panel n Door is 22-1/2 (57.2 cm) wide Right door cupboard HM220H8320B Left door cupboard HM221H8320B 52 (132.1 cm) 58 (147.3 cm) n Flush front panel above solid hinged doors n Does not include shelf to allow for storing large equipment HM121H5320B HM121H6320B HM121H8320B 30 (76.2 cm) Double Door Sink Cabinets n Four 6 (15.2 cm) high drawers above two 9 (22.8 cm) high drawers HM200H6320B HM200H8320B n Solid hinged doors n Back has cutout for large sinks n Sink supports are included HM115H5320B HM115H6320B HM115H8320B 30 (76.2 cm) 18-1/8 32-7/8 (46.0 cm) (83.5 cm) 21-5/8 (54.9 cm) 16 (40.6 cm) Top View Hanger Brackets n Solid hinged door n One adjustable shelf n Provides over 11 cubic feet of storage space Right-hinged Only HM422H6320B 32-7/8 (83.5 cm) n Sink supports and hanger brackets required for installation of an epoxy resin sink in a corner base cabinet HM52L75600 HM52H75000 Hanger brackets Sink support Sink Support Quick Ship and Express Ship Program 13

Thermo Scientific Hamilton Steel Laboratory Furniture Standing Height Base Cabinets, Acid and Solvent Storage, Accessories Acid Storage Base Cabinets n Flush front panel above solid hinged doors n Chemical resistant Resisto-roc lining n One adjustable shelf n Vent in back is 10 (25.4 cm) from right end HM144H5320B HM144H6320B HM144H8320B 30 (76.2 cm) Base Molding/Stainless Steel Corners n Base molding is coved and pliable to conform to irregularities in the floor surface n lengths HM04L02400 Base molding HM90L04000 Stainless steel corner Solvent Storage Base Cabinets FLAMMABLE KEEP FIRE AWAY n Polyolefin vent assembly for use with acid storage cabinets shown above HM90L06000 n For storage of flammable/combustible materials n Self-closing locking double doors n One adjustable shelf n Two 2 (5.1 cm) pipe threaded vent outlets with bungs plugs on back n Warning label is included n 22 (55.9 cm) cabinet depth n Factory Mutual Approved n UL Listed n Complies with NFPA Standards and OSHA Regulations Pipe Support Frame n For use to support work surface and to form a chase to carry service lines n Recommended when space between rear of cabinet and wall or two back-to-back cabinets, as with island assemblies, is 7-3/8 (18.7 cm) or greater For sitting height cabinets HM57L41100 For standing height cabinets HM57L42300 FLAMMABLE KEEP FIRE AWAY Full height doors HM950S7521B 30 (76.2 cm) HM950S7531B HM950S7551B Flush panel above doors HM950S7781B 30 (76.2 cm) HM950S7791B HM950S7811B 14 www.fishersci.com

Thermo Scientific Hamilton Steel Laboratory Tables, Frames and Components Base Cabinets Fillers and Scribes Front Filler Panels Rear Filler Panel n For use between adjacent base cabinets n Can be cut to size in the field n Includes concealed clips for attaching to the cabinet For sitting height cabinets HM614H6220 12 (30.5 cm) For standing height cabinets HM614H6320 12 (30.5 cm) n For use to close space at rear of base cabinet when 30 deep work surface is specified n Can be cut to size in the field n Includes concealed clips for attaching to the cabinet For sitting height cabinets HM611H7220 7-3/8 (18.7 cm) For standing height cabinets HM611H7320 7-3/8 (18.7 cm) End Rear Filler for Sink Cabinet n For end sink cabinet product numbers HM116H7320B/HM118H9320B and for island or peninsula assemblies n Can be cut to size in the field n Includes concealed clips for attaching to the cabinet Rear Scribe n For use to close space at rear of base cabinet when a 24 deep work surface is specified n Can be cut to size in the field n Includes concealed clips for attaching to the cabinet Center Filler Panels Corner Filler Panels For standing height cabinets HM614H3420 7-3/8 (18.7 cm) n For use between back-to-back base cabinets n Can be cut to size in the field n Includes concealed clips for attaching to the cabinet For sitting height cabinets HM612H8220 8-3/4 (22.2 cm) HM612H4220 14-3/4 (37.5 cm) For standing height cabinets HM612H8320 8-3/4 (22.2 cm) HM612H4320 14-3/4 (37.5 cm) n For base cabinets joined at a right angle n Can be cut to size in the field End Scribe For sitting height cabinets HM618H0240 1-3/8 (3.49 cm) HM618H0230 2-3/8 (6.03 cm) HM618H0250 3-3/8 (8.57 cm) For standing height cabinets HM618H0340 1-3/8 (3.49 cm) HM618H0330 2-3/8 (6.03 cm) HM618H0350 3-3/8 (8.57 cm) n For use to close space at end of base cabinet adjacent to a wall n Can be cut to size in the field n Includes concealed clips for attaching to the cabinet For sitting height cabinets HM600H2220 1 (2.54 cm) HM600H6220 6 (15.2 cm) For standing height cabinets HM600H2320 1 (2.54 cm) HM600H6320 6 (15.2 cm) n Includes concealed clips for attaching to the cabinet For sitting height cabinets HM607H1220 1 x 1 (2.50 cm) HM607H2220 2 x 2 (5.10 cm) For standing height cabinets HM607H1320 1 x 1 (2.50 cm) HM607H2320 2 x 2 (5.10 cm) Quick Ship and Express Ship Program 15

Thermo Scientific Hamilton Steel Laboratory Tables, Frames and Components Wall Cases 31 high x 13 deep 13 (33.0 cm) Typical End View 31 (78.7 cm) n Cases include soffit bottoms n Standard without locks n Two shelves are included and are adjustable in half-inch increments n Cases have integral finished backs and fixed hanger rails; wall hanger cleats are included n 7/32 (.56 cm) thick glass is used on cases with glass doors n See page 2 for ordering information Unframed Glass Sliding Double Door Cabinets HM722H6330 HM722H8330 Corner Wall Cases Open Front Cases HM700H6330 HM700H8330 n Solid right-hinged door HM723H2330B n Framed glass right-hinged door Solid Hinged Double Doors HM724H2330B HM706H6330B HM706H8330B 25-23/32 (63.9 cm) Framed Glass Hinged Double Doors HM712H6330B HM712H8330B Solid Sliding Double Doors HM715H6330B HM715H8330B 13 (33.0 cm) Scribes, Fillers for Wall Cases 18 (45.7 cm) Dimensions - 13 deep corner wall case n For use on exposed ends of wall cases to conceal hanger rails n Can be cut to size in the field n Includes concealed clips for attaching to the wall case HM618H0360 1-3/8 (3.49 cm) Framed Glass Sliding Double Doors n For use to close space at end of wall case adjacent to a wall n Can be cut to size in the field n Includes concealed clips for attaching to the wall case HM718H6330B HM718H8330B HM601H2330 HM601H6330 1 (2.54 cm) 6 (15.2 cm) 16 www.fishersci.com

Thermo Scientific Hamilton Steel Laboratory Tables, Frames and Components Tall Storage Cases 84-5/8 high x 22 deep n When installing tall cases under soffits, 85-1/2 minimum height is required from finished floor to finished soffit n Standard without locks Framed Glass Hinged Double Doors HM812H6920B HM812H8920B 84-5/8 (215.0 cm) n Five shelves are included and are adjustable in half-inch increments n 7/32 (.56 cm) thick glass is used on cases with glass doors n See page 2 for ordering information Also available: HM812H696LB n 16 (40.6 cm) depth n With lock 22 (35.9 cm) Typical End View Open Front Cases Framed Glass Sliding Double Doors HM800H6920 HM800H8920 HM818H6920B HM818H8920B Solid Hinged Double Doors Fillers for Tall Cases HM806H6920B HM806H8920B n For use to close space at end of tall case adjacent to a wall n Can be used on right or left side of tall case n Can be cut to size in the field n Includes concealed clips for attaching to the tall case HM605H2920 HM605H6920 1 (2.54 cm) 6 (15.2 cm) Quick Ship and Express Ship Program 17

Thermo Scientific Hamilton Steel Laboratory Tables, Frames and Components Tables, Frames and Components Steel tables are adjustable or fixed height on levelers or casters for mobility. The Thermo Scientific Hamilton Quick Ship Program has just the table to fit your needs. You can incorporate a table or desk into or at the end of your lab bench by using components such as rails, frames and legs. Four-leg Adjustable-height Tables n Powder painted steel construction n Order work surfaces below n Adjustable height legs - minimal tools required for readjustment n Table with levelers - 600 lb. weight capacity; Table with casters - 300 lb. weight capacity n Height: 28 to 37 (71.1-94.0 cm) Depth: 29 (73.7 cm) With Levelers HMAFX93600 HMAFX94800 HMAFX96000 With Casters HMAEX93600 HMAEX94800 HMAEX96000 60 (152.4 cm) 60 (152.4 cm) Laboratory Tables n For black epoxy resin work surface, add suffix R to the end of the product number; for black chemical resistant highpressure laminate work surface, add suffix C to the end of the product number n Tops are attached with silicone based adhesive which is included n Assembly is required Number of Height Depth Drawers HM950H330B_ 30 (76.2 cm) 24 (61.0 cm) 1 HM950H334B_ 30 (76.2 cm) 24 (61.0 cm) 2 HM950H338B_ 60 (152.4 cm) 30 (76.2 cm) 24 (61.0 cm) 2 HM950H342B_ 72 (182.9 cm) 30 (76.2 cm) 24 (61.0 cm) 3 HM950H380B_ 24 (61.0 cm) 1 HM950H384B_ 24 (61.0 cm) 2 HM950H388B_ 60 (152.4 cm) 24 (61.0 cm) 2 HM950H392B_ 72 (182.9 cm) 24 (61.0 cm) 3 HM950H331B_ 30 (76.2 cm) 30 (76.2 cm) 1 HM950H335B_ 30 (76.2 cm) 30 (76.2 cm) 2 HM950H339B_ 60 (152.4 cm) 30 (76.2 cm) 30 (76.2 cm) 2 HM950H343B_ 72 (182.9 cm) 30 (76.2 cm) 30 (76.2 cm) 3 HM950H381B_ 30 (76.2 cm) 1 HM950H385B_ 30 (76.2 cm) 2 HM950H389B_ 60 (152.4 cm) 30 (76.2 cm) 2 HM950H393B_ 72 (182.9 cm) 30 (76.2 cm) 3 Work Surfaces n Thickness: 1 (2.5 cm) n Color: Black n Chemical resistant high pressure laminate or Epoxy Resin s Chemsurf Epoxy Resin HM21L3036C HM21L3036E HM21L3048C HM21L3048E HM21L3060C HM21L3060E 60 (152.4 cm) Epoxyn Balance Table n Diminishes effects of floor vibrations on balances n All components manufactured from 2-1/2 (6.35 cm) thick cast slabs of white resin Depth Height HM019945 35 (88.9 cm) 24 (61.0 cm) 31 (78.7 cm) Storage Shelf for Four-Leg Adjustable-Height Tables n Attaches to lower leg n 150 lb. shelf capacity n Depth 29 (73.7 cm) HM923H9360 HM923H9480 HM923H9600 60 (152.4 cm) Epoxyn Stabilizing Slab n For use on existing benchtop to reduce effects of floor vibrations n Manufactured of white resin Depth Height HM0199410 20 (50.8 cm) 13 (33.0 cm) 2-1/2 (6.35 cm) 18 www.fishersci.com

Thermo Scientific Hamilton Steel Laboratory Tables, Frames and Components Rails and Frames Kneespace Rail Rails must be ordered in both front and back support Frame with One Drawer Frame with Two Drawers Frame with Three Drawers Use rails/frames with drawers to support work surfaces suspended between two base cabinets, between cabinet and wall, or with leg assemblies found on page 20. n Height for all rails and frames is 4-1/2 (11.4 cm). Depth Number of Drawers HM500H4010 24 (61.0 cm) N/A N/A HM501H2210B 24 (61.0 cm) 21-1/2 (54.6 cm) 1 HM501H2810B 24 (61.0 cm) 28 (71.1 cm) 1 HM500H4020 30 (76.2 cm) N/A N/A HM501H2220B 30 (76.2 cm) 21-1/2 (54.6 cm) 1 HM501H2820B 30 (76.2 cm) 28 (71.1 cm) 1 HM500H4030 N/A N/A HM502H2200B 21-1/2 (54.6 cm) 2 HM502H2800B 28 (71.1 cm) 2 HM500H4040 42 (106.7 cm) N/A N/A HM502H2210B 42 (106.7 cm) 21-1/2 (54.6 cm) 2 HM502H2810B 42 (106.7 cm) 28 (71.1 cm) 2 HM500H4050 N/A N/A HM502H2220B 21-1/2 (54.6 cm) 2 HM502H2820B 28 (71.1 cm) 2 HM500H4060 54 (137.2 cm) N/A N/A HM502H2230B 54 (137.2 cm) 21-1/2 (54.6 cm) 2 HM502H2830B 54 (137.2 cm) 28 (71.1 cm) 2 HM500H4070 60 (152.4 cm) N/A N/A HM501H4270 60 (152.4 cm) 21-1/2 (54.6 cm) 1 HM501H4870 60 (152.4 cm) 28 (71.1 cm) 1 HM500H4080 66 (167.6 cm) N/A N/A HM503H2220B 66 (167.6 cm) 21-1/2 (54.6 cm) 3 HM503H2820B 66 (167.6 cm) 28 (71.1 cm) 3 HM500H4090 72 (182.9 cm) N/A N/A HM503H2230B 72 (182.9 cm) 21-1/2 (54.6 cm) 3 HM503H2830B 72 (182.9 cm) 28 (71.1 cm) 3 Use 21-1/2 (54.6 cm) deep rails and frames in base cabinet assemblies. Quick Ship and Express Ship Program 19

Thermo Scientific Hamilton Steel Laboratory Tables, Frames and Components Table Legs and Frame Components End Leg Assembly n Double leg assembly with adjustable leveler glides and vinyl leg shoes to provide support at either end of a table frame n Attachment hardware is included 21-5/8 (54.9 cm) deep HM522H3010 HM522H3610 28 (71.1 cm) deep HM522H3020 HM522H3620 Height 29 (73.7 cm) 35 (88.9 cm) 29 (73.7 cm) 35 (88.9 cm) Center Leg Assembly with Leg Rail n Center leg assembly with adjustable leveler glides and vinyl leg shoes to provide support at the center of a table frame n Includes crossmember for added rigidity (must be field attached) n Use to connect two frames n Attachment hardware is included 21-5/8 (54.9 cm) deep HM523H4010 HM523H4610 28 (71.1 cm) deep HM523H4020 HM523H4620 Height 29 (73.7 cm) 35 (88.9 cm) 29 (73.7 cm) 35 (88.9 cm) End Leg Assembly with Leg Rail n Double leg assembly with adjustable leveler glides and vinyl leg shoes to provide support at either end of a table frame n Includes crossmember for added rigidity (must be field attached) n Attachment hardware is included 21-5/8 (54.9 cm) deep HM522H4010 HM522H4610 28 (71.1 cm) deep HM522H4020 HM522H4620 Height 29 (73.7 cm) 35 (88.9 cm) 29 (73.7 cm) 35 (88.9 cm) Leg Rails n Crossrails provide additional rigidity for leg units and are required for stretcher rail installation, see below HM529H2200 HM529H2800 of Leg Unit 21-5/8 (55.9 cm) 28 (71.1 cm) Center Leg Assembly n Center leg assembly with adjustable leveler glides and vinyl leg shoes to provide support at the center of a table frame n Use to connect two frames n Attachment hardware is included 21-5/8 (54.9 cm) deep HM523H3010 HM523H3610 28 (71.1 cm) deep HM523H3020 HM523H3620 Height 29 (73.7 cm) 35 (88.9 cm) 29 (73.7 cm) 35 (88.9 cm) Leg Stretcher n Crossbar between two pairs of table legs to add stability n For use with steel leg assemblies with leg rails n Attachment hardware is included, leg rails must be drilled for field installation of the leg stretcher Stretcher Length Table Top HM530H3360 30-5/32 (76.6 cm) HM530H3480 42-5/32 (107.1 cm) HM530H3600 54-5/32 (137.6 cm) 60 (152.4 cm) HM530H3720 66-5/32 (168.0 cm) 72 (182.9 cm) See page 21 for instruction to create a table 20 www.fishersci.com

Thermo Scientific Hamilton Steel Laboratory Tables, Frames and Components Utility Table Shelf, Panel End Support, Kneespace Panel Utility Table Shelf Kneespace Panel n Reinforced shelf for utility table n Shelf provides extra storage beneath table top n Attachment hardware included n Table legs require crossrails for shelf installation. n Use at rear of kneespace to provide physical and visual barrier 17-1/2 (44.4 cm) deep HM530H2360 HM530H2480 HM530H2600 HM530H2720 23-7/8 (59.7 cm) deep HM530H8360 HM530H8480 HM530H8600 HM530H8720 Top 60 (152.4 cm) 72 (182.9 cm) 60 (152.4 cm) 72 (182.9 cm) Work Surface Height 30 (76.2 cm) HM616H4220 HM616H5220 HM616H6220 HM616H7220 HM616H8220 HM616H4320 HM616H5320 HM616H6320 HM616H7320 HM616H8320 Panel 24 (61.0 cm) 30 (76.2 cm) 42 (106.7 cm) 24 (61.0 cm) 30 (76.2 cm) 42 (106.7 cm) Panel End Support n Use in place of legs on one end to support drawer frame n Angles are bolted to panel for easy removal n Attachment hardware is included 22 (55.9 cm) deep HM525H3020 HM525H3620 28 (71.1 cm) deep HM525H3080 HM525H3680 Height 29 (73.7 cm) 35 (88.9 cm) 29 (73.7 cm) 35 (88.9 cm) Instructions HM522H3610 HM21L2436E HM501H2220B HM522H3610 HM522H3610 n When creating your own table, for each end or center leg used to construct a table, add 2 (5 cm) to the overall width. n To select the proper size top, allow for a minimum of 1 (2.5 cm)overhang at each exposed table end. 1 + 2 + 30 + 2 1 = 36 Quick Ship and Express Ship Program 21

Thermo Scientific Hamilton Steel Laboratory Tables, Frames and Components Mobile Instrument Cart Assemblies Load Bearing Weights 18 deep shelves = 130 lbs. each / Split work surfaces = 300 lbs. each, 600 lbs. total / Standard overall cart = 900 lbs. Please call Fisher Customer Service for assistance with any load bearing weight questions. Full-height Mobile Instrument Carts n Two 31 (78.7 cm) deep x wide antique white tops on adjustable height frames n Two 18 (45.7 cm) deep x wide upper adjustable shelves n Suspended cabinet is 22-1/4 (56.5 cm) deep x 30 (76.2 cm) wide x 25 (63.5 cm) high with locks n Suspended drawer is 22-1/4 (56.5 cm) deep x 30 (76.2 cm) wide x 3 (7.62 cm) high with lock n Overall dimensions are 72 (182.9 cm) wide x 31 (78.7 cm) deep x 78-1/2 (199.1 cm) height HMMICLAB001 n Two 31 (78.7 cm) deep x wide antique white tops on adjustable height frames n Two 18 (45.7 cm) deep x wide upper adjustable shelves n Bottom fixed shelves n Overall dimensions are 72 (182.9 cm) wide x 31 (78.7 cm) deep x 78-1/2 (199.1 cm) height HMMICLAB002 n One 31 (78.7 cm) deep x wide antique white top on adjustable height frame n Three 18 (45.7 cm) deep x wide upper adjustable shelves n Overall dimensions are 72 (182.9 cm) wide x 31 (78.7 cm) deep x 78-1/2 (199.1 cm) height HMMICLAB003 n One 31 (78.7 cm) deep x 60 (152.4 cm) wide antique white top on adjustable height frame n One 18 (45.7 cm) deep x 60 (152.4 cm) wide upper adjustable shelf n Suspended cabinet is 22-1/4 (56.5 cm) deep x 24 (61.0 cm) wide x 19 (48.3 cm) high with locks n Suspended drawer is 22-1/4 (56.5 cm) deep x 30 (76.2 cm) wide x 3 (7.62 cm) high with lock n Overall dimensions are 60 (152.4 cm) wide x 31 (78.7 cm) deep x 78-1/2 (199.1 cm) height HMMICLAB005 n One 31 (78.7 cm) deep x 60 (152.4 cm) wide antique white top on adjustable height frame n One 18 (45.7 cm) deep x 60 (152.4 cm) wide upper adjustable shelf n Suspended drawer is 22-1/4 (56.5 cm) deep x 30 (76.2 cm) wide x 3 (7.62 cm) high with lock n Overall dimensions are 60 (152.4 cm) wide x 31 (78.7 cm) deep x 78-1/2 (199.1 cm) height HMMICLAB006 n One 31 (78.7 cm) deep x 60 (152.4 cm) wide antique white top on adjustable height frame n One 18 (45.7 cm) deep x 60 (152.4 cm) wide upper adjustable shelf n Bottom fixed shelf n Overall dimensions are 60 (152.4 cm) wide x 31 (78.7 cm) deep x 78-1/2 (199.1 cm) height 22 n Two 31 (78.7 cm) deep x wide antique white tops on adjustable height frames n Two 18 (45.7 cm) deep x wide upper adjustable shelves n Suspended cabinet is 22-1/4 (56.5 cm) deep x 30 (76.2 cm) wide x 19 (48.3 cm) high with locks n Suspended drawer is 22-1/4 (56.5 cm) deep x 30 (76.2 cm) wide x 3 (7.62 cm) high with lock n Overall dimensions are 72 (182.9 cm) wide x 31 (78.7 cm) deep x 78-1/2 (199.1 cm) height HMMICLAB004 HMMICLAB007 Low-height Mobile Instrument Carts n One 31 (78.7 cm) deep x wide antique white top on adjustable height frame n Bottom fixed shelf n Overall dimensions are wide x 31 (78.7 cm) deep x 37 (91.4 cm) maximum height HMMICLAB008 www.fishersci.com

Thermo Scientific Hamilton Steel Laboratory Tables, Frames and Components Mobile Instrument Cart Assemblies and Suspended Cabinets Mobile Instrument Carts with Upper Frame Assembly n Lower mobile cart with upper frame to make a full-height assembly n One 31 (78.7 cm) deep x wide antique white top on adjustable height frame n One 18 (45.7 cm) deep x wide upper adjustable shelf n Overall dimensions are wide x 31 (78.7 cm) deep x 78-1/2 (199.1 cm) height HMMICLAB009 n Modular storage cabinets hang under work surface cantilever frame of mobile instrument cart n Stainless steel hinges for doors, ball-bearing drawer suspension, and warm-to-the-touch recessed drawer and door pulls n With locks n Depth = 21-5/8 (54.9 cm) n Mounting hardware and instructions included Two-drawer Cabinet n One 6 (15.2 cm) high drawer above one 12 (30.5 cm) high file drawer n Cabinet is 19 (48.3 cm) high Low Profile Mobile Cart Quick Ship and Express Ship Program n Lower mobile cart with upper frame to make a full-height assembly n One 31 (78.7 cm) deep x wide antique white top on adjustable height frame n Suspended cabinet is 22-1/4 (56.5 cm) deep x wide x 25 (63.5 cm) high with locks n One 18 (45.7 cm) deep x wide upper adjustable shelf n Overall dimensions are wide x 31 (78.7 cm) deep x 78-1/2 (199.1 cm) height HMMICLAB010 n Lower mobile cart with upper frame to make a full-height assembly n One 31 (78.7 cm) deep x 72 (182.9 cm) wide antique white top on adjustable height frame n One 18 (45.7 cm) deep x 72 (182.9 cm) wide upper adjustable shelf n Overall dimensions are 72 (182.9 cm) wide x 31 (78.7 cm) deep x 78-1/2 (199.1 cm) height HMMICLAB011 n Four 3 (7.62 cm) diameter locking casters n Top is 3/4 (1.91 cm) nominal thick antique white plastic laminate with.3 cm black PVC edge banding n Legs painted black n Weight capacity is 300 lbs. (136 kg) n Overall dimensions are 30 (76.2 cm) wide x 24 (61.0 cm) deep x 12 (30.5 cm) height HM950H040 Drawer/Door Cabinets Drawer Cabinets Suspended Drawer HM571H412LB 24 (61.0 cm) n One 6 (15.2 cm) high drawer above one 12 (30.5 cm) high hinged door n Cabinet is 19 (48.3 cm) high Right hinged HM568H412LB Left hinged HM569H412LB 24 (61.0 cm) 24 (61.0 cm) n Two side-by-side 6 (15.2 cm) high drawers above cupboard with two 18 (45.7 cm) high hinged doors n Cabinet is 25 (63.5 cm) high HM577H522LB HM577H622LB 30 (76.2 cm) n Two side-by-side 6 (15.2 cm) high drawers above two full-width 6 (15.2 cm) high drawers n Cabinet is 19 (48.3 cm) high HM578H512LB 30 (76.2 cm) n Designed to hang under cantilevered work surface n Mountable in kneespace from frame on cantilevered or table work surface n Ball-bearing suspension and warmto-the-touch recessed drawer pull n Includes lock n Drawer is 3 (7.62 cm) high and 22 (55.9 cm) deep HM520H622LB 30 (76.2 cm) 23

Thermo Scientific Hamilton Solvent Storage Cabinets SafeStor General Information n All SafeStor cabinets, except 950S8740 and 950S8750, have been submitted, tested and listed by FM (Factory Mutual) 6050 n Dimensions are with levelers retracted n All shelves adjustable in nominal 1/2 (12 cm) increments n Optional vents to fume hood piping assembly available when required n All solvent cabinets include locked doors n Available in the following colors: AZ Blue, RJ Red, SY Yellow Back Spill Tray Typical Detail Spill Tray Door Dimensions are nominal and illustrations and specifications are based on the latest product information available at the time of publication. The right is reserved to make changes at any time without notice. Single Door Storage Cabinets 24 n Right hinged manual or self-closing door n One adjustable shelf and spill tray at bottom n Vent plug on left and right sides n 17 (43.2 cm) wide x 22 (559 cm) high x 17 (43.2 cm) deep n Meets NFPA-30 Type of Door Capacity HM950S8740 Manual 4 Gal. HM950S8750 Self-closing 4 Gal. n Right hinged manual or self-closing door n One adjustable shelf and spill tray at bottom n Vent plug on left and right sides n 23-1/4 (59 cm) wide x 35 (88.9 cm) high x 18 (45.7 cm) deep Type of Door Capacity HM950S8760 Manual 12 Gal. HM950S8770 Self-closing 12 Gal. n Right hinged manual closing door n One adjustable shelf and spill tray at bottom n Vent plug on left and right sides n 23-1/4 (59 cm) wide x 44 (111.8 cm) high x 18 (45.7 cm) deep Type of Door Capacity HM950S8780 Manual 15 Gal. Double Door Storage Cabinets 36 Wide n Double manual closing doors n One adjustable shelf and spill tray at bottom n Vent plug on left and right sides n wide x 35 (88.9 cm) high x 24 (61 cm) deep Type of Door Capacity HM950S8670 Manual 30 Gal. Double Door Storage Cabinets 36 Wide (Continued) n Double manual or self-closing doors n One adjustable shelf and spill tray at bottom n Two vent plugs on rear of cabinet n wide x 35-1/4 (89.5 cm) high x 21-5/8 (54.9 cm) deep Type of Door Capacity HM950S8800 Manual 22 Gal. HM950S8810 Self-closing 22 Gal. n Double manual or self-closing doors n Two adjustable shelves and spill tray at bottom n Vent plug on left and right sides n wide x 65 (165.1 cm) high x 34 (86.4 cm) deep Type of Door Capacity HM950S8700 Manual 60 Gal. HM950S8710 Self-closing 60 Gal. Double Door Storage Cabinets 42 Wide n Double manual closing doors n Spill tray at bottom n Vent plug on left and right sides n 42 (106.7 cm) wide x 18-1/4 (46.4 cm) high x 18 (45.7 cm) deep Type of Door Capacity HM950S8720 Manual 12 Gal. n Double manual closing doors n One adjustable shelf and spill tray at bottom n Vent plug on left and right sides n 42 (106.7 cm) wide x 24-1/4 (61.7 cm) high x 18 (45.7 cm) deep Type of Door Capacity HM950S8730 Manual 17 Gal. Double Door Storage Cabinets 42 Wide (Continued) n Double manual or self-closing doors n One adjustable shelf and spill tray at bottom n Vent plug on left and right sides n 42 (106.7 cm) wide x 44 (111.8 cm) high x 18 (45.7 cm) deep Type of Door Capacity HM950S8650 Manual 30 Gal. HM950S8660 Self-closing 30 Gal. n Double manual or self-closing doors n Two adjustable shelves and spill tray at bottom n Vent plug on left and right sides n 42 (106.7 cm) wide x 65 (165.1 cm) high x 18 (45.7 cm) deep Type of Door Capacity HM950S8680 Manual 45 Gal. HM950S8690 Self-closing 45 Gal. n Double manual closing doors n Five adjustable shelves and spill tray at bottom n Vent plug on left and right sides n 42 (106.7 cm) wide x 44 (111.8 cm) high x 12 (30.5 cm) deep Type of Door Capacity HM950S8790 Manual 20 Gal. www.fishersci.com

Thermo Scientific Hamilton Wood Base Cabinets and Components Standard Features Cabinet Front and/or Drawer Style Cabinet Top Frame Front horizontal and rear vertical rails Drawer/Door Pull Direction Horizontal on all drawers and vertical on all doors Flush Overlay Regency Cabinet fronts provide modern styling with tight reveals between doors and drawers. Veneer Type Plain-sliced Red Oak, A-grade Grain Direction Plain-sliced select White Maple, A-grade Removable Back Panel One piece behind cupboard and 36 (91.4 cm) wide drawer units, open behind drawers on less than wide units Drawer Joinery Lock Joint.5 cm white finished MDF, no divider grooves Drawer Suspension 3/4 Extension Open roller 100 lb. dynamic self-closing, epoxy-coated 150 lb. slides are standard on all file drawers Drawer/Door Pulls Black Wire Powdercoat Door Hinges 5-Knuckle Black Steel Hinges offer proven long-term durability Cabinet Base Plywood Integral with end panels, without levelers Lock None Door Catches Roller Catch Shelf Material Wood Veneer Core Plywood Label Holders None Combination Cabinet Core Veneer core plywood sides and bottom Base Cabinet Shelf Depth 12 (30.5 cm) Deep, Half-depth Shelf Half-depth shelves accommodate storage of tall apparatus in front of shelf Shelf Thickness 1 (2.5 cm) Thick All shelves have 100 lb. rating Shelf Clips Plated Pin and Socket Four each per shelf Finish Wheat for Oak Natural for Maple Edgebanding Wood edgeband on wood face Quick Ship and Express Ship Program 25

Thermo Scientific Hamilton Wood Base Cabinets and Components Sitting Height Base Cabinets 21-1/2 (54.6 cm) Typical End View 28-1/2 (72.3 cm) n Add the following suffix to end of to specify Oak or Maple finish: B = Oak Wheat Finish C = Maple Natural Finish n Shelves are adjustable in 1-1/4 (3.2 cm) increments n Cabinets have both outside ends finished n See page 29 for drawer module heights n Work surfaces are ordered separately; see page 31 Drawer Cabinets n With pullboard n Two 4-module high drawers above one 10-module high drawer Without card followers HM130A222B_ n Three 6-module high drawers n With pullboard 18 (45.7 cm) Open Cabinets n One adjustable shelf HM133A222B_ HM133A422B_ 18 (45.7 cm) 24 (61.0 cm) n Pullboard Door Cabinets HM200A222B_ HM200A422B_ Right-hinged (shown) HM102A222B_ HM102A422B_ Left-hinged HM103A222B_ HM103A422B_ 18 (45.7 cm) 24 (61.0 cm) 18 (45.7 cm) 24 (61.0 cm) 18 (45.7 cm) 24 (61.0 cm) Combination Cabinets n One 4-module high drawer above single cupboard n With pullboard Right-hinged (shown) HM126A222B_ HM126A422B_ Left-hinged HM127A222B_ HM127A422B_ 18 (45.7 cm) 24 (61.0 cm) 18 (45.7 cm) 24 (61.0 cm) n Full-height hinged double doors n One adjustable shelf HM106A622B_ HM106A822B_ 26 www.fishersci.com

Thermo Scientific Hamilton Wood Base Cabinets and Components Standing Height Base Cabinets 21-1/2 (54.6 cm) Typical End View Door Cabinets 35 (88.9 cm) n Add the following suffix to end of to specify Oak or Maple finish: B = Oak Wheat Finish C = Maple Natural Finish n Shelves are adjustable in 1-1/4 (3.2 cm) increments n Cabinets have both outside ends finished n See page 29 for drawer module heights n Work surfaces are ordered separately; see page 31 Drawer Cabinets (Continued) n Eight 6-module high drawers HM206A632B_ HM206A832B_ n Six 6-module high drawers HM263A632B_ HM263A832B_ n Full-height right- or left-hinged door n One adjustable shelf Right-hinged (shown) HM102A232B_ HM102A432B_ Left-hinged HM103A232B_ HM103A432B_ 18 (45.7 cm) 24 (61.0 cm) 18 (45.7 cm) 24 (61.0 cm) n Full-height swinging double doors n One adjustable shelf HM106A532B_ HM106A632B_ HM106A832B_ 30 (76.2 cm) Combination Cabinets n One 6-module high drawer above single right- or left-hinged cupboard with one adjustable shelf Right-hinged (shown) HM136A232B_ HM136A432B_ Left-hinged HM137A232B_ HM137A432B_ 18 (45.7 cm) 24 (61.0 cm) 18 (45.7 cm) 24 (61.0 cm) n Two 6-module high drawers above double cupboard with adjustable shelf n Full-height sliding double doors n One adjustable shelf HM109A632B_ HM109A832B_ HM148A532B_ HM148A632B_ HM148A732B_ HM148A832B_ 30 (76.2 cm) 42 (106.6 cm) n Four 6-module high drawers at left alongside full-height cupboard with adjustable shelf at right Drawer Cabinets n Four 6-module high drawers HM152A632B_ HM152A832B_ HM173A632B _ HM173A832B _ n Four 6-module high drawers at left and one 6-module high drawer above cupboard with adjustable shelf at right HM207A632B_ HM207A832B_ Quick Ship and Express Ship Program 27

Thermo Scientific Hamilton Wood Base Cabinets and Components Standing Height Base Cabinets, Wood Laboratory Tables Sink Cabinets Inset Panel Supports for Epoxy Resin Sinks B = Oak Wheat Finish C = Maple Natural Finish n Full-height hinged double doors HM115A5320_ HM115A6320_ HM115A8320_ 30 (76.2 cm) n End sink with full-height swinging doors n Recessed toebase at front and sides n Do not use under Pioneer TM fume hoods or any fume hoods with front mounted cupsinks HM116A7320_ HM118A9320_ n Metal frame to support and position epoxy resin sink HM52L74300 HM52L74400 HM52L74600 HM52L74700 HM52L74800 51 (129.5 cm) 57 (144.8 cm) Base Unit 30 (76.2 cm) 52 (132.0 cm) 58 (149.3 cm) Wood Laboratory Tables n For black epoxy resin work surface, add suffix R to the end of the product number; for black chemical resistant highpressure laminate work surface, add suffix C to the end of the product number n Tops are attached with silicone based adhesive which is included n Available in oak only n Wheat finish n Aluminum bar pull n Assembly is required Number of Oak Wood Height Depth Drawers HM950C330_ 30 (76.2 cm) 24 (61.0 cm) 1 HM950C334_ 30 (76.2 cm) 24 (61.0 cm) 2 HM950C338_ 60 (152.4 cm) 30 (76.2 cm) 24 (61.0 cm) 2 HM950C342_ 72 (182.9 cm) 30 (76.2 cm) 24 (61.0 cm) 3 HM950C380_ 24 (61.0 cm) 1 HM950C384_ 24 (61.0 cm) 2 HM950C388_ 60 (152.4 cm) 24 (61.0 cm) 2 HM950C392_ 72 (182.9 cm) 24 (61.0 cm) 3 HM950C331_ 30 (76.2 cm) 30 (76.2 cm) 1 HM950C335_ 30 (76.2 cm) 30 (76.2 cm) 2 HM950C339_ 60 (152.4 cm) 30 (76.2 cm) 30 (76.2 cm) 2 HM950C343_ 72 (182.9 cm) 30 (76.2 cm) 30 (76.2 cm) 3 HM950C381_ 30 (76.2 cm) 1 HM950C385_ 30 (76.2 cm) 2 HM950C389_ 60 (152.4 cm) 30 (76.2 cm) 2 HM950C393_ 72 (182.9 cm) 30 (76.2 cm) 3 Fume Hood Cabinets B = Oak Wheat Finish C = Maple Natural Finish n Front top panel inset with cabinet ends n Removable back panel Inset front top panel HM121A532B_ HM121A632B_ HM121A832B_ 30 (76.2 cm) 28 www.fishersci.com

Thermo Scientific Hamilton Wood Base Cabinets and Components Fillers for Wood Base Cabinets, Drawer Module Heights Fillers Panels for Wood Base Cabinets B = Oak Wheat Finish C = Maple Natural Finish n Rear filler panel n For closing service space at rear of cabinets with full-height ends Sitting height HM611A7220_ Standing height HM611A7320_ 7 (17.8 cm) 7 (17.8 cm) n Front filler panel n For filling space between adjacent cabinets Sitting height HM614A0220_ HM614A0420_ Standing height HM614A0320_ HM614A0520_ 6 (15.2 cm) 12 (30.5 cm) 6 (15.2 cm) 12 (30.5 cm) n Center filler panel n For closing service space at rear of back-to-back cabinets with full-height ends Sitting height HM612A8220_ HM612A4220_ Standing height HM612A8320_ HM612A4320_ 8-1/8 (20.3 cm) 14-1/8 (35.9 cm) 8-1/8 (20.3 cm) 14-1/8 (35.9 cm) n End scribe n For closing space adjacent to wall n Can be trimmed for precise fit during installation Sitting height not available Standing height HM614A1020_ 1 (2.5 cm) Drawer Module Heights for Base Cabinets Location for optional pullboard 18 Modules 24 Modules Sitting Height Standing Height Front View Side View Drawer Front Overall Height Outside Drawer Box Height Inside Drawer Box Height 5 (12.70 cm) 4 Module 3-3/8 (8.57 cm) 2-3/4 (6.88 cm) 7-1/2 (19.05 cm) 6 Module 4-1/2 (11.43 cm) 3-7/8 (9.88 cm) 10 Module 12-1/2 (31.75 cm) 9-5/8 (24.45 cm) 9 (22.88 cm) Quick Ship and Express Ship Program 29

Thermo Scientific Hamilton Wood Base Cabinets and Components Fillers for Wood Base Cabinets, Drawer Module Heights Wood Laboratory Tables n 24" (61.0 cm), 30" (76.2 cm) or 42" (106.7 cm) depths n 1" (2.5 cm) work surface in choice of three materials: black chemical resistant high pressure laminate, black epoxy resin or black plastic laminate n With or without book compartments n 30" (76.2 cm) or 36" (91.4 cm) height dimension includes work surfaces n Leg stretchers included with 36" (91.4 cm) high tables only n 4-5/16" (12.5 cm) rail height n Shipped partially assembled legs need to be attached in field n Equipped with leg levelers n Top is glued to frame n Natural finish 30'' Height 30'' Height 30'' Height 36'' Height 36'' Height 36'' Height (76.2 cm) (76.2 cm) (76.2 cm) (91.4 cm) (91.4 cm) (91.4 cm) Number of 24'' Depth 30'' Depth 42'' Depth 24'' Depth 30'' Depth 42'' Depth Book Work Surface (61.0 cm) (76.2 cm) (106.7 cm) (61.0 cm) (76.2 cm) (106.7 cm) Compartments* Material HMEMD224BC HMEMD234BC HMEMD244BC HMEMD324BC HMEMD334BC HMEMD344BC 2 CR-HPL** HMEMD224BE HMEMD234BE HMEMD244BE HMEMD324BE HMEMD334BE HMEMD344BE 2 Epoxy Resin HMEMD224BL HMEMD234BL HMEMD244BL HMEMD324BL HMEMD334BL HMEMD344BL 48" (121.9 cm) 2 P-Laminate HMEMD224PC HMEMD234PC HMEMD244PC HMEMD324PC HMEMD334PC HMEMD344PC None CR-HPL** HMEMD224PE HMEMD234PE HMEMD244PE HMEMD324PE HMEMD334PE HMEMD344PE None Epoxy Resin HMEMD224PL HMEMD234PL HMEMD244PL HMEMD324PL HMEMD334PL HMEMD344PL None P-Laminate HMEMD225BC HMEMD235BC HMEMD245BC HMEMD325BC HMEMD335BC HMEMD345BC 2 CR-HPL** HMEMD225BE HMEMD235BE HMEMD245BE HMEMD325BE HMEMD335BE HMEMD345BE 2 Epoxy Resin HMEMD225BL HMEMD235BL HMEMD245BL HMEMD325BL HMEMD335BL HMEMD345BL 54" (137.2 cm) 2 P-Laminate HMEMD225PC HMEMD235PC HMEMD245PC HMEMD325PC HMEMD335PC HMEMD345PC None CR-HPL** HMEMD225PE HMEMD235PE HMEMD245PE HMEMD325PE HMEMD335PE HMEMD345PE None Epoxy Resin HMEMD225PL HMEMD235PL HMEMD245PL HMEMD325PL HMEMD335PL HMEMD345PL None P-Laminate HMEMD226BC HMEMD236BC HMEMD246BC HMEMD326BC HMEMD336BC HMEMD346BC 2 CR-HPL** HMEMD226BE HMEMD236BE HMEMD246BE HMEMD326BE HMEMD336BE HMEMD346BE 2 Epoxy Resin HMEMD226BL HMEMD236BL HMEMD246BL HMEMD326BL HMEMD336BL HMEMD346BL 60" (152.4 cm) 2 P-Laminate HMEMD226PC HMEMD236PC HMEMD246PC HMEMD326PC HMEMD336PC HMEMD346PC None CR-HPL** HMEMD226PE HMEMD236PE HMEMD246PE HMEMD326PE HMEMD336PE HMEMD346PE None Epoxy Resin HMEMD226PL HMEMD236PL HMEMD246PL HMEMD326PL HMEMD336PL HMEMD346PL None P-Laminate HMEMD227BC HMEMD237BC HMEMD247BC HMEMD327BC HMEMD337BC HMEMD347BC 2 CR-HPL** HMEMD227BE HMEMD237BE HMEMD247BE HMEMD327BE HMEMD337BE HMEMD347BE 2 Epoxy Resin HMEMD227BL HMEMD237BL HMEMD247BL HMEMD327BL HMEMD337BL HMEMD347BL 72" (182.9 cm) 2 P-Laminate HMEMD227PC HMEMD237PC HMEMD247PC HMEMD327PC HMEMD337PC HMEMD347PC None CR-HPL** HMEMD227PE HMEMD237PE HMEMD247PE HMEMD327PE HMEMD337PE HMEMD347PE None Epoxy Resin HMEMD227PL HMEMD237PL HMEMD247PL HMEMD327PL HMEMD337PL HMEMD347PL None P-Laminate EMD series tables are only available with leg levelers * 42" depth tables with book compartments have two compartments on each side. ** Chemical resistant high pressure laminate. 30 www.fishersci.com

Thermo Scientific Hamilton Work Surfaces and Reagent Racks Work Surfaces for Wall Assemblies Work Surfaces without Cutouts n 1 (2.54 cm) thick black chemical resistant n Curb must be ordered separately Depth Epoxy resin work surfaces HM21L2418E 18 (45.7 cm) 24 (61.0 cm) HM21L2424E 24 (61.0 cm) 24 (61.0 cm) HM21L2430E 30 (76.2 cm) 24 (61.0 cm) HM21L2436E 24 (61.0 cm) HM21L2442E 42 (106.7 cm) 24 (61.0 cm) HM21L2448E 24 (61.0 cm) HM21L2454E 54 (137.2 cm) 24 (61.0 cm) HM21L2460E 60 (152.4 cm) 24 (61.0 cm) HM21L2472E 72 (182.9 cm) 24 (61.0 cm) HM21L2484E 84 (213.4 cm) 24 (61.0 cm) HM21L2496E 96 (243.8 cm) 24 (61.0 cm) HM21L3018E 18 (45.7 cm) 30 (76.2 cm) HM21L3024E 24 (61.0 cm) 30 (76.2 cm) HM21L3030E 30 (76.2 cm) 30 (76.2 cm) HM21L3036E 30 (76.2 cm) HM21L3042E 42 (106.7 cm) 30 (76.2 cm) HM21L3048E 30 (76.2 cm) HM21L3054E 54 (137.2 cm) 30 (76.2 cm) HM21L3055E 55-1/2 (141.0 cm) 30 (76.2 cm) HM21L3060E 60 (152.4 cm) 30 (76.2 cm) HM21L3072E 72 (182.9 cm) 30 (76.2 cm) HM21L3084E 84 (213.4 cm) 30 (76.2 cm) HM21L3096E 96 (243.8 cm) 30 (76.2 cm) Depth Chemical-resistant high-pressure plastic laminate HM21L2418C 18 (45.7 cm) 24 (61.0 cm) HM21L2424C 24 (61.0 cm) 24 (61.0 cm) HM21L2430C 30 (76.2 cm) 24 (61.0 cm) HM21L2436C 24 (61.0 cm) HM21L2442C 42 (106.7 cm) 24 (61.0 cm) HM21L2448C 24 (61.0 cm) HM21L2454C 54 (137.2 cm) 24 (61.0 cm) HM21L2460C 60 (152.4 cm) 24 (61.0 cm) HM21L2472C 72 (182.9 cm) 24 (61.0 cm) HM21L3018C 18 (45.7 cm) 30 (76.2 cm) HM21L3024C 24 (61.0 cm) 30 (76.2 cm) HM21L3030C 30 (76.2 cm) 30 (76.2 cm) HM21L3036C 30 (76.2 cm) HM21L3042C 42 (106.7 cm) 30 (76.2 cm) HM21L3048C 30 (76.2 cm) HM21L3054C 54 (137.2 cm) 30 (76.2 cm) HM21L3055C 55-1/2 (141.0 cm) 30 (76.2 cm) HM21L3060C 60 (152.4 cm) 30 (76.2 cm) HM21L3072C 72 (182.9 cm) 30 (76.2 cm) HM21L3084C 84 (213.4 cm) 30 (76.2 cm) Work Surfaces without Cutouts n 1 (2.54 cm) thick black chemical resistant n Curb must be ordered separately Work Surfaces with Sink Cutout n 1 (2.54 cm) thick black chemical resistant n Sink cutout is 15 x 23 (38.1 x 58.4 cm), fixture hole cutout diameter is 1-3/8 (3.5 cm) n Curb must be ordered separately n Not designed for use with stainless steel sink n Top depth is 30 (76.2 cm) Corner Work Surface with Sink Cutout Epoxy resin work surfaces HM21L3030ES 30 (76.2 cm) HM21L3036ES HM21L3048ES HM21L3054ES 54 (137.2 cm) HM21L3060ES 60 (152.4 cm) n 1 (2.54 cm) thick black chemical resistant n Sink cutout is 14 x 17 (35.6 x 43.2 cm), fixture hole cutout diameter is 1-3/8 (3.5 cm) n Curb must be ordered separately n Not designed for use with stainless steel sink A B Epoxy resin Work surfaces HM21L3040ES 40-1/4 (102.2 cm) 30 (76.2 cm) Work Surfaces with Epoxy Resin Cupsink Cutout n 1 (2.54 cm) thick black chemical resistant n Cutout for HM34L19600 cupsink, fixture hole cutout diameter is 1-3/8 (3.5 cm) n Curb must be ordered separately n Top depth is 30 (76.2 cm) Epoxy resin work surfaces HM21L3036EC HM21L3048EC HM21L3060EC 60 (152.4 cm) Quick Ship and Express Ship Program A B Epoxy resin work surfaces For assemblies without pipe chase HM21L2434E 34-1/4 (87.0 cm) 24 (61.0 cm) Epoxy resin work surfaces For assemblies with pipe chase HM21L3040E 40-1/4 (102.2 cm) 30 (76.2 cm) Chemical-resistant high-pressure Plastic Laminate For assemblies without pipe chase HM21L2434C 34-1/4 (87.0 cm) 24 (61.0 cm) Chemical-resistant high-pressure Plastic Laminate For assemblies with pipe chase HM21L3040C 40-1/4 (102.2 cm) 30 (76.2 cm) Smooth-on n Two-part black Epoxy Resin cement used to join together two Epoxy Resin tops n Can be used to adhere Epoxyn tops to table frames n Covers 32 lineal feet of seams HM-SMOOTH-ON 31

Thermo Scientific Hamilton Work Surfaces and Reagent Racks Curbs for Wall Assemblies, Work Surfaces for Wall/Island Assemblies Curbs for Work Surfaces n 3/4 (1.91 cm) thick x 4 (10.2 cm) high black chemical resistant Length Epoxy resin back curb HM22L0418E 18 (45.7 cm) HM22L0424E 24 (61.0 cm) HM22L0430E 30 (76.2 cm) HM22L0436E 36 (91.5 cm) HM22L0442E 42 (106.7 cm) HM22L0448E HM22L0454E 54 (137.2 cm) HM22L0455E 55-1/2 (141.0 cm) HM22L0460E 60 (152.4 cm) HM22L0472E 72 (182.9 cm) HM22L0484E 84 (213.4 cm) HM22L0496E 96 (243.8 cm) Epoxy resin side curb HM22L0423E 22-3/4 (57.8 cm) HM22L0429E 28-3/4 (73.0 cm) Epoxy resin corner curb HM22L0433E 33-1/2 (85.1 cm) HM22L0434E 34-1/4 (86.1 cm) HM22L0439E 39-1/2 (100.3 cm) HM22L0440E 40-1/4 (102.2 cm) Chemical-resistant high-pressure plastic laminate curb HM22L0424C 24 (61.0 cm) HM22L0430C 30 (76.2 cm) HM22L0436C 36 (91.5 cm) HM22L0442C 42 (106.7 cm) HM22L0448C HM22L0454C 54 (137.2 cm) HM22L0455C 55-1/2 (141.0 cm) HM22L0460C 60 (152.4 cm) HM22L0472C 72 (182.9 cm) HM22L0484C 84 (213.4 cm) Chemical-resistant high-pressure plastic laminate corner curb HM22L0433C 33-7/16 (84.9 cm) HM22L0434C 34-1/4 (86.1 cm) HM22L0439C 39-7/16 (100.2 cm) HM22L0440C 40-1/4 (102.2 cm) Work Surfaces with Sink Cutout for Island Assemblies n 1 (2.54 cm) thick black chemical resistant n Sink cutout is 15 x 23 (38.1 x 58.4 cm), fixture hole cutout diameter is 1-3/8 (3.5 cm) n Not designed for use with stainless steel sink n Top depth is 30 (76.2 cm) Epoxy resin work surfaces HM21L3054ES 54 (137.2 cm) HM21L3060ES 60 (152.4 cm) Work Surface with Cupsink Cutout for Island Assemblies n 1 (2.54 cm) thick black chemical resistant n Cutout for HM34L19600 cupsink, fixture holes cutout diameter is 1-3/8 (3.5 cm) Depth Epoxy resin work surfaces HM21L5424EC 24 (61.0 cm) 54 (137.2 cm) HM21L6024EC 24 (61.0 cm) 60 (152.4 cm) HM21L5430EC 30 (76.2 cm) 54 (137.2 cm) HM21L6030EC 30 (76.2 cm) 60 (152.4 cm) HM21L5436EC 54 (137.2 cm) HM21L6036EC 60 (152.4 cm) Work Surface with Fixture Cutouts for Island Assemblies n 1 (2.54 cm) thick black chemical resistant n Fixture holes cutout diameter is 1-3/8 (3.5 cm) Work Surfaces without Cutouts for Island Assemblies n 1 (2.54 cm) thick black chemical resistant Depth Epoxy resin work surfaces HM21L5436EE 54 (137.2 cm) HM21L6036EE 60 (152.4 cm) Depth Epoxy resin work surfaces HM21L4836E HM21L5430E 30 (76.2 cm) 54 (137.2 cm) HM21L5436E 54 (137.2 cm) HM21L5448E 54 (137.2 cm) HM21L6030E 30 (76.2 cm) 60 (152.4 cm) HM21L6036E 36 (91.5 cm) 60 (152.4 cm) HM21L6048E 60 (152.4 cm) Chemical-resistant high-pressure plastic laminate HM21L3648C 36 (91.5 cm) HM21L3054C 30 (76.2 cm) 54 (137.2 cm) HM21L3654C 36 (91.5 cm) 54 (137.2 cm) HM21L4854C 54 (137.2 cm) HM21L3660C 36 (91.5 cm) 60 (152.4 cm) HM21L4860C 60 (152.4 cm) 32 www.fishersci.com

Thermo Scientific Hamilton Work Surfaces and Reagent Racks Reagent Rack Assemblies for Work Surfaces or Center Tables Elevated Reagent Shelves Upper Shelf n Provide additional storage space on island and peninsula arrangements. 1 (2.54 cm) thick particle board, finished with black plastic laminate. Lengths as shown, can be trimmed to fit in between lengths. Order supports separately see below n Upper shelf has 1 overhang on each side Length Upper Shelf HM24L21500 12 (30.5 cm) HM24L21600 12 (30.5 cm) Lower Shelf Lower Shelf HM24L22800 26 (66.0 cm) 12 (30.5 cm) HM24L22200 28 (71.1 cm) 12 (30.5 cm) HM24L22300 32 (81.3 cm) 12 (30.5 cm) HM24L22100 34 (86.4 cm) 12 (30.5 cm) HM24L22900 38 (96.5 cm) 12 (30.5 cm) HM24L22400 40 (101.6 cm) 12 (30.5 cm) HM24L22500 44 (111.8 cm) 12 (30.5 cm) HM24L22600 46 (116.8 cm) 12 (30.5 cm) Support Columns for Elevated Reagent Shelves End Support Center Shelf Support Columns n Powder coated steel construction. 11-1/2 (29.2 cm) deep, 22-3/4 (57.8 cm) high n Center shelf supports include holes and shelf brackets on both sides of the support for use with lower shelves Center Support End Support HM24L17100 2 (5.08 cm) End Shelf Support Column n Powder coated steel construction 11-1/2 (29.2 cm) deep, 22-3/4 (57.8 cm) high n End supports include holes and shelf brackets on one side only for use with lower shelves HM24L08500 HM24L08400 2 (5.08 cm) 6 (15.2 cm) Quick Ship and Express Ship Program 33

Thermo Scientific Hamilton Sinks and Service Fixtures Sinks and Components Epoxy Resin Sinks HM52L44100 HM52L77800 Corner sink HM52L44200 n One-piece black lab sink for use with Epoxy Resin work tops n High resistance to acids, solvents and salts n Highly non-absorbent n Coved corners, sides and bottom n Order outlet separately, see below Inside Dimensions 24 x 16 x 8 (61.0 x 40.6 x 20.3 cm) 24 x 16 x 12 (61.0 x 40.6 x 30.5 cm) 18 x 15 x 8 (45.7 x 38.1 x 20.3 cm) Stainless Steel Sinks n One-piece single compartment drop- In self-rimming ledge style lab sink for use with chemical resistant high pressure plastic laminate work tops n 4-1/2 (11.4 cm) integral back ledge to accommodate deck-mounted fixtures n Polished interior and top surfaces and sound deadened; cutouts for drain and center fixture only n Standard dimension from edge of work surface to sink edge is 2 (5.1 cm) Epoxy Resin Sink Outlet n NPSM threads n 5-hole integral resin strainer Diameter A B C D E HM52L44300 1-1/2 3-3/8 1-7/16 1/4 1/8 2-5/8 (3.81 cm) (8.57 cm) (3.65 cm) (.64 cm) (.32 cm) (6.67 cm) Side Front Depth A B HM52L933L0 14 16 10-1/2 7 8 (35.6 cm) (40.6 cm) (26.7 cm) (17.8 cm) (20.3 cm) HM52L939L0 16 22 10-1/2 8 11 (40.6 cm) (55.9 cm) (26.7 cm) (20.3 cm) (27.9 cm) Stainless Steel Sink Outlet Polyolefin Sink Outlet n 1-1/2 (3.81 cm) sink outlet with strainer n 1-1/2 (3.81 cm) outlet with basket strainer and 1-1/2 (3.81 cm) tailpiece n Overall dimensions: 4-3/8 (11.1 cm) diameter and 6-5/8 (16.8 cm) height HM34L01800 Diameter A B C D HM52L44400 1-1/2 3-3/8 1-3/4 1/8 3-5/8 (3.81 cm) (8.57 cm) (4.45 cm) (.32 cm) (9.21 cm) Polyolefin Sink Trap n P style trap with 1-1/2 (3.81 cm) outlet Polyolefin Overflow n 1-1/2 (3.81 cm) outlet n Not compatible with the epoxy resin outlet HM34L24200 Height 6 (15.2 cm) Epoxy Resin Oval Cupsink n Oval cupsink with 1-1/2 (3.81 cm) outlet and 8-1/8 (20.6 cm) overall height Diameter HM34L19600 7-1/2 x 4-1/2 (19.1 x 11.4 cm) A B C D HM34L22400 3-5/8 6 5-3/16 4-7/8 2-1/2 (9.2 15.2 cm) (13.2 cm) (12.4 cm) (6.4 cm) 34 www.fishersci.com

Thermo Scientific Hamilton Sinks and Service Fixtures Deck-mounted Service Fixtures Deck-Mounted Water Service Fixtures n Forged brass body with chrome-plated finish n Forged brass four-arm handle with plastic color-coded index disc n Renewable unit with stainless steel seat and special high durometer bibb washer, serrations for position locking in valve body Single Service Water Faucets n 3/8 (.97 cm) IPS mounting shank with locknut and washer n 6 (15.2 cm) spread rigid gooseneck with serrated tip HM32W38500 HM32W38600 HM32W38700 Control Location Center Right Left n 3/8 (.97 cm) IPS mounting shank with locknut and washer n 6 (15.2 cm) spread rigid gooseneck with serrated tip HM32W39100 HM32W39200 HM32W39300 Faucets for Distilled/Deionized Service Control Location Center Right Left n Brass body with tin-lined interior n Self-closing control n 1/2 (1.27 cm) IPS inlet with coupling nut for connection to tailpiece, compression fittings n 6 (15.2 cm) spread rigid gooseneck Hot and Cold Water Mixing Faucets n 6 (15.2 cm) spread rigid gooseneck with serrated tip n 1-3/16 (3.02 cm) IPS mounting shank with locknut and washer, requires 1-3/8 mounting hole n 3/8 O.D. flexible copper tubing for connection to hot and cold water HM32W40500 n 6 (15.2 cm) spread rigid gooseneck with serrated tip n Integral vacuum breaker of forged brass n 1-3/16 (3.02 cm) IPS mounting shank with locknut and washer, requires 1-3/8 mounting hole n 3/8 O.D. flexible copper tubing for connection to hot and cold water HM32W40600 n 9 (22.9 cm) spread swing spout and aerator n 1-3/16 (3.02 cm) IPS mounting shank with locknut and washer, requires 1-3/8 mounting hole n 3/8 (.955 cm) O.D. flexible copper tubing for connection to hot and cold water HM32W40700 HM32W51400 n All PVC construction n Manual control with white nylon four-arm handle n Includes 1/2 (1.27 cm) IPS PVC mounting shank n 6 (15.2 cm) spread rigid gooseneck HM32L51300 Quick Ship and Express Ship Program 35

Thermo Scientific Hamilton Sinks and Service Fixtures Fixtures for Gas, Air and Vacuum and Electrical Fixtures Deck-mounted Gas, Air and Vacuum Fixtures for Burner Service Only n Brass body with chrome-plated finish n Tapered inserts are individually lapped and fitted n Insert and handle of one-piece construction with high viscosity lubricant and stainless steel roll-pin handle stop n Color-coded screw-on raised index buttons to indicate service n Spring-loaded nut at bottom of fixture n Furnished with connecting nipple, nut and washer; requires a 3/4 (1.91 cm) diameter hole for mounting Turret with One Ground Key Valve n For working pressures up to 40 PSI n 3/8 (.955 cm) NPT female inlet thread recessed 1-5/16 (3.3 cm) into turret base n Furnished with 3/8 (.955 cm) mounting shank HM30L53500 Electrical Fixtures n UL Listed n H0 suffix indicates Hospital Grade Pedestal Type Electrical Fixtures n Polarized 3-wire grounding type 120V, 20 AMP, NEMA 5-20R n Flush plates are chrome plated and receptacle color is Ivory n Receptacle type: HM36L22400 HM36L224H0 HM36L22500 HM36L225H0 HM36L22600 HM36L226H0 HM36L22700 HM36L227H0 Type Single-faced Single-faced Double-faced Double-faced 2-gang single-faced 2-gang single-faced 2-gang double-faced 2-gang double-faced Turret with Two Ground Key Valves n Cocks positioned at 180 degrees n For working pressures up to 40 PSI n 3/8 (.955 cm) NPT female inlet thread recessed 1-5/16 (3.3 cm) into turret base n Furnished with 3/8 (.955 cm) mounting shank Toggle Switch n Single-pole type 120V, 20 AMP n Switch and flush plate is black color HM36L21100 HM30L53800 n Cocks positioned at 90 degrees n For working pressures up to 40 PSI n 3/8 (.955 cm) NPT female inlet thread recessed 1-5/16 (3.3 cm) into turret base n Furnished with 3/8 (.955 cm) mounting shank HM30L54100 Pre-wired Electric Power Strips 15 AMP n Pre-wired power strip of white extruded aluminum with black receptacles and built-in circuit protection with reset switch n Available in lengths of 3' (91.4 cm) with 6 plug-ins n Rated at 15 AMPS 125 VAC or 20 AMPS 125 VAC with 6-foot long SJT cord n UL Approved Turret with Four Ground Key Valves n Cocks positioned at 90 degrees 20 AMP HM900H0280 HM900H0200 AMP Rating 15 AMP 20 AMP n For working pressures up to 40 PSI n 3/8 (.955 cm) NPT female inlet thread recessed 1-5/16 (3.3 cm) into turret base n Furnished with 3/8 (.955 cm) mounting shank HM30L54700 36 www.fishersci.com

Thermo Scientific Hamilton Sinks and Service Fixtures Safety Equipment and Laboratory Pegboards Safety Equipment n Removable plastic cover, reticulated polyurethane filter and built-in volume control on each outlet head n Polished chrome-plated outlet heads n Multi-angled water stream n Furnished with hinged plastic dust cover attached to outlet head n Meets ANSI Z358.1 requirements Glassware Pegboard n Suitable for holding a wide variety of glassware n Cold, heat, chemical, moisture and impact resistant pegs and board n 1 (2.54 cm) thick black epoxy resin pegboard Hand-held Drench Hose Deck Mount n Aerated outlet head with rubber eye guard n Self-closing valve operated by squeeze handle n Reinforced high pressure PVC hose 8' (243.8 cm) long n Deck flange for vertical mounting in work surface n 3/8 (.97 cm) diameter IPS male inlet HM32L38300 Number of Pegs 5 6-1/2 8 Board Size x Height (12.7 cm) (16.5 cm) (20.3 cm) Pegboard without finished back HM52L86300 24 x 30 (61.0 x 76.2 cm) 17 14 7 HM52L86400 30 x 30 (76.2 x 76.2 cm) 23 19 9 Replacement pegs sold separately HM52L78400 Double stud peg 5 (12.7 cm) long HM52L78500 Double stud peg 6-1/2 (16.5 cm) long HM52L78600 Double stud peg 8 (20.3 cm) long Eye Wash Deck Mount n Two soft-stream outlet heads n Unit swivels 90 degrees from storage position n 1/2 (1.27 cm) IPS stay-open ball valve operated by flag handle n 1/2 (1.27 cm) diameter IPS male inlet Drip Stop Trough for Pegboard n For use with pegboard above n Stainless steel construction n Drain located at right end Floor-mounted Safety Station Inlet 66 (167.6 cm) HM32L53900 n Floor-mounted combination eye wash and safety shower n Furnished with aluminum floor flange and galvanized intermediate pipe and fittings n Two soft-stream outlet heads, stainless steel bowl and stayopen valve on eye wash n High visibility orange ABS plastic shower head with stay-open valve operates until handle is pushed up n 1/2 (1.27 cm) IPS stay-open ball valve operated by flag handle n 1-1/4 (3.2 cm) diameter IPS female outlet Board Size Depth HM52L84300 24 (61.0 cm) 2 (5.08 cm) HM52L54300 24 (61.0 cm) 5 (12.7 cm) HM52L84400 30 (76.2 cm) 2 (5.08 cm) HM52L54400 30 (76.2 cm) 5 (12.7 cm) Outlet 8 (20.3 cm) HM32L53300 Quick Ship and Express Ship Program 37

Thermo Scientific Hamilton Fume Hoods Superstructures SafeAire II Bypass Superstructure For Use With Constant Volume Exhaust Systems n Designed for installation on 30 (76.2 cm) to deep work surface n Incorporates double bypass to maintain constant exhaust volume at all sash positions n Designed to permit exact balancing of room ventilation system with fume hood exhaust volume n Field-convertible to Restricted Bypass type fume hood n Vertical sash is full-view, laminated safety glass with full-width recessed pull n 28-1/2 (72.4 cm) high opening for set-up n Two-tube (T-8) fluorescent light fixture, black light switch and flush plate, and two black duplex 120 VAC receptacles and flush plates n 96 (243.9 cm) wide units have two light fixtures n Plugged holes for future service fixture installation standard on both posts Specify fixtures from page 48 n Remote baffle adjustment n Shipped assembled n Installation required n Not pre-wired or pre-piped n See page 46-47 for work surfaces Required Recommended Transition Blower* HM54L2591P0B HM54L90200 HM55L76100 HM54L2594P0B 60 (152.4 cm) HM54L90300 HM55L76900 HM54L2597P0B 72 (182.9 cm) HM54L90300 HM55L76900 HM54L2600P0B 96 (242.9 cm) HM54L90400 HM55L81300 * Blowers sized for system with approximately 35 feet (1006.8 cm) of straight duct with one 90 degree elbow 100 FPM Face Velocity. Exhaust Volumes 100 FPM 100 FPM at 28-1/2 (72.4 cm)* at 18 (45.7 cm)* Sash Opening Sash Opening Fume Hood Size Collar Size CFM SP CFM SP 48 6 x 15 760.18 485.09 (121.9 cm) (15.2 x 38.1 cm) 60 6 x 23 1000.18 660.09 (152.4 cm) (15.2 x 58.4 cm) 72 6 x 23 1250.27 785.13 (182.9 cm) (15.2 x 58.4 cm) 96 6 x 30 1710.26 1081.09 (243.9 cm) (15.2 x 76.2 cm) * 28-1/2 (72.4 cm) openings are for set-up only; operating position is an 18 (45.7 cm) opening. The following fume hoods are available at STANDARD lead times. Comments WB54L2591P0B Two service fixtures pre-plumbed; two outlets and light pre-wired WB54L2594P0B 60 (152.4 cm) Two service fixtures pre-plumbed; two outlets and light pre-wired WB54L2597P0B 72 (182.9 cm) Two service fixtures pre-plumbed; two outlets and light pre-wired WB54L2600P0B 96 (243.8 cm) Two service fixtures pre-plumbed; two outlets and light pre-wired WF54L2591P0B Two service fixtures pre-plumbed; light pre-wired, no outlets WF54L2594P0B 60 (152.4 cm) Two service fixtures pre-plumbed; light pre-wired, no outlets WF54L2597P0B 72 (182.9 cm) Two service fixtures pre-plumbed; light pre-wired, no outlets WF54L2598P0B 96 (243.8 cm) Two service fixtures pre-plumbed; light pre-wired, no outlets WN54L2594P0B 60 (152.4 cm) Hood only no fixtures; no electrical outlets WN54L2597P0B 72 (182.9 cm) Hood only no fixtures; no electrical outlets 38 UL 1805 Classified 60-3/4 (154.3 cm) 54-1/4 (137.8 cm) Depth 31-1/4 (79.4 cm) End View www.fishersci.com

Thermo Scientific Hamilton Fume Hoods Superstructures SafeAire II Perchloric Acid Restricted Bypass Superstructure For Use With Constant Volume or Variable Air Volume Exhaust Systems n Designed specifically and exclusively for perchloric acid procedures to minimize possibility of fire and explosion n One-piece type 304 stainless steel interior and dished work surface, with all joints coved, welded and ground n Optional type 316 stainless steel interior with integral work surface for high-abuse applications (special order extended leadtime) n Integral full-width trough at back of work surface for collection and disposal of wash-down waters; double drain for large volumes n High-volume spray heads behind upper baffle n Vertical sash is full-view, laminated safety glass with full-width recessed pull n 28-1/2 (65.5 cm) high opening for set-up n One each remote control cold water faucet with vacuum breaker and control valve for fume hood washdown (additional valves are required for duct washdown) n Two each 120 VAC black duplex receptacles and flush plates n One vapor-proof light with black switch and flush plate on wide fume hoods; two vapor-proof lights with one black switch and flush plate on 72 (182.9 cm) wide fume hoods n Does not include sidewall access panel n Baffles are non-adjustable n Installation required n Not pre-wired or pre-piped Required Recommended Transition Blower* HM54L2793K0B HM54L90200 HM55L761SR** HM54L2797K0B 72 (182.9 cm) HM54L90300 HM55L813SR** ** Blowers sized for system with approximately 35 feet (10.67 meters) of straight duct with one 90 degree elbow 100 FPM Face Velocity. ** Spark-resistant blowers are available at extended lead times. Please call for current availability. Exhaust Volumes 100 FPM 100 FPM at 28-1/2 (72.4 cm)* at 18 (45.7 cm)* Sash Opening Sash Opening Fume Hood Size Collar Size CFM SP CFM SP 6 x 15 (15.2 x 38.1 cm) 760.18 485.09 72 (182.9 cm) 6 x 23 (15.2 x 58.4 cm) 1250.27 785.13 UL 1805 Classified 60-3/4 (154.3 cm) 54-1/4 (137.8 cm) 31-1/4 (79.4 cm) End View Available to ship in 15 working days * 28-1/2 (72.4 cm) openings are for set-up only; operating position is an 18 (45.7 cm) opening. The following fume hoods are available at STANDARD lead times. Comments WB54L2793K0B Two pre-wired outlets and light; includes two attached fixtures (gas and air) WB54L2797K0B 72 (182.9 cm) Two pre-wired outlets and light; includes two attached fixtures (gas and air) Quick Ship and Express Ship Program 39

Thermo Scientific Hamilton Fume Hoods Superstructures SafeAire II Radioisotope Bypass Superstructure For Use With Constant Volume Exhaust Systems n Designed for handling of radioactive isotopes n One-piece type 304 stainless steel interior and work surface with integral cupsink located at left front corner, all corners coved, welded and ground (Relocating cupsink extends leadtime) n Weight capacity of reinforced work surface is 200 lbs. per square foot n Incorporates double bypass to maintain constant exhaust volume at all sash positions n Designed to permit exact balancing of room ventilation system with fume hood exhaust volume n Vertical sash is full-view, laminated safety glass with full-width recessed pull n 28-1/2 (72.4 cm) high opening for set-up n Does not include sidewall access panel n Two-tube (T-8) fluorescent light fixture, black light switch and flush plate, two 120 VAC black duplex receptacles and flush plates n 96 (243.8 cm) wide units have two light fixtures n Plugged holes for future service fixture installation standard on both posts (fixtures shipped loose) n Installation required n Not pre-wired or pre-piped n Remote baffle adjustment Required Recommended Transition Blower* HM54L2735K0B HM54L90200 HM55L76100 HM54L2738K0B 60 (152.4 cm) HM54L90300 HM55L76900 HM54L2741K0B 72 (182.9 cm) HM54L90300 HM55L76900 * Blowers sized for system with approximately 35 feet (10.67 meters) of straight duct with one 90 degree elbow 100 FPM Face Velocity. UL 1805 Classified 60-3/4 (154.3 cm) 54-1/4 (137.8 cm) End View 31-1/4 (79.4 cm) 100 FPM 100 FPM Exhaust Volumes at 28-1/2 (72.4 cm)* at 18 (45.7 cm)* Sash Opening Sash Opening Fume Hood Size Collar Size CFM SP CFM SP 6 x 15 (15.2 x 38.1 cm) 760.18 485.09 60 (152.4 cm) 6 x 23 (15.2 x 58.4 cm) 1000.18 660.09 72 (182.9 cm) 6 x 23 (15.2 x 58.4 cm) 1250.27 785.13 Available to ship in 15 working days * 28-1/2 (72.4 cm) openings are for set-up only; operating position is an 18 (45.7 cm) opening. The following fume hoods are available at STANDARD lead times. Comments WB54L2735K0B Two attached service fixtures; two outlets and light pre-wired WB54L2738K0B 60 (152.4 cm) Two pre-wired outlets and light; includes two attached fixtures (gas and air) WB54L2739K0B 72 (182.9 cm) Two pre-wired outlets and light; includes two attached fixtures (gas and air) 40 www.fishersci.com

Thermo Scientific Hamilton Fume Hoods Superstructures Concept Fume Hood Superstructure n 35 (88.9 cm) sash viewing height viewable face opening is a full 35 (88.9 cm) high for optimum visibility of fume hood interior n Combine with work surface and fume hood base cabinet to make a custom assembly for base cabinets. See pages 13 n AutoSash automatic sash positioning system sash locks in set-up position and automatically returns to maximum operational height of 18 (45.7 cm) when lock is released n Frameless vertical rising sash is standard n Low profile sill airfoil the top surface of the airfoil is flush with the work surface for obstruction-free access to fume hood interior n Chain and sprocket sash counterbalance system features alignment shaft and sash leveling system n Preset fixed baffle system no adjustment required factory tuned for optimal airflow characteristics n Designed for 60-100 feet per minute face velocities n Downdraft bypass improves airflow through bypass area with increased volume and less resistance for quieter operation n White polyresin asbestos-free lining side wall access panels with PVC gasket n Two-tube fluorescent light fixture, light switch, and two duplex 120 volt electrical receptacles n Plugged holes for future fixture installation on both posts, services optional specify fixtures from page 48 n See page 46-47 for work surfaces n Not pre-wired or pre-piped UL 1805 Classified 63-1/2 (161.3 cm) 53 (134.6 cm) 31-1/4 (79.4 cm) End View Quick Ship and Express Ship Program 41

Thermo Scientific Hamilton Fume Hoods Superstructures Concept Fume Hood Superstructure (Continued) Bypass Vertical Rising Unframed Sash 31-1/4 (79.4 cm) Depth HM54L2570P0B HM54L2571P0B 60 (152.4 cm) HM54L2572P0B 72 (182.9 cm) HM54L2573P0B 84 (213.4 cm) HM54L2574P0B 96 (243.8 cm) 60 FPM Face Velocity 100 FPM Face Velocity Exhaust Volumes at 28-1/2 (72.4 cm)* at 18 (45.7 cm)* Sash Opening Sash Opening Fume Hood Size Collar Size CFM SP CFM SP 6 x 15 (15.2 x 38.1 cm) 484.09 484.09 60 (152.4 cm) 6 x 23 (15.2 x 58.4 cm) 634.09 634.09 72 (182.9 cm) 6 x 23 (15.2 x 58.4 cm) 784.13 784.13 84 (213.4 cm) 6 x 26 (15.2 x 66.0 cm) 934.15 934.15 96 (243.8 cm) 6 x 30 (15.2 x 76.2 cm) 1084.09 1084.09 * 28-1/2 (72.4 cm) openings are for set-up only; operating position is an 18 (45.7 cm) opening. The following fume hoods are available at STANDARD lead times. Comments WB54L2570P0B Two service fixtures pre-plumbed; two outlets and light pre-wired WB54L2571P0B 60 (152.4 cm) Two service fixtures pre-plumbed; two outlets and light pre-wired WB54L2572P0B 72 (182.9 cm) Two service fixtures pre-plumbed; two outlets and light pre-wired WB54L2573P0B 84 (213.4 cm) Two service fixtures pre-plumbed; two outlets and light pre-wired WB54L2574P0B 96 (243.8 cm) Two service fixtures pre-plumbed; two outlets and light pre-wired WF54L2570P0B Two service fixtures pre-plumbed; light pre-wired, no outlets WF54L2571P0B 60 (152.4 cm) Two service fixtures pre-plumbed; light pre-wired, no outlets WF54L2572P0B 72 (182.9 cm) Two service fixtures pre-plumbed; light pre-wired, no outlets WF54L2573P0B 84 (213.4 cm) Two service fixtures pre-plumbed; light pre-wired, no outlets WF54L2574P0B 96 (243.8 cm) Two service fixtures pre-plumbed; light pre-wired, no outlets WN54L2570P0B Hood only no fixtures; no electrical outlets WN54L2571P0B 60 (152.4 cm) Hood only no fixtures; no electrical outlets WN54L2572P0B 72 (182.9 cm) Hood only no fixtures; no electrical outlets WN54L2573P0B 84 (213.4 cm) Hood only no fixtures; no electrical outlets WN54L2574P0B 96 (243.8 cm) Hood only no fixtures; no electrical outlets 42 www.fishersci.com

Thermo Scientific Hamilton Fume Hoods Superstructures PaceAire Fume Hood Superstructure For Use With Constant Volume Exhaust Systems n Designed for small working spaces and small budgets; ideally suited to schools, hospitals, clinics and small industrial laboratories n Compact, lightweight, yet sturdy and efficient n Constant volume/bypass exhaust system n Light-duty fume fume hood; not for highly corrosive environments n Two-speed integral blower provides operation at lower mode to conserve energy; also allows face velocity to be coordinated with a wider range of duct conditions n Constructed of 18 gauge steel, double-walled and reinforced, yet light enough for easy installation n Compact size fits on any standard laboratory bench top, yet provides large interior work area n Full-view vertically rising sash made of 7/32 (.64 cm) laminated safety glass with full-width recessed pull n 28-1/2 (72.4 cm) high opening for set-up n Fixed baffle position n Liner and interior finish made of steel with gloss white finish n Does not include sidewall access panel n Vapor-proof light fixture and light switch n wide UL 1805 Classified HM54L51300B HM54L51200B Description With blower Without blower Blower Specifications Exhaust outlet 5-1/4 (13.3 cm) x 8-3/8 (21.3 cm) Speed low: 1140 RPM; High: 1725 RPM Horsepower low: 1/8; High: 1/4 Electrical 115 VAC, 60 Hz 100 FPM Exhaust Volume at 28-1/2 (72.4 cm)* Sash Opening Fume Hood Size Collar Size CFM SP 8 (20.3 cm) diameter 657.28 * 28-1/2 (72.4 cm) openings are for set-up only; operating position is an 18 (45.7 cm) opening 23-3/4 (60.3 cm) 7-5/16 (18.6 cm) 8 diameter (20.3 cm) 36 (91.4 cm) 8-1/8 (20.6 cm) 16-3/4 (42.6 cm) Top View 8-1/4 (21 cm) 5-1/4 (13.3 cm) 7-1/4 (18.4 cm) 8-3/8 (21.3 cm) 7-5/16 (18.6 cm) 53 (134.6 cm) 28-1/2 (72.4 cm) 32-5/8 (82.9 cm) 41 (104.1 cm) 18-1/2 (47 cm) 33 (83.8 cm) 36 (91.4 cm) Front View 23-3/4 (60.3 cm) End View Quick Ship and Express Ship Program 43

Thermo Scientific Hamilton Fume Hoods Floor-mounted Constant Volume/Bypass Floor-mounted Fume Hood Assembly n Designed for large and complex laboratory apparatus set-ups and roll-in equipment n Incorporates double bypass to maintain constant exhaust volume at all sash positions n Designed to permit exact balancing of room ventilation system with fume hood exhaust volume n Field-convertible to Restricted Bypass or Auxiliary Air type fume hood n Double-hung, vertical sash is full-view, laminated safety glass with full-width recessed pulls n Sashes raise completely for easy set-up (66-1/2 (168.9 cm) sash opening) n Two side-wall access panels with PVC gasket on left side, one on right n One cupsink and two side-wall access panels with PVC gasket included at front left location 96 (243.8 cm) wide fume hood has one cupsink and two access panels at each side; specify additional services required from page 47 n Two-tube fluorescent light fixture, light switch and two duplex 120 VAC receptacles n 96 (243.8 cm) wide units have two light fixtures n Standard depth is 32-11/32 (82.2 cm) n Plugged holes for future service fixture installation standard on both posts - Specify services from page 48 n Liner material is white polyresin n Standard without floor n Shipped knocked-down and requires extensive job-site assembly installation by a certified Thermo Fisher Scientific installer is highly recommended n Not pre-wired or pre-piped Required Recommended Transition Blower* HM554S707PB HM54L90200 HM55L76100 HM554S710PB 60 (152.4 cm) HM54L90300 HM55L76900 HM554S713PB 72 (182.9 cm) HM54L90300 HM55L76900 HM554S716PB 96 (243.8 cm) HM54L90400 HM55L81300 * Blowers sized for system with approximately 35 feet (10.67 meters) of duct with one 90 degree elbow 100 FPM face velocity. Exhaust Volume 100 FPM at 31-1/2 (80.0 cm)* Sash Opening Fume Hood Size Collar Size CFM SP 6 x 15 (15.2 x 38.1 cm) 850.18 60 (152.4 cm) 6 x 23 (15.2 x 58.4 cm) 1110.20 72 (182.9 cm) 6 x 23 (15.2 x 58.4 cm) 1380.32 96 (243.8 cm) 6 x 30 (15.2 x 76.2 cm) 1900.29 * Floor-mounted fume hoods should be operated through a maximum face opening of 18 (45.7 cm) through a single sash with the other sash closed. Shipped knocked down and requires extensive jobsite assembly. Installation by a certified Thermo Fisher Scientific installer is highly recommended. UL 1805 Classified 100-11/16 (255.7 cm) 90 (228.6 cm) 32-11/32 (82.2 cm) End View The following fume hoods are available at STANDARD lead times. Description Comments WF554S2707P0B With vertical rising sash Two pre-wired outlets and light; includes two attached fixtures (gas and cold water) WF554S2710P0B 60 (152.4 cm) With vertical rising sash Two pre-wired outlets and light; includes two attached fixtures (gas and cold water) WF554S2713P0B 72 (182.9 cm) With vertical rising sash Two pre-wired outlets and light; includes two attached fixtures (gas and cold water) WF554S2716P0B 96 (243.8 cm) With vertical rising sash Two pre-wired outlets and light; includes two attached fixtures (gas and cold water) WF554S2707PSB With horizontal rising sash Two pre-wired outlets and light; includes two attached fixtures (gas and cold water) WF554S2710PSB 60 (152.4 cm) With horizontal rising sash Two pre-wired outlets and light; includes two attached fixtures (gas and cold water) WF554S2713PSB 72 (182.9 cm) With horizontal rising sash Two pre-wired outlets and light; includes two attached fixtures (gas and cold water) WF554S2716PSB 96 (243.8 cm) With horizontal rising sash Two pre-wired outlets and light; includes two attached fixtures (gas and cold water) 44 www.fishersci.com

Thermo Scientific Hamilton Fume Hoods Bench-top Dimensions Service and Vent Roughing-in Restricted Bypass and Constant Volume Bypass AC 4 115V 8 5 19 8 5 4 AC 115V 31 4 W G A V CW 5-5/16 4 5-5/16 W G V CW A 6 x 15 31-1/4 24 Fume Vent (79.3 cm) (60.9 cm) 30 (76.2 cm) 6 x 23 Fume Vent 31-1/4 (79.3 cm) 4 8 5 48 (121.9) cm 4 W G V CW A 8 5 36 (91.4 cm) 4 AC 115V 72 (182.8 cm) 43 5-5/16 6 x 23 Fume Vent 55 31-1/4 (79.3 cm) 8 5 4 60 (152.4 cm) The top of the fume hood exhaust vent is located 88-1/4 (224.2 cm) above finished floor with steel base cabinet. Duct connection should overlap the vent by a maximum of 1-1/4 (3.18 cm). Dimensions shown are nominal, some variations may occur in manufacturing and installation. Symbols: CW = Cold Water HW = Hot Water G = Gas A = Air V = Vacuum W = Waste AC = Electric 115V or 230V 59 8 4 W CW G A V 42 (106.6 cm) AC 115V 5-5/16 6 x 26 Fume Vent 31-1/4 Concept 37-1/4 Concept and Pioneer 43-1/4 Concept 4 W G V CW A 48 (121.9 cm) 5-5/16 AC 115V 6 x 30 Fume Vent W 31-1/4 (79.3 cm) 84 (213.3 cm) 96 (243.8 cm) Fume Hood Dimensions Typical Front Views A Superstructure Floor-mounted Fume Hood Size A B A B 4-13/16 (12.2 cm) B 4-13/16 (12.2 cm) 90 38-3/8 (97.5 cm) 38-3/8 (97.5 cm) 60 (152.4 cm) 60 (152.4 cm) 50-3/8 (128.0 cm) 60 (152.4 cm) 50-3/8 (128.0 cm) 72 (182.9 cm) 72 (182.9 cm) 62-3/8 (158.4 cm) 72 (182.9 cm) 62-3/8 (158.4 cm) 96 (243.8 cm) 96 (243.8 cm) 86-3/8 (219.4 cm) 96 (243.8 cm) 86-3/8 (219.4 cm) Superstructures 4-13/16 (12.2 cm) B A Floor-mounted 4-13/16 (12.2 cm) Quick Ship and Express Ship Program 45

Thermo Scientific Hamilton Fume Hoods Work Surfaces Epoxy Resin n Black finish n Requires shallow cupsink HM34L13700 n 1-1/4 (3.18 cm) thick n Cutout only included, cupsinks must be ordered separately n Piping pass-through cutouts are symmetrical n Without cupsink cutout n Corresponds to fume hood depth of 31-1/4 (79.4 cm) HM21L4826000 HM21L6026000 HM21L7226000 HM21L8426000 HM21L9626000 60 (152.4 cm) 72 (182.9 cm) 84 (213.4 cm) 96 (243.8 cm) n To be used with a sink base unit and with cupsink model HM34L19600 n With right rear cupsink cutout n Corresponds to fume hood depth of 31-1/4 (79.4 cm) HM21L48261RR HM21L60261RR HM21L72261RR HM21L84261RR HM21L96261RR 60 (152.4 cm) 72 (182.9 cm) 84 (213.4 cm) 96 (243.8 cm) n Vent hole-only tops (vent on right) HM21L4826000V HM21L6026000V 60 (152.4 cm) HM21L7226000V 72 (182.9 cm) HM21L8426000V 84 (213.4 cm) HM21L9626000V 96 (243.8 cm) n To be used with a sink base unit and with cupsink model HM34L19600 n With left rear cupsink cutout and rear vent hole cutout (96 model has 2 cupsink cutouts n Corresponds to SafeAire II fume hood depth of 31-1/4 (79.4 cm) n Also available as right rear with vent. Replace LRV with RRV HM21L48261LRV HM21L60261LRV HM21L72261LRV HM21L84261LRV 60 (152.4 cm) 72 (182.9 cm) 84 (213.4 cm) n To be used with a sink base unit and with cupsink model HM34L19600 n With left rear cupsink cutout n Corresponds to fume hood depth of 31-1/4 (79.4 cm) n To be used with a sink base unit and with cupsink model HM34L19600 n With 2 rear cupsink cutouts and rear hole cutout n Corresponds to SafeAire II fume hood depth of 31-1/4 (79.4 cm) HM21L96262BRV 96 (243.8 cm) HM21L48261LR HM21L60261LR HM21L72261LR HM21L84261LR HM21L96261LR 60 (152.4 cm) 72 (182.9 cm) 84 (213.4 cm) 96 (243.8 cm) 46 www.fishersci.com

Thermo Scientific Hamilton Fume Hoods Work Surfaces Epoxy Resin (continued) n Black finish n Requires shallow cupsink HM34L13700 n 1-1/4 (3.18 cm) thick n Cutout only included, cupsinks must be ordered separately n Piping pass-through cutouts are symmetrical n With right front cupsink cutout n Corresponds to fume hood depth of 31-1/4 (79.4 cm) HM21L48261RF HM21L60261RF HM21L72261RF HM21L84261RF HM21L96261RF 60 (152.4 cm) 72 (182.9 cm) 84 (213.4 cm) 96 (243.8 cm) n With left front cupsink cutout and rear vent hole cut out (96 model has 2 cup sink cutouts) Option n Corresponds to fume hood depth of 31-1/4 (79.4 cm) HM21L48261LFV HM21L60261LFV HM21L72261LFV HM21L84261LFV HM21L96261LFV 60 (152.4 cm) 72 (182.9 cm) 84 (213.4 cm) 96 (243.8 cm) n With 2 front cupsink cutouts and rear vent hole cut out n Corresponds to fume hood depth of 31-1/4 (79.4 cm) n With two front cupsink cutouts n Corresponds to fume hood depth of 31-1/4 (79.4 cm) HM21L96262BFV 96 (243.8 cm) HM21L96262BF 96 (243.8 cm) n With left front cupsink cutout n Corresponds to fume hood depth of 31-1/4 (79.4 cm) HM21L48261LF HM21L60261LF HM21L72261LF HM21L84261LF HM21L96261LF 60 (152.4 cm) 72 (182.9 cm) 84 (213.4 cm) 96 (243.8 cm) Quick Ship and Express Ship Program 47

Thermo Scientific Hamilton Fume Hoods Service Fixtures Remote Control Single Service Fixtures Epoxy Resin Oval Cupsink Front-mounted shown, rear-mounted has turret 2 (5.08 cm) lower than valve n Fixtures have forged brass valve body and outlet; parts exposed in fume hood have acid and solvent resistant black plastic finish n Removable serrated tip n Flat mounting flange for wall mount n 1 (2.54 cm) mounting hole n Oval cupsink with 1-1/2 (3.81 cm) outlet and 8-1/8 (20.6 cm) overall height Diameter HM34L19600 7-1/2 x 4-1/2 (19.1 x 11.4 cm) Outlet PSI Location Type of Service Bypass, Constant Volume Superstructure HM32L55200 60 (152.4 cm) Front Cold Water HM32L59600 60 (152.4 cm) Rear Cold Water HM32L57700 60 (152.4 cm) Front Distilled Water HM32L63000 20 (50.8 cm) Front Steam HM30L497GW 80 (203.2 cm) Front Gas HM30L497AW 80 (203.2 cm) Front Air HM30L497VW 80 (203.2 cm) Front Vacuum HM30L57400 80 (203.2 cm) Front Nitrogen HM30L57800 80 (203.2 cm) Front Oxygen Bypass, Constant Volume Walk-in Fume Hood HM32L55400 60 (152.4 cm) Front Cold Water HM32L59700 60 (152.4 cm) Rear Cold Water HM32L57900 60 (152.4 cm) Front Distilled Water HM32L63100 20 (50.8 cm) Front Steam HM30L499GW 80 (203.2 cm) Front Gas HM30L499AW 80 (203.2 cm) Front Air HM30L499VW 80 (203.2 cm) Front Vacuum HM30L57500 80 (203.2 cm) Front Nitrogen HM30L57900 80 (203.2 cm) Front Oxygen 18-3/4 (47.6 cm) 4-7/8 (12.4 cm) 6-3/8 (17.5 cm) n Shallow cupsink for restricted spaces, ideal for a fume hood installed above an acid or flammable storage cabinet n Provides for front-mounted location above acid/flammable cabinet with flush front n 6 (15.2 cm) x 3 (7.6 cm) inside dimension n Outlet 1-1/2 (3.8 cm) HM34L13700 Cupsink with elbow 48 www.fishersci.com

Thermo Scientific Hamilton Fume Hoods Blowers V-belt Drive Blowers n Designed for installations requiring extensive duct work and closer control of air removal than is possible with direct drive blowers n Available for 115 volt, 60 cycle, single-phase operation n Adjustable fan speeds n Steel housing and aluminum fan wheel. Interior of housing and impellers coated with fume resistant finish n Weather housing furnished n Clockwise rotation standard n Blower should be sized according to both exhaust duct and fume hood superstructure static pressures; information required to calculate pressures are: duct diameter, total straight run of duct, and number and degree of elbows contact us at (800) 955-0707 for proper blower selection n Manual snap switch sold separately see page 50 Inlet Blower Capacity in CFM (Cubic Feet Per Minute), Static Pressure Loss (SP) Motor Size 1/4 SP 1/2 SP 3/4 SP 1 SP 1-1/4 SP 1-1/2 SP 1-3/4 SP 2 SP (115 Volt) HP OD CFM RPM* CFM RPM* CFM RPM* CFM RPM* CFM RPM* CFM RPM* CFM RPM* CFM RPM* HM55L75300 1/6 8 461 1021 237 1055 237 1279 287 1465 (20.3 cm) 652 1301 592 1358 533 1429 444 1534 HM55L75500 1/3 8 691 1362 593 1362 445 1362 237 1465 237 1628 237 1775 237 1911 237 2037 (20.3 cm) 829 1577 800 1656 756 1704 726 1765 652 1808 563 1888 474 1985 350 2078 HM55L76100 1/4 9 904 883 566 883 702 1083 (22.8 cm) 1100 1017 983 1078 874 1145 HM55L76500 3/4 9 1280 1167 1146 1167 923 1167 796 1247 890 1394 983 1530 1030 1643 1124 1763 (22.8 cm) 1639 1416 1592 1465 1523 1501 1448 1550 1373 1596 1287 1643 1218 1701 1156 1772 HM55L76900 1/3 10 975 695 718 745 914 920 1044 1060 (25.4 cm) 1338 886 1240 927 1143 987 1077 1072 HM55L77500 3/4 13-1/4 2216 778 1976 778 1607 778 1328 835 1594 945 1594 1019 (33.6 cm) 2505 850 2328 888 2258 903 2151 944 2066 992 1810 1042 HM55L81300 1/2 13-1/4 1649 629 1262 629 1151 723 1328 835 (33.6 cm) 2126 755 1992 783 1891 823 1727 881 * This is blower RPM not motor RPM, most motors run at 1725 RPM Blowers sized for system with approximately 35' (1006.8 cm) of duct with one 90 degree elbow 100 FPM face velocity Recommended Blower Fume Hood CFM Duct Size 760 10 (25.4 cm) HM55L76100 60 (152.4 cm) 1000 12 (30.5 cm) HM55L76900 72 (182.9 cm) 1250 12 (30.5 cm) HM55L76900 96 (243.8 cm) 1710 14 (35.6 cm) HM55L81300 Quick Ship and Express Ship Program 49

Thermo Scientific Hamilton Fume Hoods Accessories Duct Nozzle Assembly for Perchloric Acid Fume Hoods n Designed for washdown using a positive, fine spray n Stainless steel and fluorocarbon plastic n Large nozzle orifice to minimize plugging n For 12 (30.5 cm) diameter duct, may be cut for smaller diameter duct n Attaches to duct with stainless steel band or screws; bands, screws and fittings for 1/4 (.64 cm) diameter IPS pipe included n Available on extended delivery Water Volume for Each Nozzle HM54L33300 Water Pressure (PSI) 20 30 40 50 60 70 80 Flow Rate (GPM) 1.9 2.3 2.7 3.0 3.3 3.5 3.8 Duct Transitions n Metal ductwork connection fume fume hood exhaust or supply system to building exhaust or supply system n Stainless steel exhaust transition (rectangular to round duct) Rectangular to Round O.D. Height HM54L90100 6 x 9 to 8 round 16 (15.2 x 22.9 cm to 20.3 cm) (40.6 cm) HM54L90200 6 x 15 to 10 round 16 (15.2 x 38.1 cm to 25.4 cm) (40.6 cm) HM54L90300 6 x 23 to 12 round 16 (15.2 x 58.4 cm to 30.5 cm) (40.6 cm) HM54L90400 6 x 30 to 14 round 16 (15.2 x 76.2 cm to 35.6 cm) (40.6 cm) Fume Hood Monitor Blower Duct Drain Connection for Perchloric Acid Fume Hoods n One set of two stainless steel and fluorocarbon plastic drains to provide connection between blower and duct for disposal of washdown waters n Attaches to blower scroll with stainless steel band or screws (included); sized for 1/2 (1.27 cm) diameter IPS pipe, connecting pipe not included n Available on extended delivery n Measures true fume hood face velocity using thermal sensors, sensors are exposed to clean air only n Indicator lights illuminate based on predetermined set-point n Audible and visual alarm HM54LAFA05 Up-blast Blower HM54L33500 Manual Snap-switch Fan Motor Starter n Fractional HP manual AC motor starter Roof 3rd Floor Drain 2nd Floor Locate nozzle approximately every five feet and in each elbow. Fume hood will handle 30 GPM. On long duct system, stage washdown to prevent overflow. Washdown system should drain empty through fume hood nozzles. Frequent washdown of perchloric systems will reduce chance of explosion hazard. A five to ten minute washdown after fume hood usage is sufficient. Remove all apparatus from fume hood interior before washdown. n Mounted in single gang box with flush stainless steel faceplate n Double pole switch for up to 1 HP, single phase, 60 cycle, 115/230V AC motor with overload protection n Heater coil not included, available from local Allen Bradley dealer HM36L20300 Fume Hood 50 www.fishersci.com

Thermo Scientific Hamilton Express Ship Program Thermo Scientific Hamilton Express Ship Program (ESP) The product listed in this section only are stocked and available to ship within 48 hours of receipt of your order. n Steel products are chameleon color to complement all décors and existing lab furniture n 80+ ESP products Quick Ship and Express Ship Program 51

Thermo Scientific Hamilton Express Ship Program SafeAire II Bypass Superstructure ESP54L2595P0BP 72 (182.9 cm) Remote Control Single Service Fixtures n Fixtures have forged brass valve body and outlet. Parts exposed in fume hood have acid and solvent resistant black plastic finish n Removable serrated tip n Flat mounting flange for wall mount n 1 (2.54 cm) mounting hole Outlet PSI Location Type of Service Epoxy Resin Work Surface n With left front cupsink cutout n Corresponds to fume hood depth of 31-1/4 (79.4 cm) Bypass, constant volume superstructure ESP32L55200P 60 (152.4 cm) Front Cold Water ESP30L497GWP 80 (203.2 cm) Front Gas ESP30L497AWP 80 (203.2 cm) Front Air ESP30L497VWP 80 (203.2 cm) Front Vacuum ESP21L72261LFP Fume Hood Airflow Monitor/Alarm 72 (182.9 cm) Epoxy Resin Oval Cupsink n Oval cupsink with 1-1/2 (3.81 cm) outlet and 8-1/8 (20.6 cm) overall height Diameter ESP34L19600P 7-1/2 x 4-1/2 (19.1 x 11.4 cm) n Measures true fume hood face velocity using thermal sensors, sensors are exposed to clean air only n Indicator lights illuminate based on predetermined set-point n Audible and visual alarm ESP54LAFA05P 52 www.fishersci.com

Thermo Scientific Hamilton Express Ship Program Sitting Height n Standard without locks Drawer Cabinets 21-5/8 (54.9 cm) Typical End View 29-3/8 (74.6 cm) n Shelves are adjustable in half-inch increments n All cabinets include a cutout for service access; if cabinet backs are exposed, a finished back is required n Holes are located in the toebase at each front corner for access to leveling device n Order work surfaces separately n Two 4-1/2 (11.4 cm) high drawers above one 10-1/4 (26.0 cm) high file drawer n Includes pullboard ESP130H4220BP 24 (61.0 cm) Door/Drawer Cabinets n One 4-1/2 (11.4 cm) high drawer above cupboard n Includes pullboard n Right-hinged ESP126H2220BP 18 (45.7 cm) Standing Height 35-1/4 (89.5 cm) 21-5/8 (54.9 cm) Unless otherwise noted n Standard without locks n Shelves are adjustable in half-inch increments n All cabinets include a cutout for service access; if cabinet backs are exposed, a finished back is required n Holes are located in the toebase at each front corner for access to leveling device n Order work surfaces separately Drawer Cabinets n Two 4-1/2 (11.4 cm) high drawers above two 7-3/8 (18.7 cm) high drawers ESP164H8320BP Typical End View Double Door Sink Cabinets n Solid hinged doors n Back has cutout for large sinks n Order sink supports separately ESP115H6320BP ESP115H8320BP Quick Ship and Express Ship Program 53

Thermo Scientific Hamilton Express Ship Program Standing Height 21-5/8 (54.9 cm) Typical End View 35-1/4 (89.5 cm) n Standard without locks n Shelves are adjustable in half-inch increments n All cabinets include a cutout for service access; if cabinet backs are exposed, a finished back is required n Holes are located in the toebase at each front corner for access to leveling device n Order work surfaces separately Door/Drawer Cabinets n One 4-1/2 (11.4 cm) high drawer above a cupboard n One adjustable shelf in cupboard n Right-hinged ESP136H2320BP 18 (45.7 cm) Double Door Cabinets n Solid hinged double doors n One adjustable shelf ESP106H8320BP n Two 4-1/2 (11.4 cm) high drawers above a cupboard n One adjustable shelf in cupboard ESP148H6320BP ESP148H8320BP n Two 4-1/2 (11.4 cm) high drawers above two 7-3/8 (18.7 cm) high n One adjustable shelf in cupboard Drawers at left ESP180H6320BP ESP180H8320BP Drawers at right ESP181H6320BP ESP181H8320BP Drawer Cabinets n Two 4-1/2 (11.4 cm) high drawers above two 7-3/8 (18.7 cm) high drawers ESP164H4320BP 24 (61.0 cm) 54 www.fishersci.com

Thermo Scientific Hamilton Express Ship Program Acid Storage Base Cabinets n Flush front panel above solid hinged doors n Chemical resistant Resisto-roc lining n One adjustable shelf n Vent in back is 10 (25.4 cm) from right end ESP144H6320BP ESP144H8320BP Solvent Storage Base Cabinets n For storage of flammable/combustible materials n Self-closing locking double doors n One adjustable shelf n Two 2 (5.1 cm) pipe threaded vent outlets with bungs plugs on back n Warning label is included n 22 (55.9 cm) cabinet depth n Factory Mutual Approved n UL Listed n Complies with NFPA Standards and OSHA Regulations Full height doors ESP950S7531BP ESP950S7551BP Adjustable-height Tables n Powder painted steel construction n Order work surfaces separately n Adjustable height legs. Minimal tools required for readjustment n Table with levelers weight capacity is 600 lbs. n Height: 28 to 37 (71.1-94.0 cm) Depth: 29 (73.7 cm) ESPAFX93600P ESPAFX94800P ESPAFX96000P 60 (152.4 cm) Quick Ship and Express Ship Program 55

Thermo Scientific Hamilton Express Ship Program Frames and Kneespace Rails Kneespace Rail n Two rails required for front and back (rear) support Depth Number of Drawers ESP500H4020P 30 (76.2 cm) N/A N/A ESP501H2220P 30 (76.2 cm) 21-1/2 (54.6 cm) 1 Frame with One Drawer ESP500H4030P N/A N/A Frame with Two Drawers ESP502H2200P 21-1/2 (54.6 cm) 2 ESP500H4050P N/A N/A n Use frames and rails with drawers to support work surfaces: n Suspended between two base cabinets n Between cabinet and wall n With leg assemblies n Height of all rails and frames is 4-1/2 (11.4 cm) ESP502H2220BP 21-1/2 (54.6 cm) 2 ESP500H4090P 72 (182.9 cm) N/A N/A End Leg Assembly with Leg Rail n Double leg assembly with adjustable leveler glides and vinyl leg shoes to provide support at either end of a table frame n Includes crossmember for added rigidity (must be field attached) n Attachment hardware is included 28 (71.1 cm) deep ESP522H4020P ESP522H4620P Height 29 (73.7 cm) 35 (88.9 cm) Kneespace Panel n Use at rear of kneespace to provide physical and visual barrier Work Surface Height Panel 30 (76.2 cm) ESP616H5220P 30 (76.2 cm) ESP616H6220P ESP616H8220P ESP616H5320P 30 (76.2 cm) ESP616H6320P ESP616H8320P Panel End Support n Use in place of legs on one end to support drawer frame n Angles are bolted to panel for easy removal n Attachment hardware is included 28 (71.1 cm) deep ESP525H3080P ESP525H3680P Height 29 (73.7 cm) 35 (88.9 cm) 56 www.fishersci.com

Thermo Scientific Hamilton Express Ship Program Front Filler Panels Rear Filler Panel n For use between adjacent base cabinets n Can be cut to size in the field n Includes concealed clips for attaching to the cabinet For standing height cabinets ESP614H6320P 12 (30.5 cm) n For use to close space at rear of base cabinet when 30 (76.2 cm) deep work surface is specified n Can be cut to size in the field n Includes concealed clips for attaching to the cabinet For sitting height cabinets ESP611H7220P 7-3/8 (18.7 cm) For standing height cabinets ESP611H7320P 7-3/8 (18.7 cm) Center Filler Panels n For use between back-to-back base cabinets n Can be cut to size in the field n Includes concealed clips for attaching to the cabinet For standing height cabinets ESP612H8320P 8-3/4 (22.2 cm) ESP612H4320P 14-3/4 (37.5 cm) Quick Ship and Express Ship Program 57

Thermo Scientific Hamilton Express Ship Program 13 (33.0 cm) 31 (78.7 cm) n Cases include soffit bottoms n Standard without locks n Two shelves are included and are adjustable in half-inch increments n Cases have integral finished backs and fixed hanger rails; wall hanger cleats are included n 7/32 (.56 cm) thick glass is used on cases with glass doors Wall Cases n Framed glass n Hinged double doors ESP712H6330BP ESP712H8330BP Typical End View Wall Scribe n For use on exposed ends of wall cases to conceal hanger rails Wall Cases Fillers n Can be cut to size in the field n Includes concealed clips for attaching to the wall case ESP618H0360P 1-3/8 (3.49 cm) n For use to close space at end of wall case adjacent to a wall n Can be cut to size in the field n Includes concealed clips for attaching to the wall case ESP601H2330P ESP601H6330P 1 (2.54 cm) 6 (15.2 cm) n When installing tall cases under soffits, 85-1/2 (217.1 cm) minimum height is required from finished floor to finished soffit n Standard without locks Tall Case n Framed glass n Hinged double doors 84-5/8 (215.0 cm) n Five shelves are included and are adjustable in half-inch increments n 7/32 (.56 cm) thick glass is used on cases with glass doors ESP812H8920BP 22 (35.9 cm) Typical End View 58 www.fishersci.com

Thermo Scientific Hamilton Express Ship Program Work Surfaces without Cutouts n Chemical resistant black epoxy n 1 (2.54 cm) thick n Curb must be ordered separately Depth ESP21L3036EP 30 (76.2 cm) ESP21L3048EP 30 (76.2 cm) ESP21L3060EP 60 (152.4 cm) 30 (76.2 cm) ESP21L3072EP 72 (182.9 cm) 30 (76.2 cm) ESP21L3096EP 96 (243.8 cm) 30 (76.2 cm) Work Surfaces with Sink Cutout Work Surface Curb n Chemical resistant black epoxy n 1 (2.54 cm) thick n Sink cutout: 15 x 23 (38.1 x 58.4 cm), fixture hole cutout diameter is 1-3/8 (3.5 cm) n Order curb separately n Top depth: 30 (76.2 cm) n Chemical resistant black epoxy n 3/4 (1.91 cm) thick x 4 (10.2 cm) high ESP22L0496EP Length 96 (243.8 cm) ESP21L3036ESP ESP21L3048ESP Quick Ship and Express Ship Program 59

Thermo Scientific Hamilton Express Ship Program Glassware Pegboard Epoxy Resin Sinks n Suitable for holding a wide variety of glassware n Cold, heat, chemical, moisture and impact resistant pegs and board n 1 (2.54 cm) thick black epoxy resin pegboard n One-piece black lab sink for use with Epoxy Resin work tops n High resistance to acids, solvents and salts n Highly non-absorbent n Coved corners, sides and bottom n Order outlet separately, see below Number of Pegs 5 6-1/2 8 Board Size x Height (12.7 cm) (16.5 cm) (20.3 cm) ESP52L86400P 30 x 30 (76.2 x 76.2 cm) 23 19 9 ESP52L77800P Inside Dimensions 24 x 16 x 12 (61.0 x 40.6 x 30.5 cm) Pegboard Drip Stop Trough n For use with pegboard n Stainless steel construction n Drain located at right end Sink Support Assembly n Metal frame to support and position epoxy resin sink Base Unit ESP52H73400P ESP52H73600P Board Size Depth ESP52L84400P 30 (76.2 cm) 2 (5.08 cm) Epoxy Resin Sink Outlet n NPSM threads n 5-hole integral resin strainer Hot and Cold Water Mixing Faucets ESP32W40600P n 6 (15.2 cm) spread rigid gooseneck with serrated tip n Integral vacuum breaker of forged brass n 1-3/16 (3.02 cm) IPS mounting shank with locknut and washer, requires 1-3/8 (3.5 cm) mounting hole n 3/8 (.96 cm) O.D. flexible copper tubing for connection to hot and cold water Diameter A B C D E ESP52L44300P 1-1/2 3-3/8 1-7/16 1/4 1/8 2-5/8 (3.81 cm) (8.57 cm) (3.65 cm) (.64 cm) (.32 cm) (6.67 cm) Epoxy Overflow n 1-1/2 (3.81 cm) outlet n Not compatible with the epoxy resin outlet Height ESP34L24200P 6 (15.2 cm) 60 www.fishersci.com

Thermo Scientific Hamilton Fume Hoods Alphabetical Index Quick Ship Acid Storage Cabinet....................... 14 Balance Table............................. 18 Base Cabinets................. 11-15, 24, 26-28 Base Molding............................. 14 Blower Duct Drain Connection................. 50 Blowers, Fume Hood....................... 49 Cabinets, Suspended....................... 23 Cart, Mobile............................... 23 Cases, Tall................................. 17 Cases, Wall................................ 16 Cement................................... 31 Colors..................................... 2 Construction, Steel Casework................ 4 Cupsinks............................... 34, 48 Customer Service............................. 2 Drawer, Suspended........................ 23 Drench Hose.............................. 37 Drip Stop................................. 37 Duct Nozzle Assembly...................... 50 Duct Transitions............................. 50 Electrical Fixtures....................... 36, 50 End Support Panel......................... 21 Eye Wash................................. 37 Fan Motor Starter............................ 50 Fillers............................... 15-17, 29 Fixtures............................. 35-36, 48 Fume Hoods...................... 6, 9-10, 38-45 Fume Hood Accessories.................... 50 Fume Hood Base Cabinets............... 13, 28 Fume Hood Blowers........................ 49 Fume Hood Monitor........................ 50 Fume Hood Work Surfaces............... 46-47 Instructions................................. 21 Instrument Cart......................... 22-23 Island Table Assemblies................... 6-7 Kneespace Panel........................... 21 Kneespace Rail............................ 19 Laboratory Sinks........................... 34 Laboratory Tables.................... 18, 28, 30 Laboratory Table Rails and Frames........ 19-20 Laboratory Workstations................... 5-8 Leg Stretcher.............................. 20 Legs, Table................................ 20 Mobile Instrument Cart.................. 22-23 Molding, Base............................. 14 Monitor, Fume Hood........................ 50 Ordering Information........................ 2 Outlet, Sink................................ 34 Overflow, Sink............................. 34 Panel End Support......................... 21 Pegboard................................. 37 Pipe Support Frame........................ 14 Power Strips................................ 36 Quick Ship Colors........................... 2 Rails and Frames........................ 20-21 Reagent Shelving.......................... 33 Remote Control Service Fixtures............. 48 Rough-in Information....................... 45 SafeStor................................ 24 Safety Equipment.......................... 37 Safety Station............................. 37 Scribes................................ 15-16 Service Fixtures...................... 35-36, 48 Shelving, Reagent.......................... 33 Sink Cabinets........................ 8, 13, 28 Sinks..................................... 34 Sink Support........................... 13, 28 Sitting Height Base Cabinets............. 11, 26 Smooth-on Cement......................... 31 Solvent Storage Cabinets................... 14 Stabilizing Slab............................ 18 Standing Height Base Cabinets..... 12-14, 27-28 Steel Casework Construction................. 4 Stretcher, Leg............................. 20 Support Columns............................. 33 Support End Panel......................... 21 Suspended Cabinets....................... 23 Table Rails and Frames..................... 19 Table Legs................................ 20 Tables................................. 18, 28 Table Shelf................................ 21 Tall Storage Cases......................... 17 Toggle Switch............................... 36 Traps, Sink................................ 34 Trough, Pegboard.......................... 37 Utility Table Shelf............................ 21 Valves...................................... 36 Vent, Cabinet.............................. 14 Wall Cases................................ 16 Wood Base Cabinets and Components...... 25-28 Workstations Assemblies.................. 5-8 Work Surfaces, Fume Hoods.............. 46-47 Work Surfaces, Tables................... 31-32 Alphabetical Index Express Ship Program Airflow Monitor/Alarm...52 Base Cabinet, Acid Storage... 55 Base Cabinet, Sink Cabinets....53 Base Cabinet, Solvent Storage... 55 Combination Cabinets... 53, 54 Cupsink...52 Drawer Cabinets...53 End Leg Assemblies...56 Fillers and Panels...57 Frames...56 SafeAire II...52 Kneespace Panel...56 Kneespace Rails...56 Mixing Faucets...60 Panel End Support...56 Pegboard, Drip Trough.... 60 Pegboard, Glassware.... 60 Remote Control Fixture...52 Sinks, Epoxy Resin... 60 Sink Outlet...60 Sink Overflow...60 Sink Support Assembly...60 Tables, Adjustable Height... 55 Table Frames...55 Tall Case...58 Wall Cases...58 Wall Case Fillers...58 Wall Scribe....58 Work Surface....52 Work Surface Curb....59 Work Surfaces With Cutout...59 Work Surfaces Without Cutouts...59 Index, Alphabetical.... 61 Index, Numerical... 62-64 Index, Fume Hoods, Specialty... 64 Quick Ship and Express Ship Program 61

Thermo Scientific Hamilton Fume Hoods Numerical Index Quick Ship Page No. Page No. Page No. Page No. Page No. HM-SMOOTH-ON......... 31 HM0199410.............. 18 HM019945............... 18 X Series Numbers HMAEX93600............. 18 HMAEX94800............. 18 HMAEX96000............. 18 HMAFX93600............. 18 HMAFX94800............. 18 HMAFX96000............. 18 E Series Numbers HMEMD224BC...30 HMEMD224BE...30 HMEMD224BL...30 HMEMD224PC...30 HMEMD224PE...30 HMEMD224PL...30 HMEMD225BC...30 HMEMD225BE...30 HMEMD225BL...30 HMEMD225PC...30 HMEMD225PE...30 HMEMD225PL...30 HMEMD226BC...30 HMEMD226BE...30 HMEMD226BL...30 HMEMD226PC...30 HMEMD226PE...30 HMEMD226PL...30 HMEMD227BC...30 HMEMD227BE...30 HMEMD227BL...30 HMEMD227PC...30 HMEMD227PE...30 HMEMD227PL...30 HMEMD234BC...30 HMEMD234BE...30 HMEMD234BL...30 HMEMD234PC...30 HMEMD234PE...30 HMEMD234PL...30 HMEMD235BC...30 HMEMD235BE...30 HMEMD235BL...30 HMEMD235PC...30 HMEMD235PE...30 HMEMD235PL...30 HMEMD236BC...30 HMEMD236BE...30 HMEMD236BL...30 HMEMD236PC...30 HMEMD236PE...30 HMEMD236PL...30 HMEMD237BC...30 HMEMD237BE...30 HMEMD237BL...30 HMEMD237PC...30 HMEMD237PE...30 HMEMD237PL...30 HMEMD244BC...30 HMEMD244BE...30 HMEMD244BL...30 HMEMD244PC...30 HMEMD244PE...30 HMEMD244PL...30 HMEMD245BC...30 HMEMD245BE...30 HMEMD245BL...30 HMEMD245PC...30 HMEMD245PE...30 HMEMD245PL...30 HMEMD246BC...30 HMEMD246BE...30 HMEMD246BL...30 HMEMD246PC...30 HMEMD246PE...30 HMEMD246PL...30 HMEMD247BC...30 HMEMD247BE...30 HMEMD247BL...30 HMEMD247PC...30 HMEMD247PE...30 HMEMD247PL...30 HMEMD324BC...30 HMEMD324BE...30 HMEMD324BL...30 HMEMD324PC...30 HMEMD324PE...30 HMEMD324PL...30 HMEMD325BC...30 HMEMD325BE...30 HMEMD325BL...30 HMEMD325PC...30 HMEMD325PE...30 HMEMD325PL...30 HMEMD326BC...30 HMEMD326BE...30 HMEMD326BL...30 HMEMD326PC...30 HMEMD326PE...30 HMEMD326PL...30 HMEMD327BC...30 HMEMD327BE...30 HMEMD327BL...30 HMEMD327PC...30 HMEMD327PE...30 HMEMD327PL...30 HMEMD334BC...30 HMEMD334BE...30 HMEMD334BL...30 HMEMD334PC...30 HMEMD334PE...30 HMEMD334PL...30 HMEMD335BC...30 HMEMD335BE...30 HMEMD335BL...30 HMEMD335PC...30 HMEMD335PE...30 HMEMD335PL...30 HMEMD336BC...30 HMEMD336BE...30 HMEMD336BL...30 HMEMD336PC...30 HMEMD336PE...30 HMEMD336PL...30 HMEMD337BC...30 HMEMD337BE...30 HMEMD337BL...30 HMEMD337PC...30 HMEMD337PE...30 HMEMD337PL...30 HMEMD344BC...30 HMEMD344BE...30 HMEMD344BL...30 HMEMD344PC...30 HMEMD344PE...30 HMEMD344PL...30 HMEMD345BC...30 HMEMD345BE...30 HMEMD345BL...30 HMEMD345PC...30 HMEMD345PE...30 HMEMD345PL...30 HMEMD346BC...30 HMEMD346BE...30 HMEMD346BL...30 HMEMD346PC...30 HMEMD346PE...30 HMEMD346PL...30 HMEMD347BC...30 HMEMD347BE...30 HMEMD347BL...30 HMEMD347PC...30 HMEMD347PE...30 HMEMD347PL...30 Lab Assembly Numbers HMLAB001................ 5 HMLAB002................ 5 HMLAB003................ 5 HMLAB004................ 5 HMLAB005................ 5 HMLAB006................ 5 HMLAB007................ 5 HMLAB008................ 5 HMLAB009................ 5 HMLAB010................ 5 HMLAB011................ 6 HMLAB012................ 6 HMLAB013................ 6 HMLAB014................ 6 HMLAB015................ 6 HMLAB016................ 6 HMLAB017................ 6 HMLAB018................ 6 HMLAB019................ 6 HMLAB020................ 7 HMLAB021................ 7 HMLAB022................ 7 HMLAB023................ 8 HMLAB024................ 8 HMLAB025................ 9 HMLAB026................ 9 HMLAB027............... 10 HMLAB028............... 10 HMLAB029................ 9 HMLAB030................ 9 HMLAB031............... 10 HMLAB032............... 10 Lab Cart Numbers HMMICLAB001........... 22 HMMICLAB002........... 22 HMMICLAB003........... 22 HMMICLAB004........... 22 HMMICLAB005........... 22 HMMICLAB006........... 22 HMMICLAB007........... 22 HMMICLAB008........... 22 HMMICLAB009........... 23 HMMICLAB010........... 23 HMMICLAB011........... 23 A Series Numbers HM102A222B............. 26 HM102A232B............. 27 HM102A422B............. 26 HM102A432B............. 27 HM103A222B............. 26 HM103A232B............. 27 HM103A422B............. 26 HM103A432B............. 27 HM106A532B............. 27 HM106A622B............. 26 HM106A632B............. 27 HM106A822B............. 26 HM106A832B............. 27 HM109A632B............. 27 HM109A832B............. 27 HM115A5320............. 28 HM115A6320............. 28 HM115A8320............. 28 HM116A7320............. 28 HM118A9320............. 28 HM121A532B............. 28 HM121A632B............. 28 HM121A832B............. 28 HM126A222B............. 26 HM126A422B............. 26 HM127A222B............. 26 HM127A422B............. 26 HM130A222B............. 26 HM133A222B............. 26 HM133A422B............. 26 HM136A232B............. 27 HM136A432B............. 27 HM137A232B............. 27 HM137A432B............. 27 HM148A532B............. 27 HM148A632B............. 27 HM148A732B............. 27 HM148A832B............. 27 HM152A632B............. 27 HM152A832B............. 27 HM173A632B............. 27 HM173A832B............. 27 HM200A222B............. 26 HM200A422B............. 26 HM206A632B............. 27 HM206A832B............. 27 HM207A632B............. 27 HM207A832B............. 27 HM263A632B............. 27 HM263A832B............. 27 HM611A7220............. 29 HM611A7320............. 29 HM612A4220............. 29 HM612A4320............. 29 HM612A8220............. 29 HM612A8320............. 29 HM614A0220............. 29 HM614A0320............. 29 HM614A0420............. 29 HM614A0520............. 29 HM614A1020............. 29 C Series Numbers HM950C330.............. 28 HM950C331.............. 28 HM950C334.............. 28 HM950C335.............. 28 HM950C338.............. 28 HM950C339.............. 28 HM950C342.............. 28 HM950C343.............. 28 HM950C380.............. 28 HM950C381.............. 28 HM950C384.............. 28 HM950C385.............. 28 HM950C388.............. 28 HM950C389.............. 28 HM950C392.............. 28 HM950C393.............. 28 H Series Numbers HM102H2220B............ 11 HM102H2320B............ 12 HM102H4220B............ 11 HM102H4320B............ 12 HM103H2220B............ 11 HM103H2320B............ 12 HM103H4220B............ 11 HM103H4320B............ 12 HM106H5320B............ 12 HM106H6220B............ 11 HM106H6320B............ 12 HM106H8220B............ 11 HM106H8320B............ 12 HM109H6320B............ 12 HM109H8320B............ 12 HM115H5320B............ 13 HM115H6320B............ 13 HM115H8320B............ 13 HM116H7320B............ 13 HM118H9320B............ 13 HM121H5320B.......... 9, 13 HM121H6320B......... 10, 13 HM121H8320B....... 9, 10, 13 HM126H2220B............ 11 HM126H4220B............ 11 HM127H2220B............ 11 HM127H4220B............ 11 HM130H2220B............ 11 HM130H4220B............ 11 HM133H2220B............ 11 HM133H4220B............ 11 HM136H2320B............ 12 HM136H4320B............ 12 HM137H2320B............ 12 HM137H4320B............ 12 HM140H2220B............ 11 HM140H4220B............ 11 HM141H2320B............ 12 HM141H4320B............ 12 HM144H5320B.......... 9. 14 HM144H6320B......... 10, 14 HM144H8320B....... 9, 10, 14 HM148H6320B............ 12 HM148H7320B............ 12 HM148H8320B............ 12 HM164H2320B............ 12 HM164H4320B............ 12 HM164H6320B............ 13 HM164H8320B............ 13 HM168H6220B............ 11 HM177H6320B............ 12 HM180H6320B............ 12 HM180H8320B............ 12 HM181H6320B............ 12 HM181H8320B............ 12 HM200H6320B............ 13 HM200H8320B............ 13 HM209H6320B............ 13 62 www.fishersci.com

Thermo Scientific Hamilton Fume Hoods Numerical Index Quick Ship Page No. Page No. Page No. Page No. Page No. HM209H8320B............ 13 HM220H8320B............ 13 HM221H8320B............ 13 HM422H6320B............ 13 HM500H4010............. 19 HM500H4020............. 19 HM500H4030............. 19 HM500H4040............. 19 HM500H4050............. 19 HM500H4060............. 19 HM500H4070............. 19 HM500H4080............. 19 HM500H4090............. 19 HM501H2210B............ 19 HM501H2220B............ 19 HM501H2810B............ 19 HM501H2820B............ 19 HM501H4270............. 19 HM501H4870............. 19 HM502H2200B............ 19 HM502H2210B............ 19 HM502H2220B............ 19 HM502H2230B............ 19 HM502H2800B............ 19 HM502H2810B............ 19 HM502H2820B............ 19 HM502H2830B............ 19 HM503H2220B............ 19 HM503H2230B............ 19 HM503H2820B............ 19 HM503H2830B............ 19 HM520H622LB............ 23 HM522H3010............. 20 HM522H3020............. 20 HM522H3610............. 20 HM522H3620............. 20 HM522H4010............ 20 HM522H4020............ 20 HM522H4610............ 20 HM522H4620............ 20 HM523H3010............. 20 HM523H3020............. 20 HM523H3610............. 20 HM523H3620............. 20 HM523H4010............ 20 HM523H4020............ 20 HM523H4610............ 20 HM523H4620............ 20 HM525H3020............. 21 HM525H3080............. 21 HM525H3620............. 21 HM525H3680............. 21 HM529H2200............. 20 HM529H2800............. 20 HM530H2360............. 21 HM530H2480............. 21 HM530H2600............. 21 HM530H2720............. 21 HM530H3360............. 20 HM530H3480............. 20 HM530H3600............. 20 HM530H3720............. 20 HM530H8360............. 21 HM530H8480............. 21 HM530H8600............. 21 HM530H8720............. 21 HM568H412LB............ 23 HM569H412LB............ 23 HM571H412LB............ 23 HM577H522LB............ 23 HM577H622LB............ 23 HM578H512LB............ 23 HM600H2220............. 15 HM600H2320............. 15 HM600H6220............. 15 HM600H6320............. 15 HM601H2330............. 16 HM601H6330............. 16 HM605H2920............. 17 HM605H6920............. 17 HM607H1220............. 15 HM607H1320............. 15 HM607H2220............. 15 HM607H2320............. 15 HM611H7220............. 15 HM611H7320........ 9, 10, 15 HM612H4220............. 15 HM612H4320............. 15 HM612H8220............. 15 HM612H8320............. 15 HM614H3420............. 15 HM614H6220............. 15 HM614H6320............. 15 HM616H4220............. 21 HM616H4320............. 21 HM616H5220............. 21 HM616H5320............. 21 HM616H6220............. 21 HM616H6320............. 21 HM616H7220............. 21 HM616H7320............. 21 HM616H8220............. 21 HM616H8320............. 21 HM618H0230............. 15 HM618H0240............. 15 HM618H0250............. 15 HM618H0330............. 15 HM618H0340............. 15 HM618H0350............. 15 HM618H0360............. 16 HM700H6330............. 16 HM700H8330............. 16 HM706H6330B............ 16 HM706H8330B............ 16 HM712H6330B............ 16 HM712H8330B............ 16 HM715H6330B............ 16 HM715H8330B............ 16 HM718H6330B............ 16 HM718H8330B............ 16 HM722H6330............. 16 HM722H8330............. 16 HM723H2330B............ 16 HM724H2330B............ 16 HM800H6920............. 17 HM800H8920............. 17 HM806H6920B............ 17 HM806H8920B............ 17 HM812H6920B............ 17 HM812H696LB.............17 HM812H8920B............ 17 HM818H6920B............ 17 HM818H8920B............ 17 HM900H0200............. 36 HM900H0280............. 36 HM923H9360............. 18 HM923H9480............. 18 HM923H9600............. 18 HM950H040.............. 23 HM950H330B............. 18 HM950H331B............. 18 HM950H334B............. 18 HM950H335B............. 18 HM950H338B............. 18 HM950H339B............. 18 HM950H342B............. 18 HM950H343B............. 18 HM950H380B............. 18 HM950H381B............. 18 HM950H384B............. 18 HM950H385B............. 18 HM950H388B............. 18 HM950H389B............. 18 HM950H392B............. 18 HM950H393B............. 18 L Series Numbers HM04L02400........ 9, 10, 14 HM21L2418C............. 31 HM21L2418E............. 31 HM21L2424C............. 31 HM21L2424E............. 31 HM21L2430C............. 31 HM21L2430E.............. 31 HM21L2434C............. 31 HM21L2434E.............. 31 HM21L2436C............. 31 HM21L2436E............. 31 HM21L2442C............. 31 HM21L2442E............. 31 HM21L2448C............. 31 HM21L2448E............. 31 HM21L2454C............. 31 HM21L2454E............. 31 HM21L2460C............. 31 HM21L2460E............. 31 HM21L2472C............. 31 HM21L2472E............. 31 HM21L2484E............. 31 HM21L2496E............. 31 HM21L3018C............. 31 HM21L3018E............. 31 HM21L3024C............. 31 HM21L3024E............. 31 HM21L3030C............. 31 HM21L3030E............. 31 HM21L3030ES............ 31 HM21L3036C.......... 18, 31 HM21L3036E.......... 18, 31 HM21L3036EC............ 31 HM21L3036ES............ 31 HM21L3040C............. 31 HM21L3040E............. 31 HM21L3040ES............ 31 HM21L3042C............. 31 HM21L3042E............. 31 HM21L3048C.......... 18, 31 HM21L3048E.......... 18, 31 HM21L3048EC............ 31 HM21L3048ES............ 31 HM21L3054C.......... 31, 32 HM21L3054E............. 31 HM21L3054ES......... 31, 32 HM21L3055C............. 31 HM21L3055E............. 31 HM21L3060C.......... 18, 31 HM21L3060E.......... 18, 31 HM21L3060EC............ 31 HM21L3060ES......... 31, 32 HM21L3072C............. 31 HM21L3072E............. 31 HM21L3084C............. 31 HM21L3084E............. 31 HM21L3096E............. 31 HM21L3648C............. 32 HM21L3654C............. 32 HM21L3660C............. 32 HM21L4826000........... 46 HM21L4826000V.......... 46 HM21L48261LF......... 9, 47 HM21L48261LFV........ 9, 47 HM21L48261LR........... 46 HM21L48261RF........... 47 HM21L48261RR........... 46 HM21L48261LRV.......... 46 HM21L4836E............. 32 HM21L4854C............. 32 HM21L4860C............. 32 HM21L5424EC............ 32 HM21L5430E............. 32 HM21L5430EC............. 32 HM21L5436E............. 32 HM21L5436EC............ 32 HM21L5436EE............ 32 HM21L5448E............. 32 HM21L60261LFV........ 9, 47 HM21L60261LRV.......... 46 HM21L72261LRV.......... 46 HM21L6024EC............ 32 HM21L6026000........... 46 HM21L6026000V.......... 46 HM21L60261LF......... 9, 47 HM21L60261LFV........ 9, 47 HM21L60261LR........... 46 HM21L60261RF........... 47 HM21L60261RR........... 46 HM21L6030E............. 32 HM21L6030EC............ 32 HM21L6036E............. 32 HM21L6036EC............ 32 HM21L6036EE............ 32 HM21L6048E............. 32 HM21L7226000........... 46 HM21L7226000V.......... 46 HM21L72261LF........ 10, 47 HM21L72261LFV....... 10, 47 HM21L72261LR........... 46 HM21L72261RF........... 47 HM21L72261RR........... 45 HM21L8426000........... 46 HM21L8426000V.......... 46 HM21L84261LF........... 47 HM21L84261LFV.......... 46 HM21L84261LR........... 46 HM21L84261LRV.......... 46 HM21L84261RF........... 47 HM21L84261RR........... 45 HM21L9626000........... 46 HM21L9626000V.......... 46 HM21L3648C............. 32 HM21L96261LF........... 47 HM21L96261LFV.......... 46 HM21L96261LR........... 46 HM21L96261RF........... 47 HM21L96261RR........... 46 HM21L96262BF........ 10, 47 HM21L96262BFV....... 10, 47 HM21L96262BRV.......... 10 HM22L0418E............. 32 HM22L0423E............. 32 HM22L0424C............. 32 HM22L0424E............. 32 HM22L0429E............. 32 HM22L0430C............. 32 HM22L0430E............. 32 HM22L0433C............. 32 HM22L0433E............. 32 HM22L0434C.............. 32 HM22L0434E............. 32 HM22L0436C..............32 HM22L0436E............. 32 HM22L0439C............. 32 HM22L0439E............. 32 HM22L0440C............. 32 HM22L0440E............. 32 HM22L0442C............. 32 HM22L0442E............. 32 HM22L0448C............. 32 HM22L0448E............. 32 HM22L0454C............. 32 HM22L0454E............. 32 HM22L0455C............. 32 HM22L0455E............. 32 HM22L0460C............. 32 HM22L0460E............. 32 HM22L0472C............. 32 HM22L0472E............. 32 HM22L0484C............. 32 HM22L0484E............. 32 HM22L0496E............. 32 HM24L08400............. 33 HM24L08500............. 33 HM24L17100............. 33 HM24L21500............. 33 HM24L21600............. 33 HM24L22100............. 33 HM24L22200............. 33 HM24L22300............. 33 HM24L22400............. 33 HM24L22500............. 33 HM24L22600.............. 33 HM24L22800.............. 33 HM24L22900.............. 33 HM30L497AW....... 9, 10, 48 HM30L497GW....... 9, 10, 48 HM30L497VW....... 9, 10, 48 HM30L499AW............ 48 HM30L499GW............ 48 HM30L499VW............ 48 HM30L53500............. 36 HM30L53800............. 36 HM30L54100............. 36 HM30L54700............. 36 HM30L57400............. 48 HM30L57500............. 48 HM30L57800............. 48 HM30L57900............. 48 HM32L38300............. 37 HM32L51300............. 35 HM32L53300............. 37 HM32L53900............. 37 HM32L55200............. 48 HM32L55400............. 48 HM32L57700............. 48 HM32L57900............. 48 Quick Ship and Express Ship Program 63

Thermo Scientific Hamilton Fume Hoods Numerical Index Quick Ship and Express Ship Program Page No. Page No. Page No. Page No. HM32L59600........ 9, 10, 48 HM32L59700............. 48 HM32L63000............. 48 HM32L63100............. 48 HM34L01800..............34 HM34L13700.........9, 10, 48 HM34L19600.......... 34, 48 HM34L22400............. 34 HM34L24200..............34 HM36L20300............. 50 HM36L21100............. 36 HM36L22400............. 36 HM36L224H0.............. 36 HM36L22500............. 36 HM36L225H0.............. 36 HM36L22600............. 36 HM36L226H0............. 36 HM36L22700............. 36 HM36L227H0............. 36 HM52L44100............. 34 HM52L44200............. 34 HM52L44300............. 34 HM52L44400............. 34 HM52L54300............. 37 HM52L54400............. 37 HM52L74300............. 28 HM52L74400............. 28 HM52L74600............. 28 HM52L74700............. 28 HM52L74800............. 28 HM52H75000............. 13 HM52L75600............. 13 HM52L77800............. 34 HM52L78400.............. 37 HM52L78500............. 37 HM52L78600............. 37 HM52L84300............. 37 HM52L84400............. 37 HM52L86300............. 37 HM52L86400............. 37 HM52L933L0............. 34 HM52L939L0............. 34 HM54LAFA05............. 50 HM54L2591P0B......... 9, 38 HM54L2594P0B......... 9, 38 HM54L2597P0B........ 10, 38 HM54L2600P0B........ 10, 38 HM54L2735K0B........... 40 HM54L2793K0B........... 39 HM54L2797K0B........... 39 HM54L2738K0B........... 40 HM54L2741K0B.......... 40 HM54L2570P0B........... 41 HM54L2571P0B........... 41 HM54L2572P0B........... 41 HM54L2573P0B........... 41 HM54L2574P0B........... 41 HM54L33300............. 50 HM54L33500............. 50 HM54L51200B............ 43 HM54L51300B............ 43 HM54L90100............. 50 HM54L90200...........................9, 38, 39, 40, 43, 50 HM54L90300........................9, 10, 38, 39, 40, 43, 50 HM54L90400.... 10, 38, 43, 50 HM55L75300..............49 HM55L75500..............49 HM55L76100.. 9, 38, 40, 43, 49 HM55L761SR............. 39 HM55L76500............. 49 HM55L76900...........................9, 10, 38, 40, 43, 49 HM55L77500............. 49 HM55L81300..... 10, 38, 43, 49 HM55L813SR............. 39 HM57L41100............. 14 HM57L42300............. 14 HM90L04000......... 9, 10, 14 HM90L06000........ 9, 10, 14 S Series Numbers HM554S707PB............ 44 HM554S710PB............ 44 HM554S713PB............ 44 HM554S716PB............ 44 HM950S7521B............ 14 HM950S7531B............ 14 HM950S7551B............ 14 HM950S7781B............ 14 HM950S7791B......... 10, 14 HM950S7811B............ 14 HM950S8650............. 24 HM950S8660............. 24 HM950S8670............. 24 HM950S8680............. 24 HM950S8690............. 24 HM950S8700............. 24 HM950S8710............. 24 HM 950S8720............. 24 HM950S8730............. 24 HM950S8740............. 24 HM950S8750............. 24 HM950S8760............. 24 HM950S8770............. 24 HM950S8780............. 24 HM950S8790............. 24 HM 950S8800............. 24 HM 950S8810............. 24 W Series Numbers HM32W38500............ 35 HM32W38600............ 35 HM32W38700............ 35 HM32W39100............ 35 HM32W39200............ 35 HM32W39300............ 35 HM32W40500............ 35 HM32W40600............ 35 HM32W40700............ 35 HM32W51400............ 35 Fume Hoods, Specialty WB54L2570P0B............ 42 WB54L2571P0B............ 42 WB54L2572P0B............ 42 WB54L2573P0B............ 42 WB54L2574P0B............ 42 WB54L2591P0B............ 38 WB54L2594P0B............ 38 WB54L2597P0B............ 38 WB54L2600P0B............ 38 WB54L2735K0B............ 40 WB54L2738K0B............ 40 WB54L2739K0B............ 40 WB54L2793K0B............ 39 WB54L2797K0B............ 39 WF54L2570P0B............ 42 WF54L2571P0B............ 42 WF54L2572P0B............ 42 WF54L2573P0B............ 42 WF54L2574P0B............ 42 WF54L2591P0B............ 38 WF54L2594P0B............ 38 WF54L2597P0B............ 38 WF54L2598P0B............ 38 WF554S2707P0B........... 44 WF554S2707PSB........... 44 WF554S2710P0B........... 44 WF554S2710PSB........... 44 WF554S2713P0B........... 44 WF554S2713PSB........... 44 WF554S2716P0B........... 44 WF554S2716PSB........... 44 WN54L2570P0B............ 42 WN54L2571P0B............ 42 WN54L2572P0B............ 42 WN54L2573P0B............ 42 WN54L2574P0B............ 42 WN54L2594P0B............ 38 WN54L2597P0B............ 38 ESP Series Numbers ESPAFX93600P...55 ESPAFX94800P...55 ESPAFX96000P...55 ESP106H8320BP...54 ESP115H6320BP...53 ESP115H8320BP...53 ESP126H2220BP...53 ESP130H4220BP...53 ESP136H2320BP...54 ESP144H6320BP...55 ESP144H8320BP...55 ESP148H6320BP...54 ESP148H8320BP...54 ESP164H4320BP...54 ESP164H8320BP...53 ESP180H6320BP...54 ESP180H8320BP...54 ESP181H6320BP...54 ESP181H8320BP...54 ESP500H4020P...56 ESP500H4030P...56 ESP500H4050P...56 ESP500H4090P...56 ESP501H2220P...56 ESP502H2200P...56 ESP502H2220BP...56 ESP522H4020P...56 ESP522H4620P...56 ESP525H3080P...56 ESP525H3680P...56 ESP601H2330P...58 ESP601H6330P...58 ESP611H7220P...57 ESP611H7320P...57 ESP612H4320P...57 ESP612H8320P...57 ESP614H6320P...57 ESP616H5220P...56 ESP616H5320P...56 ESP616H6220P...56 ESP616H6320P...56 ESP616H8220P...56 ESP616H8320P...56 ESP618H0360P...58 ESP712H6330BP...58 ESP712H8330BP...58 ESP812H8920BP...58 ESP21L3036EP...59 ESP21L3036ESP...59 ESP21L3048EP...59 ESP21L3048ESP...59 ESP21L3060EP...59 ESP21L3072EP...59 ESP21L3096EP...59 ESP21L72261LFP...52 ESP22L0496EP...59 ESP30L497AWP...52 ESP30L497GWP...52 ESP30L497VWP...52 ESP32L55200P...52 ESP34L19600P...52 ESP34L24200P...60 ESP52L44300P...60 ESP52H73400P...60 ESP52H73600P...60 ESP52L77800P...60 ESP52L84400P...60 ESP52L86400P...60 ESP54LAFA05P...52 ESP54L2595P0BP...52 ESP950S7531BP...55 ESP950S7551BP...55 ESP32W40600P...60 64 www.fishersci.com

To place Quick Ship orders: 800-766-7000 Phone 800-926-1166 Fax UNITED STATES Customer service 1-800-766-7000 Phone 1-800-926-1166 Fax Clinical customer service 1-800-640-0640 Phone 1-800-290-0290 Fax Safety customer service 1-800-772-6733 Phone 1-800-772-7702 Fax Atlanta 3970 Johns Creek Ct., STE 500, Suwanee, GA 30024 Chicago 4500 Turnberry Drive, Hanover Park, IL 60133 Houston 9999 Veterans Memorial Dr., Houston, TX 77038 Pittsburgh 2000 Park Lane, Pittsburgh, PA 15238 Puerto Rico Carretera #1 Km.56.4, Barrio Montellano, Cayey, PR 00737 Fisher Scientific USA Export 3970 Johns Creek Ct., STE 500, Suwanee, GA 30024 US Export orders: 1-800-955-5090 US Export pricing: 1-800-955-2288 For other areas, please call your sales office. CANADA Ottawa 112 ch. Collonnade Rd. Nepean, ON K2E 7L6 800-234-7437 Phone 800-463-2996 Fax INTERNATIONAL Latin America, Mexico and Caribbean Fisher Scientific Latin America, Ltd. Benjamin 2935, Office 602 Santiago, Chile 011-562-224-7343 Phone 011-562-224-7357 Fax Malaysia Fisher Scientific (M) Sdn. Bhn. No. 3 Jalan Sepadu 25/123 Taman Perindustrian Axis Seksyen 25, 40400 Shah Alam Selangor, Malaysia 6(03) 522-8888 Phone 6(03) 521-8899 Fax Japan Fisher Scientific Japan, Ltd. 16-5 Nihonbashi, Kodenma-cho Chuo-ku, Tokyo 103-0001 81-3-3665-1971 Phone 81-3-3665-1976 Fax Email: fishrjpn@mxm.mesh.ne.jp 2010 Thermo Fisher Scientific Inc. All right reserved. All trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries. Specifications, terms and pricing are subject to change. Not all products are available in all countries. Please consult your local sales representative for details. AL-1737 0710 BN01051033