Item # Quantity C.S.I. Section 11400 FOOD EQUIPMENT Q SERIES MEDIUM STANDARD FEATURES Choice of finishes: Stainless steel exterior and interior; Stainless steel exterior, DuraFinish aluminum interior Galvanized back and bottom Condensing unit mounted on the top Hot gas condensate removal R134a refrigerant Solid doors are field rehingable Exterior, solar powered digital thermometer is standard on all cabinets Easily removable door gasket without the use of tools Non-standard door hinging available at no extra cost Thermal vinyl door frame design that eliminates the requirement for perimeter door heaters, which reduces operating costs 120/60/1 units have ten foot cord and plug MODELS Q1 Single section unit QD1 Single section pass-through unit Q2 Two section unit QD2 Two section pass-through unit Q3 Three section unit QD3 Three section pass-through unit OPTIONS (Continued) Pass through units Upper trim modified for soffit installation Selection of shelves Selection of facility features 6" adjustable legs with stainless steel feet Specifications, Details and Dimensions on Inside and Back. R C R OPTIONS Casters Flanged feet Utility base Half-height solid doors Half-height glass doors Full height glass doors Half-height sliding glass doors Full height sliding glass doors Stainless steel clad back Stainless steel heat barrier(s) Wall mounting bracket High capacity refrigeration system High humidity refrigeration system Remote units (condensing unit by others) Electrical connection at bottom of cabinet Fluorescent lighting 701 S Ridge Avenue, Troy, OH 45374 937-332-3000 1-800-333-7447
SELLING FEATURES DOWN DUCT AIR DISTRIBUTION SYSTEM: Ensures consistent cabinet temperatures. EASILY REMOVABLE GASKETS: Solid door gaskets are easily removed without tools for cleaning or replacement, eliminating the expense of a service call. FIELD REHINGEABLE DOOR: Maximum flexibility for layout changes. Thermal vinyl door frame design that allows replacement of perimeter door heaters, should it be necessary, which reduces operating costs. CHOICE OF TWO FINISHES: Allows customer to choose the best finish for their application. Units are available in: stainless steel exterior and interior; stainless steel exterior, DuraFinish aluminum interior with stainless steel floor. WARRANTY: The Q series cabinet warranty is for two years. It includes parts, labor, and travel during normal working hours in the continental United States. Non-prorated compressor warranty for an additional three years. REFRIGERATION SYSTEM: Unitized and located on top of the cabinet consisting of: Motor-Compressor, high starting torque, hermetic rated as follows: 1 Section - 1 4 H.P. and rated 1850 BTU at 90 F ambient and 20 F evaporated temperature. 2 Section - 1 3 H.P. and rated 2400 BTU at 90 F ambient and 20 F evaporator temperature. 3 Section - 1 3 H.P. and rated 2400 BTU at 90 F ambient and 20 F evaporator temperature. Condenser fan and fan motor. Heavy duty condenser, copper and aluminum designed to match motor compressor rating. R-134a Refrigerant and non-cfc polyurethane foam insulation. Coil fan and fan motor. Removable, insulated coil housing. Evaporator: Coated aluminum copper for long life and corrosion resistance. Temperature control. Refrigeration inside cabinet is by fan circulated air which is drawn up through vents in the ceiling, passed through cooling coils, and returned to the cabinet through Hobart louvered down-duct(s) that provide uniform cooling throughout the cabinet, regardless of the loading pattern. Also used in bakery for dough retarding.
SPECIFICATIONS CONSTRUCTION: The first letter(s) in each model number indicates the series and finish. QS: Stainless steel exterior and interior QSA: Stainless steel exterior, DuraFinish aluminum interior with stainless steel bottom After the series the sections, and if the unit is a pass-through, will be indicated by the following: D: Pass-through unit 1: One section 2: Two section 3: Three section QS SERIES Exterior: Front housing, ends and doors are No. 4 finish stainless steel. Front frame is extruded thermal plastic providing superior thermal break between the interior and exterior of the cabinet eliminating the need for anti-condensate heaters. Exterior top, back and bottom are galvanized steel. Interior: Liner is crimped construction of No. 4 finish stainless steel with 3 8" radius bends. Door drums are of one piece ABS thermoplastic. QSA Exterior: Front housing, ends and doors are No. 4 finish stainless steel. Front frame is extruded thermal plastic providing superior thermal break between the interior and exterior of the cabinet eliminating the need for anti-condensate heaters on. Exterior top, back and bottom are galvanized steel. Interior: Liner is crimped construction of DuraFinish aluminum with 3 8" radius bends. Liner bottom is No. 4 finish stainless steel. Door drums are of one piece ABS thermoplastic. HARDWARE AND FITTINGS: Heavy-duty, bumpertype door handle positioned horizontally with cylinder locks. Positive action door hinged mechanism fitted with stops, are chromium plated and are mounted to reveal full door opening when door is open past 90 degrees. Door stays open at 105 degrees, and self closes at less than 90 degrees. Solid doors are field rehingeable. Door gaskets are of smooth, high quality vinyl and are easily replaceable without the use of tools. Exterior, solar powered, digital thermometer is standard on all cabinets. PLUMBING: No plumbing connections are required. Condensate water automatically evaporated from the top of the cabinet. Water drains from refrigeration coil to a corrosion-resistant plastic tray where evaporation is assisted by the condenser fan and heat from the corrosion-resistant discharge line. INSULATION: CFC Free Polyurethane foam, poured, expanded and bonded in place, completely filling all cavities between inner and exterior surfaces of the cabinet and doors. Mean Daily Energy Consumption (KWHR) tested to ANSI/AHRAE 117: Q1 Refrigerator = 3.74 OPTIONS: Casters Flanged feet Utility base Half-height solid doors Half-height glass doors Full height glass doors Half-height sliding glass doors Full height sliding glass doors Stainless steel clad back Stainless steel heat barrier(s) Wall mounting bracket High capacity refrigeration system High humidity refrigeration system Remote units (condensing unit by others) Electrical connection at bottom of cabinet Fluorescent lighting Pass through units Upper trim modified for soffit installation Selection of shelves Selection of facility features 6" adjustable legs with stainless steel feet
FACILITY FEATURES CPF PAN FILE CP-1 PAN FILE A B ❶ BF-9 BAKER S FILE ❷ F FF-10 FOOD FILE ❸ HRW-18 ROD TYPE SLIDES NOT SHOWN ❹ ➎ CUS UNIVERSAL SLIDE ➐ ➏ 1 PAN FILE: Assembled of specially designed slides and racks that fit directly into cabinet standards. Adjustable on 1" centers. For all full and fractional size pans. A No. CFP One pair of special utility Pan File slides to hold either one 18" x 26" pan, two 12" x 20" pans, or both. B No. CP-1 One pair of standard Pan File slides to hold two 12" x 20" pans of any depth. 2 BAKER'S FOOD FILE: A complete assembly to hold up to eighteen 18" x 26" bun pans by their lips, on 3 4" centers. One assembly fits behind any half-height door, one or two behind a full-height door. Adjustments permit positive fit regardless of the make of trays or pans used. (Entire system must use same size pan.) No. BF-9 Baker's Food File assembly. Note: The special CZWF 18" x 26" wire shelf or 14" x 18" pans may also be used in the Baker's Food File. 3 FOOD FILE: Provides adjustable and removable facilities for storing standard trays: 18" x 26" one per level or 14" x 18" - two per level. Consists of four adapter wings that hook into cabinet shelf standards, plus slides that are removable and adjustable. No. FF-10 One standard Food File with ten levels of slides for 14" x 18" or 18" x 26" pans, 1" deep. One assembly can be put behind any half-height door, one or two behind a full-height door. Note: The special CZWF 18 x 26 wire shelf may also be used in the FF-10. 4 ROD-TYPE SLIDES DESIGNED SPECIFICALLY FOR BAKERY USE Easy to clean, and stay clean longer. Of course, they are removable and easily adjustable for exact fit of any standard width 18" x 26" bun pans. (Entire system must use same size pan.) ➎ WIRE SHELVES: Standard steel shelves are steel plated and sealed, crossbars on 3 4" maximum centers and are furnished complete with shelf clips and as many bonus shelves as are necessary. When additional wire shelves are required for any purpose, order: No. CZW One standard weight, plated wire shelf. No. CZWF One Food File wire shelf, same as above but 18" x 26". No. CHZW One heavy-duty steel wire shelf for bottled beverages and other extreme loads. No. CSSW One standard weight stainless steel wire shelf. ❻ PULL-OUT WIRE SHELVES: A special ball-bearing pull-out support assembly with hooks to fit into the regular cabinet shelf standards. Pull-out slides are adjustable on 1" centers and may be placed anywhere in the cabinet. No. CZWR One pair of pull-out slides with one shelf. No. CSSWR One pair of pull-out slides with one stainless steel shelf. ❼ CUS UNIVERSAL SLIDES Accommodates 12" x 20", 14" x 18", or 18" x 26" pans. SWIVEL-TYPE LOCKING CASTERS Hobart furnishes heavy duty industrial casters that swivel and roll, permitting cabinets to be moved for easier cleaning. Front casters are equipped with brake pedals and locks so that cabinets may be held in a stationary position. Casters not provided on hinged glass door units. Wheels, 5" in diameter, meet NSF requirements. All metal parts are rustproofed. No. SC Swivel-type locking casters, set of four, for field installation. STAINLESS STEEL UTILITY BASE The utility base is a rugged, stainless steel sup-port that is designed to meet NSF requirements and simplify installation when refrigeration and/or electrical lines come up through the floor. Base is 4" high and the same width as the bottom of the cabinet to which it attaches. It can be set directly on the floor or on a 2" high curb. Access plates, in the center of the front, may be removed to make or inspect connections.
DETAILS AND DIMENSIONS ELECTRICAL DATA Q1 Q2 Q3 Horsepower 1 4 Refrigerant 1 1 3 3 R134a Standard Voltage 120/60/1 Maximum Watts 430 620 645 Maximum Amps 5.6 7.7 7.9 PHYSICAL DATA Q1 Q2 Q3 Net Cubic Feet of Capacity 22.7 48.9 74.7 Interior Dimensions 59"H x 29"D x 23 1 4"W 59"H x 29"D x 50 5 8"W 59"H x 29"D x 78"W Net Square Feet of Shelf Area 17.5 40.8 63.9 Depth over Hardware Front Opening 35" Pass-Through 39" Depth over Open Doors Front Opening 58 1 2" Pass-Through 85 3 4" Net Door Opening Height 58 1 2" Net Door Opening Width 22 1 4" Approximate Shipping Weight 270 lbs. 445 lbs. 620 lbs. ELECTRICAL SYSTEMS Refrigeration: Standard electrical characteristics are 120 volts, 60 hertz, single phase. 1 Section: Condensing unit is 1 4 H.P. and consumes 390 watts at 5.0 amps. Maximum running draw is 430 watts; 5.6 amps. 2 Section: Condensing unit is 1 3 H.P. and consumes 570 watts at 7.0 amps. Maximum running draw is 6120 watts; 7.9 amps. 3 Section: Condensing unit is 1 3 H.P. and consumes 590 watts at 7.2 amps. Maximum running draw is 645 watts; 7.9 amps.
FOOD EQUIPMENT DETAILS AND DIMENSIONS As continued product improvement is a policy of Hobart, specifications are subject to change without notice. 701 S Ridge Avenue, Troy, OH 45374 937-332-3000 1-800-333-7447 F-7521 (REV. 4/01) LITHO IN U.S.A. (H-01) Printed On Recycled Paper