IEC PROJETOS EM VOTAÇÃO IEC/TC 10 - Fluids for electrotechnical applications. ATÉ 25 DE JULHO DE 2014 IEC 60599 Ed.3: Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis. IEC/TC 13 - Electrical energy measurement and control ATÉ 11 DE JULHO DE 2014 IEC 62056-4-7/Ed.2: Electricity metering data exchange - The DLMS/COSEM suite - part 4-7: DLMS/COSEM transport layer for IP networks. IEC 62056-5-3/Ed1 Am.1 Electricity Data Exchange The DLMS/COSEM SUITE - Part 5-3: DLMS/COSEM application layer. IEC 62056-6-1/Ed.1 A1: Electricity Metering Data Exchange - The DLMS/COSEM suite Part 6-1: Object identification system (OBIS) - Amendment 1. IEC 62056-6-2/Ed1 A1: Electricity Metering Data Exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface classes. IEC/TC 14 - Power transformers IEC 60076-15 Ed.2: Power transformers - Part 15: Gas-filled power transformers. IEC/TC 20 - Electric cables Amendment 1 to IEC 60332-1-1: Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus. Amendment 1 to IEC 60332-1-2: Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kw pre-mixed flame.
Amendment 1 to IEC 60332-1-3: - Tests on electric and optical fibre cables under fire conditions - Part 1-3 : Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles. IEC/TC 21 - Secondary cells and batteries ATÉ 05 DE SETEMBRO DE 2014 IEC 62877-1: Electrolyte and water for vented Lead Acid accumulators - Part 1: Requirements for electrolyte IEC 62877-2: Electrolyte and water for vented Lead Acid accumulators - Part 2: Requirements for water IEC/TC 23 - Electrical accessories ATÉ 08 DE AGOSTO DE 2014 IEC 60320-1 Ed.3: Appliance couplers for household and similar general purposes - Part 1: General requirements. IEC/TC 31 - Equipment for explosive atmospheres IEC 60079-7/Ed5: Explosive atmospheres - Part 7: Equipment protection by increased safety 'e'. ATÉ 18 DE JUHO DE 2014 IEC/IEEE 60079-30-1/Ed1: Explosive atmospheres Part 30-1: Electrical resistance trace heating- General, type testing and design requirements. IEC/IEEE 60079-30-2/Ed1: Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance. IEC/TC 33 - Power capacitors and their applications
IEC 60358-4/Ed1: Coupling capacitors and capacitor dividers - Part 4: AC and DC single-phase capacitor dividers and RC divider. IEC 60143-3/Ed2: Series capacitors for power systems - Part 3: Internal fuses. IEC/TC 34 - Lamps and related equipment IEC 62722-1 Ed.1: Luminaire performance - Part 1: General requirements. IEC 60598-2-5 Ed.3: Luminaires - Part 2-5: Particular requirements - Floodlights. IEC/TC 47 - Semiconductor devices IEC 60191-6-13 Ed.2: Mechanical standardization of semiconductor devices - Part 6-13: Design guideline of open-top-type sockets for Fine-pitch Ball Grid Array and Fine-pitch Land Grid Array (FBGA/FLGA). ATÉ 25 DE JULHO DE 2014 IEC 60747-5-6 Ed.1: Semiconductor devices - Discrete devices - Part 5-6: Optoelectronic devices - Light emitting diodes. IEC 60747-5-7 Ed.1: Semiconductor devices - Discrete devices - Part 5-7: Optoelectronic devices - Photodiodes and phototransistors. ATÉ 15 DE AGOSTO DE 2014 IEC 62779-1 Ed.1: Semiconductor devices - Semiconductor interface for human body communication - Part 1: General requirements. IEC 62779-2 Ed.1: Semiconductor devices - Semiconductor interface for human body communication - Part 2: Characterization of interfacing performances. IEC/TC 57 - Power systems management and associated information exchange ATÉ 15 DE AGOSTO DE 2014
IEC 62325-451-4 Ed.1: Framework for energy market communications - Part 451-4: Settlement and reconciliation business process, contextual and assembly models for European market IEC 62325-451-5 Ed.1: Framework for energy market communications - Part 451-5: Problem statement and status request business processes, contextual and assembly models for European market IEC 61970-452 Ed.2: Energy Management System Application Program Interface (EMS-API) - Part 452: CIM static transmission network model profiles IEC/TC 59 - Performance of household and similar electrical appliances IEC 60704-2-5 A1 Ed.2: Amendment 1 to IEC 60704-2-5 Ed.2: Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-5: Particular requirements for electric thermal storage room heaters. IEC/TC 62 - Electrical equipment in medical practice IEC TR 62354: General testing procedures for medical electrical equipment Amendment 1 to IEC 62304: Medical device software - Software life cycle processes. IEC 80601-2-71: Medical electrical equipment - Part 2-71: Particular requirements for the basic safety and essential performance of functional oximeter equipment IEC/TC 64 - Electrical installations and protection against electric shock ATÉ 11 DE JULHO DE 2014 IEC 60364-7-722: Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supply of electric vehicle
Amendment 1 to IEC 60364: Low voltage electrical installation Part 4-42: Protection for safety - Protection against thermal effects. IEC/TC 65 - Industrial-process measurement, control and automation IEC 60534-2-3 Ed. 3.0: Industrial-process control valves - Part 2-3: Flow capacity - Test procedures. IEC 60534-8-4, Ed. 3.0: Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow. ATÉ 15 DE AGOSTO DE 2014 IEC 61511-1 Ed. 2: Functional safety - Safety instrumented systems for the process industry sector - Normative (uon) Part 1: Framework, definitions, system, hardware and software requirements IEC 61511-2 Ed. 2: Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1 - Informative IEC 61511-3 Ed. 2: Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels - Informative IEC/TC 66 - Safety of measuring, control and laboratory equipment IEC 61010-031 Ed.2: Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test IEC/TC 69 - Electric road vehicles and electric industrial trucks ISO/IEC17409/Ed.1: Electrically propelled road vehicles - Connection to an external electric power supply - Safety requirements.
IEC/TC 77 - Electromagnetic compatibility ATÉ 11 DE JULHO DE 2014 IEC 61000-4-36: Electromagnetic Compatibility (EMC) - Part 4-36: Testing and measurement techniques - IEMI Immunity Test Methods for Equipment and Systems IEC/TC 79 - Alarm and electronic security systems ATÉ 08 DE AGOSTO DE 2014 IEC 60839-5-2 Ed.2: Alarm and electronic security systems - Part 5-2: Alarm transmission systems - Requirements for Supervised Premises Transceiver (SPT) IEC 60839-5-3 Ed.1: Alarm and electronic security systems - Part 5-3: Alarm transmission systems - Requirements for Receiving Centre Transceiver (RCT) IEC/TC 82 - Solar photovoltaic energy systems ATÉ 25 DE JULHO DE 2014 IEC 61215-1 Ed.1: Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Requirements for testing IEC 61215-1-1 Ed.1: Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules IEC 61215-2 Ed.1: Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 2: Test procedures IEC/TC 85 - Measuring equipment for electrical and electromagnetic quantities IEC 62792: Electroshock weapon measurement method. IEC/TC 86 - Fibre optics
IEC 61300-3-35/Ed2: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers IEC 60794-1-21/Ed1: Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical Tests MethodS. IEC 60794-4-10/Ed2: Optical fibre cables - Part 4-10: Family Specification - OPGW (Optical Ground Wires) along electrical power lines. IEC 60794-3-10/Ed3: Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly buried or lashed aerial optical telecommunication cables. IEC 62150-3/Ed2: Fibre optic active components and devices - Basic test and measurement procedures - Part 3: Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces IEC 62148-18/Ed1: Fiber optic active components and devices: package and interface standards - Part 18: 40-Gbit/s serial transmitter and receiver components for use with the LC connector interface ATÉ 05 DE SETEMBRO DE 2014 IEC 61290-1-1/Ed3: Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method. IEC/TC 91 - Electronics assembly technology ATÉ 05 DE SETENBRO DE 2014 IEC 61249-2-43 Ed.1: Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogen epoxide cellulose paper/woven E- glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly IEC 61249-2-44 Ed.1: Materials for printed boards and other interconnecting structures - Part 2-44: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-
glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly IEC/TC 100 - Audio, video and multimedia systems and equipment IEC 62379-3 Ed.1.0: Common control interface for networked digital audio and video products - Part 3: Video (TA 4). IEC/TC 116 - Safety of motor-operated electric tools IEC 62841-3-10/Ed1: Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines IEC/TC 121 - Switchgear and controlgear and their assemblies for low voltage ATÉ 08 DE AGOSTO DE 2014 Amendment 2 to IEC 60947-3 Ed.3: Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units.