IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. The most updated information on this Certificate of Listing is available online at pld.iapmo.org Effective Date: not available 11522 Pagemill Road Dallas, TX 75243 Identification: All sinks and lavatories shall be permanently marked to identify the manufacturer, private brand name or trademark. The product shall also bear the cupc certification mark. Characteristics: Copper or aluminum alloy sinks and lavatories to be installed per the manufacturer's instructions and the latest edition of the Uniform Plumbing Code. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC 17025. Products are in compliance with the following code(s): Uniform Plumbing Code (UPC ) National Plumbing Code of Canada Products are in compliance with the following standard(s): This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing.
IGC 194-04a MODELS: Kitchen Sinks SC-WIN-22 SC-WDE-22 SC-WIN-25 SC-WIN-30 SC-WIN-33 SC-WINR-33 SC-WIN-36 SC-WDE-33 SC-WD64-33 SC-WD64-36 SC-NTS-33 SC-NTD-33 SC-HPT-22 SC-HPT-25 SC-HPT-30 SC-HPT-33 Kitchen sink rectangle 22"x 18"x 7" deep with a 2" continuous flange Kitchen sink rectangle 22"x 18"x 7" deep with a 2" continuous flange. Inside dims: 9" x 13" each side Kitchen sink rectangle 25"x 22" x 9-3/8"deep with a 2" continuous flange Kitchen sink rectangle 30"x 22" x 9-3/8"deep with a 2" continuous flange Kitchen sink rectangle 33"x 22" x 9-3/8"deep with a 2" continuous flange Kitchen sink rectangle 33"x 24" x 9-3/8"deep with a 2" continuous flange. Rounded Front Kitchen sink rectangle 36"x 22" x 9-3/8"deep with a 2" continuous flange Double compartment kitchen sink that is rectangle shape, 33"x 22", right side is 16" x 11-1/2" x 9-1/4" deep; the left side is 18" x 16-3/8" x 9-1/4" deep Double compartment kitchen sink that is rectangle shape, 33"x 22", right side is 17"x 18"x 9-1/4" deep; the left side is 11"x 16"x 9-1/4" deep Double compartment kitchen sink that is rectangle shape, 36"x 22", right side is 19"x 18"x 9-1/4" deep; the left side is 12"x 11"x 9-1/4" deep Kitchen sink rectangle 33"x 22"/24" x 10"deep with a 2" continuous flange Kitchen sink rectangle 33"x 22"/24" x 10"deep with a 2" continuous flange. 12"x 16" x 9-3/8 left, 16"x 19"x 9-3/8" rt Kitchen sink rectangle 22"x 16"x 7" deep with a 2" continuous flange unit has 3-9/16" center outlet Kitchen sink rectangle 25"x 22" x 9-3/8"deep with a 2" continuous flange Kitchen sink rectangle 30"x 22" x 9-3/8"deep with a 2" continuous flange Kitchen sink rectangle 33"x 22" x 9-3/8"deep with a 2" continuous flange
Kitchen Sinks (cont.) SC-WTB-33 SC-VAN-33 SC-HPT-36 SC-WTB-36 SC-VAN-36 SC-HDE-33 SC-HPTBF-33 SC-HD64-33 SC-WDE-36 SC-WD64-33 SC-HPT-36 SC-HD64-36 Kitchen sink rectangle rounded front 33"x 24" x 9-3/8"deep with a 2" continuous flange Kitchen sink rectangle rounded front with flat sides 33"x 24" x 9-3/8"deep with a 2" continuous flange Kitchen sink rectangle 36"x 22" x 9-3/8"deep with a 2" continuous flange Kitchen sink rectangle rounded front 36"x 24" x 9-3/8"deep with a 2" continuous flange Kitchen sink rectangle rounded front with flat sides 36"x 24" x 9-3/8"deep with a 2" continuous flange Double compartment kitchen sink that is rectangle shape, 33"x 22", right side is 13.5" x 18" x 9-1/4" deep; the left side is 13.5" x 18" x 9-1/4" deep Double compartment kitchen sink that is rectangle shape with butterfly back, 33"x 22", right side is 13.5" x 18" x 9-1/4" deep; the left side is 13.5" x 18" x 9-1/4" deep Double compartment kitchen sink that is rectangle shape, 33"x 22", right side is 17"x 18"x 9-1/4" deep; the left side is 11"x 16"x 9-1/4" deep Double compartment kitchen sink that is rectangle shape, 36"x 22", right side is 15"x 18"x 9-1/4" deep; the left side is 15"x 18"x 9-1/4" deep Double compartment kitchen sink that is rectangle shape, 33"x 22", right side is 17"x 18" x 9-1/4" deep; the left side is 11"x 16"x 9-1/4" deep Double compartment kitchen sink that is rectangle shape, 36"x 22", right side is 15"x 18"x 9-1/4" deep; the left side is 15"x 18"x 9-1/4" deep Double compartment kitchen sink that is rectangle shape, 36"x 22", right side is 19"x 18"x 9-1/4" deep; the left side is 12"x 11"x 9-1/4" deep Designs on Apron: WV-Wabash, HPF-Hand Painted Flowers, FRT-Fruit Swag, PCN-Pinecones, LVS-Leaf, FRM-Animal Farm, CTF-Country Farm, KC-Norwich, RVT-Saxon, DDS-Dada Scroll, RYS-Royal Scroll, IMS-Iman Scroll, LIO-Lyonesse Scroll, GVN-Grapes on Vine, BLF-Blossoming Flowers, SRL-Winged Scroll, VTS-Victorian Scroll. Designs on Apron: FDE-Fleur De Lis, LIO-Lion Head Scroll, DAS-Dada Scroll, FFS-Fruit and Floral Scroll, WGS-WInged Scroll, GVE-Grapevine, CLP-Clavo Panels, FWS-Flower Scrol, CHS-Cherub Scroll,
FLS-Floral Scroll, CWS-Crown Scroll, ORS-Ornate Scroll. Trough Sinks SC-ALG-30 SC-CHP-17 SC-CHP-24 SC-CHP-35 SC-CHP-45 SC-CHPR-45 SC-CHPD-45 SC-YK-40 SC-ALG-50 Retangle Kitchen Trough- 30" x 11" x 2.75"to 5.5" deep with a 2" or 3-5/8" end Retangle Kitchen Trough- 17" x 10" x 6" deep with a 2" or 3-5/8" center Retangle Kitchen Trough- 24" x 10" x 6" deep with a 2" or 3-5/8" center Retangle Kitchen Trough- 35" x 10" x 6" deep with a 2" or 3-5/8" center Retangle Kitchen Trough- 45" x 10" x 6.5" deep with a 2" or 3-5/8" center Retangle Kitchen Trough- 45" x 10" x 6.5" deep with a 2" or 3-5/8" center Retangle Kitchen Trough- 45" x 10" x 6.5" deep with a 2" or 3-5/8" center Half Round Kitchen Trough- 44" x 11" x 5" deep with a 1-5/8", 2" or 3-5/8" center Rectangle Kitchen Trough- 50" x 11" x 2.75"to 6" deep with a 2" or 3-5/8" End Bar Sinks SC-SON-13 SC-SON-15 SC-SON-18 SC-BOS-15 SC-BOS-18 SC-BOSR-15 Square bar sink 13''x 6.5''deep, unit has a 2" center outlet. Unit has a 1-in continuous flange Square bar sink 15''x 7''deep, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Square bar sink 18''x 7.5''deep, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Square bar sink 15"x 6" deep, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Square bar sink 18"x 7" deep, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Rectangle bar sink 16"x 12"x 6.5" deep, unit has a 2" or 3-9/16"
SC-SHA-19 SC-TRN-10 SC-TRN-16 SC-TRND-16 SC-TRN-19 SC-SHO-16 SC-SHOA-16 center outlet. Unit has a 1.5-in continuous flange Rectangle bar sink 18"x 13"x 6" deep, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Round bar sink 10''x 5''deep, unit has a 2" center outlet. Unit has a 1-in continuous flange Round bar sink 16''x 7''deep, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange. Designs included: INF-Infinity Sun, G-Grapes, F-Floral Round bar sink 16''x 14" x 7''deep, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Round bar sink 19-1/4 x 8" deep with a 1-1/8" continuous flange, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Hex bar sink 16"x 7" deep with a 1-1/8" continuous flange, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Hex bar sink 16"x 7" deep 3.5" apron, with a 1-1/8" continuous flange, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Rectangle bar sink 21"x 15.25"x 9" deep, unit has a 2" or 3-9/16" center outlet. Unit has a 1-in continuous flange Lavatory Sinks SC-CL-11 SC-CL-15 SC-CL-17 SC-HER-17 SC-CBG-12 SC-OOV-13 SC-OOV-15 SC-OOV-17 SC-CZO-12 SC-CZO-16 11" x 8-1/4"x 8-1/4" x 2-1/2" deep, center outlet 1-5/8", no overflow is provided on unit tested. Designs included: 15"x 12.25"x 5" deep, center outlet 1-5/8". Designs included 17"x 15"x 5" deep, center outlet 1-5/8". Designs included 17-1/2" x 14-1/8" x 5"deep, with a 1" continuous flange, unit has a center outlet 1-5/8". No overflow is provided on tested. Designs included 12"x 4.25" center outlet 1-5/8". Designs included Oval lavatory vessel-13"x 10.25"x 5" deep, center outlet 1-5/8" Oval lavatory vessel-15"x 12"x 5" deep, center outlet 1-5/8" Oval lavatory vessel-17"x 12"x 5" deep, center outlet 1-5/8" Round lavatory vessel-12"x 12"x 4" deep, center outlet 1-5/8". Copper Handles extend out 1.5" each side Round lavatory vessel-16"x 5" deep, center outlet 1-5/8". Copper Handles extend out 1.5" each side
SC-CZOD-16 SC-CBG-15 SC-CBG-17 SC-CRS-17 SC-CHE-17 SC-OR-17 SC-OR-14 SC-BMG-12 SC-FRV-13 SC-FRV-16 SC-STM-16 SC-BLR-13 SC-ARM-14 SC-ARD-16 SC-ARR-16 SC-OOV-13 SC-OOV-15 SC-OOV-17 SC-CLF-17 SC-RBV-17 SC-ARS-16 SC-ARS-14 SC-CL-19 SC-HER-19 SC-MC-21 SC-SVN-20 SC-CIM-16 SC-CBF-19 SC-REG-20 Deep-Round lavatory vessel-16"x 7" deep, center outlet 1-5/8". Copper Handles extend out 2" each side 15"x 6" center outlet 1-5/8". Designs included 17"x 7" center outlet 1-5/8". Designs included 17"x 9" center outlet 1-5/8". Designs included 17"x 17"x 7" deep, 1-1/2" apron. Center outlet 1-5/8" 16"x 16"x 7" deep, 3-1/2" apron. Center outlet 1-5/8" 13.4"x 5" deep, 3-1/2" apron. Center outlet 1-5/8" Round lavatory double thick vessel- 15"x 7" deep, Double thick bowl. Center outlet 1-5/8" Round lavatory vessel- 13"x 13"x 3.5" deep, Center outlet 1-5/8" Round lavatory vessel- 16"x 16"x 4.5" deep, Center outlet 1-5/8" Round lavatory vessel- 8"x 8"x 3.5" deep, Center outlet 1-5/8" Round lavatory vessel- 11.5"x 6" deep, Center outlet 1-5/8" Round lavatory vessel- 16"x 16"x 6" deep, Center outlet 1-5/8" Round lavatory vessel- 13"x 13"x 6" deep, Center outlet 1-5/8" Round lavatory vessel- 14"x 14"x 4" deep, Center outlet 1-5/8" Round lavatory vessel- 16"x 16"x 6" deep, Center outlet 1-5/8" Round lavatory vessel- 16"x 16"x 3.5" deep, Center outlet 1-5/8" Oval lavatory vessel- 13" x 10" x 3", Center outlet 1-5/8" Oval lavatory vessel- 15.5"x 12.5"x 5.5", Center outlet 1-5/8" Oval lavatory vessel- 17.5"x 12.5"x 5", Center outlet 1-5/8" Square lavatory- 17.5"x 5" Center - 6" Ends, Center outlet 1-5/8" Square lavatory vessel 17"x17"x4.5" Center outlet 1-5/8". 4.5" apron 16"x 16"x 3.5" Center outlet 1-5/8" 15"x 15"x 5" deep, Center outlet 1-5/8" 19"x 14"x 5" deep, center outlet 1-5/8". Designs included 17"x 14"x 5" deep, center outlet 1-5/8". Designs included 21"x 14"x 5" deep, 1.5" apron, center outlet 1-5/8" 20"x 17''x 5" deep, 3.5" apron, center outlet 1-5/8" 18"x 12"x 4.5"/6.25" deep, center outlet 1-5/8" 21"x 14"x 5.5" deep, 1-1/2" apron. Center outlet 1-5/8" 20.5"x 17.75"x 5", 3.5" apron. Center outlet 1-5/8".2 SUFFIX DESIGNS FOR LAV SINKS: BWR-Barbwire, RPL-Ripple, FBD-Floral Band, FDI-Fleur De Lis, HRH-Horse Head, HSO-Horseshoes, FLV-Floral Vine, RIB-Ribbed, FRN-Fernale, SCL-Scallop, BLK-Block, STR-Stars, FLS-Floral Swag, JNR-Joining Rings, BBQ-Baroque, IFS-Infinity Sun, BRD-BullRider,
PCO-Pinecone, LRH-Longhorn, FRG-Frog, DFY-Dragonfly SUFFIX DESIGNS FOR BAR SINKS: GVN-Grapevine, OLV-Olive Branch, PCN-Pinecone, BBQ-Baroque, GRP-Grapes, STR-Star, TXS-Texas Star, LCV-Lucky Clover, FSH-Fish, GKO-Gecko, FRG-Frog, HRH-Horse Head, FLE- Flure De Lis, IFS-Infinity Sun, DRY-Dragonfly, PIN-Pinecones