A World of Solutions in Fire Protection Systems

A World of Solutions in Fire Protection Systems

FireWarden-50C Single Data Communications Loop DCLA, DCLB, DCLC Loop has 50 addressable device capacity in any combination of addressable detectors and modules Two independently programmable Class A or Class B Notification Appliance Circuits (NACs) Enhanced drift compensation, maintenance alert and auto detector test features New annunciator protocol with connections for up to eight remote devices, including 80-character LCD annunciators, remote printers, relays and graphic annunciators Built-in Digital Alarm Communicator Transmitter (DACT) with remote upload/download programming and diagnostic capability (requires VFWarden-CD) Multi-module series: NC-100-6A, NMM-100-10A, NC-100R-6A, NZM-100-6A i3 Photo NZM-100A 2-Wire NOT-BG12LX Addressable Manual Pull Station NH-100A Series Thermal NI-100A Addressable Devices NC-100A Control Module NMM-100A/NMM-100PA Multi-module Series DNRA Duct To Central Station Over Telephone Network 24 VDC DCL Loop ANN BUS NP-100A Photo NDM-100A Dual FireWarden-50C Fire Alarm Control Panel ANN-80C N-ANN-LED FireWarden-100C Single Data Communications Loop DCLA, DCLB, DCLC Supports 198 addressable points (99 detectors/99 modules) 80-character LCD Backlit Display (4 lines x 20 characters) Four NACs with built-in synchronization Built-in Digital Alarm Communicator Transmitter (DACT) Fully programmable from local keypad, local PS-2 keyboard or PC via VFWarden Windows Programming Utility Enhanced drift compensation, maintenance alert and auto detector test features /ANN-BUS interface supports up to 32 ACS Series annunciators or up to eight ANN-BUS devices Multi-module series: NC-100-6A, NMM-100-10A, NC-100R-6A, NZM-100-6A i3 Photo NZM-100A 2-Wire NOT-BG12LX Addressable Manual Pull Station NH-100A Thermal NI-100A Addressable Devices NC-100A Control Module NMM-100A/NMM-100PA Multi-module Series DNRA Duct To Central Station 24 VDC DCL Loop NP-100A Photo NDM-100A Dual ANN-BUS or ACS (one or the other) Terminal Mode FireWarden-100C Fire Alarm Control Panel FDU-80C ACS Annunciator

NSP-25C Panel Twenty-five DCL points Two amp power supply Two class B NACs Spartan HFS family of devices Five zones Built-in dialer LEDs for system status; alarm, trouble, supervisory, etc. Uses Windows Internet Explorer for programming via laptop Ethernet port UL/ULC/ETL listed Addressable Devices NOT-BG12LX Addressable Manual Pull Station HFS-TA Thermal HFS-MRA Relay Module NSP-25C Fire Alarm Control Panel HFS-PTA Photo/Thermal HFS-DA Duct To Central Station Over Telephone Network DCL Loop HFS-PA Photo HFS-MMA Conventional Panels RP-2001C Supression Control Panel Deluge-Preaction Designed for sprinkler standards NFPA 13, 15 and 16 Dual hazard operation Adjustable waterflow discharge timer and two soak timers Cross-zone (double-interlock) capability Six programmable Class B Initiating Device Circuits (IDCs) Four programmable Class B output circuits - (special application power) Built in Strobe synchronization 7.0 amps total 24 VDC output current 80-character LCD display (backlit) Disable/Enable control per input zone and output zone Built-in Programmer SFP-5UDC 5-Zone Control Communicator and SFP-10UDC 10-Zone Control Communicator SFP-5UDC has 5 Programmable Class B Initiating Device Circuits (IDCs) SFP-10UDC has 10 programmable Class B Initiating Device Circuits (IDCs) 4 Class B Notification Appliance Circuits (NACs) Optional CAC-5X Class A converter module for NAC s and IDCs (2 required) 7 amps of NAC power Programmable NACs Built-in strobe synchronization Built-in Digital Alarm Communicator/Transmitter, LCD display and keypad Built-in programmer 24VDC RP-2001C SFP-5UDC SFP-10UDC RP-2002C Supression Control Panel Agent Release Designed for agent releasing standards NFPA 12, 12A, 12B, and 2001 Disable/Enable control per input zone and output zone Dual hazard operation Adjustable pre-discharge, discharge and waterflow delay timers RP-2002C Cross-zone (double-interlock) capability Six programmable Class B Initiating Device Circuits (IDCs) Four programmable Class B output circuits - (special application power) Built in Strobe synchronization 7.0 amps total 24 VDC output current Built-in Programmer 80-character LCD display (backlit) CFP-2401B 1-Zone Control and CFP-2402B 2-Zone Control CFP-2401B has 1 Class B Initiating Device Circuit (IDCs) CFP-2402B has 2 Class B Initiating Device Circuits (IDCs) CFP-2401B 1 Class B built-in NAC IDCs support normally-open contact devices and two-wire detector 1.25 amps of NAC power NAC features 60-second Silence Inhibit, standard Alarm and Trouble, Form-C relays standard Fuseless, power-limited technology meets all the latest ULC power-limiting requirements CFP-2402B CFP-2410B 10-Zone Control 10 Initiating Device Circuits (IDC) - All zones accept two-wire smoke detectors and any normally-open contact devices - Zones 1-8 configured as general alarm zones - Zones 9 and 10 programmable as smoke zones or supervisory alarm zones 2 built-in, programmable NACs 2.5 amps of NAC power, expandable to 5.0 amps 3.6 amps of total system power expandable to 6.6 amps Alarm, Trouble and Supervisory, Form-C relays standard CFP-2410B

ONYX Series NFS-320C ONYX NFS-320C Intelligent Single Loop Fire Alarm Control Panel One Data Communications Line (DCLA, DCLB, DCLC) with 318 devices Point Capacity: Up to 159 detectors (any mix of ion, photo, laser photo, thermal, or multisensor) and 159 modules (N.O. manual stations, two-wire smoke, notification, or relay) 6.0 Amp power supply with four Class A/B built-in Notification Appliance Circuits (NACs) Fully field programmable with 80-character display (includes QWERTY keypad) or offline with VeriFire TM Tools Windows-based program utility USB Support for VeriFire Tools Removable chassis design for easy installation and service interface supports up to 32 annunciators ONYX Intelligent Sensing advanced set of software algorithms delivers rapid, intelligent response to incipient fire signatures, while substantially reducing nuisance alarms Networkable with NOTI FIRE NET (NFN), High Speed NOTI FIRE NET, and ONYXWorks up to 200 nodes per NFN Listed for releasing Available in French FSP-851A Photo FAPT-851A Acclimate Plus FSI-851A FSL-751A VIEW TM (Terminal) DNRA Duct FST-851A Thermal LCD2-80 ACM-24AT FSC-851A IntelliQuad TM Multicriteria XP Series Multi-module CO1224A FZM-1A 2-Wire i3 Photo Gas RSG Manual Pull Station ACPS-610 Addressable Charger Power Supply PF24VA ExitPoint TM Intelligent Devices Built for Speed

ONYX Series NFS2-640 ONYX NFS2-640 Intelligent 1 to 2 Loop Fire Alarm Control Panel One Data Communications Line (DCLA, DCLB, DCLC), expandable to two Point Capacity: Up to 159 detectors (any mix of ion, photo, laser photo, thermal, or multisensor) and 159 modules (N.O. manual stations, two-wire smoke, notification, or relay) per DCL 318 devices per DCL, 636 devices per panel 80-character, 640-character, or displayless options ONYX Intelligent Sensing - nine levels of sensitivity, drift compensation and maintenance alert, and auto detector test 6.0 Amp power supply with four Class A/B built-in Notification Appliance Circuits (NACs) Fully field programmable with 80-character display (includes QWERTY keypad) or offline with VeriFire TM Tools Windows- based program utility Optional Integrated Digital Voice Command with eight channels of high quality digital audio on a single cable Unique environment detection includes VIEW for clean environments, IntelliQuad TM for detection of all four fire signatures, and Acclimate Plus TM multi sensor that adjusts sensitivity automatically Networkable with NOTI FIRE NET (NFN), High Speed NOTI FIRE NET, and ONYXWorks up to 200 nodes for NFN Listed for releasing Available in French Digital or Analog Audio Loop* FSP-851A Photo FSI-851A FAPT-851A Acclimate Plus FSL-751A VIEW Integrated Digital Voice Evacuation Digital Audio Amplifier* Speaker Circuit Firefighter Telephone Circuit *640 must have an NCA-2 (not shown) to support Digital Voice Evacuation DNRA Duct FST-851A Thermal ACM-24AT FDU-80C XP Series Multi-module FSC-851A IntelliQuad Multicriteria CO1224A FZM-1A 2-Wire i3 Photo Gas RSG Manual Pull Station ACPS-610 Addressable Charger Power Supply PF24VA ExitPoint Intelligent Devices Unparalleled Agility

ONYX Series NFS2-3030 ONYX NFS2-3030 - Intelligent 1 to 10 Loop Fire Alarm Control Panel Up to 10 Data Communications Lines (DCLA, DCLB, DCLC) Point Capacity: Up to 159 detectors (any mix of ion, photo, laser photo, thermal, or multisensor) and 159 modules (N.O. manual stations, two-wire smoke, notification, or relay) per DCL Large 640-character LCD backlit display (16 lines x 40 characters) or displayless (a node on a network) Networkable with NOTI FIRE NET (NFN), High Speed NOTI FIRE NET, and ONYXWorks compatible up to 200 nodes for NFN Application code is saved in Flash memory Built-in Degraded Mode option. In the event of a CPU failure, the loop control modules will continue to monitor fire alarm conditions ONYX Intelligent Sensing advanced set of software algorithms delivers rapid, intelligent response to incipient fire signatures, while substantially reducing nuisance alarms including nine levels of alarm and pre-alarm, cooperative sensing and self-optimizing pre-alarm Optional integrated Digital Voice Command with eight channels of high quality digital audio and five channels of fire fighter s telephone, all on a single riser annunciators, including custom graphics FM6320 approved gas detection system Listed for releasing Available in French Audio Risers Phone Risers FSP-851A Photo FSI-851A FAPT-851A Acclimate Plus FSL-751A VIEW LCD-160 Display LCD2-80* SCS Smoke Control Station Custom Graphics Annunciator ACM-24AT DNRA Duct FST-851A Thermal Digital or Analog Audio Loop Speaker Circuit Firefighter Telephone Circuit XP Series Multi-module Digital Audio Amplifier To XPIQ Transponder FSC-851A IntelliQuad Multicriteria RSG Manual Pull Station FZM-1A 2-Wire Monitor Module ACPS-610 Addressable Charger Power Supply CO1224A i3 Photo Digital Audio Amplifier PF24VA ExitPoint Speaker Circuit Firefighter Telephone Circuit Integrated Digital Voice Evacuation Intelligent Devices FMM-4-20A Gas * RDP port can support LCD-160 or LCD2-80 in Terminal Mode, but not both at the same time Sheer Power and Performance

Networking and Integration NOTI FIRE NET TM Features Supports ONYX Series (NFS-320C, NFS-640, NFS2-640, NFS-3030, NFS2-3030) and Digital Voice Command Backward compatible to NOTIFIER classic series of Fire Alarm Control Panels (AFP-200, AFP-400, AFP-1010 and AM2020) Network Control Annunciator (NCA) is used to annunciate network events, and provide network control BACnet Gateway supports industry standard BACnet/IP connectivity to Building Automation Systems (BAS/BMS) NOTI FIRE NET Web Server (NWS) provides remote read status capabilities and instant email and text messaging ONYX FirstVision intuitive touch screen display for first responders Wire and Multi-Mode Fiber options High Speed NOTI FIRE NET TM Features Supports ONYX Series (NFS-320C, NFS-640, NFS2-640, NFS-3030, NFS2-3030), NCA-2 and Digital Voice Command Supports BACnet Gateway, NWS and FirstVision Applications Increased network protocol communications; 12Mb VDSL for Wire and 100Mb for Multi-Mode Fiber and Single-Mode Fiber Increased node count to 200 nodes including digital audio applications ONYXWorks Features Supports a client-server technology based on Echelon and a NOTI FIRE NET peer-to-peer network Integrates competitive Fire Alarm Control Panel interfaces, security panels and CCTV applications Connects new and existing equipment into a Local Area Network (LAN) or Wide Area Network (WAN) Supports Digital Alarm Communicator Receiver (DACR) interface for monitoring of remote panels Graphic Editing mode allows for onsite programming of floor plan screens, devices and navigational buttons Windows XP Support Echelon Network Printer CCTV Integration Ademco Vista Security NOTIFIER Fire Panels Competitive Fire Interface IP DACR NOTIFIER Fire Panels FirstVision TM Telco Lines DACR Fire and Security Panels with DACT NCA-2 ONYXWorks Workstation NOTIFIER Fire Panels FirstVision TM NWS Additional Network Literature Network & Integrated Product Brochure ONYXWorks Integrated Facilities Monitoring System Brochure Unified Command and Control

NOTIFIER 10 Whitmore Road, Woodbridge Ontario L4L 7Z4 Canada Tel: 1-905-856-8733 Toll Free: 1-888-289-1114 Fax: 1-905-856-9687 For additional offices in Canada, visit www.notifier.com All NOTIFIER products in this catalogue are ULC listed. For over 60 years, NOTIFIER has been a leader in the fire alarm industry. Today, we are the largest manufacturer of engineered fire alarm systems with over 400 distributors worldwide, and regional support operations on every continent to ensure we provide the flexibility and options your business needs. NOTIFIER - Leaders in Life. Safety. Technology. M-B-PI2-CAN 3/11