Water Heater Product Line Brochure

Water Heater Product Line rochure

Lochinvar, LL 300 Maddox Simpson Parkway Lebanon, Tennessee 37090 P: 615.889.8900 / F: 615.547.1000 www.lochinvar.com

The Innovator In Water Heating Technology From the tiny 2 gallon Jr. Electric to the innovative RMOR X2, Lochinvar water heaters are noted for their range of features and application flexibility. ollectively, they represent the most complete product line in the industry, from a company with a long history of innovation and a reputation for excellence. You ll find there s a Lochinvar product for any application imaginable from standard residential units to the advanced opper Fin II with proportional firing. nd with selection, comes opportunity. In fact, the diversity and performance of our product line is surpassed only by its quality in design, construction, and training. Lochinvar quality is reinforced by our world class manufacturing plant, commitment to research and development and unparalleled industry training available at Lochinvar University. Quality, efficiency, features, service, and selection. For more than 85 years, these have been the hallmarks of Lochinvar products. Lochinvar... the innovator in water heating technology. Lochinvar water heaters are compliant to the national Safe Drinking Water ct (42 US 300g) for Low Lead ontent. Per the requirement, all water heating product sold into commerce must be compliant by January 4, 2014. This logo represents that a product has a NOx rating which exceeds the requirements of the South oast ir Quality Management District and Texas National Resource onservation ommission. This ingot means the Stack Frame is available for use with that product. See page 43 & 44 for details. This catalog is designed to provide a convenient, condensed overview of the entire Lochinvar water heater line. For a complete list of features, specifications and technical data on a particular product, see your manufacturer s representative or contact Lochinvar. Every Lochinvar product is designed and built to meet or exceed the fuel efficiency and safety standards of one or more of these agencies, wherever applicable. ontents 1 RMOR X2 TM 3 RMOR 5 RMOR Wall Mount 7 SHIELD 9 Power-Fin 11 opper-fin II 13 opper-fin 15 Efficiency+ 16 Efficiency Pac 17 opper-fin etter Idea 18 Low NOx harger 18 Ultra Low NOx harger 19 Multi-Flue harger 20 Light Duty harger 21 ustom Hi-Power 23 Standard Hi-Power 25 ompact SME Hi-Power 26 Light Duty ommercial 27 Hot Water Generators 29 Squire Indirect Water Heaters 30 Solar Stainless Steel Indirect Water Heaters 31 Lock-Temp Round Jacketed Storage Tanks 32 Lock-Temp Square Jacketed Storage Tanks 32 Lock-Temp Stainless Steel Storage Tanks 31 Lock-Temp are Storage Tanks 34 Energy Saver Residential Gas 35 Specialty Residential Gas 36 Ultra Low NOx Residential 37 Power Vented Residential 38 Power Direct Vent Residential 39 Residential Electric 40 Junior Electric 41 Manufactured Home 42 Solar 43 Stack Frame HLW

1 RMOR X2 1,000,000 to 1,500,000 tu/hr Models Innovation for ommercial Water Heating Lochinvar s commitment to research and development once again brings new innovation to the industry! The RMOR X2 ommercial Water Heater combines stainless steel heat exchanger technology with Modulating ondensing combustion to deliver efficiencies as high as 96%. With models at 1.0, 1.3 and 1.5 million TU/hr inputs, RMOR X2 will serve a large range of commercial applications and add the green touch that building owners and facility managers desire. Fully Modulating with 10:1 Turndown With unparalleled modulation capabilities the RMOR X2 boasts a turndown ratio of 10:1. This means that at times when the hot water demand requires less than the full input capabilities of the water heater, RMOR X2 will deliver the proper amount of heat to exactly match the demand with inputs as low as 10% of the maximum water heater input. ouple the RMOR X2 with a Lock-Temp Storage tank for long system life and high performance. ll Lock-Temp storage tanks are equipped with the patented Lock-Temp baffle. This baffle isolates the turbulence of incoming water thus allowing the tank to be a constant temperature throughout, this feature allows for an industry best 80% tank drawdown. If foot print, installation costs or final installed appearance are of great concern consider allowing Lochinvar to create a custom water heater package for your application. Each package is custom built, factory assembled and tested to the meet the requirements of the job. ll packages include a welded I-beam skid which houses the water heater plant and associated storage tank(s) for ease of maneuverability and installation. The RMOR X2 ombustion System dvanced Negative Regulation Technology RMOR X2 safely and reliably operates with supply gas pressure as low as 4 inches water column, because Negative Regulation (Neg/Reg) technology automatically adjusts fan speed to ensure the correct volume of fuel and air entering the burner. Fail-Safe Direct-Spark Ignition With each call for heat, two electrodes ignite the fuel/gas mixture. third electrode then senses for flame. SMRT TOUH will lock out and display the fault if ignition does not occur. Two-in-One Stainless Steel Heat Exchanger primary heat exchanger combined with a secondary heat exchanger captures flue gas heat and eliminates low temperature protection requirements. The stainless steel, ph-tolerant design features a weld-sealed assembly with no O-rings or gaskets. The RMOR X2 is SME Section IV approved and stamped. Fully Modulating urner SMRT TOUH allows fully modulating combustion with 10:1 turndown. The combustion system can fire as low as 10% of maximum input, and modulates the firing rate up to 100% as demand increases. The burner design incorporates a woven steel mesh sleeve over a stainless steel burner tube and fires in a 360 pattern along the entire length of the primary heat exchanger. These together allow RMOR X2 s compact size to excel compared to units with larger multiple burners. The full-color Lochinvar SMRT TOUH Main Menu screen is your gateway to complete control of all RMOR X2 functions, and total access to system performance data and history. Do it all and see it all right here, with or without connecting to a separate P using Lochinvar SMRT TOUH software. Modbus ommunication Password Security Product Service Indicator Freeze Protection Low Water Flow Indicator Night Temperature Setback uilding Management System ontrol Tank Temperature Readout Water Heater ontrols P onnection Flexible Venting Options - Up to 100 feet of air intake and 100 feet of exhaust vent with PV, PV, Polypropylene or Stainless Steel. Room ir Vertical Room ir Sidewall Direct Vent Sidewall Direct Vent Vertical Vertical w/sidewall ir

2 RMOR X2 1,000,000 to 1,500,000 tu/hr Models Dimensions & Specifications GPH @ Model tu/hr Thermal 100 Number Input Efficiency Rise WN1000PM 1,000,000 96.0% 1,164 WN1300PM 1,300,000 96.0% 1,513 Inlet Outlet Gas Water Water ir Vent Shipping D E F onn. onn. onn. Inlet Size Wt. (lbs.) 58-3/4 31 48 35 4-1/2 15 1-1/2 2 x 2 3 6 6 910 58-3/4 31 52-1/4 34-3/4 3-1/2 6-3/4 1-1/2 2 x 2 3 6 6 1049 WN1500PM 1,500,000 96.0% 1,745 58-3/4 31 56-1/2 34-3/4 3-1/2 6-3/4 1-1/2 2 x 2 3 6 6 1185 Notes: hange N to L for L.P. Gas Model. No deration on L.P. models. Performance data based on manufacturer test results. 120 V /15 MP circuit required. ll dimensions shown in inches. Standard Features > 96% Thermal Efficiency > Modulating urner with 10:1 Turndown > Direct-Spark Ignition > Low NOx Operation > Sealed ombustion > Low Gas Pressure Operation > Vertical & Horizontal Venting > ategory IV Venting up to 100 Feet > PV, PV, Polypropylene or L29-4 Vent Material > Sidewall Vent Termination Provided > SME Stainless Steel Heat Exchanger > Gasketless Design > 160 psi Working Pressure > (2) ll ronze irculating Pumps > On/Off Switch > djustable High Limit with Manual Reset > Low ir Pressure Switch > Flow Switches > Inlet & Outlet Temperature Sensors > Two Easy ccess Terminal Strips > SME Temperature & Pressure Relief Valve > Zero learance to ombustible Material > pproved for ombustible Floor Installation > 1 Year Warranty on Parts > 5 Year Limited Warranty (see warranty for details) SMRT TOUH Features > SMRT TOUH Touchscreen Operating ontrol > Full-olor Touchscreen LD Display > uilt-in ascading Sequencer for up to 8 Water Heaters > uilding Management System Integration with 0-10 VD Input > Password Security > Low Water Flow Safety ontrol & Indication > Inlet & Outlet Temperature Readout > Freeze Protection > Service Reminder > Time lock > Data Logging > Hours Running > Ignition ttempts > Last 10 Lockouts > Programmable System Efficiency Optimizers > Night Setback > nti-ycling > Water Heater Pump ontrol > High Voltage Terminal Strip > 120 V / 60 Hertz / 1-Phase Power Supply > Pump ontacts > Low Voltage Terminal Strip > 24 V uxiliary Device Relay > uxiliary Proving Switch ontacts > larm on ny Failure ontacts > Runtime ontacts > Tank Thermostat ontacts > Tank Sensor ontacts > ascade ontacts Optional Equipment > Modbus ommunications > MS Gateway to LON or net > SMRT TOUH P Software > ondensate Neutralization Kit > larm ell > Stainless Steel Vent Kits (1300 & 1500) odes & Registrations > NSI Z21.10.3 certified > SME certified, HLW stamp > alifornia ode compliant > Massachusetts ode compliant > South oast ir Quality Management District registered

3 RMOR 150,000 to 800,000 tu/hr Models The Intelligent pproach to Water Heating There are several tank-type commercial water heaters on the market with 96% thermal efficiency. They all promise tremendous savings on operating costs compared to standard-efficiency units, but none of them truly measures up to the Lochinvar RMOR TM. RMOR is a fully condensing commercial gas water heater. vailable in eight models with inputs ranging from 150,000 to 800,000 tu/hr, the RMOR achieves 96% thermal efficiency. RMOR delivers long-lasting life-cycle efficiency surpassing any commercial unit in its class. When you look beyond the numbers you ll discover the many ways that RMOR technology is in a class by itself! Fully Modulating with 5:1 Turndown RMOR is equipped with fully modulating combustion with 5:1 turndown. This means RMOR can fire as low as 20% of maximum input when water heating demand is lowest, and increase the firing rate up to 100% as demand increases. The result is better overall efficiency and less cycling, compared to all other tank-type units which are on-off, which means they can only fire at 100% of maximum input. RMOR features advanced Negative Regulation (Neg/Reg) sealed combustion technology, permitting fan speed to constantly adjust the volume of fuel and air entering the burner. This ensures that RMOR can safely and reliably operate with supply gas pressure as low as 4 inches water column. Stainless Steel ondensing Heat Exchanger The RMOR s stainless steel heat exchanger is built to SME Section IV requirements. Its design provides superior resistance to corrosion caused by condensation from low entering water temperatures. Traditional commercial water heaters will fail early with low entering water temperatures; however, with the RMOR the lower the supply water temperature the more efficiently it performs throughout the life of the heater. The Ultimate Water Heater Operating ontrol Easy to use makes setup and service a breeze Multi-color graphic lcd display of setup, system status and diagnostic data in words, not codes Water heater pump control: > Pump delay with freeze protection > Pump exercise High-voltage terminal strip: > 120 Vac input to water heater > Water heater pump contacts > uilding recirculating pump contacts Low-voltage terminal strip with 28 points of connection uilt-in cascading sequencer controls up to 8 RMOR units without the added cost of a separate third-party sequencer Interface for optional Smart System P software for advanced setup and diagnostics. Multi-color graphic LD display of setup, system status and diagnostic data in words, not codes 7 Venting Options - Easy, Flexible Installation and Service Room ir Vertical Room ir Sidewall Direct Vent Vertical Vertical w/sidewall ir Direct Vent Vertical* Direct Vent Sidewall* Direct Vent Sidewall** *Optional oncentric Vent Kit Sold Separately ** Sidewall Termination Plate Factory Provided as Standard Equipment

4 RMOR 150,000 to 800,000 tu/hr Models Models 151-200 ELETRIL ONNETIONS K IR INLET 30 1/4" FLUE J INLET GS 29 3/4" H I DRIN 3/4" NPT 11 1/4" 15 1/2" 6 1/2" 15 1/2" 7 3/4" K ELETRIL ONNETIONS 3 3/4" G F E D JLEFT SIDE ONDENSTE DRIN 1/4" - 1 1/4" DJUSTLE FRONT Models 286-801 GS K IR INLET INLET 39 1/2" 39" FLUE I H DRIN 3/4" NPT 18 3/4" 13 3/4" 9" Model tu/hr GPH @ Gas Water ir Vent Shipping Number Input 100 Rise D E F G H I J K onn. onn. Inlet Size Wt. (lbs.) WN151PM 150,000 175 33-1/4 18 12-1/4 11-1/2 10 1-1/2 21-1/4 23 1-3/4 12 1/2 1-1/4 3 3 165 WN200PM 199,999 233 33-1/4 22-1/4 16-1/2 15-3/4 14-1/4 5-1/4 21-1/4 23 1-3/4 16-1/4 1/2 1-1/4 3 3 185 WN286PM 285,000 332 42-1/2 19-3/4 12-3/4 13-1/2 6 2 34 31 11-3/4 4-1/4 3/4 2 4 4 236 WN400PM 399,999 466 42-1/2 27 21 20-3/4 14 3-1/2 34 34 18-3/4 2 1 2 4 4 300 WN501PM 500,000 582 42-1/2 31-1/2 21 25 14 3-1/2 35 35 22 5-3/4 1 2 4 4 339 WN601PM 600,000 699 42-1/2 36-1/4 25 21 14 3-1/2 36 32-3/4 19-1/2 5-1/2 1 2 4 4 380 WN701PM 700,000 815 42-1/2 40-1/4 29 23 17 3-1/2 36 32-3/4 23-1/2 3-1/4 1 2 4 6 461 WN801PM 800,000 931 42-1/2 45-1/4 33-1/4 23 17 3-1/2 36 32-3/4 27-3/4 3-1/4 1 2 4 6 527 Standard Features > 96% Thermal Efficiency (HRI ertified) > Modulating urner with 5:1 Turndown > Direct-Spark Ignition > Low NOx Operation > Sealed ombustion > Low Gas Pressure Operation > Vertical & Horizontal Direct-Vent > PV, PV, Polypropylene or SS up to 100 Feet > PV/PV Sidewall Vent Termination > Stainless Steel Heat Exchanger > ll Welded onstruction, Gasketless Design > 160 psi Working Pressure > SME onstruction (W 286-801) > Natural to L.P. onversion Kit > ll ronze irculating Pump > On/Off Switch > Flow Switch > SME Temperature & Pressure Relief Valve (286-801) > Temperature & Pressure Gauge (W 501-801) > Downstream Test Valves (W 501-801) > djustable Leveling Legs > Tank Sensor > djustable High Limit w/ Manual Reset > utomatic Reset High Limit > ondensate Trap > Zero learances to ombustible Material > 5 Year Limited Warranty (See Warranty for Details) > 1 Year Parts Warranty (See Warranty for Details) 15 1/2" 8" K 3 3/4" G LEFT SIDE Smart System Features > SMRT SYSTEM Digital Operating ontrol > Multi olor Graphic LD Display > uilt in ascading Sequencer for up to 8 Water Heaters > Multiple Size Water Heater ascade > Lead Lag > Efficiency Optimization > Front-End Loading apability with opperfin II > uilding Management System Integration > Modbus ommunication (Optional) > 0-10 VD Input to ontrol Modulation or Set point > 0-10 VD Modulation Rate Output > 0-10 VD Input to Enable/Disable call for heat > ccess to MS Settings Through Graphic LD Display > Low Water Flow Safety ontrol & Indication > Inlet & Outlet Temperature Sensors & Readout > Flue Temperature Sensor > Water Heater Pump ontrol > Pump Delay with Freeze Protection > Pump Exercise > Night Setback > uilding Recirculation Loop Pump ontrol* > Night Setback of uilding Recirculation Loop* > Time lock > Maintenance Reminder > bility to program installer name and number into the product as service contact *Exclusive to Lochinvar F D E ONDENSTE DRIN 1/4" - 1 1/4" DJUSTLE FRONT > High Voltage Terminal Strip > 120 V / 60 Hertz / 1 Phase Power Supply > Pump ontrol ontacts > Water Heater Pump ontrol ontacts > uilding Recirculation Pump ontrol ontacts > Low Voltage Terminal Strip > 24 V uxiliary Device Relay > uxiliary Proving Switch ontacts > Flow Switch ontacts > larm on ny Failure ontacts > Runtime ontacts > Tank Sensor ontacts > ascade ontacts > 0-10 VD MS External ontrol ontact > 0-10 VD oiler Rate Output ontacts Firing ontrol Systems > M9 Standard onstruction > M7 alifornia ode (W 286-801) Optional Equipment > larm ell > ondensate Neutralization Kit > High & Low Gas Pressure Switches (W 501-801) > oncentric Vent Kit (3 & 4 PV/PV only) > MS Gateway to LON or acnet > Modus ommunications > SMRT SYSTEM P Software > Room ir Vent Kits > Stack Frame

5 RMOR Wall Mount 125,000 and 199,999 tu/hr Models Wall Mounted Water Heater Lochinvar has added to its successful stainless steel, condensing RMOR water heater series with wall mounted models. The RMOR Wall Mount is available in two sizes, 125,000 and 199,999 tu/hr input. The light weight but powerful water heaters hang on any wall to give you more free space in your mechanical room. The etter Idea System and Instantaneous Water Heaters The water heater and tank combination is the heart of Lochinvar s ETTER IDE water heating philosophy. The RMOR water heater is always installed with a separate storage tank to provide an effective water heating package for commercial domestic water systems. The industry has made a few unsuccessful attempts at applying residential instantaneous water heating to commercial applications. Instantaneous products are outmatched by the faster, larger and variable hot water demands of a commercial application. Storage is essential to supply the water to a system at a variety of speeds and volumes. What s more, the RMOR ETTER IDE system delivers lower equipment costs and lower installation costs than a comparable instantaneous package. Fully Modulating with 5:1 Turndown RMOR features advanced Negative Regulation (Neg/Reg) sealed combustion technology, permitting fan speed to constantly adjust the volume of fuel and air entering the burner. This ensures that RMOR can safely and reliably operate with supply gas pressure as low as 4 inches water column. RMOR is equipped with fully modulating combustion with 5:1 turndown. This means RMOR can fire as low as 20% of maximum input when water heating demand is lowest, and increase the firing rate up to 100% as demand increases. The result is better overall efficiency and less cycling, compared to all other tank-type units which are on-off, which means they can only fire at 100% of maximum input. The Ultimate Water Heater Operating ontrol Water heaters with different inputs can be cascaded together to maximize turndown capability ompatibility with opper-fin II non-condensing water heater to create a front end loading system Night Setback apabilities - Setback of Storage Tank Temperature Water heater pump control - Pump delay with freeze protection - uilding Recirculation Pump ontrol* - Pump exercise High-voltage terminal strip - 120 Vac input to water heater - Dry ontacts for Water Heater Pump ontrol - Dry ontacts for uilding Recirc. Pump ontrol * Low-voltage terminal strip with 28 points of connection - 0-10 VD Water Heater Rate Output - 0-10 VD Heat Demand Input - Modbus ontacts US onnection Point for optional Smart System P software with advanced setup and diagnostics Modbus ompatibility (Optional) 5 Flexible Venting Options - Up to 100 feet of air intake and 100 feet of exhaust vent with PV, PV, Polypropylene or SS. Direct Vent Sidewall Direct Vent Vertical Vertical w/sidewall ir oncentric Direct Vent Vertical oncentric Direct Vent Sidewall

6 RMOR Wall Mount 125,000 and 199,999 tu/hr Models 7-1/2" 16" FLUE 8" ELETRIL ONNETIONS H I GS RELIEF VLVE IR INTKE D E WTER WTER INLET ONDENSTE TRP F 1-3/4" 18-1/2" G 2-3/4" 15-1/2" ONDENSTE LINE TOP SIDE OTTOM Model tu/hr GPH @ Gas Water ir Vent Shipping Number Input 100 Rise D E F G H I onn. onn. Inlet Size Wt. (lbs.) WN125PM 125,000 144 29-1/4 18 13 7 13 3-1/2 2-3/4 5-1/2 6 1/2 1 3 3 145 WN200PM 199,999 233 29-1/4 25 20 14 11-3/4 3-1/2 1-1/2 5-1/2 13 1/2 1-1/4 3 3 177 Standard Features > HRI ertified 96% Thermal Efficiency > Wall Mounted Models > Modulating urner with 5:1 Turndown > Direct-Spark Ignition > Low NOx Operation > Sealed ombustion > Low Gas Pressure Operation > Vertical & Horizontal Direct-Vent > PV/PV, Polypropylene or SS up to 100 Feet > PV/PV, Polypropylene Sidewall Vent Termination > Stainless Steel Heat Exchanger > ll Welded onstruction, Gasketless Design > 160 psi Working Pressure > Natural to L.P. onversion Kit > ll ronze irculating Pump > Flow Switch > Temperature & Pressure Relief Valve > Tank Sensor > djustable High Limit w/ Manual Reset > utomatic Reset High Limit > ondensate Trap > Zero learances to ombustible Material > 5 Year Limited Warranty (See Warranty for Details) > 1 Year Parts Warranty (See Warranty for Details) Smart System TM Features > SMRT SYSTEM TM Digital Operating ontrol > Multi olor Graphic LD Display > uilt in ascading Sequencer for up to 8 Water Heaters > Multiple Size Water Heater ascade > Lead Lag > Efficiency Optimization > uilding Management System Integration > Modbus ommunication (Optional) > 0-10 VD Input to ontrol Modulation or Set point > 0-10 VD Modulation Rate Output > 0-10 VD Input to Enable/Disable call for heat > ccess to MS Settings Through Graphic LD Display > Low Water Flow Safety ontrol & Indication > Inlet & Outlet Temperature Sensors & Readout > Flue Temperature Sensor > Water Heater Pump ontrol > Pump Delay with Freeze Protection > Pump Exercise > Night Setback > uilding Recirculation Loop Pump ontrol > Time lock > Maintenance Reminder > bility to program installer name and number into the product as service contact > High Voltage Terminal Strip > 120 V / 60 Hertz / 1 Phase Power Supply > Pump ontrol ontacts > Water Heater Pump ontrol ontacts > uilding Recirculation Pump ontrol ontacts > Low Voltage Terminal Strip > 24 V Louver Relay > Louver Proving Switch ontacts > Flow Switch ontacts > larm on ny Failure ontacts > Runtime ontacts > Tank Sensor ontacts > ascade ontacts > 0-10 VD MS External ontrol ontacts > 0-10 VD oiler Rate Output ontacts Firing ontrol Systems > M9 Standard onstruction Optional Equipment > larm ell > ondensate Neutralization Kit > oncentric Vent Kit (3 PV/PV only) > Modus ommunications > MS Gateway to LON or acnet > SMRT SYSTEM P Software

7 SHIELD 125,000 to 500,000 tu/hr Models SHIELD Even etter The SHIELD is now available in eight models. Offering you more sizes in SME construction and a new 125,000 tu/hr-65 gallon model. We have added a large LD display and a new control with more features. ll utility connections are now out the top of the unit to reduce equipment room footprint and improve installation flexibility. dditionally, a large removable pump access panel has been added and the control has been moved to the front of the cabinet, improving the serviceability of the SHIELD. 96 % Thermal Efficiency for Life The SHIELD water heater operates at 96% thermal efficiency and provides 100% effective defense against a water heater s worst enemy lime scale buildup on the tank and heating surfaces. Tank type water heaters suffer from one thing the SHIELD does not, lime scale buildup. Lime scale insulates the water from the heat source, decreasing thermal efficiency and increasing operating costs. Just a ¼ of lime scale will increase fuel consumption and raise operating costs as much as 25%. SHIELD has no flue tubes inside the tank. The water is heated in a separate stainless steel heat exchanger mounted above the tank. y controlling and creating high water velocity through the heat exchanger, the heat surface areas are kept clean so thermal efficiency remains high, for life. Negative/Regulation Fully Modulating with 5:1 Turndown SHIELD utilizes an advanced combustion system which provides NOx ratings compatible with the most stringent air quality standards. dditionally, the NEG/REG sealed combustion technology allows the unit to operate with inlet gas pressure as low as 4 inches water column. dvanced Electronic ontrol SHIELD features the ultimate water heater control which makes system setup, service and operation a breeze. backlit LD display gives readouts of setup, system status and diagnostic information. SHIELD Standard Tank Types Efficiency Loss Due to Lime Scale uildup % Efficiency over Heater Life Years of Operation NOTE: The chart is based on limescale build-up of 1/16 inch per year which reduces operating efficiency approximately 8-10% per year. Fully Modulating with 5:1 Turndown SHIELD can fire as low as 20% of maximum input when water heating demand is lowest, and increase to 100% for peak-demand periods. This results in better overall efficiency and less cycling compared to on-off tank-type units that can only fire at 100%. Operating Efficiency ONTROL also includes: > Night Setback > Time lock > larm ontacts > Runtime ontacts > Last 10 Lock-Outs > Security Protection > djustable Pump Delay > Enable/Disable ontacts > ontacts for Louvers SMRT 7 Venting Options - Easy, Flexible Installation and Service Room ir Vertical Room ir Sidewall Direct Vent Vertical Vertical w/ Sidewall ir Direct Vent Vertical* Direct Vent Sidewall* Direct Vent Sidewall *Optional oncentric Vent Kit Sold Separately ** Sidewall Termination Plate Factory Provided as Standard Equipment

8 SHIELD 150,000 to 500,000 tu/hr Models TOP VIEW TOP VIEW TOP VIEW TOP VIEW TOP VIEW TOP VIEW ELETRIL ELETRIL ELETRIL ELETRIL ELETRIL 126-65 151-100 201-100 286-125 401-125 501-125 ELETRIL E D E D E D Model tu/hr apacity GPH @ First Gas Water ir Vent Shipping Number Input (Gal) 100 Rise Hour D E onn. onn. Inlet Size Wt. (lbs.) SNR126-065 125,000 65 145 197 60-1/4" 28" 29-1/2" 45-1/4" 1/2" 1-1/2" 3" 3" 377 SNR151-100 150,000 90 175 247 75-1/2" 28" 44" 59-1/2" 1/2" 1-1/2" 3" 3" 700 SNR201-100 199,999 90 233 305 75-1/2" 28" 44" 59-1/2" 1/2" 1-1/2" 3" 3" 725 SN151-100* 150,000 90 175 247 75-1/2" 28" 44" 59-1/2" 1/2" 1-1/2" 3" 3" 700 SN201-100* 199,999 90 233 305 75-1/2" 28" 44" 59-1/2" 1/2" 1-1/2" 3" 3" 725 SN286-125* 285,000 120 332 428 75-1/2" 34" 31" 49" 3/4" 2" 4" 4" 800 SN401-125* 399,999 120 465 561 75-1/2" 34" 31" 49" 1" 2" 4" 4" 850 SN501-125* 500,000 120 582 678 75-1/2" 34" 31" 49" 1" 2" 4" 4" 875 hange N to L for LP gas. Field convertible to LP Gas * = SME onstruction Electrical Requirements: 120 V/60Hz/Phase ll Information is subject to change. Standard Features > 96% Thermal Efficiency > Modulating urner with 5:1 Turndown > Operates at Temperatures up to 180 F for Sanitizing pplications > Stainless Steel Heat Exchanger > Glass-Lined Steel Tank > Magnesium node Rods > 150 PSI Working Pressure > SME onstruction (SN151 501) > SME Temperature and Pressure Relief Valve > Zero learances to ombustible Material > ertified for Installation on ombustible Floors > PV, PV, Polypropylene and Stainless Steel Venting up to 100 Equivalent Feet > Direct-Vent Sealed ombustion > Rooftop and Sidewall Venting > Sidewall Vent Termination > dvanced SMRT ONTROL, with: > LD Display > Time lock > Night Setback > larm ontacts > Runtime ontacts > Manual Reset High Limit > 3 Water Temperature Sensors > Flue Temperature Sensor > ontacts for Louvers > djustable Pump Delay > Security Protection > Enable/Disable ontacts > Low-NOx Operation, meets SQMD Rule 1146.2 > Low Gas Pressure Operation > Direct-Spark Ignition > Full Port rass Drain Valve > 8-Foot Power ord > 3-Year Limited Warranty > 1-Year Parts Warranty Optional Equipment > larm ell > oncentric Vent Kit > ondensate Neutralization Kit > Low Water utoff > Tank Side Tappings for lternate Heat Source

9 Power-Fin 500,000 to 2,000,000 tu/hr Models The Next Generation The latest generation of Power-Fin, with new uilt-in dvantages from Lochinvar orporation. These include expanded burner modulation and the advanced SMRT SYSTEM operating control, including a built-in cascading sequencer for up to eight water heaters. Power-Fin water heaters can be installed with Lochinvar s advanced Lock-Temp storage tanks, in a wide variety of combinations to meet system sizing requirements. Factory packaged water heater/storage tank systems can be built to your specifications, with all piping installed, and shipped on channel iron skids. ontrol uilt-in cascading sequencer controls up to 8 water heaters 2-line 16-character LD readout of setup, system status and diagnostic data in words, not codes. Password security Pump control for operation of water heater pump Pump delay w/freeze protection Low NOx operation 0-10 Vdc MS input for easy integration into uilding Management Systems Optional smart system P software for advanced setup and diagnostics Modbus ommunication - Optional Infinite Modulation With thermal efficiencies up to 87%, Power-Fin water heaters feature infinitely modulating burner firing rates (turndown), precisely matching the firing rate to domestic water load requirements. The result is better overall efficiency and less cycling. Power-Fin water heaters may be specified as either 5:1 turndown (502-2001), 2:1 turndown (1501-2001), or ON/OFF (502-1302). With 5:1 turndown the burner fires as low as 20% of maximum input when demand is lowest and increases the firing rate up to 100% as demand increases. Models with 2:1 turndown modulate from 50% to 100% of maximum input. Gasketless Heat Exchanger The Power-Fin heat exchanger features an array of 20 or 24 copper-finned tubes surrounding the burner for maximum heat transfer. Lochinvar also pioneered the gasketless heat exchanger, which eliminates the use of O-rings and gaskets. ecause of the time-proven reliability of this design, the Power-Fin heat exchanger is backed by a 5 year limited warranty. Venting Options Directire Horizontal* Vents horizontally up to 50 equivalent feet using ategory IV vent materials. Draws combustion air up to 50 ft. from a different pressure zone. Direct Venting* Horizontal or vertical venting up to 50 equivalent feet using ategory IV vent materials. Draws combustion air from the same pressure zone. This option only available with 5:1 (M) firing code models. Sidewall Venting* Horizontal venting up to 50 equivalent feet using ategory IV vent materials. Draws combustion air from the room. Directire Vertical* Vertical venting up to 50 equivalent feet using ategory I or IV vent materials. Draws combustion air up to 50 ft. from a different pressure zone. *Requires factory supplied vent kit with M firing code models. ommon Venting* Vents multiple units vertically through one vent termination with ategory II vent materials and draws combustion air from the room, roof or sidewall. Vent kit and ategory IV to II conversion kit required. Vertical Vent Vertical venting using ategory I or ategory IV vent materials. Draws combustion air from the room.

10 Power-Fin 500,000 to 2,000,000 tu/hr Models Dimensions & Specifications J K M G P N L GPH @ Model Number tu/hr Input 100 F Rise (F) (M) D E ()/(F) E (M) F G H J PFN0502PM 500,000 515 527 44-1/2 28-1/2 23-1/4 34 17-3/4 19-1/2 6-1/2 6 8 7-3/4 PFN0752PM 750,000 773 791 52 28-1/2 23-1/4 41-1/2 17-3/4 19-1/2 6-3/4 6 8 7-3/4 PFN1002PM 999,999 1,030 1,054 59-1/4 28-1/2 23-1/4 48-3/4 17-3/4 19-1/2 7-1/4 6 8 7-3/4 PFN1302PM 1,300,000 1,323 1,371 67-3/4 28-1/2 23-1/4 57-1/4 17-3/4 19-1/2 8-1/4 6 8 7-3/4 PFN1501PM 1,500,000 1,527 1,582 65-1/2 29-3/4 27-1/4 58-3/4 21 21 13-1/2 8 10 9-1/2 PFN1701PM 1,700,000 1,731 1,793 70 29-3/4 27-1/4 63-1/4 21 21 13-1/2 8 10 9-1/2 PFN2001PM 2,000,000 2,036 2,109 76-3/4 29-3/4 27-1/4 70 21 21 13-1/2 8 10 9-1/2 Vent Sizes Model P P Gas ir at I at II at IV Wt. Number K L M N ()/(F) (M) onn. Inlet ()/(F) (M) (M) (lbs) PFN0502PM 23 11-1/2 11-1/4 17-1/2 15-1/4 15-1/4 1 5 7 7 4 571 PFN0752PM 30-1/2 11-1/2 11-1/4 17-1/2 15-1/4 15-1/4 1-1/4 5 9 9 5 620 PFN1002PM 37-3/4 11-1/2 11-1/4 17-1/2 15-1/4 15-1/4 1-1/4 6 10 10 6 669 PFN1302PM 46-1/4 11-1/2 19-1/2 17-1/2 15-1/4 15-1/4 1-1/4 6 12 12 8 718 PFN1501PM 43-1/2 5-3/4 22-1/4 21-1/2 24-1/2 19-1/2 1-1/2 6 12 8 6 1,115 PFN1701PM 48 5-3/4 25 21-1/2 24-1/2 19-1/2 1-1/2 7 14 9 7 1,150 PFN2001PM 54-3/4 5-3/4 27-1/2 21-1/2 24-1/2 19-1/2 1-1/2 8 14 10 8 1,184 Notes: hange N to L for LP Gas Model. No deration on LP models. Temperature rise calculations based on firing rate of 100% ll water connections are 2-1/2 Standard Features > Up to 87% Thermal Efficiency (M Models) > Modulating urner with 5:1 Turndown > Up to 84% Thermal Efficiency (/F models) > Modulating urner with 2:1 Turndown ( Models) > On/Off urner (F Models) > Fan ssisted Sealed ombustion > Hot Surface Ignition > Low NOx Operation > Low Gas Pressure Operation > Venting Flexibility > ategory I ( & F) > ategory IV Venting (M) > Optional ombined Venting at. II (M) > SME opper-finned Tube Heat Exchanger > SME ertified, HLW Stamped > 150 psi SME T & P Relief Valve > Gasketless design > 160 psi working pressure > On/Off Switch > djustable High Limit w/ Manual Reset > Flow Switch > Low ir Pressure Switch > Flue Temperature Sensor > Downstream Test ocks > ombustion ir Filtration > ll ronze irculating Pump > Zero learances to ombustible Material Standard Features ont'd > 1 Year Warranty on Parts > 5 Year Limited Warranty (See Warranty for Details) Smart System Features > SMRT SYSTEM Operating ontrol > 2 line, 16 haracter Display > Dual Level Password Security > uilt in ascading Sequencer for up to 8 Water Heaters > uilding Management System Integration with 0-10 VD Input > Low Water Flow Safety ontrol & Indication > Inlet & Outlet Temperature Readout > Product Service Indicator > Freeze Protection > Service Reminder > Time lock > Data Logging > Ignition ttempts > Last 10 Lockouts > Programmable System Efficiency Optimizers > Night Setback > Pump ontrol > Domestic Hot Water Pump > High Voltage Terminal Strip > 120 V/ 60 Hertz/ 1 Phase Power Supply > Pump ontacts with Pump Relays > Low Voltage Terminal Strip > 24 V uxiliary Device Relay > uxiliary Proving Switch ontacts > Flow Switch ontacts > larm on ny Failure ontacts > Runtime ontacts > ascade ontacts > 0-10 VD MS External ontrol ontact Firing ontrol Systems > M Indicates 5:1 Turndown, ategory IV > Indicates 2:1 Turndown, ategory I > F Indicates 100% On/Off Fire, ategory I > M9 Standard > 9 or F9 Special Order, Factory Trimmed > M7, 7 or F7 alifornia ode Optional Equipment > larm ell > Modbus ommunication > MS Gateway to LON or net > upro-nickel Heat Exchanger > High & Low Gas Pressure Switches w/ Manual Reset > Low Water utoff w/manual Reset & Test > SMRT SYSTEM P Software > Vent Kits: - Horizontal Exhaust ap - Horizontal ir Intake ap - Horizontal Direct Vent Kit - ategory IV to ategory II onversion Kit

11 opper-fin II 400,000 to 2,070,000 tu/hr Models Nine models from 399,999 to 2,070,000 tu/hr input provide an exceptional product with some refined features in addition to the established features that redefined the industry. Refined Design Puts More ontrol and Information at your Fingertips The most exciting addition to the opper-fin II is the SMRT SYSTEM TM control. The SMRT SYSTEM is an advanced, state of the art integrated operating control. The control provides the installer, owners and operators with precise temperature control and diagnostic information. dvanced features include: 2-Line, 16 haracter LD display of Setup, System Status and Diagnostic Data in Words, not codes uilt-in ascade sequencer controlling up to 8 water heaters 0-10 VD MS Input to control water heater operation Modbus communications - optional Gasketless Heat Exchanger In 1989, Lochinvar was the first water heater manufacturer to offer gasketless cast iron and copper-finned tube heat exchangers. Our unique gasketless design enhances reliability by eliminating o-rings and gaskets found on other brands. The heat exchanger features glass lined headers and copper-finned tubes with extruded integral fins spaced 7-fins per inch for exceptional heat transfer. The heat exchanger is built to SME construction standards for 160 psi working pressure and is backed by a five year limited warranty. Proportional Firing Proportional firing divides a single manifold of multiple burners into smaller, independent stages. With up to four stages of individual operation, the Smart System control can reduce the firing input rate down to approximately 25% tu/ hr input. This simple but effective design matches the water heater s firing capacity to the constantly changing system demand on the water heating system. Stage firing delivers the tu s required in smoother and longer burn cycles which will improve operation and reduce component fatigue. Meets The Toughest ir Quality Standards ecause of our unique fan-assisted combustion process, the opper-fin II exceeds today s toughest NOx emissions requirements. n independent certification laboratory test gave us a rating of less than 20 ppm corrected to 3% O 2. nd less NOx means a cleaner environment. ompact Design - For Installation Ease The opper-fin II is compact enough to fit through standard 36 doorways with ease. Even our 2 million tu/hr model is only 33-1/2 wide. This space-saving design frees up more space in the mechanical room. nd our optional Stack Frame lets you put two units in the footprint of just one. Venting Options onventional Vents into conventional flue or vent breaching using Type double wall vent. Sidewall (F 402-752) Draws fresh air from inside the room. Vents up to 50 equivalent feet directly through the outside wall without the need for a powered sidewall cap. Directire Vertical w/ Sidewall Inlet Outdoor Draws fresh air from outside and vents through conventional vertical flue. Requires optional outdoor vent cap. Use when indoor space is a problem or if outdoor location gives better access. Powered Sidewall Directire Vertical Power Directire Horizontal ire-lock Direct Vent Vents directly through the outside wall using an optional powered sidewall cap. Ideal when a vent stack is not practical. Draws fresh air from outside and vents through conventional vertical flue. Draws fresh air from outside and vents through sidewall using optional powered vent cap. Draws fresh air 50 equivalent feet from a sidewall. Vents horizontally up to 50 equivalent feet through the sidewall.

12 opper-fin II 400,000 to 2,070,000 tu/hr Models E GS ONNETION 0402-0752 F GS ONNETION 0992-2072 INLET IR FILTER G G D INLET H Model tu/hr GPH @ Vent ir Gas Shipping Number Input 100 F Rise D E F G H Size Inlet onn Weight FN0402PM 399,000 412 31-1/2" 37-3/4" 22-1/4" 12-1/2" 7" 7" 29" 6-1/2" 6" 6" 1-1/4" 454 FN0502PM 500,000 515 31-1/2" 45-1/2" 22-1/4" 12-1/2" 7" 7" 29" 6-1/2" 6" 6" 1-1/4" 467 FN0652PM 650,000 670 31-1/2" 56-3/4" 22-1/4" 12-1/2" 8-1/2" 8-1/4" 29" 6-1/2" 8" 8" 1-1/4" 551 FN0752PM 750,000 773 31-1/2" 64" 22-1/4" 12-1/2" 8-1/2" 8-1/4" 29" 6-1/2" 8" 8" 1-1/4" 611 FN0992PM 990,000 1,020 36" 48-1/4" 33-1/2" 15-3/4" 8-1/2" 8-1/2" 33-3/4" 8-3/4" 10" 10" 2" 843 FN1262PM 1,260,000 1,298 36" 58-1/2" 33-1/2" 15-3/4" 10-1/2" 9-1/2" 33-3/4" 8-3/4" 12" 12" 2" 939 FN1442PM 1,440,000 1,484 36" 68-3/4" 33-1/2" 15-3/4" 10-1/2" 10-1/2" 33-3/4" 8-3/4" 12" 12" 2" 1,035 FN1802PM 1,800,000 1,855 36" 82-1/4" 33-1/2" 15-3/4" 11" 11" 33-3/4" 8-3/4" 14" 12" 2" 1,168 FN2072PM 2,070,000 2,133 36" 92-1/2" 33-1/2" 15-3/4" 11" 11" 33-3/4" 8-3/4" 14" 12" 2" 1,285 Notes: hange N to L for LP gas models. No deration on LP models Water connections for models F 0402-0752 are 2 NPT on 6-1/2 centers. Header increases dimension 3-1/2 for models F 0402-0752 and 6-1/4 for models F 0992-2072 Water connections for models F 0992-2072 are 2-1/2 NPT on 11-1/4 centers. Pump and flanges are shipped loose for field installation. Performance data is based on manufacturer test results. Standard Features > 85% Thermal Efficiency (HRI ertified) > Proportional Firing up to 4:1 Turndown > Hot Surface Ignition > Low NOx Operation > Sealed ombustion > Low Gas Pressure Operation > Vertical & Horizontal Venting > ategory I Venting > Double Wall Vent Material > ategory IV Venting > L29-4 Stainless Steel Vent Material > SME opper Finned Tube Heat Exchanger > SME ertified, HLW Stamped > Gasketless design > 160 psi working pressure > On/Off Switch > ombustible Floor Rated (0992-2072) > djustable High Limit w/ Manual Reset > ll ronze irculating Pump > Flow Switch > Low ir Pressure Switch > Inlet & Outlet Temperature Sensors > Easy ccess Terminal Strips > Downstream Test ocks > 150 psi SME Temperature and Pressure Relief Valve > 1 Year Warranty on Parts (See Warranty for Details) > 5 Year Limited Warranty (See Warranty for Details) Smart System Features > SMRT SYSTEM Operating ontrol > 2 Line/16 haracter LD Display > Multiple Size Water Heater ascade > ompatibility with RMOR (W 151-801) for Front End Loading > uilt in ascading Sequencer for up to 8 water heaters > uilding Management System Integration with 0-10 VD Input > 0-10 VD Rate Output > Password Security > Low Water Flow ontrol & Indication > Inlet & Outlet Temperature Readout > Freeze Protection > ondensing Protection > Service Reminder > Time lock > Data Logging > Hours Running > Ignition ttempts > Last 10 Lockouts > Programmable System Efficiency Optimizers > Night Setback > Pump ontrol > Water Heater Pump > Recirculation Pump > High Voltage Terminal Strip > 120 V / 60 Hertz / 1 Phase Power Supply > Pump ontacts with Pump Relay > Low Voltage Terminal Strip > 24 V uxiliary Device Relay Output - Louvers > uxiliary Proving Switch ontacts - Louvers > larm on ny Failure ontacts > Runtime ontacts > Unit Enable/Disable ontacts > Tank Sensor ontacts > ontacts for ir Louvers > ontacts on ny Failure > ascade ontacts > 0-10 VD MS External ontrol ontact > 0-10 VD Rate Output ontacts Optional Equipment > larm > High & Low Gas Pressure Switches w/ Manual Reset > upro-nickel Heat Exchanger > Low Water ut Off, Probe Type w/ Manual Reset & Test > Modbus ommunications > MS Gateway to LON or net > ombustible Floor Kit (0402-0752) > Stack Frame Firing odes > M7 Firing ode - alifornia ode > M9 Firing ode - Hot Surface Ignition with Electronic Supervision odes and Registrations > NSI Z21.10.3/S 4.3 certified > South oast ir Quality Management District registered > Texas ommission on Environmental Quality

13 opper-fin 495,000 to 2,065,000 tu/hr Models Installation Flexibility and ost-savings With compact sizes that use less floor space than ever before, all opper-fin units are narrow enough to fit through a standard 36 doorway an ad van tage most commercial boilers can t provide. Plus, thanks to special insulating materials, opper-fin units require only 3 clearance from combustible walls. What s more, our Stack Frame allows you to install two units in the area normally required for one. This makes it easier to fit multiple opper-fin water heaters into cramped me chan i cal rooms. nd you can even use a smaller diameter vent stack - up to 8 smaller than typically required for comparable atmospheric boilers - so it saves money as well as valuable mechanical room space Unique opper-fin Heat Ex chang er The Lochinvar opper-fin water heater design uses a two-pass heat ex chang er. Water is circulated through a row of highly-efficient, finned copper tubes. The high rate of water flow creates a scour ing action that prevents sed i ment and lime-scale buildup so common in conventional water heaters, and the finned copper tubes allow maximum heat transfer efficiency. To create this special heat capability, Lochinvar extrudes the fins from thick wall copper tubing to precise specifications -ex act ly 7 fins per inch. The result is an integrally-finned tube with a heat transfer ratio 9 times greater than a plain copper tube. Heavy-Duty Gasketless Design What s more, advanced casting processes allowed Lochinvar to develop a unique one-piece header system. This gasketless design provides enhanced reliability, improved durability and optimizes performance - but without the problems or failures so common to O-rings and gaskets. Meets The Toughest ir Quality Standards ecause of our unique fan-assisted combustion process, the opper-fin exceeds today s toughest NOx emissions requirements. n independent certification laboratory test gave us a rating of less than 20 ppm corrected to 3% O2. nd less NOx means a cleaner environment. Enhanced to Provide Performance and Serviceability Our opper-fin models offer reliable operation and feature a service friendly design. The referenced gas valves are in the upper deck for easy access, and the electrical and EMS connections have all been repositioned toward the front of the unit for easier service access. The gas valves are referenced to the sealed combustion chamber to improve operational performance by monitoring the pressure in the sealed combustion chamber and adjusting gas flow to maintain the optimum air/fuel mixture. nd the built-in air inlet filter reduces maintenance and improves performance by trapping dust and airborne particulates that can foul the burners and blowers. With duel sight glasses (one on each end), you can easily monitor burner performance and flame characteristics throughout the entire combustion chamber. The operator interface panel provides electronic temperature control and comprehensive diagnostic status, without opening the control panel. Its user friendly design simplifies service while providing additional diagnostic information through a series of LEDs.

14 opper-fin 495,000 to 2,065,000 tu/hr Models GPH @ Inlet Outlet Model tu/hr 100 F Gas Water Water Vent Shipping Number Input Rise D E F G onn. onn. onn. Size Weight WN0497PM 495,000 486 31-1/2 45-1/4 22-1/4 12-1/2 9-1/2 22-3/4 29-1/2 1-1/4 2 2 6 490 WN0647PM 645,000 633 31-1/2 56-3/4 22-1/4 12-1/2 9-1/2 28-1/2 29-1/2 1-1/4 2 2 8 555 WN0747PM 745,000 731 31-1/2 64 22-1/4 12-1/2 9-1/2 32 29-1/2 1-1/4 2 2 8 610 WN0987PM 985,000 967 36 48-1/4 33-1/2 15-3/4 8-1/2 8-1/2 33-1/4 2 2-1/2 2-1/2 10 900 WN1257PM 1,255,000 1,232 36 58-1/2 33-1/2 15-3/4 9-1/2 10-1/2 33-1/4 2 2-1/2 2-1/2 12 1,020 WN1437PM 1,435,000 1,409 36 68-3/4 33-1/2 15-3/4 10-1/2 10-1/2 33-1/4 2 2-1/2 2-1/2 12 1,065 WN1797PM 1,795,000 1,762 36 82-1/4 33-1/2 15-3/4 11 11 33-1/4 2 2-1/2 2-1/2 14 1,265 WN2067PM 2,065,000 2,027 36 92-1/2 33-1/2 15-3/4 11 11 33-1/4 2 2-1/2 2-1/2 14 1,400 hange N to L for LP gas models. Water connections for models (W 0497-0747) are 2 NPT on 6-1/2 centers. Performance data is based on manufacturer test results. Water connections for models (W 0987-2067) are 2-1/2 NPT on 11-1/4 centers. Standard Features 81% Thermal Efficiency Electronic Temperature ontrol Fan ssisted ombustion Sealed ombustion hamber Stainless Steel urners Low NOx Operation Exceeds the most Stringent ir Quality Requirements SME opper Finned Tube Heat Exchanger 160 psi Working Pressure Gasketless Heat Exchanger Design ll ronze irculating Pump Pump Delay w/ Freeze Protection Remote Tank Thermostat Glass-Lined Water Surfaces Referenced Gas Valves Loch-Heat eramic Tile ombustion hamber Hot Surface Ignition SME Temperature & Pressure Relief Valve djustable High Limit w/ Manual Reset Flow Switch 24 Volt ontrol System MS Terminal Strip ombustion ir Filter 5 Year Limited Warranty on Heat Exchanger (See warranty for details) Optional Equipment larm ell ontacts on any Failure ontacts for ir Louvers upro-nickel Heat Exchanger High and Low Gas Pressure Switch w/ Manual Reset Low Water ut-off Stack Frame MP2 Sequencer vailable Firing Systems M9 HSI (Standard) M7 alifornia ode Venting Outdoor Vent ap and Pump over

15 Efficiency+ 150,000 to 300,000 tu/hr Models Efficiency+ delivers unsurpassed performance, reliability and energy savings - year after year. While most competitive models peak at 80% thermal efficiency, the Efficiency+ delivers a remarkable 84% thermal efficiency, which means that 84 out of each fuel dollar goes toward heating the water, and not up the flue! When you combine the outstanding thermal efficiency with the scale free operation of the copper-fin tube heat exchanger and the convenience and safety of direct venting you have a product that is simply the smartest choice in water heating. Moreover, when you package the Efficiency+ with a Lock-Temp storage tank, you get a system that provides high efficiency and high delivery. The EfficiencyPac is a powerful combination that lowers operating costs, provides high delivery rates, and offers longer equipment life than traditional tank type water heaters. Dimensions & Specifications Model tu/hr GPH @ Vent Gas Shipping Number Input 100 F Rise D E G Size* onn. Weight EWN150PM 150,000 153 19-3/4 16 7-1/4 11-3/4 5 3/4 295 EWN200PM 199,999 204 23-3/4 20 9-1/4 11-3/4 5 3/4 318 EWN250PM 250,000 255 27-1/2 23-3/4 11 11-3/4 6 3/4 341 EWN300PM 300,000 305 31-1/4 27-1/2 13 11-3/4 6 3/4 363 Notes: hange N to L for LP gas models. Water connections for models (EW 150-300) are 2 NPT on 6-1/4 centers. ir inlet equals vent diameter. Performance data based on manufacturer test results. * Vent size is for conventional venting, venting options require 1 smaller vent diameter. Standard Features 84% Thermal Efficiency Sealed ombustion hamber Stainless Steel urners Low NOx Operation Exceeds the most Stringent ir Quality Requirements SME opper Finned Tube Heat Exchanger 160 psi Working Pressure Gasketless Heat Exchanger Design Low Lead irculating Pump Pump Delay w/freeze Protection Remote Tank Thermostat Venting Options utomatic Reset High Limit Manual Reset High Limit Glass-Lined Water Surfaces Loch-Heat eramic Tile ombustion hamber Hot Surface Ignition SME Temperature & Pressure Relief Valve 24 Volt ontrol System 3 Year Limited Warranty on Heat Exchanger (See warranty for details) vailable Firing Systems F9 Hot Surface Ignition with Electronic Supervision F7 alifornia ode Optional Equipment djustable High Limit w/ Manual Reset larm ell ontacts on any Failure upro-nickel Heat Exchanger Flow Switch Low Water ut-off Stack Frame Outdoor Installation Kit Registered under U.S. Patent No. 5,989,020 onventional Vents into conventional flue or vent breaching using Type double wall vent. * Requires factory supplied vent kit. * Outdoor Use when indoor space is a problem or if outdoor location gives better access. * E+ Directire Vent with Sidewall Inlet Draws fresh combustion air from an outside wall horizontally, and vents combustion by-products through a vertical flue. Direct Vent Vertical Draws fresh combustion air from outside, and vents combustion by-products through a vertical flue. * Direct Vent Horizontal Draws fresh combustion air from outside and vents combustion by-products through a side wall.

16 EfficiencyPac Water Heater When you depend on hot water to stay in business, you should expect your water heater to work smarter, not harder! Traditional tank-type water heaters build up lime scale deposits when they heat water. This makes the water heater work harder, which leads to reduced efficiency, increased fuel costs, and shorter tank life. Lime scale build-up can cause a typical tank-type unit to fail in as few as 4 5 years. Sometimes less! The Efficiency Pac from Lochinvar combines the high efficiency of an Efficiency+ (EW series) water heater with the durability of a Lock-Temp baffled storage tank to create a water heating system that performs at peak efficiency year after year. Thermal Efficiency the Efficiency Pac delivers a remarkable 84% thermal efficiency. Most tank-type units peak at 80%. No Lime Scale uild-up the Efficiency Pac limits lime scale build-up with the scrubbing action of water flow through the solid copper-tube heat exchanger. Unsurpassed Delivery the Lock-Temp storage tank employs a baffle that allows 80% tank draw down without a drop in temperature. When combined with an 84% efficient water heater, the results are a First Hour Delivery that can t be beat - 274 gallons for an EPN200-85. Direct-Venting onvenience The Efficiency Pac can draw its combustion air directly from outdoors. This feature prevents contamination from airborne dirt particles and chemicals, while isolating the water heater from negative air pressures often found in restaurants and mechanical rooms. Standard Features Optional Equipment 84% Thermal Efficiency djustable High Limit Sealed ombustion hamber w/ Manual Reset Stainless Steel urners larm ell Low NOx Operation Exceeds the most ontacts on any Failure Stringent ir Quality Requirements upro-nickel Heat Exchanger SME opper Finned Tube Flow Switch Heat Exchanger Low Water ut-off 160 psi Working Pressure Gasketless Heat Exchanger Design ll ronze irculating Pump Pump Delay w/ Freeze Protection Manual Reset High Limit utomatic Reset High Limit Glass-Lined Water Surfaces Loch-Heat eramic Tile ombustion hamber Hot Surface Ignition SME Pressure Relief Valve (Heater) R16 Foam Insulated, Glass-Lined Storage Tank 24 Volt ontrol System SME Temperature & Pressure Relief Valve (Tank) rass Drain Valve (Tank) 3 Year Limited Warranty on Heat Exchanger 5 Year Limited Warranty on Tank 1 Year Limited Warranty on Parts Model tu/hr Gallon GPH @ Vent Shipping Number Input apacity 100 F Rise D E F G H Size Weight EPN150-085 150,000 85 153 78-1/2 28 40 14-1/2 50-1/4 30-1/2 21-3/4 9 5 728 EPN200-085 199,999 85 204 78-1/2 28 40 14-1/2 50-1/4 34-1/2 23-3/4 9 5 716 EPN200-100 199,999 100 204 75 32 44 16-1/2 47 34-1/2 23-3/4 11 5 811 EPN250-100 250,000 100 255 75 32 44 16-1/2 47 38-1/4 25-1/2 11 6 839 EPN300-100 300,000 100 305 75 32 45-3/4 16-1/2 47 42 27-1/2 11 6 857 Note: hange N to L for LP gas models. (no deration for LP). ir inlet dimensions equal vent diameter. Vent size denotes conventional vent. Performance data is based on manufacturer test results. old water inlet is 2 copper. Hot water outlet is 1-1/2 copper. Gas connections are 3/4 NPT.

17 opper-fin 90,000 to 500,000 tu/hr Models High efficiency opper-fin water heaters combine the benefits of a copper finned tube heat exchanger with the simplicity of atmospheric combustion to provide a durable, trouble-free design with quick and easy component removal for service simplicity. nd with the Lochinvar etter Idea system, you combine the highly efficient opper-fin water heater with a separate Lock-Temp storage tank and manifold piping. y separating the water heater and storage tank, stand-by losses are virtually eliminated and operating efficiency is enhanced. 82 %THERML EFFIIENY For additional flexibility, the opper-pak starts with a Lock-Temp storage tank and places a opper-fin water heater directly on top in a unique space saving design. The circulator pump and piping are all in place and the unit is ready to be installed as a single package. Model tu/hr GPH @ Vent Gas Shipping Number Input 100ºF Rise D E Size onn. Weight WN090PM 90,000 89 29-1/2 15-1/2 21-1/2 7-3/4 6-1/4 5 1/2 175 WN135PM 135,000 134 29-1/2 19-1/2 21-1/2 9-3/4 6-1/4 6 1/2 195 WN180PM 180,000 179 29-1/2 23-1/2 21-1/2 11-3/4 7-1/4 7 3/4 220 WN199PM 199,999 198 29-1/2 26-1/2 21-1/2 13-1/4 7-1/4 7 3/4 230 WN225PM 225,000 224 29-1/2 26-1/2 21-1/2 13-1/4 7-1/4 7 3/4 235 WN270PM 270,000 268 29-1/2 29 1/2 21 1/2 14 3/4 7-1/4 8 3/4 240 WN315PM 315,000 313 29-1/2 32-1/2 21-1/2 16-1/4 6-1/4 8 3/4 250 WN360PM 360,000 358 29-1/2 35-1/2 21-1/2 17-3/4 8-1/4 9 1 270 WN399PM 399,999 397 29-1/2 44-1/2 22 22-1/4 5-1/2 10 1 340 WN500PM 500,000 497 34-1/2 52-1/2 22 26-1/4 9-1/2 10 1 365 Notes: hange N to L to denote L.P. gas models Inlet water connections are 1-1/2 NPT and outlet water connections are 2 NPT on 6-1/4 centers Electrical Requirements: 120 V / 2.5 MP pproved for indoor installation only Performance data based on manufacturer test results Standard Features 82% Thermal Efficiency uilt-in Draft Diverter Stainless Steel urners SME opper Finned Tube Heat Exchanger 160 psi Working Pressure Gasketless Heat Exchanger Design ll ronze irculating Pump Pump Delay/Freeze Protection Remote Tank Thermostat Glass-Lined Water Surfaces Loch-Heat eramic Tile ombustion hamber SME Temperature & Pressure Relief Valve utomatic Reset High Limit Manual Reset High Limit Self Diagnostic Indicator Lights Terminal Strip 24 Volt ontrol System S Design ertified for lcove Installation S Design ertified for Installation on ombustible Floors 3 Year Limited Warranty on Heat Exchanger Firing ontrols F1 - Standing Pilot (Standard W 90-270) F9 - Intermittent Spark Ignition (Standard W 315-500) F13 - GE GP/FM/IRI F7 - alifornia ode (W 225-500) Optional Equipment djustable High Limit w/ Manual Reset ontacts on any Failure (W 315-500) ontacts for ir Louvers (W 315-500) upro-nickel Heat Exchanger Flow Switch Low Water ut-off Multi-Stack Frame PV Venting Kit (W 90-135)

18 Low NOx harger & Ultra Low NOx harger & Gas Models Low NOx Models 1 NPT RELIEF VLVE OPENING INLET D GS ONNETION E 1 LERNE Model tu/hr apacity GPH @ Vent Gas Water Shipping Number Input Gallons 100 F Rise D E Size onn onn Weight XN120 070 120,000 71 115 63 27-3/4 52 19-11/16 4-1/4 5 3/4 1-1/2 520 XN155 080 154,000 81 148 68 27-3/4 54-3/4 20-1/2 4-1/2 6 3/4 1-1/2 550 XN180 100 180,000 99 173 72 27-3/4 61 20-1/2 4-1/2 6 3/4 1-1/2 550 XN199 100 () 199,000 100 191 72 27-3/4 61 20-1/2 4-1/2 6 3/4 1-1/2 660 XN250 100 () 250,000 100 240 72 27-3/4 61 20-1/2 4-1/2 6 3/4 1-1/2 660 XN275 100 () 275,000 100 264 72 27-3/4 61 20-1/2 4-1/2 6 3/4 1-1/2 660 XN310 085 () 310,000 85 297 73 27-3/4 63 22-1/2 4-1/2 6 3/4 1-1/2 720 XN365 085 () 366,000 85 351 73 27-3/4 63 22-1/2 4-1/2 6 1 1-1/2 830 XN400 085 () 390,000 85 374 73 27-3/4 63 22-1/2 4-1/2 6 1 1-1/2 830 = SME onstruction See the installation manual for dimensional information on Top and ack Tappings Standard Features: 80% Thermal Efficiency Low NOx Operation Multi-Flue Design Glass Lined Tank 150 PSI Working Pressure Tank Saver node Ultra Low NOx Models SME Temperature & Pressure Relief Valve utomatic Reset High Limit Spark Ignition 180 F Operation pproved ombustible Floor pproved Steel Jacket with Foam Insulation Hand Hole leanout Slide Out urner Tray 3 Year Limited Warranty on Tank 1 Year Limited Warranty on Parts Optional Equipment: UL Sanitation High ltitude (2,000 to 8,000 feet) Models LN120 080 - LN199 100 Models LN250 100 - LN400 085 TOP 1-1/2 NPT TOP INLET 1-1/2 NPT TOP 1 1/2" NPT TOP INLET 1 1/2" NPT D D E TOP VIEW E TOP VIEW FRONT VIEW FRONT VIEW Model tu/hr apacity GPH @ Vent Gas Water Shipping Shipping Number Input Gallons 100 F Rise D E Size onn onn Weight Weight (SME) LN120 080 120,000 81 119 68-1/4 27-3/4 58-1/4 26-1/4 9-1/2 6 3/4 1-1/2 750 - LN155 080 154,000 81 153 68-1/4 27-3/4 58-1/4 26-1/4 9-1/2 6 3/4 1-1/2 750 - LN180 100 180,000 93 179 76 27-3/4 65-3/4 25-3/4 9-1/2 6 3/4 1-1/2 835 - LN199 100 199,000 93 198 76 27-3/4 65-3/4 25-3/4 9-1/2 6 3/4 1-1/2 835 - LN250 100() 250,000 93 248 76 27-3/4 65-3/4 25-3/4 9-1/2 6 3/4 1-1/2 835 880 LN275 085() 275,000 85 271 76 27-3/4 65-3/4 25-3/4 16-1/4 6 3/4 1-1/2 850 900 LN310 085() 310,000 85 306 76 27-3/4 65-3/4 25-3/4 16-1/4 6 3/4 1-1/2 850 900 LN366 085() 366,000 85 361 76 27-3/4 65-3/4 25-3/4 16-1/4 6 3/4 1-1/2 850 900 LN400 085() 390,000 85 385 76 27-3/4 65-3/4 25-3/4 16-1/4 6 3/4 1-1/2 850 900 = SME onstruction See the installation manual for dimensional information on Top and ack Tappings Standard Features: 82% Thermal Efficiency Meets SQMD Rule 1146.2 Multi-Flue Design Glass Lined Tank 150 PSI Working Pressure Tank Saver node SME Temperature & Pressure Relief Valve utomatic Reset High Limit Spark Ignition 180 F Operation pproved ombustible Floor pproved Steel Jacket with Foam Insulation Hand Hole leanout Slide Out urner Tray 3 Year Limited Warranty on Tank 1 Year Limited Warranty on Parts Optional Equipment: UL Sanitation

19 Multi-Flue harger Gas Models INDUED DRFT MOTOR 1 NPT RELIEF VLVE OPENING I 1 NPT RELIEF VLVE OPENING INLET INLET D D E E GS ONNETION 1 LERNE GS ONNETION 1 LERNE MODELS G120-400 MODEL G-500 Model tu/hr apacity GPH @ Vent Gas Water Shipping Number Input Gallons 100 F Rise D E Size onn onn Weight GN120 070 120,000 71 116 69-3/4 27-3/4 52 19-3/4 4-1/4 6 1/2 1-1/2 400 GN150 032 150,000 32 145 45 27-3/4 42-1/2 15-3/4 5 6 3/4 1-1/2 460 GN155 080 154,000 81 149 73 27-3/4 59 19-3/4 4-1/4 6 1/2 1-1/2 470 GN180 080 180,000 81 175 67-1/2 27-3/4 54-3/4 20-1/2 4-1/2 6 1/2 1-1/2 470 GN200 032 199,000 32 194 45 27-3/4 42-1/2 15-3/4 5 6 3/4 1-1/2 460 GN200 080 199,000 81 193 67-1/2 27-3/4 54-3/4 20-1/2 4-1/2 6 1/2 1-1/2 470 GN200 100 199,000 100 193 75 27-3/4 62-3/4 20-1/2 4-1/2 6 1/2 1-1/2 603 GN199 100 () 199,000 100 193 72 30-1/4 56-1/2 19-3/4 4-1/2 6 1/2 2 630 GN250 100 () 250,000 100 242 72 30-1/4 56-1/2 19-3/4 4-1/2 8 1/2 2 630 GN250 065 () 251,000 65 243 75 27-3/4 58-3/4 20 4-1/2 8 1/2 1-1/2 750 GN275 100 () 275,000 100 267 72 30-1/4 56-1/2 19-3/4 4-1/2 8 1/2 2 630 GN305 065 () 305,000 65 296 75 27-3/4 58-3/4 20 4-1/2 8 1/2 1-1/2 750 GN365 085 () 365,000 85 354 79-1/2 27-3/4 63 22-1/2 4-1/2 8 3/4 1-1/2 725 GN400 100 () 390,000 100 378 75-1/2 30-1/4 59 26-3/4 4-1/2 8 3/4 2 760 GN500 085 () 500,000 85 485 82-1/4 27-3/4 65-3/4 25-1/2 4-1/2 8 1 1-1/2 820 = SME construction See the installation manual for dimensional information on Top and ack Tappings Standard Features: Optional Equipment: 80% Thermal Efficiency Multi-Flue Design Glass Lined Tank 150 PSI Working Pressure Tank Saver node SME Temperature & Pressure Relief Valve utomatic Reset High Limit Spark Ignition 180 F Operation pproved ombustible Floor pproved Steel Jacket with Foam Insulation Hand Hole leanout Slide Out urner Tray 3 Year Limited Warranty on Tank 1 Year Limited Warranty on Parts UL Sanitation High ltitude (2,000 to 8,000 feet)

20 Light Duty harger Gas Models INLET INLET T&P VLVE T&P VLVE D D GS ONNETION GS ONNETION E E GN065 065 GN075 075 & GN075 100 Model tu/hr apacity GPH @ Vent Gas Water Shipping Number Input Gallons 100 F Rise D E Size onn onn Weight GN065 065 65,000* 65 60 65 24 61-1/2 61-1/2 15-1/2 4 1/2 3/4 240 GN075 075 75,100 74 73 61 26-1/2 59-1/2 59-1/2 15-1/4 4 1/2 1 271 GN075 100 75,100 98 73 68-1/2 26-1/2 67-1/2 67-1/2 15-1/4 4 1/2 1-1/4 350 * Propane model rated at 55,000 tu/hr Standard Features: 80% Thermal Efficiency Low NOx operation Single Flue Design Glass Lined Tank 150 PSI Working Pressure Tank Saver node SME Temperature & Pressure Relief Valve utomatic Reset High Limit Standing Pilot 180 F Operation pproved ombustible Floor pproved Steel Jacket with Foam Insulation utomatic Flue Damper Hand Hole leanout Rated up to 7,700 Feet ltitude 3 Year Limited Warranty on Tank 1 Year Limited Warranty on Parts

21 ustom Hi-Power Vertical nd Horizontal Models J 208V 1ø K 208V 3ø 240V 1ø 240V 3ø W 277V 1ø kw * VOLTGE SHEDULE = Voltage = Kilowatt Y 380V 3ø Z 415V 3ø X 480V 3ø N 600V 3ø Max. Gal. Water Shipping Model KW ap. D onn. Weight Vertical Round Inlet Outlet (.lbs) HV*kW-150 135 150 65-1/2 32 38-3/4 7-3/4 1-1/2 1-1/2 650 HV*kW-200 180 200 78 32 38-3/4 7-3/4 1-1/2 1-1/2 750 HV*kW-250 216 250 92 34 40-3/4 19-1/2 1-1/2 1-1/2 1,165 HV*kW-300 270 300 80 40 46-3/4 21 2 2 1,350 HV*kW-400 360 400 80 46 52-3/4 22-1/2 2 2 1,590 HV*kW-500 396 500 92 46 52-3/4 22-1/2 2 2 1,700 HV*kW-600 396 600 92 52 60-3/4 24-1/2 2-1/2 2-1/2 2,010 HV*kW-800 396 750 104 52 60-3/4 24-1/2 2-1/2 2-1/2 2,450 HV*kW-1000 396 950 128 52 60-3/4 24-1/2 2-1/2 2-1/2 3,160 NOTES: Vertical Round models above 90 kw at 208V, 240V or 380V, and 162 kw at 415V, 480V, or 600V exceed the capacity of a single control box and may require multiple control panels. onsult the factory for specific details and optional construction. Vertical Square construction is available as an option for models that exceed the listed kw limits. ontrol panel height on Vertical Round models may exceed tank height consult factory for specific heights on models with inputs above 72 kw. Vertical Square HV*kW-1250 900 1,250 132-1/2 64-1/2 64-1/2 23-1/4 3 3 3,560 HV*kW-1500 900 1,500 128-1/2 70-1/2 70-1/2 25-1/4 3 3 4,120 HV*kW-2000 900 2,000 140-1/2 76-1/2 76-1/2 27-1/4 3 3 4,350 HV*kW-2500 900 2,500 146-1/2 82-1/2 82-1/2 29 3 3 5,750 Horizontal Square HH*kW-150 135 150 37 68-1/2 34-1/4 12 2 2 1,180 HH*kW-200 180 200 37 78 34-1/4 12 2 2 1,370 HH*kW-250 225 250 39 90-1/4 36-1/4 13 2 2 1,450 HH*kW-300 270 300 45 78-1/4 42-1/4 14-3/4 2 2 1,530 HH*kW-400 360 400 52 78-1/4 48-1/4 16 2 2 1,750 HH*kW-500 450 500 52 90-3/4 48-1/4 16 2 2 1,860 HH*kW-600 540 600 58 90-3/4 54-1/4 13-1/2 2-1/2 2 2,340 HH*kW-800 720 750 58 102-1/4 54-1/4 13-1/2 2-1/2 2 2,850 HH*kW-1000 900 950 58 126-1/4 54-1/4 13-1/2 2-1/2 2 3,040 HH*kW-1250 900 1,250 64 130-1/4 60-1/4 15 3 3 3,750 HH*kW-1500 900 1,500 70 126-1/4 66-1/4 16 3 3 4,340 HH*kW-2000 900 2,000 76 137-1/4 72-1/4 17-1/2 3 3 4,580 HH*kW-2500 900 2,500 82 144-1/4 78-1/4 16-1/2 3 3 6,060

22 ustom Hi-Power Standard Features Glass Lined Steel Tank Incoloy Heating Elements Internal Fusing (above 120 amps) Enamel Finished Galvanized Steel Jacket Magnesium Tank Saver nodes Immersion Thermostat Manual Reset High Limit Full Length Hinged Doors with Key Lock Terminal lock onnections SME Temperature and Pres sure Relief Valve (Supplied, not installed) hannel Iron Skid ase (except 150 & 200 gallon round or larger) pproved for 180 F Temperature Operation SME onstruction and Na tion al oard Listed ll models meet or exceed SHRE energy efficiency standards 125 psi Working Pressure Handhole or leanout UL Listed (U.S. & anada) Safety Drain Pan (Square Models) ontrol Voltage on/off Switch w/ Light 3 Year Limited Tank Warranty 1 Year Limited Parts Warranty ommercial Electric Models Optional Equipment Low Water ut-off Pilot Lights Manual Limiting Switches larm ell Shunt Trip Disconnect* Low or High Water Pressure Switch Lifting Lugs Time lock (7 day or 24 hour) Safety Door Interlock MS Enable/Disable ontacts Temperature and Pressure Gauges Manway (125 Gallon and Larger Only) 150 psi or 160 psi Working Pressure Electronic Step ontroller Seismic attachment points (Must have seismic zone or city and state of install) *Field Installed Vertical Round 150-1000 Vertical Square 1250-2500 Horizontal Square 150-2500

23 Standard Hi-Power Thermostat and Immersion Electric Models Outstanding Features Immersion ontrols - LD readout displays operational and diagnostic information in words, not codes. Standard features include: Low Water utoff, Element Sensing and Night Setback. Surface ontrols - Surface mounted thermostats on each heating element. Glass-Lined Steel Tank The durable glass lining is fused to the tank at 1600 F to assure lasting protection against rust and corrosion while providing clean, clear hot water. 300 psi test pressure provides 150 psi working pressure. Tank Saver node large diameter, high capacity anode inhibits corrosion of the tank interior for long, trouble-free service. Heating Elements Plated, incoloy immersion type heating elements provide long life and resistance to lime scale build-up. The low watt density elements have lower surface temperatures and more surface area. Standard Voltages 208, 240 and 480 are wired from the factory for three phase. The three phase wiring can be field converted to single phase. (277 is configured as single phase only.) Energy ut-off Shuts off electrical power to the elements should the water temperature in the tank exceeds 200 F. Overcurrent Protection Fuses ll elements and controls are fused in accordance with U.L. requirements when current exceeds 48 amps. SME Temperature and Pressure Relief Valve - Factory provided. Non-F Foam Insulation Superior material formulation provides uniform tank coverage with a thick blanket of insulating foam. This non-f polyurethane closed cell foam minimizes standby losses and maximizes heat retention. Hinged ccess Door Provides easy access from front of heater to electrical controls. 3 Year Limited Tank Warranty, 1-Year Limited Parts Warranty See warranty for details MPERGE TLE Single Phase Three Phase KW 208V 240V 277V 480V 208V 240V 480V 6 28.8 25.0 21.7 12.5 16.7 14.4 7.2 9 43.3 37.5 32.5 18.8 25.0 21.7 10.8 12 57.7 50.0 43.3 25.0 33.3 28.9 14.4 13.5 64.9 56.3 48.7 28.1 37.5 32.5 16.2 15 72.1 62.5 54.2 31.3 41.6 36.1 18.0 18 86.5 75.0 65.0 37.5 50.0 43.3 21.7 24 115.4 100.0 86.6 50.0 66.6 57.7 28.9 27 129.8 112.5 97.5 56.3 74.9 65.0 32.5 30 144.2 125.0 108.3 62.5 83.3 72.2 36.1 36 173.1 150.0 130.0 75.0 99.9 86.6 43.3 40.5 194.7 168.8 146.2 84.4 112.4 97.4 48.7 45 216.3 187.5 162.5 93.8 124.9 108.3 54.1 54 N/ 225.0 194.9 112.5 149.9 129.9 65.0 VOLTGE SHEDULE T - 208V / 1 or 3 PH W - 277V / 1 PH P - 240V / 1 or 3 PH X - 480V / 1 or 3 PH

24 Standard Hi-Power Thermostat and Immersion Electric Models Dimensions & Specifications T&P T&P 1-1/4 WTER ONDUIT OPENING DRIN VLVE 1-1/4 INLET OPENING DRIN VLVE 1-1/4 INLET OPENING 5-1/4 5-1/4 Surface Model Immersion Model Model Gallon GPH @ Number of Shipping Number KW apacity 100 F Rise Elements Weight H(X)06 050 6 50 25 3 55-3/4 21-3/4 27 265 H(X)09 050 9 50 37 3 55-3/4 21-3/4 27 265 H(X)12 050 12 50 49 3 55-3/4 21-3/4 27 265 H(X)13 050 13.5 50 55 3 55-3/4 21-3/4 27 265 H(X)15 050 15 50 61 3 55-3/4 21-3/4 27 265 H(X)18 050 18 50 74 3* 55-3/4 21-3/4 27 265 H(X)24 050 24 50 98 6 55-3/4 21-3/4 27 265 H(X)27 050 27 50 111 6 55-3/4 21-3/4 27 265 H(X)30 050 30 50 123 6 55-3/4 21-3/4 27 265 H(X)36 050 36 50 148 6** 55-3/4 21-3/4 27 265 H(X)40 050 40.5 50 166 9 55-3/4 21-3/4 27 265 H(X)45 050 45 50 194 9 55-3/4 21-3/4 27 265 H(X)54 050 54 50 221 9 55-3/4 21-3/4 27 265 H(X)06 080 6 80 25 3 60-1/4 25-1/2 31 280 H(X)09 080 9 80 37 3 60-1/4 25-1/2 31 280 H(X)12 080 12 80 49 3 60-1/4 25-1/2 31 280 H(X)13 080 13.5 80 55 3 60-1/4 25-1/2 31 280 H(X)15 080 15 80 61 3 60-1/4 25-1/2 31 280 H(X)18 080 18 80 74 3* 60-1/4 25-1/2 31 280 H(X)24 080 24 80 98 6 60-1/4 25-1/2 31 280 H(X)27 080 27 80 111 6 60-1/4 25-1/2 31 280 H(X)30 080 30 80 123 6 60-1/4 25-1/2 31 280 H(X)36 080 36 80 148 6** 60-1/4 25-1/2 31 280 H(X)40 080 40.5 80 166 9 60-1/4 25-1/2 31 280 H(X)45 080 45 80 194 9 60-1/4 25-1/2 31 280 H(X)54 080 54 80 221 9 60-1/4 25-1/2 31 280 H(X)06 119 6 119 25 3 62-1/4 29-1/2 35 390 H(X)09 119 9 119 37 3 62-1/4 29-1/2 35 390 H(X)12 119 12 119 49 3 62-1/4 29-1/2 35 390 H(X)13 119 13.5 119 55 3 62-1/4 29-1/2 35 390 H(X)15 119 15 119 61 3 62-1/4 29-1/2 35 390 H(X)18 119 18 119 74 3* 62-1/4 29-1/2 35 390 H(X)24 119 24 119 98 6 62-1/4 29-1/2 35 390 H(X)27 119 27 119 111 6 62-1/4 29-1/2 35 390 H(X)30 119 30 119 123 6 62-1/4 29-1/2 35 390 H(X)36 119 36 119 148 6** 62-1/4 29-1/2 35 390 H(X)40 119 40.5 119 166 9 62-1/4 29-1/2 35 390 H(X)45 119 45 119 194 9 62-1/4 29-1/2 35 390 H(X)54 119 54 119 221 9 62-1/4 29-1/2 35 390 Immersion thermostat model numbers shown above. hange to S for surface thermostat models. * 208V models equipped with 6 elements. ** 208V models equipped with 9 elements.

25 ompact SME Hi-Power Electric Models Outstanding Features dvanced Electronic ontrols Glass-Lined Steel Tank Powered node Heating Element Energy ut-off SME Temperature and Pressure Relief Valve Non-F Foam Insulation Hinged ccess Door Immersion Thermostats with ontactors 3 Year Limited Tank Warranty, 1-Year Limited Parts Warranty See warranty for details Optional Equipment 150 PSI Working Pressure High and/or Low Water Pressure Limit Switches larm Horn Temperature & Pressure Gauge 4 x 6 Handhole leanout Pilot Lights & Switches Modulating ontrol HINGED ESS DOOR 3/4 NPT RELIEF VLVE OPENING ONDUIT OPENING VOLTGE SHEDULE - 240V / 1 PH Z - 415V / 3 PH J - 280V / 1 PH V - 480V / 1 PH K - 208V / 3 PH X - 480V / 3 PH - 240V / 3 PH M - 575V / 3 PH W - 277V / 1 PH N - 600V / 3 PH Y - 380V / 3 PH D Model Gal. Max. Water Shipping Number ap. kw D onn. Weight H(X)kW 005 5 3 20-1/2 16-1/4 22-1/2 5-1/4 3/4 100 H(X)kW 010 10 6 26-1/4 18-3/4 25 5-1/4 3/4 116 H(X)kW 020 20 18 27-1/4 20-1/2 26-1/2 5-3/4 3/4 145 H(X)kW 030 30 24 35-3/4 20-1/2 26-1/2 5-3/4 3/4 168 H(X)kW 040 40 36 45-3/4 20-1/2 26-1/2 5-3/4 3/4 206 H(X)kW 050 50 90 54-3/4 20-1/2 26-1/2 5-3/4 3/4 235 H(X)kW 065 65 90 54 26-1/2 33-1/2 7 1-1/4 280 H(X)kW 080 80 90 52-1/4 28 35 7 1-1/4 300 H(X)kW 100 100 90 60-1/2 28 35 7 1-1/4 354 H(X)kW 120 120 90 65-1/2 30 37 7-1/2 1-1/4 430 NOTE: llow 24 clearance from front access panel for service and maintenance. Note: Outlet connection for 5 thru 50 models 3/4 NPT. Outlet connection for 65 thru 120 models 1-1/4 NPT. mperage Table SINGLE PHSE THREE PHSE kw 208V 240V 277V 480V 208V 240V 480V 3 14.4 12.5 10.8 6.3 8.3 7.2 3.6 6 28.8 25.0 21.7 12.5 16.7 14.4 7.2 9 43.3 37.5 32.5 18.8 25.0 21.7 10.8 12 57.7 50.0 43.3 25.0 33.3 28.9 14.4 15 72.1 62.5 54.2 31.3 41.6 36.1 18.0 18 86.5 75.0 65.0 37.5 50.0 43.3 21.7 24 115.4 100.0 86.6 50.0 66.6 57.7 28.9 30 144.2 125.0 108.3 62.5 83.3 72.2 36.1 36 173.1 150.0 130.0 75.0 99.9 86.6 43.3 45 216.3 187.5 162.5 93.8 124.9 108.3 54.1 54 N/ 225.0 194.9 112.5 149.9 129.9 65.0 60 75 N/ N/ 250.0 216.6 N/ N/ 125.0 156.3 166.5 208.2 144.3 180.4 72.2 90.2 90 N/ N/ N/ 187.5 249.8 216.5 108.3 Note: ll SME models with an amp draw in excess of 120 amps recieve factory installed internal fusing. GPH Recovery Rate INPUT Recovery Rate ( GPH @ F Rise) kw tu/hr 30 F 40 F 50 F 60 F 70 F 80 F 90 F 100 F 110 F 120 F 130 F 140 F 3 10,239 41 31 34 20 17 15 13 12 11 10 10 9 6 20,478 82 62 49 41 35 31 27 25 22 21 19 18 9 30,717 123 92 74 62 53 46 41 37 34 31 28 26 12 40,956 164 123 98 82 70 61 55 49 45 41 38 35 15 51,195 205 154 123 102 88 77 68 61 56 51 47 44 18 61,434 246 184 148 123 105 92 82 74 67 62 57 53 24 81,912 328 246 197 164 140 123 109 98 90 82 76 70 30 102,390 410 308 246 205 176 154 137 123 112 103 95 88 36 122,868 492 369 295 246 211 184 164 148 134 123 113 105 45 153,585 615 461 369 307 263 230 205 184 168 154 142 132 54 184,302 738 554 443 359 316 277 246 221 201 185 170 158 60 204,780 819 615 492 410 351 307 273 246 223 205 189 176 75 255,975 1,025 768 615 512 439 384 341 307 279 256 236 219 90 307,710 1,229 922 738 615 527 461 410 369 335 307 284 263

26 Light Duty ommercial Electric Models Standard Features Non-Simultaneous or Simultaneous Wiring Glass Lined Steel Tank Non-F Foam Insulation djustable Thermostats utomatic Overheat Protection Tank Saver node Single or Three Phase Wiring SME Temperature & Pressure Relief Valve 3- Year Limited Tank Warranty, 1-Year Limited Parts Warranty See warranty for details. Point-of-Use models 3/4 (FEMLE) NPT 3/4 NPT RELIEF VLVE OPENING ELETRIL ONNETION INLET 3/4 (FEMLE) NPT LTERNTE 3/4 (FEMLE) NPT FRONT VIEW EJ 6/10/15/20 OX 3-3/4 Light Duty ommercial Models Short models 3/4 NPT RELIEF VLVE OPENING RSS DRIN VLVE FRONT VIEW ES 30/40/50 Model Gallon Shipping Number apacity D Weight Point-of-Use Models EJW006S 6 15-1/2 14-1/4 11-35 EJW010S 10 18-1/4 18 12-1/2-54 EJW015S 15 26 18 20-1/2-58 EJW020S 20 22-1/4 21-3/4 15-1/2-73 Short Models ESX030KD 30 31 21-3/4 24-1/4 8 100 ESX040KD 40 32-1/4 24 25-1/2 8 125 ESX050KD 50 32-1/4 26-1/2 25-1/4 8 166 Tall Models ETX030KD 30 34-1/2 20-1/2-8 98 ETX040KD 40 45-1/4 20-1/2-8 113 ETX050KD 50 55 20-1/2-8 131 ETX065KD 66 60-3/4 21-3/4-8 176 ETX080KD 80 59-1/2 24-8 211 ETX120KD 119 62-1/2 29-1/2-8 326 3/4 (FEMLE) NPT 2-1/2 JUNTION OX D TOP VIEW ES 30/40/50 INLET 3/4 (FEMLE) NPT Tall models DRIN VLVE 3-3/4 Voltage Schedule (EJ Models) 120V 1 PH J 208V 1 PH 240V 1 PH W 277V 1 PH V 480V 1 PH (ES & ET Models) T 208V 3 PH P 240V 3 PH W 277V 1 PH X 480V 3 PH FRONT VIEW ET 30-120 3/4 (FEMLE) NPT JUNTION OX D TOP VIEW ET 30-120 Wattage Limits w/ Simultaneous Operation 208V - 10,000W (5,000W/5,000W) 240V - 11,000W (5,500W/5,500W) 277V - 12,000W (6,000W/6,000W) 480V - 12,000W (6,000W/6,000W) INLET 3/4 (FEMLE) NPT 3/4 NPT RELIEF VLVE OPENING 2-1/2 Element vailability Schedule Recovery Rate (GPH @ F RISE) Wattage 120V 208V 240V 277V 480V 40 F 70 F 100 F 130 F - 1500 Yes Yes Yes Yes N/ 16 9 6 5 D - 1650 N/ N/ N/ N/ N/ 17 10 7 5 E - 2000 Yes Yes Yes Yes N/ 21 12 8 6 F - 2500 Yes Yes Yes Yes Yes 26 15 10 8 G - 3000 Yes Yes Yes Yes Yes 31 18 12 10 H - 3500 N/ Yes Yes N/ N/ 36 21 14 11 J - 4000 N/ Yes Yes Yes Yes 41 24 17 13 K - 4500 N/ Yes Yes Yes Yes 47 27 19 14 M - 5000 N/ Yes* Yes* N/ Yes* 52 30 21 16 N - 5500 N/ N/ Yes* N/ N/ 57 32 23 17 P - 6000 N/ Yes Yes Yes Yes 62 35 25 19 Notes: Max Wattage for EJ-006 is 3000W * Indicates Not vailable for EJ-010 and EJ-015

27 Hot Water Generators Water to Water & Steam to Water Vertical Tanks Horizontal Tanks 3/4 Drain NOTE: Unit shown with optional water-to-water control package 3/4 Drain Steam to Water Optional ontrol Package Water to Water Optional ontrol Package Left hand or right hand configurations available.

28 Hot Water Generators Vertical and Horizontal Models Vertical Tanks Round Jacketed Model Gallon Maximum Shipping Number apacity D E oil Length Weight GV*0200JR 200 77-1/4 32 11-1/4 17-1/4 30 600 GV*0257JR 257 92 34 18 26 36 902 GV*0318JR 318 82 40 19-1/2 27-1/2 42 993 GV*0432JR 432 82 46 21 29 48 1269 GV*0504JR 504 92 46 21 29 48 1373 GV*0650JR 650 93 54-1/2 23-1/2 31-1/2 54 1966 GV*0752JR 752 105 54-1/2 23-1/2 31-1/2 54 2030 GV*0940JR 940 129 54-1/2 23-1/2 31-1/2 54 2376 * Indicates Tank Lining G=Glass =ement. Horizontal Tanks Round Jacketed Model Gallon Maximum Minimum Shipping Number apacity oil Length oil Length Weight GH*250JR 250 41 88 34 90 54 1,600 GH*300JR 300 47 76 40 78 48 1,800 GH*400JR 400 53 76 46 78 48 2,250 GH*500JR 500 53 88 46 90 54 2,500 GH*600JR 600 59 88 52 90 54 3,600 GH*700JR 700 59 100 52 102 66 4,200 GH*1000JR 1000 59 124 52 126 78 5,000 NOTE: Manway required on tanks with tube bundles 48 and longer. * Indicates Tank Lining G=Glass =ement Non-Jacketed Tanks Maximum Minimum Maximum Gallon Length** Diameter oil Length oil Length oil Length Shipping Model apacity (Height) (Width) D E (Horizontal) (Horizontal) (Vertical) Weight GV*147 147 48 30 15 3/4 23 3/4 36 30 36 400 GV*184 184 60 30 15 3/4 23 3/4 48 42 36 468 GV*220 220 72 30 15 3/4 23 3/4 60 48 36 548 GV*257 257 84 30 15 3/4 23 3/4 72 54 36 628 GV*294 294 96 30 15 3/4 23 3/4 84 66 36 701 GV*367 367 120 30 15 3/4 23 3/4 108 78 36 868 GV*265 265 60 36 17 1/2 25 1/2 48 42 42 577 GV*318 318 72 36 17 1/2 25 1/2 60 48 42 673 GV*370 370 84 36 17 1/2 25 1/2 72 54 42 770 GV*423 423 96 36 17 1/2 25 1/2 84 66 42 866 GV*528 528 120 36 17 1/2 25 1/2 108 78 42 1,058 GV*432 432 72 42 18 3/4 26 3/4 60 48 48 909 GV*504 504 84 42 18 3/4 26 3/4 72 54 48 1,050 GV*576 576 96 42 18 3/4 26 3/4 84 66 48 1,190 GV*720 720 120 42 18 3/4 26 3/4 108 78 48 1,470 GV*864 864 144 42 18 3/4 26 3/4 120 96 48 1,751 GV*658 658 84 48 20 3/4 28 3/4 72 54 54 1,346 GV*752 752 96 48 20 3/4 28 3/4 84 66 54 1,507 GV*940 940 120 48 20 3/4 28 3/4 108 78 54 1,828 GV*1128 1,128 144 48 20 3/4 28 3/4 120 96 54 2,150 GV*951 951 96 54 22 3/4 30 3/4 84 66 60 1,972 GV*1189 1,189 120 54 22 3/4 30 3/4 108 78 60 2,423 GV*1427 1,427 144 54 22 3/4 30 3/4 120 96 60 2,881 GV*1469 1,469 120 60 24 3/4 32 3/4 108 78 66 3,221 GV*1763 1,763 144 60 24 3/4 32 3/4 120 96 66 3,823 GV*2115 2,115 120 72 27 3/4 35 3/4 108 78 78 3,904 GV*2538 2,538 144 72 27 3/4 35 3/4 120 96 78 4,627 Note: hange V to H for Horizontal onfiguration * Indicates Tank Lining G= Glass =ement **dd 4 to Length (Height) for Vertical onfiguration

29 Squire Indirect Water Heater Models The Squire Stainless Steel Indirect Water Heater - with 12 models to choose from in capacities from 30-119 gallons, we are sure to have the right size indirect water heater to fit your application. Squire features important enhancements that our customers will recognize and benefit from such as a welded and passivated stainless steel tank and heat exchanger, two-inch thick, high-density insulating foam, and best of all an merican made product built in Lebanon, Tennessee. Outstanding Features 12 Squire Models to hoose From - 6 Standard Models from 30 to 119 Gallons - 6 Solar Models from 65 to 119 Gallons 316L Passivated Stainless Steel Tank 316L High apacity Stainless Steel oil Fully Welded onstruction TOP VIEW The Hot Water Outlet onnection is female NPT. ll other connections are male. Dimensions Domestic oil Model Water onnection Shipping Number D G H I onn. Size Wt. (lbs.) SIT030 39-1/2 20 32-1/4 21-3/4 8-1/4 3 1 1 79 SIT040 55-1/2 20 48-1/2 25-1/4 8-1/4 3 1 1 105 SIT050 47 24 39-3/4 24-1/2 9-1/4 3-3/4 1 1 131 SIT065 60 24 52-1/4 28 9-1/4 3-1/4 1-1/2 1 147 SIT080 69-1/2 24 61-3/4 28 9-1/4 3-1/4 1-1/2 1 177 SIT119 68-1/4 28 60-1/4 31-3/4 9-1/4 3-1/4 1-1/2 1 213 Heat Source Standby First ontinuous 1st Hour Min. Flow Friction Model apacity Water Volume Loss Draw Delivery Delivery oil Load Rate Loss Number (Gallons) (Gallons) ( F/Hr) Gals. (GPH) (Gallons) (tu/hr) (GPM) (Ft. Hd.) SIT030 27 1.1 1.5 24 160 183 99,000 14.0 3.9 SIT040 40 1.6 0.9 27 181 208 115,000 14.0 4.5 SIT050 52 1.7 0.9 47 209 255 133,000 14.0 5.3 SIT065 67 1.9 0.7 65 263 327 154,000 14.0 5.7 SIT080 82 2.1 0.6 74 266 347 160,000 14.0 5.7 SIT119 114 3.2 0.5 109 349 459 200,000 14.0 6.5 Performance data is based on I==R test results. ll ratings are based on 180 F boiler water temperature with incoming cold water at 50 F and a Delta T of 77 F. Includes tank sensor for use with KNIGHT Heating oiler. Optional thermostat available for use with other boiler models.

30 Solar Stainless Steel Indirect Water Heater Models Solar Stainless Steel Indirect Dimensions and Specifications SDT Models SET Models D FROM PNEL SOLR SENSOR WELL G TO PNEL SDT Models Dimensions and Specifications SET Models Dimensions and Specifications H I OLD WTER INLET Domestic oil Model Water onnection Shipping Number D E F G H I onn. Size Wt. (lbs.) SDT065 60 24 52-1/4 47-1/4 33-3/4 28 9-1/4 3-1/4 1-1/2 1 158 SDT080 69-1/4 24 61-3/4 53-3/4 40-1/4 28 9-1/4 3-1/4 1-1/2 1 188 SDT119 68 28 60-1/4 54-1/2 37-1/2 31-3/4 9-1/4 3-1/4 1-1/2 1 224 Heat oiler Heat Standby ontinuous 1st Hour Min. Flow Friction Model apacity Source Water Source Water Loss Delivery Delivery oil Load Rate Loss Number (Gallons) (Gallons) (Gallons) ( F/Hr) (GPH) (Gallons) (tu/hr) (GPM) (Ft. Hd.) SDT065 66 2.1 1.7 0.7 175 205 128,000 14.0 3.4 SDT080 79 2.1 1.7 0.6 175 208 128,000 14.0 3.4 SDT119 110 3.2 2.6 0.5 251 301 181,000 14.0 4.9 Performance data based on incoming cold water at 50 F and a Delta T of 77 F. Delivery ratings for boiler coil only. Includes tank sensor for use w/ KNIGHT Heating oiler. Domestic oil Model Water onnection Shipping Number D F H I onn. Size Wt. (lbs.) SET065 60 24 52-1/4 28 9-1/4 3-1/4 1-1/2 1 149 SET080 69-1/2 24 61-3/4 28 9-1/4 3-1/4 1-1/2 1 179 SET119 68-1/4 28 60-1/4 31-3/4 9-1/4 3-1/4 1-1/2 1 215 Electric Electric Heat Source Standby ontinuous 1st Hour Model apacity Water Loss Delivery Delivery Number (Gallons) (Gallons) ( F/Hr) (GPH) (Gallons) SET065 67 1.9 0.7 24 54 SET080 81 2.1 0.6 24 57 SET119 113 3.2 0.5 24 75 ll SET models: 4500w 240v 1 phase.

31 Lock-Temp Round Jacketed Storage Tanks Standard Features Energy Saving Performance - meet the requirements of the latest SHRE Energy Efficiency Standards. Five-Year Limited Warranty - against tank failure resulting from defects in materials or workmanship. Lock-Temp affle - creates nearly perfect stratification. Magnesium node - provide additional protection against corrosion. SME onstruction - in accordance with SME standards and labeled for 125 psi working pressure (standard) or 150 psi working pressure (optional). (RJS080 & RJS120 are non-sme construction) Galvanized Jacket - Heavy gauge jacket is and finished in durable acrylic enamel combining attractive appearance with maximum protection. Vertical Round Jacketed Glass Lined Tanks Model Gal. Shipping Weight Number ap. D E 125 psi 150 psi RJS080M 80 63 25-1/4 9-1/4 14-1/4-240 RJS085M 85 49-1/2 28 9-1/2 14-1/2-255 RJS120M 119 62 29-1/2 9-1/2 14-1/2-352 RJ120* 119 62-1/2 28 9-1/2 14-1/2-365 RJ175* 175 66-1/4 32 11-1/4 17-1/4-578 RJ200* 200 77-1/4 32 11-1/4 17-1/4-634 Glass Lined only * = SME onstruction / S = Standard onstruction 1-1/2 NPT ON 85 GLLON TNK SENSOR / QUSTT LOTION (2 ON 80, 85 & 120 GLLON) 500 Gallon Jacketed Tank. Vertical Round Jacketed SME Tanks Model Gal. Shipping Weight Number ap. D E 125 psi 150 psi R*0257 257 91 34 18 26 904 904 R*0318 318 80 40 19-1/2 27-1/2 987 987 R*0432 432 80 46 21 29 1,188 1,188 R*0504 504 92 46 21 29 1,329 1,329 R*0650 650 92 52 23-1/2 31-1/2 1,817 1,817 R*0752 752 104 52 23-1/2 31-1/2 2,030 2,030 R*0940 940 128 52 23-1/2 31-1/2 2,710 2,710 * Indicates tank lining. G=Glass Lined =ement lined t The manway is optional on 257 and 318 gallon glass-lined tanks. The manway is standard on 432 gallon glass lined tanks and larger. The manway is standard on all cement lined tanks. Horizontal Round Jacketed SME Tanks Model Gallon Shipping Weight Number apacity Diameter 125 psi 150 psi R*0250H 250 41 87 34 1,157 1,157 R*0300H 300 47 76 40 1,355 1,355 R*0400H 400 53 76 46 1,587 1,701 R*0500H 500 53 88 46 1,711 1,853 R*0600H 600 59 88 52 2,053 2,053 R*0700H 700 59 100 52 2,399 2,399 R*1000H 1,000 59 124 52 3,114 3,114 *Indicates Tank Linings G=Glass lined =ement lined t The manway is optional on 250 and 300 gallon glass-lined tanks. The manway is standard on 432 gallon glass lined tanks and larger. The manway is standard on all cement lined tanks. MNWY 1 DRIN TNK SENSOR / QUSTT LOTION 3 NPT MNWY IS STNDRD ON EMENT TNKS. TNK SENSOR / QUSTT LOTION MNWY IS STNDRD ON EMENT TNKS.

32 Lock-Temp Square Jacketed Storage Tanks Standard Features Energy Saving Performance - meet the requirements of the latest SHRE Energy Efficiency Standards. Five-Year Limited Warranty - against tank failure resulting from defects in materials or workmanship. Lock-Temp affle - creates nearly perfect stratification. Magnesium node - provide additional protection against corrosion. SME onstruction - in accordance with SME standards and labeled for 125 psi working pressure (standard) or 150 psi working pressure (optional). Galvanized Jacket - Heavy gauge jacket is and finished in durable acrylic enamel combining attractive appearance with maximum protection. uilt-in Safety Drain Pan System - Sealed base assembly with 3 /4 drain connection to protect against water damage from gasket or component leakage. hannel Iron Skid - Square jacket models furnished with skid for easy handling and installation. Vertical Square Jacketed SME Tanks Model Gal. Shipping Weight (lbs.) Number ap. D E 125 psi 150 psi TV*1250J 1,250 132-1/2 64-1/2 29-1/4 21-1/4 4,660 5,000 TV*1500J 1,500 128-1/2 70-1/2 31-3/4 25-3/4 6,200 6,637 TV*2000J 2,000 139 76-1/2 33-1/2 25-1/2 7,400 7,910 TV*2500J 2,500 146-1/2 82-1/2 35-1/4 28 9,000 9,632 TNK SENSOR / QUSTT LOTION * Indicates tank lining. G=Glass Lined =ement line t The manway is standard on these models. Horizontal Square Jacketed SME Tanks Model Gallon Shipping Weight (lbs.) Number apacity Depth 125 psi 150 psi TH*1250J 1,250 68-1/2 130-1/4 60-1/4 5,126 5,466 TH*1500J 1,500 74 1/2 126-1/4 66-1/4 6,820 7,257 TH*2000J 2,000 80-1/2 137 72-1/4 8,140 8,650 TH*2500J 2,500 86-1/2 144-1/4 78-1/4 9,900 10,532 *Indicates Tank Linings G=Glass lined =ement lined t The manway is standard on these models. Lock-Temp Stainless Steel Storage Tanks Standard Features Light-weight 316L stainless steel tank construction Diffuser tube to eliminate turbulance 150 PSI working pressure Exceeds SHRE Energy Efficiency Standards Textured, impact resistant polypropylene jacket ulbwell for control sensor 3/4" brass drain valve 10 year limited tank warranty 1-1/2 NPT HOT WTER 23 23 TOP VIEW D 1-1/4 T&P ONNETION 3 NPT TNK SENSOR / QUSTT LOTION MNWY IS STNDRD ON EMENT TNKS. F E SENSOR WELL FROM WTER HETER TO WTER HETER 3/4 DRIN VLVE (SHIPPED LOOSE) MNWY IS STNDRD ON EMENT TNKS. MNWY 1 DRIN Model Gallon Recirculation Shipping Number apacity D E F Tappings Wt. (lbs.) SJS060 60 36 28 28 14-1/4 9-1/4 9 1-1/2 138 SJS080 80 69-1/2 24 61-3/4 14-1/4 9-1/4 9 2 153 SJS119 119 68-1/4 28 60-1/4 14-1/2 9-1/2 9 2 198

33 Lock-Temp are Storage Tanks Dimensions Weights Tappings Gal. D V H Glass-Lined ement ap. Dia. Ht. Lgth. 125 psi 150 psi Lined 118 24 64-368 368-13-1/2 21-1/2 29-1/2 141 24 76-428 428-13-1/2 21-1/2 29-1/2 188 24 100-556 556-13-1/2 21-1/2 29-1/2 235 24 124-684 684-13-1/2 21-1/2 29-1/2 175 28 65 - - 353-11 17 16 200 28 76 - - 488-11 17-1/2 16 147 30 52 48 400 400 695 15-3/4 23-3/4 31-3/4 184 30 64 60 468 468 812 15-3/4 23-3/4 31-3/4 220 30 76 72 548 548 958 15-3/4 23-3/4 31-3/4 257 30 87 83 628 628 1,103 15-3/4 23-3/4 31-3/4 294 30 100 96 701 701 1,242 15-3/4 23-3/4 31-3/4 367 30 124 120 868 868 1,540 15-3/4 23-3/4 31-3/4 265 36 64 60 577 577 995 17-1/2 25-1/2 33-1/2 318 36 76 72 673 673 1,173 17-1/2 25-1/2 33-1/2 370 36 87 83 770 770 1,343 17-1/2 25-1/2 33-1/2 423 36 100 96 866 866 1,513 17-1/2 25-1/2 33-1/2 528 36 124 120 1,058 1,058 1,861 17-1/2 25-1/2 33-1/2 432 42 76 72 795 909 1,385 18-3/4 26-3/4 34-3/4 504 42 88 84 908 1,050 1,587 18-3/4 26-3/4 34-3/4 576 42 100 96 1,020 1,190 1,790 18-3/4 26-3/4 34-3/4 720 42 124 120 1,245 1,470 2,195 18-3/4 26-3/4 34-3/4 864 42 148 144 1,470 1,751 2,601 18-3/4 26-3/4 34-3/4 1,008 42 172 168 1,695 2,031 3,006 18-3/4 26-3/4 34-3/4 658 48 88 84 1,346 1,346 2,124 20-3/4 28-3/4 36-3/4 752 48 100 96 1,507 1,507 2,392 20-3/4 28-3/4 36-3/4 940 48 124 120 1,828 1,828 2,918 20-3/4 28-3/4 36-3/4 1,128 48 148 144 2,150 2,150 3,444 20-3/4 28-3/4 36-3/4 1,315 48 172 168 2,471 2,471 3,970 20-3/4 28-3/4 36-3/4 1,503 48 196 192 2,793 2,793 4,505 20-3/4 28-3/4 36-3/4 951 54 100 96 1,721 1,972 2,729 22-3/4 30-3/4 38-3/4 1,189 54 124 120 2,083 2,423 3,320 22-3/4 30-3/4 38-3/4 1,427 54 148 144 2,451 2,881 3,919 22-3/4 30-3/4 38-3/4 1,665 54 172 168 2,807 3,326 4,511 22-3/4 30-3/4 38-3/4 1,903 54 196 192 3,168 3,777 5,102 22-3/4 30-3/4 38-3/4 2,141 54 220 216 3,530 4,228 5,701 22-3/4 30-3/4 38-3/4 1,469 60 124 120 2,784 3,221 4,177 24-3/4 32-3/4 40-3/4 1,763 60 148 144 3,267 3,823 4,913 24-3/4 32-3/4 40-3/4 2,056 60 172 168 3,749 4,425 5,658 24-3/4 32-3/4 40-3/4 2,350 60 196 192 4,231 5,026 6,394 24-3/4 32-3/4 40-3/4 2,644 60 220 216 4,713 5,628 7,130 24-3/4 32-3/4 40-3/4 2,115 72 124 120 3,416 3,904 5,104 27-3/4 35-3/4 43-3/4 2,538 72 148 144 3,995 4,627 5,995 27-3/4 35-3/4 43-3/4 2,961 72 172 168 4,575 5,350 6,885 27-3/4 35-3/4 43-3/4 3,384 72 196 192 5,154 6,073 7,767 27-3/4 35-3/4 43-3/4 3,807 72 220 216 5,733 6,795 8,658 27-3/4 35-3/4 43-3/4 24 & 28 DIMETER TNKS 4 30 DIMETER ND LRGER TNKS

34 Energy Saver Residential Gas Models T&P Nat. Gas LP Gas 1st Model Gal. tu/hr tu/hr Hour GPH@ Energy Gas Vent Water Ship. Number ap. Input Input Rating 90 Rise Factor D E F onn. Size onn. Wt. Energy Saver Series - Short Models LSN030 35 30 35,500 32,000 60 36 0.61 50 18 40 46-1/2 13-1/2 8 1/2 3 or 4 3/4 112 LSN040 40 40 40,000 36,000 66 41 0.59 51-1/2 20 41 47-3/4 13 8 1/2 3 or 4 3/4 135 LSN050 40 50 40,000 37,000 80 41 0.58 53-1/4 24 42-1/2 48-3/4 13-1/2 8 1/2 3 or 4 3/4 175 Energy Saver Series - Tall Models LTN030 35 30 35,500 32,000 67 36 0.61 61-1/2 16 52 58 13 8 1/2 3 or 4 3/4 112 LTN040 40 40 40,000 32,000 70 41 0.59 61-3/4 18 51-3/4 58-1/4 13 8 1/2 3 or 4 3/4 138 LTN050 40 50 40,000 32,000 88 41 0.58 60-3/4 20 50-1/4 57 13 8 1/2 3 or 4 3/4 153 Notes: N indicates Natural gas, replace N with L to indicate LP gas model. Standard Features Flammable Vapor Ignition Resistant ompliant - The corrosion resistant chamber redirects air through a stainless steel flame arrestor plate to prevent flame rollout and flammable vapor ignition. resettable thermal switch shuts down the burner and pilot operation in the event of a flammable vapor ignition and also protects against lint, dust and oil buildup by shutting down when it detects significant air restriction. Electronic Gas ontrol - The gas control features advanced electronic and thermpile standing pilot for precise water temperature control with indicator lights for simplified diagnostics. Sight Glass - Provides unobstructed view into the combustion chamber for observation of burner and pilot flames. Low NOx urner - The patented burner design reduces NOx emissions by up to 33% with less than 40 ng/j of NOx. Non-F Foam Insulation - Superior material formulation proved uniform tank coverage with a thick blanket of insulating foam. This non-f polyurethane closed cell foam minimizes standby losses and maximizes heat retention. Glass-Lined Steel Tank - The durable glass lining is fused to the tank at 1600 F to assure lasting protection against rust and corrosion while providing clean, clear hot water. 300 psi test pressure provides 150 psi working pressure. Tank Saver node - large diameter, high capacity anode inhibits corrosion of the tank interior for long, trouble-free service. Heat Trap - The heat trap protects from heat loss through the water piping. Temperature & Pressure Relief Valve - (Factory installed) rass Drain Valve 6- Year Limited Tank & Parts Warranty* See warranty for details. 10-Year Extended Warranty vailable Residential applications only. *1-year limited tank & parts warranty when installed in a commercial application.

35 Specialty Residential Gas Models F TOP VIEW T&PVLVE 1/2"GS ONNETION D HOT ONNETION F OLD ONNETION E FRONT VIEW * Locationfor optional top-mounted T&PValve if orderedfromfactory. High Efficiency Model Shown Energy Star Model High Recovery and High Efficiency Models Nat. Gas LP Gas Model Gal. tu/hr tu/hr 1st Hr. GPH@ Energy Gas Vent Water Ship. Number ap. Input Input Rating 90 Rise Factor D E F onn. Size onn. Wt. High Recovery Models LTN040 50 40 50,000 45,000 75 51 0.60 61-3/4 20 51-3/4 58-1/4 13-1/4 8 1/2 4 3/4 138 LTN050 50 48 50,000 45,000 90 51 0.58 61 20 50-1/2 56-1/2 13-1/2 8 1/2 4 3/4 172 LTN050 65 50 65,000 62,500 93 67 0.58 64 22 54-1/4 59-1/2 15-1/2 8 1/2 4 3/4 195 LTN065 65 65 65,000 55,000 116 67 0.57 65 24 54-1/4 60 15-1/2 8 1/2 4 3/4 215 LTN075 75 74 75,100 75,100 N/ 81 N/ 61 26-1/2 50-1/4 57 14-3/4 16 1/2 4 1 275 LTN100 75 98 75,100 75,100 N/ 81 N/ 68-1/2 27-3/4 57-1/2 65 15-1/4 16 1/2 4 1-1/4 350 High Efficiency Models LSN040 40EF 40 40,000 36,000 67 41 0.62 51-1/2 22 41 47-3/4 13 8 1/2 3 or 4 3/4 147 LTN030 35EF 30 35,500 32,000 67 36 0.62 61-1/2 18 52 58 13 8 1/2 3 or 4 3/4 126 LTN040 40EF 40 40,000 36,000 70 41 0.62 61-3/4 20 51-3/4 58-1/4 13 8 1/2 3 or 4 3/4 150 LTN050 40EF 50 40,000 37,000 88 41 0.62 61 22 50-1/4 57-1/4 13 8 1/2 3 or 4 3/4 165 Energy Star Models LSN040 40ES 40 40,000 36,000 67 42 0.67 54 22 41 47-3/4 13 8 1/2 3 or 4 3/4 149 LTN040 40ES 40 40,000 36,000 67 42 0.67 64-1/4 20 51-3/4 58-1/4 13 8 1/2 3 or 4 3/4 152 LTN050 40ES 50 40,000 37,000 81 42 0.67 63-1/2 22 50-1/4 57-1/4 13 8 1/2 3 or 4 3/4 167 Notes: N indicates Natural gas, replace N with L to indicate LP gas model. Energy Star models receive an interlocking Flue Damper for higher Energy Factor. Standard Features Flammable Vapor Ignition Resistant ompliant Electronic Gas ontrol Sight Glass Low NOx urner Non-F Foam Insulation Glass-Lined Steel Tank Tank Saver node Heat Trap Temperature & Pressure Relief Valve - (Factory installed) rass Drain Valve 6- Year Limited Tank & Parts Warranty* See warranty for details. 10-Year Extended Warranty vailable Residential applications only. *1-year limited tank & parts warranty when installed in a commercial application.

36 Ultra Low NOx Residential Gas Models Model Gal. Input GPH @ 1st HR. Energy Gas Vent Water Ship. Number ap. tu/hr 90 F Rise Rating Factor D E F onn. Size onn. Wt. Ultra Low NOx Models - 6 Year Limited Warranty UTN030 30 30 30,000 31 50 0.61 60 16 56-1/2 48-1/2 13 8 1/2 3 or 4 3/4 105 UTN040 40 40 40,000 41 65 0.59 62-1/4 18 58-3/4 50-3/4 13 8 1/2 3 or 4 3/4 129 UTN050 40 50 40,000 41 75 0.58 61 20 57-1/2 49-1/2 13 8 1/2 3 or 4 3/4 151 High Efficiency Ultra Low NOx Models UTN040 40EF 40 40,000 41 70 0.62 62 20 58-1/2 50-3/4 13 8 1/2 3 or 4 3/4 138 UTN050 40EF 50 40,000 41 75 0.62 61 22 57-1/2 49-1/2 13 8 1/2 3 or 4 3/4 160 High Efficiency Ultra Low NOx Power Vented Models UPN040 40ES 40 42,000 42.6-0.68 66-7/8 20 58-5/8 51-1/2 25 12-1/4 1/2-3/4 170 UPN050 40ES 50 42,000 42.6-0.68 65-7/8 20 57-1/2 51 27 12-1/4 1/2-3/4 207 Notes: ll Ultra Low NOx models certified at 10 ng/j or less. Ultra Low NOx models available in Natural Gas ONLY.. Standard Features Flammable Vapor Ignition Resistant ompliant Electronic ontrol Valve Ultra Low NOx urner Non-F Foam Insulation Glass-Lined Steel Tank Tank Saver node Heat Trap Temperature & Pressure Relief Valve - Factory installed. rass Drain Valve 6- Year Limited Tank & Parts Warranty* See warranty for details. 10-Year Extended Warranty vailable Residential applications only. * 1-year limited tank & parts warranty when installed in a commercial application.

37 Power Vented Residential Gas Models TOP VIEW Model Gal. tu/hr GPH @ 1st Hr. Energy Gas lower Water Ship. Number ap. Input 90 F Rise Rating Factor D E F onn. Diam. onn. Wt. Power Vented Models PVN040 40 40 40,000 45 73 0.70 59 22 42-1/2 49-3/4 14-1/4 N/ 1/2 2, 3 or 4 3/4 174 PVN040 50 40 50,000 56 90 0.70 68-1/2 20 53-1/8 59-1/4 14-1/4 15-1/4 1/2 2, 3 or 4 3/4 176 PVN050 40 50 40,000 45 90 0.70 60-1/4 24 43-3/4 50-3/4 14-1/4 N/ 1/2 2, 3 or 4 3/4 198 PVN050 50 50 50,000 56 96 0.70 68-1/4 22 51-3/4 58-3/4 14-1/4 15-1/4 1/2 2, 3 or 4 3/4 192 PVN050 65ST 50 62,000 70 110 0.70 61-1/4 24 44-1/2 52 14-1/4 15-1/4 1/2 3 or 4 3/4 212 PVN075 75ST 75 72,000 81 155 0.68 70-3/4 26 53 61-1/4 14-1/4 15-1/4 1/2 3 or 4 3/4 277 Notes: Replace N with L to indicate LP gas model For the 50,000 tu models, add ST to the model number for optional Side Tappings. Example, PVN050 50ST *Side Tappings are standard on 62,000 and 72,000 tu models. (Plugs supplied, not installed) Standard Features ENERGY STR Qualified Flammable Vapor Ignition Resistant ompliant Power Vented Exhaust System w/ PV/PV/ or Polypropylene Side Wall or Vertical Venting w/ PV/PV/ or Polypropylene Non-F Foam Insulation Glass-Lined Steel Tank Tank Saver node Electronic Gas ontrol Heat Trap Temperature & Pressure Relief Valve - Factory installed. rass Drain Valve - Factory installed. 6 - Year Limited Tank & Parts Warranty* See warranty for details. 10 -Year Extended Warranty vailable Residential applications only * 1-year limited tank & parts warranty when installed in a commercial application.

38 Power Direct Vent Residential Gas Models 11-1/2" MIN. FROM TOP OF HETER TO ENTER LINE OF FLUE 3" VENT F TOP VIEW 4" D TOP VIEW 1/2" GS ONNETION E Model Gal. tu/hr GPH @ 1st Hr. Energy Gas lower Water Ship. Number ap. Input 90ºF Rise Rating Factor D E F onn. Diam. onn. Wt. Power Direct Vented Models PRN040 40 40 40,000 41 70 0.60 57" 21" 42" 48-1/2" 15" 8" 1/2" 3" 3/4" 224 PRN050 40 50 40,000 41 87 0.59 66" 21" 51" 57-1/2" 15" 8" 1/2" 3" 3/4" 232 PRN050 65 50 65,000 64 105 0.58 69-1/2" 21" 54-1/2" 61" 15" 8" 1/2" 3" 3/4" 232 PRN075 70 75 70,000 72 130 0.58 71-1/2" 26-1/4" 54-3/4" 61-1/2" 15-1/2" 8" 1/2" 3" 3/4" 300 Notes: ll LP heaters are equipped with a cast iron burner. Replace N with L to indicate LP gas model. Standard Features Power Direct Venting System Flammable Vapor Ignition Resistant ompliant Electronic Gas ontrol Non-F Foam Insulation Glass-Lined Steel Tank Heat Trap oncentric Vent Termination (optional) Temperature & Pressure Relief Valve - Factory installed. rass Drain Valve 6-Year Limited Tank & Parts Warranty* See warranty for details. 10-Year Extended Warranty vailable Residential applications only * 1-year limited tank & parts warranty when installed in a commercial application.

39 Residential Electric Models 3/4 3/4 INLET 8" TOP VIEW FRONT VIEW Model Gal. Input 1st Hour Energy Shipping Number ap. Watts Rating Factor Weight Short Models LS030KD 30 4500 41.93 30 22 22-1/2 91 LS040KD 40 4500 38.92 31-1/4 23 24-3/4 113 LS050KD 50 4500 55.91 34 26-1/2 25 164 Medium Models LM030KD 30 4500 43.93 36-1/2 20-1/2 28 90 LM040KD 40 4500 52.92 44 20-1/2 37-3/4 103 LM050KD 50 4500 60.90 48 21-1/2 40-1/2 121 Tall Models LT030KD 30 4500 43.93 46-1/2 18 39-1/2 90 LT040KD 40 4500 52.92 59-1/2 18 53-1/2 106 LT052KD 50 4500 60.91 54 20 47-1/2 116 LT066KD 66 4500 72.88 60-1/4 20-1/2 53 178 LT082KD 80 4500 81.86 60-1/2 22-1/2 52 208 LT120KD 119 4500 112.81 64-1/4 28 54-1/4 336 High Efficiency Models LM050KDEF 50 4500 62.93 49 23 40-1/2 155 LT040KDEF 40 4500 54.93 60 19 53-1/2 120 LT052KDEF 50 4500 60.93 56-1/2 21-1/2 47-1/2 135 LT066KDEF 66 4500 76.92 61 23 53 180 LT082KDEF 80 4500 87.93 61-1/2 25 52 210 Standard Features Non-F Foam Insulation Immersion Type Heating Elements Screw-In Element Mounting djustable Thermostat Glass-lined Steel Tank Tank Saver node Heat Trap Temperature & Pressure Relief Valve - Factory installed. rass Drain Valve 6- Year Limited Tank & Parts Warranty* See warranty for details. 10-Year Extended Warranty vailable Residential applications only * 1-year limited tank & parts warranty when installed in a commercial application. Notes: Standard Voltage and Wattage: 240v 4500w. ELEMENT VILILITY SHEDULE REOVERY RTE (GPH @ F ) Wattage - 120V J - 208V - 240V 40 F 70 F 100 F - 1500 N/ Yes Yes 16 9 6 D - 1650 Yes N/ N/ 17 10 7 E - 2000 Yes Yes Yes 21 12 8 F - 2500 Yes Yes Yes 26 15 10 G - 3000 Yes Yes Yes 31 18 12 H - 3500 N/ Yes Yes 36 21 14 J - 4000 N/ Yes Yes 41 24 17 K - 4500 N/ Yes Yes 47 27 19 P - 6000 N/ Yes Yes 62 35 25 VOLTGE SHEDULE 120V 1ø J 208V 1ø 240V 1ø

40 Junior Electric Models Standard Features djustable Thermostat ontrol Manual Reset High Limit Safety ontrol Glass-lined Steel Tank Temperature & Pressure Relief Valve - Factory installed. Non-F Foam Insulation Heat Trap Tank Saver node 6- Year Limited Tank & Parts Warranty* - See warranty for details. 10-Year Extended Warranty vailable - Residential applications only. * 1-year limited tank & parts warranty when installed in a commercial application. Optional Equipment djustable Water Heater Shelf - Heavy gauge steel shelves as sem ble six different ways for convenient wall mounting. 2.5 gallon model 6-40 gallon models T&P T&P PLUGGED PLUGGED INLET PLUGGED PLUGGED INLET T&P PLUGGED PLUGGED PLUGGED INLET INLET INLET INLET T&P INLET INLET T&P JR 30 & 40 JT 20 JR 20 JR 10 JR 6 Model Gallon Input Standard 1st Hour Energy Shipping Number apacity Watts Voltage Rating Factor Weight JR002S 2.5 1500 120V N/ N/ 13-3/4 13-3/4 11 18 JR006DS 6 1650 120V N/ N/ 15-1/4 14-1/4 10-3/4 31 JR010DS 10 1650 120V N/ N/ 18-1/4 16 12-1/4 45 JR020DS 20 1650 120V N/ N/ 24-3/4 18 18-3/4 65 JT020DS 20 1650 120V N/ N/ 31-3/4 16 25-3/4 62 JR030KS 30 4500 240V 37.93 30 22 22-3/4 100 JR040KS 40 4500 240V 43.92 31-1/4 23 24-3/4 131 Notes: The 2.5 gallon is available in 120 volt / 1500 watts only. Maximum wattage for 6 gallon is 3000 watts. Water connections are 3/4 NPT. Element vailability Schedule Recovery Rate (GPH @ F Rise) Wattage - 120V J - 208V - 240V 40 F 70 F 100 F - 1500 N/ Yes Yes 16 9 6 D - 1650 Yes N/ N/ 17 10 7 E - 2000 Yes Yes Yes 21 12 8 F - 2500 Yes Yes Yes 26 15 10 G - 3000 Yes Yes Yes 31 18 12 H - 3500 N/ Yes Yes 36 21 14 J - 4000 N/ Yes Yes 41 24 17 K - 4500 N/ Yes Yes 47 27 19 P - 6000 N/ Yes Yes 62 35 25 VOLTGE SHEDULE 120V 1ø J 208V 1ø 240V 1ø

41 Manufactured Home Gas Models HOT WTER ONNETION 3/4 NIPPLE SUPPLIED TOP VIEW OLD WTER INLET FOR 50-GLLON MODELS (plugged on 30 and 40-gallon models) OLD WTER INLET ONNETION, 3/4 NIPPLE SUPPLIED (for 30 and 40-gallon models) FRONT Roof Jack Kits Kit Number Min. Max. Ship. Wt. 9002964005-12 10 9002965005 17 32 13 9002966005 32 60 17 9002967005 49 96 22 Model Gal. Input GPH @ 1st Hr. Energy Gas Water Ship. Number ap. tu/hr 90 F Rise Rating Factor D E F onn. onn. Wt Direct Vent Models MDN030 30 30 30,000 31 54 0.61 56 18 57 16-3/4 15-1/4 51-1/2 1/2 3/4 115 MDN040 30 40 32,000 33 64 0.59 56-1/2 20 57-1/2 20-3/4 15-1/4 51 1/2 3/4 134 MDN050 40 50 38,000 39 77 0.58 56 22 57 23-1/4 15-1/4 50-1/2 1/2 3/4 170 tmospheric Vent Models MHN030 35 30 35,500* 36 69 0.61 58 16 59 14-1/4 13-1/4 51-3/4 1/2 3/4 125 MHN040 35 40 35,500* 37 66 0.59 58-1/4 18-1/2 60-1/4 17-3/4 13-1/4 48-1/2 1/2 3/4 134 Notes: * Propane model rated at 32,000 tu/hr Standard Features Flammable Vapor Ignition Resistant ompliant Non-F Foam Insulation Natural Gas to LP Gas onversion Kit djustable Thermostat Glass-Lined Steel Tank Low NOx urner Piezo Ignitor Tank Saver node Heat Trap Temperature & Pressure Relief Valve - Factory installed. rass Drain Valve 6 Year Limited Tank Warranty*, 2 Year Limited Parts Warranty See warranty for details 10 Year Extended Warranty vailable - In residential applications Optional Equipment Roof Jack Kit Manufactured Home water heaters must be installed with one of the approved Roof Jack Kits listed on the table. This kit is ordered separately and must be installed per the installation instructions. Specify roof jack kit size when ordering. ir Inlet Kit n optional ir Inlet kit is available for Direct Vent models installed over open subfloor spaces. The kit allows for horizontal air intake piping up to 30 feet with Schedule 40 PV pipe. Order kit number 9002986005 for 30 and 40 gallon models. Order kit number 9002987005 for 50 gallon models. * 1-year limited tank & parts warranty when installed in a commercial application.

42 Sun Saver Models FROM OLLETOR 1" NIPPLE 30 30 TO PUMP 1" NIPPLE ¾" HOT DOMESTI ¾" OLD DOMESTI INLET 8" TOP VIEW 1¼" T&P VLVE From ollector 1 ½" NPT 4500 WTT ELETRI HETING ELEMENT OVER To Pump 1 ½" NPT D TEMPERTURE SENSOR MOUNTING EHIND LOWER OVER FRONT VIEW Model Gallon Element GPH@ Shipping Number apacity Wattage 90 F Rise D Weight FT066KS 65 4500 21 60-1/4 22 20-1/2 7-1/2 152 FT082KS 80 4500 21 63-1/4 24 35-3/4 5-1/4 204 FT120KS 119 4500 21 63-1/4 28 35-3/4 5-1/4 311 Notes: Voltage and wattage; 240V 1Ø - 4500W. Standard Features Non-F Foam Insulation Glass-Lined Tank Tank Saver node Water onnections Temperature & Pressure Relief Valve (Factory Installed) Tank Sensor Heating Element rass Drain Valve Factory installed. 6- Year Limited Tank & Parts Warranty* See warranty for details. 10-Year Extended Warranty vailable Residential applications only.

43 Stack Frame Pre-ssembled Heavy Duty Factory Welded onstruction Two Lochinvar 990,000 tu/hr opper-fin II models stacked for a total capacity of almost 2 million tu/hr. nother Innovation from Lochinvar Lochinvar s opper-fin technology not only makes our water heaters and boilers more efficient, it means they also have a smaller footprint. So they save space as well as operating costs. nd now there is a way to get greater flexibility and reliability, save even more space, and get a system that is perfectly matched to a facility thanks to the use of a Stack Frame from Lochinvar. Match Load and apacity With this versatile stand, you can stack almost any combination of our opper-fin, opper-fin II, and Efficiency+ water heaters and boilers. So you can achieve the perfect tu/hr capacity for each application. For example, a facility needs a opper-fin II boiler with a total capacity of 1.6 million tu/hr. Instead of installing an oversized HN1802 unit or a smaller HN1442 model, now you can combine two units HN992 and HN652 models to exactly match the facility s needs. Plus, the total footprint of this combined system is just over 10 inches wider than the 652 unit alone, making it smaller than either the 1802 or 1442 model. ll thanks to the Lochinvar Stack Frame. dded System enefits This modular design provides two other important benefits. First, it allows for system turndown for greater efficiency when demand is lower. nd second, it ensures against system failure by utilizing two independent but complementary units. For indoor residential and light commercial needs or commercial applications up to 4 million tu/hr, the Stack Frame gives greater flexibility without a significant increase in stack size or overall system dimensions. Once you have determined a facility s requirements and the exact models needed, utilize the charts provided to calculate total system dimensions. Note: Indoor Installation Only

44 Stack Frame RMOR Water Heaters (Models 151-801) opper-fin Water Heaters RMOR Wall Mount (Models 125-150) MODEL # PRT # * ** Wt. (.lbs) W 151-200 MSF3043 90-1/2 26 26 60 W 286-501 MSF3044 109 26 34 72 W 601-801 MSF30002 109 26 49 94 Note: Heater height is 33-1/4 on W 151-200 models. Heater height is 42-1/2 on W 286-801 models. MODEL # PRT # * ** Wt. (.lbs) W 090 MSF 3034 65-1/2 36 39 73 W 135 MSF 3034 65-1/2 36 39 73 W 180 MSF 3034 65-1/2 36 39 73 W 199 MSF 3035 65-1/2 48 39 84 215 MSF 3035 65-1/2 48 39 84 W 225 MSF 3035 65-1/2 48 39 84 W 270 MSF 3035 65-1/2 48 39 84 W 315 MSF 3035 65-1/2 48 39 84 W 360 MSF 3035 65-1/2 48 39 84 W 399 MSF 3036 65-1/2 65 39 147 W 500 MSF 3036 70-1/2 65 39 147 Note: Heater height is 29-1/2 (45-399) and 34-1/2 (500). PRT # * ** Wt. (.lbs) MSF30018 60-1/4 17-1/2 36 50 Efficiency+ Water Heaters (Models 150-300) opper-fin Water Heaters (Models 497-747) MODEL # PRT # * ** Wt. (.lbs) W 497 MSF3002 81-1/2 51 24-1/2 70 W 647 MSF3003 84-1/2 70 26 128 W 747 MSF3003 84-1/2 70 26 128 Note: Heater Height is 33-1/4 (497-747) PRT # * ** Wt. (.lbs) MSF3021 71-1/4 37 24 72 Note: Heater height is 28 on all models. opper-fin II Water Heaters (Models 987-2067) MODEL # PRT # * ** Wt. (.lbs) F 402 MSF3022 67-1/2 59 24-1/2 83 F 502 MSF3022 67-1/2 59 24-1/2 83 F 652 MSF3023 67-1/2 80 24-1/2 132 F 752 MSF3023 67-1/2 80 24-1/2 132 W/F 987/992 MSF3007 80 68 36 170 W/F 1257/1262 MSF3008 80 88 36 214 W/F 1437/1442 MSF3008 80 88 36 214 W/F 1797/1802 MSF3009 80 114 36 251 W/F 2067/2072 MSF3009 80 114 36 251 Note: Heater height is 31-1/2 (402-752) & 36 (987-2072) * To vent connection ** llow space for plumbing connections

Lochinvar, LL 300 Maddox Simpson Parkway Lebanon, Tennessee 37090 P: 615-889-8900 / F: 615-547-1000 www.lochinvar.com PDP-2.5M-6/14 Printed in U.S..