Edition 1. 20 13
COMPANY INTRODUCTION CLIENTS Over the years, CAM Africa, has attained a large clientele base ranging from major International chain groups to the best known companies within South Africa. We have also recently extended our product range to neighbouring African and Sub Saharan countries and are now officialy a preferred supplier with all the national chain groups. PRODUCTS CAM Africa having made such a remarkable impact in the industry, has expanded the Company products to also include premium new models (just recently launched in Europe) and a distinguished class of sinks, namely, Umano. This product range has been carefully selected to appeal to a more high profile clientele. This line of sinks will without any doubt find its way to dwellings where our sinks are matched with beutifully appointed kitchens. TECHNOLOGY Electronic supply management systems are currently a new concept within the South African building / plumbing industry.by providing high-end supply management technology, CAM will in future be geared to cut down the ordering process from ten day s to a few minutes.for CAM Africa, this technology is the answer to a more streamlined and efficient manner of conducting business. BEST PRACTICE CAM Africa having made such a remarkable impact in the industry, has expanded the Company products to also include premium new models (just recently launched in Europe) and a distinguished class of sinks, namely, Umano. This product range has been carefully selected to appeal to a more high profile clientele. This line of sinks will without any doubt find its way to dwellings where our sinks are matched with beutifully appointed kitchens. INDEX PRODUCT 2013 TABLE OF CONTENT EDITION 1 UD 6248-SEB UD 7848-SEB UD 8050-SEB UD 1050A-DEB UD 1150-DEB UD 1050B-DEB UD 1150B-DEB US 9045-SEB US 1150A-DEB US 1250-DEB US 1850-DCB UP 410 UP 5242 UP 435 UP 480 UP 8050 UWS 101 UWS 103 UWS 104 UWS 107 UWS 109 UB 503 5 6 7 8 9 10 11 13 14 15 16 18 19 20 21 22 24 25 26 27 28 29 605 January Masilela Dr Constantia Park, Pretoria PO Box 32390, 0010 Glenstantia,Pretoria info@umano.co.za Should you want to capture this article, please scan the QR barcode barcode with a smart fone or other compatible device. If you are uncertain how to do this please refer to your devise software manual. 05 INSET drop in 13 18 24 LAY ON BASIN OTHER sit on utility items
INSET SINKS DROP IN 4 5 UD 6248-SEB INSET SINK 0.6mm Dimensions: 620(L) x 480(W) x 175(D) Bowl: 363(L) x 410(W) x 175(D) Waste type: waste strainer Barcode: 610 696 070 746 The kitchen surface is cut too nearly the same size as the sink. The sink is then placed into this cavity, therefore Drop In. The sink is fixed to the surface with inset clips and lies flush to the surface level. In addition, the sink is sealed with waterproof silicone.
UD 7848-SEB INSET SINK 6 7 UD 8050-SEB INSET SINK Dimensions: 780(L) x 480(W) x 180(D) Bowl: 380(L) x 380(W) x 180(D) Waste type: waste strainer Barcode: 610 696 070 753 0.6mm 0.6mm Dimensions: 800(L) x 500(W) x 210(D) Bowl: 363(L) x 410(W) x 210(D) Waste type: waste strainer Barcode: 610 696 070 890
UD 1050A-DEB INSET SINK 8 9 UD 1150A-DEB INSET SINK Dimensions: 1000(L) x 500(W) x 175(D) Bowl: 365(L) x 410(W) x 175(D) Waste type: waste strainer Barcode: 610 696 070 760 0.6mm Dimensions: 1160(L) x 500(W) x 210(D) Bowl: 350(L) x 410(W) x 210(D) Waste type: waste strainer Barcode: 610 696 070 845
UD 1050B-DEB INSET SINK 10 11 UD 1150B-DEB DROP IN SINK Dimensions: 1000(L) x 500(W) x 210(D) Bowl: 350(L) x 400(W) x 210(D) Waste type: waste strainer Barcode: 610 696 070 852 Dimensions: 1160(L) x 500(W) x 210(D) Bowl: 340(L) x 370(W) x 210(D) Waste type: waste strainer Barcode: 610 696 070 784
LAY-ON SINKS SIT ON 12 13 US 9045-SEB LAY-ON SINK 201 0.5mm Dimensions: 900(L) x 450(W) x 160(D) Bowl: 340(L) x 370(W) x 210(D) Waste type: waste strainer Barcode: 610 696 070 814 The kitchen surface is cut too the dimensions of the bowl only. A sit On sink has a side edge of 3cm, which sits on top of the working surface, there for Sit On. The sink is fixed to the surface with silicone and lies higher than the surface level.
US 1150A-DEB LAY-ON SINK 14 15 US 1250-DEB LAY-ON SINK Dimensions: 1160(L) x 500(W) x 210(D) Bowl: 340(L) x 370(W) x 210(D) Waste type: waste strainer Barcode: 610 696 070 784 201 0.5mm Dimensions: 1200(L) x 500(W) x 200(D) Bowl: 340(L) x 370(W) x 200(D) Waste type: waste strainer Barcode: 610 696 070 821
US 1850-DCB LAY-ON SINK 16 17 BASINS PREP BOWLS Dimensions: 1800(L) x 500(W) x 200(D) Bowl: 350(L) x 400(W) x 200(D) Waste type: waste strainer Barcode: 610 696 070 838 0.6mm Prep bowl are used in more upmarket houses. The kitchen surface is cut too nearly the same size as the bowl. The bowl is then placed into this cavity. The bowl is fixed to the surface with silicone and lies flush on the surface level. it can be used on its own in pubs or very small kitchenettes.
UP 410 UNDERMOUNT BASIN UP 5242 18 19 UNDERMOUNT BASIN Dimensions: 410(L) x 410(W) x 180(D) Bowl: 380(L) x 380(W) x 180(D) Waste type: waste strainer Barcode: 610 696 070 791 Dimensions: 520(L) x 420(W) x 180(D) Bowl: 480(L) x 380(W) x 180(D) Waste type: waste strainer Barcode: 610 696 070 807
UP 435 PREP BOWL 20 21 UP 480 PREP BOWL Dimensions: 435(L) x 435(W) x 185(D) Bowl: 375(L) x 375(W) x 185(D) Waste type: waste strainer Barcode: 610 696 070 883 Dimensions: 480(L) x 480(W) x 185(D) Bowl: 375(L) x 375(W) x 185(D) Waste type: waste strainer Barcode: 610 696 070 739
UP 8050 BASIN 22 23 ACCESORIES ACCESSORY Dimensions: 800(L) x 500(W) x 200(D) Bowl: 715(L) x 415(W) x 200(D) Waste type: waste strainer Barcode: 610 696 070 876 Once the sink is successfully installed, a water draining system must be implemented. Umano offers complete solutions sold at a slight additional cost that would fit a standard 40mm or waste. Available for single and double bowl sinks. These draining systems incorporate an overflow.
UWS 101 ACCESSORY 24 25 UWS 103 ACCESSORY PVC WASTE FITTING Waste type: waste strainer Barcode: 610 696 070 913 WASTE FITTINGS NOT INCLUDED waste gauge material PVC waste gauge material PVC PVC WASTE FITTING Waste type: waste strainer Barcode: 610 696 070 920 WASTE FITTINGS NOT INCLUDED
UWS 104 ACCESSORY 26 27 UWS 107 ACCESSORY PVC WASTE FITTING Waste type: waste strainer Barcode: 610 696 070 937 WASTE FITTINGS NOT INCLUDED waste gauge material PVC waste gauge material PVC PVC WASTE FITTING Waste type: waste strainer Barcode: 610 696 070 944 WASTE FITTINGS NOT INCLUDED
UWS 109 ACCESSORY 28 29 UB5 03 ACCESSORY PVC WASTE FITTING Waste type: waste strainer Barcode: 610 696 070 951 WASTE FITTINGS NOT INCLUDED waste gauge material PVC waste gauge material PVC PVC WASTE FITTING Dimensions: 350(L) x 300(W) x 100(D) Barcode: 610 696 070 968
STAINLESS STEEL CARE AND MAINTENACE STAINLESS STEEL SPECIFICATIONS ICA Barcode ICA Barcode NOXI CRÈME is a unique formulation designed to clean, protect and shine stainless steel, restoring steel to its original luster. Protects against rust and corrosion, makes stainless steel really stainless. Should you want to capture this article, please scan the QR barcode barcode with a smart fone or other compatible device. If you are uncertain how to do this please refer to your devise software manual. Figure 1 1 2 3 When the stainless steel becomes noticeably dull or dirty you can clean it by using the simplest cleaning procedure. Clean the surface using either a mild detergent solution or just warm water. Apply with a soft cloth or sponge, rinse well and wipe the stainless steel dry. Regular and inexpensive cleaning will retain both the corrosion resistance and appearance of the stainless steel over the years. A small amount of Noxi Crème (Figure 1) may occasionally be used, applied with a soft cloth, wetted with this detergent solution to remove stubborn dirt or slight incipient stains. Product Care Only use brand cleaners stating: Safe for use on stainless steel. Regularly clean the surface. Always rinse and dry after do s dont s Product Damage Never use metallic brushes with metal bristles or harsh abrasive powders. Never clean the surface with force. Never use acids or Silver All Umano stainless steel kitchen sinks are manufactured from austenitic stainless steel, with a Chrome-nickel-iron alloy of 16-22% chromium (Cr), 6-22% nickel (Ni), and low carbon non- magnetic properties, when annealed. Chromium provides the steel with a protective layer, by binding with the surrounding oxygen and forming a chromium (III) oxide. In such a molecule, there will be three oxygen atoms bound to two chromium atoms. This layer will be very difficult to penetrate for the remaining oxygen in the air or even water in wet conditions. If the chromium oxide layer is dented or scratched, it will rapidly reform and continue to protect the steel. In addition, nickel is added to austenite the iron in order to stabilize its molecular structure when added in significant amounts as in the case of grade 202 stainless steel. 202 430 C Si Mn P S Cr Ni 0.15 1.00 7.5-10 0.060 0.030 16-19 4-6 0.08 0.08 0.75 2 0.045 0.030 18-20 8-10.5 Rockwell Hardness 100 92 88 use. Cleaners. Research has proven that certain household products damage the sink base when stored underneath. The ingredient to look out for is chloride found in: Most sinks in our range are manufactured from stainless steel with a gauge of 0.8 up to 0.9mm, depending on the specific model. Some contractor models may be reduced to 0.55mm or 0.60mm depending on the raw material used. a) Chloride for swimming pools d) Tile cleaners with mildew treatment b) Bathroom cleaning products e) Household bleach c) Kitchen cleaning products (liquid cleaners, dishwasher powders laundry detergents,
CAM AFRICA SOUTH AFRICA Official distributor in Africa for the Umano product ranges. SA National Hotline: 0860 CAM AFRI or 0860 226 2374 sales@umano.co.za www.umano.it Tell: (+27) 12 993 3910 Fax: (+27) 12 993 3337 605 January Masellela Dr Constantia Park, Pretoria PO Box 32390, 0010 Glenstantia,Pretoria