Packaged utility rooms.

Packaged utility rooms.

Key features. The packaged utility room from Dutypoint allows developers to reduce costs, designers to save floor space and contractors to save time on site. EXTRACTION DUCT FULLY INTEGRATED HEAT INTERFACE UNIT LED LIGHTING ELECTRICAL DISTRIBUTION BOARD INTEGRATED MVHR COLD WATER ISOLATION VALVE THERMOSTAT AND APARTMENT LIGHTING CONTROLS SPACE FOR UNDERFLOOR HEATING MANIFOLD ACCESS HATCH DATA SERVICES WASHING MACHINE CONNECTIONS 2 01452 300110 SALES@DUTYPOINT.COM

Specification. A lightweight, precision-manufactured steel frame provides the foundation for the packaged utility room. The frame is fitted with all the necessary electrical and mechanical components and powder coated in a choice of colours prior to delivery. The room is even fitted with a worktop in a choice of finishes. The room can satisfy the requirements of the developer, the architect, M&E consultant, M&E contractor and the eventual occupier in a residential project where space is at a premium and a high specification is required. The units are shipped to site from our UK factory fully assembled, ready for immediate offload and installation on site. Mechanical features. STANDARD MECHANICAL FEATURES WRAS approved heat interface unit with configurable heating and domestic hot water load ratings according to project requirements, concealed by access door, with a window for viewing the heat meter Digital heat meter with viewing panel, remote data logging systems can also be selected Heating controls including wireless thermostat Cold water inlet valve with stopcock Plumbing for washing machine, including supply with shut-off valve and drainage connections 102mm cut out for extractor vent Intergrated Mechanical Ventilation and Heat Recovery unit (MVHR) Electrical features. STANDARD ELECTRICAL FEATURES Electrical consumer unit with up to 36 grid switches LED lighting with motion sensor Electrical socket for washing machine Electrical sockets for additional equipment OPTIONS Room thermostat and heating system timer Connections for other equipment as required Interface with alarm systems Aesthetics. AESTHETIC OPTIONS Powder coated finish in a wide choice of colours Worktop selected from a range of finishes LED strip lighting PACKAGED UTILITY ROOM OPTIONS Water meter Remote data logging and billing system 3

Models and selection. Selection of a packaged utility room is a detailed process which must take the following into account: The desired layout of the building and individual dwelling there will likely be more than one layout The power required from the heat interface unit, both from the heating and domestic hot water The additional features required, such as whether a washing machine connection is required The MVHR unit required USE THE GUIDE BELOW TO DETERMINE THE MODELS YOU REQUIRE, THEN CONTACT OUR SALES TEAM FOR A QUOTATION. T: +44(0)1452 300592 E: sales@dutypoint.com Model selector HPUC 15 50 L R U D - 02 HIU heating nominal kw load 15 15 kw 20 20 kw 25 25 kw HIU DHW nominal kw load 50 50 kw 60 60 kw 75 75 kw HIU position L Left R Right Soil stock position L Left R Right Heating type U Underfloor R Radiators Appliance preparation N No appliance W Plumbing for washing machine D Plumbing for washer dryer MVHR model 02 ECO2 03 ECO3 04 ECO4 4 01452 300110 300592 SALES@DUTYPOINT.COM

Standard unit dimensions. PACKAGED UTILITY ROOM Bespoke packaged utility rooms. Although a standard range of configurations is available, our in-house design team can use the latest CAD technology to design a solution which is specific to your project. This can then be presented to you as a beautiful rendered model, so all stakeholders in the project can visualise the finished product prior to approval. Our project managers will work closely with the relevant contractors to ensure that the delivery schedule is aligned with the project requirements, delivering in batches and providing storage where required. 5

Case study - Teddington Riverside. PROJECT SUMMARY Dutypoint were challenged by mechanical and electrical contractors to design a creative solution to house all of the modern day household utilities within a very limited space for their upcoming Teddington Riverside project. The finished development will comprise of 217 luxury apartments, a mix of 1, 2 and 3 bedrooms with 258 secure underground car parking spaces, plus six 4 bedroom family houses. PROJECT CHALLENGE The design brief for the utility room consisted of a single prefabricated, sleek, all-in-one, modular utility room with an option to have a configurable layout that could be delivered to site towards the final stages of the construction process. Further to this, the room needed to have space for a standard sized washing machine or tumble dryer, a heat interface unit, MVHR and consumer unit with an electrical control panel which can manage the circuitry for the residence. PROJECT NAME Teddington Riverside INDUSTRY SECTOR Luxury Residential PROJECT TYPE Utility room CLIENT Hamilton s Architects MAIN CONTRACTOR Midgard Ltd PRODUCT SUPPLIED Packaged utility room with integrated HIU PROJECT SOLUTION After working collaboratively with the M&E contractors and architects, our engineering design team were able to create a concept version of the desired unit which was not only aesthetically pleasing, but also functional for the end user. A prototype was later constructed at the Dutypoint factory and successfully installed on site in-line with the project build schedule. 6 01452 300110 SALES@DUTYPOINT.COM

7

Contact us. Head Office Dutypoint Ltd Olympus Park Quedgeley GL2 4DH United Kingdom London Office Dutypoint Ltd 66 Turnmill Street London EC1M 5RR United Kingdom T: +44 (0)1452 300110 T: +44 (0)1452 300110 E: info@dutypoint.com