Monthly Notifications Register

Information procedure Page 1 Monthly Notifications Register Notifications registered at CMC from 2009-11-01 to 2009-11-30 Register issued on : 2009-12-03

List of non-electrotechnical subsectors 2009-11 Sector A: Services Subsector Title ISO/TC CEN/TC reference reference A01 Tourist services / 329; CEN/WS ETO A02 Cleaning services / 328 A03 Postal services / 331 A04 Transportation services / 320; CEN/WS 016 A05 Maintenance services / 319 A06 Building and construction services / 330 A07 Translation services / A08 Funeral services / CEN/BT/TF 139 A09 Facility management / 348 A10 Services of Real Estate Agents / CEN/BT/TF 180, A11 Security Services / CEN/BT/TF 167; 373 391; 384; 370; CEN/WS 044 A12 Consultancy Services / 395; 381 A99 Undetermined / CEN/WS 002; CEN/WS 004 CEN/WS 037 CEN/WS 039 CEN/WS 041 CEN/WS 051, 375; 374; 385

Sector B: Building and construction Subsector Title ISO/TC CEN/TC reference reference B01 Fire protection 21 70; 72; 191; 192 B02 Structures 59; 98 166; 167; 250; 277; 346 284; 288; 297; 340; 349 B03 Concrete 71 104; CEN/WS 003; CEN/WS 009 B04 Cement 74; 77 51 B05 Fire tests 92 127 B06 Gypsum / 241 B07 Glass 160 129 B08 Doors and windows 162 33 B09 Thermal matters 163 88; 89; 371 B10 Timber structures 165 124 B11 Metal structures 167 135 CEN/BT WG 173 CEN/WS 036 B12 Masonry 179; 196 125; 246 B13 Solar energy 180 312 B14 Geotechnics 182 341; 396 B15 Sanitary appliances / 163; 7 B16 Taps / / B17 Lighting equipment and lighting / 50; 169 application technology B18 Scaffolding / 53 B19 Ceramic tiles 189 67 B20 Drainage equipment / 165 B21 Baths / / B22 Wallcoverings / 99 B23 District heating / 107 B24 Auxiliary and handicraft work / / B25 Gas distribution installation and / 234; 235; 282 related equipment B26 Road building and maintenance / 178; 227 B27 Waterproofing materials / 128; 254; 361; 314 B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154 B30 Floor and surfacing / 217; 303; 323; 390 B31 Heating systems in buildings / 228; 247 B32 Precast concrete products / 177; B33 Building design 205 315; 325; 388 B34 Building and construction Environmental aspect 350; 351 B99 Undetermined /

Sector C: Chemicals, chemical engineering and food products Subsector Title ISO/TC CEN/TC reference reference C01 Food products 34 174; 275; 302; 360 307; 327; 338; 387 CEN/WS 008 CEN/WS 018 C02 Paints and related products 35 139; 298; 173 C03 Chemistry 47 317; 363 C04 Laboratory glassware 48 332 C05 Lac / / C06 Essential oils 54 / C08 Pesticides 81 / C09 Surfactants 91 276 C10 Starch 93 / C11 Tobacco 126 / C12 Glass plant / / C13 Fertilizers 134 223; 260 C16 Wood preservatives / / C17 Trees and plants / / C18 Adhesives / 193 C19 Chemical analysis 201; 202 382; 347 C20 Explosives and firework / 212; 321 C21 Cosmetics 217 392 C99 Undetermined / 386

Sector F: Fundamental standards Subsector Title ISO/TC CEN/TC reference reference F01 Technical drawings 10 / F02 Units & symbols 12 / F03 Preferred numbers 19 / F04 Sieves 24 / F05 Measuring instruments 30; 113 92; 171; 176; 237; F06 Terminology principles 37 / 294; 318; 244; 367 141; CEN/WS 011 F07 Documentation and information 46 304; CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368 F08 Surfaces / 290 F09 Banking 68 / F10 Statistics 69 / F12 Information processing systems 204 224; 225; 251; 278; CEN/WS EBES CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 365; 287 F13 Environmental tests / / F14 Graphical technology, 130 / sign-boards and nameplates F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033 F16 Graphical symbols 145 / F17 Administrative documents 154 CEN/WS MMU F18 Micrographics 171 / F19 Optics 172; 187 123; 170 F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC CWG/QS CEN/WS 030 362 F21 Value analysis and project / 279 network F22 Logistics / 379; 273 F23 Energy 203 CEN/WS 027 F99 Undetermined / 389

Sector H: Products for household and leisure use Subsector Title ISO/TC CEN/TC reference reference H01 Cinematography 36 372 H02 Photography 42 / H03 Consumer questions / 291 H04 Sports equipment 83 136 H05 Oil and gas burners / 47; 131 H06 Horology 114 / H07 Space heating 116 62; 110; 130; 179; 180 H08 Sizing systems 133; 137 / H09 Furniture 136 207 H10 Sewing machines 148 / H11 Heater controls 161 58 H12 Ceramic and glass-ware for food 166 / H13 Jewellery 174 / H14 Caravans 177 245 H15 Toys 181 52 H17 Oil stoves / 46 H18 Central heating boilers / 48; 57; 109; 269 H19 Non-electric cookers and barbecues / 49; 281; 295 H22 Smokers lighters and matches / 355; 87 H23 Ladders / 93 H24 Tactile danger warnings / / H25 Large gas appliances / CEN/CLC/JWG FCGA H26 Sealing materials / 108; 208 H27 Educational equipment / / H28 Hunting 191 / H29 Heat pumps / 113 H30 Equipment for children / 252 H31 Dedicated LPG appliances / 181 H32 Culinary utensils 186 194 H33 Footwear (excluding protective / 309 footwear) H34 Child safety / CEN/BT/WG 117 398 H99 Undetermined / 299; 364; 369

Sector I: Mechanical engineering Subsector Title ISO/TC CEN/TC reference reference I01 Screw threads 1 / I02 Fasteners 2 185 I03 Limits & fits / / I04 Rolling bearings 4 / I05 Iron pipes 5 203 I06 Pressure vessels 11 54 I07 Shafts 14 / I08 Agricultural machines 23 144, 334 I09 Small tools 29 213 I10 Splines / / I11 Machine tools 39 142; 143; 145; 255 I12 Pulleys & belts 41 188 I13 Gas containers 58 23; 286 I14 Gears 60 / I15 Equipment for petroleum industry 67 12 I16 Internal combustion engines 70; 192 270 I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 153 I18 Mining 82 196 I19 Nuclear energy 85 / I20 Refrigeration 86 44; 182 I21 Chains and chain wheels 100 / I22 Vacuum technology 112 / I23 Pumps 115 197 I24 Industrial fans 117 356 I25 Compressors 118 232 I26 Plain bearings 123 / I27 Earth moving and construction 127; 195 151 equipment I28 Fluid power 131 / I29 Gas cleaning / 195 I30 Air distribution / 156 I31 Valves 153; 185 69; 236; 105 I32 Flanges / 74

I33 Information processing in 184 310 automation I34 Non-ferrous metallic pipes / / I35 Leisure and recreational machines / 152 I36 Thermoprocessing technology / 186 I37 Printing and paper machines / 198 I38 Leather production, tannery and / 200; 201 related machinery I39 Machines for metal processing / 202; 322 I40 Industrial piping networks / 267 I41 Membrane filters / 272 I42 Potentially explosive atmospheres / 305 I43 Hydrogen energy 197 / I44 Nanotechnologies 229 352 I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2 65, 157

Sector M: Metallic materials Subsector Title ISO/TC CEN/TC reference reference M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 M02 Zinc / 209 M03 Foundry technology, 25 190; ECISS/TC 31 including cast iron M04 Copper 26 133 M05 Welding 44 121 M06 Dimensions of wrought products / / M07 Manganese and chromium 65 / M08 Light alloys 79 132 M09 Iron ores 102 / M10 Metallic coatings 107 240 M11 Powder metallurgy 119 / M12 Aluminium ores 129 / M13 Ferroalloys 132 / M14 Nickel 155 / M15 Metallic corrosion 156 262; 219 M16 Mechanical tests for metals 164 ECISS/TC 1; ECISS/TC 2 M17 Heavy metal ores 183 / M18 Metal wire products / ECISS/TC 30 CEN/BT/TF 196 378

M20 Tin and tin alloys / 220 M21 Precious metals / 283 M22 Lead and lead alloys / 306 M99 Undetermined / /

Sector N: Non-metallic materials Subsector Title ISO/TC CEN/TC reference reference N01 Paper and board 6 172 N02 Solid fuels 27 335; 343;383 CEN/WS 019 N03 Petroleum products 28 19; 336; 343 CEN/WS 038 N04 Refractories 33 187 N05 Textiles 38 189; 248 N06 Rubber 45 218; 366 CEN/WS 003 N07 Sawn timber 55 38; 175 N08 Mica / / N09 Plastics / 249 N10 Cork 87 / N11 Wood-based panels 89 112 N12 Timber products 99 / N13 Leather 120 289 N14 Plastics pipes 138 155 N17 Fluorspar 175 / N18 Glass-fibre reinforced plastics / / N19 Tapes / 253 N20 Ceramics 206 184 N21 Gaseous fuels and combustible gas 158; 193 238 N22 Feather and related materials / 222 N99 Undetermined / /

Sector S: Health, environment and medical equipment Subsector Title ISO/TC CEN/TC reference reference S01 Acoustics and sound 43 126; 211 insulation S02 Transfusion equipment 76 / S03 Syringes 84 / S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162 CEN/WS 026 S05 Dentistry 106 55 S06 Vibration & shock 108 231 S07 Anaesthetic and respiratory 121 215 equipment S08 Air quality 146 137; 243; 264; CEN/CLC WG/CMI S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034 S10 Surgical implants 150 285; CEN/CLC JWG/AIMD S11 Contraceptives 157 / S12 Gas analysis / / S13 Ergonomics 159 122 S14 Prosthetics 168 / S15 Surgical instruments 170 / S16 Aids for the disabled 173 293 S17 Respiratory protective devices / 79 S18 Sterilization of equipment 198 102; 204 S19 First aid equipment and rescue systems / 239 S20 Waste collection, handling and / 183 transportation S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316 CEN/CLC/TC 3 CEN/WS 031 S22 Energy saving / CEN/WS 005 CEN/WS 015 S23 Personal & property protection against aggression/burglary protection / 263 S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics S26 Environmental management 207 CEN/WS 040 S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120 S28 Demining / CEN/WS 029 CEN/WS 013 S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 380; 358; 359 CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging Subsector Title ISO/TC CEN/TC reference reference T01 Shipbuilding and maritime 8; 188 15; 300 structures T02 Aerospace 20 274; AECMA; ECSS 377 T03 Road vehicles 22 301; 326 CEN/WS IMA T04 Tyres 31 / T05 Pallets 51 / T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393 T07 Glass containers 63 / T08 Cranes 96 147 T09 Materials handling and 101 148; 149 storage equipment T10 Freight containers 104 119; 280 T11 Steel wire ropes 105 / T12 Industrial trucks 110 150 T13 Lifting chains, hooks and ropes 111 168 T14 Packaging 122 261; 120 T15 Cycles 149 333 T16 Lifts & escalators 178 10; 242 T17 Builders hoists / / T18 Elevating platforms / 98 T19 Road safety / 226; 339 T20 Tram- and railway engineering / 256; / CEN/CLC WG/FPR T21 Packaging machines / 146 T22 Off-road vehicles / 354 T99 Undetermined / CEN/WS TAF

Sector Z: Information technology Subsector Title ISO/TC CEN/TC Z01 Radiocommunication for IT / / Z02 Telephony, telegraphy for IT / CEN/CENELEC - ETSI Z03 Common O.S.I. activities / CEN/CENELEC - EWOS Z99 Undetermined / CEN/CENELEC CEN/WS DFA CEN/WS DIR CEN/WS EBES CEN/WS ECH CEN/WS ECO CEN/ES EFI CEN/WS ESI CEN/WS FAS CEN/WS FUN CEN/WS IEC CEN/WS JXF CEN/WS LCT CEN/WS LTS CEN/WS MDC CEN/WS MET CEN/WS POR CEN/WS URI CEN/WS XFS CEN/TC 353 CEN/WS ORC CEN/WS CTC CEN/WS XML CEN/WS MEE CEN/WS SCE CEN/WS MES CEN/WS UDP CEN/WS MMI CEN/WS FS2 CEN/WS AUT CEN/WS ICT CEN/WS KMA CEN/WS TEX CEN/WS SAN CEN/WS DPP CEN/WS HIC CEN/WS MLX CEN/WS ego CEN/WS BII

Information procedure Page 2 Monthly Notifications Register Notifications registered at CMC from 2009-11-01 to 2009-11-30 Sector A : SERVICES Register issued on : 2009-12-03

Subsector A03: POSTAL SERVICES Page 3 Subsector : A03 Registration Date : 2009-11-05 AFNOR France Project ID : FA165896/0001 Project Established PR NF D27-408/A1 Letter boxes with reduced capacity and with large opening for outdoor installation - Requirements and testing REV/AMD NF D27-408:200312 (D27-408) Subsector : A03 Registration Date : 2009-11-05 AFNOR France Project ID : FA165897/0001 Project Established PR NF D27-407/A1 Letter boxes with reduced capacity and with large opening for indoor installation - Requirements and testing REV/AMD NF D27-407:200408 (D27-407) Subsector A06: BUILDING AND CONSTRUCTION SERVICES Subsector : A06 Registration Date : 2009-11-19 DIN Germany Project ID : 00515106/0001 Project Established 00515106 Structural bearings - Guide bearings with sliding surfaces steel to steel - Part 13: Design and manufacture Subsector A99: UNDETERMINED. Subsector : A99 Registration Date : 2009-11-13 ASI Austria Project ID : 00022735/0001 Project Established ÖNORM S 2500 Social Responsibility of organisations (CSR) This document provides to all types of organisations, regardless of their size, willing to act in a socially responsible way a framework with minimum expectations for the planning, implementation, quality assurance and continuous improvement of their social

Page 4 responsibility. Social responsibility is the responsibility of an organization for the impacts of its decisions and activities on society and the environment, through transparent and ethical behaviour that contributes to sustainable development, including health and the welfare of society, takes into account the expectations of stakeholders, is in compliance with applicable law and consistent with international norms of behaviour and is integrated throughout the organization and practiced in its relationships. Subsector : A99 Registration Date : 2009-11-02 BSI United Kingdom Project ID : 00903594/0001 Project Established BS XXXX Collaborative business relationships. A framework specification ** End of Sector **

Information procedure Page 5 Monthly Notifications Register Notifications registered at CMC from 2009-11-01 to 2009-11-30 Sector B : BUILDING AND CONSTRUCTION Register issued on : 2009-12-03

Subsector B01: FIRE PROTECTION. Page 6 Subsector : B01 Registration Date : 2009-11-13 ASI Austria Project ID : 00022717/0001 Project Established ÖNORM H 6025 Ventilation and airconditioning plants - Fire dampers - Requirements, test specifications, marking of conformity This ÖNORM contains requirements for fire prevention flaps as well as rules for the testing and the standard marking of these flaps and is to be be applied only to those flaps which shall prevent the spread of fire and smoke by air pipes in ventilation systems. Fire prevention endings on an intumescending basis with or without movable locking elements are not subjet of this ÖNORM. Subsector : B01 Registration Date : 2009-11-19 DIN Germany Project ID : 03100693/0001 Project Established 03100693 Firefighting vehicles - Part 5: Group pumping appliance LF 10/10 Subsector : B01 Registration Date : 2009-11-19 DIN Germany Project ID : 03100694/0001 Project Established 03100694 Firefighting vehicles - Part 11: Group pumping appliance LF 20/16 Subsector : B01 Registration Date : 2009-11-19 DIN Germany Project ID : 03100695/0001 Project Established 03100695 Firefighting vehicles - Part 26: Group pumping appliance for rescue operations HLF 10/10

Subsector : B01 Registration Date : 2009-11-19 DIN Germany Project ID : 03100696/0001 Project Established 03100696 Firefighting vehicles - Part 27: Group pumping appliance for rescue operations HLF 20/16 Page 7 Subsector : B01 Registration Date : 2009-11-19 DIN Germany Project ID : 03100710/0001 Project Established 03100710 Portable searchlight with mounting equipment for vehicles, explosionproof Subsector : B01 Registration Date : 2009-11-19 DIN Germany Project ID : 03100711/0001 Project Established 03100711 Multi purpose bag for fire service use Subsector : B01 Registration Date : 2009-11-04 NEN Netherlands Project ID : 50001525/0001 Project Established 13.220.01 NEN 8020-41:2009 Ontw. nl (Fire) safety tents This norm gives requirements for tents concerning positioning of the tent, the use of materials, equipment and safe escape. Subsector B02: STRUCTURES. Subsector : B02 Registration Date : 2009-11-11 LVS Draft Issue Date : 2009-11-26

Latvia Latest Date for Comments : 2009-12-17 Project ID : 00300001/0001 Draft for public enquiry 91.010.30 LVS EN 1996-3:2006/prNA Eurocode 6: Design of masonry structures Part 3: Simplified calculation methods for unreinforced masonry structures The standard specifies national parameters to LVS EN 1996-3 and shall be applied jointly with LVS EN 1996-3 in Latvia REV/AMD LVS EN 1996-3(2006) Page 8 Subsector : B02 Registration Date : 2009-11-11 LVS Draft Issue Date : 2009-11-26 Latvia Latest Date for Comments : 2009-12-17 Project ID : 00300002/0001 Draft for public enquiry 91.010.30 LVS EN 1996-2:2006/prNA Eurocode 6: Design of masonry structures Part 2: Design considerations, selection of materials and execution of masonry The standard specifies national parameters to LVS EN 1996-2 and shall be applied jointly with LVS EN 1996-2 in Latvia REV/AMD LVS EN 1996-2(2006) Subsector : B02 Registration Date : 2009-11-11 LVS Draft Issue Date : 2009-11-26 Latvia Latest Date for Comments : 2009-12-17 Project ID : 00300003/0001 Draft for public enquiry 91.010.30 LVS EN 1996-1-2:2007/prNA Eurocode 6: Design of masonry structures Part 1-2: General rules Structural fire design - National annex The standard specifies national parameters to LVS EN 1996-1-2 and shall be applied jointly with LVS EN 1996-1-2 in Latvia REV/AMD LVS EN 1996-1-2(2007) Subsector : B02 Registration Date : 2009-11-11 LVS Draft Issue Date : 2009-11-26 Latvia Latest Date for Comments : 2009-12-17 Project ID : 00300004/0001 Draft for public enquiry 91.010.30 LVS EN 1996-1-1:2008/prNA Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures - National annex The standard specifies national parameters to LVS EN 1996-1-1 and shall be applied jointly with LVS EN 1996-1-1 in Latvia REV/AMD LVS EN 1996-1-1(2008)

Subsector : B02 Registration Date : 2009-11-11 LVS Draft Issue Date : 2009-11-26 Latvia Latest Date for Comments : 2009-12-17 Project ID : 00300005/0001 Draft for public enquiry 91.010.30 LVS EN 1995-1-1:2005/prNA Eurocode 5 - Design of timber structures - Part 1-1: General - Common rules and rules for buildings National annex The standard specifies national parameters to LVS EN 1995-1-1 and shall be applied jointly with LVS EN 1995-1-1 in Latvia REV/AMD LVS EN 1995-1-1(2005) Page 9 Subsector : B02 Registration Date : 2009-11-11 LVS Draft Issue Date : 2009-11-26 Latvia Latest Date for Comments : 2009-12-17 Project ID : 00300006/0001 Draft for public enquiry 91.010.30 LVS EN 1995-1-2:2007pr/NA Eurocode 5 - Design of timber structures - Part 1-2: General - Structural fire design National annex The standard specifies national parameters to LVS EN 1995-1-2 and shall be applied jointly with LVS EN 1995-1-2 in Latvia REV/AMD LVS EN 1995-1-2 (2007) Subsector : B02 Registration Date : 2009-11-11 LVS Draft Issue Date : 2009-11-26 Latvia Latest Date for Comments : 2009-12-17 Project ID : 00300007/0001 Draft for public enquiry 91.010.30 LVS EN 1991-1-3:2003/prNA Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads. National annex The standard specifies national parameters to LVS EN 1991-1-3 and shall be applied jointly with LVS EN 1991-1-3 in Latvia REV/AMD LVS EN 1991-1-3(2003) Subsector : B02 Registration Date : 2009-11-11 LVS Draft Issue Date : 2009-11-26 Latvia Latest Date for Comments : 2009-12-17 Project ID : 00300008/0001 Draft for public enquiry 91.010.30 LVS EN 1991-1-1:2003/prNA Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight and imposed loads for buildings - National annex The standard specifies national parameters to LVS EN 1991-1-1 and shall be applied jointly with LVS EN 1991-1-1 in Latvia

Page 10 REV/AMD LVS EN 1991-1-1(2003) Subsector : B02 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2009-11-30 Czech Republic Latest Date for Comments : 2010-12-31 Project ID : 73006109/0001 Draft for public enquiry Design of structures of stone The aim of the revision is up-dating of the standard in the connection with the implementation of European Standards into ČSN and according to the contemporary state of art. REV/AMD CSN 73 3251 (1986) Subsector : B02 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2009-11-30 Czech Republic Latest Date for Comments : 2010-12-31 Project ID : 73008409/0001 Draft for public enquiry Eurocode: Basis of structural design The aim of the national amendment consists in adding the supplementary information from withdrawn conflicting national standards. REV/AMD Amendment Z1 of CSN EN 1990 (2004) Subsector : B02 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2009-11-30 Czech Republic Latest Date for Comments : 2010-12-31 Project ID : 73008509/0001 Draft for public enquiry Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings The aim of the national amendment consists in adding the supplementary information from withdrawn conflicting national standards. REV/AMD Amendment Z1 of CSN EN 1991-1-1 (2004) Subsector : B02 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2009-11-30 Czech Republic Latest Date for Comments : 2010-12-31 Project ID : 73008609/0001 Draft for public enquiry Eurocode 1: Actions on structures - Part 1-3: General actions - Snow loads The aim of the national amendment consists in

Page 11 adding the supplementary information from withdrawn conflicting national standards. REV/AMD Amendment Z2 of CSN EN 1991-1-3 (2005) Subsector : B02 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2009-11-30 Czech Republic Latest Date for Comments : 2010-12-31 Project ID : 73008709/0001 Draft for public enquiry Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal Actions The aim of the national amendment consists in adding the supplementary information from withdrawn conflicting national standards. REV/AMD Amendment Z1 of CSN EN 1991-1-5 (2005) Subsector : B02 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2009-11-30 Czech Republic Latest Date for Comments : 2010-12-31 Project ID : 73008809/0001 Draft for public enquiry Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges The aim of the national amendment consists in adding the supplementary information from withdrawn conflicting national standards. REV/AMD Amendment Z1 of CSN EN 1991-1-6 (2006) Subsector : B02 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2009-11-30 Czech Republic Latest Date for Comments : 2010-12-31 Project ID : 73008909/0001 Draft for public enquiry Eurocode 1 - Actions on structures - Part 4: Silos and tanks The aim of the national amendment consists in adding the supplementary information from withdrawn conflicting national standards. REV/AMD Amendment Z1 of CSN EN 1991-4 (2008) Subsector : B02 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2009-07-31 Czech Republic Latest Date for Comments : 2009-11-30 Project ID : 73009009/0001 Draft for public enquiry Terminology of structural reliability

Page 12 The aim of the revision is up-dating of the standard in the connection with the implementation of European Standards (Eurocodes) into ČSN This work follows the analysis study RU/0855/08. REV/AMD CSN 73 020 (1990) Subsector : B02 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2009-09-30 Czech Republic Latest Date for Comments : 2009-11-30 Project ID : 73009109/0001 Draft for public enquiry Asphalt concrete structures of water engineering constructions Terminology and general regulations - Asphalt concrete facing The aim of the revision is up-dating on the basis of contemporary technology of asphalt concrete structures REV/AMD CSN 73 6851 (1980) CSN 73 6852 (1980) Subsector : B02 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2010-03-31 Czech Republic Latest Date for Comments : 2010-07-31 Project ID : 73009509/0001 Draft for public enquiry Designing of roofs - Basic provisions Specification of requirements on basic provisions for designing of roofs REV/AMD CSN 73 1901 (1999) Subsector : B02 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2010-01-31 Czech Republic Latest Date for Comments : 2010-04-30 Project ID : 73014209/0001 Draft for public enquiry Designing and construction of civil protection structures Specification of requirements on designing and construction of civil protection structures REV/AMD CSN 73 9010 (2005) Subsector : B02 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2009-11-30 Czech Republic Latest Date for Comments : 2010-12-31 Project ID : 73014609/0001 Draft for public enquiry

Page 13 Eurocode 1: Actions on structures - Part 1-6: General actions - Actions during execution The aim of the national amendment consists in adding the supplementary information from withdrawn conflicting national standards. REV/AMD Amendment Z1 of CSN EN 1991-1-6 (2006) Subsector : B02 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2009-09-30 Czech Republic Latest Date for Comments : 2009-11-30 Project ID : 73015809/0001 Draft for public enquiry Chimneys and connecting flue pipes - Design, construction and instalation of heatings appliances Specification of requirements on designing and construction of flue and air supply pipes and requirements on instalation of heatings appliances REV/AMD CSN 73 4201 Subsector : B02 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2009-12-31 Czech Republic Latest Date for Comments : 2009-11-30 Project ID : 73264808/0001 Draft for public enquiry Stairways and sliding ramps Basic regulations REV/AMD CSN 73 4130 Subsector : B02 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2010-01-31 Czech Republic Latest Date for Comments : 2010-04-30 Project ID : 73265908/0001 Draft for public enquiry Eurocode 7: Geotechnical design Part 1: General rules Specification National Annex on CSN EN 1997-1 for geotechnical design for building REV/AMD CSN EN 1997-1 (2006) Subsector : B02 Registration Date : 2009-11-06 SUTN Slovakia Project ID : 73909309/0001 Project Established 91.060.40 STN 73 4110/Z2

Walled tall chimneys It is necessary to revise the standard in the relation to implementation of Eurocodes, to withdraw clauses dealing with the design of chimneys. Modified version will include provisions for control and inspections of existing chimneys. Page 14 REV/AMD STN 73 4110 Subsector : B02 Registration Date : 2009-11-06 SUTN Slovakia Project ID : 73909409/0001 Project Established 91.060.40 STN 73 4111/Z2 Tall reinforced concrete chimneys It is necessary to revise the standard in the relation to implementation of Eurocodes, to withdraw clauses dealing with the design of chimneys. Modified version will include provisions for control and inspections of existing chimneys. REV/AMD STN 73 4111 Subsector : B02 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2009-09-30 Czech Republic Latest Date for Comments : 2009-11-30 Project ID : 75003409/0001 Draft for public enquiry Amelioration Irrigation pipe networks The aim of the revision is unification of contemporary legislation and related Czech Standards. REV/AMD CSN 75 4306 (1993) Subsector : B02 Registration Date : 2009-11-30 NBN Draft Issue Date : 2009-11-30 Belgium Latest Date for Comments : 2010-04-30 Project ID : BE610754/0001 Draft for public enquiry 91.010.30, 91.080.10 prnbn EN 1999-1-1-ANB Eurocode 9 : Design of aluminium structures - Part 1-1 : General structural rules - National annex REV/AMD NBN EN 1999-1-1 European : Not Equivalent to EN 1999-1-1 Subsector : B02 Registration Date : 2009-11-30 NBN Draft Issue Date : 2009-11-30 Belgium Latest Date for Comments : 2010-04-30 Project ID : BE610755/0001 Draft for public enquiry

Page 15 91.010.30, 91.080.10 prnbn EN 1999-1-3-ANB Eurocode 9 : Design of aluminium structures - Part 1-3 : Structures susceptible to fatigue - National annex REV/AMD NBN EN 1999-1-3 European : Not Equivalent to EN 1999-1-3 Subsector : B02 Registration Date : 2009-11-30 NBN Draft Issue Date : 2009-11-30 Belgium Latest Date for Comments : 2010-04-30 Project ID : BE610756/0001 Draft for public enquiry 91.010.30, 91.080.10 prnbn EN 1999-1-5-ANB Eurocode 9 : Design of aluminium structures - Part 1-5 : Shell structures - National annexannex REV/AMD NBN EN 1999-1-5 European : Not Equivalent to EN 1999-1-5 Subsector : B02 Registration Date : 2009-11-30 NBN Draft Issue Date : 2009-11-30 Belgium Latest Date for Comments : 2010-04-30 Project ID : BE610757/0001 Draft for public enquiry 13.220.50, 91.010.30, 91.080.10 prnbn EN 1999-1-2-ANB Eurocode 9 : Design of Eurocode 9 : Design of aluminium structures - Part 1-2 : Structural fire design - National annex structures - Part 1-1 : General structural rules - National annex REV/AMD NBN EN 1999-1-2 European : Not Equivalent to EN 1999-1-2 Subsector : B02 Registration Date : 2009-11-30 NBN Draft Issue Date : 2009-11-30 Belgium Latest Date for Comments : 2010-04-30 Project ID : BE610758/0001 Draft for public enquiry 91.010.30, 91.080.10 prnbn EN 1999-1-4-ANB Eurocode 9 : Design of aluminium structures - Part 1-4 : Cold-formed structural sheeting - National annex REV/AMD NBN EN 1999-1-4 European : Not Equivalent to EN 1999-1-4 Subsector : B02 Registration Date : 2009-11-05 AFNOR France Project ID : FA165950/0001 Project Established PR NF P18-832 Special for hydraulic concrete constructionshydraulic binder based needing products. Test of suitability for placing

Page 16 REV/AMD P18-832:199210 (P18-832) Subsector B03: CONCRETE. Subsector : B03 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2009-10-30 Czech Republic Latest Date for Comments : 2009-11-30 Project ID : 73015909/0001 Draft for public enquiry Designing of concrete structures They will used the parts of the ČSN 73 1201, ČSN 73 1204, ČSN 73 1211 and ČSN 73 1212 into this standard in the sequence of Eurocod 2. REV/AMD CSN 73 1201 Subsector : B03 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2009-10-30 Czech Republic Latest Date for Comments : 2009-11-30 Project ID : 73016009/0001 Draft for public enquiry Designing concrete structure of aquiculturing objects They will used the parts of the ČSN 73 1208, ČSN 73 1209, ČSN 73 3149, and ČSN 73 1214 and ČSN 73 1215 into this standard in the sequence of Eurocod 2. REV/AMD CSN 73 1208 Subsector : B03 Registration Date : 2009-11-20 SUTN Slovakia Project ID : 73908709/0001 Project Established 91.080.40 STN 73 2401/Z2 Construction and technical inspection of prestressed concrete structures The modification of STN 73 2401: 1996 relates to the publication of NA STN EN 206-1: 2009. It modifies the clauses related to concrete and mainly to the sorts of cement used at constructing of the prestressed structures REV/AMD STN 73 2401 Subsector : B03 Registration Date : 2009-11-20 SUTN Slovakia Project ID : 73908809/0001 Project Established

Page 17 91.100.30 STN 73 1210 Concretes of special quality Modification of STN 73 1210: 2006 regarding the publication of NA EN 206-1: 2009. Concretes with special characteristics e.g. waterproof, freeze and thaw, abrasion. REV/AMD STN 73 1210 Subsector B07: GLASS. Subsector : B07 Registration Date : 2009-11-04 NEN Netherlands Project ID : 50001522/0001 Project Established 81.040.20 NPR 3599:2009 Concept nl Glass in building - Determination of the minimum glass thickness - In accordance with NEN 2608 This code of practice gives calculation rules and tables for designers to determine the minimum required nominal trade thickness of glass for buildings for the most common pane dimensions, as far as no other demands are made than to prevent breaking as a result of wind loading. Subsector B08: DOORS AND WINDOWS. Subsector : B08 Registration Date : 2009-11-05 AFNOR France Project ID : FA165766/0001 Project Established PR NF P20-611 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - General requirements including the glazing Subsector B09: THERMAL MATTERS. Subsector : B09 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2009-04-30 Czech Republic Latest Date for Comments : 2009-11-30 Project ID : 73266208/0001 Draft for public enquiry External thermal insulating composite systems (ETICS) - Mechanical fastening

Page 18 REV/AMD CSN 73 2902 Subsector B12: MASONRY. Subsector : B12 Registration Date : 2009-11-13 ASI Austria Project ID : 00022754/0001 Project Established ÖNORM B 3358-1 Non-load bearing interior wall systems - Part 1: Definitions, requirements, tests This Austrian Standard represents the basis for the material-adequate choice of of non-load bearing single-leaf or multiple-leaf interior walls of variable structure, production and/or application. This ÖNORM does not apply to: - mobile interior walls (e.g. sliding shutter walls, folding walls) - cabinet walls -interior timber walls - interior glass walls. This ÖNORM refers to the product standards for the building materials to be used. Processing directives, function-related requirements as well as possible requirements for building physics are available from the respective specifications and Austrian Standards. Basically, this ÖNORM applies to walls manufactured on site or prefabricated walls. The tests specified in the different product standards are intended to provide evidence of consistent product quality and/or of fulfilment of standard requirements for the respective product. Subsector : B12 Registration Date : 2009-11-13 ASI Austria Project ID : 00022755/0001 Project Established ÖNORM B 3358-2 Non-load bearing interior wall systems - Part 2: Systems made of bricks This Austrian Standard shall be applied as supplement to ÖNORM B 3358-1 and applies to non-load bearing interior wall systems from bricks according to ÖNORM EN 771-1 and ÖNORM B 3200 which are blocked up "fully pointed" with masonry mortar according to ÖNORM EN 998-2 by the thick bed or thin bed method. The surface of the walls can be produced with rendering or plastering mortar on lime, cement or gypsum basis. Tables A.1, A.2, A.3 and A.4 of Annex A (informative) give required properties of non-load bearing wall systems from bricks, including masonry and rendering and plastering mortar, as concerns protection against fire, thermal and sound insulation according to ÖNORM B 3358-1. Subsector : B12 Registration Date : 2009-11-13 ASI Austria Project ID : 00022756/0001 Project Established

Page 19 ÖNORM B 3358-3 Non-load bearing interior wall systems - Part 3: Systems made of concrete blocks of normal- or lightweight concrete This Austrian Standard shall be applied as supplement to ÖNORM B 3358-1 and applies to non-load bearing interior wall systems from concrete solid units and concrete hollow blocks according to ÖNORM EN 771-3 which are blocked up "fully pointed" with masonry mortar according to ÖNORM EN 998-2. The surface of the walls can be produced with rendering or plastering mortar on lime, cement or gypsum basis. Tables A.1, A.2, A.3 and A.4 of Annex A (informative) give required properties of non-load bearing wall systems from concrete blocks, including masonry and rendering and plastering mortar, as concerns protection against fire, thermal and sound insulation according to ÖNORM B 3358-1. Subsector : B12 Registration Date : 2009-11-13 ASI Austria Project ID : 00022757/0001 Project Established ÖNORM B 3358-4 Non-load bearing interior wall systems - Part 4: Systems made of areated concrete This Austrian Standard shall be applied as supplement to Part 1 and applies to non-load bearing interior wall systems made of aerated concrete blocks according to ÖNORM EN 771-4 and ÖNORM B 3209 which are blocked up "fully pointed" with masonry mortar according to ÖNORM EN 998-2 by the thick bed or thin bed method or made of floor-toceiling aerated concrete elements installed vertically "man-to-man" with special grout. The surface of the walls can be produced, for aerated concrete blocks, with rendering or plastering mortar on lime, cement or gypsum basis, and for aerated concrete elements with body filler. Tables A.1, A.2 and A.3 of Annex A (informative) give required properties of non-load bearing wall systems from aerated concrete blocks and/or elements, including masonry and rendering and plastering mortar, as concerns protection against fire, thermal and sound insulation according to ÖNORM B 3358-1. Subsector : B12 Registration Date : 2009-11-13 ASI Austria Project ID : 00022758/0001 Project Established ÖNORM B 3358-5 Non-load bearing interior wall systems - Part 5: Systems made of gypsum blocks This Austrian Standard shall be applied as supplement to ÖNORM B 3358-1 and applies to non-load bearing interior wall systems made of gypsum blocks according to ÖNORM EN 12859, which are produced with gypsum-based adhesives according to ÖNORM EN 12860. Tables A.1, A.2 and A.3 of Annex A (informative) give required properties of non-load bearing wall systems made of gypsum blocks as concerns protection against fire, thermal and sound insulation according to ÖNORM B 3358-1.

Page 20 Subsector : B12 Registration Date : 2009-11-13 ASI Austria Project ID : 00022759/0001 Project Established ÖNORM B 3358-6 Non-load bearing interior wall systems - Part 6: Drywall systems with sheeting made of gypsum plasterboards This Austrian Standard shall be applied as supplement to ÖNORM B 3358-1 and applies to non-load bearing interior wall systems with substructures made of steel plate profiles according to ÖNORM DIN 18182-1 and gypsum plasterboards according to ÖNORM B 3410 and ÖNORM EN 520 which are assembled on site. This Austrian Standard also applies to free-standing lining without intermediate support with substructures made of steel plate profiles according to ÖNORM DIN 18182-1. For planning and processing, ÖNORM B 3415 shall be applied. Wall coverings (e.g. lining with intermediate support) are not within the scope of this ÖNORM; for these purposes, higher walls than dealt with here are possible. Tables A.1, A.2, A.3, A.4 and A.5 of Annex A (informative) give required properties of nonload bearing wall systems made of gypsum plasterboards as concerns stability, protection against fire, thermal and sound insulation according to ÖNORM B 3358-1. Subsector : B12 Registration Date : 2009-11-13 ASI Austria Project ID : 00022760/0001 Project Established ÖNORM B 3358-7 Non-load bearing interior wall systems - Part 7: Shuttering systems This Austrian Standard shall be applied as supplement to ÖNORM B 3358-1 and applies to non-load bearing interior wall systems from shuttering blocks according to ÖNORM EN 15498 or wood wool boards according to ÖNORM EN 13168 and to ÖNORM B 6000 and/or wood splint insulating boards according to ÖNORM B 6022 with a wall core, in general from unreinforced normal or light concrete. The surface of the walls can be produced with rendering or plastering mortar on lime, cement or gypsum basis. Tables A.1 and A.2 of Annex A (informative) give required properties of non-load bearing wall systems from shuttering concrete, including backfill concrete and rendering and plastering mortar, as concerns protection against fire, thermal and sound insulation according to ÖNORM B 3358-1. Subsector : B12 Registration Date : 2009-11-13 ASI Austria Project ID : 00022761/0001 Project Established ÖNORM B 3358-8 Non-load bearing interior wall systems - Partie 8: Systems made of wood wool boards or

insulating particle boards Page 21 This Austrian Standard shall be applied as supplement to ÖNORM B 3358-1 and applies to non-load bearing interior wall systems from wood wool boards or wood splint insulating boards according to ÖNORM EN 15498 or wood wool boards according to ÖNORM EN 13168 and to ÖNORM B 6000 and/or wood splint insulating particle boards which are blocked up "fully pointed" with building adhesive in butt joint and bed joint by the thin bed method. The surface of the walls can be produced with rendering or plastering mortar on lime, cement or gypsum basis. Tables A.1 and A.2 of Annex A (informative) give required properties of non-load bearing wall systems from wood wool boards and/or wood splint insulating boards, rendering and plastering mortar, as concerns protection against fire, thermal and sound insulation according to ÖNORM B 3358-1. Subsector : B12 Registration Date : 2009-11-05 AFNOR France Project ID : FA166213/0001 Project Established PR NF DTU 55.2 P1-2 Building works - Applied stone wall cladding - Part 1-2 : General criteria for selection of materials Subsector : B12 Registration Date : 2009-11-05 AFNOR France Project ID : FA166214/0001 Project Established PR NF DTU 55.2 P2 Building work - Applied stone wall cladding - Part 2 : Contract bill of special administrative model clauses Subsector : B12 Registration Date : 2009-11-05 AFNOR France Project ID : FA166215/0001 Project Established PR NF DTU 55.2 P1-1 Building works - Applied stone wall cladding - Part 1-1 : Contract bill of technical model clauses

Subsector B13: SOLAR ENERGY. Page 22 Subsector : B13 Registration Date : 2009-11-02 AENOR Spain Project ID : P0034424/0001 Project Established PNE 94901-1 Criteria for classifying the quality of thermal solar systems. Part 1: Qualification Criteria for the quality of the technical documentation This standard specifies requirements for technical documentation for design and sizing of solar thermal systems in buildings Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY. Subsector : B17 Registration Date : 2009-11-19 DIN Germany Project ID : 05800688/0001 Project Established 05800688 Lighting of road tunnels and underpasses; calculation and measurement Subsector : B17 Registration Date : 2009-11-04 NEN Netherlands Project ID : 50001523/0001 Project Established 29.060.20 NPR 3107:1982/A2:2009 Concept nl Supplement to NPR 3107 - Paper-insulated lead-covered power cables - Continuous current rating This amendment is an addition to code of practice 3107 Subsector : B17 Registration Date : 2009-11-04 NEN Netherlands Project ID : 50001524/0001 Project Established 29.060.20 NPR 3626:1994/A2:2009 Concept nl Cables with insulation of cross-linked polyethylene for voltages of 6 kv up to and including 30 kv - Continuous current rating and thermally permissible short-circuit current This document amends NPR 3626.

Page 23 Subsector B18: SCAFFOLDING. Subsector : B18 Registration Date : 2009-11-05 AFNOR France Project ID : FA165721/0001 Project Established PR NF P 93-355 Building site equipement - Temporary peripheral protection for water-resistance works in roof - Product specification, test methods Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT. Subsector : B25 Registration Date : 2009-11-20 LVS Draft Issue Date : 2009-11-19 Latvia Latest Date for Comments : 2010-01-19 Project ID : 02800005/0001 Draft for public enquiry 23.020.30, 71.100.20, 75.160.30, 75.180.01, 75.200 prlvs 451 Installation, Operation and Maintenance of liquefied petroleum gas supply systems This Standard specifies the requirements for installation, operations and maintenance of liquefied petroleum gas supply systems where pressures not exceed 16 bar. This Standard is confirmed to National Construction norms and Safety of Labour regulations and define precautionary measures, which should be taken into considerations for works with liquefied petroleum gas supply systems. Subsector : B25 Registration Date : 2009-11-04 NEN Netherlands Project ID : 50001526/0001 Project Established 75.200, 91.140.40 NEN 7244-7:2005/A1:2009 Concept nl Dutch edition on base of NEN-EN 12327 - Gas supply systems - Pipelines for maximum operating pressure up to an d including 16 bar - Part 7: Specific functional requirements for strength- and tightness testing and for commissioning and decommissioning of gasdistribution pipelines Is applicable to the design, installation, testing, use, disuse, management, maintenance, renovation of pipework and all related activities.

Page 24 Subsector B27: WATERPROOFING MATERIALS. Subsector : B27 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2010-06-30 Czech Republic Latest Date for Comments : 2011-03-31 Project ID : 73011409/0001 Draft for public enquiry Waterproofing of buildings Basic provisions Specification of requirements on basic provisions for waterproofing of buildings REV/AMD CSN 73 0600 (2000) Subsector : B27 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2010-06-30 Czech Republic Latest Date for Comments : 2011-03-31 Project ID : 73011509/0001 Draft for public enquiry Waterproofing of buildings The rehabilitation of damp masonry and additional protection of buildings against ground moisture and against atmospheric water Basic provision Specification of requirements on basic provisions for rehabilitations of damp masonry and additional protection of buildings against ground moisture and against atmospheric water REV/AMD CSN 73 0610 (2000) Subsector : B27 Registration Date : 2009-11-10 UNMZ Draft Issue Date : 2010-06-30 Czech Republic Latest Date for Comments : 2011-03-31 Project ID : 73011609/0001 Draft for public enquiry Waterproofing of buildings Continuous sheet water proofing Basic provisions Specification of requirements on basic provisions for continuous sheet water proofing REV/AMD CSN 73 0606 (2000) Subsector B99: UNDETERMINED. Subsector : B99 Registration Date : 2009-11-13 ASI Austria

Page 25 Project ID : 00022718/0001 Project Established ÖNORM B 2225 Locksmith works and steel construction works and corrosion protection work for steel constructions - Works contract This Austrian Standard includes contractual and procedural provisions for the execution of steel construction works according to ÖNORM EN 1993, locksmith works and metal construction works referring to technical specifations for this works and corrosion protection work for steel constructions. This Standard is based on provisions of ÖNORM EN 1090-2, ÖNORM EN ISO 12944-1 to -8 and ÖNORM C 2370. Excluded are special civil engineering works according to ÖNORM B 2279 and buttressing works according to ÖNORM B 2280. Subsector : B99 Registration Date : 2009-11-05 AFNOR France Project ID : FA166106/0001 Project Established PR NF DTU 60.1 P1-1 Building works - Sanitary plumbing in residential buildings - Part 1-1 : Contract bill of technical model clauses Subsector : B99 Registration Date : 2009-11-05 AFNOR France Project ID : FA166211/0001 Project Established PR NF DTU 60.1 P1-2 Building works - Sanitary plumbing in residential buildings - Part 1-2 : General criteria for selection of materials Subsector : B99 Registration Date : 2009-11-05 AFNOR France Project ID : FA166212/0001 Project Established PR NF DTU 60.1 P2 Building work - Sanitary plumbing in residential buildings - Part 2 : Contract bill of special administrative model clauses

** End of Sector ** Page 26

Information procedure Page 27 Monthly Notifications Register Notifications registered at CMC from 2009-11-01 to 2009-11-30 Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS Register issued on : 2009-12-03

Subsector C01: Food products Page 28 Subsector : C01 Registration Date : 2009-11-05 AFNOR France Project ID : FA165895/0001 Project Established PR NF V03-155 Food analysis - Determination of patuline by High performance liquid chromatography - Mass spectrometry/mass spectrometry method (HPLC-MS/MS) Subsector C03: CHEMISTRY. Subsector : C03 Registration Date : 2009-11-02 AENOR Spain Project ID : P0034246/0001 Project Established PNE 84121 Cosmetic raw materials. Benzoic acid. The scope of the standard is to define the physic-chemical characteristics of benzoic acid for its use as ingredient in cosmetic products. REV/AMD UNE 84121:2005 Subsector : C03 Registration Date : 2009-11-02 AENOR Spain Project ID : P0034419/0001 Project Established PNE 84766 Cosmetic raw materials. Plants extracts. Hydroglycolic extract cucumber (Cucumis sativus l.) This standard determines the specifications required by the hydroglycolic extract of cucumber in cosmetic uses. Subsector : C03 Registration Date : 2009-11-02 AENOR Spain Project ID : P0034420/0001 Project Established PNE 84767 Cosmetic raw materials. Plants extracts. Hydroglycolic extract burdock (Arctium majus l.) This standard determines the specifications required by the hydroglycolic extract of

Page 29 burdock in cosmetic uses. Subsector : C03 Registration Date : 2009-11-02 AENOR Spain Project ID : P0034422/0001 Project Established PNE 84765 Cosmetic raw materials. Plants extracts. Hydroglycolic extract thyme (Thymus vulgaris l.) This standard determines the specifications required by the hydroglycolic extract of thyme in cosmetic uses. Subsector : C03 Registration Date : 2009-11-02 AENOR Spain Project ID : P0034423/0001 Project Established PNE 84768 Cosmetic raw materials. Plants extracts. Hydroglycolic extract horsetail (Equisetum arvense l.) This standard determines the specifications required by the hydroglycolic extract of Horsetail in cosmetic uses. Subsector C13: FERTILIZERS. Subsector : C13 Registration Date : 2009-11-04 NSAI Ireland Project ID : 01078867/0001 Project Established 65.080 I.S. 441 Compost quality - requirements Standard will specify quality requirements for compost produced from source-separated biodegradable materials including biodegradable municipal waste REV/AMD I.S. 441 Subsector C99: UNDETERMINED.

Page 30 Subsector : C99 Registration Date : 2009-11-19 DIN Germany Project ID : 05701405/0001 Project Established 05701405 Food hygiene - Commercial dishwashing - Hygiene requirements, testing ** End of Sector **

Information procedure Page 31 Monthly Notifications Register Notifications registered at CMC from 2009-11-01 to 2009-11-30 Sector F : FUNDAMENTAL STANDARDS Register issued on : 2009-12-03

Subsector F05: MEASURING INSTRUMENTS. Page 32 Subsector : F05 Registration Date : 2009-11-19 DIN Germany Project ID : 06233290/0001 Project Established 06233290 Optical emission spectrometry (OES) - Part 1: Terms for systems with sparks and low pressure discharges Subsector : F05 Registration Date : 2009-11-19 DIN Germany Project ID : 06233292/0001 Project Established 06233292 Optical atomic spectral analysis - Principles and definitions Subsector : F05 Registration Date : 2009-11-30 AFNOR France Project ID : FA166307/0001 Project Established XP E12-020 Personal weighting scales with bio-impedance measurement for body composition analysis - Specifications and test methods Subsector : F05 Registration Date : 2009-11-30 AFNOR France Project ID : FA166308/0001 Project Established NF E12-020 Personal weighting scales with bio-impedance measurement for body composition analysis - Specifications and test methods Subsector F12: INFORMATION PROCESSING SYSTEMS. Subsector : F12 Registration Date : 2009-11-30