Product Data. Features/Benefits. 50LJQ Single-Package Rooftop Heat Pump Units. Nominal 3 to 10 Tons

Product Data 50LJQ Single-Package Rooftop Heat Pump Units Nominal 3 to 10 Tons Single-Package Rooftop Heat Pump Units with the following Standard Features: 2-in. return-air filters Acutrol refrigerant metering device Chronotemp defrost system full-perimeter base rails corrosion-resistant condensate pan refrigerant strainers galvanized steel cabinet with prepainted protection motors with permanently lubricated ball bearings Features/Benefits Compact, vertical discharge units convert to horizontal discharge, combining installation flexibility with efficient performance and easy maintenance. Easy maintenance and conversion All units are shipped from the factory in the vertical discharge configuration for fit-up to standard roof curbs. (One accessory curb fits sizes 004-006; another accessory roof curb fits sizes 008 and 012.) The contractor can order and install the roof curbs early in the construction stage, before decisions on size requirements are made. All units feature roll-formed baserail design with forklift slots and rigging holes for easier maneuvering. Stretchwrap packaging protects the unit during shipment and storage. Copyright 1993 Carrier Corporation Form 50LJQ-3PD

In order to make retro-fit and add-on jobs easier, the unit s design allows for conversion from the vertical discharge configuration to the horizontal discharge configuration by simply interchanging the panels supplied with the unit. The same basic unit can be used for a variety of applications and can be modified at the jobsite. Ductwork connections are made easy by the logical 2 to 1 aspect ratio. On vertical discharge units, ductwork attaches directly to the roof curb. Accessory thru-the-curb service connections allow power and control wiring to be routed through the curb, thereby minimizing roof penetrations. Both power and control connections are made on the same side of the unit to simplify installation. Rounded corners on panels help prevent damage to or puncture of roof materials. Weather-resistant cabinet is coated with a baked enamel finish to ensure long life and attractive appearance. Factory-installed and field-installed electric heaters are available in a wide range of capacities. The single-point wiring kit makes installation simple. Quiet, efficient operation and dependable performance Compressors are fully hermetic with vibration isolators and accumulators for extremely quiet operation. Efficient fan and motor design permits operation at a low sound power of 8.0 bels for sizes 004-006, 8.6 bels for sizes 008 and 012. All coils use state-of-the-art enhanced copper tubing with aluminum fins. The control system is readily adaptable to most conventional and programmable thermostats. In addition, units are suitable for integration into monitor control systems, if required. The patented Chronotemp defrost system uses time and temperature to keep the outdoor coil frost-free for economical, dependable operation. Compressor overcurrent, overtemperature, and high-pressure protection ensure dependability. Crankcase heater (50LJQ004) prevents refrigerant dilution of oil during off cycles and ensures proper lubrication at startup, prolonging compressor life. Table of contents Carrier s exclusive Acutrol metering device precisely controls refrigerant flow, preventing slugging and floodback, while maintaining optimum unit performance. The two-position damper and manual outdoor-air damper provide efficient and inexpensive ventilation by admitting up to 25% outdoor air. Varislide economizer permits lowcost operation by utilizing cool outdoor air for free cooling. Reliable sliding plate damper is easily adjusted for 100% outdoor air, 100% return air, or any proportions of mixed air. Economizer operation is controlled by Accusensor I dry-bulb thermostat that senses outdoor-air temperature. Accessory upgrade kits include Accusensor II solid-state enthalpy control and Accusensor III differential enthalpy control. Page Features/Benefits...1,2 Model Number Nomenclature...2 ARI Capacities...3 Physical Data...4,5 Options and Accessories...6,7 Base Unit Dimensions...8,9 Accessory Dimensions...10,11 Selection Procedure...12 Performance Data...13-24 Electrical Data...25,26 Typical Piping and Wiring...27 Controls...28,29 Application Data...30 Typical Control Wiring Schematic...31,32 Guide Specifications...33-38 Model number nomenclature *Refer to 50LJQ price pages for FIOP (factory-installed option) code table. 2

ARI* capacities UNIT 50LJQ NOMINAL TONS CFM COOLING HEATING High-Temp HEATING Low-Temp SEER SOUND Cap. RATING (Btuh) EER Cap. (Btuh) COP HSPF Cap. With Without (Btuh) COP (Bels) Timer** Timer 004 3 1200 36,400 10.60 10.20 9.40 35,200 3.10 6.80 18,400 2.00 8.0 005 4 1760 47,000 10.60 10.40 9.10 47,000 3.10 7.00 28,600 2.14 8.0 006 5 2000 59,000 10.90 10.65 9.25 62,000 3.20 7.30 35,800 2.16 8.0 COOLING HEATING High-Temp HEATING Low-Temp SOUND UNIT NOMINAL 50LJQ TONS CFM Cap. RATING (Btuh) EER Cap. (Btuh) COP Cap. (Btuh) COP (Bels) IPLV 008 7 1 2 3000 92,000 9.10 96,000 3.00 55,000 2.00 8.6 10.3 012 10 4000 113,000 9.00 116,000 3.14 65,000 2.02 8.6 9.8 Bels Sound Levels (1 bel = 10 decibels) Cap. Net Capacity (Btuh) CFM Standard Cubic Ft per Minute COP Coefficient of Performance EER Energy Efficiency Ratio HSPF Heating Seasonal Performance Factor IPLV Integrated Part Load Value SEER Seasonal Energy Efficiency Ratio *Air-Conditioning & Refrigeration Institute. Applies only to units with capacity of 60,000 Btuh or less. **SEER ratings with timer are made using time delay relay part number HN67SK031. NOTES: Rated in accordance with ARI Standard 210/240-89 and 270-84. Ratings are net values, reflecting effects of circulating fan heat. Supplementary electric heat is not included. Ratings based on: Cooling Standard: 80 F db (dry bulb), 67 F wb (wet bulb) indoor enteringair temperature and 95 F db outdoor entering-air temperature. IPLV Standard: 80 F db, 67 F wb indoor entering-air temperature and 80 F db outdoor entering-air temperature. High-Temp Heating Standard: 70 F db indoor entering-air temperature and 47 F db, 43 F wb outdoor entering-air temperature. Low-Temp Heating Standard: 70 F db indoor entering-air temperature and 17 F db, 15 F wb outdoor entering-air temperature. 3

Physical data BASE UNIT 50LJQ 004 005 006 NOMINAL CAPACITY (tons) 3 4 5 OPERATING WEIGHT (lb) Unit 490 500 520 Economizer 34 34 34 Roof Curb 115 115 115 COMPRESSOR Reciprocating Scroll Quantity 1 1 1 Oil (oz) 45 60 75 REFRIGERANT TYPE R-22 Operating Charge (lb-oz) 5-11 6-3 8-5 OUTDOOR FAN Propeller Quantity...Diameter (in.) 1...26 1...26 1...26 Nominal Cfm 4100 4100 3800 Motor Hp...Rpm 1 3...850 1 3...850 1 3...850 OUTDOOR COIL Enhanced Copper Tubes, Aluminum Fins Rows...Fins/in. 1...17 1...17 2...17 Total Face Area (sq ft) 12.25 12.25 12.25 INDOOR FAN Centrifugal Size (in.) 10x10 10x10 10x10 Type Drive Std Direct Direct Belt Alt Direct Belt Nominal Cfm 1200 1600 2000 Maximum Continuous Bhp Std.34.81 1.70 Alt.81 1.20 Motor Frame Std 48 48 56 Alt 48 56 Nominal Rpm High/Low Std 860/845 1080/970 Alt 1080/970 Fan Rpm Std 875-1190 Alt 970-1310 Motor Bearing Type Ball Ball Ball Maximum Fan Rpm 2100 2100 2100 Motor Pulley Pitch Diameter A/B (in.) Std 2.8/3.8 Alt 1.9/2.9 Fan Pulley Pitch Diameter (in.) Std 5.5 Alt 3.5 Belt Type...Length (in.) Std A...40 Alt A...31 Pulley Center Line Distance (in.) Std 14.7-15.5 Alt 10.0-12.4 Speed Change per Full Turn of Std 63 Movable Pulley Flange (rpm) Alt 66 Movable Pulley Maximum Full Turns Std 5 From Closed Position Alt 5 Factory Setting Full Turns Open Std 3 Alt 3 Factory Speed Setting (rpm) Std 1005 Alt 1110 Fan Shaft Diameter at Pulley (in.) 5 8 INDOOR COIL Enhanced Copper Tubes, Aluminum Double Wavy Fins, Rows...Fins/in. 2...15 2...15 3...15 Total Face Area (sq ft) 5.5 5.5 5.5 HIGH-PRESSURE SWITCH (psig)* Standard Compressor Internal Relief 625 Cutout 428 Reset (Auto.) 320 LOSS-OF-CHARGE/LOW-PRESSURE SWITCH* (Liquid Line) (psig) Cutout 7±3 Reset (Auto.) 22±7 FREEZE PROTECTION THERMOSTAT * Opens (F) 30±5 Closes (F) 45±5 OUTDOOR-AIR INLET SCREENS Cleanable Quantity...Size (in.) 1...20 x 24 x 1 RETURN-AIR FILTERS Throwaway Quantity...Size (in.) 2...16 x 25 x 2 Bhp Brake Horsepower *Indicates a FIOP (factory-installed option) that requires a control kit. 4

BASE UNIT 50LJQ 008 012 NOMINAL CAPACITY (tons) 7 1 2 10 OPERATING WEIGHT (lb) Unit 840 940 Economizer 44 44 Roof Curb 223 223 COMPRESSOR Scroll Quantity 2 2 Oil (oz) (each compr) 55 70 REFRIGERANT TYPE R-22 Operating Charge (lb-oz) Circuit 1 7-5 9-2 Circuit 2 7-0 8-6 OUTDOOR FAN Propeller Quantity...Diameter (in.) 1...26 1...26 Nominal Cfm 6500 7000 Motor Hp...Rpm 3 4...1100 3 4...1100 OUTDOOR COIL Enhanced Copper Tubes, Aluminum Fins Rows...Fins/in. 2...17 2...17 Total Face Area (sq ft) 20.5 25.0 INDOOR FAN Centrifugal Size (in.) 15x15 15x15 Type Drive Std Belt Belt Alt Belt Belt Nominal Cfm 3000 4000 Maximum Continuous Bhp Std 2.4 2.4 Alt 2.9 Motor Frame Std 56 56 Alt 56 Fan Rpm Range Std 590-840 685-935 Alt 685-935 835-1085 Motor Bearing Type Ball Ball Maximum Fan Rpm 2100 2100 Motor Pulley Pitch Diameter Std 2.4/3.4 2.8/3.8 A/B (in.) Alt 2.8/3.8 3.4/4.4 Fan Pulley Pitch Diameter (in.) Std 7.0 7.0 Alt 7.0 7.0 Belt Type...Length (in.) Std A...48 A...48 Alt A...48 A...48 Pulley Center Line Distance (in.) Std 16.75-19.25 15.85-17.50 Alt 16.75-19.25 15.85-17.50 Fan Shaft Diameter at Pulley (in.) 1 1 Speed Change per Full Turn of Movable Pulley Flange (rpm) Std Alt 50 50 50 50 Movable Pulley Maximum Full Std 5 5 Turns from Closed Position Alt 5 5 Factory Setting Full Turns Open Std 5 5 Alt 5 5 Factory Speed Setting (rpm) Std 590 685 Alt 685 835 INDOOR COIL Enhanced Copper Tubes, Aluminum Double Wavy Fins Rows...Fins/in. 3...15 3...15 Total Face Area (sq ft) 8.0 10.0 HIGH-PRESSURE SWITCH (psig)* Standard Compressor Internal Relief 625 Cutout 428 Reset (Auto.) 320 LOSS-OF-CHARGE/LOW-PRESSURE SWITCH* (Liquid Line) (psig) Cutout 7±3 Reset (Auto.) 22±7 FREEZE PROTECTION THERMOSTAT* Opens (F) 30 5 Closes (F) 45 5 OUTDOOR-AIR INLET FILTER Cleanable Quantity...Size (in.) 1...20 x 25 x 1 1...16 x 25 x 1 RETURN-AIR FILTERS Throwaway Quantity...Size (in.) 4...16 x 20 x 2 4...20 x 20 x 2 Bhp Brake Horsepower *Indicates a FIOP (factory-installed option) that requires a control kit. 5

Options and accessories ITEM OPTION* ACCESSORY Electric Heater X X Integrated Economizer X X Manual Outdoor-Air Damper X X Two-Position Outdoor-Air Damper X X Alternate Drive (008) X Alternate Motor and Drive (004,005,012) X Roof Curb X Thru-the-Curb Service Connections X Thermostat and Subbase X Electronic Programmable Thermostat X Time Guard II Control Circuit X Motormaster Head Pressure Control (004-006) X Motormaster II Head Pressure Control (004-012) X Accusensor II Enthalpy Control X Accusensor III Differential Enthalpy Control X Condenser Coil Hail Guard Assembly X Remote Control Panel X Filter Door Access Panel Kit X X Economizer Upgrade Package X Controls Upgrade Kit X X External Filter Package (004-006) X Emergency Heat Package X TIME GUARD II CONTROL Time Guard II Control automatically prevents compressor from restarting for at least 5 minutes after a shutdown. Accessory prevents short cycling of compressor if thermostat is rapidly changed. Time Guard II device mounts in the control compartment of unit. ELECTRONIC PROGRAMMABLE THERMOSTAT *Factory installed. Field installed. HEAD PRESSURE CONTROL The 50LJQ004,005,006,008,012 standard units are designed to operate at outdoor temperatures down to 25 F. With accessory Motormaster control (outdoor-fan speed modulation for unit sizes 004-006) or Motormaster II control (outdoor-fan cycling for unit sizes 004,005,006,008,012), units can operate at outdoor temperatures down to 20 F. The head pressure controls, which mount in the outdoor section, modulate the outdoor-fan motor to maintain correct condensing temperature. Electronic programmable thermostat provides efficient temperature control by allowing you to program heating and cooling setbacks and setups with provisions for weekends and holidays. Accessory remote sensing package is also available to provide tamperproof control in high traffic spaces. HAIL GUARD MOTORMASTER (Sizes 004-007 only) MOTORMASTER II (Sizes 004,005,006,008,012) Hail guard accessory protects coils against damage from hail and other flying debris (field installed). 6

OUTDOOR TEMP. F 55 OPEN 1 3 T P P1 DAMPER OPEN T1 DAMPER CLOSED 4 D C B A 2 OR UNPOWERED STATE CW SETPOINTS CCW S 5 3 2 1 24VAC B C D TR ELECTRIC HEATER ACCUSENSOR II MINIMUM POSITION SO REV. B 198818A % H U M I D I T Y 90 70 60 30 10 50 60 65 70 75 RUSH AT 24VAC 3 ma MIN. AT 11 VDC CONTACTS SHOWN IN HIGH ENTHALPY CONTACT RATINGS: 1.5A RUN, 3.5A IN TR TR1 ENTHALPY CONTROL 80 85 REV. 97-3672 Electric heaters are available in a wide range of capacities for factory or field installation. ACCUSENSOR III THERMOSTAT + Zone thermostat (24 v) provides one- or 2-stage cooling for control of unit. Matching subbases are available with or without tamperproof switches and automatic changeover. VARISLIDE ECONOMIZER Accusensor economizer controls help provide efficient, economical economizer operation. The standard Accusensor I dry-bulb sensor measures outdoor temperature. Accusensor II solid-state enthalpy control senses both dry and wet bulb of the outdoor air to provide an accurate enthalpy reading. Accusensor III differential enthalpy sensor compares outdoor temperature and humidity to return-air temperature and humidity and determines the most economical mixture of air. EMERGENCY HEAT CONTROL PACKAGE Exclusive Varislide economizer damper design saves energy while providing economical and reliable cooling. A sliding plate on the face of the economizer controls the amount of outdoor air entering the system. Closed, it provides a leakproof seal which prevents ambient air from seeping in or conditioned air from seeping out. It can be easily adjusted for 100% outdoor air or any proportions of mixed air. Like the base unit, the economizer is easily converted for horizontal discharge applications. Emergency heat control package allows emergency operation of electric heat and fans by bypassing compressor circuits and outdoor thermostats. 7

Base unit dimensions 50LJQ004-006 STD UNIT WEIGHT ECONOMIZER WEIGHT CORNER WEIGHT A CORNER WEIGHT B CORNER WEIGHT C CORNER WEIGHT D UNIT Lb Kg Lb Kg Lb Kg Lb Kg Lb Kg Lb Kg 50LJQ004 490 222 34 15.4 103 46.7 82 37.2 135 61.2 170 77.1 50LJQ005 500 227 34 15.4 105 47.6 83 37.6 137 62.1 174 78.9 50LJQ006 520 236 34 15.4 110 49.9 87 39.5 143 64.9 181 82.1 A B C D E F CONNECTION SIZES 1 3 8 dia [35] field power supply hole 2 dia [51] power supply knockout 1 3 4 dia [44] pressure gage hose opening 7 8 dia [22] field control wiring hole 3 4-14 NPT condensate drain 2 1 2 dia [64] power supply knockout NOTES: 1. z Dimensions in [ ] are in millimeters. 2. Center of gravity. 3. Direction of airflow. 4. On vertical discharge units, ductwork to be attached to accessory roof curb only. For horizontal discharge units, field-supplied flanges should be attached to horizontal discharge openings and all ductwork should be attached to the flanges. 5. Minimum clearance (local codes or jurisdiction may prevail): a. Bottom to combustible surfaces (when not using curb) 0 in. on vertical discharge units, and 1 in. on horizontal discharge units. b. Outdoor coil, for proper airflow, 36 in. one side, 12 in. the other. The side getting the greater clearance is optional. c. Overhead, 60 in. to assure proper outdoor fan operation. d. Horizontal supply and return end, 0 inches. e. On horizontal discharge units equipped with electric heat, a minimum clearance to combustibles of 1 in. is required for the first 12 in. of ductwork. f. Between units, control box side, 42 in. per NEC (National Electrical Code). g. Between unit and ungrounded surfaces, control box side, 36 in. per NEC. h. Between unit and block or concrete walls and other grounded surfaces, control box side, 42 in. per NEC. 6. With the exception of the clearance for the outdoor coil as stated in Notes 5b and c, a removable fence or barricade requires no clearance. 7. Units may be installed on combustible floors made from wood or class A, B, or C roof covering material. *Indicates vertical center of gravity. Indicates horizontal center of gravity. 8

Base unit dimensions 50LJQ008, 012 STD UNIT WEIGHT ECONOMIZER WEIGHT CORNER WEIGHT A CORNER WEIGHT B CORNER WEIGHT C CORNER WEIGHT D H J K UNIT Lb Kg Lb Kg Lb Kg Lb Kg Lb Kg Lb Kg Ft-in. mm Ft-in. mm Ft-in. mm 50LJQ008 840 381 44 20 182 83 156 71 231 105 271 123 2-0 7 8 632 3-5 5 16 1050 2-9 11 16 856 50LJQ012 940 426 44 20 204 93 174 79 259 117 303 137 1-2 7 8 378 4-1 5 16 1253 3-0 3 8 924 NOTES: 1. z Dimensions in [ ] are in millimeters. 2. Center of gravity. 3. Direction of airflow. 4. Ductwork to be attached to accessory roof curb only. 5. Minimum clearance (local codes or jurisdiction may prevail): a. Bottom to combustible surfaces (when not using curb) 0 inches. On horizontal discharge units with electric heat, 1-in. clearance to ductwork is required for first 12 in. of ductwork b. Outdoor coil, for proper airflow, 36 in. one side, 12 in. the other. The side getting the greater clearance is optional. c. Overhead, 60 in. to assure proper outdoor fan operation. d. Between units, control box side, 42 in. per NEC (National Electrical Code). e. Between unit and ungrounded surfaces, control box side, 36 in. per NEC. f. Between unit and block or concrete walls and other grounded surfaces, control box side, 42 in. per NEC. g. Horizontal supply and return end, 0 inches. 6. With the exception of the clearance for the outdoor coil as stated in note 5b and c, a removable fence or barricade requires no clearance. 7. Units may be installed on combustible floors made from wood or class A, B, or C roof covering material. A B C D E F CONNECTION SIZES 1 3 8 dia [35] field power supply hole 2 1 2 dia [64] power supply knockout 1 3 4 dia [44] pressure gage hose opening 7 8 dia [22] field control wiring hole 3 4-14 NPT condensate drain 2 dia [51] power supply knockout *Indicates vertical center of gravity. Indicates horizontal center of gravity. 9

Accessory dimensions 50LJQ004-006 ROOF CURB ACCESSORY 50DJ900771 50DJ900781 A UNIT SIZE 1-2 [356] 2-0 [610] 50LJQ004-006 UNIT SIZE F POWER G CONTROL CONNECTOR PKG ACY 50LJQ004-006 3 4 [19] NPT or 3 1 1 4 [32] 4 [19] NPT 50DJ900801 NOTES: 1. Roof curb accessory is shipped unassembled. 2. Insulated panels. 3. Dimensions in [ ] are in millimeters. 4. Roof curb: galvanized steel. 5. Attach ductwork to curb. (Flanges of duct rest on curb). 6. Service clearance 4 ft on each side. 7. Direction of airflow. 10

Accessory dimensions 50LJQ008,012 SERVICE PLATE SIZES UNIT SIZE F POWER G CONTROL 50LJQ008,012 1 [25] NPT or 2 [51] NPT CONNECTOR PKG ACCESSORY 3 4 NPT 50DJ901311 ROOF CURB ACCESSORY 50DJ901371 50DJ901381 A 1-2 [356] 2-0 [610] UNIT SIZE 50LJQ008,012 NOTES: 1. Roof curb accessory is shipped unassembled. 2. Insulated panels. 3. Dimensions in [ ] are in millimeters. 4. Roof curb: galvanized steel. 5. Attach ductwork to curb (flanges of duct rest on curb). 6. Service clearance 4 ft on each side. 7. Direction of airflow. 11

Selection procedure (with 50LJQ005 example) I Determine cooling and heating requirements at design conditions: Given: Required Cooling Capacity (TC)... 45,000 Btuh Sensible Heat Capacity (SHC)... 32,000 Btuh Required Heating Capacity...43,000 Btuh Outdoor Entering-Air Temperature...95 F Outdoor-Air Winter Design Temperature...0 F Indoor-Air Winter Design Temperature...70 F Indoor Entering-Air Temperature... 80 F edb (entering air, dry bulb), 67 F ewb (entering air, wet bulb) Indoor-Air Quantity...1600 cfm External Static Pressure....45 in. wg Electrical Characteristics (V-Ph-Hz)... 230-3-60 II Select unit based on required cooling capacity. Enter Cooling Capacities table at condenser entering temperature of 95 F, indoor air entering at 1600 cfm and 67 F ewb. The 50LJQ005 unit will provide a total cooling capacity of 49,000 Btuh and a sensible heat capacity of 35,100 Btuh. For indoor-air temperature other than 80 F edb, calculate sensible heat capacity correction, as required, using the formula found in Note 2 following the cooling capacities tables. NOTE: Unit ratings are gross capacities and do not include the effect of indoor-fan motor heat. To calculate net capacities, see Step V. III Select electric heat. Enter the Instantaneous and Integrated Heating Ratings table at 1600 cfm. At 70 F return indoor air and 0 F air entering outdoor coil, the integrated heating capacity is 21,700 Btuh. (Select integrated heating capacity value since deductions for outdoor-coil frost and defrosting have already been made. No correction is required.) The required heating capacity is 43,000 Btuh. Therefore, 21,300 Btuh (43,000-21,700) additional electric heat is required. Determine additional electric heat capacity in kw. 21,300 Btuh = 6.2 kw of heat required. 3413 Btuh/kW Enter the Electric Heating Capacities table for 50LJQ005 at 208/230, 3 phase. The 8.7-kW heater at 240 v most closely satisfies the heating required. To calculate kw at 230 v, use the Multiplication Factors table. 8.7 kw x.92 = 8.0 kw 8.7 kw x.92 x 3413 = 27,318 Btuh Total unit heating capacity is 49,018 Btuh (21,700 + 27,318). IV Determine fan speed and power requirements at design conditions. Before entering Fan Performance tables, calculate the total static pressure required based on unit components. From the given and the Pressure Drop tables, find: External static pressure.45 in. wg Economizer.05 in. wg Electric heat.09 in. wg Total static pressure.59 in. wg Enter the Fan Performance table for 50LJQ005 vertical discharge. At 1600 cfm and 230-v high speed, the standard motor will deliver.70 in. wg static pressure and.74 brake horsepower (bhp). This will adequately handle job requirements. NOTE: Convert bhp to Watts using the formula found in the note following the Indoor-Fan Motor Efficiency table. For this example: 746 x Bhp Watts = Motor Efficiency 746 x.74 Watts = 79 Watts = 700 V Determine net capacities. Capacities are gross and do not include the effect of indoor-fan motor (IFM) heat. Determine net cooling capacity as follows: Net capacity = Total capacity IFM heat = 49,000 Btuh (700 Watts x 3.413 Btuh/Watts) = 49,000 Btuh 2389 Btuh = 46,611 Net sensible capacity = 35,100 Btuh 2389 Btuh = 32,711 Btuh Integrated heating capacity is maximum (instantaneous) capacity less the effect of frost on the outdoor coil and the heat required to defrost it. Therefore, net capacity is equal to 49,018 Btuh, the total heating capacity determined in Step III. 12

Performance data COOLING CAPACITIES 50LJQ004 (3 Tons) Temp (F) Outdoor Entering Air (Edb) 85 95 105 115 Indoor Entering Air Cfm/Bf 900/0.06 1200/0.08 1500/0.10 Indoor Entering Air Ewb (F) 72 67 62 72 67 62 72 67 62 TC 43.2 38.9 34.7 44.8 40.9 36.8 45.4 41.6 38.0 SHC 19.9 24.5 28.6 21.3 27.5 33.1 23.0 29.8 36.8 kw 3.01 2.92 2.83 3.05 2.98 2.90 3.08 3.00 2.95 TC 41.4 36.9 31.0 42.9 38.8 34.0 44.2 40.0 35.8 SHC 19.4 23.7 26.9 21.1 27.1 32.1 22.8 29.8 35.8 kw 3.25 3.15 3.06 3.29 3.21 3.12 3.34 3.25 3.16 TC 39.0 33.0 26.7 40.9 34.4 29.7 41.9 37.4 33.1 SHC 18.6 22.2 24.9 20.7 26.4 29.6 22.3 29.6 33.1 kw 3.49 3.38 3.28 3.55 3.44 3.35 3.58 3.50 3.42 TC 35.6 28.6 23.0 38.3 30.8 26.5 39.3 32.5 29.8 SHC 17.4 20.5 22.9 19.9 24.2 26.5 21.9 27.6 29.7 kw 3.74 3.62 3.51 3.81 3.68 3.61 3.85 3.73 3.67 50LJQ008 (7 1 2 Tons) Temp (F) Outdoor Entering Air (Edb) 85 95 105 115 Indoor Entering Air Cfm/Bf 2250/0.07 3000/0.10 3750/0.12 Indoor Entering Air Ewb (F) 72 67 62 72 67 62 72 67 62 TC 106.1 96.8 88.2 110.7 101.8 92.9 113.3 104.4 96.0 SHC 50.7 62.4 73.9 55.4 71.0 85.3 59.8 78.7 94.2 kw 7.22 7.07 6.96 7.31 7.17 7.06 7.37 7.22 7.13 TC 102.7 93.3 84.0 106.8 98.2 89.2 109.2 100.9 92.4 SHC 49.5 61.1 72.2 54.2 70.0 83.6 58.6 77.9 91.7 kw 8.05 7.91 7.77 8.13 8.01 7.88 8.18 8.07 7.95 TC 98.3 89.7 79.5 102.3 94.0 84.6 104.5 96.5 88.8 SHC 47.8 59.8 69.9 52.7 68.5 81.3 57.1 76.4 88.7 kw 8.94 8.82 8.65 9.02 8.91 8.77 9.08 8.96 8.86 TC 93.9 85.4 74.1 97.5 89.3 79.2 99.8 91.6 85.1 SHC 46.3 58.1 67.4 51.1 66.7 78.3 55.6 74.4 85.1 kw 9.90 9.79 9.60 9.97 9.85 9.73 10.04 9.90 9.84 50LJQ005 (4 Tons) Temp (F) Outdoor Entering Air (Edb) 85 95 105 115 Indoor Entering Air Cfm/Bf 1200/0.15 1600/0.19 2000/0.22 Indoor Entering Air Ewb (F) 72 67 62 72 67 62 72 67 62 TC 53.0 48.7 44.4 55.3 51.1 47.0 56.3 52.3 48.5 SHC 25.5 31.7 37.5 27.8 35.7 42.9 29.5 38.6 46.9 kw 3.72 3.64 3.57 3.78 3.70 3.63 3.80 3.72 3.66 TC 51.1 46.7 40.5 53.3 49.0 43.3 53.8 50.2 46.4 SHC 25.0 31.0 35.5 27.2 35.1 41.0 28.8 38.4 45.9 kw 4.14 4.05 3.95 4.19 4.11 4.01 4.19 4.13 4.07 TC 49.0 42.8 36.4 50.7 46.1 39.0 52.2 47.7 42.8 SHC 24.2 29.4 33.3 26.6 34.1 38.5 28.6 37.9 42.8 kw 4.59 4.47 4.34 4.63 4.55 4.41 4.67 4.58 4.49 TC 46.1 38.5 31.9 48.4 41.5 35.6 49.3 43.3 39.1 SHC 23.2 27.7 31.0 25.8 32.3 35.6 28.0 36.2 39.1 kw 5.07 4.91 4.76 5.13 4.98 4.86 5.14 5.03 4.95 50LJQ012 (10 Tons) Temp (F) Outdoor Entering Air (Edb) 85 95 105 115 Indoor Entering Air Cfm/Bf 3000/0.08 4000/0.11 5000/0.13 Indoor Entering Air Ewb (F) 72 67 62 72 67 62 72 67 62 TC 129.4 117.8 105.9 134.3 123.2 111.5 136.1 126.0 115.5 SHC 62.5 77.6 92.1 68.0 88.7 106.2 72.7 98.3 115.2 kw 9.16 8.94 8.74 9.27 9.09 8.88 9.32 9.16 8.97 TC 124.6 112.3 97.2 129.4 117.7 104.0 132.7 120.4 111.1 SHC 60.7 75.8 88.2 67.0 87.2 102.7 72.9 97.0 111.0 kw 10.22 9.99 9.72 10.34 10.13 9.89 10.44 10.21 10.04 TC 119.1 103.4 86.8 123.7 109.9 95.7 126.3 113.7 103.7 SHC 58.8 72.6 82.9 65.7 84.9 95.7 71.7 95.3 103.7 kw 11.39 11.08 10.75 11.53 11.26 10.98 11.61 11.37 11.17 TC 110.8 93.4 77.3 116.4 98.9 87.9 119.0 102.4 96.2 SHC 56.2 68.7 76.9 63.7 80.7 87.9 70.4 91.2 96.2 kw 12.63 12.24 11.87 12.80 12.41 12.17 12.88 12.56 12.38 50LJQ006 (5 Tons) Temp (F) Outdoor Entering Air (Edb) 85 95 105 115 Indoor Entering Air Cfm/Bf 1500/0.08 2000/0.11 2500/0.13 Indoor Entering Air Ewb (F) 72 67 62 72 67 62 72 67 62 TC 66.7 61.3 55.0 69.7 64.1 58.3 70.8 65.5 60.7 SHC 32.4 40.5 47.8 35.6 46.1 55.2 37.8 50.8 60.3 kw 4.48 4.40 4.30 4.55 4.46 4.37 4.57 4.49 4.41 TC 64.6 58.4 49.6 67.1 61.2 53.5 68.4 62.8 58.2 SHC 31.6 39.4 45.2 35.0 45.1 52.5 37.7 50.2 58.2 kw 4.99 4.89 4.74 5.05 4.95 4.83 5.07 4.98 4.92 TC 61.4 53.2 44.1 64.1 56.9 49.2 65.5 59.5 53.7 SHC 30.6 37.4 42.2 34.2 43.7 49.2 37.4 49.4 53.7 kw 5.54 5.39 5.22 5.60 5.47 5.34 5.63 5.53 5.43 TC 57.2 46.9 39.5 60.5 50.2 45.0 61.7 53.4 48.9 SHC 29.2 34.9 39.3 33.1 41.1 45.0 36.5 47.0 48.9 kw 6.12 5.92 5.76 6.19 6.00 5.89 6.22 6.07 5.99 Standard Ratings Bf Bypass Factor Edb Entering Dry Bulb Ewb Entering Wet Bulb kw Compressor Motor Power Input SHC Sensible Heat Capacity (1000 Btuh) Gross TC Total Capacity (1000 Btuh) Gross NOTES: 1. Direct interpolation is permissible. Do not extrapolate. 2. The following formulas may be used: t = t sensible capacity (Btuh) ldb edb 1.10 x cfm t lwb = Wet-bulb temperature corresponding to enthalpy of air leaving indoor coil (h lwb) h = h total capacity (Btuh) lwb ewb 4.5 x cfm Where: h ewb = Enthalpy of air entering indoor coil 3. The SHC is based on 80 F edb temperature of air entering indoor coil. Below 80 F edb, subtract (corr factor x cfm) from SHC. Above 80 F edb, add (corr factor x cfm) to SHC. Correction Factor = 1.10 x (1 BF) x (edb 80). 13

Performance data (cont) 50LJQ004 (3 Tons) RETURN AIR (F db) 55 70 80 CFM (Std Air) 900 1200 1500 900 1200 1500 900 1200 1500 INSTANTANEOUS AND INTEGRATED HEATING RATINGS TEMPERATURE AIR ENTERING OUTDOOR COIL (F db at 70% rh) -20-10 0 10 17 30 40 47 50 60 Cap. 8.56 7.87 12.30 11.30 16.10 14.80 19.70 18.10 22.30 20.30 27.80 24.40 32.90 31.50 36.50 36.50 38.00 38.00 42.90 42.90 kw 1.96 2.12 2.28 2.45 2.56 2.80 3.03 3.18 3.24 3.46 Cap. 9.18 8.45 13.00 12.00 16.80 15.50 20.50 18.70 23.10 21.00 28.80 25.30 34.20 32.70 37.90 37.90 39.20 39.20 43.70 43.70 kw 2.03 2.19 2.34 2.49 2.59 2.80 2.99 3.12 3.17 3.32 Cap. 9.60 8.83 13.50 12.40 17.40 16.00 21.10 19.30 23.60 21.60 29.60 25.90 34.80 33.20 38.40 38.40 39.70 39.70 43.90 43.90 kw 2.11 2.25 2.40 2.54 2.63 2.83 2.99 3.10 3.13 3.26 Cap. 6.35 5.84 10.20 9.35 14.00 12.90 17.80 16.30 20.50 18.70 26.00 22.80 30.90 29.60 34.30 34.30 35.80 35.80 40.60 40.60 kw 1.97 2.16 2.34 2.54 2.68 2.96 3.21 3.39 3.47 3.71 Cap. 6.92 6.36 10.80 9.96 14.70 13.60 18.70 17.10 21.40 19.50 27.00 23.70 32.20 30.80 35.70 35.70 37.10 37.10 41.80 41.80 kw 2.05 2.23 2.41 2.59 2.71 2.97 3.19 3.35 3.40 3.59 Cap. 7.24 6.66 11.30 10.40 15.30 14.10 19.30 17.60 22.00 20.10 27.70 24.30 33.00 31.60 36.70 36.70 38.10 38.10 42.70 42.70 kw 2.12 2.30 2.47 2.64 2.76 3.00 3.20 3.35 3.39 3.56 Cap. 4.62 4.25 8.51 7.83 12.40 11.40 16.40 15.00 19.10 17.40 24.80 21.70 29.50 28.30 32.80 32.80 34.30 34.30 39.00 39.00 kw 1.98 2.18 2.38 2.60 2.75 3.06 3.33 3.52 3.61 3.88 Cap. 4.98 4.58 9.07 8.35 13.20 12.10 17.20 15.70 20.00 18.30 25.80 22.60 30.80 29.50 34.30 34.30 35.70 35.70 40.70 40.70 kw 2.05 2.25 2.44 2.64 2.78 3.07 3.32 3.49 3.56 3.79 Cap. 5.34 4.92 9.53 8.77 13.70 12.60 17.80 16.30 20.70 18.90 26.50 23.20 31.60 30.30 35.20 35.20 36.60 36.60 41.10 41.10 kw 2.12 2.32 2.51 2.70 2.84 3.10 3.33 3.49 3.54 3.72 50LJQ005 (4 Tons) RETURN AIR (F db) 55 70 80 CFM (Std Air) 1200 1600 2000 1200 1600 2000 1200 1600 2000 TEMPERATURE AIR ENTERING OUTDOOR COIL (F db at 70% rh) -20-10 0 10 17 30 40 47 50 60 Cap. 15.70 14.50 19.60 18.10 24.20 22.30 28.40 26.00 31.30 28.60 38.20 33.50 43.90 43.90 48.60 48.60 49.80 49.80 55.30 55.30 kw 2.83 2.97 3.12 3.26 3.36 3.60 3.80 3.98 4.02 4.23 Cap. 16.40 15.10 20.50 18.90 24.90 22.90 29.00 26.60 32.10 29.20 39.00 34.20 45.00 45.00 49.40 49.40 50.80 50.80 55.50 55.50 kw 2.91 3.03 3.15 3.26 3.35 3.53 3.70 3.83 3.87 4.00 Cap. 17.00 15.60 21.00 19.40 25.40 23.40 29.60 27.20 32.70 29.80 39.70 34.80 45.50 45.50 49.60 49.60 50.80 50.80 55.10 55.10 kw 3.01 3.11 3.22 3.32 3.39 3.55 3.69 3.78 3.81 3.92 Cap. 13.80 12.70 18.10 16.70 22.80 21.00 27.30 25.10 30.40 27.70 37.10 32.50 42.60 42.60 47.30 47.30 48.70 48.70 54.20 54.20 kw 3.05 3.26 3.46 3.65 3.78 4.06 4.30 4.51 4.57 4.82 Cap. 14.50 13.40 18.90 17.40 23.00 21.70 28.10 25.80 31.20 28.40 37.90 33.20 43.60 43.60 48.30 48.30 49.70 49.70 55.30 55.30 kw 3.14 3.32 3.49 3.64 3.75 3.97 4.17 4.33 4.37 4.57 Cap. 15.10 13.90 19.60 18.00 24.30 22.30 28.70 26.30 31.80 29.00 38.60 33.80 44.40 44.40 48.80 48.80 50.00 50.00 54.80 54.80 kw 3.24 3.40 3.55 3.69 3.78 3.97 4.14 4.26 4.29 4.43 Cap. 12.10 11.10 16.70 15.40 21.60 19.90 26.20 24.10 29.60 27.00 36.30 31.80 41.70 41.70 46.30 46.30 47.80 47.80 53.60 53.60 kw 3.19 3.43 3.68 3.90 4.06 4.39 4.66 4.89 4.97 5.26 Cap. 12.80 11.80 17.50 16.10 22.50 26.70 27.10 24.90 30.40 27.70 37.10 32.50 42.70 42.70 47.40 47.40 48.10 48.90 53.90 53.90 kw 3.28 3.50 3.71 3.90 4.03 4.29 4.51 4.70 4.75 4.93 Cap. 13.50 12.40 18.20 16.70 23.20 21.30 27.80 25.50 31.10 28.40 37.80 33.10 43.50 43.50 48.00 48.00 49.50 49.50 54.60 54.60 kw 3.38 3.58 3.78 3.94 4.06 4.28 4.47 4.61 4.66 4.82 Cap. Heating Capacity (1000 Btuh) (includes indoor-fan motor heat) kw Total Power input (includes compressor motor power input, outdoorfan motor input, and indoor-fan motor input) rh Relative Humidity NOTES: 1. indicates integrated ratings. 2. Integrated capacity is maximum (instantaneous) capacity less the effect of frost on the outdoor coil and the heat required to defrost it. 14

INSTANTANEOUS AND INTEGRATED HEATING RATINGS (cont) 50LJQ006 (5 Tons) RETURN AIR (F db) 55 70 80 CFM (Std Air) 1500 2000 2500 1500 2000 2500 1500 2000 2500 TEMPERATURE AIR ENTERING OUTDOOR COIL (F db at 70% rh) -20-10 0 10 17 30 40 47 50 60 Cap. 20.10 18.50 24.90 23.00 30.30 27.80 35.10 32.20 38.70 35.20 47.40 41.50 54.60 54.60 61.10 61.10 62.90 62.90 71.40 71.40 kw 3.57 3.74 3.92 4.08 4.21 4.50 4.76 5.01 5.09 5.40 Cap. 21.10 19.40 25.90 23.90 31.20 28.70 36.00 33.10 39.70 36.20 48.60 42.60 56.00 56.00 62.20 62.20 64.10 64.10 71.90 71.90 kw 3.71 3.86 4.00 4.14 4.24 4.48 4.71 4.88 4.94 5.18 Cap. 21.90 20.20 26.70 24.60 32.00 29.50 36.90 33.90 40.60 37.00 49.50 43.40 56.90 56.90 62.10 62.10 63.60 63.60 69.50 69.50 kw 3.88 4.01 4.14 4.25 4.34 4.56 4.76 4.87 4.92 5.06 Cap. 18.00 16.50 23.20 21.40 28.80 26.50 34.00 31.20 37.50 34.20 45.80 40.10 52.70 52.70 59.00 59.00 60.70 60.70 70.00 70.00 kw 3.86 4.10 4.34 4.56 4.71 5.04 5.33 5.60 5.69 6.11 Cap. 19.10 17.60 24.30 22.40 29.90 27.50 35.00 32.10 38.60 35.20 47.10 41.20 54.20 54.20 60.70 60.70 62.50 62.50 70.80 70.80 kw 4.01 4.22 4.41 4.59 4.72 4.99 5.23 5.46 5.54 5.80 Cap. 19.90 18.30 25.20 23.10 30.80 28.30 35.80 32.90 39.40 36.00 48.10 42.10 55.20 55.20 61.70 61.70 63.20 63.20 70.40 70.40 kw 4.17 4.36 4.54 4.69 4.80 5.04 5.26 5.45 5.49 5.70 Cap. 16.10 14.80 21.70 20.00 27.50 25.30 33.00 30.30 36.70 33.50 44.80 39.30 51.60 51.60 57.70 57.70 59.30 59.30 68.50 68.50 kw 4.03 4.33 4.62 4.89 5.07 5.44 5.76 6.04 6.14 6.63 Cap. 17.20 15.90 22.90 21.00 28.70 26.40 34.10 31.30 37.80 34.50 46.10 40.40 53.00 53.00 59.30 59.30 61.00 61.00 70.10 70.10 kw 4.19 4.45 4.70 4.92 5.06 5.37 5.63 5.87 5.95 6.29 Cap. 18.20 16.70 23.80 21.90 29.70 27.30 35.00 32.10 38.70 35.30 47.10 41.20 54.10 54.10 60.50 60.50 62.20 62.20 70.20 70.20 kw 4.35 4.60 4.82 5.01 5.14 5.40 5.64 5.86 5.92 6.16 50LJQ008 (7 1 2 Tons) RETURN AIR (F db) 55 70 80 CFM (Std Air) 2250 3000 3750 2250 3000 3750 2250 3000 3750 TEMPERATURE AIR ENTERING OUTDOOR COIL (F db at 70% rh) -20-10 0 10 17 30 40 47 50 60 Cap. 23.90 22.00 33.00 30.40 42.10 38.70 51.90 47.50 58.80 53.60 74.30 65.10 88.40 84.60 98.30 98.30 103.00 103.00 118.50 118.50 kw 4.75 5.23 5.70 6.25 6.62 7.48 8.26 8.82 9.09 10.00 Cap. 25.60 23.60 35.00 32.20 44.30 40.70 54.40 49.70 61.40 56.00 77.80 68.10 92.70 88.70 103.10 103.10 108.10 108.10 124.50 124.50 kw 5.05 5.51 5.97 6.47 6.82 7.60 8.31 8.80 9.04 9.84 Cap. 27.10 25.00 36.60 33.70 46.10 42.40 56.40 51.60 63.50 57.90 80.30 70.40 95.70 91.60 106.50 106.50 111.50 111.50 128.30 128.30 kw 5.36 5.81 6.26 6.73 7.07 7.79 8.46 8.92 9.14 9.90 Cap. 18.70 17.21 28.00 25.80 37.20 34.20 47.10 43.10 54.10 49.30 69.00 60.40 82.40 78.90 91.80 91.80 96.10 96.10 110.60 110.60 kw 4.88 5.41 5.94 6.53 6.95 7.90 8.76 9.36 9.65 10.62 Cap. 20.40 18.73 29.90 27.40 39.40 36.30 49.60 45.30 56.80 51.80 72.20 63.30 86.30 82.70 96.20 96.20 100.90 100.90 116.40 116.40 kw 5.17 5.68 6.20 6.75 7.15 8.03 8.80 9.34 9.60 10.46 Cap. 21.80 20.03 31.50 29.00 41.10 37.90 51.40 47.10 58.70 53.60 74.60 65.40 89.20 85.40 99.40 99.40 104.20 104.20 120.00 120.00 kw 5.49 5.98 6.47 7.01 7.39 8.22 8.95 9.45 9.69 10.49 Cap. 14.63 13.46 24.20 22.20 33.70 31.00 43.90 40.10 50.90 46.40 65.60 57.50 78.20 74.90 87.10 87.10 91.10 91.10 104.50 104.50 kw 4.95 5.53 6.10 6.74 7.18 8.17 9.06 9.68 9.97 10.94 Cap. 16.18 14.89 26.00 24.00 35.80 33.00 46.30 42.30 53.50 48.70 68.60 60.10 81.90 78.40 91.20 91.20 95.50 95.50 109.60 109.60 kw 5.25 5.80 6.36 6.95 7.38 8.29 9.11 9.67 9.93 10.78 Cap. 17.55 16.14 27.60 25.30 37.50 34.50 48.10 43.90 55.50 50.60 70.90 62.00 84.40 80.80 94.00 94.00 98.30 98.30 112.80 112.80 kw 5.55 6.09 6.62 7.21 7.61 8.49 9.23 9.76 10.00 10.78 Cap. Heating Capacity (1000 Btuh) (includes indoor-fan motor heat) kw Total Power input (includes compressor motor power input, outdoor-fan motor input, and indoor-fan motor input) rh Relative Humidity NOTES: 1. indicates integrated ratings. 2. Integrated capacity is maximum (instantaneous) capacity less the effect of frost on the outdoor coil and the heat required to defrost it. 15

Performance data (cont) 50LJQ012 (10 Tons) RETURN AIR (F db) 55 70 80 CFM (Std Air) 3000 4000 5000 3000 4000 5000 3000 4000 5000 INSTANTANEOUS AND INTEGRATED HEATING RATINGS (cont) TEMPERATURE AIR ENTERING OUTDOOR COIL (F db at 70% rh) -20-10 0 10 17 30 40 47 50 60 Cap. 32.40 29.80 42.70 39.30 53.00 48.80 64.10 58.70 71.90 65.50 90,10 78.90 106.80 102.20 118.50 118.50 123.50 123.50 140.10 140.10 kw 5.83 6.39 6.95 7.51 7.88 8.72 9.50 10.04 10.28 11.05 Cap. 34.40 31.70 44.90 41.30 55.30 50.90 66.70 60.90 74.50 68.00 93.20 81.70 109.30 104.60 120.50 120.50 124.20 124.20 136.50 136.50 kw 6.23 6.77 7.31 7.80 8.15 8.92 9.58 10.04 10.20 10.74 Cap. 36.20 33.30 46.70 43.00 57.20 52.70 68.60 62.80 76.70 69.90 95.30 83.50 109.00 104.10 118.60 118.60 121.40 121.40 131.10 131.10 kw 6.64 7.16 7.67 8.14 8.48 9.23 9.76 10.14 10.26 10.66 Cap. 26.20 24.20 37.30 34.40 48.40 44.60 59.40 54.30 67.00 61.10 84.50 74.00 100.60 96.30 111.90 111.90 117.30 117.30 135.30 135.30 kw 5.80 6.47 7.14 7.81 8.27 9.24 10.10 10.71 11.00 11.98 Cap. 28.50 26.30 39.60 36.50 50.80 46.70 61.90 56.70 69.70 63.60 87.90 77.00 104.40 99.90 116.00 116.00 120.70 120.70 136.80 136.80 kw 6.20 6.85 7.51 8.13 8.56 9.45 10.26 10.82 11.05 11.81 Cap. 30.30 28.00 41.60 38.20 52.80 48.50 64.00 58.60 71.90 65.60 90.20 79.10 106.20 101.60 117.40 117.40 120.90 120.90 133.00 133.00 kw 6.61 7.25 7.87 8.47 8.88 9.73 10.46 10.97 11.14 11.70 Cap. 21.30 19.65 32.90 30.30 44.40 40.90 55.70 50.90 63.50 57.90 80.70 70.70 96.30 92.20 107.20 107.20 112.60 112.60 130.40 130.40 kw 5.72 6.46 7.21 7.94 8.45 9.54 10.47 11.13 11.45 12.52 Cap. 23.40 21.60 35.20 32.40 46.90 43.20 58.40 53.30 66.20 60.40 84.00 73.60 100.20 95.90 111.50 111.50 116.70 116.70 133.80 133.80 kw 6.13 6.85 7.57 8.27 8.76 9.76 10.63 11.23 11.50 12.39 Cap. 25.20 23.20 37.10 34.20 49.10 45.20 60.50 55.30 68.50 62.50 86.50 75.70 102.80 98.40 114.20 114.20 118.60 118.60 133.10 133.10 kw 6.52 7.24 7.95 8.63 9.10 10.05 10.88 11.47 11.69 12.39 Cap. Heating Capacity (1000 Btuh) (includes indoor-fan motor heat) kw Total Power input (includes compressor motor power input, outdoorfan motor input and indoor-fan motor input) rh Relative Humidity NOTES: 1. indicates integrated ratings. 2. Integrated capacity is maximum (instantaneous) capacity less the effect of frost on the outdoor coil and the heat required to defrost it. 16

FAN PERFORMANCE VERTICAL DISCHARGE UNITS 50LJQ004 (3 Tons) STANDARD MOTOR (Direct Drive) LOW SPEED AIRFLOW (Cfm) HIGH SPEED 208 230,460,575 208 230,460,575 ESP Bhp ESP Bhp ESP Bhp ESP Bhp 900.63.17.65.19.66.21.68.25 1000.61.20.63.22.65.23.66.27 1100.58.21.60.24.62.25.63.29 1200.54.23.56.25.57.27.58.31 1300.46.24.49.26.51.29.52.32 1400.40.26.42.28.45.30.46.33 1500.34.27.37.33.37.31.38.34 Bhp Brake Horsepower ESP External Static Pressure NOTE: Values include losses for filters, unit casing, and wet coils. 50LJQ004 (3 Tons) ALTERNATE MOTOR (Direct Drive) LOW SPEED AIRFLOW (Cfm) HIGH SPEED 208 230, 460, 575 208 230, 460, 575 ESP Bhp ESP Bhp ESP Bhp ESP Bhp 900.97.37.99.38 1.08.47 1.16.59 1000.91.39.94.41 1.02.50 1.11.60 1100.84.41.87.45.96.53 1.04.63 1200.77.44.81.48.89.56.98.65 1300.70.48.75.50.82.60.91.68 1400.62.50.68.54.75.63.85.69 1500.54.53.61.58.67.65.78.72 Bhp Brake Horsepower ESP External Static Pressure NOTE: Values include losses for filters, unit casing, and wet coils. 50LJQ005 (4 Tons) STANDARD MOTOR (Direct Drive) LOW SPEED HIGH SPEED AIRFLOW (Cfm) 208 230, 460, 575 208 230, 460, 575 ESP Bhp ESP Bhp ESP Bhp ESP Bhp 1200.77.44.81.48.89.56.98.65 1300.70.48.75.50.82.60.91.68 1400.62.50.68.54.75.63.85.69 1500.54.53.61.58.67.65.78.72 1600.45.57.52.60.59.68.70.74 1700.36.58.44.63.50.69.61.76 1800.26.61.35.65.42.71.54.78 1900.18.63.27.68.34.73.46.79 2000.08.64.19.69.26.74.39.81 Bhp Brake Horsepower ESP External Static Pressure NOTE: Values include losses for filters, unit casing, and wet coils. 17

Performance data (cont) 50LJQ005 (4 Tons) ALTERNATE MOTOR (Belt Drive) AIRFLOW (Cfm) FAN PERFORMANCE VERTICAL DISCHARGE UNITS (cont) EXTERNAL STATIC PRESSURE (in. wg) 0.1 0.2 0.3 0.4 0.6 0.7 0.8 1.0 1.2 Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp 1200 701 0.22 758 0.28 834 0.35 914 0.42 1012 0.56 1056 0.59 1098 0.62 1180 0.68 1255 0.76 1300 747 0.27 800 0.34 865 0.41 945 0.52 1050 0.62 1090 0.63 1132 0.68 1212 0.72 1280 0.78 1400 792 0.33 847 0.40 901 0.47 960 0.56 1091 0.67 1130 0.70 1165 0.72 1242 0.82 1310 0.89 1500 836 0.39 897 0.46 947 0.55 1000 0.61 1132 0.72 1170 0.75 1205 0.82 1275 0.91 1330 0.98 1600 881 0.47 945 0.54 983 0.62 1065 0.67 1172 0.77 1207 0.86 1238 0.92 1310 1.05 1350 1.08 1700 925 0.55 981 0.61 1020 0.68 1103 0.72 1202 0.88 1243 0.98 1270 1.05 1350 1.16 1372 1.19 1800 964 0.63 1024 0.72 1084 0.75 1140 0.82 1230 0.97 1268 1.07 1300 1.15 1390 1.29 1450 1.58 1900 1011 0.73 1068 0.79 1120 0.82 1172 0.91 1256 1.18 1310 1.13 1329 1.27 1440 1.47 1505 1.60 2000 1058 0.81 1100 0.85 1160 0.90 1237 1.20 1286 1.25 1320 1.31 1400 1.38 1448 1.57 1550 1.65 Bhp Brake Horsepower NOTES: 1. Boldface indicates field-supplied drive required. (See Note 5.) 2. indicates field-supplied motor and drive required. 3. Maximum usable bhp is 1.2. Extensive motor and drive testing on these units ensures that the full horsepower range of the motor can be utilized with confidence. Using your fan motors up to the horsepower rating shown will not result in nuisance tripping or premature motor failure. Unit warranty will not be affected. 4. Values include losses for filters, unit casing, and wet coils. 5. Standard motor drive range: 970 to 1310 rpm. All other rpms require field-supplied drive. 6. Use of field-supplied motor may affect sizing. Contact your Carrier distributor to verify. 50LJQ006 (5 Tons) STANDARD MOTOR (Belt Drive) AIRFLOW (Cfm) EXTERNAL STATIC PRESSURE (in. wg) 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp 1500 680 0.30 744 0.36 854 0.48 953 0.62 1038 0.77 1114 0.92 1194 1.08 1304 1.29 1600 717 0.36 778 0.42 885 0.55 980 0.69 1065 0.85 1140 1.00 1210 1.16 1289 1.34 1396 1.57 1700 754 0.42 812 0.49 916 0.62 1007 0.77 1092 0.93 1167 1.09 1235 1.26 1302 1.43 1378 1.63 1800 792 0.49 847 0.56 948 0.71 1035 0.85 1118 1.02 1194 1.19 1261 1.37 1324 1.55 1388 1.73 1900 830 0.56 882 0.64 980 0.79 1065 0.95 1145 1.12 1220 1.30 1288 1.48 1350 1.67 1410 1.86 2000 868 0.65 918 0.73 1012 0.89 1096 1.06 1173 1.23 1247 1.41 1315 1.60 1377 1.80 1435 1.99 2100 907 0.74 955 0.83 1045 1.00 1127 1.17 1201 1.34 1274 1.53 1342 1.73 1404 1.93 1462 2.14 2200 945 0.85 991 0.93 1079 1.11 1159 1.29 1231 1.47 1301 1.66 1368 1.87 1431 2.08 1489 2.29 2300 984 0.96 1028 1.05 1113 1.23 1191 1.42 1263 1.61 1329 1.80 1395 2.01 1458 2.23 2400 1023 1.08 1065 1.18 1147 1.37 1224 1.56 1294 1.76 1389 2.12 1423 2.17 1485 2.39 2500 1062 1.22 1103 1.31 1182 1.51 1257 1.72 1326 1.92 1421 2.30 1451 2.34 Bhp Brake Horsepower NOTES: 1. Boldface indicates field-supplied drive required. (See Note 6.) 2. indicates field-supplied motor and drive required. 3. Maximum usable bhp is 1.7. Extensive motor and electrical testing on these units ensures that the full horsepower range of the motor can be utilized with confidence. Using your fan motors up to the horsepower ratings shown will not result in nuisance tripping or premature motor failure. Unit warranty will not be affected. 4. Values include losses for filters, unit casing, and wet coils. 5. Use of a field-supplied motor may affect wire sizing. Contact your Carrier representative to verify. 6. Motor drive range is 875 to 1190 rpm. All other rpms require field-supplied drive. 18

50LJQ008 (7 1 2 Tons) STANDARD MOTOR (Belt Drive) AIRFLOW (Cfm) EXTERNAL STATIC PRESSURE (in.wg) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp 2200 503 0.50 585 0.71 653 0.92 716 1.15 772 1.38 824 1.63 884 1.95 934 2.30 916 2.64 1019 3.09 2250 511 0.52 592 0.74 659 0.95 722 1.19 778 1.43 829 1.68 884 1.97 937 2.33 947 2.66 1022 3.10 2300 518 0.55 599 0.77 665 0.98 727 1.22 783 1.47 834 1.72 885 2.00 939 2.36 979 2.69 1025 3.12 2400 534 0.61 613 0.84 677 1.06 738 1.30 794 1.55 844 1.81 892 2.08 944 2.40 987 2.76 1039 3.20 2500 549 0.67 627 0.90 690 1.14 750 1.38 805 1.64 855 1.91 902 2.18 949 2.48 1002 2.84 1041 3.25 2550 557 0.71 633 0.94 697 1.18 756 1.42 811 1.69 861 1.96 908 2.24 953 2.53 1003 2.87 1045 3.28 2600 565 0.74 639 0.97 703 1.22 761 1.46 816 1.74 866 2.01 913 2.29 957 2.58 1004 2.91 1050 3.31 2700 581 0.81 652 1.04 717 1.31 773 1.55 827 1.83 878 2.12 924 2.41 967 2.70 1010 3.01 1056 3.37 2800 597 0.89 665 1.12 731 1.40 786 1.66 839 1.93 889 2.23 935 2.52 978 2.62 1019 3.13 1061 3.47 2900 613 0.97 679 1.20 745 1.50 799 1.76 850 2.04 900 2.34 946 2.65 989 2.96 1030 3.27 3000 629 1.06 694 1.29 759 1.59 812 1.88 862 2.15 911 2.46 957 2.78 1000 3.09 1040 3.41 3100 646 1.15 709 1.39 772 1.70 825 1.99 875 2.28 923 2.58 968 2.91 1011 3.24 3200 662 1.25 724 1.50 785 1.80 840 2.11 887 2.41 934 2.71 980 3.04 1022 3.38 3300 679 1.35 740 1.61 798 1.91 854 2.24 900 2.54 946 2.85 991 3.18 3400 696 1.46 756 1.73 811 2.02 868 2.37 914 2.69 959 3.00 1003 3.32 3500 712 1.57 771 1.85 824 2.14 881 2.50 928 2.84 971 3.16 1014 3.48 3600 729 1.69 787 1.98 839 2.27 894 2.64 942 2.99 984 3.32 3700 746 1.82 803 2.12 854 2.42 907 2.78 956 3.15 997 3.49 3750 755 1.89 811 2.20 862 2.49 914 2.85 963 3.23 3800 763 1.95 819 2.27 869 2.56 920 2.92 970 3.31 3900 780 2.09 835 2.42 884 2.72 933 3.07 983 3.48 4000 796 2.23 851 2.56 900 2.89 946 3.23 4100 813 2.39 867 2.74 915 3.06 960 3.40 4200 830 2.55 883 2.91 931 3.24 4250 839 2.63 892 3.00 939 3.34 4300 847 2.71 900 3.09 947 3.43 Bhp Brake Horsepower NOTES: 1. indicates factory-supplied alternate drive required. (See Note 7.) 2. Boldface indicates field-supplied drive required. (See Note 7.) 3. indicates field-supplied motor and drive required. 4. Maximum usable bhp is 2.4. Extensive motor and electrical testing on these units ensures that the full horsepower range of the motor can be utilized with confidence. Using your fan motors up to the horsepower ratings shown will not result in nuisance tripping or premature motor failure. Unit warranty will not be affected. 5. Use of a field-supplied motor may affect wire sizing. Contact your Carrier representative to verify. 6. Values include losses for filters, unit casing, and wet coils. 7. Standard motor drive range: 590 to 835 rpm. Alternate drive range: 685 to 935 rpm. All other rpms require field-supplied drive. 50LJQ012 (10 Tons) STANDARD AND ALTERNATE MOTOR (Belt Drive) AIRFLOW (Cfm) EXTERNAL STATIC PRESSURE (in. wg) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp Rpm Bhp 3000 532 0.64 605 0.81 670 0.97 725 1.12 778 1.28 825 1.43 874 1.60 926 1.82 974 2.11 1012 2.36 3100 544 0.70 616 0.86 680 1.03 735 1.20 787 1.36 835 1.52 880 1.68 933 1.87 983 2.16 1017 2.41 3200 557 0.75 628 0.93 690 1.10 746 1.28 796 1.44 844 1.61 888 1.77 934 1.94 988 2.18 1025 2.47 3300 570 0.81 639 0.99 700 1.18 757 1.36 805 1.52 854 1.70 897 1.86 940 2.03 989 2.24 1032 2.53 3400 583 0.88 651 1.06 711 1.25 767 1.44 815 1.61 863 1.79 907 1.97 947 2.14 991 2.32 1038 2.57 3500 596 0.94 663 1.14 721 1.33 777 1.52 826 1.71 871 1.88 916 2.07 956 2.25 997 2.43 1043 2.64 3600 609 1.01 674 1.22 732 1.42 787 1.61 836 1.80 880 1.98 926 2.18 966 2.36 1004 2.54 1045 2.74 3700 622 1.09 686 1.30 744 1.50 797 1.70 847 1.91 890 2.09 934 2.28 976 2.48 1013 2.66 1051 2.85 3800 635 1.16 698 1.39 755 1.59 808 1.80 857 2.01 901 2.20 943 2.39 985 2.60 1023 2.79 1059 2.98 3900 649 1.25 710 1.48 767 1.68 818 1.90 867 2.11 912 2.32 952 2.51 994 2.72 1032 2.92 1068 3.12 4000 662 1.33 722 1.57 778 1.78 829 2.01 878 2.22 922 2.44 962 2.63 1003 2.84 1042 3.06 1078 3.26 4100 675 1.42 734 1.67 790 1.89 839 2.12 888 2.33 933 2.56 973 2.77 1011 2.97 1051 3.20 1087 3.41 4200 689 1.52 746 1.77 801 1.99 851 2.23 898 2.45 943 2.69 983 2.91 1021 3.11 1060 3.34 4300 702 1.61 759 1.88 813 2.11 862 2.34 908 2.58 953 2.81 994 3.05 1031 3.25 1068 3.48 4400 715 1.72 772 1.99 825 2.22 873 2.46 919 2.71 963 2.94 1004 3.19 1042 3.41 4500 729 1.83 785 2.10 837 2.35 885 2.59 929 2.85 973 3.08 1015 3.33 4600 742 1.94 797 2.22 848 2.48 896 2.72 940 2.98 984 3.22 1025 3.48 4700 756 2.06 810 2.34 860 2.61 908 2.86 951 3.12 994 3.38 4800 770 2.18 823 2.46 872 2.75 919 3.00 963 3.27 4900 783 2.31 836 2.60 884 2.89 931 3.14 974 3.41 5000 797 2.44 849 2.73 897 3.04 943 3.30 Bhp Brake Horsepower NOTES: 1. indicates field-supplied motor and drive required. 2. Boldface indicates field-supplied drive required. (See Note 7.) 3. indicates alternate motor and drive required. (See Note 7.) 4. Maximum usable bhp is 2.4 with standard motor; 2.9 with alternate motor. Extensive motor and electrical testing on these units ensures that the full horsepower range of the motor can be utilized with confidence. Using your fan motors up to the horsepower ratings shown will not result in nuisance tripping or premature motor failure. Unit warranty will not be affected. 5. Use of a field-supplied motor may affect wire sizing. Contact your Carrier representative to verify. 6. Values include losses for filters, unit casing, and wet coils. 7. Standard motor drive range: 685 to 935 rpm. Alternate motor drive range: 835 to 1085 rpm. All other rpms require field-supplied drive. 19

Performance data (cont) FAN PERFORMANCE HORIZONTAL DISCHARGE UNITS 50LJQ004 (3 Tons) STANDARD MOTOR (Direct Drive) LOW SPEED AIRFLOW (Cfm) HIGH SPEED 208 230,460,575 208 230,460,575 ESP Bhp ESP Bhp ESP Bhp ESP Bhp 900.71.17.73.19.80.21.82.25 1000.67.20.70.22.76.23.78.27 1100.61.21.64.24.70.25.72.29 1200.55.23.58.25.65.27.66.31 1300.47.24.50.26.57.29.58.32 1400.38.26.41.28.49.30.50.33 1500.29.27.32.33.40.31.41.34 Bhp Brake Horsepower ESP External Static Pressure NOTE: Values include losses for filters, unit casing, and wet coils. 50LJQ004 (3 Tons) ALTERNATE MOTOR (Direct Drive) LOW SPEED AIRFLOW (Cfm) HIGH SPEED 208 230,460,575 208 230,460,575 ESP Bhp ESP Bhp ESP Bhp ESP Bhp 900 1.15.36 1.16.39 1.27.45 1.35.59 1000 1.09.38 1.12.41 1.22.48 1.29.61 1100 1.02.41 1.06.44 1.15.51 1.24.64 1200.96.44 1.01.48 1.09.56 1.18.65 1300.91.48.96.50 1.04.60 1.13.68 1400.84.50.90.54.96.63 1.06.69 1500.76.53.84.58.90.65 1.01.72 Bhp Brake Horsepower ESP External Static Pressure NOTE: Values include losses for filters, unit casing, and wet coils. 50LJQ005 (4 Tons) STANDARD MOTOR (Direct Drive) LOW SPEED HIGH SPEED AIRFLOW (Cfm) 208 230,460,575 208 230,460,575 ESP Bhp ESP Bhp ESP Bhp ESP Bhp 1200.96.44 1.01.48 1.09.56 1.18.65 1300.91.48.96.50 1.04.60 1.13.68 1400.84.50.90.54.96.63 1.06.69 1500.76.53.84.58.90.65 1.01.72 1600.69.57.76.60.83.68.94.74 1700.60.58.67.63.76.69.86.76 1800.51.61.59.65.68.71.78.78 1900.42.63.48.68.59.73.70.79 2000.30.64.36.69.50.74.61.81 Bhp Brake Horsepower ESP External Static Pressure NOTE: Values include losses for filters, unit casing, and wet coils. 20