design consulting distribution Rotary Screw Compressors 2013 range
Rotary Screw Compressors 2013 Rotary Screw Compressors Contents Why rotary Screw? Rotary screw compressors have the following benefits over piston compressors: Higher efficiency, up to 33% more air output Lower running cost, up to 25% cost reduction Up to 100% duty cycle, for continuous running Longer life, up to 4 time service life Low Noise, - 72 dba Reliability, Less service required 65-75% Efficiency cost of ownership Why Rotary Screw? Rotary Screw Operation nuetech Rotor Screw Series Overview Stand Alone Machines Fully Machines Contact 90-95% cost of ownership running cost time Intermittent - 50% duty cyce Continuous - 100% Up to 20,000 hours running life Up to 80,000 hours 85-95 dba Service Every 500 hours 2 time noise reliability - 85 dba Service Every 2000 hours up to up to more efficient cost reduction 2x 4x 2 3 4 6 7 8 30% 25% longer duty cycle service life info@pneutechproducts.com 3
Stop/start or continuous run mode Fan cooled oil radiator for lower operating temperature Logika rogrammable Controller high temperature shut down emergency shut down rotation monitor hour meter service schedule digital read out Fan cooled air after cooler for less water condensation Spin on oil separator filters for fast and easy servicing nuetech Rotor Screw Series Two stage oil filtration for maximum oil life Star Delta Starter - auto on/off run mode The neutech Rotor Screw compressor is directly coupled to the electric motor, which gives an efficient 100% power transfer for optimum performances and low running costs. With fewer transmission parts, maintenance costs are also reduced. The large air end revolves at a slow 2900rpm which ensures longevity and extra quiet operation (dba). {This makes these units ideally suited to a wide range of automotive, engineering, food and manufacturing industries for light or heavy duty} Unlike other screw compressors, Rotor Screws have the unique ability to run intermittently on a stop/start cycle, or continuously on a 100% duty cycle. Rotary Screw Operation Strong compact compressor frame for rigidity Oversized slow revving air end for longevity 4 Oil separator tank for very low oil carry over (less that 3ppm) Oil drain tubes for easy access Direct driven motor/ screw no V-belts and high energy transfer 5
Stand Alone Fully The Rotor Screw is mounted inside a sturdy tubular frame for rigidity and long term durability. This also allows for maximum air circulation to give better cooling and with the one piece enclosure, provides fast and east access for high speed and low cost maintenance. The neutech and Rotor Screw series feature the complete compressed air package of screw compressor, air receiver and refrigerated dryer, for an air supply of the highest quality. With all the features of the Rotor Stand alone series, the Compressors incorporate a refrigerated dryer complete with an adjustable solenoid drain to remove condensate in every situation and prevent any icing. Mounted on a fully certified air receiver, the neutech integrated rotor screw compressor is ideally suited to spray and finishing applications where the air supply must be clean and dry. nuetech Rotor Screw Series RS750 Rotor Screw 750 nuetech Rotor Screw Series RS1000 RS750 Rotor Screw 1000 10hp Motor 35cfm FAD 4kg 9x710x500 hp Motor 26cfm FAD 2kg 9x710x500 RS00 RS2000 hp Motor 59cfm FAD 180kg 0x900x1080 20hp Motor 72cfm FAD 190kg 0x900x1080 Rotor Screw 00 RS1000 Rotor Screw 750 hp Motor 26cfm FAD L receiver Rotor Screw 2000 Rotor Screw 1000 10hp Motor 35cfm FAD L receiver RS 750 RS 1000 RS00 RS2000 hp Motor 59cfm FAD L receiver 20hp Motor 72cfm FAD L receiver Rotor Screw 00 6 KW Motor - RS750 5.5 10 143 550 RS1000 10.0 13 186 1200 RS00 11 8.5 125 1650 RS2000 20 8.5 125 2000 H Bar ressure SI Free Air Deivery l/m CFM Tank Litres R S 200 Sound (dba) 26 9x 710x500 2 RS750 5.5 10 143 550 26 00x 1350x 500 2 36.0 9x 710x 500 4 RS1000 10.0 13 186 1200 36.0 00x 1350x 500 248 59 0x 900x 1080 180 RS00 11 8.5 125 1650 59 1600x 550x 1450 72 0x 900x 1080 190 RS2000 20 8.5 125 2000 72 1600x 550x 1450 280 H Bar ressure SI Weight (KG) KW Motor - Dimensions Dryer MODEL NUMBER Rotor Screw 2000 RS 00 MODEL NUMBER Free Air Deivery l/m CFM Tank Litres Dryer Dimensions Weight (KG) 0 Sound (dba) 7
design consulting distribution CHICAGO 3500 Martens St. Franklin ark, IL 60131 USA Headquarters GLOUCESTER Unit 20 Spinnaker Road Gloucester GL2 5FD UK ENRITH 22-24 Altair lace enrith Australia WELLINGTON O Box 50 336 orirua Wellington 5240 New Zealand hone 847.1.2655 Fax 847-928-2040 us.support@ hone +44 1452 525757 Fax +44 1452 300312 uk.support@ hone +61 2 47 311133 Fax + 61 2 4728 5327 au.support@ hone +64 3 774 Fax +64 3 7 71 nz.support@