Upflow/Downflow A-Coil Specifications

June 2013 Upflow/Downflow A-Coil Specifications ADP Model # Width Depth Height Pallet Qty. Coil Weight (lbs) C36A142(*)126 14.25" 21" 16.5" 12 38 1200 386.36 C36A175(*)126 17.50" 21" 16.5" 8 40 1200 386.34 C36A142(*)536 14.25" 21" 31.5" 4 60 1200 180.20 C48A175(*)156 17.50" 21" 21.5" 4 48 1600 360.29 C48A210(*)156 21.00" 21" 21.5" 4 50 1600 360.27 C60A210(*)366 21.00" 21" 24.5" 4 57 2000 409.42 C60A210(*)526 21.00" 21" 31.5" 4 77 2000 300.32 (*) - "C" represents a copper slab. "L" represents an aluminum slab. (1) Face velocity in Bold above 350 ft/min. is not recommended for downflow applications due to potential water blow-off. CFM (1) Face Vel. (fpm) Wet Air Pressure Drop (in WC) High efficiency lanced fin design. No-hassle 5 year warranty, with an additional 5 years upon registration at www.adpwarranty.com R-410A TXVs installed. Threaded installation. All coils have durable packaging with bar coded labels on the box. Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air. Liquid line refrigerant connections are 3/8" ODF. Suction line refrigerant connections are 3/4" ODF (A-Coil 18-36 size models) or 7/8" ODF (A-Coil 42-60 size models). Copper refrigerant connections for easy brazing on both copper and aluminum slab models. Cased coils have heavy gauge painted cabinets fully lined with 5/8" foil faced insulation. Corrosion resistant coil header plates. All A-Coils are upflow or downflow capable. Cabinet insulation hold down tabs for easy drain pan removal. Bottom Opening Width is cabinet width less 1" Interlocking doors reduce air leakage and allow for easy access. Bottom opening Depth is cabinet depth less.5" Enhanced refrigerant pipe grommets: secure, tight, and easy to install. Top Opening Width is cabinet Width less 1.5" Intertek lab tested 1% or less cabinet air leakage for better efficiency. Top opening Depth is cabinet depth less 1.5" Foam drain seal for reduced air leakage. Cabinet Height doesn't include 3/4" duct flange. Non-captive refrigerant lines with long stubs make for easy installation. Dual 3/4" FPT condensate drains on front-left and front-right side of drain pans. UV resistant drain pans are molded of high temperature (450 deg. F) engineered polymer. Microban antimicrobial additive to inhibit the growth of mold and mildew in the drain pan. HydroTEC low water retention drain pan.

Horizontal Coil Specifications June 2013 ADP Model # Width [A] Depth [B] Height [C] C36H175(*)256 26.50" 21" 17.50" 4 47 1200 300.21 C36H142(*)426 26.50" 21" 14.25" 8 47 1200 342.28 C36H142(*)446 26.50" 21" 14.25" 6 52 1200 277.20 C36H175(*)456 26.50" 21" 17.50" 6 66 1200 257.27 C48H210(*)286 26.50" 21" 21.00" 6 54 1600 274.23 C48H175(*)366 26.50" 21" 17.50" 4 49 1600 343.33 C60H210(*)166 26.50" 21" 21.00" 6 62 2000 400.43 C60H210(*)196 26.50" 21" 21.00" 6 77 2000 343.48 C60H210(*)306 36.50" 21" 21.00" 6 90 2000 240.29 C60H245(*)566 36.50" 21" 24.50" 2 94 2000 218.27 (*) - "D" represents a copper slab. "P" represents an aluminum slab. ^For wet coil conversion at standard ARI conditions, use 1.3 multiplier. Pallet Qty. Coil Weight (lbs) CFM (1) Face Vel. (fpm) Dry Air Pressure Drop (in WC) Cabinet Height Supply opening (Height x Depth) Return opening (Height x Depth) 14.25" 17.5" 21" 24.5" 12.75" x 19.75" 16" x 19.5" 19.5" x 19.5" 23" x 19.5" 13.25"x 20" 16.5" x 20" 20" x 20" 23.5" x 20" Short cabinet with easy access. High efficiency lanced fin design. R-410A threaded TXV installed. Copper refrigerant connections for easy brazing on both copper and aluminum slab models. Dual 3/4" FPT condensate drains on front and back of coil allows flexibility of placement to accommodate left or right airflow furnaces. Easy to remove access panel with only 4 screws. Non-captive panels allow access to inside of cabinet without the need to cut refrigerant lines. Refrigerant connections on top of coil. Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air. Copper distributor tube assembly provides brass to brass threads for trouble-free service of TXV. Heavy gauge painted cabinets fully lined with 5/8" foil faced insulation. All coils are foam packed and include bar coding on label. Easy to use filler strip, for use if coil dimensions are larger than furnace. Dedicated cutouts for condensate drains reduce air leakage. Intertek lab tested 1% or less cabinet air leakage for better efficiency. Microban antimicrobial additive to inhibit the growth of mold and mildew in the drain pan. HydroTEC low water retention drain pan. UV resistant drain pans are molded of high temperature (450 deg. F) engineered polymer. Refrigerant connections are 3/8" ODF liquid and 7/8" ODF suction. Refrigerant connections in center of coil away from airflow path.

June 2013 Plenum Coil Specifications Coil Model Number Height Width Length PL36H142P44635 14.25 21.25 35.00 PL36H175P15635 17.50 21.25 35.00 PL48H175P14635 17.50 21.25 35.00 PL60H210P50635 21.00 21.25 35.00 PL60H210P16635 21.00 21.00 35.00 Drain Connections - 3/4" FPT Condensate drain connections on both the front and back sides of cabinet. Refrigerant Connections Liquid Line - 3/8" ODF Suction Line - 7/8" ODF Cabinet Height Supply opening (Height x Depth) Return opening (Height x Depth) 14.0" 14.25" 14.5" 17.5" 21" 24.5" 25.25" 12.5 x 19.75 12.75 x 19.75 13.0 x 19.75 16.0 x 19.75 19.5 x 19.75 23.0 x 19.75 23.75 x 19.75 13.0 x 20.25 13.25 x 20.25 13.5 x 20.25 16.5 x 20.25 20.0 x 20.25 23.5 x 20.25 24.25 x 20.25 Top Refrigerant connections for installation flexibility UV light knockouts Top panel with only four screws for fast and easy coil access TXV with all threaded connections, no brazing required Light weight aluminum evaporator coils with aluminum header plates Pilot holes for fast secondary drain pan attachment Optional patented float switch is designed to shut off the unit for drain overflow protection Patent pending "V" pan directs water to the front of the pan and away from the furnace flue connection Green/Red connections on each side for easy installation Counter flow and line re-routing not required Healthy Solutions coils feature an available 10-year limited warranty. Simply register online at www.adpwarranty.com

Manufactured Housing Coil Specifications June 2013 Coil Model Nominal Pan Pan Coil Coil Pallet Metering Tonnage Width Depth Height Weight Quantities Device M36E329 1.5-3 18 19.5 15 28 8 TXV M36E339 1.5-3 18 19.5 17 32 8 TXV M36E349 1.5-3.5 18 19.5 23 41 4 TXV M36E359 1.5-3.5 18 19.5 21 39 4 TXV M36E599 1.5-3 18 19.5 29 45 8 TXV M48E669 3. - 4 18 19.5 21 48 4 TXV M60E379 3.5-5 18 19.5 25 45 4 TXV M60E499 3.5-5 18 19.5 25 46 4 TXV M60E599 3.5-5 18 19.5 19 45 8 TXV Features Sloped drain pan for lower water retention. Downflow drip shields are molded into drain pan. Drain pan in 18" and 19 5/8" widths to match all furnace sizes. Piston or TXV models available. Filter-friendly top plate on most models (except 22" & above). Down-turned headers are sized out to easily receive line set. Sweat connections with available quick-connect stub kit. Leak free product - pressure tested twice (500 psi immersion & 300 psi He). High performance fin design. Factory software for TXV failure testing. Includes die-cut foam sheet for sealing, drain ELL, drain hose & clamp. Dedicated upflow/downflow. Protective foam packaging. Dry air holding charge.

C-Series Premier Collection Nomenclature C 24 A 210 C01 6 Premier Distributor Collection Metering Device C-Series* 6 = Non-Bleed A/C TXV (R-410A) 6W = Non-Bleed A/C TXV (R-410A) w/bulb Wrap Nominal MBTUH Capacity 9 = Non-Bleed HP-A/C TXV (R-410A) 9W = Non-Bleed HP-A/C TXV (R-410A) w/bulb Wrap Coil Type/Style (Painted Only) A = Upflow/Downflow Cased A-Coil Slab Number H = Dedicated Horizontal A-Coil Upflow/Downflow Dedicated Horizontal Cased A-Coil A-Coil C = copper D = copper Dimension L = aluminum P = aluminum Upflow/Downflow Cased A-Coil Widths 142 = 14.25" 175 = 17.5" 210 = 21.0" 245 = 24.5" Dedicated Horizontal A-Coil Heights 142 = 14.25" 175 = 17.5" 210 = 21.0" 245 = 24.5" Note: Cased A-Coil widths correspond to Horizontal Coil heights *Cabinet Coordinates w/carrier Color Plenum Coil Nomenclature PL 24 H 145 P03 6 35 Coil Style PL = Plenum Cabinet Length 25" 35" 30" 40" Nominal MBTUH Capacity Metering Device 1 = Piston (R-410A) 2 = Piston (R-22) Coil Type 3 = Bleed A/C TXV (R-22) H = Horizontal A-Coil 4 = Non-Bleed A/C TXV (R-22) 5 = Non-Bleed HP-A/C TXV (R-22) Coil Height 6 = Non-Bleed A/C TXV (R-410A) 14.00" 9 = Non-Bleed HP-A/C TXV (R-410A) 14.25" 14.50" Slab Number 17.50" P = aluminum 21.00" 24.50" 25.25" Cabinet Features Coil Features Painted cabinet for furnace color coordination. Non-captive refrigerant lines for easier service. Scratch resistant cabinet for appearance and rust prevention Patent protected lanced fin for enhanced heat transfer. Enhanced grommets for secure, tight fit and easy Refrigerant connections are 3/8" ODF liquid and 3/4" installation. ODF (18-36 MBTUH) or 7/8" ODF (42-60 MBTUH) suction. Easy Glide one piece panel for full access and easy removal. Durable packaging with a bar coded label on the box. Foil-faced insulation for easy cleaning. Upflow or downflow configuration capable. ETL lab tested 1.25% A-Coil & 1% Horizontal A-Coil air leakage Coils are air pressure tested at 500 PSI, leak tested with Helium, for better efficiency. sealed and then charged with dry air. UV light knock-outs for easy installation. Distributor "bell" joints for enhanced quality. Perfect fit for your furnace to eliminate coil overhang. Drain Pan Features Patent protected HydroTECH TM drain pan with dual 3/4" FPT drains on both sides of cabinet (24.5" wide Cased A-Coils: drains on left side only). UV resistant drain pans are molded of high temperature (450 O F) engineered polymer. Microban antimicrobial additive inhibits the growth of mold and mildew on the drain pan. TX Valve Features Wrapped TXV bulbs for improved temperature control. (Optional) Equalizer line has threaded fitting for easy TXV servicing. TXV location provides better airflow and serviceability.