RC4000 Radiation Detection System LAURUS Systems Inc. 3460 Ellicott Center Drive Suite 101 Ellicott City, MD 21043 Tel. +1 (410) 465-5558 Fax. +1 (410) 465-5257 Web Site: www.laurussystems.com Email: radcomm.sales@laurussystems.com Systems for Rail and Trucks
Radiation Detection Systems: The RC4000 series of detection systems utilize advanced technology we call Energy Specific Alarm Threshold Setting software algorithms in addition to our long-time Total Count and Shape Recognition alarm algorithms. The RC4000 is extremely sensitive to low level radiation emissions from a moving vehicle regardless of the severe changes in background caused by varying scrap densities. Another extremely important issue is for the system to recognize and eliminate the ambient background interference from the ground, brick building and concrete structures. This will significantly improve the system detection capability while virtually stopping false alarms. The RC4000 system technology has been proven to be the best system that is currently available for monitoring any type of scrap metal shipment. The RC4000 systems are installed and monitoring at more than 2,500 Steel Plant and Scrap Processing facilities worldwide with a perfect record when it comes to detecting and protecting these facilities from Radioactive Gauges. Important Notes: All of RadComms series of radiation detection systems is Network-able with full remote access for system monitoring, data viewing and retrieval, servicing and electronic adjustments. Introduction The RC4000 Radiation Detection Systems are finely tuned, revolutionary, instrumentation that has been specifically designed to detect radioactivity contained in a moving vehicle loaded with scrap material. The revolutionary design of the RC4000 incorporates 18 years of engineering design and field application experience, and provides the Metals Industry with the best safety record to-date. The RC4000 incorporates only the best state-of-the-art components and software/hardware technology available in the world. The System Menus are based on a Windows environment, allowing a clear and precise understanding of the RC4000 Operations without having a background in computer science or physics. The software is extremely flexible allowing the user to configure the systems general operation such as; setting passwords, adjusting detector parameters, pinpointing the location of a radioactive source when detected in a vehicle, storing and the retrieval of alarm information. The revolutionary design utilizes high-speed micro-controller/cpld technology in each detector assembly. A multiple of electronic adjustments such as gains, high voltage, noise filters and thresholds can be made via the PC display screen, telephone modem and/or network/ethernet connection. The detector electronics utilizes modular designs allowing fast and easy replacement of parts should a problem arise. The RC4000 PC windows based software is extremely flexible with easy to follow menus in the language of the country where the system is being used. The menus include Graphical Alarm data, total system configuration, manual scan mode, power outage tracking, nonradioactive testing, etc The RC4000 system is by far the most advanced radiation detection system currently available.
Example of RadComm s Energy Specific Alarm Tracking Algorithm on actual Railcar Data Additional Features 1. Speed Measurement: Incoming and Outgoing Speed Selectable Alarm Settings 2. Vehicle Recognition: High and Low Vehicle Recognition with Separate Alarm Threshold Settings 3. Specific Vehicle Alarm Threshold Settings: Large Vehicles and Peddler Traffic Have Specific Automatic Alarm Threshold Settings 4. Vehicle Direction: Must be Displayed and Recorded 5. Speed Alarm: Displayed and Recorded with Distinctive Audio Sound 6. System Language: English and Full Spanish 7. Alarm Threshold Settings: Advanced Characterization Technique for Settings Specific Alarm Thresholds and Noise Cancellation. 8. Specific Alarm Threshold Settings: For Cesium-137, Cobalt-60, Americium-241, Radium- 226 with output display and Recording of each Isotopes Energy Ranges. 9. Email Ready: For Sending Alarm Conditions and Error Messages 10. Network Details: Full Duplex High Speed Network access for Remote Monitoring, Electronic Adjustments and Software Uploads and Downloads. 11. Controller Details: Touch-Screen, Virtual Keyboard, and Main Pentium Processor in one wall mountable Package. 12. Detector Voltage: 24Vdc at 1 amp.
Additional Features (cont.) 13. Detector Volume per Panel: RC4069 with 2,108 cubic inches of High Grade PVT per detector panel. 14. Vehicle Presence Sensors: Thru-Beam Frequency Encoded Infrared. 15: Detector Case: Steel with Light Gauge Aluminium 16. Detector Electronics: Micro-Controller Based with High Speed A/D Components 17. Detector to Controller Wiring: One single Cable (no more than 8 conductors) for communications and one single cable for low voltage DC Power 18, Display of Alarm Thresholds: System must display in Graphical form on a continuous bases the alarm threshold settings according to energy range selected. 19. Temperature Monitor: System must monitor the internal temperature of the detector and display and continuously record in memory Performance Specification of the RC4069 Response: Will detect a 55KBq (1.0 uci 137Cs point source) at 1 meter from the face of the detector (the radiation exposure level is comparable to a 75mmΦ x 150mm 3.7GBq (100mCi) 137 Cs Lead Sealed Source buried in 0.7 g/cm 3 of scrap metal). Detection: The RC4069 Radiation Detection System has been designed to detect very low-level radiation in vehicles carrying all grades of recycled and waste materials. The RC4069 detection system in controlled testing will reliably detect 10 times out of 10 any sealed or unsealed radioactive source such as 137 Cs, 60 Co, 192 Ir, 226 Ra source buried or unburied producing an exposure rate of 0.05mR/hr or 500nSv/hr on a surface area of 12 x 12 or 30 x 30cms on the outside side wall (84 /2.1m) of a vehicle from 39 or 100cms away when the vehicle is traveling at various speeds of up to 3 mph or 5 km/h. RadComm reserves the right to make, within reason, any adjustments to the system to achieve the performance specification. RadComm's overall detection capability will be significantly increased as vehicle speed decreases. SPECIAL NOTE: All of RadComm s radiation detection systems have been field proven to detect the level specified in the Performance Specification outlined in this document. There have been many recorded incidents where radioactive sources with lower exposure rates have been detected but the level of reliability cannot be determined and is therefore not specified in the performance specification.
Description and Pricing System consists of Detector Assembly (2) a) Large Premium Grade PVT Scintillators (2,108 cu.in per detector) b) Low Density Shield on Face of Detector Panel c) Dual Layer of Thermal Protection (-20 0 C to 50 0 C) d) 95% Humidity Rating (Non-condensing) e) High Signal to Noise Ratio PMT f) High Speed Micro-Controller g) High Speed Pulse Processor h) Noise Reduction Hardware/Software i) Smart Infrared Vehicle Presence with Speed Monitoring j) Internal Non-Radioactive Test Source for Detailed and Repeatable System Checks. k) 24 Vdc Input Voltage @ 1.5 A l) Energy Range: 50KeV to 2.0MeV (Incident) m) Sensitivity: Typ. 0.08 counts/s/cm 3 /nsv/h -1 Vehicle Presence/Speed Sensors includes (2 sets): a) High Powered, Frequency Coded, Infrared Transmitter b) Infrared Receiver c) Protective Covers RC4000 Controller includes: a) Touch-Sensitive LCD Display b) High Speed Pentium Processing Unit c) Windows Based Software for Menu and Data Management d) Large Storage Capacity for System Operational Information and Alarms e) Easy to Follow Menu Outlines and Descriptions f) Multi-Level Security Password Control g) Detailed Alarm Data Storage h) Multilingual Menu Selection i) Easy to Set Alarm Configuration Menu j) Telephone Modem for Remote Service and Monitoring k) Radiation Levels Displayed in CPS (counts per second), nsv/h -1, µr/ h -1 l) Vehicle Speed Measurement in km/h and mph. m) Detailed Easy to Follow Detector and System Configuration Menu n) Adjustable Audio Alarm o) Detailed Alarm Information Displayed and Stored After Every Alarm p) Internal Non-Radioactive Test Source Test Touch-Key Activated q) French Language Software System Setup, Commissioning and Training a. The system wiring connections, software setup and commissioning will be completed by a Rad/Comm Systems service technician. All system software parameters will be adjusted a set during the on-site visit. After the software parameters have been adjusted and the system tested the system will be commissioned. After commissioning key customer personnel will trained on the system operation and alarms procedures. b. Included are transportation and local living expenses (with 2 weeks notice). Without 2 weeks notice there may be an additional airfare charge. c. Price is based on two separate trips installing 5 systems at a time..