STANDARD FEATURES NEW Factory authorized startup ENERGY STAR Qualified Exclusive Technology All-purpose 9" wide peg belt Dish capacities up to 5,07 dishes per hour (NSF Certified) Automatic tank fill Chemical dispensing equipment connection provisions Choice of tank heat: electric, steam coils or direct steam injectors Common hot water connection Common drain connection Common electric connection (separate connection required for optional electric booster and blower-dryer) One piece stainless steel wash/rinse manifold system, easy to remove Door safety switch Electric eye energy sentinel (idle pump shut-off) Easy-to-reach top-mounted controls Heavy-gauge stainless construction Low-water tank heat protection Push-button start-stop station load end Recirculating flushing nozzles load end with prewash saver device Conveyor shut-off shelf unload end Stainless steel enclosure panels front & ends Vent fan control connection provided OPTIONAL WORLD ASS FEATURES Heat Recovery redirects lost steam to heat using less energy Project Item No. Quantity SERIES Upright 9" Conveyor Dishwashing SPECIFIER STATEMENT Photo is for general visual representation only. Please refer to specifications for the latest detailed product information. Specified unit will be Champion model 4, 6 or 8 upright 9" conveyor water saver dishwashing machine. Features automatic tank fill, chemical dispensing connection provisions, common water, drain and electrical connections, door safety switch, low water tank heat protection, rinse saver. year parts and labor warranty. SERIES UPRIGHT CONVEYORS The Dual feature offers the Lowest Water/Utility/Chemical Consumption as low as 57 GPH usage while circulating as much as 400 gallons of water for Consistently Good Results CH04 674 N. Service Road, Jordan Station, Ontario, Canada L0R S0 Tel: 905-56-495 Fax: 905/56-468 (pdf) 8/7 Champion Industries, Inc. 765 Champion Boulevard, Winston-Salem, NC 705 Tel: 6/66-556 Fax: 6/66-979 www.championindustries.com
SERIES Upright 9" Conveyor Dishwashing 4 9" [99] 8-5/8" [47] " [05] MODULAR SECTIONS: Right to Left Operation 9'-4" - [845] 5'-8" [77] '-" [65] '-0" [559] Dimensions shown in inches and [millimeters] 9" [77] 6" [5] 7-/4" [946] 6-/4" [59] 4' [9] Overall Length C -/" [800] For Screen Removal B Unload 4' [9] Wash A Load ' '-6" 4" [0] [60] [76] 4" [0] 5-/" [40] 7" [78] 7" [78] " [05] 6" [94] / Dual 0. Wash Prewash 9" [48] Clear 8" [965] 00" [540] Door Removal 95" [4] 6" [575] 0-/" [66] TABLE A - Connection Only - Electric Heat 40 F/ C Rise 0kW Electric Built-in Booster 08/60/ 8 5 5 40/60/ 4 0 0 480/60/ 5 5 TABLE B - Booster Connection 08/60/ 7 00 00 40/60/ 49 75 75 480/60/ 74 90 90 -steam 08/60/ 5 5 70 F/9 C Rise - 8kW Electric Built-in Booster 08/60/ 50 60 60 40/60/ 44 50 50 480/60/ 0 0 Contact Factory for additional voltages. -5/8" [4] 40/60/ 8 5 5 480/60/ 0 5 5 Start/Stop Notes: Load Section (A) Standard 5', contains 0" Prewash Prewash also available in a 48" HD section Non-standard load section available in " increments load length 5' (includes 0" prewash) Unload Section (B) Standard 5 ft contains 4" Aux. and 6" belt, available in " increments Built in electric booster requires a 5' minimum unload Built in steam booster requires a minimum 6' unload Blow dryer section adds 4' to overall length of machine Champion Industries, Inc., 765 Champion Boulevard, Winston-Salem, NC 705 6/66-556 Fax: 6/66-979 www.championindustries.com 674 N. Service Road, Jordan Station, Ontario, Canada L0R S0 905/56-495 Fax: 905/56-468
SERIES Upright 9" Conveyor Dishwashing 6 9" [99] 8-5/8" [47] " [05] MODULAR SECTIONS: Right to Left Operation '-4" - [454] 5'-8" [77] Dimensions shown in inches and [millimeters] '-" [65] '-0" [559] 6" [5] 9" Clear [77] 7-/4" [946] 6-/4" [59] 4' [9] Overall Length C -/" [800] For Screen Removal B Unload 7" [78] 4" [0] ' [60] ' [94] 6' [89] Wash/ A Load ' '-6" [94] [76] 4" 5-/" [0] [40] 7" [78] " [05] 9" [48] Clear 00" [540] Door Removal 6" [94] / Dual 0. Power Wash Prewash 8" [965] 95" [4] 6" [575] 0-/" [66] -5/8" [4] Start/Stop TABLE A - Connection Only - Electric Heat 08/60/ 8 50 50 40/60/ 58 00 00 480/60/ 80 00 00 TABLE B - Booster Connection 40 F/ C Rise 0kW Electric Built-in Booster 08/60/ 8 5 5 40/60/ 4 0 0 480/60/ 5 5 -steam 08/60/ 9 40 40 70 F/9 C Rise - 8kW Electric Built-in Booster 08/60/ 50 60 60 Contact Factory for additional voltages. 40/60/ 6 5 5 480/60/ 4 0 0 40/60/ 44 50 50 480/60/ 0 0 Notes: Load Section (A) Standard 5', contains 0" Prewash Prewash also available in a 48" HD section Non-standard load section available in " increments load length 5' (includes 0" prewash) Unload Section (B) Standard 5 ft contains 4" Aux. and 6" belt, available in " increments Built in electric booster requires a 5' minimum unload Built in steam booster requires a minimum 6' unload Blow dryer section adds 4' to overall length of machine Champion Industries, Inc., 765 Champion Boulevard, Winston-Salem, NC 705 6/66-556 Fax: 6/66-979 www.championindustries.com 674 N. Service Road, Jordan Station, Ontario, Canada L0R S0 905/56-495 Fax: 905/56-468
SERIES Upright 9" Conveyor Dishwashing 8 9" [99] 8-5/8" [47] " [05] MODULAR SECTIONS: Right to Left Operation '-4" - [4064] 5'-8" [77] Dimensions shown in inches and [millimeters] '-" [65] '-0" [559] 9" [77] Clear 6" [5] 7-/4" [946] 4' [9] B Unload Overall Length C 8' [48] Wash/ -/" [800] For Screen Removal A Load ' 4' 4' '-6" 4" [0] [60] [9] [9] [76] [0] 5-/" 4" [40] 7" [78] 7" [78] 6-/4" [59] " [05] 6" [94] / Dual 0. Power Wash Prewash 9" [48] Clear 8" [965] 00" [540] Door Removal 95" [4] 6" [575] 0-/" [66] -5/8" [4] Start/Stop TABLE A - Connection Only - Electric Heat 08/60/ 8 50 50 40/60/ 58 00 00 480/60/ 80 00 00 TABLE B - Booster Connection 40 F/ C Rise 0 kw Electric built-in booster 08/60/ 8 5 5 40/60/ 4 0 0 480/60/ 5 5 -steam 08/60/ 9 40 40 40/60/ 6 5 5 480/60/ 4 0 0 70 F/9 C Rise 8kW Electric built-in booster 08/60/ 50 60 60 40/60/ 44 50 50 480/60/ 0 0 Contact Factory for additional voltages. Notes: Load Section (A) Standard 5', contains 0" Prewash Prewash also available in a 48" HD section Non-standard load section available in " increments load length 5' (includes 0" prewash) Unload Section (B) Standard 5 ft contains 4" Aux. and 6" belt, available in " increments Built in electric booster requires a 5' minimum unload Built in steam booster requires a minimum 6' unload Blow dryer section adds 4' to overall length of machine Champion Industries, Inc., 765 Champion Boulevard, Winston-Salem, NC 705 6/66-556 Fax: 6/66-979 www.championindustries.com 674 N. Service Road, Jordan Station, Ontario, Canada L0R S0 905/56-495 Fax: 905/56-468
SERIES Upright 9" Conveyor Dishwashing Shipping weight crated: 50 lbs./ft.[68kg./m.] with doors up: 95" to remove doors: 00" SPECIFICATIONS Capacities 4 6 8 Dishes per hr. (NSF rated) 9,965,445 5,07 Conveyor speed (ft./min.) 6. 8.5 9.5 Motor horsepower Drive / Hp / Hp / Hp Prewash 0" [76] Hp Hp Hp Prewash 48" [9] Hp Hp Hp Wash Hp Hp Hp Power * N/A Hp Hp Auxiliary /5 Hp /5 Hp /5 Hp Water consumption Gal. per hr. (max. use) 58 57 58 Temperatures F Wash (min.) 60 50 50 Power (min.)* N/A 60 60 Auxiliary (min.) 65 65 65 Final rinse (min.) 80 80 80 Heating Tank heat Steam Electric Wash tank 5 lbs./hr. 5 kw Wash tank (4) 5 lbs./hr. 45 kw tank * 00 lbs./hr. 0 kw Auxiliary rinse 50 lbs./hr. 0 kw Electric booster 0 0 0 (kw required for 40 F rise) Electric booster 8 8 8 (kw required for 70 F rise) Steam booster 50 50 50 (lbs./hr. required for 40 F rise) Steam booster 90 90 90 (lbs./hr. required for 70 F rise) Venting CFM, load end 00 CFM, unload end 800 CFM, unload end, with heat recovery 400 *4 has no power rinse tank Booster connections may vary. Contact the Factory. Standard Voltages (Specify choice): 08/60/, 40/60/, and 480/60/. Available in -phase only. For non-standard -phase voltages, contact the Factory. Notes Because of the variation in house-supplied water pressure, a water pressure regulating valve (PRV) is needed (water PRV is standard with a booster). Steam PRV s may be required for pressure higher than 0 psi. The PRVs can either be purchased from Champion or obtained locally. Utilities 4 Electrical Connection A connection (see table A) B Booster connection (see table A) Hot Water /4" NPT 80 F hot water connection. (For machine without built-in booster) Drain " NPT connection, 6 gpm max flow rate 4 Vents A Load end: 00 CFM /4" S.P. B Unload end: 800 CFM /4" S.P. With blower-dryer, increase room ventilation by 600 CFM. Utilities 6 Electrical Connection Contact factory for specific machine electrical requirements NOTE: Electric booster connection contact Factory Hot Water /4" NPT 80 F hot water connection. (For machine without built-in booster) Drain " NPT connection, 6 gpm max flow rate 4 Vents A Load end: 00 CFM /4" S.P. B Unload end: 800 CFM /4" S.P. With blower-dryer, increase room ventilation by 600 CFM. Utilities 8 Electrical Connection Contact factory for specific machine electrical requirements NOTE: Electric booster connection contact Factory Hot Water /4" NPT 80 F hot water connection. (For machine without built-in booster) Drain " NPT connection, 6 gpm max flow rate 4 Vents A Load end: 00 CFM /4" S.P. B Unload end: 800 CFM /4" S.P. With blower-dryer, increase room ventilation by 600 CFM. Warning and electrical connections should be made by qualified personnel who will observe all the applicable plumbing, sanitary, safety codes and the National Electrical Code. Note Water Hammer Arrestor (meeting ASSE-00 standard or equivalent) to be supplied (by others) in common water supply line at service connection. Venting Notes Fabricated duct size: -7/8" x -7/8" (outside dimensions) Champion Industries, Inc., 765 Champion Boulevard, Winston-Salem, NC 705 6/66-556 Fax: 6/66-979 www.championindustries.com 674 N. Service Road, Jordan Station, Ontario, Canada L0R S0 905/56-495 Fax: 905/56-468
SERIES UPRIGHT CONVEYOR SERIES Upright 9" Conveyor Dishwashing Control Panel OPTIONS & ACCESSORIES Tank heat; choices of electric, steam coil or steam injectors Booster Heaters stainless steel (completely inter-plumbed, controls are inter-wired) Electric: (40 F rise or 70 F rise) Steam: (40 F or 70 F rise) 48 Blower Dryer, electric or steam (add 4 to overall length) Belts: standard peg belt, flat belt, thermal tray belt, silverware belt, belts with upper cross rods, and other select combination belts Start/Stop station, unload end Back panels, stainless steel Cold water thermostat (for pre-wash) External scrap bucket on 48 pre-wash (standard on 0 pre-wash) External scrap bucket on wash tank Insulated hoods, lower panels Motor pumps, or Hp optional in lieu of Hp on pre-wash Bumper rail, machine mounted Steam pressure regulating valve (unmounted Digital Gauges Heat Recovery Redirects lost steam to heat using less energy. Water leaves booster at 80 F+ and travels to final rinse arms Booster Heated 0 F water travels back to booster 60 F incoming water to machine. Drain water tempering kit (mounted) Insulated hinged door Shock arrestor (water) Drain interlocks Heat Recovery Unit redirects lost steam to heat using less energy NEW Champion ION scale prevention system Champion Industries, Inc., 765 Champion Blvd., NC 705 6/66-556 Fax: 6/66-979 ChampionIndustries.com 8/7 an Ali Group Company The Spirit of Excellence
STANDARD FEATURES Automatic heat cutoff (when conveyor stops) Blower motor, -Hp Blower-Dryer vent cowl on exit end Choice of electric or steam heat Control circuit, 0-volt, completely interwired with dishwashing machine controls Project Item No. Quantity EBD-48-F Blower-dryer for Flight Conveyor Dishwashing s EBD-48-F BLOWER DRYER Heavy gauge stainless steel frame and cabinet vent connection Separate blower-dryer auto/off switch Thermal overload protection for electric blower-dryer 48" hood design SPECIFICATIONS Motor horsepower Heating Electric, (kw) Steam (lbs/hr. required at 5 psi flow pressure) 65 SPECIFIER STATEMENT Specified unit will be Champion model EBD-48-F blower-dryer for flight conveyor dishwashing machines. Features include automatic heat cut-off, Hp blower motor, vent cowl on exit end, separate auto/off switch for blower / dryer. year parts and labor warranty. This EBD-48-F catalog sheet is designed to be used in conjunction with the Champion Flight Conveyor Series catalog sheets. CH08 Champion Industries, Inc. 674 N. Service Road, Jordan Station, Ontario, Canada L0R S0 Tel: 905/56-495 Fax: 905/56-468 (M) 8/7 Printed in U.S.A. Champion Industries, Inc. 765 Champion Blvd., Winston-Salem, NC 705 Tel: 6/66-556 Fax: 6/66-979 www.championindustries.com
EBD-48-F Blower-dryer For Flight Conveyor Dishwashing s EBD-48-F Blower Dryer For Flight Electric Right-to-Left Left-to-Right 5" 7" 4" -/" 5-/" q Drain Width with Front Lower Panel Width Dimensions 4-/8" EUCC 8-7/8" EUCC NOT TO SCALE 0-/4" NOT TO SCALE EUCC qdrain Width with Front Lower Panel EUCC Width NOT TO SCALE Dimensions NOT TO SCALE 48" " (Hidden) Back Side of Cabinet 8-/" 48" " (Hidden) Back Side of Cabinet 8-/" 8-/8" 8-/8" 4-/8" 4-/8" -7/8" -7/8" 8B 8B 7-/4" 7-/4" 90-/" 90-/" R-L Electric Scale /8 64-5/8" 00" Door Removal 95" 6-/8" 00" Door Removal 95" 6-/8" 64-5/8" L-R Electric Scale /8 Model EBD Electric Heat Voltage Supply Circuit (Nontime delay) 08/60/ 40 50 50 40/60/ 5 45 45 480/60/ 7 5 5 575/60/ 5 0 0 EUCC, Utilities Electrical See chart 8B Vent Unload 800 CFM /4" S.P. Note: When machine is equipped with blower/dryer system, for normal size dishroom, the dishroom ventaliation shoud be increased by 600 CFM. Champion Industries, Inc., 765 Champion Blvd., Winston-Salem, NC 705 6/66-556 Fax: 6/66-979 www.championindustries.com 674 N. Service Road, Jordan Station, Ontario, Canada L0R S0 905/56-495 Fax: 905/56-468
EBD-48-F Blower-dryer For Flight Conveyor Dishwashing s EBD-48-F Blower Dryer For Flight Steam Right-to-Left Left-to-Right -/4" 6B 7B 5" 4" q Drain 7" -/" 5-/" Width with Front Lower Panel Width Dimensions 0-/4" EUCC Width with Front Lower Panel NOT TO SCALE 4-/8" 8-7/8" EUCC EUCC NOT TO SCALE NOT TO SCALE EUCC Width Dimensions NOT TO SCALE qdrain 6B -/4" 7B -5/8" 48" " (Hidden) Back Side of Cabinet 8-/" 48" 9-/8" " (Hidden) Back Side of Cabinet 8-/" -/4" 6B -5/8" 7B 8-/8" 8-/8" 4-/8" 4-/8" -7/8" -7/8" 8B 8B 7-/4" 7-/4" 90-/" 90-/" 7-/8" 64-7/8" 00" Door Removal 95" 6-/8" 64-5/8" 00" Door Removal 6-/8" 64-5/8" 64-7/8" 7-/8" R-L Steam Scale /8 L-R Steam Scale /8 6B 7B 7B 6B Model EBD Steam Heat Voltage Supply Circuit (Nontime delay) 08/60/ 7 5 5 40/60/ 6 5 5 480/60/ 5 5 575/60/ 5 5 Note: When machine is equipped with blower/dryer system, for normal size dishroom, the dishroom ventaliation shoud be increased by 600 CFM. EUCC, Utilities Electrical See chart 6B Steam /4" steam inlet connection 65 lbs./hr. @ 5-0 PSI 7B Condensate /" return to boiler (no back pressure) 8B Vent Unload 800 CFM /4" S.P. Notes: Blow dryer section adds 4' to overall length of machine Champion Industries, Inc., 765 Champion Blvd., Winston-Salem, NC 705 6/66-556 Fax: 6/66-979 www.championindustries.com 674 N. Service Road, Jordan Station, Ontario, Canada L0R S0 905/56-495 Fax: 905/56-468