January

2016-01-25 January 2016

1.0 MSB in brief 1.1 The Mauritius Standards Bureau (MSB) is the national standards body for the Republic of Mauritius. 1.2 MSB develops and publishes voluntary national standards for products and services in a wide range of technical areas including management systems and conformity assessment standards. 1.3 MSB provides calibration, testing and certification services. It operates a voluntary certification marking scheme for products and processes (MAURICERT), HACCP certification and the National Management Systems Certification Scheme including Quality Management Systems (ISO 9000), Environmental Management Systems (ISO 14000), Food Safety Management (ISO 22000) and Information Security Management Systems (ISO 27001). Moreover, MSB conducts training courses on quality management based on ISO 9000 for the public and private sectors. 1.4 MSB is also the National Enquiry Point for WTO TBT Agreement on Technical Barriers to Trade. 1.5 MSB is the National Enquiry Point for WTO TBT Agreement on Technical Barriers to Trade. MSB is a member of the International Organization for Standardization (ISO), an affiliate member of the International Electrotechnical Commission (IEC) and a member of the African Organisation for Standardisation (ARSO). 2.0 Standardization 2.1 The development of standards is carried out by consensus of all stakeholders grouped under various technical committees. There is a wide consultation process to secure comments on draft standards before these are published as Mauritian Standards. 2.2 MSB has a two-stage approach to developing standards, Standards Committees have been set up to oversee standards work in various technological areas, but detailed work on specific subjects is handled at the level of subcommittees. There are presently 13 Standards Committees and about 25 active subcommittees working on specific projects. 2.3 The objective of the Bureau is to harmonize the national standards with international or regional standards whenever these exist and are applicable. 2.4 The standards developed are voluntary; however, some Mauritian Standards have been referred in Legislation and are mandatory. 2.5 MSB is a member of ISO and participates in the work of several ISO Technical Committees for the development of ISO Standards and subsequently adopts them as National Standards. 2.6 MSB is a member of COMESA Standards Quality Assurance (SQA), SADCSTAN and ARSO and participates in the programme of harmonization of Standards in the region. 2 P age15

3.0 Stages in the development of a Mauritian Standard The table below shows the 3 main sequential stages for the development of a Mauritian Standard and gives the name of the document associated with each stage: STAGES ASSOCIATED DOCUMENT 1 Preparatory Committee Draft (CD) 2 Consultation Draft Mauritian Standard (DMS) 3 Finalization Mauritian Standard (MS) 4.0 Programme of work 4.1 MSB publishes a work programme for its standards development activities twice a year, in January and July, in the MSB Standards Update. This work programme covers the period July to December 2015. It lists the standards, which are currently being developed, including the revision of published Mauritian Standards and those standards that had been developed during the period January to June 2014. 4.2 The work programme is available free of charge from the Standards Development Division of MSB. It can also be consulted on the website of the Bureau. Mauritius Standards Bureau Villa Road Moka Mauritius Telephone: +230 433 3648 Fax: +230 433 5051/ 5150 E-mail: msb@intnet.mu Website: msb.intnet.mu How to use this publication 1.0 Mauritian Standards published from July to December 2016 Section A gives the list of Mauritian Standards, in numerical order, published during the period July to December 2016 1.1 Reference The of the Mauritian Standard and the year of publication. The prefix MS stands for Mauritian Standard and MS ISO denotes that the Mauritian Standard is identical with an ISO standard. Mauritian Standards which are identical with other regional or foreign National Standards are represented by dual ing including the MS reference and the reference of the adopted standard. 3 P age17

1.2 Title The title of the Mauritian Standard. 1.3 Gazette notification The date the Mauritian Standard was notified in the Government Gazette after approval by the Standards Council. 1.4 ICS Number, based on the International System for Classification of Standards, classifying the standards according to their subject matter. 1.5 Basis of the standard The reference of the international, regional or foreign national standard on which the Mauritian Standard has been based. The abbreviation IDT indicates that the Mauritian Standard is identical with the stated standard. 2.0 Standards developed/under development Section B lists the projects for each Standards Committee which have been approved for standardization including the revision of Mauritian Standards. 2.1 Reference The of the Mauritian Standard under development or revision. 2.2 Title The title of the Mauritian Standard under development or revision. 2.3 Stage This is indicated by the document associated with the corresponding stage in the standard development process as given at p 1, clause 3.0. The abbreviation NWI indicates a project which has been approved for standardization by the Standards Committee but the work at the subcommittee has not started yet. 2.4 ICS Number, based on the International System for Classification of Standards, classifying the standards according to their subject matter. 2.5 Basis of the standard The reference of the international, regional or foreign national standard which is being used for developing or revising the Mauritian Standard. 4 P age15

No Reference 1 MS ISO 5725 1:1994 + T Cor 1:1998 2 MS ISO 5725 2:1994 + T Cor 1:2002 3 MS ISO 5725 3:1994 + T Cor 1:2001 4 MS ISO 5725 4:1994 5 MS ISO 5725 5:1998 + T Cor 1:2005 6 MS ISO 5725 6:1994 + T Cor 1:2001 7 MS ISO/TR 22971:2005 8 MS ISO/IEC 13273 1:2015 9 MS ISO/IEC 13273 2:2015 10 MS IEC 60502 2:2014 11 MS 186: 2015 (BS 5499 4:2013) 12 MS 187: 2015 (BS 5499 10:2014) 13 MS ISO 16069:2004 14 MS ISO 16972: 2010 15 MS ISO 22322:2015 16 MS ISO 22324:2015 SECTION A MAURITIAN STANDARDS PUBLISHED July December 2016 Title Accuracy (trueness and precision) of measurement methods and results Part 1: General principles and definitions Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method Accuracy (trueness and precision) of measurement methods and results Part 3: Intermediate measures of the precision of a standard measurement method Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method Accuracy (trueness and precision) of measurement methods and results Part 5: Alternative methods for the determination of the precision of a standard measurement method Accuracy (trueness and precision) of measurement methods and results Part 6: Use in practice of accuracy values Accuracy (trueness and precision) of measurement methods and results Practical guidance for the use of ISO 5725 2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results. Energy efficiency and renewable energy sources Common international terminology Part 1: Energy efficiency Energy efficiency and renewable energy sources Common international terminology Part 2: Renewable energy sources Power cables with extruded insulation and their accessories for rated voltages from 1 kv (Um = 1,2 kv) up to 30 kv (Um = 36 kv) Part 2: Cables for rated voltages from 6 kv (Um = 7,2 kv) up to 30 kv (Um = 36 kv) Gov Gazette (Date) GN 1618 of 2015 (2015 08 15) ICS No. 03.120.30; 17.020 03.120.30; 17.020 03.120.30; 17.020 03.120.30; 17.020 03.120.30; 17.020 03.120.30; 17.020 03.120.30; 17.020 Safety signs: Code of practice for escape route signing 01.080.10 13.200 Guidance for the selection and use of fire safety notices safety signs and Graphical symbols Safety signs Safety way guidance systems (SWGS Respiratory protective devices Terms, definitions, graphical symbols and units of measurement Societal security Emergency management Public warning Societal security Emergency management Colourcoded alert 17 MS 184 1:2015 Specification for Good Agricultural Practices for Crop Production MauriGAP Part 1 Basic requirements 18 MS ISO 20346:2014 GN 1645 of 2015 (2015 08 22) Basis of standard ISO 5725 1:1994 + T Cor 1:1998 ISO 5725 2:1994 + T Cor 1:2002 ISO 5725 3:1994 + T Cor 1:2001 ISO 5725 4:1994 ISO 5725 5:1998 + T Cor 1:2005 ISO 5725 6:1994 + T Cor 1:2001 ISO/TR 22971:2005 27.010 MS ISO/IEC 13273 1 27.010 MS ISO/IEC 13273 2 29.060.20 IEC 60502 2:2014 01.080.10 13.200 01.080.20; 01.080.10 (BS 5499 4:2013) BS 5499 10:2014 ISO 16069:2004 13.340.30 ISO 16972:2010 03.100.01 ISO 22322 01.070; 03.100.01 ISO 22324 67.080 Local GAP Personal protective Equipment Protective footwear 13.340.50 ISO 20346:2014 5 P age17

19 MS ISO/TR 2801:2007 20 MS ISO/TR 21808:2009 21 MS ISO/IEC TR 27023:2015 22 MS ISO/IEC 27033 1:2015 23 MS ISO/IEC 17021 1:2015 24 MS ISO 4427 1:2007/ Amd1:2015 Clothing for protection against heat and flame General recommendations for selection, care and use of protective clothing Guidance on the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters Mapping the revised editions of ISO/IEC 27001 and ISO/IEC 27002 Network security Part 1: Overview and concepts Conformity assessment Requirements for bodies providing audit and certification of management system Part 1: Requirements Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 1: General GN 1645 of 2015 (2015 08 22) 13.340.10 ISO/TR 2801:2007 13.340.10 ISO/TR 21808:2009 35.040 ISO/IEC TR 27023 35.040 ISO/IEC 27033 1 03.120.20 ISO /IEC 17021 1 23.040.45; 23.040.20; 91.140.60; Amd1:2015 to ISO 4427 1:2007 25 MS ISO 4427 Plastics piping systems Polyethylene (PE) pipes and 23.040.20; AMD 1:2014 to 2:2007/ fittings for water supply Part 2: Pipes 91.140.60; ISO 4427:2:2007 GN 2022 of Amd1:2014 93.025 2015 26 MS 165:2015 Sustainable tourism Requirements (2015 10 03) GHTC 27 MS 210:2015 Energy efficiency and labelling requirements Vacuum cleaners 28 MS ISO 11611:2015 29 MS ISO 14116: 2015 30 MS ISO 14001:2015 31 MS ISO 9001:2015 32 MS ISO/IEC TS 17021 6:2014 33 MS ISO/IEC TS 17021 7:2014 34 MS ISO/IEC TR 17026:2015 Protective clothing for use in processes welding and allied Protective clothing Protection against flame Limited flame spread materials, material assemblies and clothing Environmental management systems Requirements with guidance for use Quality management systems Requirements 01.040.03 03.120.10 Conformity assessment Requirements for bodies providing audit and certification of management systems Part 6: Competence requirements for auditing and certification of business continuity management systems Conformity assessment Requirements for bodies providing audit and certification of management systems Part 7: Competence requirements for auditing and certification of road traffic safety management systems Conformity assessment Example of a certification scheme for tangible products GN 2058 of 2015 (2015 10 10) 97.080 CDR (EU) No 665/ 2013 of 03/05/2013 13.340.10 ISO 11611:2007 13.340.10 ISO 14116: 2015 13.020.10 ISO 14001 ISO 9001:2015 03.120.20 ISO/IEC TS 17021 6 03.120.20 ISO/IEC TS 17021 7 03.120.20 ISO/IEC TR 17026 35 MS ISO/IEC 27006:2015 36 MS ISO 28000:2007 37 MS ISO 28001:2007 38 MS ISO 28002:2011 39 MS ISO 28003:2007 40 MS ISO 20121:2012 Requirements for bodies providing audit and certification of information security management systems Specification for security management systems for the supply chain Security management systems for the supply chain Best practices for implementing supply chain security, assessments and plans Requirements and guidance Security management systems for the supply chain Development of resilience in the supply chain Requirements with guidance for use Security management systems for the supply chain Requirements for bodies providing audit and certification of supply chain security management systems Event sustainability management systems Requirements with guidance for use GN 2490 of2015 (2015 12 12) 35.040 ISO/IEC CD 27006 47.020.99 ISO 28000:2007 47.020.99 ISO 28001:2007 47.020.99 ISO 28002:2011 47.020.99 ISO 28003:2007 03.100.01; 13.020.01 ISO 20121:2012 6 P age15

SECTION B STANDARDS DEVELOPED/ UNDER DEVELOPMENT Building and Construction Standards Committee (TC 1) MS ISO 370101 Sustainable development of communities Management systems Requirements with guidance for resilience and smartness CD 13.020.20 ISO/DIS 37101 DMS EN 10255 MS EN 450 1:2012 Non alloy steel tubes suitable for welding and threading Technical delivery conditions Fly ash for concrete Specifications and conformity criteria MS EN 772 1:2011 Methods of test for masonry units Part 1: Determination of Compressive strength MS EN 933 1:2012 MS EN 12390 3:2009 Tests for geometrical properties of aggregates Part 1: Determination of particle size distribution Sieving method Testing hardened concrete Part 3: Compressive strength of test specimens CD 23.040.10 EN 10255 NWI 91.100.30 EN 450 1:2012 NWI 91.100.25 EN 772 1 NWI 91.100.15 EN 933 1:2012 NWI EN 12390 3:2009 MS EN 12620:2013 Aggregates for concrete NWI EN 12620:2013 MS ISO/TS 12720:2014 MS ISO 13153:2012 MS ISO 15392:2008 Sustainability in buildings and civil engineering works Guidelines on the application of the general principles in ISO 15392 Framework of the design process for energy saving single family residential and small commercial buildings Sustainability in buildings and civil engineering works General principles MS ISO 16813 Building environment design Energy efficiency Terminology MS ISO 23045:2008 MS ISO 21931 1:2010 MS ISO/TS 21929 2:2015 Building environment design guidelines to assess energy efficiency of new buildings Sustainability in building construction Framework for methods of assessment of the environmental performance of construction works Part 1: Buildings Sustainability in building construction Sustainability indicators Part 2: Framework for the development of indicators for civil engineering NWI 91.040.01 ISO/TS 12720:2014 NWI 91.040.01 ISO 13153:2012 NWI 91.040.01 ISO 15392:2008 NWI 91.040.01 ISO 16813 NWI 91.040.01 ISO 23045:2008 NWI 91.040.01 MS ISO 21931 1:2010 NWI 91.040.01 MS ISO/TS 21929 2:2015 7 P age17

Chemicals Standards Committee (TC 2) MS ISO 4074:2015 Natural rubber latex male condoms Requirements and test methods 11.200 ISO 4074:2015 MS ISO 4998:2014 MS 24:2015 Continuous hot dip zinc coated and zinc iron alloycoated carbon steel sheet of structural quality Specification for decorative high gloss enamel paint for interior and exterior use Due for Declaration in Gazette as DMS 77.140.50 ISO 4998:2014 25.220.99 87.040 MS 24 MS 185:2016 Microbial Bio fertilizers Part 1: Specification for nitrogen fixing bacteria MS 189 Criteria for Ecolabel for Paint Manufacturing CD 25.220.99 87.040 MS 11 Revision (2008) Synthetic laundry powder detergent for household use Specifications and test methods MS 185 NWI 71.100.40 MS 11 MS 87 Revision (1991) Road marking paints NWI 93.080.20 MS 87 MS ISO 10282:2014 Single use sterile rubber surgical gloves NWI 83.140.99; ISO 10282:2014 Specification 11.140 MS ISO 16075 1 MS ISO 16075 2 MS ISO 16075 3 MS ISO 16075 4 MS ISO 18642 MS ISO 18644 MS ISO 18645 MS ISO 20426 Guidelines for treated wastewater use for irrigation projects Part 1: The basis of a reuse project for irrigation Guidelines for treated wastewater use for irrigation projects Part 2: Development of the project Guidelines for treated wastewater use for irrigation projects Part 3: Components of a reuse project for irrigation Guidelines for treated wastewater use for irrigation projects Part 4: Monitoring Fertilizer and soil conditioners Fertilizer grade Urea General requirements Fertilizers and soil conditioners Controlled release fertilizer General requirements Fertilizers and soil conditioners Water soluble compound fertilizer General requirements Risk and performance evaluation of water re use systems Guidelines for health risk assessment and treatment for water re use NWI 13.060.01; 13.060.30 NWI 13.060.01; 13.060.30 NWI 13.060.01; 13.060.30 NWI 13.060.01; 13.060.30 MS ISO 16075 1 MS ISO 16075 2 MS ISO 16075 3 MS ISO 16075 4 NWI 65.080 MS ISO 18642 NWI 65.080 MS ISO 18644 NWI 65.080 MS ISO 18645 NWI 13.060.45; 13.060.01 ISO 20426 MS ISO 25841 Female condoms Requirements and test methods NWI 11.200 MS ISO 25841 MS ISO 29943 1 Condoms Guidance on clinical studies Part 1: Male condoms, clinical function studies based on selfreports MS ISO 29943 2 Condoms Guidance on clinical studies Part 2: Female condoms, clinical function studies based on self reports NWI 11.200 MS ISO 29943 1 NWI 11.200 MS ISO 29943 2 8 P age15

Electrical Engineering Standards Committee (TC 3) MS IEC 60670 1 Edition 2.0 2014 MS IEC 60947 1 Edition 5.1 2011 03 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 1: General requirements Low voltage switchgear and controlgear Part 1: General rules 29.120.10 IEC 60670 1 Edition 2.0 2014 29.130.20 IEC 60947 1 Edition 5.1 2011 03 MS IEC 60947 2 Low voltage switchgear and controlgear Part 2: Circuit breakers MS IEC 60947 3 Low voltage switchgear and controlgear Part 3: Switches, disconnectors, switch disconnectors and fuse combination units MS EN 14511 1:2013 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 1: Terms, definitions and classification Due for approval for Declaration in Gazette as final Mauritian Standards 29.130.20 IEC 60947 2 29.130.20 IEC 60947 3 01.040.91 ; 27.080; 91.140.30 EN 14511 1:2013 MS EN 14511 2:2013 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 2:Test conditions 01.040.91 ; 27.080; 91.140.30 EN 14511 2:2013 MS EN 14511 3:2013 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 3: Test methods 01.040.91 ; 27.080; 91.140.30 EN 14511 3:2013 MS EN 14511 4:2013 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 4: Operating requirements, marking and instructions 01.040.91 ; 27.080; 91.140.30 EN 14511 4:2013 MS EN 14825:2013 Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling. Testing and rating at part load conditions and calculation of seasonal performance 23.120; 27.080; 91.140.30 EN 14825:2013 MS 212:2015 Energy efficiency and labelling requirements water heaters, hot water storage tanks and packages of water heater and solar device 13.120; 91.140.65 CDR (EU) No 812/2013 of 18/2/ 2013 MS IEC 61400 1 Wind turbines Part 1: Design requirements 27.180 IEC 61400 1 21 Household and similar electrical appliances safety Part 2 21: particular requirements for storage water heaters 35 Ed 5.0 2012 11 ( Revision MS 48:1985) Household and similar electrical appliances Safety Part 2 35: Particular requirements for instantaneous water heaters Due for approval for Declaration in Gazette as DMS IEC 13.120; 91.140.65 13.120; 97.040.50 IEC 60335 2 21 IEC 60335 2 35 Ed 5.0 2012 11 MS IEC 61400 2 Wind turbines Part 2: Small wind turbines NWI 27.180 IEC 61400 2 MS IEC 61400 3 Wind turbines Part 3: Design requirements for offshore wind turbines NWI 27.180 IEC 61400 3 MS IEC 60950 1:2005 Information technology equipment Safety Part 1: General requirements CD 35.020; 35.260 IEC 60950 1:2005 9 P age17

MS IEC 60086 1 ed 1.1 (Revision MS 16:1980) Primary batteries Part 1: General NWI 29.220.10 IEC 60086 1 ed 1.1 MS IEC 603335 2 3:2012, + AMD1:2015 CSV, Part 2 3: Particular requirements for electric irons IEC 603335 2 3:2012, + AMD1:2015 CSV, 10:2002+AMD1:2008 CSV, Part 2 10: Particular requirements for floor treatment machines and wet scrubbing machines IEC 60335 2 10:2002+AMD1:2008 CSV, 12:2002+AMD1:2008 CSV, Part 2 12: Particular requirements for warming plates and similar appliances IEC 60335 2 12:2002+AMD1:2008 CSV, 25:2010, +AMD1:2014 CSV/AMD2:2015 PRV Part 2 25: Particular requirements for microwave ovens, including combination microwave ovens IEC 60335 2 25:2010, +AMD1:2014 CSV/AMD2:2015 PRV 26:2002 + AMD1:2008 CSV, Part 2 26: Particular requirements for clocks IEC 60335 2 26:2002 + AMD1:2008 CSV, 28:2002+AMD1:2008 CSV Part 2 28: Particular requirements for sewing machines IEC 60335 2 28:2002+AMD1:2008 CSV 30:2009, Part 2 30: Particular requirements for room heaters IEC 60335 2 30:2009, 31:2012, Part 2 31: Particular requirements for range hoods and other cooking fume extractor IEC 60335 2 31:2012, 32:2002 + AMD1:2008+AMD2:20 13 CSV, Part 2 32: Particular requirements for massage appliances IEC 60335 2 32:2002 + AMD1:2008+AMD2:2 013 CSV, 41:2012, Part 2 41: Particular requirements for pumps IEC 60335 2 41:2012, 78:2002+AMD1:2008 CSV, Part 2 78: Particular requirements for outdoor barbecues IEC 60335 2 78:2002+AMD1:2008 CSV, 80:2008, IEC 60335 2 80:2015 RLV, Household and similar electrical appliances Safety Part 2 80: Particular requirements for fans 80:2008, IEC 60335 2 80:2015 RLV, 98:2002 + AMD1:2004 + AMD2:2008 CSV, Part 2 98: Particular requirements for humidifiers IEC 60335 2 98:2002 + AMD1:2004 + AMD2:2008 CSV, MS IEC 60669 2 1:2002 + AMD1:2008+AMD2:20 15 CSV, Switches for household and similar fixed electrical installations Part 2 1: Particular requirements Electronic switches EC 60669 2 1:2002 + AMD1:2008+AMD2:2 015 CSV, MS IEC 60898 1:2015, Electrical accessories Circuit breakers for overcurrent protection for household and similar installations Part 1: Circuit breakers for a.c. operation IEC 60898 1:2015, 10 P age15

MS IEC 60898 1:2015, Electrical accessories Circuit breakers for overcurrent protection for household and similar installations Part 1: Circuit breakers for a.c. operation IEC 60898 1:2015, MS IEC 60947 1:2007 AMD1:2010+AMD2:20 14 CSV, Low voltage switchgear and controlgear Part 1: General rules IEC 60947 1:2007 + AMD1:2010+AMD2:2 014 CSV, MS IEC 60947 2:2006 AMD1:2009+AMD2:20 13 CSV, Low voltage switchgear and controlgear Part 2: Circuit breakers IEC 60947 2:2006 + AMD1:2009+AMD2:2 013 CSV, MS IEC 60947 3:2008 AMD1:2012+AMD2:20 15 CSV, Low voltage switchgear and controlgear Part 3: Switches, disconnectors, switch disconnectors and fuse combination units CIEC 60947 3:2008 + AMD1:2012+AMD2:2 015 CSV, MS IEC 61058 2 1:2010, Switches for appliances Part 2 1: Particular requirements for cord switches IEC 61058 2 1:2010, MS IEC 61242:1995, Electrical accessories Cable reels for household and similar purposes IEC 61242:1995, Food and Agriculture Standards Committee (TC 4) MS 39 Revision (1983) Amend 1:2015 to MS 30:2008 MS ISO 12878 MS ISO 16541 MS ISO 22000 Standard for Canned Tomato Concentrates GN 1644 of Labelling of prepackaged foods 67.080 Codex 2015) Environmental monitoring of the impacts from marine finfish farms on soft bottom Methods for sea lice surveillance on marine finfish farms Food safety management systems Requirements for any organization in the food chain MS ISO TS 22002 5 Prerequisite programmes on food safety Part 5: Transport and storage DMS 67.080 Codex Stan 13 NWI 65.150 ISO 12878 NWI 67.120.30 ISO 16541 NWI 67.040 ISO 22000 NWI 67.040 ISO TS 22002 5 MS ISO TS 22002 6 Prerequisite programmes on food safety Part 6: Feed production NWI 67.040 ISO TS 22002 6 MS ISO TS 34700 MS 37 Revision (1984) MS 38 Revision (1983) MS 83 Revision (1988) MS 184 2 Animal welfare management General requirements and guidance for organizations in the food supply chain NWI 67.020 ISO/WD TS 34700 Specification for White and wholemeal wheat bread NWI 67.060 Indian Standard 1483, IS 1960 Standard for Canned Processed Peas NWI 67.080 Codex Stan 41 Specification for canned sardines and sardine type products Specification for Good Agricultural Practices for Crop Production MauriGAP Part 2 Advanced requirements NWI 67.080 Codex Stan 94 NWI 67.080 Local GAP 11 P age17

MS 184 3 Specification for Good Agricultural Practices for Crop Production MauriGAP Part 3 GlobalGAP NWI 67.080 Local GAP MS ISO 12824 Royal jelly Specifications NWI 67.180.10 ISO 12824 MS 193 Standard for White Sugar NWI Codex Stan 212 MS 194 Standard for Raw Sugar NWI Codex Stan 212 MS 195 Good Aquaculture Practice NWI CAC RCP 52 MS XXX. Standard for wheat flour NWI 67.060 Cacodex Stan 152 MS XXX. Standard for Honey NWI 67.080 Codex Stan 12 Information Technology Standards Committee (TC 5) MS ISO/IEC 27010:2015 Information security management for inter sector and inter organizational communications MS ISO/IEC 27013:2015 Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000 1 MS ISO/IEC 27017:2015 MS ISO/IEC 27009 FDIS Stage: 50.00 MS ISO/IEC 27011 (DIS Stage: 40.60) MS ISO/IEC 27000 (Under publication Stage: 60.00) IT Security techniques Code of practice for information security controls based on ISO/IEC 27002 for cloud services The Use and Application of ISO/IEC 27001 for Sector/Service Specific Third Party Accredited Certifications Information security management guidelines for telecommunications organizations based on ISO/IEC 27002 IT Security techniques Information security management systems Overview and Vocabulary MS 191 Criteria for Ecolabel for Information And Communication Technology Due for Declaration in Gazette as MS ISO / IEC Due for approval by SC for final Declaration as MS ISO / IEC DMS GN 2021 of 2015) DMS GN 770 of 02/05/2015 CD 35.040 MS 192 Criteria for Ecolabel for Personnal computers CD 35.040 MS ISO/IEC 27003 (DIS Stage: 40.00) MS IEC 27004 (DIS Stage: 40.00) MS ISO/IEC 27036 4 (DIS Stage: 40.20) Information security management system implementation guidance Information security management Measurement Information technology Security techniques Information security for supplier relationships Part 4: Guidelines for security of cloud services 35.040 ISO/IEC 27010:2015 35.040 ISO/IEC 27013:2015 35.040 ISO/IEC 27017:2015 35.040 ISO/IEC 27009 35.040 ISO/IEC 27011 35.040 ISO/IEC 27000 CD 35.040 ISO/IEC 27003 CD 35.040 ISO/IEC WD 27004 CD 35.040 ISO/IEC 27036 4 12 P age15

MS ISO/IEC 27007 (NP Stage: 10.99) Guidelines for information security management systems auditing NWI 35.040 ISO/IEC 27007 MS ISO/IEC TR 27008 (NP Stage: 10.99) Guidelines for auditors on information security controls MS ISO/IEC 27034 2:2015 Application security Part 2: Organization normative framework MS ISO/IEC 27034 3 (CD Stage: 30.20) Application security Part 3: Application security management process MS ISO/IEC 27034 4 :2014 Application security Part 4: Application security validation MS ISO/IEC 27034 5 (CD Stage: 30.20) MS ISO/IEC 27034 6.2 (DIS Stage: 40.20) MS ISO/IEC 27034 7 (CD Stage: 30.20) MS ISO/IEC TS 27034 5 1 (PD Stage: 30.60) Application security Part 5: Protocols and application security controls data structure Application security Part 6: Security guidance for specific applications Information technology Application security Part 7: Application security assurance prediction Information technology Application security Part 5 1: Protocols and application security controls data structure XML schemas MS ISO/IEC 27035:2011 Information security incident management MS ISO/IEC 27035 1 (FDIS Stage: 50.00) MS ISO/IEC 27035 2 (FDIS Stage: 50.00) MS ISO/IEC TS 27035 3 (PD Stage: 30.20) Information security incident management Part 1: Principles of incident management Information security incident management Part 2: Guidelines to plan and prepare for incident response Information security incident management Part 3: Guidelines for CSIRT operations MS ISO/IEC 27040:2015 Storage security MS ISO/IEC 27044 MS ISO/IEC 29003 (CD Stage: 30.60) MS ISO/IEC 29151 (CD Stage: 30.60) Guidelines for Security Information and Event Management (SIEM) Identity proofing NWI 35.040 ISO/IEC TR 27008 NWI 35.040 ISO/IEC 27034 2:2015 NWI 35.040 ISO/IEC 27034 3 NWI 35.040 ISO/IEC 27034 4 :2015 NWI 35.040 ISO/IEC 27034 5 NWI 35.040 ISO/IEC 27034 6 NWI 35.040 ISO/IEC 27034 7 NWI 35.040 ISO/IEC 27034 5 1 NWI 35.040 ISO/IEC 27035:2011 NWI 35.040 ISO/IEC 27035 1 NWI 35.040 ISO/IEC 27035 2 NWI 35.040 ISO/IEC 27035 3 NWI 35.040 ISO/IEC 27040:2015 NWI 35.040 ISO/IEC 27044 NWI 35.040 ISO/IEC 29003 Code of practice for PII protection NWI 35.040 ISO/IEC 29151 MS ISO/IEC TS 30104:2015 Information Technology Security Techniques Physical Security Attacks, Mitigation Techniques and Security Requirements MS ISO/IEC 18045:2008 Methodology for IT security evaluation. NWI 35.040 ISO/IEC TS 30104:2015 NWI 35.040 ISO/IEC 18045:2008 13 P age17

Mechanical Engineering Standards Committee (TC 6) MS EN 26 Gas fired instantaneous water heaters for the production of domestic hot water NWI EN 26 MS EN 397 Industrial safety helmets NWI EN 397 MS EN 16129 MS EN 16436 1 Pressure regulators, automatic change over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures Rubber and plastics hoses, tubing and assemblies for use with propane, commercial butane and their mixture in the vapour phase Part 1: Hoses and tubings NWI EN 16129 NWI EN 16436 1 MS ISO 4007:2012 Personal protective equipment Eye and face protection Vocabulary NWI 13.340.20; 01.040.13 ISO 4007:2012 MS ISO 4849:1981 Personal eye protectors Specifications NWI 13.340.20 ISO 4849:1981 MS ISO 7165 Fire fighting Portable fire extinguisher Performance and construction MS ISO/TS 16974 :2011 Respiratory protective devices Marking and information supplied by the manufacturer MS ISO 20712 3:2014 Water safety signs and beach safety flags Part 3: Guidance for use NWI 13.220.10 ISO 7165 NWI 13.340.30 ISO/TS 16974 :2011 NWI 01.080.10 ISO 20712 3:2014 Metrology Standards Committee (TC 7) MS ISO 4225: 1994 Air quality General aspects Vocabulary 13.040.01; 01.040.13 ISO 4225: 1994 MS ISO 18589 2:2015 Measurement of radioactivity in the environment Soil Part 2: Guidance for the selection of the sampling strategy, sampling and pre treatment of samples MS EN 12645:2014 Pressure gauges Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles Metrology, requirements and testing Due for Declaration in Gazette as DMS 17.240; 13.080.01 17.100; 43.180; 83.160.10 ISO 18589 2:2015 EN 12645:2014 MS ISO/NP 15197 MS ISO 9849 (CD Stage: 30.60) ISO 17123 1:2014 ISO 17123 2:2001 ISO 17123 3:2001 14 P age15 In vitro diagnostic test systems Requirements for blood glucose monitoring systems for self testing in managing diabetes mellitus Optics and optical instruments Geodetic and surveying instruments Vocabulary Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 1: Theory Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 2: Levels Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 3: Theodolites NWI ISO/NP 15197 NWI 17.180.30; 01.040.17 ISO 9849, NWI 17.180.30 ISO 17123 1:2014 NWI 17.180.30 ISO 17123 2:2001 NWI 17.180.30 ISO 17123 3:2001

Textile, Paper and Footwear Standards Committee (TC 8) MS ISO /TS 19407:2015 Footwear Sizing Conversion of sizing systems DMS (GN 2491 of 2015) 61.060 ISO /TS 19407:2015 MS ISO/TS 19408:2015 Footwear Sizing Vocabulary and terminology Due for Declaration in Gazette as DMS 01.040.61; 61.060 ISO/TS 19408:2015 MS 188 Criteria for Ecolabeling for Textile Products CD 13.340.10 MS ISO 11612 MS ISO 11613:1999 Protective clothing Clothing to protect against heat and flame Protective clothing for firefighters Laboratory test methods and performance requirements CD 13.340.10 ISO 11612:2007 NWI 13.340.10 ISO 11613:1999 MS ISO 13998:2003 MS ISO 16602:2007/ Amd 1:2012 Protective clothing Aprons, trousers and vests protecting against cuts and stabs by hand knives Protective clothing for protection against chemicals Classification, labeling and performance requirements ISO TR 19591 Personal protective equipment for firefighters Standard terms and definitions NWI 13.340.10 ISO 13998:2003 NWI 13.340.10 ISO 16602:2007/ Amd 1:2012 NWI ISO TR 19591 MS EN 15090:2012 Revision MS 155:2008 Footwear for firefighters NWI 13.340.50 EN 15090:2012 Conformity Assessment Standards Committee (TC 9) MS ISO/PAS 17001:2005 15 P age17 Conformity assessment Impartiality Principles and requirements MS ISO/PAS 17002:2004 Conformity assessment Confidentiality Principles and requirements MS ISO/PAS 17003:2004 Conformity assessment Complaints and appeals Principles and requirements MS ISO/PAS 17004:2005 Conformity assessment Disclosure of information Principles and requirements MS ISO/PAS 17005:2008 MS ISO/IEC 17011 MS ISO/IEC 17025 MS ISO/iec 17028 MS ISO/IEC 17034 Conformity assessment Use of management systems Principles and requirements Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies General requirements for the competence of testing and calibration laboratories Conformity assessment Example of a certification scheme for services General requirements for the competence of reference material producers Due for Declaration in Gazette as MS ISO / IEC 03.120.20 ISO/PAS 17001:2005 03.120.20 ISO/PAS 17002:2004 03.120.20 ISO/PAS 17003:2004 03.120.20 ISO/PAS 17004:2005 03.120.20 ISO/PAS 17005:2008 NWI 03.120.20 ISO/IEC 17011 NWI 03.120.20 ISO/IEC 17025 NWI 03.120.20 ISO/IEC 17028 NWI 03.120.20 ISO/IEC 17034

Energy Management Standards Committee (TC 10) MS ISO 17741:2014 MS ISO 17743 General technical rules for measurement, calculation and verification of energy savings of projects Energy savings Definition of a methodological framework applicable to calculation and reporting on energy savings MS ISO 17747 Determination of energy savings in organizations DMS MS ISO 50007 (DIS Stage: 40.20) ISO 20364, (AWI Stage: 20.00) ISO 20366, (AWI Stage: 20.00) ISO 20375 (AWI Stage: 20.00) ISO 20376 (AWI Stage: 20.00) ISO20619 (AWI Stage: 20.00) ISO 50001 ISO 50008 (AWI Stage: 20.00) Activities relating to energy services Guidelines for the assessment and improvement of the service to users Energy Savings Evaluation Economics and financial evaluation of energy saving projects) General quantification methods for ex ante or expected energy savings Technical guidelines for evaluation of energy savings of thermal power plants General guidelines for selecting energy savings evaluators GN 2021 of 2015) 27.010 ISO 17741:2014 27.010 ISO 17743 27.010 ISO 17747 NWI 27.010 ISO/DIS 50007, NWI ISO AWI 20364, NWI ISO AWI 20366, NWI ISO AWI 20375 NWI ISO AWI 20376 Calculation methods for energy savings NWI ISO/AWI 20619 Energy management Systems A practical guide for SMEs Commercial building energy data management for energy performance Guidance for a systemic data exchange approach NWI ISO 50001 NWI 27.010 ISO/AWI 50008 Environmental Management Standards Committee (TC 11) MS ISO 24801 1:2014 MS ISO 24801 2:2014 MS ISO24801 3:2014 MS ISO 24802 1:2014 MS ISO 24802 2:2014 MS ISO 18065:2015 Recreational diving services Requirements for the training of recreational scuba divers Part 1: Level 1 Supervised diver Recreational diving services Requirements for the training of recreational scuba divers Part 2: Level 2 Autonomous diver Recreational diving services Requirements for the training of recreational scuba divers Part 3: Level 3 Dive leader RDS Requirements for the training of scuba instructors Part 1: Level 1 RDS Requirements for the training of scuba instructors Part 2: Level 2 Natural protected areas Tourist services for public use provided by Natural Protected Areas Authorities Requirements Due for Declaration in Gazette as MS ISO / IEC DMS GN 2021 of 2015) 03.200; 03.080.30 03.200; 03.080.30 03.200; 03.080.30 03.200; 03.080.30 03.200; 03.080.30 03.080.30; 03.200 ISO 24801 1 (NP) ISO 24801 2 (NP) ISO 24801 3 (NP) ISO 24802 1:2014 ISO 24802 2:2014 ISO 18065:2015 16 P age15

MS ISO 13009 Beaches Criteria to render the service NWI 03.200; 03.080.30 MS ISO 14004 (revision) MS ISO 14021 (Revision) MS ISO Amd 1 14024:1999 Environmental management systems General guidelines on principles, systems and support techniques Environmental labels and declarations Selfdeclared environmental claims (Type II environmental labeling) Environmental labels and declarations Type I environmental labelling Principles and procedures MS ISO TS 14027 Environmental labels and declarations Type III environmental declarations Product Category Rule (PCR) development MS ISO /TS 14073 Environmental management Water footprint Illustrative examples on how to apply ISO 14046 MS ISO 24803 Recreational diving services Requirements for recreational scuba diving service providers ISO 13009 NWI 13.020.10 ISO 14004 NWI 13.020.50 ISO 14021 NWI 13.020.50 ISO Amd 1 14024:1999 NWI 13.020.50 ISO TS 14027 NWI 13.020.60 ISO /TS 14073 NWI 03.200; 03.080.30 ISO 24803 Quality Assurance and Quality Management Standards Committee (TC 12) MS ISO 9000:2015 Quality management systems Fundamentals and vocabulary Due for Declaration in Gazette as MS ISO 01.040.03 03.120.10 ISO 9000:2015 MS ISO TS 9002 Quality management systems Guidelines for the application of ISO 9001:2015 NWI 01.040.03 03.120.10 ISO 9002 Safety and Security Standards Committee (TC 13) formerly Societal Security and Welfare Standards Committee (TC 13) MS ISO 28000:2007 Specification for security management systems for the supply chain MS ISO 28001:2007 Security management systems for the supply chain Best practices for implementing supply chain security, assessments and plans Requirements and guidance MS ISO 28002:2011 Security management systems for the supply chain Development of resilience in the supply chain Requirements with guidance for use MS ISO 28003:2007 Security management systems for the supply chain Requirements for bodies providing audit and certification MS ISO 20121:2012 Event sustainability management systems Requirements with guidance MS ISO 34001 Security management system Fraud countermeasures and controls DMS GN 2021 of 2015) ISO 28000:2007 ISO 28001:2007 ISO 28002:2011 ISO 28003:2007 ISO 20121:2012 ISO 34001 17 P age17

MS ISO 18788 Management Systems for private security operations Requirements with guidance NWI 03.080.20 ; 13.310 ISO 18788 MS ISO 22315 Societal security Mass evacuation Guidelines for planning NWI 03.100.01 ISO 22315. MS ISO 22316 Societal security Organizational resilience Principles and guidelines MS ISO TS 22317 MS ISO TS 22318 Societal security Business continuity management systems Business impact analysis (BIA) Societal Security Business continuity management Guidance for supply chain continuity MS ISO 22325 Societal security Emergency management Guidelines for emergency management capability assessment MS ISO/TR 22351 Societal security Emergency management Shared situation awareness NWI 03.100.01 ISO 22316 (NP) NWI 03.100.01 ISO TS 22317 NWI 03.100.01 ISO TS 22318 NWI 03.100.01 ISO 22325 NWI 03.100.01 ISO 22351 MS ISO 37001 Anti bribery management systems NWI 03.100.01 ISO 37001 MS ISO 45001 Occupational health and safety management systems Requirements with guidance for us NWI 13.100 ISO 45001 Note: MS xxx - Number of the MS, yet to be allocated KF Ho Fong MSB 2015.01.25 18 P age15